Professional Documents
Culture Documents
SURFACE PREPARATION
PRODUCT DESCRIPTION
Surface shall be dry and free from dirt, dust, oil, grease and
Polyvinyl acetate co-polymer matt finish emulsion paint foreign matter. Surface unevenness, cracks etc shall be
made good with our cementitious filler.
USES
APPLICATION DATA
As a decorative and protective finishing coat for internal
walls and ceilings No. of Components : One
No. of Coats : Two
AREA OF APPLICATION Coverage : 0.15 – 0.20 kg/m 2/coat
0.11 – 0.15 ltr/m 2/coat
Suitable primed surfaces of interior concrete, plaster, Dilution : 0 – 20% by weight with water
masonry, gypsum boards, hard and soft boards, asbestos Overcoating Interval :
2 hours
board, etc Method of Application : By brush, roll or spray
:Note: The above technical information/ values are given to the best of our
knowledge based on laboratories tests, and practical experience. However, due
to different applications, site conditions and constraints which are beyond our
control, we are not liable for any circumstances due to or relating to the
application of usage of our products. We reserve the right to alter or modify any
given data without prior notice; therefore it is best to contact us should you
have any doubts or enquires.
PS09/0401/24/01 – 12 March 2004