Professional Documents
Culture Documents
SikaProof®-808
Pre-applied fully bonded FPO sheet membrane for basement waterproofing
PRODUCT INFORMATION
Composition Membrane Layer FPO
Bonding Layer Cement modified polymer
(A+ Technology)
1/4
Storage conditions The Product must be stored in original unopened and undamaged sealed
packaging in dry conditions and temperatures between +5 °C and +30 °C.
Store in a horizontal position. Do not stack pallets on top of each other.
Appearance and colour Colour Light grey
Surface texture Rough surface on A+ bonding layer
TECHNICAL INFORMATION
Resistance to impact Method B ≥ 800 mm (EN 12691)
Crack bridging ability No cracks occurred after 100 cycles at 3.2 mm width (ASTM C1305)
2/4
Durability of watertightness against 28 days, +23 °C Pass (EN 1847)
chemicals
24 hours, 60 kPa Pass (EN 1928)
SYSTEM INFORMATION
System structure The following system products must be used in the pre-applied system:
▪ SikaProof®-808 sheet membrane
▪ SikaProof® Tape-120 for detailing and for internal jointing
APPLICATION INFORMATION
Ambient air temperature Maximum +45 °C
Minimum +5 °C
3/4
ment: SikaProof®-808
LOCAL RESTRICTIONS
Note that as a result of specific local regulations the
declared data and recommended uses for this product
may vary from country to country. Consult the local
Product Data Sheet for exact product data and uses.
LEGAL NOTES
The information, and, in particular, the recommenda-
tions relating to the application and end-use of Sika
products, are given in good faith based on Sika's cur-
rent knowledge and experience of the products when
properly stored, handled and applied under normal
conditions in accordance with Sika's recommenda-
tions. In practice, the differences in materials, sub-
strates and actual site conditions are such that no war-
ranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any
legal relationship whatsoever, can be inferred either
from this information, or from any written recom-
mendations, or from any other advice offered. The
user of the product must test the product’s suitability
for the intended application and purpose. Sika re-
serves the right to change the properties of its
products. The proprietary rights of third parties must
be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product
Data Sheet for the product concerned, copies of which
will be supplied on request.
SikaProof-808-en-ID-(06-2022)-3-1.pdf
4/4