The document provides technical specifications for various extrusion equipment components including a PP barrier screw, screw tip, hopper loader, bimetallic barrel, and retrofitment feeder sleeve. The specifications describe the materials, dimensions, and functions of each component in processing polypropylene material.
The document provides technical specifications for various extrusion equipment components including a PP barrier screw, screw tip, hopper loader, bimetallic barrel, and retrofitment feeder sleeve. The specifications describe the materials, dimensions, and functions of each component in processing polypropylene material.
The document provides technical specifications for various extrusion equipment components including a PP barrier screw, screw tip, hopper loader, bimetallic barrel, and retrofitment feeder sleeve. The specifications describe the materials, dimensions, and functions of each component in processing polypropylene material.
Material No Material Descp Technical Specifications
It is an Extrusion screw, installed inside
Barrel to transfer molten material (Polypropylene) to Extrusion Die in a 1115530390 uniform flow. PP Barrier Screw E-75 0 External Diameter : 75mm Length : 2200 mm approx. Material : Nitriding Steel
Screw tip is attached at the head of
1115549140 Extrusion Screw to maintain smooth flow Screw tip with pape screw (E75) 0 of molten material into Extrusion Die.
It is a material suction and transfer unit
that sucks the raw material (PP grains) 1247002001 Hopper loader CP300 and feeds it into the feeder sleeve 3 3x400V(±10%) 50/60H maintaining a uniform flow.
It houses the Extrusion Screw and molten
material (Polypropylene) flows inside it. 1120787300 Internal Diameter : 75mm Bimetallic Barrel E-75 0 External Diameter : 160mm Length : 2060 mm approx.
It is an assembly of Feeder sleeve and
feeder box housing. Feeder Sleeve: also known as Grooved Bush, transfers the material received from 1110012201 Retrofitment Feeder sleeve hopper loader into barrel. 5 complete withfeeder box housing Feeder Box Housing: it is a close chamber that helps cool down the Feeder Sleeve to stop reverse flow of molten material.