Professional Documents
Culture Documents
Shutdown SIS
Previous Screen
Product: GAS ENGINE
Model: G3406 GAS ENGINE 4FD
Configuration: G3406 Industrial Engine Natural Gas 4FD00001-UP
a. remove magneto
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp... 2/19/2023
G3406 Industrial Engine Natural Gas 4FD00001-UP(SEBP1772 - 94)/Basic Search Page 2 of 7
Typical Example
2. Remove one bolt and washer (3) holding the wiring harness (4). Move the wiring harness (4) as necessary to do the service work.
3. Remove ten bolts and washers (5) and remove the housing front cover with its gasket.
Typical Example
4. Loosen bolt (7) and belt tightening nut (8). Remove belt (9) from alternator (10).
6. Remove eight nuts and washers (12) and remove the alternator (10) with its mounting bracket and the variable timing cover (13) and its
gasket.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp... 2/19/2023
G3406 Industrial Engine Natural Gas 4FD00001-UP(SEBP1772 - 94)/Basic Search Page 3 of 7
7. Mark the appropriate teeth on the gears for location and timing purposes. Remove one locknut (14) and remove gear (15).
8. Remove four bolts (16) and remove the governor drive group (17).
NOTE: The following steps are for the installation of the governor drive group.
9. Put the governor drive group in position and install four bolts (16).
11. Install variable timing cover (13) and its gasket. Install alternator (10) with its mounting bracket. Install eight nuts and washers (12).
13. Install belt (9) on alternator (10). Tighten belt tightening nut (8) and bolt (7).
14. Install the housing front cover with its gasket with ten bolts and washers (5).
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp... 2/19/2023
G3406 Industrial Engine Natural Gas 4FD00001-UP(SEBP1772 - 94)/Basic Search Page 4 of 7
15. Install wiring harness (4) with one bolt and washer (3).
End By:
a. install magneto
1. Remove the magneto drive shaft assembly (1) from the governor drive housing.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp... 2/19/2023
G3406 Industrial Engine Natural Gas 4FD00001-UP(SEBP1772 - 94)/Basic Search Page 5 of 7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp... 2/19/2023
G3406 Industrial Engine Natural Gas 4FD00001-UP(SEBP1772 - 94)/Basic Search Page 6 of 7
NOTE: The following steps are for the installation of the governor drive group.
14. Install the magneto drive shaft assembly (1) from the governor drive housing.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp... 2/19/2023
G3406 Industrial Engine Natural Gas 4FD00001-UP(SEBP1772 - 94)/Basic Search Page 7 of 7
End By:
Copyright 1993 - 2023 Caterpillar Inc. Sun Feb 19 17:12:55 UTC+0100 2023
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp... 2/19/2023