Professional Documents
Culture Documents
Shutdown SIS
Previous Screen
Product: GAS ENGINE
Model: G3406 GAS ENGINE 4FD
Configuration: G3406 Industrial Engine Natural Gas 4FD00001-UP
Start By:
NOTE: The piston and connecting rod were removed for better photo illustration.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp... 2/19/2023
G3406 Industrial Engine Natural Gas 4FD00001-UP(SEBP1772 - 94)/Basic Search Page 2 of 2
1. Remove bolts (1). Remove piston cooling tubes (2) from the engine. Use tool (A) to turn the crankshaft in a clockwise direction (as seen
from the front of the engine) to get access to all of the piston cooling tubes.
NOTE: The following steps are for the installation of the piston cooling tubes.
2. Check the alignment of the piston cooling tubes with tooling (B). See Use Of 5P8709 Tool Group for Alignment Of Piston Cooling Jets,
Form No. SMHS7267, for the correct alignment procedure.
3. Install piston cooling tubes (2) on the engine. Use tool (A) to turn the crankshaft clockwise (as seen from the front of the engine) to get
access for the installation of the piston cooling tubes.
End By:
Copyright 1993 - 2023 Caterpillar Inc. Sun Feb 19 18:02:45 UTC+0100 2023
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp... 2/19/2023