Professional Documents
Culture Documents
TFAR
RT-1523G
General Keys
Keys Action
TS PTT * Direct Speak
CTRL + TAB Change the direct speech volume. Three different volumes are available;
Whispering, Normal or Yelling.
[Does not affect the signal volume in the radio transmission]
ALT + P Opens the long-range interface
CTRL + CAPS Lock Speak on default radio
CTRL + T Speak on secondary channel
NUM Pad 1-8 Switch between Long Wave radio channels
ESC Exit radio interface
*TeamSpeak Push To Talk – The button used to speak in TeamSpeak
4. To enter the frequency, highlight the existing frequency, using the keyboard, type in the desired frequency and
press the ENT button on the radio
5. Before programming the next frequency, consider routing signal to a particular ear. This makes it easier to
distinguish which frequency is being heard. To do this, cycle through the following options by clicking on ‘STO’
(bottom row, second button from the right)
a. Left
b. Right
c. Both ears
6. To set up the next frequency, choose CH 2. The onscreen NUM Pad must be used with the RT-1523G.
8. Before switching back to CH1, a secondary channel can be set up, allowing for the ability to speak on either pre-
programmed channel without opening the radio.
They are considered unique objects within the Arma 3 world. This feature allows one player to program a radio
and trade it with another player.
Radios can be taken from dead enemy bodies and reveal frequencies. During operations radios should be
stripped from dead bodies before being left behind.