Professional Documents
Culture Documents
SURFACE PREPARATION
PRODUCT DESCRIPTION
Surface shall be dry and free from dirt, dust, oil, grease and
Acrylic latex paint with comprises of acrylic emulsion foreign matters. Existing loose paint film must be removed
pigment filler, additives and water.
APPLICATION DATA
USES
No. of Components : One
As a finishing coat for interior and exterior wall surfaces No. of Coats : Two
and also suitable as a topcoat for multi-layer coatings. Coverage : 0.15 – 0.20 kg/m 2/coat
0.11 – 0.14 ltr/m²/coat
AREA OF APPLICATION Dilution : 0 – 20% with water
Overcoating Interval :
2 hours
Suitable primed surfaces of concrete, plaster, masonry, Method of Application : By brush, roll or spray
brickwork, PC Board, GRC panel, ALC board, gypsum
board, asbestos board, wood, metal etc. PACKING STYLE
:Note: The above technical information/ values are given to the best of
our knowledge based on laboratories tests, and practical experience.
However, due to different applications, site conditions and constraints
which are beyond our control, we are not liable for any circumstances due
to or relating to the application of usage of our products. We reserve the
right to alter or modify any given data without prior notice; therefore it is
best to contact us should you have any doubts or enquires.
PS09/0401/04/01 – 6 March 2004