Professional Documents
Culture Documents
com 4ANK 6ENTS
High quality,
tough vents for
any operating
condition.
Standard Vents
Filtered Vents
Heavy equipment typically operates
Filtered Vents
Features:
l Suitable for flat or round top fuel tanks.
AUS25A Vent Shown AUS25A-A-L Vent Shown AUS25B Vent Shown AUS25C Vent
Features:
l Suitable for flat or round top fuel tanks. l Vapour relief pressure approximately: 110 kPa (Red cap) and 49kPa (Green cap). l 3/4”
l “A” Series has 2” NPT male taper threads. l “B” Series has either 8 tpi or 12 tpi, tamper proof lockable flanges. l CAT and Koma
t Shown AUS25D Vent Shown AUS25E Vent Shown AUS25R Vent Shown
4” breather pipe. l 1/16” bleed hole. l Splash tube (except on Rail spec vents).
atsu compatible. l ‘O’ Ring seals provide reliable & extended service.
l Used to position “A, C, E and R” series vents onto the topmost point of the fuel tank.
l Used in conjunction with vents, it creates the correct “Ullage” or air gap in the tank
to allow the system to work correctly.
AUS25AA-1 Vent Half Coupling
4ANK 6ENTS
www.banlaw.com
Vent cap colour indicates relief pressure setting: n 110kPa - (15.7psi) n 49kPa - (7psi)
*Note: AUS25E Series Vents supplied only with Gold coloured steel caps
Please Note: Use only Banlaw factory replacement parts. Failure to do so may cause equipment failure or malfunction, vehicle damage and invalidate factory warranty.
4ANK 6ENTS
2E&UELLING .OZZLES