Professional Documents
Culture Documents
reviewer1@nptel.iitm.ac.in ▼
Unit 2 - Week 1
Course
outline Assignment - 1
The due date for submitting this assignment has passed. Due on 2016-08-06, 23:30 IST.
How to access
the Portal ? Submitted assignment
Week 1 1) A critically damped shock absorber is to be design for a motorcycle of mass 200 kg. When 2 points
the shock absorber is subjected to an initial vertical velocity due to a road bump, the resulting relaxation
Lecture 01 : time is found 2 sec. Find the necessary stiffness of the shock absorber.
Introduction
(a) 50 N/m
Lecture 02 :
Fundamentals (b) 48 N/m
of Linear (c) 52 N/m
Vibrations
(d) 60 N/m
Lecture 03 :
Damped No, the answer is incorrect.
Oscillation and Score: 0
Forced
Accepted Answers:
Oscillation
(a) 50 N/m
Lecture 04 :
Equivalent 2) A piano string is 1.10 m long and has a mass of 9.00 g. How much tension must the string 2 points
Electrical be under if it is to vibrate at a fundamental frequency of 135 Hz?
Circuits for
Oscillation (a) Range of 60 to 65 Newton
Lecture 05 : (b) Range of 66 to 70 Newton
Tutorial I (c) Range of 71 to 75 Newton
Assignment 1 (d) Range of 76 to 80 Newton
Solution
No, the answer is incorrect.
Quiz : Score: 0
Assignment - 1
Accepted Answers:
Week-2: (c) Range of 71 to 75 Newton
3) The human leg has a measured natural frequency of around 20 Hz when in its rigid (knee 2 points
Week 3
locked) position, in the longitudinal direction (i.e., along the length of the bone) assuming no damping.
What will be the maximum displacement of the leg? At t=0 the initial speed u0=0.06 m/s and
Week 4:
displacement x0=0.
https://onlinecourses.nptel.ac.in/noc16_ec12/unit?unit=8&assessment=15 1/4
25/07/2018 Audio System Engineering - - Unit 2 - Week 1
4) Draw the equivalent electrical circuit for the following mechanical 2 points
system and find the mechanical impedance with its corresponding unit, where
Rm=1.4 kg/s, S1=30 N/m, S2=70 N/m and F=2N.
(a)
(b)
https://onlinecourses.nptel.ac.in/noc16_ec12/unit?unit=8&assessment=15 2/4
25/07/2018 Audio System Engineering - - Unit 2 - Week 1
(c)
(d)
5) Consider a mass-spring system described by the equation (1) Give the value(s) of s for 2 points
which the system is critically damped.
Funded by
Powered by
https://onlinecourses.nptel.ac.in/noc16_ec12/unit?unit=8&assessment=15 4/4