Professional Documents
Culture Documents
Electronics >Schematic diagrams >Guitar effects > Boss CE-2 chorus effect pedal schematic
Specifications:
The circuit is designed around the MN3007 1024 stage BBD (IC3) and the
MN3101 clock driver (IC4). The input and output circuits use a uPC4558C IC
while the LFO is made with the help of a TL022LP op-amp IC.
Adjustment procedure:
Turn the Rate knob fully counterclockwise (min.) and the Depth knob fully
clockwise (max.). Feed a 200Hz, +3dBm sine signal into the input. Connect an
oscilloscope to the emitter of Q3 and turn VR3 until you'll get a centered
operating point (a symmetrical sine wave, equally clipped at top and bottom).
file:///C:/Users/Noli/Documents/Manuales/ARTICULOS%20TECNICOS/Boss%20C... 01/03/2013
Boss CE-2 chorus pedal schematic diagram Página 2 de 2
CE-2B Bass Chorus Boss OD-1 Overdrive CS-2 Compression Sustainer Boss NF-1 Noise Gate
Arion SCH-1 Chorus Boss OD-2 Turbo OverDrive Boss DM-2 Analog Delay Boss GE-7 Equalizer
Pearl CH-02 Chorus Boss SD-1 Super Overdrive Boss DD-2 Digital Delay Boss GE-7B Bass Equalizer
Boss BF-2 Flanger Boss MT-2 Metal Zone Boss OC-2 Octave Boss TR-2 Tremolo
Pearl FG-01 Flanger Boss HM-2 Heavy Metal
Search
Search
Electronics >Schematic diagrams >Guitar effects > Boss CE-2 chorus pedal schematic
file:///C:/Users/Noli/Documents/Manuales/ARTICULOS%20TECNICOS/Boss%20C... 01/03/2013