Professional Documents
Culture Documents
- Daily headlines
找不到想看的?搜尋看看!
DAILY HEADLINES
There are problems with the iphone5s mobile phone signal, most of
which are baseband problems and RF circuit problems. The baseband
portion is mainly composed of an application processor U1, a baseband
processor U1_RF, a main power supply IC U7, a baseband power supply
U2_RF, and a chip U6_RF. One of them is abnormal and will cause no
baseband. The IMEI is not visible inside the iphone5s mobile phone
system, and the data machine column is blank.
Therefore, the mobile phone has no signal to first check whether the
mobile phone has a serial number. If there is no serial number, it is a
problem of the baseband part, and has nothing to do with the radio
frequency circuit. If there is a serial number, it depends on whether the
SIM card can be recognized. If the SIM card cannot be identified, it has
nothing to do with the RF circuit. If the SIM can be identified, insert the
cards of different operators supported by the machine, and then find the
corresponding problem of the RF part.
First check the power supply of the baseband, with the following five
channels of power supply:
https://kknews.cc/digital/jzz9kq.html 1/10
9/1/2018 Fruits don't want to live in a world without signals, so take a look! - Daily headlines
找不到想看的?搜尋看看!
Measure the power of the chip (U6_RF), measure whether there is 1.8V
power supply on FL4_RF, if not, check if FL4_RF is open soldered, or check
https://kknews.cc/digital/jzz9kq.html 2/10
9/1/2018 Fruits don't want to live in a world without signals, so take a look! - Daily headlines
Mobile phone boot card, enter the operator manually in the settings, if
you can search for operators, such as: can search for China Mobile, or
China Unicom, it means no problem to receive, you must first repair the
launch part, if you can not find China Mobile Or China Unicom will
indicate that there is a problem with the reception, and the receiving part
must be repaired first.
Main fault of U17_RF: Check whether R60_RF has 2.65V power supply. If
the power supply is normal, check whether the ANT_SEL five groups of
frequency bands control the ground resistance of the baseband CPU to
normal. If all of the above are normal, replace U17_RF itself. Eliminate
U17_RF problems and replant or replace RF ICs.
https://kknews.cc/digital/jzz9kq.html 3/10
9/1/2018 Fruits don't want to live in a world without signals, so take a look! - Daily headlines
找不到想看的?搜尋看看!
https://kknews.cc/digital/jzz9kq.html 4/10
9/1/2018 Fruits don't want to live in a world without signals, so take a look! - Daily headlines
找不到想看的?搜尋看看!
related articles
Apple 5s can occasionally make a call, call
the phone to solve the problem
2016-07-28
https://kknews.cc/digital/jzz9kq.html 5/10
9/1/2018 Fruits don't want to live in a world without signals, so take a look! - Daily headlines
1, the logic part is also called PDA part, is the boot part of the
mobile phone, such as: CPU + power + hard disk + clock = logic
part 2, external interface part: also called human machine interface, such as: screen, keyboard,
camera module, earpiece, etc. 3. Baseband part: Also called the communication part, it consists
of: baseband CPU + baseband power supply + clock + baseband font file or chip + radio.
https://kknews.cc/digital/jzz9kq.html 6/10
9/1/2018 Fruits don't want to live in a world without signals, so take a look! - Daily headlines
https://kknews.cc/digital/jzz9kq.html 7/10
9/1/2018 Fruits don't want to live in a world without signals, so take a look! - Daily headlines
With a mobile phone, how happy and happy it is, based on the
premise that you can play, the wifi signal should be strong
enough (the flow is so expensive, save the province) to ensure that the signal will not be
interrupted, which is in line with the current suede standard, spicy What is the problem, if the
mobile phone wifi can not be opened, the signal is powerful and what is the use, so the mobile
phone wifi can not open the little friends, do not be squatting, grab the mobile phone to
Xunwei fast repair. what?
We use the mobile phone to make calls, surf the Internet, send
SMS, and the cpu will send commands to the baseband cpu. After the baseband receives the
command from the cpu, he will control the signal processing circuit he manages and send the
command to the signal base station.
The core part of the mobile phone has 3 major parts: one: the
logical part, also called the PDA part, is the booting part of the mobile phone, such as:
cpu+power + hard disk + clock = logic part 2: external interface part, also called man-machine
https://kknews.cc/digital/jzz9kq.html 8/10
9/1/2018 Fruits don't want to live in a world without signals, so take a look! - Daily headlines
interface part, For example: screen, keyboard, camera, etc. Three: baseband part, also called
communication part, is also composed of: baseband cpu + baseband power + clock + 找不到想看的?搜尋看看!
First, first remove the battery problem, and then check the boot
button section. Measure the resistance value of FL3, DZ1, R22, and U25 to ground, and replace
the corresponding components abnormally. FL3 is connected to one leg of DZ1 and has a
ground resistance of 472 ohms. R22's 1 pin has a resistance of 337 ohms and is connected to
the 5 pin of U25. Its 2 pin is connected to the 2 pin of U25 to a ground resistance of 472 ohms.
The x20 inlet water repair machine has a baseband version and
serial number, and the analysis is an RF fault. Check the RF supply
and measure no pulse voltage 1.5-3v here.
https://kknews.cc/digital/jzz9kq.html 9/10
9/1/2018 Fruits don't want to live in a world without signals, so take a look! - Daily headlines
https://kknews.cc/digital/jzz9kq.html 10/10