Professional Documents
Culture Documents
Operating Manual: 6.3.5 Clamping Arms Right and Left, Model T404-1L / T 414-1L
Operating Manual: 6.3.5 Clamping Arms Right and Left, Model T404-1L / T 414-1L
20
21
19
22
After 50h / every 500h thereafter
Check:
Screws (11) of the bars (2) and (3).
Screws (12) and nuts (13) of the swing bearings.
Screws (10) on the pressure plates (4), bars (2) and wear-off bars (6).
Screws (15, 16) on the wear-off-bar (7) and cover sheets (5).
Screws (19, 20) on the clamping arm plates coated with rubber (21, 22) -
optional.
Replace loose or damaged screws. Torque the screws as specified in Chapter 6.1
General.
Every 200h