Professional Documents
Culture Documents
42SL417U
46SL417U
55SL417U
55S41U
Hi-Res PC Input
Digital Audio Output
Media Player - USB Capability
(JPEG/MP3/MPEG2/MPEG4/H.264)
Built-in WLAN
Yahoo! Widgets
HDMI-CEC Dynamic
Volume
ARC
AutoView®
Wallpaper
MAIN
BOARD
POWER
SUPPLY
LED
DRIVER
BOARD
T-CON
WI-FI BOARD
PJ860
PJ90 Supplies the Main Board with 4 – PJ90
12 volt
PJ860 provides the LEDlines and
Driver 2 – 24 volt lines to be
board
used
PJ91as
with operating voltages operating
Supplies
and thevoltages
switching andwith
Main Board LCD5 PJ91
voltsthe
commands (from StandbyPanel
Micro). Power.
voltage, AC Detect info,
and 24 volts LNB (Audio B+) voltage. It
also receives commands from the Micro
pertaining to switching and backlight
operation.
P801A
P801A is the AC input connector.
Normally AC is supplied from a wall
outlet or power strip.
J1
J1 receives operating voltages and
switching commands from PJ860 on the
Power Supply.
J2
J102 J101
ANTENNA 1
J2
ANTENNA 2
OR
OR
TO LED
DRIVERS
LED Driver Out
1. 78V
2. 78V
3. 3.2V
4. 3.2V
5. 3.2V
6. Gnd.
7. Gnd.
8. 3.2V
9. 3.2V
10. 3.2V
11. 78V
12. 78V
MUST HAVE
FOR MICRO
BACKLIGHT
OR VIDEO?
*** Warranty Authorization required if
display is replaced in warranty
CN91 – Go to
In/Out
www7.toshiba.com for instructions.
1. 12V>
2. 12V>
3. 12V>
4. 12V>
CHECKING MAIN PCB 5. Gnd.
6. Gnd.
7. Gnd.
8. Gnd.
9. 24V>
10. 24V>
11. Gnd.
12. Gnd.
SYSTEM B+
*** Warranty Authorization required if
display is replaced in warranty – Go to
www7.toshiba.com for instructions.
IF “NO” POWER
SUPPLY IS OK
www7.toshiba.com
AUDIO B+
CHECKING MICRO
BACKLIGHT DRIVER B+
WITHIN 4 SECONDS:
LCD 114
Covering the 42, 46, 55” SL417U and 55S41U
Chassis’
Thank you for your attendance