Professional Documents
Culture Documents
Notes:-
BRIDGE
MIDDLE
HUMBUCKER COLOUR KEY Positions 1, 2 & 3 are standard neck/both/bridge humbucker settings,
NECK
positions 4, 5 & 6 are like the middle positions of a 5-way selector.
1 NORTH Start wire
Vol P/P switch only affects the middle pickup in position 5 - pull out for
2 NORTH Finish wire humbucker and push in for single coil. Tone P/P switch only affects
position 5 - pull out for all three p.u.s, push in for middle p.u. only.
3 SOUTH Finish wire To split to the 'inner' coil, transpose wires 1 & 4 on every pickup.
4 SOUTH Start wire The colour coding or magnetic polarity shown here does not represent
any particular pickup manufacturer - please follow key.
Grd To Bridge
(SHIELD)
(SHIELD)
(SHIELD)
4 3 2 1 4 3 2 1 4 3 2 1
(M)
Any solder points
shown in between
pads are meant to 4 1
abridge both pads
Vol Tone 5 2
Single Coil 6 3 Bridge+Neck
(or option for Humbucker)
(or option for 3 x pu.s)
c
Keep all wires as short as possible
(use shielded cable where longer)
(Sleeve)
(N)
Model No:-
3X3-03 Free-Way Switch HHH + 2 x P/P Pots 1V/1T
REVERSE VIEW OF PICKUPS, SWITCH AND POTENTIOMETERS.
BRIDGE
Notes:-
MIDDLE
NECK
Optional
DPDT
Neck & Middle Neck
Switch
Ground
Ground
Ground
Hot Hot Hot Tone
Vol 4 1
(B)
c 5 2
Middle 6 3 Bridge+Neck
(M) (or option for 3 x pu.s)
(Sleeve)
Note Vertical Orientation!
(N)
Model No:-
3X3-03 Free-Way Switch HHH 1V/1T
REVERSE VIEW OF PICKUPS, SWITCH AND POTENTIOMETERS.
Notes:-
HUMBUCKER COLOUR KEY
Push/Pull DPDT switch affect positions 2,3 & 6 where Bridge pickup
is a humbucker with the pot 'in' and a single coil with the pot 'out'.
1 NORTH Start wire
BRIDGE
MIDDLE
Push/Pull pot voices the 'slug' coil when pot is out.
NECK
Grd To Bridge
'Ground'
'Ground'
'Hot'
'Hot'
(SHIELD)
4 3 2 1
Push/Pull
Middle + Neck Neck
DPDT Switch
(Pull Out for
Single Coil
Bridge Pickup).
4 1
5 2
Vol Tone c Middle Bridge+Neck
6 3
(P/P for Single Coil Bridge)
(Sleeve)
Any solder points
shown in between
pads are meant to
abridge both pads
Bridge+Middle Bridge
(P/P for Single Coil Bridge) (P/P for Single Coil Bridge)
Note Vertical Orientation!
(Tip)
Scheme No 057 : Last Updated March 2014
Model No:-
3X3-03 Free-Way Switch HSS + P/P Coil Split 1V/1T
REVERSE VIEW OF PICKUPS, SWITCH AND POTENTIOMETERS.
Notes:-
BRIDGE
MIDDLE
HUMBUCKER COLOUR KEY Positions 1, 2 & 3 are standard neck/both/bridge humbucker settings,
NECK
positions 4, 5 & 6 are like the middle positions of a 5-way selector.
1 NORTH Start wire
Push/Pull switch coil splits all pickups.
2 NORTH Finish wire
3 SOUTH Finish wire
4 SOUTH Start wire The colour coding or magnetic polarity shown here does not represent
any particular pickup manufacturer - please follow key.
Grd To Bridge
(SHIELD)
(SHIELD)
(SHIELD)
4 3 2 1 4 3 2 1 4 3 2 1
Neck
4 1
c
Keep all wires as short as possible
(use shielded cable where longer)
(Sleeve)
Bridge
Note Vertical Orientation!
Model No:-
3X3-03 Free-Way Switch HHH + Master Coil Split 1V/1T
REVERSE VIEW OF PICKUPS, SWITCH AND POTENTIOMETERS.
Notes:-
HUMBUCKER COLOUR KEY
Positions 1, 2 & 3 are neck/both/bridge settings (where the humbucker
is tapped in position 2). Positions 4, 5 & 6 are like the middle
1 NORTH Start wire positions of a 5-way selector.
BRIDGE
MIDDLE
NECK
'Ground'
'Ground'
'Hot'
'Hot'
(SHIELD)
1 2 3 4
c
P
4 1
5 2
Vol Tone Middle Bridge+Neck
6 3
S M only M x Neck S/C + B
DPDT Switch
(Sleeve)
Any solder points
shown in between
pads are meant to
abridge both pads
Note Vertical Orientation! Bridge + Middle Bridge
MxB MxB
(Tip)
Scheme No 129 : Last Updated Aug 2015
Model No:-
3X3-03 Free-Way Switch SSH + Series/Parallel Switch 1V/1T
REVERSE VIEW OF PICKUPS, SWITCH AND POTENTIOMETERS.
Notes:-
HUMBUCKER COLOUR KEY
BRIDGE
MIDDLE
NECK
'Ground'
'Hot'
'Hot'
Grd To Bridge
(SHIELD)
1 2 3 4
Neck
Push/Pull
DPDT Switch
(Pull for coil
split middle
pick-up).
Note Vertical Orientation!
4 1
5 2
Vol Tone
Any solder points 6 3
shown in between
pads are meant to
abridge both pads c
(Sleeve)
(Tip)
Scheme No 135 : Last Updated Sept 2015
Model No:-
3X3-03 Free-Way Switch SHS + Coil Split 1V/1T