Professional Documents
Culture Documents
2022
1)A sieve analysis test was performed on a sample of coarse aggregate and produced the
following results: (50 pts)
a) Calculate the percent passing through each sieve.
b) What is the maximum size?
c) Plot the percent passing versus sieve size on a semi-log gradation chart. (Grading
curve)
d) Determine the fineness modulus, FM. Is it in the typical range?
2)Determine the following parameters for both the coarse and fine aggregate samples
(separately) based on the data provided in the following table: (50 pts)
Aggregate WOD (g) WSSD (g) Wsw (g) Wstock (g) Wpyc+w1 (g) Wpyc+agg+w2 (g)
Coarse
5220 5226 3294 5302 ---- ----
Aggregate
Fine
496 501 ---- 515 622 938
Aggregate
a) absorption capacity
b) moisture content
c) apparent specific gravity
d) bulk specific gravity (oven dry)
e) bulk specific gravity (SSD)