Professional Documents
Culture Documents
MEP WORKS
Arab open University New Extension
Al Shorouq City, Egypt
BILL OF QUANTITIES
MEP WORKS
TABLE OF CONTENTS
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
COLLECTION:
VERTICAL TRANSPORTATION
Page 1
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
a-diameter 1.5" m 6
b-diameter 2.5" m 25
c-diameter 4" m 70
d-diameter 6" m 110
no 36
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
VALVES
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
2 Fire Hydrant
Wet Fire hydrant 6" with two outlet 2 1/2" x 4" pumper
complete with Non Rising stem (NRS) as per
specifications and drawings, UL listed & FM approved,
all other necessary accessories, components and
devices to make a complete job. no 5
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
Valves
1 4” Air Vent Valve with isolating valve (Gate valve)
including all accessories, fitting, valve champer
construction, and valve champer cover to make
complete job..and all components should be UL listed
and FM approved .
no 1
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
COLLECTION:
FIRE FIGHTING
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
a- 500 liter no 4
a- Diameter 20mm m 45
b- Diameter 25mm m 5
c- Diameter 63mm m 40
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
a- Diameter 20mm
m 360
b- Diameter 25mm
m 160
c- Diameter 32mm
m 55
d- Diameter 40mm
m 60
e- Diameter 50mm
m 20
f- Diameter 63mm
m 40
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
VALVES :
1 Supply, install and testing of AIR VALVE , according to
the provided drawings, the Egyptian code, the attached
technical specifications and the principles of industry
works
a- Diameter 25mm no 6
2 Supply, install and testing of CHECK VALVE ,
according to the provided drawings, the Egyptian code,
the attached technical specifications and the principles
of industry works .
a- Diameter 20mm no 4
b- Diameter 25mm no 12
c- Diameter 75mm no 2
3 Supply, install and testing of ISOLATED VALVE ,
according to the provided drawings, the Egyptian code,
the attached technical specifications and the principles
of industry works .
a- Diameter 20mm no 19
b- Diameter 25mm no 19
c- Diameter 32mm no 17
d- Diameter 40mm no 18
e- Diameter 50mm no 8
f- Diameter 75mm no 6
4 Supply, install and testing of BALANCE VALVE ,
according to the provided drawings, the Egyptian code,
the attached technical specifications and the principles
of industry works
a- Diameter 25mm
no 16
5 Supply,Install Test and commission WATER TAP in
Roof & Basement complete with all fittings, and all the
necessary items to complete the work according to the
principles of industry. no 6
6 Supply, install, test and commissioning circulation
Pump with flow rate 1 L/S and 20m head 2 (duty +
standby) complete with the following:-
1- Suction, discharge and non-return valves and all the
special couplings.
2- all electrical works from operation and control panel,
complete with control and alarm devices, and operating
cables from the panel to the pumps necessary to
complete work according to the drawing and the
technical consultant approval . item 2
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
DRAINAGE PIPES
a- Diameter 50mm
m 16
b- Diameter 75mm
m 32
c- Diameter 110mm
m 215
d- Diameter 160mm
m 10
3 Per Meter supply ,install, test and commission UPVC
for force main pipe (10 bar) from sump pit to slow down
chamber suspended or unsupended pipes complete ,
the price include all fittings ,fixing ,supports, flexiable
joints and necessary works,earthwork in excavation,
backfilling, sand bedding, fittings , and all the necessary
items to complete the work according to the principles
of industry.
a- Diameter 75mm
m 70
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
set 1
2 Domestic water network inside the pump room from
Galvanized steel pipe schedule 40 and suction piping
from main water network ( or municipality network ) to
underground water tank from HDPE and all pipes
complete with fittings, headers, valves, hangers,
supports,Puddle Flanges, etc. which required for the
specified operating condition in a neat workmanship. l.sum 1
l.sum 1
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
COLLECTION:
PLUMBING
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
General
1 Supply, installation, testing, adjusting, balancing,
commissioning and guarantee including operation,
maintenance, tools and spare parts as per the
specifications, and ASHRAE standards for the following
HVAC items:
The Contractor should read the BOQ with conjunction
specifications, schedules and detailed drawings to
control the price of each equipment.
All HVAC equipment shall complete with all control
valves and hook-up (for inlet and outlet standard
details).
a- ACC-01 , 200 TR no 2
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
a- Chemical Unit no 1
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
1 Air Handling units mixing box, Prefilter, bag filter, chilled water
cooling coil, and supply fan .
The unit shall be compatible with chilled water system and
complete with but not limited to : chilled water piping, filters,
electric power supply from the unit up to the nearest power
source and all other necessary accessories, components and
devices to make a complete job, considering the following:
a. Casing: the unit casing shall be double skin 50mm
thickness TB3 type at least. thermal break to be provided at all-
around doors and observation windows to prevent
condensation
b. Control: the unit shall be furnished with standalone
controller complete with its software. . The unit shall be factory
furnished with all opening required for instrumentation as
shown in the control diagrams.
c. Fan: Fans to be airfoil blades type and selected at high
efficiency point with less sound generation
d. The chilled water cooling coil shall be tested in terms of
cooling performance as per AHRI.
e. Drift eliminator at the downstream of cooling coil to be
provided for carring over prevention in case the face velocity
on the coil is more than 2.5 m/s.
f. Power transmission: the motor to be furnished with two V-
belt at least and variable pitch pulley. the maximum speed
ratio is 1:1.5
Note: Additional one filter set to be considered after handing
over, Moreover, the cooling coil shall be between 4 to 6 rows .
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
2 Duct Insulation
a- Insulation for indoor air ducts ( 25 mm thickness ) ,
as per ASHRAE 90.1, comply to specifications and
complete with all accessories. m2 2500.0
b- Insulation for outdoor air ducts ( 50 mm thickness ) ,
as per ASHRAE 90.1, comply to specifications and
complete with all accessories. m2 280
c- Insulation for blacksteel ducts ( 50 mm thickness ) ,
as per ASHRAE 90.1, comply to specifications and
complete with all accessories. m2 100
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)
a- MFSD 150X150 no 4
b- MFSD 600X200 no 2
Rate Amount
Item Description Unit Qty.
(EGP) (EGP)