This document provides technical specifications for maintenance of a power axle type AE 40-02, including:
1) Torque loadings of 1000Nm for the frame/power axle and 295Nm for the axle housing/gear reduction box.
2) An end play of +0.03mm to -0.06mm for the toothed hollow shaft.
3) Torque loadings of 35Nm for the centring flange/wheel hub and 70Nm for the oil drain plug.
4) A torque loading of 120Nm for the half shaft.
5) The gearbox oil capacity is 9.5 litres to be checked with a dipstick and the
This document provides technical specifications for maintenance of a power axle type AE 40-02, including:
1) Torque loadings of 1000Nm for the frame/power axle and 295Nm for the axle housing/gear reduction box.
2) An end play of +0.03mm to -0.06mm for the toothed hollow shaft.
3) Torque loadings of 35Nm for the centring flange/wheel hub and 70Nm for the oil drain plug.
4) A torque loading of 120Nm for the half shaft.
5) The gearbox oil capacity is 9.5 litres to be checked with a dipstick and the
This document provides technical specifications for maintenance of a power axle type AE 40-02, including:
1) Torque loadings of 1000Nm for the frame/power axle and 295Nm for the axle housing/gear reduction box.
2) An end play of +0.03mm to -0.06mm for the toothed hollow shaft.
3) Torque loadings of 35Nm for the centring flange/wheel hub and 70Nm for the oil drain plug.
4) A torque loading of 120Nm for the half shaft.
5) The gearbox oil capacity is 9.5 litres to be checked with a dipstick and the