Professional Documents
Culture Documents
Vo=Vi
Op-amp Non-Inverting amplifier
𝑉𝑖
R2 =
𝐼1
𝑉𝑜
R1 =
𝐼1
Or
Formulae to Find output voltage in case of CMRR, Input Voltage and Closed loop gain
Given
Slew Rate
Some Commonly used Relationships in Capacitor Coupled & Directly Coupled Circuits
I1 >> IB(max)
I2 >>IB(max)
I1 =100 IB(max)= I2
Direct Coupled Non-Inverting amplifier
I1 >> IB(max)
I2 >>IB(max)
I1 =100 IB(max)= I2
Direct Coupled Inverting amplifier
XC1=R1/10
Rest of the formulae are same as that of Capacitor Coupled Voltage Follower
XC1=R1/10
XC2=R3
XC3=RL
I1=I2= IB(max)
XC1=R1
XC2=RL/10
Capacitor Coupled Voltage follower using Single polarity supply
I2>> IB(max)
I2 = 100 IB(max)
High Zin Capacitor Coupled Voltage follower using Single polarity supply
XC1=R3
XC3=RL/10
XC2=(R1||R2)/10
Capacitor Coupled Non-Inverting amplifier Using Single Polarity
XC1=R1/10
XC2=RL
R1 and R2 are found using same formulae using Vi and I1 and Vo and I2
Output voltage swing of opamp is given by
OR
Differentiating Circuits
R1=R2/20
Integrating Circuits