Professional Documents
Culture Documents
Pushbuttons
Switches
Pilot lights
Components
Catalogue 1SFC 261001-EN Edition 5 February 2003
Signal Towers K70
Supersedes Catalogue 1SFC 261001-EN Edition 4 December 2000 Signal Beacons KSB
Pushbuttons, selector switches,
toggle switches and pilot lights
✔ Terminals protected against inadvertant touching. (IP20)
A complete range of state-of
✔ The contact blocks are colour coded for ease of wiring and
the art products inspection (NO is green, NC is red). The contacts have
silver tips and are self-cleaning to ensure good conductivity
ABB Control has a complete range of pushbuttons,
even after long use.
selector switches and pilot lights of modern design that
are easy to install. ✔ The lamp blocks can take either filament bulb, neon bulb,
By combining a few basic components a large number of buzzer or LED. The bulbs can be changed from the front.
versions can be built up. They can be ordered in parts
(operator + blocks with holder) or installed in an enclosure. ✔ Non-metallic or aluminium enclosures for rear mounting.
Front mounting is available.
✔ Lenses and lamp caps have a large area, giving dependable ✔ A wide assortment of accessories including legend plates,
operation. Pushbuttons and pilot lights are easy to tell bulbs, special blocks and enclosures are available.
apart.
✔ The design complies with all major international standards.
✔ Pushbuttons, selector switches and toggle switches are
available with three different bezels: black plastic, chrome
plastic or metal.
✔ The terminals on the contact blocks and lamp blocks are
open. Wiring can be done separately before the blocks are
snapped on the operator and holder or to the enclosure
base.
✔ Pushbuttons, pilot lights and selector switches have an inte-
grated spring-loaded tab. Used together with a notched
hole it willl prevent the operator from rotating.
Legend plates
Of plastic or aluminium with
slots that guide the legend
plate and the operator into
the correct position.
Contact block
Single pole with making or
Operator breaking contact.
Lenses and handles in
several colours. Sleeve and Lamp block
Illuminated or tightening nut Illuminated pushbuttons, selector switches and
non-illuminated. The sleeve has pilot lights have a lamp block in the centre
bayonet fit. position of the holder.
Holder
Available either for three blocks or five blocks
in one single row. Additional blocks can be
stacked.
Bezels
Pushbuttons, selector switches and toggle switches
with bezel in black plastic, chrome plastic or metal
are available.
Easy to install
The only tool needed is a screwdriver for connecting the wiring.
1. The operator is to be inserted from the front and secured at the 2. The holder is pushed onto the sleeve and secured with a latch.
back with a bayonet type sleeve and locking ring. The contact block/lamp blocks are then snapped on.
2 ABB
1SFC 261001-EN, Ed. 5
ABB 67
1SFC 261001-EN, Ed. 5
ABB Automation Technology Products AB/Control, SE-721 61 Västerås, Sweden, Telephone +46 21 32 07 00, Telefax +46 21 12 60 01
Catalogue 1SFC 261001-EN, Edition 5 February 2003 ABB Automation Technology Products ABControl/XM Printed in February 2003/Edita Västra
Aros
Contents
Pilot devices Non-illuminated Illuminated
page page
Pushbuttons, type KP 6 7
Potentiometers, type KT 15
Selector switches,
type K2SS, K3SS 16 – 17 18–19
Buzzers, type KB 22
Reset buttons 27
Accessories Blocks 35
Bulbs and LEDs 36-37
Legend plates 39
4 ABB
1SFC 261001-EN, Ed. 5
Selection Guide
Hole panel
adaptor 1.5 – 4 mm
panel
1.5 – 6 mm
For For Not together with Not together
flush extended legend plate with legend
button button holder plate holder
Accessories Transformers
Sealing membrane
Accessories
Legend plates
Accessories
Legend plates Shackle
rg e n c
me
E
Not together
with
legend plate.
Stop For 30 mm knob with twist
release only.
Components Accessories
Reset buttons Potentiometers Buzzers Legend plates
Accessories
Legend plates Text cap
ABB 5
1SFC 261001-EN, Ed. 5
Note: Both operator and
contact block(s) must be
Pushbuttons, non-illuminated
ordered to get a complete
pilot device Black plastic bezel
Weight
Type Order Code kg
Maintained 1)
Button colour: Red KP2-10R 1SFA 616 101 R1001 0.016
Green KP2-10G 1SFA 616 101 R1002 0.016
Yellow KP2-10Y 1SFA 616 101 R1003 0.016
Blue KP2-10L 1SFA 616 101 R1004 0.016
White KP2-10W 1SFA 616 101 R1005 0.016
Black KP2-10B 1SFA 616 101 R1006 0.016
Replace 1 in the: Button colour: Red KP4-10R 1SFA 616 103 R1001 0.016
Type KPX-1 0X Green KP4-10G 1SFA 616 103 R1002 0.016
Cat. No. 1SFA 616 XXX R 1 XXX Yellow KP4-10Y 1SFA 616 103 R1003 0.016
2 for chrome plastic bezel Blue KP4-10L 1SFA 616 103 R1004 0.016
White KP4-10W 1SFA 616 103 R1005 0.016
3 for metal bezel
Black KP4-10B 1SFA 616 103 R1006 0.016
Weight
Blocks Type Order Code kg
1)
No contact block in the centre Accessories, see p. 35.
position. Dimension drawings, see p. 56.
3)
Pushbuttons with text/symbol on
request.
6 ABB
1SFC 261001-EN, Ed. 5
Note: Both operator and
contact block(s) /lamp block
Pushbuttons, illuminated
must be ordered to get
a complete pilot device Black plastic bezel
Weight
Type Order Code kg
Maintained 1)
Button colour: Red KP2-11R 1SFA 616 101 R1101 0.016
Green KP2-11G 1SFA 616 101 R1102 0.016
Yellow KP2-11Y 1SFA 616 101 R1103 0.016
Blue KP2-11L 1SFA 616 101 R1104 0.016
White KP2-11W 1SFA 616 101 R1105 0.016
Clear KP2-11C 1SFA 616 101 R1108 0.016
Maintained 1)
Button colour: Red K P4-11R 1SFA 616 103 R1101 0.016
Bezel in chrome plastic or metal Green K P4-11G 1SFA 616 103 R1102 0.016
Replace 1 in the: Yellow K P4-11Y 1SFA 616 103 R1103 0.016
Type KPX-1 0X Blue K P4-11L 1SFA 616 103 R1104 0.016
Cat. No. 1SFA 616 XXX R 1 XXX White K P4-11W 1SFA 616 103 R1105 0.016
2 for chrome plastic bezel Clear K P4-11C 1SFA 616 103 R1108 0.016
Weight
Blocks Type Order Code kg
3)
1)
No contact block in the centre Pushbuttons with text/symbol Accessories, see p. 35.
position. on request. Dimension drawings, see p. 56.
2)
Lamp block for max. 230 V AC/
DC. Bulb not included.
For other lamp blocks see p 35.
ABB 7
1SFC 261001-EN, Ed. 5
Note: Both operator and
contact block(s) must be
Double pushbuttons, non-illuminated
ordered to get a complete
pilot device
White no text Black no text KPD5-11B 1SFA 616 134 R1106 0.025
I O KPD6-11B 1SFA 616 135 R1106 0.025
ON OFF KPD7-11B 1SFA 616 136 R1106 0.025
Lens colour
= black START STOP KPD8-11B 1SFA 616 137 R1106 0.025
White no text Black no text KPD16-11B 1SFA 616 145 R1106 0.025
Lens colour I O KPD17-11B 1SFA 616 146 R1106 0.025
= black ON OFF KPD18-11B 1SFA 616 147 R1106 0.025
START STOP KPD19-11B 1SFA 616 148 R1106 0.025
Weight
Blocks Type Order Code kg
1)
No contact block in the centre Accessories, see p. 35.
position. Dimension drawings, see p. 56.
8 ABB
1SFC 261001-EN, Ed. 5
Note: Both operator and
contact block(s) /lamp block
Double pushbuttons, illuminated
must be ordered to get
a complete pilot device
White no text Black no text KPD5-11R 1SFA 616 134 R1101 0.025
Lens colours
I O KPD6-11R 1SFA 616 135 R1101 0.025
- red
ON OFF KPD7-11R 1SFA 616 136 R1101 0.025
- green
START STOP KPD8-11R 1SFA 616 137 R1101 0.025
- yellow
- clear
Green lens
Green no text Red no text KPD1-11G 1SFA 616 130 R1102 0.025
I O KPD2-11G 1SFA 616 131 R1102 0.025
ON OFF KPD3-11G 1SFA 616 132 R1102 0.025
START STOP KPD4-11G 1SFA 616 133 R1102 0.025
White no text Black no text KPD5-11G 1SFA 616 134 R1102 0.025
I O KPD6-11G 1SFA 616 135 R1102 0.025
ON OFF KPD7-11G 1SFA 616 136 R1102 0.025
START STOP KPD8-11G 1SFA 616 137 R1102 0.025
Yellow lens
Green no text Red no text KPD1-11Y 1SFA 616 130 R1103 0.025
I O KPD2-11Y 1SFA 616 131 R1103 0.025
ON OFF KPD3-11Y 1SFA 616 132 R1103 0.025
START STOP KPD4-11Y 1SFA 616 133 R1103 0.025
White no text Black no text KPD5-11Y 1SFA 616 134 R1103 0.025
I O KPD6-11Y 1SFA 616 135 R1103 0.025
ON OFF KPD7-11Y 1SFA 616 136 R1103 0.025
START STOP KPD8-11Y 1SFA 616 137 R1103 0.025
Clear lens
Green no text Red no text KPD1-11C 1SFA 616 130 R1108 0.025
I O KPD2-11C 1SFA 616 131 R1108 0.025
ON OFF KPD3-11C 1SFA 616 132 R1108 0.025
START STOP KPD4-11C 1SFA 616 133 R1108 0.025
White no text Black no text KPD5-11C 1SFA 616 134 R1108 0.025
I O KPD6-11C 1SFA 616 135 R1108 0.025
ON OFF KPD7-11C 1SFA 616 136 R1108 0.025
START STOP KPD8-11C 1SFA 616 137 R1108 0.025
Weight
Blocks Type Order Code kg
1) 2)
No contact block in the centre Lamp block for max. 230 V AC/ Accessories, see p. 35.
position. DC. Bulb not included. Dimension drawings, see p. 56.
For other lamp blocks see p 35.
ABB 9
1SFC 261001-EN, Ed. 5
Note: Both operator and
contact block(s) /lamp block
Double pushbuttons, illuminated
must be ordered to get
a complete pilot device
White no text Black no text KPD16-11R 1SFA 616 145 R1101 0.025
Lens colours I O KPD17-11R 1SFA 616 146 R1101 0.025
- red ON OFF KPD18-11R 1SFA 616 147 R1101 0.025
- green START STOP KPD19-11R 1SFA 616 148 R1101 0.025
- yellow
- clear
Green lens
Green no text Red no text KPD12-11G 1SFA 616 141 R1102 0.025
I O KPD13-11G 1SFA 616 142 R1102 0.025
ON OFF KPD14-11G 1SFA 616 143 R1102 0.025
START STOP KPD15-11G 1SFA 616 144 R1102 0.025
White no text Black no text KPD16-11G 1SFA 616 145 R1102 0.025
I O KPD17-11G 1SFA 616 146 R1102 0.025
ON OFF KPD18-11G 1SFA 616 147 R1102 0.025
START STOP KPD19-11G 1SFA 616 148 R1102 0.025
Yellow lens
Green no text Red no text KPD12-11Y 1SFA 616 141 R1103 0.025
I O KPD13-11Y 1SFA 616 142 R1103 0.025
ON OFF KPD14-11Y 1SFA 616 143 R1103 0.025
START STOP KPD15-11Y 1SFA 616 144 R1103 0.025
White no text Black no text KPD16-11Y 1SFA 616 145 R1103 0.025
I O KPD17-11Y 1SFA 616 146 R1103 0.025
ON OFF KPD18-11Y 1SFA 616 147 R1103 0.025
START STOP KPD19-11Y 1SFA 616 148 R1103 0.025
Clear lens
Green no text Red no text KPD12-11C 1SFA 616 141 R1108 0.025
I O KPD13-11C 1SFA 616 142 R1108 0.025
ON OFF KPD14-11C 1SFA 616 143 R1108 0.025
START STOP KPD15-11C 1SFA 616 144 R1108 0.025
White no text Black no text KPD16-11C 1SFA 616 145 R1108 0.025
I O KPD17-11C 1SFA 616 146 R1108 0.025
ON OFF KPD18-11C 1SFA 616 147 R1108 0.025
START STOP KPD19-11C 1SFA 616 148 R1108 0.025
Weight
Blocks Type Order Code kg
2)
1)
No contact block in the centre Lamp block for max. 230 V AC/ Accessories, see p. 35.
position. DC. Bulb not included. Dimension drawings, see p. 56.
For other lamp blocks see p 35.
10 ABB
1SFC 261001-EN, Ed. 5
Note: Both operator and
contact block(s) must be
Key-lockable pushbuttons
ordered to get a complete
pilot device
Weight
Type Order Code kg
Maintained
Locks, when depressed, can only be released with the key
Key removable in both locked and unlocked position
Ronis 455 (Key code 71) KPK1-101 1SFA 616 110 R1001 0.059
Ronis 421 (Key code 72) KPK1-102 1SFA 616 110 R1002 0.059
Ronis 3433-E (Key code 73) KPK1-103 1SFA 616 110 R1003 0.059
Momentary
Can be operated without key when unlocked
Key removable in both locked and unlocked position
Key-lockable in non-depressed position
Ronis 455 (Key code 71) KPK2-101 1SFA 616 111 R1001 0.059
Ronis 421 (Key code 72) KPK2-102 1SFA 616 111 R1002 0.059
Ronis 3433-E (Key code 73) KPK2-103 1SFA 616 111 R1003 0.059
Key-lockable in depressed position
Ronis 455 (Key code 71) KPK3-101 1SFA 616 112 R1001 0.059
Ronis 421 (Key code 72) KPK3-102 1SFA 616 112 R1002 0.059
Ronis 3433-E (Key code 73) KPK3-103 1SFA 616 112 R1003 0.059
Bezel in chrome plastic or metal Key-lockable in both non-depressed and depressed position
Replace 1 in the: Ronis 455 (Key code 71) KPK4-101 1SFA 616 113 R1001 0.059
Type KPKX-1 0X Ronis 421 (Key code 72) KPK4-102 1SFA 616 113 R1002 0.059
Cat. No. 1SFA 616 XXX R 1 XXX Ronis 3433-E (Key code 73) KPK4-103 1SFA 616 113 R1003 0.059
2 for chrome plastic bezel
Weight
Blocks Type Order Code kg
ABB 11
1SFC 261001-EN, Ed. 5
Note: Both operator and
contact block(s) /lamp block
Mushroom pushbuttons, momentary
must be ordered to get
a complete pilot device
Non-illuminated and illuminated
Non-illuminated operators
Ø 40 mm
Plastic Red KPM1-10R 1SFA 616 124 R1001 0.039
Yellow KPM1-10Y 1SFA 616 124 R1003 0.039
Black KPM1-10B 1SFA 616 124 R1006 0.039
Ø 60 mm
Plastic Red KPM2-10R 1SFA 616 125 R1001 0.039
Yellow KPM2-10Y 1SFA 616 125 R1003 0.039
Black KPM2-10B 1SFA 616 125 R1006 0.039
Illuminated operators 1)
Ø 40 mm
Plastic Red KPM1-11R 1SFA 616 124 R1101 0.039
Yellow KPM1-11Y 1SFA 616 124 R1103 0.039
Ø 60 mm
Plastic Red KPM2-11R 1SFA 616 125 R1101 0.039
Yellow KPM2-11Y 1SFA 616 125 R1103 0.039
Weight
Blocks Type Order Code kg
1) 2)
No contact block in the centre Lamp block for max. 230 V AC/ Accessories, see p. 35.
position. DC. Bulb not included. Dimension drawings, see p. 56.
For other lamp blocks see p 29.
12 ABB
1SFC 261001-EN, Ed. 5
Note: Both operator and
contact block(s) must be
Mushroom pushbuttons
ordered to get a complete
pilot device
Maintained.
Non-illuminated operators
Operator Ø 30 mm
Twist release
Plastic Red KPMT1-10R 1SFA 616 500 R1001 0.039
Pull release
Plastic Red KPMP1-10R 1SFA 616 501 R1001 0.039
Operator Ø 40 mm
Key release (key code 71, Ronis 455)
Plastic Red KPMK2-10R 1SFA 616 504 R1001 0.079
The mushroom pushbutton with Key release (key code 72, Ronis 421)
key release is delivered with two Plastic Red KPMP5-10R 1SFA 616 507 R1001 0.079
keys.
Weight
Blocks Type Order Code kg
ABB 13
1SFC 261001-EN, Ed. 5
Note: Both operator and
contact block(s) /lamp block
Emergency stop pushbuttons
must be ordered to get
a complete pilot device Non-illuminated and illuminated
Non-illuminated operators
Ø 40 mm
Twist release Plastic, red KPMT3-10R 1SFA 616 510 R1001 0.041
Pull release Plastic, red KPMP3-10R 1SFA 616 511 R1001 0.041
Ø 60 mm
Twist release Plastic, red KPMT4-10R 1SFA 616 513 R1001 0.048
Pull release Plastic, red KPMP4-10R 1SFA 616 514 R1001 0.048
Illuminated operators
Ø 40 mm
Twist release Plastic, red KPMT3-11R 1SFA 616 510 R1101 0.041
Pull release Plastic, red KPMP3-11R 1SFA 616 511 R1101 0.041
Ø 60 mm
Twist release Plastic, red KPMT4-11R 1SFA 616 513 R1101 0.048
Pull release Plastic, red KPMP4-11R 1SFA 616 514 R1101 0.048
● Use adapter plate 1SFA 616 920 R 8014 (see page 29) when using
non-metallic enclosure.
● The safety holder below can only be used for the the above
mentioned type of Emergency stop pushbuttons.
Weight
Blocks Type Order Code kg
1)
No contact block in the centre 2)
Lamp block for max. 230 V AC/ Accessories, see p. 35.
position for the illuminated DC. Bulb not included. Dimension drawings, see p. 56.
operators. For other lamp blocks see p 35.
14 ABB
1SFC 261001-EN, Ed. 5
Potentiometer
Weight
Bezel Type Order Code kg
Resistor data
Element type Cermet Operating knob - without resistor
Power rating 2W Black knob with integrated position indication and marking in white.
Mechanical angle 280° For shaft diameter 6 - 6.35 mm. Min. shaft length 20 mm.
Terminals Solder lugs
Black plastic KT-1B 1SFA 616 410 R1006 0.023
Insulation voltage 900 V
Chrome plastic KT-2B 1SFA 616 410 R2006 0.023
Operating Metal KT-3B 1SFA 616 410 R3006 0.031
temperature -1°C to + 70°C
Suitable legend plates - see page 45.
ABB 15
1SFC 261001-EN, Ed. 5
Note: Both operator and
contact block(s) must be
Two-position selector switches, non-illuminated
ordered to get a complete
pilot device Black plastic bezel
Weight
Symbol Handle colour Type Order Code kg
Maintained
Red K2SS2-10R 1SFA 616 201 R1001 0.024
Black K2SS2-10B 1SFA 616 201 R1006 0.024
Grey K2SS2-10U 1SFA 616 201 R1007 0.024
Maintained
Red K2SS5-10R 1SFA 616 204 R1001 0.025
Black K2SS5-10B 1SFA 616 204 R1006 0.025
Bezel in chrome plastic or Grey K2SS5-10U 1SFA 616 204 R1007 0.025
metal
Replace 1 in the:
Type K2SSX-1 0X Momentary, spring return from C to B
Cat. No. 1SFA 616 XXX R 1 XXX Red K2SS6-10R 1SFA 616 205 R1001 0.025
2 for chrome plastic bezel Black K2SS6-10B 1SFA 616 205 R1006 0.025
Grey K2SS6-10U 1SFA 616 205 R1007 0.025
3 for metal bezel
Weight
Blocks Type Order Code kg
1)
Contact functions No contact block in the centre Accessories, see p. 35.
Block positions as seen from position. Dimension drawings, see p. 56.
operator front.
Handle Left Right
position block block
A (B) O O
O x x
O = not influenced (normal state)
x = influenced (state changed)
16 ABB
1SFC 261001-EN, Ed. 5
Note: Both operator and
contact block(s) must be
Three-position selector switches, non-illuminated
ordered to get a complete
pilot device Black plastic bezel
Weight
Symbol Handle colour Type Order Code kg
1)
Contact functions No contact block in the centre Accessories, see p. 35.
Block positions as seen from position. Dimension drawings, see p. 56.
operator front.
Handle Left Right
position block block
A x O
B O O
C O x
O = not influenced (normal state)
x = influenced (state changed)
ABB 17
1SFC 261001-EN, Ed. 5
Note: Both operator and
contact block(s) /lamp block
Two-position selector switches, illuminated
must be ordered to get
a complete pilot device
Black plastic bezel
Weight
Symbol Handle colour Type Order Code kg
Contact functions 1)
No contact block in the centre
2)
Lamp block for max. 230 V AC/ Accessories, see p. 35.
Block positions as seen from position. DC. Dimension drawings, see p. 56.
operator front. Bulb not included.
Handle Left Right For other lamp blocks see p. 35
position block block
A (B) O O
O x x
O = not influenced (normal state)
x = influenced (state changed)
18 ABB
1SFC 261001-EN, Ed. 5
Note: Both operator and
contact block(s) /lamp block
Three-position selector switches, illuminated
must be ordered to get
a complete pilot device Black plastic bezel
Weight
Symbol Handle colour Type Order Code kg
ABB 19
1SFC 261001-EN, Ed. 5
Note: Both operator and
contact block(s) must be
Key-operated selector switches
ordered to get a complete
pilot device
Maintained
In position B only K2SSK2-10■ 1) 1SFA 616 281 R100 ■ 1) 0.069
The key-operated selector
switches are delivered with two
keys. Momentary, spring return from C to B
In position B only K2SSK3-10■ 1) 1SFA 616 282 R100 ■ 1) 0.069
Maintained
In position B only K3SSK2-10■ 1) 1SFA 616 284 R100 ■ 1) 0.069
1
) Key code codes
Momentary, spring return from A to B and C to B
Key code Code In position B only K3SSK3-10■ 1) 1SFA 616 285 R100 ■ 1) 0.069
71 (standard) ■=1
72 ■=2
73 ■=3
Other On request
Momentary, spring return from C to B
In position A only K3SSK4-10■ 2) 1SFA 616 286 R100 ■ 2) 0.069
2
) Key code codes
Key code Code
71 (standard) ■=1 Momentary, spring return from C to B
72 ■=2
In all positions K3SSK5-10■ 1) 1SFA 616 287 R100 ■ 1) 0.069
Weight
Blocks Type Order Code kg
4)
Contact functions 3)
No contact block in the centre To improve antirotation use Accessories, see p. 35.
Two positions: see page 18 position. guide washer 2154 373-2. Dimension drawings, see p. 56.
See page 38.
Three positions: see page 19
20 ABB
1SFC 261001-EN, Ed. 5
Note: Both operator and
contact block(s) must be
Toggle switches
ordered to get a complete
pilot device
Weight
Symbol Bezel Type Order Code kg
Maintained 2)
Black plastic KTS3-10B 1SFA 616 302 R1006 0.021
Chrome plastic KTS3-20B 1SFA 616 302 R2006 0.021
Metal KTS3-30B 1SFA 616 302 R3006 0.021
Weight
Blocks Type Cat.No. kg
1)
Contact functions No contact block in centre
Block positions as seen from position.
operator front. 2)
Contact block in centre position
Two-position switch Three-position momentary switch Three-position maintained switch is influenced in both position A
Handle Left Right Handle Left Right Handle Left Middle Right and C.
position block block position block block position block block block
A O O A x O A O x x Accessories, see p. 35.
Dimension drawings, see p. 56.
C x x B O O B O O O
O = not influenced (normal state) C O x C x x O
x = influenced (state changed) O = not influenced (normal state)
O = not influenced (normal state)
x = influenced (state changed) x = influenced (state changed)
ABB 21
1SFC 261001-EN, Ed. 5
Note: Both pilot light head
and lamp block must be
Pilot lights and buzzers
ordered to get a complete
pilot light
Lens Weight,
colour Type Order Code kg
Weight,
Supply voltage Type Order Code kg
Lens Weight,
colour Type Order Code kg
Weight,
Type Order Code kg
Weight,
Supply voltage Tone type Type Order Code kg
Buzzers
Black. Frequency: Approx. 2400 Hz. Loudness: Min 80 dB(A)/10 cm,
Rated current:≤8 mA. Service life >5000 h
24 V AC/DC Continuous KB1-4010 1SFA 616 401 R4010 0.020
115 V AC/DC Continuous KB1-4030 1SFA 616 401 R4030 0.020
230 V AC Continuous KB1-4040 1SFA 616 401 R4040 0.020
24 V AC/DC Pulsating KB1-4110 1SFA 616 401 R4110 0.020
115 V AC/DC Pulsating KB1-4130 1SFA 616 401 R4130 0.020
230 V AC Pulsating KB1-4140 1SFA 616 401 R4140 0.020
1)
Bulb not included. Accessories, see p. 29
Dimension drawings, see p. 56-57
22 ABB
1SFC 261001-EN, Ed. 5
Signal Towers K70 and Signal Beacons KSB
3 4
1 5
ASI (+) 0
ASI (-)
ABB 23
1SFC 261001-EN, Ed. 5
Signal Towers K70
Weight,
Colour Type Order Code kg
Optical modules
Light element
Permanent light, 12-240 V AC/DC. For bulb BA15d. Bulb not included.
Red KL70-401R 1SFA 616 070 R4011 0.09
Green KL70-401G 1SFA 616 070 R4012 0.09
Yellow KL70-401Y 1SFA 616 070 R4013 0.09
Blue KL70-401L 1SFA 616 070 R4014 0.09
Clear KL70-401C 1SFA 616 070 R4018 0.09
Blinking light, 24 V AC/DC. For bulb BA15d. Bulb not included.
Red KL70-302R 1SFA 616 070 R3021 0.10
Green KL70-302G 1SFA 616 070 R3022 0.10
Yellow KL70-302Y 1SFA 616 070 R3023 0.10
Blue KL70-302L 1SFA 616 070 R3024 0.10
Clear KL70-302C 1SFA 616 070 R3028 0.10
Flashing light, 24 V DC. Xenon tube included. Not changeable.
Red KL70-203R 1SFA 616 070 R2031 0.12
Green KL70-203G 1SFA 616 070 R2032 0.12
Yellow KL70-203Y 1SFA 616 070 R2033 0.12
Blue KL70-203L 1SFA 616 070 R2034 0.12
Clear KL70-203C 1SFA 616 070 R2038 0.12
Blinking light, 115 V AC/DC. For bulb BA15d. Bulb not included.
Red KL70-312R 1SFA 616 070 R3121 0.10
Green KL70-312G 1SFA 616 070 R3122 0.10
Yellow KL70-312Y 1SFA 616 070 R3123 0.10
Blue KL70-312L 1SFA 616 070 R3124 0.10
Clear KL70-312C 1SFA 616 070 R3128 0.10
Flashing light, 115 V AC. Xenon tube included. Not changeable.
Red KL70-113R 1SFA 616 070 R1131 0.11
Green KL70-113G 1SFA 616 070 R1132 0.11
Yellow KL70-113Y 1SFA 616 070 R1133 0.11
Blue KL70-113L 1SFA 616 070 R1134 0.11
Clear KL70-113C 1SFA 616 070 R1138 0.11
Blinking light, 230 V AC/DC. For bulb BA15d. Bulb not included.
Red KL70-322R 1SFA 616 070 R3221 0.10
Green KL70-322G 1SFA 616 070 R3222 0.10
Yellow KL70-322Y 1SFA 616 070 R3223 0.10
Blue KL70-322L 1SFA 616 070 R3224 0.10
Clear KL70-322C 1SFA 616 070 R3228 0.10
Flashing light, 230 V AC. Xenon tube included. Not changeable.
Red KL70-123R 1SFA 616 070 R1231 0.11
Green KL70-123G 1SFA 616 070 R1232 0.11
Yellow KL70-123Y 1SFA 616 070 R1233 0.11
Blue KL70-123L 1SFA 616 070 R1234 0.11
Clear KL70-123C 1SFA 616 070 R1238 0.11
LED Permanent light, 24 V AC/DC. LED included. Not changeable.
Red KL70-305R 1SFA 616 070 R3051 0.10
Green KL70-305G 1SFA 616 070 R3052 0.10
Yellow KL70-305Y 1SFA 616 070 R3053 0.10
Blue KL70-305L 1SFA 616 070 R3054 0.10
White KL70-305C 1SFA 616 070 R3058 0.10
LED Blinking light, 24 V AC/DC. LED included. Not changeable.
Red KL70-306R 1SFA 616 070 R3061 0.10
Green KL70-306G 1SFA 616 070 R3062 0.10
Yellow KL70-306Y 1SFA 616 070 R3063 0.10
Blue KL70-305L 1SFA 616 070 R3064 0.10
White KL70-305C 1SFA 616 070 R3068 0.10
LED Rotating light, 24 V AC/DC. LED included. Not changeable.
Red KL70-307R 1SFA 616 070 R3071 0.10
Green KL70-307G 1SFA 616 070 R3072 0.10
Yellow KL70-307Y 1SFA 616 070 R3073 0.10
Blue KL70-305L 1SFA 616 070 R3074 0.10
White KL70-305C 1SFA 616 070 R3078 0.10
24 ABB
1SFC 261001-EN, Ed. 5
Signal Towers K70
Accessories
Weight,
Description Type Order Code kg
Bulbs for Signal Tower K70 Bulb Ba15d, 42 mm, Max 7 W For permanent or blinking light.
:24 V, 5 W, AC/DC 1SFA 616 923 R1028 0.009
115 V, 5 W, AC/DC 1SFA 616 923 R1118 0.009
230 V, 5 W, AC/DC 1SFA 616 923 R1148 0.009
LED bulbs for Signal Tower K70 Ba 15d. For 24 V AC/DC, 40 mA
Colour: Red KA4-1021 1SFA 616 924 R1021 0.009
Green KA4-1022 1SFA 616 924 R1022 0.009
Yellow KA4-1023 1SFA 616 924 R1023 0.009
Blue KA4-1024 1SFA 616 924 R1024 0.009
White KA4-1025 1SFA 616 924 R1025 0.009
Audible modules
Buzzer element
85 dB, continuous or pulsating tone, adjustable
24 V AC/DC KB70-3001 1SFA 616 071 R3001 0.11
115 V AC/DC KB70-3101 1SFA 616 071 R3101 0.11
230 V AC KB70-1201 1SFA 616 071 R1201 0.12
Siren element
Multi function, 8 diff. tones adjustable, volume adjustable
100 dB, 115 V AC KS70-1104 1SFA 616 073 R1104 0.13
Multi function, 8 diff. tones adjustable, volume adjustable
100 dB, 230 V AC KS70-1204 1SFA 616 073 R1204 0.12
Multi function, 7 diff. tones adjustable, volume adjustable, remote control
100 dB, 24 V DC KS70-2004 1SFA 616 073 R2004 0.12
Multi function, 8 diff. tones adjustable, volume adjustable
100 dB, 24 V AC/DC KS70-3004 1SFA 616 073 R3004 0.12
Continuous tone alternating
108 dB, 24 V DC KS70-2002 1SFA 616 073 R2002 0.15
AS-Interface Module
18,5-31,6 V AC/DC KASI-4101 1SFA 616 079 R4101 0.11
for external voltage
(KT70)
18,5-31,6 V AC/DC KASI-4102 1SFA 616 079 R4102 0.14
max 5
elements { KB70/K S70
KASI
Terminal elements
For tube mounting,
KL70 including cap KT70-1001 1SFA 616 075 R1001 0.15
KT70-1002
For bracket or base,
including cap KT70-1002 1SFA 616 075 R1002 0.15
KT70-1001
Special parts
KA70-1034 Contact box
Cable exit at side KA70-1001 1SFA 616 077 R1001 0.07
KA70-1001
Magnetic base KA70-1002 1SFA 616 077 R1002 0.31
KA70-1022
KA70-1031
Base with tube
KA70-1021
ABB 25
1SFC 261001-EN, Ed. 5
Signal Beacons KSB
Weight,
Colour Type Order Code kg
Signal Beacons
Permanent light, 12-240 V AC/DC. For bulb BA15d. Bulb not included.
Red KSB-401R 1SFA 616 080 R4011 0.13
Green KSB-401G 1SFA 616 080 R4012 0.13
Yellow KSB-401Y 1SFA 616 080 R4013 0.13
Blue KSB-401L 1SFA 616 080 R4014 0.13
Clear KSB-401C 1SFA 616 080 R4018 0.13
Flashing light, 24 V DC. Xenon tube included. Not changeable.
Red KSB-203R 1SFA 616 080 R2031 0.14
Green KSB-203G 1SFA 616 080 R2032 0.14
Yellow KSB-203Y 1SFA 616 080 R2033 0.14
Blue KSB-203L 1SFA 616 080 R2034 0.14
Clear KSB-203C 1SFA 616 080 R2038 0.14
Flashing light, 115 V AC. Xenon tube included. Not changeable.
Red KSB-113R 1SFA 616 080 R1131 0.14
Green KSB-113G 1SFA 616 080 R1132 0.14
Yellow KSB-113Y 1SFA 616 080 R1133 0.14
Blue KSB-113L 1SFA 616 080 R1134 0.14
Clear KSB-113C 1SFA 616 080 R1138 0.14
Flashing light, 230 V AC. Xenon tube included. Not changeable.
Red KSB-123R 1SFA 616 080 R1231 0.14
Green KSB-123G 1SFA 616 080 R1232 0.14
Yellow KSB-123Y 1SFA 616 080 R1233 0.14
Blue KSB-123L 1SFA 616 080 R1234 0.14
Clear KSB-123C 1SFA 616 080 R1238 0.14
LED Permanent light, 24 V AC/DC. LED included. Not changeable.
Red KSB-305R 1SFA 616 080 R3051 0.14
Green KSB-305G 1SFA 616 080 R3052 0.14
Yellow KSB-305Y 1SFA 616 080 R3053 0.14
LED Blinking light, 24 V AC/DC. LED included. Not changeable.
Red K SB-306R 1SFA 616 080 R3061 0.14
Green K SB-306G 1SFA 616 080 R3062 0.14
Yellow K SB-306Y 1SFA 616 080 R3063 0.14
LED Rotating light, 24 V AC/DC. LED included. Not changeable.
Red KSB-307R 1SFA 616 080 R3071 0.14
Green KSB-307G 1SFA 616 080 R3072 0.14
Yellow KSB-307Y 1SFA 616 080 R3073 0.14
Special parts
Anti-twist device KASB-1000 1SFA 616 087 R1000
26 ABB
1SFC 261001-EN, Ed. 5
Reset pushbuttons
Lens Weight,
Colour Text Type Order Code kg
Without shaft
With flush button
Red No text KPR1-100R 1SFA 616 160 R1001 0.020
Green No text KPR1-100G 1SFA 616 160 R1002 0.020
II KPR1-103G 1SFA 616 160 R1032 0.020
Yellow No text KPR1-100Y 1SFA 616 160 R1003 0.020
Blue No text KPR1-100L 1SFA 616 160 R1004 0.020
R KPR1-101L 1SFA 616 160 R1014 0.020
White No text KPR1-100W 1SFA 616 160 R1005 0.020
R KPR1-101W 1SFA 616 160 R1015 0.020
I KPR1-102W 1SFA 616 160 R1025 0.020
II KPR1-103W 1SFA 616 160 R1035 0.020
Black No text KPR1-100B 1SFA 616 160 R1006 0.020
RESET KPR1-104B 1SFA 616 160 R1046 0.020
Accessories
In application with a long shaft a flexible joint can be used
to avoid damages caused by incautious handling of the shaft.
Shaft including fixing nut KA1-8046 1SFA 616 920 R8046 10 0.070
Flexible joint KA1-8047 1SFA 616 920 R8047 10 0.051
ABB 27
1SFC 261001-EN, Ed. 5
Enclosures, non-metallic
Degree of protection IP 65
Colour Weight,
Size top/bottom Type Order Code kg
28 ABB
1SFC 261001-EN, Ed. 5
Enclosures, non-metallic
Accessories
Weight,
Description Type Order Code kg
Protective sleeve
To make a rear mounted lamp block screen protected, IP 20.
Protective sleeve 5396 0543-1 0.002
Cable gland
Black plastic. Threaded outer sleeve. Sealing ring Pr 22.5 included.
Sleeve diameter Sealing
Pr Pg min. mm diameter mm
22.5 16 18 9 – 15 SK 175 931-AF 0.010
28.3 21 24 12 - 20 SK 175 931-AK 0.017
Nut
Black plastic. For cable gland above.
Pr Pg
22.5 16 SK 175 923-3 0.002
28.3 21 SK 175 923-4 0.004
Earthing terminal
For non-metallic enclosure. 1-seat enclosure has space for one terminal
and the others have space for two terminals.
Earthing device SK 615 017-A 0.005
Spacer
1mm thick. Needed when legend plates are not used in non-metallic enclosures.
Spacer SK 615 516-1 0.002
Spacer for Emergency Stop
Pushbutton on page 14 1SFA 616 920 R8045 0.004
Blanking plug
Black non-metallic SK 616 502-B 0.030
Impact protection
For increased protection against heavy shocks.
Impact protection SK 616 590-D 0.010
Adapter plate
For Emergency Stop pushbuttons on page 14. For rear mounted
contact blocks and lamp blocks. 1SFA 616 920 R8014 0.007
ABB 29
1SFC 261001-EN, Ed. 5
Selector switches, two positions
Only for vertically mounted enclosures
Handle Weight,
Symbol colour Type Order Code kg
30 ABB
1SFC 261001-EN, Ed. 5
Selector switches, three positions
Only for vertically mounted enclosures
Handle Weight,
Symbol colour Type Order Code kg
ABB 31
1SFC 261001-EN, Ed. 5
Enclosures, metallic
Degree of protection IP 671)
Weight,
Size Colour Type Order Code kg
1) Pushbuttons with sealing 2) Flanges are not included Dimension drawings, see p. 60.
membrane
32 ABB
1SFC 261001-EN, Ed. 5
Enclosures, metallic
Accessories
Weight,
Description Order Code kg
Cable gland
Metal. Threaded outer sleeve. Sealing ring Pr 22.5 (Pg 16) included.
Sealing
Pr Pg diameter mm
22.5 16 8.5 – 11.5 SK 170 7685 0.040
22.5 16 10.5 – 13.5 SK 170 7686 0.045
22.5 16 12.5 – 15.0 SK 170 7687 0.050
Hexagon nut
Metal.
Sealing ring
Rubber.
Blanking plates
Without holes. Metal. Black. For 4- and 6-seat enclosures. Note: Gasket not included
For flange Suitable flange gasket
opening Order Code
FL 13 SK 170 4536 SK 172 105-AA 0.110
With holes. Metal. Black. For 4- and 6-seat enclosures. Note: Gasket not included
For flange Suitable flange gasket
opening Order Code
Two threaded holes Pr 22.5 (Pg 16). Hole centre distance 50 mm.
FL 13 SK 170 4536 SK 172 105-AD 0.110
Three threaded holes Pr 22.5 (Pg 16). Hole centre distance 38 mm.
FL 13 SK 170 4536 SK 172 105-AE 0.100
Four threaded holes Pr 22.5 (Pg 16). Hole centre distance 30 mm.
FL 13 SK 170 4536 SK 172 105-AF 0.100
Flange gasket
FL 13 SK 170 4536 0.005
Blanking plug
Applicable to cover a 22 mm-hole in an
enclosure instead of an operator.
Gasket and nut included.
Black non-metallic SK 616 502-B 0.030
Sealing plug
Plastic. Black.
For holes
Pr 22.5 Pg 16 SK 175 919-3 0.010
ABB 33
1SFC 261001-EN, Ed. 5
Assembled stations
Non-metallic enclosures
Degree of protection IP 65, (dependent on the degree of protection of each pushbutton)
1-seat, grey top/black bottom
One pushbutton – momentary
1 – I – – White – 1SFA 616 811 R1002 0.045
1 – I – – Green – 1SFA 616 811 R1001 0.045
2 – O – – Black – 1SFA 616 811 R1004 0.045
2 – O – – Red – 1SFA 616 811 R1003 0.045
Metallic enclosures
1-seat, grey
One pushbutton – momentary
Degree of protection IP 66.
1 – I – – Green – 1SFA 616 831 R1001 0.429
1
) Accessories, see p. 35.
Dimension drawings, see p. 60.
34 ABB
1SFC 261001-EN, Ed. 5
Accessories
Contact blocks, lamp blocks and holders
Max. number
of blocks Included Weight,
in holder blocks Type Order Code kg
Contact blocks and lamp blocks with holder for front mounting
For non-illuminated operators
3 1 NC KCBH-01 1SFA 616 600 R1110 0.019
3 1 NO KCBH-10 1SFA 616 600 R1101 0.019
3 2 NC KCBH-02 1SFA 616 600 R1120 0.032
3 2 NO KCBH-20 1SFA 616 600 R1102 0.032
3 3 NC KCBH-03 1SFA 616 600 R1130 0.045
3 3 NO KCBH-30 1SFA 616 600 R1103 0.045
3 1 NO + 1 NC KCBH-11 1SFA 616 600 R1111 0.032
3 1 NO + 2 NC KCBH-12 1SFA 616 600 R1121 0.045
3 2 NO + 1 NC KCBH-21 1SFA 616 600 R1112 0.045
Holders
Holder for front mounting.
For three blocks KCBH-00 SK 616 013-F 0.006
For five blocks KCBH5-00 1SFA 616 601 R1100 0.008
1) Contact blocks and lamp blocks For lamp blocks with transformer
for rear mounting, see page 29. and transformer blocks,
see page 36.
ABB 35
1SFC 261001-EN, Ed. 5
Accessories
Transformer blocks, diode blocks and bulbs.
Ba 9s base
Diode block
To be used if several lamps are to be connected to a common lamp-test pushbutton. A diode must be
connected in series with each lamp. The diode block snaps onto the lamp block or is placed at the side.
Diode block KDB-1001 SK 616 009-A 0.015
Filament bulbs
Type of current: AC/DC. A lamp changing tool is required for changing bulb.
Rated Rated Rated Luminance Service
voltage current output mcd life
6V 200 mA 1.2 W 350 10 000 h 5911 086-11 0.002
12 V 100 mA 1.2 W 230 10 000 h 5911 086-12 0.002
24 V 50 mA 1.2 W 280 10 000 h 5911 086-13 0.002
30 V 40 mA 1.2 W 250 10 000 h 5911 086- 4 0.002
48 V 42 mA 2W 500 6 000 h 5911 086- 5 0.002
60 V 20 mA 1.2 W 190 5 000 h 5911 086-14 0.002
110 V 18 mA 2W 250 7 500 h 5911 086- 7 0.002
130 V 15 mA 2W 120 7 500 h 5911 086-15 0.002
36 ABB
1SFC 261001-EN, Ed. 5
Accessories
LEDs. Ba 9s base.
Weight
Description Order Code kg
LED
With one diode chip mounted on a Ba 9s base.
Choose the same colour for the LED and the lamp cap or else use a clear lamp cap. White LED only with
clear lamp cap.
At DC the lamp base have to be connected to cathode (-) and the bottom contact to anode (+).
Rated Rated Wave-
voltage current Colour length Luminance
Type of current: DC 1) Service life >?? 000 hours.
12 V 15 mA Red 630 nm 250 mcd 1SFA 616 921 R2011 0.005
12 V 15 mA Green 525 nm 1000 mcd 1SFA 616 921 R2012 0.005
12 V 15 mA Yellow 592 nm 250 mcd 1SFA 616 921 R2013 0.005
12 V 15 mA Blue 470 nm 450 mcd 1SFA 616 921 R2014 0.005
12 V 15 mA White x=0.31 600 mcd 1SFA 616 921 R2015 0.005
y=3,2
Type of current: (AC)/DC 1) Service life >50 000 hours.
24 V 15 mA Red 630 nm 250 mcd 1SFA 616 921 R2021 0.005
24 V 15 mA Green 525 nm 800 mcd 1SFA 616 921 R2022 0.005
24 V 15 mA Yellow 592 nm 250 mcd 1SFA 616 921 R2023 0.005
24 V 15 mA Blue 470 nm 400 mcd 1SFA 616 921 R2024 0.005
24 V 15 mA White x=0.31 500 mcd 1SFA 616 921 R2025 0.005
y=3,2
Type of current: (AC)/DC 1) Service life >50 000 hours.
48 V 12 mA Red 630 nm 200 mcd 1SFA 616 921 R2041 0.005
48 V 12 mA Yellow 525 nm 640 mcd 1SFA 616 921 R2042 0.005
48 V 12 mA Green 592 nm 200 mcd 1SFA 616 921 R2043 0.005
48 V 12 mA Blue 470 nm 320 mcd 1SFA 616 921 R2044 0.005
48 V 12 mA White x=0.31 400 mcd 1SFA 616 921 R2045 0.005
y=3,2
Type of current: AC/DC 1) Service life >50 000 hours.
60 V 10 mA Red 630 nm 160mcd 1SFA 616 921 R2051 0.005
60 V 10 mA Yellow 525 nm 530 mcd 1SFA 616 921 R2052 0.005
60 V 10 mA Green 592 nm 160 mcd 1SFA 616 921 R2053 0.005
60 V 10 mA Blue 470 nm 260 mcd 1SFA 616 921 R2054 0.005
60 V 10 mA White x=0.31 330 mcd 1SFA 616 921 R2055 0.005
y=3,2
1)
At AC the luminance is decreased with 30 % and there is also a slight flickering
Type of current: AC Service life 25 000 hours.
110-130 V 4-6 mA Red 630 nm 25-35 mcd 1SFA 616 921 R2131 0.005
110-130 V 4-6 mA Green 525 nm 300-350 mcd 1SFA 616 921 R2132 0.005
110-130 V 4-6 mA Yellow 592 nm 60-90 mcd 1SFA 616 921 R2133 0.005
110-130 V 4-6 mA Blue 470 nm 130-150 mcd 1SFA 616 921 R2134 0.005
110-130 V 4-6 mA White x=0.31 160-200 mcd 1SFA 616 921 R2135 0.005
y=3,2
Type of current: AC/DC Service life 25 000 hours.
110-130 V 4-6 mA Red 630 nm 25-35 mcd 1SFA 616 921 R2141 0.005
110-130 V 4-6 mA Green 525 nm 300-350 mcd 1SFA 616 921 R2142 0.005
110-130 V 4-6 mA Yellow 592 nm 60-90 mcd 1SFA 616 921 R2143 0.005
110-130 V 4-6 mA Blue 470 nm 110-130 mcd 1SFA 616 921 R2144 0.005
110-130 V 4-6 mA White x=0.31 160-200 mcd 1SFA 616 921 R2135 0.005
y=3,2
Type of current: AC Service life 25 000 hours.
230 V 4 mA Red 630 nm 25 mcd 1SFA 616 921 R2221 0.005
230 V 4 mA Green 525 nm 300 mcd 1SFA 616 921 R2222 0.005
230 V 4 mA Yellow 592 nm 60 mcd 1SFA 616 921 R2223 0.005
230 V 4 mA Blue 470 nm 130 mcd 1SFA 616 921 R2224 0.005
230 V 4 mA White x=0.31 160 mcd 1SFA 616 921 R2225 0.005
y=3,2
Flashing LED
A lamp changing tool is required for changing bulb.
Choose the same colour for the LED and the lamp cap or else use a clear lamp cap.
The lamp base have to be connected to cathode (-) and the bottom contact to anode (+).
Type of current DC.
Rated Rated Wave Service
voltage current Colour length life
24 V 25 mA Red 630 nm 50 000 h 4950 512-1 0.005
24 V 25 mA Green 565 nm 50 000 h 4950 512-2 0.005
24 V 25 mA Yellow 585 nm 50 000 h 4950 512-3 0.005
ABB 37
1SFC 261001-EN, Ed. 5
Accessories
Miscellaneous
Weight
Description Type Order Code kg
Mounting tool
Used for tightening the nut of the attachment device in confined spaces.
1SFA 616 920 R8015 0.021
Membrane of silicone
Of transparent, heat and cold resistant silicon rubber. Does not harden at low temperature.
Gives IP 67 degree of protection. When membrane is used, remove the gasket.
For operator with: Flush button 1SFA 616 920 R8052 0.002
Extended button 1SFA 616 920 R8002 0.002
Double pushbutton SK 616 503-4 0.002
Sealing shroud
For key-operated selector switches KA1-8036 1SFA 616 920 R8036 0.020
Protective ring
To prevent inadvertant operation.
Not together with legend plate holder. SK 615 512-1 0.002
Protective cover
For flush button. To prevent inadvertant operation.
Not together with legend plate holder. 1SFA 616 920 R8010 0.008
Extra key
Ronis 455 (Key code 71) SK 616 021-71 0.007
Ronis 421 (Key code 72) SK 616 021-72 0.007
Ronis 3433-E (Key code 73) SK 616 021-73 0.007
Label sheet
For marking of contact blocks at two levels. 2949 1725-1 0.001
Guide washer
To improve antirotation 2154 373-2 0.001
38 ABB
1SFC 261001-EN, Ed. 5
Accessories
Legend plates – Survey
Toggle switches,
two-positions
page 43
● Silver-grey aluminium
Toggle switches,
three-positions
page 43
rg e n c
me
E
Stop
ABB 39
1SFC 261001-EN, Ed. 5
Accessories
Legend plates for pushbuttons
Silver-grey
Aluminium
Symbol/text Order Code Weight, kg
Swedish
Back SK 615 550-12 0.002
Drift SK 615 550-15 0.002
Fel SK 615 550-16 0.002
Fram SK 615 550-18 0.002
Framryckning SK 615 550-19 0.002
Från SK 615 550-20 0.002
Hög SK 615 550-27 0.002
Höger SK 615 550-28 0.002
In SK 615 550-29 0.002
Låg SK 615 550-32 0.002
Manöverspänning SK 615 550-33 0.002
Minskar SK 615 550-34 0.002
Ned SK 615 550-35 0.002
Normal SK 615 550-37 0.002
Nödstopp SK 615 550-38 0.002
Prov SK 615 550-39 0.002
Start SK 615 550-44 0.002
Stopp SK 615 550-45 0.002
Stänger SK 615 550-46 0.002
Till SK 615 550-47 0.002
Upp SK 615 550-48 0.002
Ut SK 615 550-49 0.002
Utlösning SK 615 550-50 0.002
Vänster SK 615 550-51 0.002
Återställning SK 615 550-52 0.002
Ökar SK 615 550-53 0.002
Öppnar SK 615 550-54 0.002
1)
Text height 3 mm.
40 ABB
1SFC 261001-EN, Ed. 5
Accessories
Legend plates for two-position selector switches
Silver-grey Silver-Grey
Symbol/text Aluminium Laminated plastic
Centre Right Order Code Order Code Weight, kg
Swedish
Från Till SK 615 550-70 0.002
Hand Auto SK 615 550-71 0.002
Låg Hög SK 615 550-72 0.002
Prov Drift SK 615 550-73 0.002
Stopp Start SK 615 550-74 0.002
Without heading
H = 39 mm SK 615 999-1 SK 616 999-21 0.002
When ordering state (in addition to Cat. No.):
H = 39 mm – Centre text (max 5 characters)
– Right text (max 5 characters)
With heading
H = 44.5 mm SK 615 999-2 SK 616 999-22 0.002
When ordering state (in addition to Cat. No.):
– Heading text (max. 11 characters)
– Centre text (max. 5 characters)
– Right text (max. 5 characters)
H = 44.5 mm
1)
Text height 3 mm. Only the initial character is upper case unless other is stated.
ABB 41
1SFC 261001-EN, Ed. 5
Accessories
Legend plates for three-position selector switches
Silver-grey Silver-Grey
Symbol/text Aluminium Laminated plastic
Left Centre Right Order Code Order Code Weight, kg
Swedish
Hand O Auto SK 615 550-80 0.002
With heading
H = 44.5 mm SK 615 999-2 SK 616 999-22 0.002
When ordering state (in addition to Cat. No.):
– Heading text (max. 11 characters)
– Left text (max. 5 characters)
– Centre text (max. 5 characters)
– Right text (max. 5 characters)
H = 44.5 mm 1)
Text height 3 mm. Only the initial character is upper case unless other is stated.
42 ABB
1SFC 261001-EN, Ed. 5
Accessories
Legend plates for toggle switches
Silver-grey Silver-Grey
Aluminium Laminated plastic
Text Order Code Order Code Weight, kg
1)
Text height 3 mm. Only the initial character is upper case unless other is stated.
ABB 43
1SFC 261001-EN, Ed. 5
Accessories
Legend plates for pushbuttons
Silver-grey
Aluminium
Text Order Code Weight, kg
Fixed legend plates (for pushbuttons, mushroom buttons and pilot lights) 1)
Black/white
plastic
Symbol/Text Order code Weight, kg
Without text
For 1-2 text lines
H = 39 mm SK 616 540-2 0.002
1)
Text height 3 mm. Only the initial character is upper case unless other is stated.
44 ABB
1SFC 261001-EN, Ed. 5
Accessories
Special legend plates
Symbol plate
29.6 x 44.5 mm Symbol plate SK 615 562-87 0.002
Scale 0 - 10 SK 615 562-88 0.002
Scale 0-10
ABB 45
1SFC 261001-EN, Ed. 5
Accessories
Text caps
Can be turned 90°or 180° Stopp White 1SFA 616 901R2031 1SFA 616 902R2031 1SFA 616 903R2031 0.001
Characters per line R White 1SFA 616 901R2019 1SFA 616 902R2019 1SFA 616 903R2019 0.001
One line (line 11): max. 6 Black 1SFA 616 908R9009 1SFA 616 909R9009 – 0.001
Two lines:
upper (line 21): max. 5 On White 1SFA 616 901R1020 1SFA 616 902R1020 1SFA 616 903R1020 0.001
lower (line 22): max. 5
ON White 1SFA 616 901R1039 – 1SFA 616 903R1039 0.001
Green 1SFA 616 906R1039 – – 0.001
Pilot light Black 1SFA 616 908R1039 – – 0.001
Off White 1SFA 616 901R1019 1SFA 616 902R1019 1SFA 616 903R1019 0.001
OFF White – 1SFA 616 902R1040 – 0.001
Red – 1SFA 616 905R1040 – 0.001
Black – 1SFA 616 909R1040 – 0.001
Stop White 1SFA 616 901R1031 1SFA 616 902R1031 1SFA 616 903R1031 0.001
Characters per line
One line (line 11): max. 8 STOP Red 1SFA 616 904R1047 1SFA 616 905R1047 – 0.001
Two lines:
upper (line 21): max. 8 Reset White 1SFA 616 901R1025 1SFA 616 902R1025 1SFA 616 903R1025 0.001
lower (line 22): max. 8
Ein White 1SFA 616 901R6020 1SFA 616 902R6020 1SFA 616 903R6020 0.001
Aus White 1SFA 616 901R6019 1SFA 616 902R6019 1SFA 616 903R6019 0.001
Without text White 1SFA 616 901R9000 1SFA 616 902R9000 1SFA 616 903R9000 0.001
With customer
selected text2) White 1SFA 616 901R9001 1SFA 616 902R9001 1SFA 616 903R9001 0.001
1)
Use only white caps for illuminated pushbuttons and pilot lights
2) When ordering, please state text and position:
- one line (middle), max. 6 characters.
- two lines (upper and lower), max. 5 or 8 characters.
Only the initial character is upper case unless other is stated.
46 ABB
1SFC 261001-EN, Ed. 5
Accessories
Text caps
Flush Extended
Text caps for illuminated pushbuttons and pilot lights
button button O White 1SFA 616 901R9004 1SFA 616 902R9004 1SFA 616 903R9004 0.001
Red 1SFA 616 904R9004 1SFA 616 905R9004 – 0.001
Black 1SFA 616 908R9004 – – 0.001
I White 1SFA 616 901R9002 1SFA 616 902R9002 1SFA 616 903R9002 0.001
Green 1SFA 616 906R9002 – – 0.001
Black 1SFA 616 908R9002 – – 0.001
Can be turned 90°or 180°
II White 1SFA 616 901R9003 1SFA 616 902R9003 1SFA 616 903R9003 0.001
Green 1SFA 616 906R9003 – – 0.001
Pilot light
Black 1SFA 616 908R9003 – – 0.001
III White 1SFA 616 901R9028 1SFA 616 902R9028 – 0.001
Black 1SFA 616 908R9028 – – 0.001
+ White 1SFA 616 901R9011 1SFA 616 902R9011 – 0.001
Green 1SFA 616 906R9011 – – 0.001
Black 1SFA 616 908R9011 – – 0.001
– White 1SFA 616 901R9012 – – 0.001
Red 1SFA 616 904R9012 – – 0.001
Black 1SFA 616 908R9012 – – 0.001
White 1SFA 616 901R9005 1SFA 616 902R9005 1SFA 616 903R9005 0.001
Black 1SFA 616 908R9005 – – 0.001
White 1SFA 616 901R9014 1SFA 616 902R9014 – 0.001
Black 1SFA 616 908R9014 – – 0.001
White 1SFA 616 901R9015 1SFA 616 902R9015 – 0.001
Black 1SFA 616 908R9015 – – 0.001
White 1SFA 616 901R9016 1SFA 616 902R9016 – 0.001
Black 1SFA 616 908R9016 – – 0.001
White 1SFA 616 901R9017 1SFA 616 902R9017 – 0.001
Black 1SFA 616 908R9017 – – 0.001
White 1SFA 616 901R9006 1SFA 616 902R9006 1SFA 616 903R9006 0.001
White 1SFA 616 901R9018 1SFA 616 902R9018 – 0.001
Black 1SFA 616 908R9018 – – 0.001
White 1SFA 616 901R9019 1SFA 616 902R9019 – 0.001
Black 1SFA 616 908R9019 – – 0.001
White 1SFA 616 901R9020 1SFA 616 902R9020 – 0.001
Black 1SFA 616 908R9020 – – 0.001
White 1SFA 616 901R9021 1SFA 616 902R9021 – 0.001
Black 1SFA 616 908R9021 – – 0.001
White 1SFA 616 901R9022 1SFA 616 902R9022 – 0.001
Black 1SFA 616 908R9022 – – 0.001
White 1SFA 616 901R9023 1SFA 616 902R9023 – 0.001
Black 1SFA 616 908R9023 – – 0.001
White 1SFA 616 901R9024 1SFA 616 902R9024 – 0.001
Black 1SFA 616 908R9024 – – 0.001
White 1SFA 616 901R9025 1SFA 616 902R9025 – 0.001
Black 1SFA 616 908R9025 – – 0.001
White 1SFA 616 901R9026 1SFA 616 902R9026 – 0.001
Black 1SFA 616 908R9026 – – 0.001
White 1SFA 616 901R9027 1SFA 616 902R9027 – 0.001
Black 1SFA 616 908R9027 – – 0.001
1)
Use only white caps for illuminated pushbuttons and pilot lights.
ABB 47
1SFC 261001-EN, Ed. 5
Accessories
Special legend plates
Text
Front Rear Order Code Weight, kg
36
▼
Inserts
With text/symbols
O I SK 615 570-30 0.001
SK 615 582-18 0.001
English
Close Open SK 615 569-10 0.001
On Off SK 615 569-11 0.001
Fast Slow SK 615 569-12 0.001
Down Up SK 615 569-13 0.001
Emerg.stop Release SK 615 569-14 0.001
Cancel Reset SK 615 569-15 0.001
In Out SK 615 569-16 0.001
Lower Raise SK 615 569-17 0.001
Start Stop SK 615 569-18 0.001
Inching Jog SK 615 569-19 0.001
Run Full SK 615 569-20 0.001
Forward Reverse SK 615 569-21 0.001
Swedish
Autom.regl Handregl. SK 615 570-10 0.001
Fram Back SK 615 570-11 0.001
Blockering Deblockering SK 615 570-12 0.001
Drift Prov SK 615 570-13 0.001
Fel Normal SK 615 570-14 0.001
Fort Sakta SK 615 570-15 0.001
Framryckn. Man.-spänning SK 615 570-16 0.001
Till Från SK 615 570-17 0.001
Full Klart SK 615 570-18 0.001
Nollställning Inställning SK 615 570-19 0.001
Hög Läg SK 615 570-20 0.001
Höger Vänster SK 615 570-21 0.001
In Ut SK 615 570-22 0.001
Ökar Minskar SK 615 570-23 0.001
Upp Ned SK 615 570-24 0.001
Nödstopp Snabbstopp SK 615 570-25 0.001
Sakta ned Sakta upp SK 615 570-26 0.001
Start Stopp SK 615 570-27 0.001
Stänger Öppnar SK 615 570-28 0.001
Utlösning Återställning SK 615 570-29 0.001
48 ABB
1SFC 261001-EN, Ed. 5
Accessories
Special legend plates
Silver-grey aluminium.
For three-pos. selector switch
Without text SK 615 563-1 0.001
With text SK 615 999-5 0.001
Plastic inserts with one side black and the other white
Engraving will give either white or black text.
Without text SK 615 563-2 0.001
When ordering, please state: 1. Text (line 1, 11 or 12, max. 11 characters per line)
2. Left (line 31, max. 5 characters per line)
Centre (line 21 or 32, max. 5 characters per line)
Right (line 22 or 33, max. 5 characters per line)
3. Black or white side
4. Note: Only the initial character will be upper case unless other is stated.
ABB 49
1SFC 261001-EN, Ed. 5
Order form – assembled stations
Non-metallic enclosures
6
5
4 4
3 3 3
2 2 2
2 1 1
1 1 1
The non-metallic enclosures are available in five different sizes, intended for 1 to 6 pushbuttons/pilot
lights etc.
Specify the number of seats, 1, 2, 3, 4 or 6.
Contact blocks, lamp blocks and transformer blocks are snapped on to a built-in DIN rail in the base.
In addition to the three positions for each seat, there is further space (=position 4) for using an extra
block. See the figure below.
❑ ❑ ❑ ■ ❑ ❑ ❑ ■ ❑ ❑ ❑ ■ ❑ ❑ ❑ ■ ❑ ❑ ❑ ■ ❑ ❑ ❑ ■
3. Mode of mounting The non-metallic enclosures can be horizontally or vertically mounted. Mark the alternative of your
choice with an X.
For vertically mounted enclosures legend plates of height=39 mm can be used only. There are also
special selector switches available for vertical mounting. See page 30–31.
4. Operators Are selected according to page 6–22. Specify the order number for the required operator.
5.1 Contact block and
lamp block Mark the required block with an X. N.B. Normally three markings per seat. Extra blocks in shaded box.
5.2 Transformer block
Put in X against your choice. Select according to page 36. Takes up three positions. Place a blanking
plug on the mounting hole in the seat that is taken up by a transformer block. Enter the required code
letter in the sub-part of the order number.
6. Legend plates Fixed plates and caps can be selected with text according to the legend plate section, page 40–49, with
engraved plates or customer-selected texts. Specify the order number only for catalogued options. When
ordering customised texts specify the engraving template and the required text for each line/position.
N.B. It is not possible to provide double pushbuttons with legend plates. Instead the buttons can be
marked.
7. Accessories for non-metallic enclosures
See page 29. Specify quantity and order number.
8. Accessories/Special requirements
See page 37–38. N.B. filament bulbs, neon bulbs and LEDs are not included. They are to be ordered
separately. Specify quantity and order number.
50 ABB
1SFC 261001-EN, Ed. 5
Non-metallic enclosed pilot devices Order form
To Ref. Date Rev.
come in handy at the next ordering occasion.
Feel free to make copies of this form. It might
3. Enclosure size
1-seat 2-seat 3-seat 4-seat 6-seat
■ SK 616 801-AA ■ SK 616 802-AA ■ SK 616 803-AA ■ SK 616 804-AA ■ SK 616 806-AA
5.1 Contact blocks, lamp blocks (for rear mounting) N.B. normally three blocks in all per seat. ■ = disposable seat for extra block
Max. 3+1 block/seat Seat 1 Seat 2 Seat 3 Seat 4 Seat 5 Seat 6
Positions per seat 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
SK 616 003-F ❑ ❑ ❑ ❑ ❑ ❑
KLB-3B
Fixed plate for: Pushbutton, pilot lights Selector switch Selector switch Toggle Toggle Caps with
Order form 1SFC 16103-55EN CRL/XM 990217
Engraving template A B 2) C D 2) E F 2) G H
1) Silver-grey. Brushed aluminium on black plastic. Yellow for EMERGENCY STOP. 2) Only for enclosures horizontally mounted.
7. Accessories for non-metallic enclosures See page 29. 8. Accessories/Special requirements See page 37.
ABB 51
1SFC 261001-EN, Ed. 5
Order form – assembled stations
Metallic enclosures
2 3 2 3
2 2 6
1 1 1 4 1 5
3 4
The metal enclosures are available in five different sizes, intended for 1 to 6 pushbuttons/pilot lights etc.
Specify the number of seats, 1, 2, 3, 4 or 6.
Contact blocks, lamp blocks and transformer blocks are front mounted. 5-block holder can be used.
3. Operators Are selected according to page 6-22. Specify the order number for the required operator.
4.1 Contact block and
lamp block Mark the required block with an X. N.B. Normally three markings per seat.
4.2 Transformer block
Put in X against your choice. Select according to page 36. Takes up three positions. Place a blanking
plug on the mounting hole in the seat that is taken up by a transformer block. Enter the required code
letter in the sub-part of the order number.
5. Legend plates Fixed plates and caps can be selected with text according to the legend plate section's options with
engraved plates or customer-selected texts. Specify the order number only for catalogued options.
When ordering customised texts specify the engraving template and the required text for each line/
position. N.B. It is not possible to provide double pushbuttons with legend plates. Instead the buttons
can be marked.
6. Accessories for metal-enclosures
See page 33. Specify quantity and order number.
7. Accessories/Special requirements
See page 37–38. N.B. filament bulbs, neon bulbs and LEDs are not included. They are to be ordered
separately. Specify quantity and order number.
52 ABB
1SFC 261001-EN, Ed. 5
Metal-enclosed pilot devices Order form
come in handy at the next ordering occasion.
Feel free to make copies of this form. It might
To Ref. Date Rev.
2. Enclosure size
1-seat 2-seat 3-seat 4-seat 6-seat
■ SK 616 701-AA ■ SK 616 702-AA ■ SK 616 703-AA ■ SK 616 704-AA ■ SK 616 706-AA
4.1 Contact block, lamp block (for front mounting) N.B. Max. three blocks in all per seat with 3-block holders..
Seat 1 Seat 2 Seat 3 Seat 4 Seat 5 Seat 6
Position 3-block holder 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3
Contact block ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
SK 616 001-A
KCB -10
SK 616 001-B ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
KCB -01
Lamp block
SK 616 003-A ❑ ❑ ❑ ❑ ❑ ❑
KLB -1
SK 616 003-B ❑ ❑ ❑ ❑ ❑ ❑
KLB -2
SK 616 003-C ❑ ❑ ❑ ❑ ❑ ❑
KLB -3
6. Accessories for metal enclosures See page 33. 7. Accessories/Special requirements See page 37-38.
Qty .... Cable gland, incl. nut
.... Earthing device
.... Cover plate with n no. of bushings
ABB 53
1SFC 261001-EN, Ed. 5
Technical data
A003248
54 ABB
1SFC 261001-EN, Ed. 5
Technical data
Ud/Um
Terminals
Plus-minus pozidrive size 2 screw with DIN-washer.
Lamp comparisation
Connectable area min. 1 x 0,5 mm2
max. 2 x 2,5 mm2 Bulb Approx. Shock and High Low power Brightness
type service vibration operating consumption
Recommended torque 0,9 Nm
life (hours) immunity temperature
Filament 5000–
10 000 + + + +++
Contact blocks
LED 25 000–
Mechanical endurance 10 million operations
50 000 +++ ++ ++ ++
Self cleaning contacts of silver, NC contact has forced breaking.
At voltages and currents below 24 V and 5.6 mA two contact blocks in Very good +++
parallel are recommended. As an alternative, gold plated contacts are Good ++
Less good +
recommended.
Ratings as per UL/CSA, NEMA A 600, Q600
Rated insulation voltage 600 V Lens colours suitable for:
Rated thermal current 10 A
Filament
Rated operational current at 120 V 6A
bulbs LEDs
240 V 3A
480 V 1.5 A Red ● ●
600 V 1.2 A Green ● ●
Ratings as per IEC 947-5-1 Yellow ● ●
Rated insulation voltage, Ui 690 V Blue ● ●
Rated thermal current, Ith 10 A White ● ●
Rated operational current, Ie Clear ● ●
utilisation category AC 15, at 120 V 8A
230 V 6A
400 V 4A Transformer block
690 V 2A Suitable for filament bulb 6 or 24 V AC and 1.2 W and LED 24 V.
Rated operational current, Ie
utilisation category DC 13, at 24 V 5A Rated power 1.5 W
125 V 1.1 A Rated voltage Ratio, see
250 V 0.55 A Accessories page 36
Contact resistance 25 mΩ Rated insulation voltage acc. to IEC
Max. number of contact blocks per operator 1) 70 °C (∆T) Class E
Pushbutton, toggle switch 6
Mushroom pushbutton 5
Double pushbutton, selector switch and
key operated selector switch, emergency
stop pushbutton 4
1)
The contact blocks can be stacked in max. two levels.
Short circuit protection
Max. fuse at 1 kA 16 A ordinary
10 A delayed
ABB 55
1SFC 261001-EN, Ed. 5
Dimensions
30 56 25,5 25,5
Extended
Ø29 Ø29
Dimensions in mm.
56 ABB
1SFC 261001-EN, Ed. 5
Dimensions
1) Length of stroke.
2) Can be cut to desired length.
Drilling plans for pushbuttons, Drilling plan for Drilling plan for 30 mm adaptor
switches and pilot lights double pushbutton
1)
2)
30 30
1)
55 mm when legend plate H= 44.5 mm is used.
61 mm for mushroom pushbutton with D=60 mm
2)
37 mm when legend plate with insert is used,
90
50
30 5
29
ABB 57
1SFC 261001-EN, Ed. 5
Dimensions
Signal Tower K 70 Contact box for cable exit at side Base for tube, plastic
ø 70
ø 70
Rubber
15°
54 seal
2
4.
PG 11
ø
43
15
5
5.
ø
Base for tube, metal
Contact box with magnetic base
PG 11
408
46
32
352
296
56
240
ø 25
85
110
ø 70
ø 10.5
54
ø 5.5
ø 70
ø 70
Dimensions in mm.
58 ABB
1SFC 261001-EN, Ed. 5
Dimensions
3
64.5
16
22
7
32
Pg29 (ø 37)
ø 75
ABB 59
1SFC 261001-EN, Ed. 5
Dimensions
1) 1) 1)
2)
4 seats 6 seats
1) 1) 2)
Enclosures, metallic
1 seat 2 or 3 seats 4 or 6 seats
Dimensions in mm.
60 ABB
1SFC 261001-EN, Ed. 5
ABB 61
1SFC 261001-EN, Ed. 5
☞ www.abb.com/lowvoltage ☞ left menu: "Low Voltage On-Line" ☞ select: "Contact Us"
62 ABB
1SFC 261001-EN, Ed. 5
☞ www.abb.com/lowvoltage ☞ left menu: "Low Voltage On-Line" ☞ select: "Contact Us"
ABB 63
1SFC 261001-EN, Ed. 5
Colour selection
Pushbuttons
Emergency, even in combination with Off, is to be RED.
Stop and Off can be white, grey or black, with preference for BLACK. Red is also allowed.
Start and On can be white, grey or black, with preference for WHITE. Green is also allowed.
Start and stop in combination can be white, grey or black. Yellow, green or red must not be used.
Reset is to be blue, white, grey or black, with preference for BLUE.
Reset with stop function can be white, grey or black, with preference for BLACK. Red is also allowed.
Illuminated pushbuttons
The red colour of Emergency must be on the operator itself and is not to be dependent on transmitted light.
For other functions, see Pushbuttons. When in doubt, use white (neutral).
Pilot lights
Pilot lights are to be given colours according to the table above. When in doubt, use white (neutral).
64 ABB
1SFC 261001-EN, Ed. 5
Index of Cat. Nos.
CL 22 KPD 8 - 10
KA70 25 KPK 11
KASB 26 KPM.-... 12
KASI 25 KPMT.-..., KPMK.-...,
KB 22 KPMP.-... 13, 14
KB70 25 KS70 25
KCB 29, 35 KSB 26
KCBH 22, 35 K2SS.-... 16, 18
KCBHS 14 K3SS.-... 17, 19
KDB 36 K2SSK.-..., K3SSK.-... 20
KEM 32 K2SSV.-... 30
KEP 28 K3SSV.-... 31
KL 22 KT 15
KL70 24 KT70 25
KLB 29, 35 KTS 21
KP 6-7
ABB 65
1SFC 261001-EN, Ed. 5
Explanation of type codes
Operators
Example 3: Type K PM1-10Y
K= "Generation" K
66 ABB
1SFC 261001-EN, Ed. 5