Professional Documents
Culture Documents
Sikasil®-111 Multipurpose
MULTIPURPOSE NEUTRAL CURING SILICONE SEALANT
USES
Sikasil®-111 Multipurpose provides weatherproof
joints between various substrates such as glass,
metals, painted surfaces, wood and ceramic tiles.
PRODUCT INFORMATION
Chemical Base One component neutral curing silicone
Packaging 300 ml
Appearance / Colour Paste / Clear, Black, White, Grey
Shelf Life 12 months from the date of production, if it is stored in undamaged,
original, sealed packaging, and if the storage conditions are meet.
Storage Conditions Stored in cool and dry conditions, where it is protected from direct
sunlight and at temperatures below +25 °C.
Density ~1.48 g/cm3 (at +23 ± 2 oC, 50% RH) (GB/T 13477)
TECHNICAL INFORMATION
Shore A Hardness 45 (GB/T 531)
1/3
o
Tensile Modulus 0.63 Mpa (at 23 C) (GB/T 13477)
Elongation at Break 297 % (GB/T 13477)
Tensile Strength Under Standard 0.83 Mpa (GB/T 13477)
Condition
Extrusion 234 ml/min. (GB/T 13477)
Movement Capability 35 % (GB/T 13477)
Slumpability Vertical not change shape (GB/T 13477)
Slumpability Horizontal 0 mm (GB/T 13477)
Joint Design The joint width must be designed to be within the movement capability of
the sealant. In general the joint width must be > 6 mm and < 12 mm. The
width to depth ration of ~ 2 : 1 must be respected.
Joint Width 6 mm 9 mm 12 mm
Joint depth 4 mm 5 mm 6 mm
Joint Length / 300 ml ~ 12.5 m ~ 6.5 m ~4m
APPLICATION INFORMATION
Tack Free Time ~40 minutes approx (+23°C / 50% r.h.) (GB/T 13477)
Curing Speed 3 mm/ day approx. (+23°C / 50% r.h.)
Ambient Air Temperature +5°C min. / +40°C max
Substrate Temperature +5°C min. / +40°C max
APPLICATION INSTRUCTIONS
APPLICATION METHOD / TOOLS
Sikasil®-111 Multipurpose is supplied ready to use. or abrasion are likely to occur. It is also not
After suitable joint and substrate preparation and recommended for structural glazing or insulated
properly cleaned substrate, for better appearance glazing and food contact applications.
cover outside of joint areas with masking tapes before ▪ Sikasil®-111 Multipurpose is not suitable for medical
application. Cut nozzle to desired size and extrudes or pharmaceutical uses.
sealant to joint areas. The sealant is gunned into place
and tooled within 5 minutes, using a spatula and suitable BASIS OF PRODUCT DATA
smoothing liquid. Masking tape is then removed
immediately. Uncured material can be removed by All technical data stated in this Product Data
using a suitable solvent or an approved sealant Sheet are based on laboratory tests. Actual
remover and cured material can only be removed measured data may vary due to circumstances
mechanically. beyond our control.
2/3
LEGAL NOTES
The information, and, in particular, the
recommendations relating to the application and end-
use of Sika products, are given in good faith based on
Sika's current knowledge and experience of the
products when properly stored, handled and applied
under normal conditions in accordance with Sika's
recommendations. In practice, the differences in
materials, substrates and actual site conditions are
such that no warranty in respect of merchantability or
of fitness for a particular purpose, nor any liability
arising out of any legal relationship whatsoever, can be
inferred either from this information, or from any
written recommendations, or from any other advice
offered. The user of the product must test the
product’s suitability for the intended application and
purpose. Sika re- serves the right to change the
properties of its products. The proprietary rights of
third parties must be observed. All orders are accepted
subject to our current terms of sale and delivery. Users
must always refer to the most recent issue of the local
Product Data Sheet for the product concerned, copies
of which will be supplied on request.
3/3