Professional Documents
Culture Documents
Area of use: Interior, exterior walls, ceilings and partitions etc. Specially intended
for Textures, CASA STONE TEX, and CASA CRAFT TEX type
products.
PHYSICAL CONSTANTS:
Colours/Shade nos: White/10000
Finish: Matt
Volume Solids: 36 %
Theoretical spreading rate: 12 m²/litre - 30 microns*
Flash point: >66°C
Specific gravity: 1.4 kg/litre
Dry to touch: 1 hour (20°C)
*The theoretical spreading rate has been calculated for the stated
volume solids and dry film thickness.
A practical spreading rate will depend on the actual dry film thickness,
the nature of the substrate and the relevant consumption factor.
The physical constants are subject to normal manufacturing
tolerances.
Further reference is made to "Explanatory Notes".
APPLICATION DETAILS:
Application method: Brush/roller
Thinner (max. vol.): Fresh water (0-5%)
Cleaning of tools: Fresh water
Indicated film thickness, dry: 30 microns
Indicated film thickness, wet: 85 microns
Recoat interval, min.: 2 hours (20°C)
Recoat interval, max.: None
Surface condition: The surface should be stable, firm, dry and free from dust, sand, loose
old paint, laitance, dirt, grease and oil. It is recommended to apply the
primer/sealer prior to the application of the specified filler. Touch-up with
a primer/sealer on areas repaired with filler is recommended prior to
application of topcoats.
Remarks: Use only where application and drying can proceed at temperatures
above 5°C, preferably above 10°C and relative humidity is below 75%.
Other sealer/filler types may be specified.
Drying data given is on the assumption that proper ventilation is
provided.
References: Explanation to Product Data Sheet.
Pack sizes: Available in 3.79L and 18L
Shelf Life: 24 months from the month of production.
Storage and Handling: Product must be stored as per local regulations and should be kept in
dry and well ventilated location far from heat and direct sunlight. Cans
should be tightly closed after use. Mix well before use.