Professional Documents
Culture Documents
Push-in fittings
>> Port size: Ø 1/8” ... 1/2”, >> All taper threads
Ø 4 ... 12 mm tube size, pre-coated with
BSP and NPT threads non-PTFE based
>> Very compact units sealant
-20°C
(-4°F)
Technical features
Medium: Operating temperature: Tubing types: Materials:
Compressed air -20 ... +80°C (-4 ... +176°F) PA11 or 12, PU and other Body: nickel plated brass
(for other media please consult “Special” low temperature options plasticised or unplasticised tubing or glass filled nylon
Technical Department) contact Norgren Technical service which conforms to the Collet: nickel plated brass
Operating pressure: Tube sizes: tolerances specified in BS 5409, ‘O’- ring: VMQ free NBR (FPM
Vacuum; 18 bar (261 psi) 1/8”, 5/32”, 3/16”, 1/4”, Part 1, 1976, light and normal duty, optional)
dependent upon operating 5/16”, 3/8”, 1/2” O/D DIN 73378, DIN 74234, Washer: plastic sealing
specification of tubing NFE 49-100 (parallel threads)
Vacuum: -750 mm of Hg i.e. 98% Thread sealant: Non-PTFE
Method of assembly
90˚
Components
3 1 Collet
2 Body
3 Tube stop
4 ‘O’-ring
4
2
Our policy is one of continued research and development. We therefore reserve the right to amend, 5/15
without notice, the specifications given in this document. (2012 - B9070d) © 2015 Norgren Ltd. RW/en 9.1.160.01
12 series (Pneufit)
Push-in fittings
Straight Straight Bulkhead Expanding Tube end expander/ Straight stem Plug Plug Stem tailpiece
connector connector connector 12023 reducer, tube stem connector 12004 13004 adaptor, O/D tube
Inch tube to O/D tube to O/D tube to to O/D tube 12022 stem to hose bore
MM tube O/D tube O/D tube 12023 12019
10020/12037 12020 12029
Our policy is one of continued research and development. We therefore reserve the right to amend,
RW/en 9.1.160.02 without notice, the specifications given in this document. (2012 - B9070d) © 2015 Norgren Ltd. 5/15
12 series (Pneufit)
Push-in fittings
øS
øA
øV
A O/D S T tubing V
tube stop
1/8" 0.09 0.53 0.26
5/32"(4) 0.11 0.55 0.3
3/16" 0.13 0.59 0.38
1/4" 0.17 0.61 0.42
5/16"(8) 0.24 0.65 0.51
3/8" 0.3 0.83 0.59
1/2" 0.38 0.96 0.71
Dimensions
C C
G G
øA
øA
B
B
Our policy is one of continued research and development. We therefore reserve the right to amend,
5/15 without notice, the specifications given in this document. (2012 - B9070d) © 2015 Norgren Ltd. RW/en 9.1.160.03
12 series (Pneufit)
Push-in fittings
øK
øA
(UNF thread)
øK
øA
B
C
G
O/D Model
Tube Thread
A B C G ØK
øA
B
1/8" M5 x 0.8 0.78 0.2 0.31 122250105
1 5/32" M5 x 0.8 0.84 0.2 0.35 102250405
3/16" M5 x 0.8 0.9 0.2 0.39 122250305
1/4" M5 x 0.8 0.94 0.2 0.43 122250405
O/D Model
Tube Thread
A B C G ØK
Stem adaptor 10415/12415
1/8" 10-32 UNF 0.79 0.2 0.31 3/32" 124250110
MM O/D stem to NPTF (male) thread
C
1/8" 1/16 NPT 0.8 0.37 3/8" 3/32" 124250116
G
1/8" 1/8 NPT 0.67 0.37 7/16" 3/32" 124250118
1/8" 1/4 NPT 0.95 0.56 9/16" 3/32" 124250128
øA
B
5/32" 10-32 UNF 0.85 0.2 0.35 3/32" 124250210
5/32" 1/8 NPT 0.89 0.37 7/16" 1/8" 124250218
øS
5/32" 1/4 NPT 1.04 0.56 9/16" 1/8" 124250228
3/16" 1/8 NPT 0.96 0.37 7/16" 5/32" 124250318
3/16" 1/4 NPT 1.04 0.56 9/16" 5/32" 124250328 O/D Model
1/4" 10-32 UNF 0.94 0.2 0.43 3/32" 124250410 Tube A Thread
mm B C G ØS
1/4" 1/8 NPT 0.98 0.37 7/16" 5/32" 124250418
4 1/8 NPT 1.25 0.37 0.08 7/16" 124150218
1/4" 1/4 NPT 1.11 0.56 9/16" 5/32" 124250428
4 1/4 NPT 1.44 0.56 0.08 9/16" 124150228
1/4" 3/8 NPT 1.07 0.56 11/16" 5/32" 124250438
5 1/8 NPT 1.31 0.37 0.13 7/16" 104150518
5/16" 1/8 NPT 1.12 0.37 1/2" 3/16" 124250518
5 1/4 NPT 1.5 0.56 0.13 9/16" 104150528
5/16" 1/4 NPT 1.23 0.56 9/16" 1/4" 124250528
6 1/8 NPT 1.33 0.37 0.16 7/16" 104150618
5/16" 3/8 NPT 1.13 0.56 11/16" 1/4" 124250538
6 1/4 NPT 1.52 0.56 0.16 9/16" 104150628
3/8" 1/8 NPT 1.32 0.37 11/16" 3/16" 124250618
8 1/8 NPT 1.37 0.37 0.2 7/16" 124150518
3/8" 1/4 NPT 1.47 0.56 11/16" 1/4" 124250628
8 1/4 NPT 1.56 0.56 0.2 9/16" 124150528
3/8" 3/8 NPT 1.41 0.56 11/16" 5/16" 124250638
10 1/4 NPT 1.74 0.56 0.3 9/16" 104151028
3/8" 1/2 NPT 1.45 0.75 7/8" 5/16" 124250648
10 3/8 NPT 1.81 0.56 0.3 11/16" 104151038
1/2" 1/4 NPT 1.67 0.56 7/8" 1/4" 124250728
12 3/8 NPT 1.95 0.56 0.36 11/16" 104151238
1/2" 3/8 NPT 1.63 0.56 7/8" 3/8" 124250738
12 1/2 NPT 2.15 0.75 0.36 7/8" 104151248
1/2" 1/2 NPT 1.7 0.75 7/8" 3/8" 124250748
øA
B
øS
Our policy is one of continued research and development. We therefore reserve the right to amend,
RW/en 9.1.160.04 without notice, the specifications given in this document. (2012 - B9070d) © 2015 Norgren Ltd. 5/15
12 series (Pneufit)
Push-in fittings
ø A1
øA
øK
øA
B
øS
O/D Model O/D O/D Model
Tube Thread Tube Tube
A B C G ØS A A1 C ØK
5/32" 10-32 UNF 1.14 0.2 0.08 5/16" 124150210 5/32" 4 mm 1.17 0.35 100200400
5/32" 1/8 NPT 1.25 0.37 0.08 7/16" 124150218 3/16" 5 mm 1.26 0.43 120370305
5/32" 1/4 NPT 1.45 0.56 0.08 9/16" 124150228 1/4" 6 mm 1.28 0.47 120370406
1/4" 1/8 NPT 1.33 0.37 0.16 7/16" 124150418 5/16" 8 mm 1.35 0.55 100200800
1/4" 1/4 NPT 1.52 0.56 0.16 9/16" 124150428 3/8" 10 mm 1.71 0.66 120370610
5/16" 1/8 NPT 1.37 0.37 0.19 7/16" 124150518 1/2" 12 mm 1.98 0.81 120370712
5/16" 1/4 NPT 1.56 0.56 0.19 9/16" 124150528
3/8" 1/4 NPT 1.74 0.56 0.3 9/16" 124150628 Bulkhead connector 12029
3/8" 3/8 NPT 1.82 0.56 0.3 11/16" 124150638 O/D tube to O/D tube C
1/2" 3/8 NPT 1.95 0.56 0.35 11/16" 124150738
1/2" 1/2 NPT 2.15 0.75 0.35 7/8" 124150748
øA
B
O/D tube to O/D tube
O P
C
O/D Model
Tube Thread
øA
øK
A B C O P
1/8" M10 x 1.0 1.15 0.47 0.20 0.55 120290100
5/32" M10 x 1.0 1.18 0.47 0.20 0.55 120290200
O/D Model 3/16" M12x 1.0 1.26 0.55 0.20 0.67 120290300
Tube
A C ØK 1/4" M14 x 1.5 1.38 0.59 0.24 0.75 120290400
1/8" 1.15 0.35 120200100 5/16" M16 x 1.5 1.42 0.63 0.24 0.87 120290500
5/32" 1.17 0.39 120200200 3/8" M20 x 1.5 1.69 0.55 0.28 1.06 120290600
3/16" 1.26 0.43 120200300 1/2" M24 x 1.5 1.97 0.59 0.28 1.18 120290700
øA
C
øB
øA
A B C ØK
1/8" 5/32" 1.22 0.35 120230201
1/8" 1/4" 1.3 0.35 120230401
O/D Stem Model 5/32" 1/4" 1.34 0.39 120230402
Tube O/D 5/32" 5/16" 1.22 0.39 120230502
A B C ØK
5/32" 3/8" 1.22 0.47 120230602
1/4" 1/8" 1.34 0.47 120230104 3/16" 1/4" 1.38 0.43 120230403
1/4" 5/32" 1.38 0.47 120230204 3/16" 5/16" 1.3 0.43 120230503
1/4" 3/16" 1.4 0.47 120230304 1/4" 5/16" 1.46 0.47 120230504
1/4" 3/8" 1.5 0.47 120230604
1/4" 1/2" 1.38 0.55 120230704
5/16" 3/8" 1.69 0.55 120230605
5/16" 1/2" 1.65 0.55 120230705
3/8" 1/2" 1.97 0.67 120230706
Our policy is one of continued research and development. We therefore reserve the right to amend,
5/15 without notice, the specifications given in this document. (2012 - B9070d) © 2015 Norgren Ltd. RW/en 9.1.160.05
12 series (Pneufit)
Push-in fittings
Straight stem connector 12022 Plug 12004 (Nickel plated brass) Dimensions in inch
Projection/First angle
C
C
øA
øS
øA
øK
O/D Model O/D Model
Tube Tube
A C ØS A C ØK
1/8" 1.18 0.09 120220100 1/8" 1.02 0.34 120040100
5/32" 1.19 0.13 120220200 5/32" 1.04 0.38 120040200
3/16" 1.31 0.16 120220300 3/16" 1.1 0.42 120040300
1/4" 1.34 0.24 120220400 1/4" 1.12 0.46 120040400
5/16" 1.42 0.3 120220500 5/16" 1.16 0.5 120040500
3/8" 1.77 0.38 120220600 3/8" 1.34 0.61 120040600
1/2" 2.05 0.45 120220700 1/2" 1.48 0.66 120040700
ø A1
øA
øS
øK
øA
O/D Model Nominal sizes Model
Tube Stem O/D tube Hose bore
A C ØK ØA Ø A1 C ØS
5/32" 1.04 0.38 130040200 1/8" 1/8” 1.34 0.07 120190101
3/16" 1.1 0.41 130040300 5/32" 1/8” 1.35 0.07 120190201
1/4" 1.12 0.46 130040400 1/4" 3/16” 1.43 0.11 120190403
5/16" 1.16 0.5 130040500 5/16" 1/4” 1.47 0.17 120190504
3/8" 1.34 0.61 130040600 3/8" 5/16” 1.70 0.22 120190605
1/2" 1.48 0.65 130040700 1/2" 3/8” 1.84 0.29 120190706
E
G
O/D Model
Tube Thread
A B C E G
1/8" R1/8 0.66 0.63 0.34 0.27 121450118
3/16" R1/8 0.72 0.65 0.34 0.27 121450318
1/4" R1/8 0.77 0.67 0.34 0.42 121450418
3/16" R1/4 0.78 0.8 0.44 0.38 121450328
Our policy is one of continued research and development. We therefore reserve the right to amend,
RW/en 9.1.160.06 without notice, the specifications given in this document. (2012 - B9070d) © 2015 Norgren Ltd. 5/15
12 series (Pneufit)
Push-in fittings
Fixed elbow adaptor 12445 Swivel male elbow 12447 Dimensions in inch
Projection/First angle
O/D tube to male NPTF thread O/D tube to male NPTF thread
C C
1
øA
øA
E
G
G
B
B
E
G
O/D Model
Tube Thread
A B C E G
1/8" R1/8 0.63 0.86 0.34 0.39 121470118
5/32" R1/8 0.66 0.81 0.3 0.39 101400418
3/16" R1/8 0.73 0.86 0.34 0.43 121470318
1/4" R1/8 0.77 0.88 0.34 0.43 121470418
5/16" R1/8 0.84 0.91 0.34 0.55 101470818
5/32" R1/4 0.66 0.95 0.44 0.55 101470428
3/16" R1/4 0.72 1.04 0.44 0.55 121470328
1/4" R1/4 0.77 0.99 0.44 0.55 121470428
5/16" R1/4 0.84 1.03 0.44 0.55 101470828
3/8" R1/4 1.05 1.13 0.44 0.67 121470628
1/2" R1/4 1.25 1.25 0.44 0.75 121470728
3/8" R3/8 1.05 1.2 0.5 0.67 121470638
3/8" R1/2 1.25 1.36 0.63 0.87 121470648
1/2" R3/8 1.05 1.35 0.5 0.87 121470738
1/2" R1/2 1.25 1.5 0.63 0.87 121470748
Our policy is one of continued research and development. We therefore reserve the right to amend,
5/15 without notice, the specifications given in this document. (2012 - B9070d) © 2015 Norgren Ltd. RW/en 9.1.160.07
12 series (Pneufit)
Push-in fittings
Extended swivel elbow adaptor 12454 Elbow connector 12040 Dimensions in inch
Projection/First angle
O/D tube to male NPTF thread C O/D tube to O/D tube
C
øA
øA
E
C
G
øA
B
øA
E
E
G
G
B B
Our policy is one of continued research and development. We therefore reserve the right to amend,
RW/en 9.1.160.08 without notice, the specifications given in this document. (2012 - B9070d) © 2015 Norgren Ltd. 5/15
12 series (Pneufit)
Push-in fittings
Swivel side tee adaptor, Swivel male side tee adaptor, Dimensions in inch
Projection/First angle
O/D tube to male taper BSP thread O/D tube to male taper NPTF thread
12168/10168 12468
E E
øA
øA
C
C
C1
C1
1 1
G
B B
Warning
These products are intended for use in industrial compressed air and rail The system designer is warned to consider the failure modes of all
transport systems only. Do not use these products where pressures and component parts used in fluid power systems and to provide adequate
temperatures can exceed those listed under safeguards to prevent personal injury or damage to equipment in the
»Technical features/data«. event of such failure.
Before using these products with fluids other than those specified, System designers must provide a warning to end users in the system
for non-industrial applications, life-support systems or other instructional manual if protection against a failure mode cannot be
applications not within published specifications, consult IMI NORGREN. adequately provided.
System designers and end users are cautioned to review specific
Through misuse, age, or malfunction, components used in fluid warnings found in instruction sheets packed and shipped with these
power systems can fail in various modes. products.
Our policy is one of continued research and development. We therefore reserve the right to amend,
5/15 without notice, the specifications given in this document. (2012 - B9070d) © 2015 Norgren Ltd. RW/en 9.1.160.09