Professional Documents
Culture Documents
FE Analysis 1
1. Introduction
In this week, the moment distribution method will be revised for BEAMS
• Step2: the design and analysis of the same beams using ANSYS & LinePro
FE Analysis 2
2. Example 1
Given: Consider a 2-span beam subject to a uniformly distributed load, encastered (fixed – no rotation
or translation) at its ends. Assume EI = 106 N.m2
FE Analysis 3
2. Example 1
Step1:
Distribution Factors
`
Fixed End Moments:
FE Analysis 4
2. Example 1
FREE Bending Moment REACTANT Bending Moment
FE Analysis 5
2. Example 1
Step2:
FE Analysis 6
3. Example 2
Given: Consider a 3-span beam subject to a uniformly distributed and concentrated load, encastered
(fixed – no rotation or translation) at its ends. This Example was modeled in Week1
FE Analysis 7
3. Example 2
Step1:
Distribution Factors
FE Analysis 8
3. Example 2
Step1:
FE Analysis 9
3. Example 2
Step2:
FE Analysis 10
FE Analysis 11
THANK YOU
FE Analysis 12