Professional Documents
Culture Documents
www.lucyelectric.com
Power distribution
and automation
product portfolio
Specialising in high-performance
switchgear, we develop and
supply intelligent solutions and
services for utility, industrial and
commercial applications.
Page 2
Contents
Applications 4
Automation 22
Gemini 3 23
Gemini 2.5 RTU 24
Gemini SCADA solutions 25
Energy Services 40
Page 3
Range capability guide
F
Applications
Energy
i) Generation: wind power, solar power
Infrastructure
i) Tunnels, airports, ports,
metro railway stations
J
Buildings
i) Commercial buildings: hospitals,
shopping centers, hotels, office buildings,
data centers, warehouses, schools
Industries
L
M
N
Q
Ring main units Switch disconnectors Automation Distribution cabinets Cut outs
B
Sabre F Rapier DSB L
MSDB Integrated CT metering
N and heavy duty cut out
C
Trident G Rapier GX
O Pole mounted cut out
D
Scimitar H Isolating links
P ABC distribution box
I Dropout (Expulsion) fuses
Q House service cut outs
Page 4
H
O I G
P
J
B
Page 5
Medium voltage
Page 6
Range table - Ring main units and metering units
Metering units
Page 7
Medium voltage - Ring main units
Page 8
Medium voltage - Ring main units
Sabre
SF6 insulated with
vacuum circuit breaker
protection
Lateral and rear cable termination, SF6 gas insulated RMU, fully weather
proof with IP54 for outdoor applications.
Technical Data
Rated voltage kV 12 17.5 15.5 24
Range Extensibility
Product range Description Non extensible Left hand extensible Right hand extensible Both ways extensible
Page 9
Medium voltage - Ring main units
Trident
Oil insulated with
fuse protection
Lateral and rear cable termination, oil insulated ring main unit
designed for harsh and corrosive environmental conditions.
Range Extensibility
Product range Description Non extensible Left hand extensible Right hand extensible Both ways extensible
Page 10
Medium voltage - Ring main units
Scimitar
SF6 insulated with
fuse protection
Lateral and rear cable termination, SF6 gas insulated ring main unit,
fully weather proof with IP54 for outdoor applications.
Range Extensibility
Product range Description Non extensible Left hand extensible Right hand extensible Both ways extensible
Page 11
Medium voltage - Metering units
Range Connection
Product range Description RMU tee off metering Bus bars metering
Air metering unit 250 / 400 / 630A air insulated metering unit 3 3
Page 12
Medium voltage - Metering units
Range Connection
Product range Description RMU tee off metering Bus bars metering
Oil metering unit 250 / 400 / 630A air insulated metering unit 3 3
Page 13
High / Medium voltage
Switch disconnectors
Lucy Electric’s range of high and medium
voltage switch disconnectors include
pole or structure mounted air break
disconnectors and air and gas load
break switches.
Page 14
Range table - Switch disconnectors
Switch Rated
voltage
Mode of
fault current
Insulation
medium
Rated
current
Mounting Installation
condition
Operation
Rapier Local /
36kV – Air 800A Pole Outdoor 16
AX Remote
Rapier Local /
145kV – Air 2500A Structure Outdoor 17
DSB Remote
Rapier Local /
38kV – SF6 630A Pole Outdoor 18
GX Remote
Isolating
36kV – Air 400A Pole Outdoor Local 19
links
Dropout
36kV Fuse Air 100A Pole Outdoor Local 20
fuses
Page 15
High / Medium voltage - Switch disconnectors
Rapier AX
Air break
switch disconnector
Characteristics
• 12 / 15.5 / 24 / 36kV options
• Lightweight, universal base design for all voltages
• Horizontal or vertical mounting on standard
steelwork both pole top and underline
• Fully type tested and compliant with IEC,
ENATS and other standards
• Silicon insulators
• Dependent Manual (DM) and Independent Manual Spring (IMS)
assisted hookstick mechanism, and down pole handle variants
• AX can be supplied with full remote control for automation
(AX-A) or the automation can be retrofitted at a later date
• Optional load break capabilities
• Optional earth blades
• Can be fitted with expulsion fuses (vertical mounting only)
• Enhanced dielectric values
Technical Data
Rated voltage kV 12 15.5 24 36
Load break current A 630 (800) 630 (800) 630 (800) 800
Page 16
High / Medium voltage - Switch disconnectors
Rapier DSB
Double side break
switch disconnector
Characteristics
• Ratings up to 145kV and 2500A
• Robust design
• High endurance and reliability
• Suitable for horizontal and vertical installation
• Fault withstand current up to 40kA / 3sec
• Double side break
• Optional integral earth blades either or both sides
• Manual or motor operation
Accessories
Busbar connectors:
• Up to 145kV
• Fixed and expansion type
• Available in copper and aluminium
Technical Data
Rated voltage kV 36 72 145
Key interlocks 6 6 6
Page 17
High / Medium voltage - Switch disconnectors
Rapier GX
Enclosed load break switch
Technical Data
Rated voltage kV 15 26 38
Page 18
High / Medium voltage - Switch disconnectors
Isolating links
Technical Data
Rated voltage kV 12 36
Page 19
High / Medium voltage - Switch disconnectors
Dropout
(expulsion) fuses
Characteristics
• Fuse assembly with rewirable fuselink
• Hookstick operation
• Visual indication from ground level of blown fuse
• Porcelain or polymeric insulators
Technical Details
• Button type fuselink up to 100A
• Available in 12, 24 and 36kV versions
• Spring loaded flipper ensures constant contact pressure
• Optional trip all phase (TAP) three phase unit
Page 20
Page 21
Automation
Gemini RTU
Lucy Electric’s complete range of
automated power distribution products
gives customers a choice of automation
building blocks which can be tailored to
offer a complete smart grid solution.
Page 22
Automation
Gemini 3
Modular RTU
The Gemini 3 is a highly flexible and modular Input Output Module (IOM) – General purpose module that
general-purpose Remote Terminal Unit (RTU) covers digital and analogue inputs and relay outputs.
designed to remotely monitor and control Fault Passage Module (FPM) – Dual fault passage indicator
medium / high voltage switchgear. module which detects and alarms for Overcurrent and Earth Faults.
The RTU has a modular design such that it can be Human to Machine Interface (HMI) – An optional module
configured from a simple monitoring only device that allows local control and monitoring without the need for a
computer. An LCD screen displays site information and can be
to a sophisticated HV multi switch controller. The
customised by the user.
ability to plug in additional modules allows for
future requirements to be met and, if required,
new modules can be developed at a later data. General features:
This ensures a future proof design that can • Fault detection (Earth and Phase)
evolve with ever changing customer needs.
• LED status indicators
• Real time clock (SCADA synchronised)
There are several modules currently available in the Gemini 3 RTU:
• Dual isolated Ethernet and RS232 ports
Master Control Module (MCM) – Contains the main
• Supervisory selection and indication
processor and supervises all modules. The MCM handles
the communication protocols. • USB and HMI ports
• Event memory – 6500 events in non-volatile memory
Switch Control Module (SCM) – Provides the inputs and outputs
• Optional flash SD memory card (factory fitted)
to perform secure controls. This allows one switch to be controlled
but additional modules can be added to increase the number of
controlled switches.
Page 23
Automation
• Inbuilt Earth and fault passage indicators • Advanced battery back to operate under mains AC input failure
• Advanced monitoring of current, voltage, battery • Fully tested to ENATS (Energy Network Association
condition, temperature compensation, switching Technical Standards), EMC and environmental standards
status, automatic cooling system and gas pressure
Technical Data
General Communications
Enclosure Stainless steel 3 RS-232 for control (Ethernet option), configuration and
Communication interfaces
programming plus one expansion bus
Degree of protection IP54
DNP3, IEC 60870-5-101 / 104 and Modbus (others
Operating temperature -25 to +60 °C Protocols
on request)
Relative humidity Up to 95% R S-232 / 485, UHF / VHF radio, packet data, GSM /
Method of mounting Floor, wall, pole or RMU switchgear Communication media GPRS / EDGE, PTSN, leased or twisted pair lines, optical
fibre, Ethernet (TCP / IP) and Bluetooth
Dimensions H 600, W 400, D 210mm
Processor module ARM9 Microprocessor •M embrane push-button for open / close operations in
conjunction with activate push-button for up to four
110 / 230V AC supply – over and
Power supply Controls switching functions (standard 1, 2, 3 or 4 switch
under-voltage protection
control formats)
Battery type 2 x 12V DC, sealed lead acid or high temperature NiMH • Selector control for off, local or remote modes
Battery charger Temperature compensated, fully protected • R TU services such as DC / AC supplies, dummy control
and debug LEDs
Control electronics PIC based processor with expandable I2C bus Indications • Switch status LEDs for open / closed positions
Inner enclosure Stainless steel • Control output LEDs (illuminates when active)
• Configurable LED indications
Microprocessor controlled, long life fan with baffle air
Ventilation Cables Plug-in, multi-core umbilicals to switchgear
intake filter
Digital inputs 14 isolated digital inputs – expandable Windows-based software for configuration of:
• Protocol parameters including device and
Digital outputs 8 isolated digital outputs – expandable
I / O addresses
3 CT analogue inputs as standard • Parameters for the communications device
Analogue inputs Configuration
(DIs reduced to 11) • Parameters for digital, analogue and counter points
• Automation sequences
Expansion I / O module 3 AIs / 4 DIs; 7 DIs / 2 DOs • Power saving routines
• Battery tests
Page 24
Automation
Gemini SCADA
solutions
Page 25
Low Voltage
Distribution cabinets
The comprehensive product portfolio
includes wall, ground and transformer
mounting cabinets suitable for a variety
of different applications. The TMO cabinet
features the enhanced safety Aculock
fuse handle.
Page 26
Range table - Distribution cabinets
Distribution Rated
voltage
Busbar
rated
Protection Fuse
type
Number of
outgoing
Mounting Installation
AcuLok Transformer
400V 1600A Fuse / ACB BS88 J Up to 6 mounted / Outdoor 28
TMO ground
MSDB Wall /
Multi service 400V 500A Fuse BS88 J Up to 45 Indoor 29
ground
distribution boards
SMDB
Sub mains 400V 500A Fuse BS88 Up to 5 Wall Indoor 30
distribution boards
Page 27
Low voltage - Distribution cabinets
AcuLok TMO
Transformer distribution cabinet
Page 28
Low voltage - Distribution cabinets
Multi service
distribution boards
(MSDB)
Page 29
Low voltage - Distribution cabinets
Sub mains
distribution boards
(SMDB)
Page 30
Page 31
Low voltage
Cut outs
Providing a robust and durable solution
for the vast majority of LV protection
and distribution requirements up
to 630A, the cut out range has kept
abreast of market demands in terms
of performance and versatility.
Page 32
Range table - Cut outs
230 /
Heavy duty 400V
630A Fuse BS88 J Three phase Wall Indoor 34
Integrated
CT metering 400V 630A Fuse – Three phase Wall Indoor 35
& heavy duty cut out
Pole
400V 400A Fuse BS88 J Single Pole Outdoor 36
mounted
ABC Up to 9
230 /
distribution 400V
200A – – outgoing Wall or Pole Outdoor 37
unfused ways
boxes
Indoor
230 / Single /
house 400V
100A Fuse BS1361
Three phase
Wall Indoor 38
service
Outdoor
230 / Single /
house 400V
100A Fuse BS1361
Three phase
Wall Outdoor 39
service
Page 33
Low voltage - Cut outs
Heavy duty
cut outs
Page 34
Low voltage - Cut outs
Integrated
CT metering
& heavy duty cut outs
• Suitable for 3C CNE or 4C SNE installations CT ratios 200 / 5, 400 / 5 and 600 / 5
mounted on pre-drilled backboard CT conformity IEC 60044-1, 1357626 and IEC 185
Page 35
Low voltage - Cut outs
Pole mounted
cut outs
Page 36
Low voltage - Cut outs
ABC distribution
boxes
Page 37
Low voltage - Cut outs
Indoor
house service
cut outs
Page 38
Low voltage - Cut outs
Outdoor
house service
cut outs
Page 39
Complete product lifecycle solutions
Our aim at Lucy Electric is to ensure that
you consistently get the very best from our
technology – and your budgets. With our
integrated set of product lifecycle services,
ranging from after sales support to training
and consultancy, we provide incisive
expertise and timely assistance throughout
the lifecycle of your high performance Lucy
Electric products.
Page 40
Complete product
lifecycle solutions
1. Installation and commissioning
B. Connections
C. Commissioning
C. Maintenance scheduling
4. Consultancy
A. Consultancy for extension, upgrades and retrofitting of switchgear to maximise asset performance
and avoid unexpected failures and production losses
5. Testing
F. RTU testing
G. FPI testing
6. Training
A. Tailor made courses for supervisors, engineers, technicians, operators, programmers and
maintenance teams
7. Retrofitting
8. De-commissioning
Page 41
Lucy Electric worldwide offices
Lucy Electric Ltd. Lucy Switchgear Arabia Co. Ltd. Lucy Asia Pacific Sdn Bhd
Howland Road, Thame, Oxfordshire, Novotel Business Centre, L13A-03-03A, PJX-HM Shah Tower,
OX9 3UJ, United Kingdom P.O. Box 35340, Dammam 31488, No16A Jalan Persiaran Barat,
Tel: +44 1844 267 267 General Saudi Arabia 46050 Petaling Jaya, Selangor, Malaysia
Tel: +44 1844 267 222 Sales Tel: +966 138 147 910 Tel: +603 74910700
Fax: +44 1844 267 223 Fax: +966 138 147 914 Fax: +603 79316923
Email: salesuk@lucyelectric.com Email: salessa@lucyelectric.com Email: salesmy@lucyelectric.com
Lucy Middle East FZE Lucy Electric South Africa (Pty) Ltd. Lucy Electric (Beijing) Co. Ltd.
PO Box 17335, Jebel Ali, Dubai, Unit 2, Cranberry Industrial 卢西电器(北京)有限公司
United Arab Emirates Park, Cranberry Street, 北京市朝阳区东三环北路霞光里
Tel: +97 148 129 999 Laser Park, Honeydew, 2170, South Africa 18号佳程广场A座1122室
Fax: +97 148 129 900 Tel: +27 11 025 7490 邮编: 100027
Email: salesme@lucyelectric.com Fax: +27 11 794 3277 电话: +86 1059 231 176
Email: salesza@lucyelectric.com 传真: +86 1059 231 177
Lucy Electric (Thailand) Ltd. 电子邮件: salescn@lucyelectric.com
500/64 Moo 3 Tasith, Pluak Daeng, Postal Address:
Rayong, 21140, Thailand P.O. Box 1078, Honeydew, 2040
Tel: +66 (0)33 684 333
Email: salesth@lucyelectric.com
LEPDA0215