Professional Documents
Culture Documents
MY TEST
MY PROFILE
REPORTS
Ask an Expert
Q. Question Status
No
Q.1 Choose the best alternative which can be substituted for the given
sentence:
“Meaningless language with an exaggerated style intended to impress”.
a. oratory
b. public speaking
c. verbalization
d. rhetoric
Q.2 A sentence has been broken into 3 parts labeled as ‘a’, ‘b’, ‘c’. The fourth
option ‘d’ is to be used in case there is no error in part ‘a’, ‘b’ or ‘c’.
Q.3 In this question, out of the four alternatives, choose the option which is
closest in meaning to VOCIFEROUS.
1 of 17 26-12-2015 02:39
MADE EASY ONLINE TEST SERIES http://s1.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
a. violet
b. loud
c. true
d. secret
Q.4 Given four numbers N1 = 2600; N2 = 3500; N3 = 4400 and N4 = 5300. Which
pair of numbers has minimum difference in the number of digits?
a. N1 and N2
b. N2 and N3
c. N3 and N4
d. N4 and N1
Q.5 Triangles ABC and CDE have a common vertex C with side AB of triangle
ABC being parallel to side DE of triangle CDE. If length of side AB = 2 cm
and length of side DE = 7 cm and perpendicular distance between sides
AB and DE is 7.2 cm, then find the sum of areas of triangle ABC and
triangle CDE.
Attempt Incorrect Your Ans. 576 Correct Ans. 21.2 (21 - 21.5)
Video Solution FAQ? Have any doubt? Solution
Q.6 In this question, two statements are given followed by two conclusions
marked C1 and C2. You have to consider the statements to be true even if
they seem to be different from commonly known facts. You have to
identify which of the given conclusions follow from the given statements.
Statements:
S1: Temple is a place of worship.
S2: Mosque is also a place of worship.
Conclusions:
C1: Hindus and muslims use the same place of worship.
C2: All mosques are temples.
. Which of the
2 of 17 26-12-2015 02:39
MADE EASY ONLINE TEST SERIES http://s1.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
following is true?
Q.8 Jagan’s car gives 3 km more per liter of petrol when driven on the
highway in comparison to city drive. On a recent trip, Jagan drove 42 km
on the highway and 77 km in the city consuming a total of 10 liters of
petrol in the process. How many km/liter does Jagan’s car run in the city?
a. 11 km/liter
b. 12 km/Liter
c. 14 km/liter
d. 9 km/Liter
Q.9 Based on the given statements, select the most appropriate option to
solve the question.
Agam wants to sell his magic box at either a profit of K% or a loss of K%.
What is the value of K?
Statement 1: Difference between the amount Agam gets in the 2 cases is
Rs 1280.
Statement 2: If Agam’s profit is Rs K, his profit in percentage is 2.5%.
Q.10 In a set of first 500 odd natural numbers, how many numbers are divisible
by 3 or 5?
a. 2 × 105 N/mm2
3 of 17 26-12-2015 02:39
MADE EASY ONLINE TEST SERIES http://s1.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
b. 3 × 105 N/mm2
c. 4 × 105 N/mm2
d. 6 × 105 N/mm2
Q.12 A thin high strength steel plate 4 mm thick and 1000 mm long is bent by
couples Mo into a circular arc which subtends a central angle of 45°. The
maximum bending stress in the plate is
[Take E = 2 × 105 N/mm 2].
a. 120.14 N/mm2
b. 214.16 N/mm2
c. 314.16 N/mm2
d. 620.14 N/mm2
a. ML–1
b. L2T –1
c. ML–1T –1
d. MT –2
a. Engine A
b. Engine B
c. Engine C
d. All engines have same efficiency
4 of 17 26-12-2015 02:39
MADE EASY ONLINE TEST SERIES http://s1.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
Q.16 A cross flow type air heater has an area of 50 m 2. The overall heat transfer
coefficient is 100 W/m 2K and heat capacity of both hot and cold stream is
1000 W/K. The value of NTU is
a. 1000
b. 500
c. 5
d. 0.5
Q.18 A standard gear has outside diameter of 96 mm and module 3 mm. The
number of teeth on the gear is
a. 32
b. 30
c. 16
d. 15
Q.19 A carbide tool (having n = 0.25) with a mild steel workpiece was found to
given life of 1 hour 21 minutes while cutting at 60 m/min. The value of c in
Taylor’s tool life equation VTn = c would be equal to :
a. 200
b. 180
c. 150
d. 100
5 of 17 26-12-2015 02:39
MADE EASY ONLINE TEST SERIES http://s1.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
a. Tachometer
b. Comparator
c. Dynamometer
d. Lactometer
Q.21 Consider atomic Packing Factor (APF) of the following crystal structures :
i. Body centered cubic
ii. Face centred cubic
iii. Diamond
iv. Hexagonal closed packed structure
Which of the above structures have equal Atomic Packing Factor (AFP) ?
a. i and iii
b. ii and iv
c. iii and iv
d. ii, iii and iv
a. 1.2
b. 1.3
c. 1.4
d. 1.5
Q.23 In a maintenance shop, jobs come at an average rate of 15 per day. The
inter arrival time follows an exponential distribution and the service time
distribution is also exponential with an average of 48 minutes. The queue
length is
a. No job in queue
b. 1 Job
c. 0.5 Job
d. 2 Job
6 of 17 26-12-2015 02:39
MADE EASY ONLINE TEST SERIES http://s1.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
a.
b.
c.
d.
Q.26 The degree of freedom for the mechanism shown in the figure is
_____________.
7 of 17 26-12-2015 02:39
MADE EASY ONLINE TEST SERIES http://s1.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
Q.28 A mass of 0.8 kg of air at 1 bar and 25°C is contained in a gas tight
frictionless piston cylinder device. The air is now compressed to a final
pressure of 5 bar. During the process, the heat is transferred from air such
that the temperature inside the cylinder remains constant. Then the work
done during the process is _____________ kJ.
Q.29 In a certain chemical process, oil at 35°C flows over a flat plate whose
temperature is maintained at 95°C. The thickness of thermal boundary
layer is _____________ mm.
Assume : h = 8.473 W/m 2K
α = 7.2 × 10–8 m 2/s
ν = 0.65 × 10–4 m 2/s
Velocity boundary layer thickness (δ) = 0.4031 m
Attempt Incorrect Your Ans. 1.2 Correct Ans. 40.74 (39 - 41)
Video Solution FAQ? Have any doubt? Solution
Q.30 The humidity ratio of atmospheric air at 28°C DBT and 760 mm of Hg
atmospheric pressure is 0.016 kg of vapour per kg of dry air. The partial
pressure of water vapour is _____________ kPa.
Q.31 The sale of a product during last five years is tabulated below :
Assuming simple average method, the sale in the current year (2015)
shall be _________ units.
Q.32 A cantilever 3 m long carries uniformly distributed load over the entire
length. If the slope at the free end is 1°, the deflection at the free end is
_________ mm.
Attempt Incorrect Your Ans. 2.25 Correct Ans. 39.26 (37 - 42)
Video Solution FAQ? Have any doubt? Solution
Q.33 A solid shaft can resist a bending moment of 12 kNm and a twisting
8 of 17 26-12-2015 02:39
MADE EASY ONLINE TEST SERIES http://s1.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
moment of 5 kNm together, then the maximum torque that can be applied
is ______________ kN-m.
Q.35 If the function f(x) = ex is defined in the range [0, 1], then the value of c of
the mean value theorem is approximately_______.
Q.36 A beam of triangular cross section having base width of 100 mm and
height of 150 mm is subjected to a shear force of 13.5 kN. The value of the
maximum shear stress is
a. 1.8 MPa
b. 2.7 MPa
c. 5.4 MPa
d. 9.6 MPa
Q.37 A turbine develops 500 kW power under a head of 100 meters at 200 rpm.
Its normal speed and output under a head of 81 m will be
Q.38 At time t = 0, water depth in the tank is 30 cm. The time required to fill the
remaining tank is
9 of 17 26-12-2015 02:39
MADE EASY ONLINE TEST SERIES http://s1.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
a. 45.57 sec
b. 54.25 sec
c. 60.98 sec
d. 74.12 sec
Q.39 What is the value of shape factor F12 in a cylindrical cavity of diameter ‘d ’
and height ‘h’ between bottom face known as surface 1 and top flat
surface known as surface 2 ?
a.
b.
c.
d.
Q.40 A diesel engine has a compression ratio of 17 and cut-off takes place at
10% of the stroke. Assuming ratio of specific heats(γ) as 1.4, the air
standard efficiency is
a. 59.6%
b. 52.5%
c. 47.3%
10 of 17 26-12-2015 02:39
MADE EASY ONLINE TEST SERIES http://s1.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
d. 54.7%
a. 0.63
b. 1.83
c. 1.26
d. 0.47
Q.42 A turbine operating on air has inlet condition of 10 bar, 750 K and 200 m/s,
while exit conditions are 1.25 bar and 40 m/s. The mass flow rate of air is
1000 kg/hr. The flow of air is assumed to be reversible adiabatic. Then the
power output of the turbine is
[Assume Cp = 1.053 kJ/kgK and adiabatic index = 1.375]
a. 100.3 kW
b. 100.3 W
c. 58.6 kW
d. 77.8 W
a. 11 days
b. 13 days
c. 16 days
d. 23 days
Q.44 Consider a linear programming problem with two variable and two
constraints. The objective function is maximize x1+ x2. The corner points
of the feasible region are (0, 0), (0, 2) (2, 0) and (4/3, 4/3)
If an additional constraint x 1 + x2 < 5 is added, the optimal solution is
11 of 17 26-12-2015 02:39
MADE EASY ONLINE TEST SERIES http://s1.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
a. (5/3, 5/3)
b. (4/3, 4/3)
c. (5/2, 5/2)
d. (5, 0)
a. 10 rad/s
b. 1.83 Hz
c. 7.746 rad/s
d. 10.95 rad/s
Q.46 Match List-I with List-II and select the correct answer using the codes
given below the lists:
List-I List-II
Codes:
A B C D
(a) 4 1 3 2
(b) 2 4 3 1
(c) 3 4 1 2
(d) 3 2 1 4
a. a
b. b
c. c
d. d
a.
12 of 17 26-12-2015 02:39
MADE EASY ONLINE TEST SERIES http://s1.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
b.
c.
d.
a. 1, 2 and 3
b. 1 and 3 only
c. 2 and 3 only
d. 2 only
a. 2 min
b. 2.4 min
c. 3.2 min
d. 3.9 min
a.
b.
c.
d.
13 of 17 26-12-2015 02:39
MADE EASY ONLINE TEST SERIES http://s1.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
The value of is
a. log (α)
b. log (α + 1)
c. xα
d.
Q.52 Air enters a gas turbine at 1.0135 MPa, 1000 K at the rate of 1 kg/s and exit
at 101.35 kPa and 600 K. Neglect the changes in potential energy and
kinetic energy and assume that air is a ideal gas with R = 287 J/kg-K, Cp =
1.005 kJ/kgK. The isotropic efficiency of the turbine is __________ %.
Q.53 For a heat pump working on vapour compression cycle, enthalpy values
of the working fluid at the end of heat addition process, at the end of
compression process, at the end of heat rejection process, and at the end
of iso-enthalpic expansion process are 195 kJ/kg, 210 kJ/kg, 90 kJ/kg and
90 kJ/kg respectively. The mass flow rate is 0.5 kg/s. Then, the heating
capacity of heat pump is ______ kW.
Q.54 For a heat pump working on vapour compression cycle, enthalpy values
of the working fluid at the end of heat addition process, at the end of
compression process, at the end of heat rejection process, and at the end
of iso-enthalpic expansion process are 195 kJ/kg, 210 kJ/kg, 90 kJ/kg and
90 kJ/kg respectively. The mass flow rate is 0.5 kg/s. Then, the heating
capacity of heat pump is ______ kW.
Q.55 The maximum torque that a shaft of 125 mm diameter can transmit, if the
maximum angle of twist is 1° in a length of 1.5 m is ____________ kN-m.
[Take G = 70 GPa].
14 of 17 26-12-2015 02:39
MADE EASY ONLINE TEST SERIES http://s1.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
Q.56 For ball bearings, the fatigue life L measured in number of revolutions
and the radial load F are related by FL1/3 = K, where K is a constant. It
withstands a radial load of 4 kN for a life of 600 million revolutions. The
load (in kN) for a life of one million revolutions is ___________.
__________.
Q.58 For the mechanism, shown, if link SH rotates at 60 rad/s, then velocity of
link MO is _________ rad/s.
Q.59 The crank effort diagram of an engine running a motion is showing area
above and below the mean lines in Joules.
15 of 17 26-12-2015 02:39
MADE EASY ONLINE TEST SERIES http://s1.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
Q.61 A 10 mm drill is used in a drill press operating at 600 rpm at a feed of 0.4
mm/rev for machining Titanium alloys. If the average unit power to
machine Titanium alloys is 3.55 W.s/mm 3, then the torque on the drill is
_______ N-m.
Q.64
Let F = . The value of where C is the curve in the
Q.65 A path AB is in the form of one quarter of circle of unit radius in 1st
16 of 17 26-12-2015 02:39
MADE EASY ONLINE TEST SERIES http://s1.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
17 of 17 26-12-2015 02:39