Professional Documents
Culture Documents
Resume
Shaik Hussain Ali
Kurnool. A. P, India,518112
Mobile: +918977770102
Email:hussainali.ali4@gmail.com
OBJECTIVE
• To work towards the mutual benefit of the organization & myself, in cohesion to the best of the
ethical & corporate principles.
SUMMARY
A total of 7 Years 1 months of experience on LabVIEW, Teststand, Veristand, C sharp
development and Validation activities
NI CLD certified developer
Currently working as Tech Lead at Tech Mahindra Hyderabad.
Hands on experience on Defect tracking tools like JIRA and Bugzilla and Zenhub bug tracking
tool, configuration management tools SVN and Source Tree (GitHub)
Experience in creating wrappers drivers for NI and third-party Hardware’s.
Worked with different code modules in TestStand Like LabVIEW, .net and C++ ,python
Worked with different NI hardware platforms such as USB DAQ’s, PXI, CDAQ, Basler camera
Worked with various power supplies of different vendors.
Protocol Knowledge: Modbus, RS-232, RS-485, NI- PXI 1078 Chasis, NI-PXI 2510, NI PXI
2512, NI-PXI 6514, NI-PXI 6255
Worked with VI analyzer, NI IO trace tools Unit Test Frame work.
Creating Source code documentation for LabVIEW code
Hands on experience in creating System definition files, custom devices, and Creating
Deterministic Calculated Channels in VeriStand
Experience in Building a User Interface with the VeriStand Workspace
Knowledge on preparing SRS, Design, Handbook, Review Log, Defect log documents.
Knowledge on filling Project Metrics, Billing Timesheets.
Experience in test bench setup & Hands on experience in third party hardware integration
Worked with ACS controller, Stepper, servo motors
Hands-on experience in Manual and Automation Validation for consumer electronics and
semiconductor industries.
Hands on experience in creating User Interface using WPF and application development using C
sharp.
PROGRAMMING SKILLS
• LabVIEW, NI Teststand, Ni Veristand, Veristand Stimulus , Vector CANOE and Diagnostic
tools
• Application Development using state machine, Queued sequence handler’s architecture, DQMH
• Knowledge on LabVIEW Oops, NI Vision for AI and Vision Pro (Cognex)
• Application Development using C Sharp WPF
• ACS controller SPII plus coding
• Vector CANOE, NI Switch Executive, NI Vision Builder AI, DDT2000, NI MAX, and Create
Box for OCR, Microsoft access.
PROFESSIONAL EXPERIENCE:
1. Current Organization Tech Mahindra Hyderabad
Designation: Tech Lead
Duration: From April 2021 to Present
2. Previous Organization: Simplexity PTE Ltd (PBA Groups Singapore).
Designation: Software Engineer
Duration: From April 2019 to April 2021
3. Previous Organization: Renault Nissan Technology & Business Centre India Pvt Ltd.
Chennai, India
Designation: Senior Engineer
Duration: From Jan 2019 to April 2019
4. Previous Organization: EASi, Allegis Group Bangalore, India
Designation: Software Engineer
Duration: From Aug 2015 to Jan 2019
PROJECTS OVERVIEW:
Project Title : Home Appliance Range UI and System Validation
Organization : Tech Mahindra Hyderabad
Role : Tech Lead
Skills used : NI TestStand, NI LabVIEW,
Hardware’s : Customized Load Box, CDAQ 9401,9403,9264
DSUB,VFD,PMVA,LED UI’s
Job Responsibilities :
Responsible for creating automation sequence for validating the System Range, Wall Oven ,Gas
Ovens Etc.
Validation Includes Screen validation, Tone validation, Relay validation for all features.
Responsible for creating Hardware configuration files and model configs
Responsible for setting up hardware setup and perform sanity tests.
Responsible for performing safety checks for each and every release.
Responsible for creating safety test report, overall test request for each release.
Leading Team, assigning work to the team members and monitoring the work progress
Collaborating team to identify and fix technical problems.
Analyzing users' needs and then finding applications to serve them.
Review the test sequences and Test plans of team members.
Troubleshooting, debugging, maintenance & customer support.
Used source tree (GitHub) configuration management tool and Zenhub bug tracking tool
Project : Auto IVI Validation
Organization : Renault Nissan Technology & Business Centre India Pvt Ltd
Role : Senior Engineer
Skills used : NI TestStand, NI LabVIEW, Vector CANOE, NI Switch Executive,
NI Vision Builder AI, DDT2000, NI MAX, Create Box for OCR,
Microsoft Access database, AdvTreeMaker, Report Mngr, HP QC,
TestStand Sequence analyzer
Hardware’s : PXIe-8880, NI PXI Chassis 1085, PXI 6514, PXI 2510, PXI 2534,
PXI 6255, TDK Lambda power, Basler Camera, Web Camera,
Bosch Head Unit. Infotainment Display.
Job Responsibilities:
Developing automated scripts in NI Test Stand for HMI Validation as a part of Infotainment
System Validation
Creating Inspections for Infotainment Validation
Creating Views using Creating box for OCR tool, and storing the coordinates information’s of
labels and buttons in Microsoft Access database
Responsible for planning and estimation of Validation activity.
Validation features of Infotainment using TestStand and LabVIEW.
Report analysis and publishing the reports to HP QC.
Responsible for raising bugs in JIRA for defects found.
Review and debug the code/test scripts developed for infotainment validation.
Project:
Functional and Electrical performance for Left Front Door ECU, left rear Door ECU subsystem
using NI-HIL (PXI) Setup
Organization: EASi, Allegis India Pvt Ltd
Role: Software Engineer
Skills used: NI TestStand (Ver: 2016), NI Veristand (Ver: 2016),
Hardware: PXIe-8821, PXI 6514, PXI 2510, PXI 2534, PXI 6255, TDK Lamda power Supply
Abstract: Validating Left Front Door ECU which controls the LFD, LRD of a car, which consists of
various Switches to control and monitor, once LFD, LFR gets appropriate signals latch starts to operate.
Contribution:
Test cases creation based on requirement specifications
Responsible for doing the bench setup and Wiring connection and Perform
Sanity Test
Creating System definition files, configuring PXI’s using Custom devices.
Creating TestStand, Veristand RT sequences and executing the same.
Analyzing timing diagram
Project: Functional and Electrical performance for LCM subsystem using NI-HIL (PXI) Setup
Organization: EASi, Allegis India Pvt Ltd
Role: Software Engineer
Skills used: NI TestStand (Ver: 2016), NI Veristand (Ver: 2016),
Hardware: PXIe-8821, PXI 6514, PXI 2510, PXI 2534, PXI 6255, TDK Lamda power Supply
Abstract: Validating LCM ECU which controls the deck lid of a car, which consists of various
Switches to control and monitor, once LCM gets appropriate signals from BCM, latch starts to
Operate.
Contribution:
Test cases creation based on requirement specifications
Responsible for doing the bench setup and Wiring connections and Perform Sanity Test
Creating System definition files, configuring PXI’s using Custom devices.
Creating TestStand, Veristand RT sequences
Analyzing timing diagram
Project: Automated test equipment for end of line testing in production environment.
Organization: EASi, Allegis India Pvt Ltd
Position: Software Engineer
Skills utilized: NI LabVIEW (Ver: 2015)
Tools: Report generation tool kit, VISA, Modbus, RS-232, RS-485, barcode scanner.
Project Details: Developing ATE application and Hardware test system for end of line testing in
Production line, application handles series of functionality tests on embedded devices and validate results
obtained to indicate go or no go in the production line with-in couple of seconds and log data into a
repository
Using report generation tool kit.
Project: Kenwood Auto Alignment
Position: Software Developer
Software Used: LabVIEW
Project Details: Kenwood Test and Auto Alignment Software
The Software Performs the Test and Alignment procedures.
Roles and Responsibilities:
• Responsible for Creating device drivers through NI Wizard
• Developing the Test and Alignment Modules
• Developed Auto Alignment Software which tunes the radio and Logging the report in
CSV format.
• Testing code in remote desktop and generating reports for each action sequence using NI
IO trace.
• Prepared SRS, design, Handbook documents
• Defect logging and issue tracking using excel.
• Version Control using tortoise SVN
Project: BK radio Auto Alignment
Position: Software Developer
Skills used: NI LabVIEW (Ver: 2015)
Hardware’s: R8000 Spectrum analyzer, BK (KNG P150, KNG P300, KNG P500, and KNG P800)
radios
Project Details: Designing Test and Alignment Software for BK radio
The Software performs the Test and Alignment procedures
Roles and Responsibility:
Responsible for Creating device drivers through NI Wizard
Developing the Test and Alignment Vis
Created Auto Alignment Software Using test and alignment Vis
Integration and Validation of ATE.
Testing code in remote desktop and generating reports for each action sequence.
Prepared SRS, design, Handbook documents.
Project: Hytera Radio Auto Alignment
Position: Software Developer
Software Used: LabVIEW
Project Details: Designing Auto Alignment Software for Hytera radio
The Software does the Test and Alignment procedures.
Roles and Responsibilities:
• Responsible for Creating device drivers through NI Wizard
• Developing the Test and Alignment libraries
• Developed Auto Alignment Software which tunes the radio and Logging the report in
CSV format
• Integration and testing of ATE
• Testing code in remote desktop and generating reports for each action sequence
• Version Control using tortoise SVN
Project: R8000 Spectrum Analyzer
Position: Software Developer
Skills used: NI LabVIEW (Ver: 2015)
Hardware’s: R8000 Spectrum analyzer,
Project Details: Device driver creation for R8000 Analyzer
Roles and Responsibility:
Responsible for Creating device drivers through TCP IP communication
Created device drivers for R8000 analyzer which measure, sets different parameters of the radios.
Prepared Handbook document
Project: Automated test application for HASS screening of actuators
Organization: EASi
Position: Software Developer
Skills utilized: NI LabVIEW (Ver: 2015)
Tools: NI DAQ (9264, 9205), Report generation tool kit
Project Details: Developed application for HASS screening of a series of actuators where screening
procedure happens at intervals for a prolong time in various conditions using NI DAQ devices, data
obtained will be validated as required and logged into a repository using report generation tool kit.
Roles and Responsibility:
• Developed ATE application
• Testing the software
• Testing the Sub Vis with Unit Test Framework Software creating the report
•
EDUCATION DETAILS:
Pass
S. No Qualification Stream College out Percentage
Shantiram
Engineering College
Nandyal,
1. B.Tech E.C.E JNTUA University 2014 69.30%
2. Intermediate M.P.C Rao’s Junior College 2010 77.2%
School Nandyal
3. S.S.C -- St. John’s 2008 77.33%
School Nandyal
PERSONAL DETAILS
PAN Number : ANDPH171M
Passport Number : S1609136
Language Known : Hindi, English, Telugu
Marital Status : Married
DOB : 28/06/1993
Declaration
I, Shaik Hussain Ali, hereby declare that the above-furnished information is true to the best of my
knowledge.