Professional Documents
Culture Documents
SYNOPSIS
In this project job is held between the lives and dead center. And grinding
attachment is fixed over the compound slide. The feed is given by movement of
carriage and depth of cut is given by movement of cross slide Grinding Wheel is
run by a Separate motor at 3500 Rpm. We can obtain the surface finish up to
4 deltas.
ADVANTAGES:
1. Production cost is very low.
2. No need of purchase special machine, save cost up to 1.5 lacks.
3. Taper grinding also performed.
4. It is mainly very useful to hold the lengthy circular rod in
particular position.
5. Its operated and maintenance is simple.
6. It is compact and portable.
7. It can be efficiently used.
8. It is simple and rigid in construction.
9. Manufacturing cost in lesser than other vice.
DISADVANTAGE: