Professional Documents
Culture Documents
Thank you for purchasing of this Watch. Your To get the most of your purchase, it is
Watch features electronic sensors which advisable to use this Watch in conformity with Hold
measures and shows the outdoor conditions: the below notes: [S]
[M]
weather forecast, temperature, air pressure, - Be sure to carefully read this manual and [S]
altitude and compass directions. keep it on hand for later reference when
Your Watch also provides the essential necessary.
information about your body during exercise, - Avoid exposing your Watch to extreme
like walking steps, traveling speed, distance, conditions for an unreasonable time.
Compass Alarm Mode Timer Mode
etc. - Avoid rough usages or severe impacts to
Mode
Your Watch also includes current time, daily your Watch.
[S] [M] [M]
alarm, timer and world time function. - Do not open the Watch’s case unless a
certified service agency because your
Watch contains precise electronic sensors
and components.
[S] [M]
- Clean your Watch with a soft cloth occasion-
ally that working for a longer use life of your
watch.
[S]
- Keep your Watch away from magnets or the
appliances which contains magnetic
objects such as mobile phones, speakers Barometer Trip Mode Current Time World Time
and motors. Mode Mode Mode
- Store your Watch in a dry place when it is
Sensor Mode Timekeeping Mode
not in use.
4.2 Current Time Mode - Setting the Current Time 5.1 Daily Alarm Mode - Setting the Alarm
How to Set Current Time Digits have been How to Set the Alarm 1 and Alarm 2
- To select the setting display, press and hold selected (flashing)
Current - To select the setting display, hold the [M] button
the[M] button for about 2 seconds in Current
Time Mode Time Mode. In setting display, the flashing for about 2 seconds in Alarm 1 (2) Display,
"SET" icon will appear. then the flashing “SET” icon will appear.
Hold [M] Hold [M] - In setting display, press the [M] button to - In setting display, press the [M] button to change
change the selection following the adjacent the selection between minute and hour.
Current Time Setting Sequence. - When the digits are flashing (selected),
[M] press the [S/S] or [L/R] button to increase /
Date Hour - When the digits are flashing (selected), press
Time Zone Daily Alarm 1 Display Setting Display decrease the number. (Hold down the button
Format Format the [S/S] or [L/R] button to increase /
[M] [M] [M] decrease the number. (Hold down the button hold hold change the number at a higher speed).
change the number at a higher speed). [M] [M] - When the set is completed, press and hold
Day DST
Second - When the setting is completed, press and hold
On/Off the [M] button to exit the setting display.
[M] [M] [M] [M] the [M] button to exit the setting display.
6.1 Trip Mode - Using the Trip function 6.3 Trip Mode - Trip Record Recall ( Highest peak record)
Peak How to Start/Stop Trip Mode
Point
Highest Peak record
Trip - The watch has a built-in 3-axis accelerometer sensor which
- Max 10 highest Peak record can be recall.
Trip Point monitors and records your physical activity. One of the 3
Point types (Steps, Distance and Calories) can be selected as - In Trip Mode - Record View display, Press and hold [M] to enter
Peak
Point the trip goal and display on the watch. Trip Record Recall Mode, Press [M] to enter highest peak record.
- In Trip Mode, press [S/S] to start. Press [S/S] once again to Press [L/R] to select between 1 - 10 highest peak record.
Trip
Start Trip
Point stop. - In Highest Peak Record view, press [S/S] to select between time
Point date stamp and altitude view.
- When Trip Mode start “ ” will appear and “ ”
Stop Trip Mode Trip Mode To Reset Highest Peak Record
icon will start flashing.
Distance View Record View
Date Date - During the Trip, Highest Peak point will save to peak record - In Highest Peak Record View, Press and Hold [L/R] to reset Peak
Display Display
automatically when Trip mode is activated. records.
100% 10% [L/R]
How to Reset Trip Mode Peak
90% 20% Hold Hold Peak
- When Trip Mode is stopped, press and hold [L/R] to reset. [M] [M] Peak Point
Point
....
1
- All the previous Trip record data will be erased. No. 2
Trip Record
[S/S] [M] [S/S]
[L/R]
Altitude Trip Trip
Lap Time Lap Avg. Speed Point Point ....
1 Total
2 Total Total Total
Trip
Point Step View Distance View Calories Burnt
[L/R] [L/R] View
Data
No. of [L/R]
Point Trip Point Data
Lap Step View Lap Distance View Lap Calories View - In Total Trip point data view, press [L/R] to select between Total Step / Total Distance / Total
Calories view
Trip Point Data view - Press [M] to exit Total trip point data view
- Press and hold [M] to exit trip recall mode
6.4.1 Trip Mode - Trip Record Recall ( Trip Point Data ) 7.0 Barometer Mode- Function Display
cursor moving direction Functional Display
Trip - The Barometer Mode includes 3 kinds of
Point [L/R] Functional display:
- Current Temperature Display
Trip Trip Flashing - Sea Level Pressure Display
Point Point
Trip - Sea Pressure Chart Display
Last 23hr record
Point - Press and hold [S/S] to select Temperature / Baro
Sea Pressure History Display Unit:
inHg inHg
[S/S] [L/R]
Barometer setting N
- In Barometer mode, press and hold [M] to enter object D
Marks Compass Directions Compass Bearing
setting mode. Press [M] to select among the NW N N North 349° - 11°
settings.
NNE North Northeast 12° - 33°
- When Storm alert is ON, 30 second beep alert E
object B NE Northeast 34° - 56°
Barometer Mode will be given and “ ” will shown in Current point
Current Temperature display ENE East Northeast 57° - 78°
and World time mode when the watch predicts A
the upcoming weather is stormy. SE E East 79° - 101°
Hold [M] ESE East Southeast 102° - 123°
- Before calibrate the sea level pressure, consult
Compass Directions object C SE Southeast 124° - 146°
the nearest observatory to get the sea and air
pressure of your current position. SSE South Southeast 147° - 168°
Storm Alert [M] Factory Default
Important: Storm alert is triggered when pressure S South 169° - 191°
angular 0° South Southwest 192° - 213°
[M] [M] drops quickly with a certain period of time. But SSW
difference SW Southwest 214° - 236°
sometimes, a very fast pressure changes maybe object D 0°
Sea Pressure [M] Air Pressure due to altitude changes. This pressure changes 315° WSW West Southwest 237° - 258°
Calibration Calibration due to altitude variation may result in exactly the W West 259° - 281°
same pattern as storm altert false alarm may 90° WNW West Northwest 282° - 303°
Barometer Setting Sequence occur. point object B NW Northwest 304° - 326°
Note: A NNW North Northwest 327° - 348°
135°
[S/S] / [L/R] Hold [S/S] / [L/R] - Input an incorrect pressure during the
Increase/ adjustment procedure may results an incorrect
Increase/Decrease Compass Bearings object C
Decrease the number at a pressure reading in the future.
the number higher speed NOTE:
- This Watch includes both compass directions and compass bearings.
8.0 Compass Mode - Tips and Precautions 8.2 Compass Mode - Compass Display
8.4 Compass Mode - Calibrating the Compass 8.6 Compass Mode - Magnetic Declination at Major Cities
Calibration Display
- In Compass Mode, press and hold [M] to enter
Compass Calibration display
- To start rotation calibration, press [S/S] button once.
The pointers will start rotating, turn the watch ( keep
parallel to the horizon) in the same direction of the
Compass Mode
rotation pointers for more than 2 turns.
Hold [M] Hold [M]
- Press [S/S] or [L/R] button to stop the calibration when
the 2-turn rotation calibration is completed.
[M] - When the pointer stop rotation, hold [M] button to back
to the Compass Mode or press [M] button once to set
the magnetic declination.
turn
turning axis
Rotation Calibration
Completed
Start Display
'Rotation' Process
Compass Calibration
8.7 Compass Mode - Magnetic Declination Mode 9.1 World Time Mode - City Initial Code Table
What is Magnetic Declination
- Check the “Magnetic Declination at Major Cities”
to get the magnetic declination of the city which is 1. ADL 11.BRU 21.DE N 31. KHI 41.NOU 51.SIN
Adelaide Brussels Denver Karachi Noumea Singapore
close to your current position. That angle will be
inputted into the Watch during the calculation. 2. AKL 12. BUE 22.DUB 32. LAX 42. NYC 52. STO
- In Compass Calibration display, press [M] to enter Auckland Buenos Aires Dublin Los Angeles New York Stockholm
6. BCN 16. CHI 26. HKG 36. LUX 46. ROM 56. VIE
Rotation Calibration Magnetic Declination Barcelona Chicago Hong Kong Luxembourg Rome Vienna
Stop Display Display
7. BER 17. CPH 27. HNL 37. MEL 47. SCL 57. YTO
Berlin Copenhagen Honolulu Melbourne Santiago Toronto
[S/S] / [L/R]
Increase/Decrease 8. BJS 18. CPT 28. IST 38. MEX 48. SEL 58. YVR
Beijing Cape Town Istanbul Mexico Seoul Vancouver
the number
9. BKK 19. DAC 29. JKT 39. MNL 49. SF O 59. ZRH
Hold [S/S] / [L/R] Bangkok Dhaka Jakarta Manila San Francisco Zurich
Increase/Decrease the
10. BOM 20. DEL 30. JRS 40. MOW 50. SHA 60. MY CITY
number at a higher speed Mumbai New Delhi Jerusalem Moscow Shanghai Selectable
9.0 World Time Mode - Function Display 9.2 World Time Mode - Setting
[L/R] [S/S]
[L/R] 3
User [L/R] [L/R]
Preset 45min 15min
Defined 2. Multiple Countdown
Timer 3 2 2 1 Zero
Current Target Time Setting Sequence
Time [S/S] [S/S] [S/S] [S/S] Beep
[L/R] [L/R]
Timer Mode 3
3 2 1 0
time
[S/S]
(minute)
NOTE: Single and Multiple Countdown
10.1 Timer Mode - Setting the User Target Time 11.0 Power Saving Mode
[S/S] / [L/R] Hold [S/S] / [L/R] Current Time How to enter/exit the Power Saving Mode
Current
Mode - To enter the Power Saving Mode, hold down the [L/R]
Time
Timer Mode Increase/Decrease Increase/Decrease the button in Current Time Mode for about 5 seconds and the
the number number at a higher speed Any Hold LCD display will be turned Off.
Button [L/R]
- Press any Button in Power Saving Mode to exit this mode
and the LCD display will be resumed.
NOTE:
- The setting range is up to 99 hours 59 minutes 59 seconds.
Power Saving
Mode
12.0 Battery - Low Battery Indication 13.1 Specifications - Sensor Mode