Professional Documents
Culture Documents
org/student_take_quiz_assignment/start/35607040
Home
End of quiz
You are at the end; press Finished to complete and grade the quiz.
You can review your answers below and click Edit if you want to change any.
Finished
Question 1
Which metal from the following has the non-crystalline structure?
Question 2
A material with higher rebound will have a higher bounce when the hammer is dropped.
Response: True
Question 3
https://dlsud.edu20.org/student_take_quiz_assignment/start/35607040 1/5
11/21/22, 2:35 PM S-ECHE001LA CEE11 1st Sem ( 2022-2023 ) - https://dlsud.edu20.org/student_take_quiz_assignment/start/35607040
The compressive strength of cast iron is ____ that of its tensile strength
Question 4
If you can twist, bend, stretch or squeeze it, and when you let go it returns to its original shape, it's an elastic object.
Response: True
Question 5
Which hardness test uses the steel ball as indenter?
Question 6
Shape of true stress-strain curve for a material depends on:
Question 7
One way to release the internal stresses is a process called _____: the metal is heated to a temperature below its
melting point, and then allowed to cool slowly.
Response: annealing
Question 8
_____ is a measure of how much the material can be stretched before it fractures.
Response: Ductility
Question 9
Engineering stress-strain curve and True stress-strain curve are equal up to :
Question 10
Reversed stress cycle has symmetrical amplitude about a mean zero stress level.
Response: True
https://dlsud.edu20.org/student_take_quiz_assignment/start/35607040 2/5
11/21/22, 2:35 PM S-ECHE001LA CEE11 1st Sem ( 2022-2023 ) - https://dlsud.edu20.org/student_take_quiz_assignment/start/35607040
Question 11
The striking of a hammer to break stones, or the shaping of metallic shapes using the drop forging process are
example of _____
Response: impact
Question 12
Creep If a material is kept under a constant load over a long period of time, it undergoes permanent deformation. This
phenomenon is seen in many metals and several non-metals. For most materials, creep rate increases with increase in
_____.
Response: temperature
Question 13
What is a creep?
Question 14
_____ is measured by the energy transfer (i.e., in units of work) when a body with inertia collides with a part over a
very short time.
Response: Impact
Question 15
If a material is subjected to two incremental true strains namely ε1 and ε2, then the total true strain is
Response: ε1 + ε2
Question 16
We can say that true stress is lower than engineering stress.
Response: False
Question 17
Both Aluminum and Copper are good electrical conductors.
Response: False
Question 18
https://dlsud.edu20.org/student_take_quiz_assignment/start/35607040 3/5
11/21/22, 2:35 PM S-ECHE001LA CEE11 1st Sem ( 2022-2023 ) - https://dlsud.edu20.org/student_take_quiz_assignment/start/35607040
The material in which large deformation is possible before absolute failure by rupture is called ____________
Response: ductile
Question 19
Which test is conducted to measure the ability of a material to resist scratching, abrasion, deformation and
indentation?
Question 20
In compression, a prism of brittle material will break:
Question 21
Categorize the following examples of materials:
Question 22
Which of the following property is the fine-grained structure?
Response: Ductility
Question 23
For ductile failure. the material will have its initial necking followed by cavities to form a crack. Crack propagation
will follow until there will fracture of the material.
Response: True
Question 24
Plastic deformation results from the following :
Question 25
Which test is conducted to measure the endurance limit of the material?
Question 26
Rockwell test utilizes ___________ a measure of hardness.
https://dlsud.edu20.org/student_take_quiz_assignment/start/35607040 5/5