Professional Documents
Culture Documents
Cut 60-Box Girder - Mu-Complete Report
Cut 60-Box Girder - Mu-Complete Report
Design Standard:
AASHTO LRFD 7th Edition, 2014
with 2015 Interim Revisions
Designer: ___; Date: Mar 30 2023
Project: _______________ Checker: ___; Date: Mar 30 2023
Item: Superstructure Design Ultimate Flexure; Request Name: Box Girder_Mu
Section Cut No. 60; Station: 55m; Location: Before; Left Exterior Girder
Live Load Distribution Factors were not calculated since the option was not selected in the design
request.
Designer: ___; Date: Mar 30 2023
Project: _______________ Checker: ___; Date: Mar 30 2023
Item: Superstructure Design Ultimate Flexure; Request Name: Box Girder_Mu
Section Cut No. 60; Station: 55m; Location: Before; Left Exterior Girder
2. Demands
Design Standard:
AASHTO LRFD 7th Edition, 2014
with 2015 Interim Revisions
Designer: ___; Date: Mar 30 2023
Project: _______________ Checker: ___; Date: Mar 30 2023
Item: Superstructure Design Ultimate Flexure; Request Name: Box Girder_Mu
Section Cut No. 60; Station: 55m; Location: Before; Left Exterior Girder
3. Resistance
Design Standard:
AASHTO LRFD 7th Edition, 2014
with 2015 Interim Revisions
Designer: ___; Date: Mar 30 2023
Project: _______________ Checker: ___; Date: Mar 30 2023
Item: Superstructure Design Ultimate Flexure; Request Name: Box Girder_Mu
Section Cut No. 60; Station: 55m; Location: Before; Left Exterior Girder
Φ = 0.9
f'c = 45.0 MPa
fpu = 1861.6 MPa
fy = 390.0 MPa
btop = 4.180 m = 4180 mm
hf top = 0.230 m = 230 mm
bw = 0.339 m = 339 mm
dp pos = 1.730 m = 1730 mm
Aps pos = 16100 mm^2
ds pos = 1.563 m = 1563 mm
As pos = 2599 mm^2
Prestressing factor
𝑓𝑝𝑦 1690
𝑘 = 2 (1.04 − ) = 2 (1.04 − ) = 0.26 LRFD eq. 5.7.3.1.1-2
𝑓𝑝𝑢 1862
Designer: ___; Date: Mar 30 2023
Project: _______________ Checker: ___; Date: Mar 30 2023
Item: Superstructure Design Ultimate Flexure; Request Name: Box Girder_Mu
Section Cut No. 60; Station: 55m; Location: Before; Left Exterior Girder
Assume rectangular section behavior and yielding of tension reinforcement; the compression
reinforcement is ignored. Calculate distance between neutral axis and the compressive face
LRFD 5.7.2.1
𝑐 256
𝑓𝑝𝑠 = 𝑓𝑝𝑢 (1 − 𝑘 ) = 1861.6 × (1 − 0.26 × ) = 1788.8 𝑀𝑃𝑎 LRFD eq. 5.7.3.1.1.-1
𝑑𝑝 1730
Flexural resistance
𝑐𝛽1 𝑐𝛽1
𝑀𝑟 = 𝜑 (𝐴𝑝𝑠 𝑓𝑝𝑠 (𝑑𝑝 − ) + 𝐴𝑠 𝑓𝑠 (𝑑𝑠 − )) =
2 2
256×0.73 256×0.73
0.9 × (16100 × 1788.8 × (1730 − 2
)+ 2599 × 390.0 × (1563.04347826087 − 2
)) =
43764404548 𝑁𝑚𝑚 = 43764 𝑘𝑁𝑚 LRFD eq. 5.7.3.2.2-1
Left Exterior Girder Demand over Capacity Ratio for Positive Flexure
𝑫 𝑀𝑢 28613
= = = 𝟎. 𝟔𝟓𝟒 O.K
𝑪 𝑀𝑟 43764
Designer: ___; Date: Mar 30 2023
Project: _______________ Checker: ___; Date: Mar 30 2023
Item: Superstructure Design Ultimate Flexure; Request Name: Box Girder_Mu
Section Cut No. 60; Station: 55m; Location: Before; Left Exterior Girder
Φ = 0.9
f'c = 45.0 MPa
fpu = 0.0 MPa
fy = 390 MPa
bbot = 1.933 m = 1933 mm
hf bot = 0.171 m = 171 mm
bw = 0.339 m = 339 mm
dp neg = 0.000 m = 0 mm
Aps neg = 0 mm^2
ds neg = 1.863 m = 1863 mm
As neg = 3616 mm^2
Assume rectangular section behavior and yielding of tension reinforcement; the compression
reinforcement is ignored. Calculate distance between neutral axis and the compressive face
𝑐 26
𝑑𝑠
= 1863 = 0.01 ≤ 0.60 O.K.
𝑐 26
𝑓𝑝𝑠 = 𝑓𝑝𝑢 (1 − 𝑘 𝑑 ) = 0.0 × (1 − 0.00 × 0
) = 0.0 𝑀𝑃𝑎 LRFD eq. 5.7.3.1.1.-1
𝑝
Flexural resistance
𝑐𝛽1 𝑐𝛽1
𝑀𝑟 = 𝜑 (𝐴𝑝𝑠 𝑓𝑝𝑠 (𝑑𝑝 − ) + 𝐴𝑠 𝑓𝑠 (𝑑𝑠 − )) =
2 2
Designer: ___; Date: Mar 30 2023
Project: _______________ Checker: ___; Date: Mar 30 2023
Item: Superstructure Design Ultimate Flexure; Request Name: Box Girder_Mu
Section Cut No. 60; Station: 55m; Location: Before; Left Exterior Girder
26×0.73 26×0.73
0.9 × (0 × 0.0 × (0 − )+ 3616 × 390.0 × (1862.5 − )) = 2351808103 𝑁𝑚𝑚 =
2 2
2352 𝑘𝑁𝑚 LRFD eq. 5.7.3.2.2-1
Left Exterior Girder Demand over Capacity Ratio for Negative Flexure
𝑫 𝑀𝑢 15962
= = < 0 => 𝟎. 𝟎𝟎𝟎
𝑪 𝑀𝑟 −2352
O.K
Designer: ___; Date: Mar 30 2023
Project: _______________ Checker: ___; Date: Mar 30 2023
Item: Superstructure Design Ultimate Flexure; Request Name: Box Girder_Mu
Section Cut No. 60; Station: 55m; Location: Before; Left Exterior Girder
4. Summary Tables
Design Standard:
AASHTO LRFD 7th Edition, 2014
with 2015 Interim Revisions
Designer: ___; Date: Mar 30 2023
Project: _______________ Checker: ___; Date: Mar 30 2023
Item: Superstructure Design Ultimate Flexure; Request Name: Box Girder_Mu
Section Cut No. 60; Station: 55m; Location: Before; Left Exterior Girder
Concrete
Geometry Ac Top hf Top bf Top bw Ac Bot hf Bot bf Bot d CG Top CG Bot f'c
Units mm^2 mm mm mm mm^2 mm mm mm mm mm MPa
Left Exterior 961400 230 4180 339 329843 171 1933 2100 710 1390 45.0
Girder
Right Exterior 993600 230 4320 339 329843 171 1933 2100 700 1400 45.0
Girder
Legend:
Ac Top - Tributary area of the top slab.
hf Top - Equivalent thickness of the top slab.
bf Top - Tributary width of the top slab.
bw - Width of the web.
Ac Bot - Tributary area of the bottom slab.
hf Bot - Equivalent thickness of the bottom slab.
bf Bot - Tributary width of the bottom slab.
d - Depth of the girder.
CG Top - Distance from centroid of section to the topmost point of the bridge section.
CG Bot - Distance from centroid of section to the bottommost point of the bridge section.
f'c - Concrete strength f'c of the girder.
Designer: ___; Date: Mar 30 2023
Project: _______________ Checker: ___; Date: Mar 30 2023
Item: Superstructure Design Ultimate Flexure; Request Name: Box Girder_Mu
Section Cut No. 60; Station: 55m; Location: Before; Left Exterior Girder
Legend:
Aps Neg - Area of top prestress tendons.
Aps Pos - Area of bottom prestress tendons.
dp Neg - Distance from the bottom fiber to the centroid of those tendons that are located above the
bottom compression zone.
dp Pos - Distance from the top fiber to the centroid of those tendons that are located below the top
compression zone.
As Neg - Area of top reinforcement.
As Pos - Area of bottom reinforcement.
ds Neg - Distance from the bottom fiber to the centroid of those rebars that are located above the
bottom compression zone.
ds Pos - Distance from the top fiber to the centroid of those rebars that are located below the top
compression zone.
fpu Neg - Specified tensile strength of top prestress tendons (weighted average).
fpu Pos - Specified tensile strength of bottom prestress tendons (weighted average).
fys - Yield strength of longitudinal rebar.
fs Neg - Stress in longitudinal rebar located in tensile zone for negative moment.
fs Pos - Stress in longitudinal rebar located in tensile zone for positive moment.
k Neg - Factor k per eq. 5.7.3.1.1-2 top.
k Pos - Factor k per eq. 5.7.3.1.1-2 bottom.
Designer: ___; Date: Mar 30 2023
Project: _______________ Checker: ___; Date: Mar 30 2023
Item: Superstructure Design Ultimate Flexure; Request Name: Box Girder_Mu
Section Cut No. 60; Station: 55m; Location: Before; Left Exterior Girder
Legend:
TSect Pos - Is section T section for positive moment?
TSect Neg - Is section T section for negative moment?
Beta1 - Stress block factor per 5.7.2.2
c Pos - Distance from the extreme compression fiber to the neutral axis for positive moment.
c Neg - Distance from the extreme compression fiber to the neutral axis for negative moment.
a Pos - Depth of the equivalent compression stress block for positive moment.
a Neg - Depth of the equivalent compression stress block for negative moment.
a Loc Pos - Extend of equivalent compression stress block for positive moment
a Loc Neg - Extend of equivalent compression stress block for positive moment
fps Pos - Average stress in the prestressing steel at nominal bending resistance for positive moment (eq.
5.7.3.1.1-1).
fps Neg - Average stress in the prestressing steel at nominal bending resistance for negative moment
(eq. 5.7.3.1.1-1).
Designer: ___; Date: Mar 30 2023
Project: _______________ Checker: ___; Date: Mar 30 2023
Item: Superstructure Design Ultimate Flexure; Request Name: Box Girder_Mu
Section Cut No. 60; Station: 55m; Location: Before; Left Exterior Girder
Legend:
LLDF Mom - Live load distribution factor for moment.
φ - Resistance factor.
Mr Pos - Factored resistance for positive bending.
Mu Pos - Controlling positive bending demand moment.
Combo Pos - Name of combination that controls positive moment demand.
Dem Set Pos - Name of demand set that controls positive moment demand.
Mr Neg - Factored resistance for negative bending.
Mu Neg - Controlling negative bending demand moment.
Combo Neg - Name of combination that controls negative moment demand.
Dem Set Neg - Name of demand set that controls negative moment demand.