The document provides step-by-step instructions for switching on and off a machine. To switch on the machine, the main switch must be set to position 1, which activates the control and boots it in phases. The control voltage indicator will light up once the control voltage is on. Any emergency stops must be acknowledged, with the indicator again lighting up. The starting image will appear once any disturbances are removed. The operator must check that all systems like hydraulics and pneumatics are on before selecting the operating mode.
To switch off the machine, the axes must not be moving. The control voltage is set to off and the control system is exited from the menu and shut down. The main switch is then set to
The document provides step-by-step instructions for switching on and off a machine. To switch on the machine, the main switch must be set to position 1, which activates the control and boots it in phases. The control voltage indicator will light up once the control voltage is on. Any emergency stops must be acknowledged, with the indicator again lighting up. The starting image will appear once any disturbances are removed. The operator must check that all systems like hydraulics and pneumatics are on before selecting the operating mode.
To switch off the machine, the axes must not be moving. The control voltage is set to off and the control system is exited from the menu and shut down. The main switch is then set to
The document provides step-by-step instructions for switching on and off a machine. To switch on the machine, the main switch must be set to position 1, which activates the control and boots it in phases. The control voltage indicator will light up once the control voltage is on. Any emergency stops must be acknowledged, with the indicator again lighting up. The starting image will appear once any disturbances are removed. The operator must check that all systems like hydraulics and pneumatics are on before selecting the operating mode.
To switch off the machine, the axes must not be moving. The control voltage is set to off and the control system is exited from the menu and shut down. The main switch is then set to
or automatic (continue production) DS Vers. 3 04.2013 1 2 Switch Off Machine Example for step by step procedure for switching off machine.
Axes must not be about to move.
1) Control voltage -S02M00- OFF O| 2) MENU SELECT > Exit O.K. 3) Wait until the control system is shut down. 4) Main switch -Q01M00- off ”0“. 5) Everything switched off? Hydraulic, pneumatic, coolant, chip conveyer, exhaust?