Professional Documents
Culture Documents
2011
See P.65
2. Disconnect the connector [1].
[3] [1] 3. Remove four screws [2], and remove
the developing motor [3].
NOTE
• When installing the motor, try to
insert it straight, and take care not
to damage the gears.
4. To reinstall, reverse the order of
removal.
[2]
A121F2C043DA
[3] [2]
A121F2C044DA
[1] [2]
A121F2C045DA
70
Field Service Ver. 3.0 Feb. 2011 7. OTHER MAINTENANCE ITEM
bizhub C35
Section Part name Ref.Page
Tray1 Tray1 feed roller P.91
Tray2 Tray2 feed roller P.91
ADF ADF feed roller P.92
Processing section Laser irradiation section P.92
MAINTENANCE
remove the front door [2].
[2]
A121F2C004DA
[1]
A121F2C005DA
43
Field Service Ver. 3.0 Feb. 2011 7. OTHER MAINTENANCE ITEM
bizhub C35
See P.43
2. Detach the spring from two hooks
[1].
[1]
A121F2C033DA
MAINTENANCE
4. Disconnect the flat cable [3], and
remove the high voltage unit [4].
[3]
65
7. OTHER MAINTENANCE ITEM Field Service Ver. 3.0 Feb. 2011
7.4.6 ADF
bizhub C35
CAUTION
• Turn OFF the main power and then wait 15 seconds or more before dis-
connecting the connector from the DF control board.
[1]
1. Open the ADF feed cover [1].
MAINTENANCE
A121F2C528DA
[2]
A121F2C010DA
[1]
A121F2C011DA
46
7. OTHER MAINTENANCE ITEM Field Service Ver. 3.0 Feb. 2011
See P.43
2. Slide out the tray 2.
3. Open the front cover.
4. Remove the cover [1].
[1]
A121F2C543DA
MAINTENANCE
[1] [1]
A121F2C006DA
[1] A121F2C007DA
44
7. OTHER MAINTENANCE ITEM Field Service Ver. 3.0 Feb. 2011
7.4.11 Tray2
1. Pull out the tray 2 [1].
bizhub C35
[1]
A121F2C021DA
MAINTENANCE
[1]
A121F2C543DA
54
Field Service Ver. 3.0 Feb. 2011 7. OTHER MAINTENANCE ITEM
bizhub C35
[1]
MAINTENANCE
[2]
A121F2C544DA
[1]
[1] [3]
A121F2C022DA
55
7. OTHER MAINTENANCE ITEM Field Service Ver. 3.0 Feb. 2011
See P.43
2. Remove the left cover.
See P.44
3. Remove the hard disk.
See P.54
4. Remove seventeen screws [1], and
[1] [1] remove the board protective shield
[2].
A121F2C023DA
[1]
[2] A121F2C024DA
56
Field Service Ver. 3.0 Feb. 2011 7. OTHER MAINTENANCE ITEM
bizhub C35
See P.43
2. Remove the left cover.
See P.44
3. Remove the hard disk.
See P.54
4. Remove the FAX board.
See P.56
5. Remove the ADF.
See P.46
6. Remove the operation panel lower
[1] cover [1].
MAINTENANCE
A121F2C008DA
[2]
A121F2C015DA
A121F2C016DA
51
7. OTHER MAINTENANCE ITEM Field Service Ver. 3.0 Feb. 2011
[3]
10. Pull the flat cables [1] out of the
guide.
bizhub C35
[1]
A121F2C018DA
52
7. OTHER MAINTENANCE ITEM Field Service Ver. 3.0 Feb. 2011
See P.43
2. Slide out the tray 2.
3. Open the front cover.
4. Remove the cover [1].
[1]
A121F2C543DA
MAINTENANCE
[1] [1]
A121F2C006DA
[1] A121F2C007DA
44