Professional Documents
Culture Documents
Página 1 de 2
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320C EXCAVATOR GLA
Configuration: 320C, 320C L, 320C LN Excavators GLA00001-UP (MACHINE) POWERED BY 3066 Engine
Torque Specifications
Torque Specifications
Media Number -SENR3130-14 Publication Date -01/01/2013 Date Updated -09/01/2013
i05213416
Torque is based on the diameter of the thread. The torque values are identical for coarse threads
and fine threads.
Note: The following table has the recommended standard torque value for tapered pipe thread
fitting for use on all Caterpillar equipment and Mitsubishi engines. Use Table 1 as a general
recommendation only. Actual values may vary due to variations in the material of the connector.
Actual values may vary due to variations in the characteristics of the threads.
Table 1
Tapered Pipe Thread Fittings
Standard Torque
Diameter of the Pipe Thread
(Inch) Assembly Turns after Hand
Torque
Tight
1/2 2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 02/02/2021
320C, 320C L, 320C LN Excavators GLA00001-UP (MACHINE) POWERED BY ... Página 2 de 2
Note: Use 50 percent of the torque values from Table 1 when fitting, plug, or the port material is
nonferrous.
Copyright 1993 - 2021 Caterpillar Inc. Tue Feb 2 23:46:48 UTC-0400 2021
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 02/02/2021