Professional Documents
Culture Documents
Assessment–YOKOHAMA-Batch-9 2022
Subject: Metrology
Course: YOKOHAMA Date: 19-08-2022
Time: 30mins Max Marks: 25 M
Name of the Trainee: ID No:
6. For the Dimension to be measured using Vernier choose the correct formula?
(A) MSR+VSRXLC (B) MSR+ (VSRXLC) (C) VSR+MSRXLC (D) None of the above
9. When Thimble Completes Its One Revolution Then Spindle Moves In Axial Direction Of 0.5mm
Which Is Called as
(A)Division (B) Direction (C) Pitch (D) None of the above
10. Calculate The Readings?
(A) 28deg 5mins (B) 28deg 15mins (C) 29deg 5mins (D) 2deg 15mins
14. A tool used for testing the space between two surfaces?
(A)Plug Thread gauge (B) Wire gauge (C) Radius gauge (D) Feeler Gauge
15. The dial indicators or dial gauges are generally used for testing?
(A) Flatness of surfaces (B) Parallelism of bars and rods.
(C)Testing the machine tools. (D) All the Above
16. Define tolerance? Find out the tolerances for the following problem? 5m