Professional Documents
Culture Documents
Volid Solid (mix) 40 – 60% Mix the contents of Arkifloor PU thoroughly. Dilute with
SKK Urethane Thinner by 0 - 15%. If an alternative
Shelf Life thinner is used for dilution other than our recommended
Up to 6 mths
(in sealed container) product, we will not be liable for defects or complications
arising from its usage .
Specific Gravity Approx 1.0 – 1.2
APPLICATION
TECHNICAL PROPERTIES Ensure that substrate surface is cleaned prior to
priming. Apply one coat of SK Arkiprimer over the
Odor Low substrate by roller or brush. The area should be primed
with an even coat. Prevention of material ponding is
Thermal Resistance Approx 50°C
recommended. Allow the primer to dry overnight. Lay
Toxicity Physically Safe the Arkifloor PU Clear on the primed substrate with the
aid of a roller or spray. Do not apply Arkifloor PU at
temperature below 10oC.
SURFACE PREPARATION
Concrete Substrate
Concrete surfaces should be well cured and free from
dirt, dust, oil, grease and foreign matters. Any unsound
substrates, cracks, and pot-holes should be made good
with the appropriate SKK filler product.
1/2
ARKIFLOOR PU
Two component, polyurethane based floor coating
Arkifloor PU Coverage
Per Coat 6-8m² / Ltr
PACKING STYLE
MATERIAL HANDLING
2/2