Professional Documents
Culture Documents
Operating Manual: As Necessary
Operating Manual: As Necessary
As necessary
Renew worn or damaged strips (2) by removing the screws (1) and replacing the strip
(2). Reinstall the screws (1).
Renew worn or damaged pin (6) in the arm (9) by removing the cotter pin (10) and
washer (11). Tap the pin (6) out of the arm (9). Replace the pin (6) and reinstall the
washer (11) and cotter pin (10).
Renew worn or damaged spring plates (4) on the locked bale clamp (12) by removing
the cotter pin (10), washer (11), and pin (6). Tap the pin (6) out of the arm (9) and
remove the bale clamp (12). Remove the screw (3) from the spring plate (4), spacer (5),
and bale clamp (12). Replace the spring plate (4) and re-install spacer (5), spring plate
(4), and the screw (3). Reinstall the bale clamp (12) using pin (6), washer (11), and
cotter pin (10).
Renew worn industrial grade hose (13) or pin (7) at the optional stop (8) by removing
cotter pin (14) and washer (15). Replace industrial grade hose (13) or pin (7) and
reinstall the washer (15) and cotter pin (14).
Replace loose or damaged screws. Tighten the screws (1) to the torque 77 Nm.