Professional Documents
Culture Documents
PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and
Values only )
1 2 4 5 13 53 55
1 PART A: SANITARY FIXTURES AND CP FITTINGS
1.01 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 INR Zero Only
x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from
5.00 Each 0.00
back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of
Engineer-in-charge.
1.02 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of INR Zero Only
approved quality and make, including painting of fittings and brackets, cutting and making good the
walls wherever required:- 15.00 Each 0.00
White Vitreous China Wash basin size 550x400 mm with a
15 mm CP Brass single hole basin mixer
1.03 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and INR Zero Only
stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls
1.00 Each 0.00
wherever required : Kitchen sink with drain board 510x1040 mm (Single bowl) bowl depth 250
mm.Make:Crystal,Carysil
1.04 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and INR Zero Only
stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls
1.00 Each 0.00
wherever required : Kitchen sink with drain board 510x1040 mm (Double bowl) bowl depth 250
mm.Make:Crystal,Carysil
1.05 Providing & fixing of Vitreous China Flair bowl Wash Basin of approved size & make installed Over INR Zero Only
granite counter type, with a pair of brackets, fixing to wall daddo with required materials like plastic plugs, packing
pieces, screw nails etc, with C.P Mixer cock of approved type & model, 32mm dia C.P.Waste coupling, 32mm dia
C.P. bottle trap, C.P.connecting pipe, 15mm dia C.P.angle stop cock for cold water supply with wall flange etc.
The work Shall include cutting & making good the walls & floors, testing & commissioning the installation .TOTO 6.00 Each 0.00
WB LW951CJ CONSOLE LAVATORY 1 TAP HOLE W/BRACKET,HSN : 69101000
1.06 Providing and fixing one piece construction white vitreous china squatting plate with an integral INR Zero Only
longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe
for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete,
including painting of fittings and cutting and making good the walls and floors etc. wherever required: 10.00 Each 0.00
Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern
1.07 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet INR Zero Only
of approved brand/make, shape,size and pattern including integrated white vitreous china cistern ofcapacity 10
litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and
gasket etc 1.00 Each 0.00
including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-
Charge.
1.08 Supply, Installation, Testing & Commissioning of white vitreous European wall mounting of approved INR Zero Only
make including Cisten (Capcity 3/6 lit) with Flush Plates of approved make including required "P" trap, seat
cover, cistern fittings, nuts, bolts, Rubber gasket, wall cutting as required etc., complete. making holes in
masonry or concrete,restoring the damaged materials, testing & commissioning the nstallation etc complete.,
Make : Toto
Geberit CT 110.120.00.1 KF-B WC Alpha-10cm 90/110 6L IN,HSN: 39229000, Geberit ACP 15.00 Each 0.00
115.045.21.2,Alpha Dual Pl Bright Chr,HSN: 39229000,TOTO Ceramics WC CW822RA#W"Avante" Wall
HungRimless Fixing kit
HSN:69072100 , TOTO SC TC385VS,Seat & Cover - Soft Close,HSN:39222000, TOTO AP TX215C ,Slip-
in Connector,HSN: 40169390
1.09 Providing and fixing of CP health faucet , Hand operated spray unit (instant type) with CP Crutch and PVC INR Zero Only
flexible tube of 1.0m length. ,TOTOHX20MCRB 15.00 Each 0.00
1.10 Providing and fixing of 15mm dia CP brass Robe Hook with wall flange. INR Zero Only
MAKE : TOTO 20.00 Each 0.00
1.11 Providing and fixing of 15mm dia CP brass Toilet Roll Holder with wall flange. INR Zero Only
20.00 Each 0.00
1.12 Providing, fixing, testing and commissioning of CP brass superior quality Towel ring with flange with INR Zero Only
concealed brass screws etc. including cutting & making good the wall etc. Make :Toto-YT903S4 7.00 Each 0.00
1.13 Providing and fixing of shower assembly unit consisting of over headShower, arrangements with shower INR Zero Only
arm including cutting, chasing & making good the walls.
TOTO SHW TX488SI,ICON'Fixed Shower Head W/Pipe -Wall Type 6.00 Each 0.00
HSN: 84818020
1.14 Providing and fixing of shower assembly unit consisting of HandShower, arrangements with shower arm INR Zero Only
including cutting, chasing & making good the walls.
TOTO FT TBW02006A,Hand Shower 3 mode,with hanger and hose 6.00 Each 0.00
HSN: 39221000
1.15 Providing and fixing Concealed Body For S/L Diverter 40Mm Car, Single Lever Exposed Parts Kit Of INR Zero Only
Diverter and Hand Shower 100Mm Dia Round Shape Single Sliding rail 19mm and 600mm long round,
Shower Arm casted 190mm long light body,O/Head shower singleflow 100mm dia,Flexible Tube 8mm
dia and 1.5mt long including all material work completed. 7.00 Each 0.00
TOTO DVT TBG04304B,Single Lever Shower,Mixer with diverter
HSN: 84818020,TOTO TBN01001B,Concealed Box,HSN: 84818020
1.16 Providing and fixing consisting of Bath Spout, arrangements including cutting, chasing & making good the INR Zero Only
walls.
15.00 Each 0.00
TOTO SP TTBR101,Bath Spout W/DiverterHSN: 84818020
1.17 Providing and fixing of 15mm dia CP brass angle stop cock with wall flange. INR Zero Only
Make :Toto 15.00 Each 0.00
1.18 Providing and fixing of 15mm dia CP brass stop cock with wall flange. INR Zero Only
Basic cost of Stop Cock: Rs. 500 [Jaquar (Model No.- ARI - 39083K)] 15.00 Each 0.00
1.19 Supplying and fixing soap holder with metalic bottle and necessary SS screws, etc complete Make :Toto INR Zero Only
12.00 Each 0.00
1.20 Supplying and fixing, soap dispenser with metalic bottle and necessary SS screws, etc complete Make INR Zero Only
:Toto 12.00 Each 0.00
2 PART B : CPVC PIPES AND FITTNGS (INTERNAL AND EXTERNAL WATERSUPPLY)
3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot
& cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent
cement and the cost of cutting chases and making good the same including testing of joints
complete as per direction of Engineer in Charge.
INTERNAL (CONCEALED IN WALL) : COLD & HOT WATERSUPPLY
Note: Strictly use SDR-11 /13.5 grade ASTRAL - CPVC pipe and fittings for internal hot water
supply up to 50 mm dia.
4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot
& cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe
with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC
solvent cement and testing of joints complete as per direction of Engineer in Charge. -VERTICAL
SHAFT/ TERRACE
Note: Strictly use SDR-11 /13.5 grade ASTRAL - CPVC pipe and fittings for internal hot water
supply up to 50 mm dia.
5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold
water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings
with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of
Engineer in Charge.
Below Ground Level Header :
6 Providing, fixing testing and commissioning of Gun metal brass Ball Valve including unions etc., Complete
7 Providing, fixing, testing and commissioning of cast iron lever operated slim seal type butterfly valves of
CI body and spheroidal graphite iron disc (SG iron),with nitrile rubber seal, tested to 10 kg / sq.cm Confrming to
BS 5155 / MF6 standards and including a set of GI flanges as per BS-10 table 1 including bolt nuts, and
Neoprene rubber gaskets etc., Complete (Inter valve make).
8 Providing, fixing, testing and commissioning of brass body nickel plated automatic air release valves INR Zero Only
with brass splindle, NBR and joinfraniteelastomer,staniless steel spring polypropylenic float at the top 5.00 Each 0.00
most points of watersupply distribution ringmain.
9 25 mm dia fixing, testing and commissioning of brass`Y' / pot stainer screw type tested to 20 kg / sq.cm.
Providing,
10 Providing, fixing, testing and commissioning of slimseal flap type NRV ( valve ) with CI body and
cast steel disc pressure rating PN-10 Kg / sq.cm
11 Providing, fixing, testing and commissioning of SS or BRASS pressurized ball float valve with gun metal INR Zero Only
lever of approved quality for OHT filling inlet. 25 mm dia 1.00 Each 0.00
12 Providing, fixing, testing and commissioning of Outer ( Gate valve ) Main line for Metro water with CI INR Zero Only
body 3.00 Each 0.00
80 mm dia
13 Construction of valve chambers of internal clear dimension as mentioned below by using first class table INR Zero Only
moulded modular bricks 230 mm thick wall in cement mortar joints in 1:4, over CC 1:4:8 bed 150 mm
thick & plastering in CM 1:6 15 mm thick with adding water proof compound as per standard
specifications for bottom and internal side walls, exposed top surface funished smooth etc., including
necessary execavation in all types of soil excluding soft rock and hard rock, back filling with available
excavated earth including consolidation in layer not exceding 200 mm in depth, disposing of surplus 3.00 Each 0.00
earth to all leads & providing precast ready made lighty duty RCC cover with frame of SFRC with frame
(as per standard make or SFRC / southern concrete company) curing etc. complete.
Size 600 x 600 x 750mm deep
14 Providing, fixing, testing and commissioning of ball valves (GARDENING Tap) of brass body nickel INR Zero Only
plated with stainless steel ball, lever operated with gun metal nozzel for connecting rubber hose (RB /
ZOLOTO make) and tested to 20 kg / sq.cm. 2.00 Each 0.00
20 mm dia
15 Supply and fixing 600mm long puddle flange consisting of 6mm thick welded GI / MS plate, flanges of
sutible size hot dip galvanised to 100 micron properly fixed in walls of water tanks as per specifications
and approved drawings and shall be of following diameters. FOR U.G.SUMP
18 Providing, fixing, testing and commissioning of PVC soil, waste and vent pipe confirming to IS 13592
of SWR Type B quality (6 kg / sq.cm pressure rated) , including all fittings, like Bends, Tees, Elbows,
Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent
cement followed by application of leak proof adhesive like FRP paste, fixed to wall with properly
fabricated MS bracket of suitable size, GI 'U' clamps with bolts, nuts and GI washers complete, for soil
and waste pipe lines laid in vertical shafts.
18.1 EXTERNAL (IN SHAFTS Toilets waste): INR Zero Only
75mm dia waste pipe ( Type B ) 70.00 Meter 0.00
20 Providing, fixing, testing and commissioning of PVC trap of self cleansing design moulded or fabricated, if
not available in size mentioned below, with or without vent arm jointing with rubber ring / solvent cement followed
by application of leak proof adhesive like FRP paste including PVC extension pipe for PVC / floor trap for with
surface preparation with finishing etc., complete size: 100 mm dia x 400 mm length. Making good the floors.
Note :Rate is excluding for earthwork and backfilling. It shall be measured separate and paid for.
20.1 110mm X 75 mm dia Inlet & Out let ( Multi Utility trap ) INR Zero Only
30.00 Each 0.00
20.2 110mm dia inlet 110mm dia out let (P Trap) - Deep seal type INR Zero Only
10.00 Each 0.00
21 Providing, fixing, testing and commissioning of PVC connecting collar (fabricated) for connecting PT & WB
bottle trap pipe, complete jointing with solvent cement followed by application of leak proof adhesive like FRP
paste including cutting and making good the walls and floors.
22 Providing, fixing, testing and commissioning of CP grating cockroach type setting in floor with white cement INR Zero Only
mortar and making good the floor. 25.00 Each 0.00
125 mm dia
23 Providing, fixing, testing and commissioning of PVC waste pipe of agricultural sereis conforming to IS
4985 including all fittings like tees, elbows, bends, collars, coupling, etc jointing with solvent cement
followed by application of leak proof adhesive like FRP paste laid on floors inside the toilets to the
required slope including making necessary bores in walls / foundations / concrete slab as applicable,
making good the bores with CM 1:3 or cement concrete as applicable, curing etc., complete.
Note :Wall chasing shall be done with chasing machine to required lines and levels.
24 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry INR Zero Only
chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not
less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
180x150 mm size P/s type 10.00 Each 0.00
25 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in
cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal
dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight
of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20
mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40
mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand),
finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per
standard design:
25.1 Inside dimensions 455x610 mm and 45 cm deep for single INR Zero Only
pipe line :
With common burnt clay F.P.S. (non modular) 2.00 Each 0.00
bricks of class designation 7.5
25.2 Inside dimensions 500x700 mm and 45 cm deep for pipe INR Zero Only
line with one or two inletsk.
With common burnt clay F.P.S. (non modular) 2.00 Each 0.00
bricks of class designation 7.5
25.3 Inside dimensions 600x 850 mm and 45 cm deep for pipe INR Zero Only
line with three or more inlets :
With common burnt clay F.P.S. (non modular) 2.00 Each 0.00
bricks of class designation 7.5
25.4 Extra for depth beyond 45 cm of brick masonry chamber INR Zero Only
For 455x610 mm sizeWith common burnt clay F.P.S. (non modular)
bricks of class designation 7.5 1.00 Meter 0.00
26 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks
and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
26.1 With common burnt clay F.P.S. (non modular) bricks of INR Zero Only
class designation 7.5
1.00 Each 0.00
26.2 Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter INR Zero Only
and 1.20 m long complete as per standard design.
1.00 Each 0.00
27 Excavating trenches of required width and depth for external underground drainage pipes, in all kinds
of soil exluding soft rock and hard rock including excavation for sockets and dressing of sides, ramming
of bottoms & getting out the excavated soil & then refilling the the tranch with soil as required in layers
not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc.,
including disposal of excess soil to all leads or as instructed by the site project Engineer.
30 Providing & fixing of PVC baby nahani trap of self cleansing design moulded or fabricated, if not INR Zero Only
available in size mentioned below, with or without vent arm, connecting to balcony rain water pipe,
complete including cutting and making good the walls and floors. 10.00 Each 0.00
110mm x 75mm dia
31 Providing and fixing CP grating of 6mm thick with rim including setting in floor with white cement mortar INR Zero Only
and making good the floor (Chilli Make).
75 mm dia 10.00 Each 0.00
32 Providing, fixing, testing and commissioning of PVC welded rain water head / khurras dome type grating INR Zero Only
with puddle flange to fix head in RCC slab specially fabricated from minimum 4mm thick PVC sheet,
including removable heavy duty PVC grating of 50 x 3 mm thick PVC flats (Round or Square) as per
approved design The quoted rate shall include for necessary grouting the khurras base with approved 4.00 Each 0.00
sealant complete all as shown in the drawing and as specified.
110 x 110mm SS Grating
33.00 Providing and fixing of 600 x 600mm HEAVY duty cast iron manhole cover with frame weighing not less INR Zero Only
than 50 kg for over head and UG sump and stormwater collection tank.
5.00 Each 0.00
34 Supply and fixing 600mm long puddle flange consisting of 6mm thick welded GI / MS plate, flanges of sutible
size hot dip galvanised to 100 micron properly fixed in walls of water tanks as per specifications and approved
drawings and shall be of following diameters.
36 PART – E : MISCELLANEOUS
37 LEVEL CONTROLLERS INR Zero Only
Supplying and fixing of digital percentage level indicator for the following storage tanks consisting of
display unit and level sensor. The display unit should have 2-1/2 digit seven segment LED to display the
levels as 0%, 10% --- 100%. The unit should be weather proof and wall / panel mounted input to the unit
should be 230V AC. The level sensor should consists of float operated magnetic float switch with one
PUF float suitable mounting flange and flame proof enclosure. The unit shall be BMS Compatable 1.00 Each 0.00
a) Domestic raw & treated water storage tank at master UG sump. Location of level indicator near
domestic pumps control panel at master pump room.
38 Supplying , installing, testing and commissioning of approved make vertical magnetic float switch with
52mm dia SS 316 floats, 2-1/2" table F flange and weather proof enclosure to sense high, low level of
the sump. Automatic pump controller.
Depth of Sump: Approx- 2.5m.
Make: Filpro/Approved equivalent
38.1 a) Storm water transfer pumps at basement. INR Zero Only
39 Supplying , installing, testing and commissioning of approved make vertical/horizontal type Electric INR Zero Only
'water heater suitable for pressure rating up to 4Kg/sqcm with heating element with thermostat, 2 nos.
15mm dia CP angle valve, pressure relief valve, non-return valve with CP copper connecting pipes with
wall flanges etc., complete with all inlets, outlets, valves and all other accessories etc., complete. 7.00 Each 0.00
a) 10 lts. 2 K.W heating element
40 1.5 Hp- Pressure Booster Pump set Single phase 1.5 Hp Pr. Booster Pump set - Del pipe size: 32 x 25 INR Zero Only
mm ( 1-1/4" x 1") Head: 18 - 50 Mts ( 165 Ft) , SH - Series, Max Cap: 5 m3 /Hr @35 Mts, 3.5 m3 /Hr
@40 Mts. Approved Make . 24 Lts Tank . During service, Site work, Transport, Rubber spares & 1.00 Each 0.00
Painting cost extra. Singlle Phase DOL Starter with Over Load Relay. -
41 Supplying, fixing, testing and commissioning Transfor pump, of adequate HP, capable of giving a INR Zero Only
required discharge at suitable head to work on 3Ph 50Hz, 400/440V with necessary unions, flanges etc.,
complete. The quoted rate shall exclude control panel and wiring from TPN switch to control panel and
to the pumps for the following duty conditions. The rate shall include necessary Chain pulley and guide 1.00 Each 0.00
rail arrangement for easy maintenance.( FOR OHT TRANSFOR) - Make: Grundfos
42 Supplying, testing and commissioning of centrifugal submersible sump pumps, suitable for 415 ± 10% INR Zero Only
Volts, 3 phase/230 ±10% volts 50 Hz A.C. power supply. Each pump shall suitable for automatic/manual
operation complete with control panel, high low level controller for each pump, necessary wiring and all
arrangement required to make the system operatoinal as per specification.
1.00 Each 0.00
(Make:- Grundfos or Equivalent) Pump Room Sump Drainage (1W), Capacity/Flow Rate - 2LPS,
Set in Pressure - 12 mtr head. Solid Handling - 38mm
43 Supply and Fixing of Sintex Tank with Capacity - 20000 ltrs. Should be 100% UV stabilized, Made up of INR Zero Only
100% virgin material, Threaded lid, Extra insert lid for protection from algae formation, ISI Marked. FDA
Approved. 4.00 Each 0.00
44 Supplying, laying and jointing glazed stoneware pipes class SP 1 with Stiff mixture of cement mortar in INR Zero Only
the proportion of 1:1 (1 Cement : 1 Sand) including testing of joints etc., complete,
100mm dia SW pipes 500.00 Meter 0.00
45 Providing sand cast iron drop connection externally for 60 cm drom from branch sewer line to main INR Zero Only
sewer manholes including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and
bend encased all-round with cement concrete 1:5:10 (1 Cement : 5 Fine aggregate : 10 graded stone
aggregte 40mm nominal size) with all centreing and shuttering required in cutting holes in walls and
making good with brick work in Cement Mortar 1:4 (1 Cement : 4 Fine aggregate) plastered with cement
mortar 1:3 ( 1 Cement : 3 Fine aggregate) on inside on the manhole wall, lead caulked joints between 500.00 Meter 0.00
sand cast iron pipes and fittings, stiff cement mortar 1:1 (1 Cement : 1 Fine aggregate) joints between
sand cas iron tee and S.W. pipe, making required channels complete as per standard desing and
specifications:
100 mm dia SW pipes
46 Providing sand cast iron drop connection externally for 60 cm drom from branch sewer line to main INR Zero Only
sewer manholes including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and
bend encased all-round with cement concrete 1:5:10 (1 Cement : 5 Fine aggregate : 10 graded stone
aggregte 40mm nominal size) with all centreing and shuttering required in cutting holes in walls and
making good with brick work in Cement Mortar 1:4 (1 Cement : 4 Fine aggregate) plastered with cement
mortar 1:3 ( 1 Cement : 3 Fine aggregate) on inside on the manhole wall, lead caulked joints between 20.00 Each 0.00
sand cast iron pipes and fittings, stiff cement mortar 1:1 (1 Cement : 1 Fine aggregate) joints between
sand cas iron tee and S.W. pipe, making required channels complete as per standard desing and
specifications:
100 mm dia Sand cast iron drop connection
47 Supplying, Installing and testing of pipes and conveying to position and jointing to true lines and INR Zero Only
gradients, PVC pipe of IS 985 (6 Kg/cm2), jointing the pipeline as per specificaiton, testing the pipeline
after installation to the specified hydrostatic test pressure including supplying, installing specials like
bends, couplers, sockets, connection etc., as per provision of IS 1742 - 1983 (code of practise for
building drinage) complete. 110mm OD IS 4985 (10 Kg/cm2)
20.00 Meter 0.00