Professional Documents
Culture Documents
com/str/dnccnc
DNC Transmitter
TITAN
User manual
1
TITAN DNC: https://www.ebay.com/str/dnccnc
1. Design Features & Features
2
TITAN DNC: https://www.ebay.com/str/dnccnc
2.4 inch LCD screen, 65536 colors: program display, File & Folder list, intuitive and dynamic ...
2Gb / 4Gb / 8Gb internal memory for storing and
Power ON / OFF switch managing the program
Two USB 2.0 ports
RS232 and Parallel 50-pin communication
04 magnets for easy installation
06 button: RESET, FUNCTION, BACK, SET, UP, DOWN
Functions: COPY-PASTE, CUT-PASTE, RENAME, NEW FOLDER, DELETE File & Folder
management, USB data management and MEMORY
AUTO CUTTING feature - Allows you to set Cut Per Percentage (%) and Cut Number by Line
Number (N); View the content of the program after cutting
SEND feature - Transmit program for CNC machine, view G-code content being transmitted
FORCED SEND - Forces the program into a CNC machine
RECEIVE - Receive program / Parameter from CNC machine
2. Power to TITAN
When pinning the RS232 cable that can not power TITAN, the installer can manually
connect DC24V power from the CNC machine to the 25 pin of DB25.
For parallel transmission, the CNC machine is powered by a 50-pin cable. Pin the cable to
TITAN for power.
2.2. External power supply
When it is not possible to obtain power from a CNC machine, it is necessary to provide
external power to TITAN using a separate power supply.
Output ≥ 1.5A
current
3
TITAN DNC: https://www.ebay.com/str/dnccnc
It is recommended to use Adapter with wide input voltage range to take advantage of 100VAC
1A available on CNC machine.
4. Installation instructions
Way to install:
Press the RESET button and then hold down the SET button until the setting appears.
Or press the FUCTIONS button, select the item:
4
TITAN DNC: https://www.ebay.com/str/dnccnc
4.1. Save & Exit
- After install complete, select 1. Save & Exit to save the information and exit from install pages.
- Or click node BACK at Main Menu with the Save & Exit.
4.2. Load Default
- If you want to keep the previous settings information, select NO.
- If you want to enter the default value, select YES.
- SET button to select.
Communication/Protocol RS232
Communication/Code ASCII/ISO
Communication/Data Bits 7
Communication/Parity EVEN
Communication/Stop Bits 2
Communication/Line Delay 0
4.3. Drive
MEMORY & USB: Use USB and MEMORY.
USB ONLY: Use only USB.
MEMORY ONLY: Use only MEMORY.
5
TITAN DNC: https://www.ebay.com/str/dnccnc
4.4. Communication
Protocol
RS232 PARALLEL
Flow Control SOFTWARE Speed F1 (350bytes/s)
HARDWARE F2 (400bytes/s)
F3 (450bytes/s)
F4 (500bytes/s)
F5 (550bytes/s)
F6 (600bytes/s)
F7 (650bytes/s)
Code ASCII / ISO Code ISO
EIA EIA
Baudrate 1200
2400
4800
9600
19200
38400
115200
Data Bits 7
8
Parity NONE
EVEN
ODD
Stop Bits 1
2
Line Delay (EOL) 0 ÷ 255
6
TITAN DNC: https://www.ebay.com/str/dnccnc
4.5. Miscellaneous
Memory Capacity: Check the capacity of MEMORY
Format Drive:
If open in MEMORY, selecting this entry will go to Format MEMORY again.
If open in USB, when selecting this item will go to Format USB again.
Select YES to start Format.
View mode:
Choose how to display the program when transmitting.
SEND Monitoring ON: During RS232 transmission, the program will display the screen
during transmission.
7
TITAN DNC: https://www.ebay.com/str/dnccnc
SEND Monitoring OFF: RS232 transmission will not show the program but only show
transmitted percentage (%) and number of transmitted commands (N).
When transmitting at high speed (Baudrate> 19200), SEND Monitoring OFF should be
selected so that the baud rate is guaranteed.
1. COPY – PASTE
Use COPY-PASTE to copy a file from the source folder to the destination folder.
Step 1: Use the UP / DOWN / BACK / SET buttons to select the file to copy.
Step 3: Use the UP / DOWN / BACK / SET buttons to navigate to the destination folder.
8
TITAN DNC: https://www.ebay.com/str/dnccnc
Step 5: Wait for the copy process to
proceed
Note:
- The file copy speed is 30Mbytes / min (0.5Mb / s).
- If there is a file with the same name as the duplicate file, it will be overwritten do not ask.
2. CUT – PASTE
Use CUT-PASTE to cut a file from the source folder to the destination folder.
Step1: Use the UP / DOWN / BACK / SET buttons to select the file you want to cut.
Step 3: Use the UP / DOWN / BACK / SET buttons to navigate to the destination folder.
3. RENAME
Use RENAME to rename the file or folder.
Step 1: Use the UP / DOWN / BACK / SET buttons to select the file / folder to rename.
9
TITAN DNC: https://www.ebay.com/str/dnccnc
Step 2: Press the FUNCTIONS button,
select RENAME
When renaming files, only change the name, can not change the file extension.
4. NEW FOLDER
Use to create a new folder
Step 1: Use the UP / DOWN / BACK / SET buttons to navigate to the directory.
The default name is automatically set to New Folder x, where x is the sequence number.
If you want to get the default name, press the SET button.
5. DELETE
Use to delete File or Folder
Step 1: Use the buttons: UP / DOWN / BACK / SET to go to File / Folder to delete.
10
TITAN DNC: https://www.ebay.com/str/dnccnc
Only delete empty folders
6. SEND
Transfer program to CNC machine
11
TITAN DNC: https://www.ebay.com/str/dnccnc
Step 4: After completing transmission,
TITAN will automatically READY for the
next transmission (T number increases
by one unit).
Continue transmission, or press the
BACK button to exit.
7. FORCED SEND
Forcing a program into a CNC machine without the required signal from a CNC machine (Skip
XON)
8. RECEIVE
Get program / parameter from CNC machine
Step 1: Use the buttons: UP / DOWN / BACK / SET to go to the desired folder containing the
receiving file.
12
TITAN DNC: https://www.ebay.com/str/dnccnc
Step 3: Name the file received by
the keyboard:
- Use the UP / DOWN buttons to
move to the desired character.
- Press SET to select the
character.
- Press the BACK button to
backspace.
- Press the FUNCTIONS button to
create a blank space.
- - Select ENTER to complete the
naming.
13
TITAN DNC: https://www.ebay.com/str/dnccnc
Step 6: Wait for the reception process to
finish, then the FINISH display and
automatically exit.
9. AUTO CUTTING
Automatic program cut feature
Step 1: Use the UP / DOWN / BACK / SET buttons to select the file you want to cut.
14
TITAN DNC: https://www.ebay.com/str/dnccnc
Step 5: Wait for the cutting process to
proceed.
At the beginning of the program after cutting, TITAN always performs the structured
program as follows:
% % Early program
… … Pass the code needed (S, M, G, T ...)
F1000 F1000 Run to the point (X, Y) at the speed of
G1XxxxYxxx F1000, where (X, Y) is the starting
G1XxxxYxxx
coordinates of the next machining.
F100
F100 Down the Z axis at a speed of F100 to
Zxxx the depth of further processing
Zxxx
Fxxx
Fxxx Get the right speed at the starting point
…
… Continue to transmit the remaining
processing program
Warnings during cutting:
Error : “Not support Gxx” The cutting process detected in the
program that needs to be cut out
containing non-G-code (eg G81,
G83 ...) will warn the error: can not
cut because this G-code is not
supported.
Error: “Line number too large” If you set the number of commands
larger than the actual command
16
TITAN DNC: https://www.ebay.com/str/dnccnc
number of the program, then the
error.
For machining programs with multiple knives, the cutting process will allow the CNC
machine to replace the current knife to the knife.
After the cut is complete, the machine runs in Single Block and Dry Run mode to
execute each statement in advance, to check the optimal cutting percentage.
10. SETTINGS
Go to the settings page.
17
TITAN DNC: https://www.ebay.com/str/dnccnc