Professional Documents
Culture Documents
2. A drawing that shows front, right, top and sides of an object are known as?
a. Isometric drawings
b. Wiring diagrams
c. Engineers Drawings
d. Orthographic Projection
a. Isometric drawings
b. Orthographic projections
c. Building sketches
d. Blueprint drawings
4. This type of drawing shows parts of a unit “blown up” and labeled in order to view all the internal
parts, and where they’re located in the unit.
a. Orthographic projection
b. Isometric drawing
c. Installation instructions
d. Detail and Design drawings
5. The best visual aid in helping to find some component in an electrical system are?
a. Ladder diagram
b. Wiring diagram
c. Isometric drawing
d. Orthographic projections
6. What often accompanies a wiring diagram in order to identify components ie. Switches, Connectors
etc…?
a. Parts list
b. Index
c. Legend
d. None of the above
7. Pressure, Liquid level, or temperature switched on a schematic diagram are always shown in what
way?
a. Normally open
b. Normally energized
c. Normally closed
d. Both a and c
8. On a schematic diagram, the difference between a limit and an electronic limit are what?
a. Nitrogen line
b. Fuel discharge line
c. Propane line
d. Oil line
a. On an x/y axis
b. With bars showing different values
c. With triangular shapes inside a circle
d. Both a and b
a. Roof slope
b. Roof thickness
c. Roof covering material
d. Roof width
13. On a 6/12 roof…
a. The ESA
b The TSSA
c. The CGA
d. THE CSA
15. The code book used as a guide for field installation on natural gas and propane is?
a. B-149.2
b. B-149.1
c. B-149.5
d. B-149.3
16. The B-149.1 code book has how many main section as outlined in the table of contents?
a. 11
b. 9
c. 10
d. 12
17. The TSSA is the governing body that on occasion will release?
a. Safety bulletins
b. Service Bulletins
c. News Bulletins
d. All of the above
18. In the event there is a conflict between the B-149.1 installation code and the Certified installation
instructions?
19. Which of the following will you find in the certified installation instructions of an appliance?
20. As a gas technician out in the field, what is required to be with you at all times?
21. Which type of drawing shows the finished building, the way it would actually appear?
a. Orthographic projection
b. Isometric drawing
c. Detail and assembly drawing
d. Technical drawings
e. Pictorial
22.
What is this?
a Natural gas
b Propane
c Nitrogen
d Oxygen
a. false
b. true
a. 1000
b. 10,000,000
c. 1,000,000,
d. 100
a. A 90 degree elbow
b. A 22 degree elbow
c. a 45 degree coupling
d. A 45 degree elbow
a. A tee fitting
b. A 90 degree elbow
c. A cross
d. A 45 degree elbow
b. Temperature
c. Flow
d. Pressure
30. What is this?
a. A coupling
b. A 45 degree elbow
c. A reducing coupling
d. A cross fitting