Professional Documents
Culture Documents
Anexo D
Anexo D
1. Información general
1.1. Los Acoplamientos Omega están diseñados para proporcionar una conexión mecánica entre los ejes rotativos del equipo
mecánico, mediante un elemento torsionalmente flexible para aceptar desalineaciones y transmitir la potencia y el torque entre
los ejes.
1.2. Estas instrucciones pretenden ayudarle a instalar y mantener su acoplamiento Omega. Lea estas instrucciones antes de instalar
el acoplamiento y antes de dar mantenimiento al acoplamiento y al equipo conectado. Conserve estas instrucciones cerca de la
instalación del acoplamiento y disponibles para la revisión del personal de mantenimiento.
1.3. Rexnord Industries, LLC es propietario del copyright de este material. Estas instrucciones de instalación y mantenimiento no se
pueden reproducir en su totalidad ni parcialmente para fines de la competencia.
1.4. Descripciones de los símbolos:
3. Mantenimiento preventivo
¡PELIGRO!
Evite el contacto con el acoplamiento cuando esté girando y/o en funcionamiento.
3.1. Es necesaria una inspección visual periódica para evaluar la condición del elemento flexible. La inspección se puede realizar
durante el funcionamiento con una luz estroboscópica.
3.2. Durante la inspección busque:
• Grietas de fatiga en las divisiones de los elementos, decoloración y grietas en la superficie del cuerpo del elemento.
¡ATENCIÓN! Reemplace el elemento de ser necesario.
La designación ATEX (atmósferas explosivas) se estableció para las instrucciones nuevas. ATEX 100a controla todos
los reglamentos para la condición de equipo a prueba de explosiones.
360º
∆Ka = (b-a)
∆Ka = _____________
A
PASO 2
r
∆Kr __________ pulg.
360
¡ATENCIÓN! La alineación inadecuada del equipo o los cubos podría provocar el contacto y chisporroteo del cubo.
PASO 3
∆Ka — vea el Paso 1
∆Ka ∆Kr ∆Kr — vea el Paso 2
+ ≤ 1
∆Ka máx. ∆Kr máx. ∆Ka máx. y ∆Kr máx. — vea la Tabla 2
PASO 2
Tipo E Tipo ES
7.7. Monte la primera mitad del elemento en los cubos
con los tornillos proporcionados.
7.8. Gire el eje 180 grados y fije la segunda mitad del
elemento.
7.9. Si no puede girar el eje, monte las dos mitades
del elemento a 90 grados.
PASO 3
7.10. Apriete todos los tornillos al torque especificado Tipo E Tipo ES
en la Tabla 3.
7.11. Alinee el equipo. Tabla 3 — Torque de los tornillos de fijación*
Torque de apriete — Seco
7.12. Instale las guardas adecuadas antes de Tamaño Tamaño
Tamaño Cant. (libras- (libra-
arrancar el equipo. N-m (pulg.) de la llave
pulgadas) pies)
¡ATENCIÓN! Al instalar el elemento, primero 2 8 + 8** 204 17 23 1/4-20 x 3/8"
ajuste todos los tornillos con un torque ligero, 3 8 + 8** 204 17 23 1/4-20 x 1/2"
luego apriete todos los tornillos de cabeza al 4 8 + 8** 204 17 23 1/4-20 x 1/2" 7/16"
torque adecuado con un torquímetro. 5 8 + 8** 204 17 23 1/4-20 x 1/2"
10 12 + 12** 204 17 23 1/4-20 x 1/2"
15 12 288 24 33 5/16-18 x 1/2" 1/2"
20 12 360 30 40 3/8-16 x 5/8"
8. Torque de los tornillos de fijación 30 12 360 30 40 3/8-16 x 5/8"
9/16"
40 16 360 30 40 3/8-16 x 5/8"
8.1. No lubrique las roscas de los tornillos. 50 16 360 30 40 3/8-16 x 5/8"
8.2. Los tornillos deben tener un adhesivo fijante 60 16 900 75 100 1/2-13 x 7/8"
en la rosca. 70 16 900 75 100 1/2-13 x 7/8" 3/4"
80 16 900 75 100 1/2-13 x 7/8"
8.3. Apriete los tornillos con un torquímetro. 100 20 3,240 270 370 3/4-10 x 1-1/2"
1-1/8"
120 24 3,240 270 370 3/4-10 x 1-1/2"
¡ATENCIÓN! No lubrique las roscas de
140 32 7,080 590 800 1.0-8 x 1-1/2" 1-1/2"
los tornillos.
*Los tornillos vienen suministrados con adhesivo fijante en la rosca, el cual no
debe lubricarse ni reusarse más de dos veces.
**Se han suministrado tornillos adicionales proporcionados para acoplamientos
del espaciador con anillos.
Ambos cubos montados hacia Un cubo montado hacia Ambos cubos montados hacia
el interior. el exterior. el exterior.
Un cubo montado hacia
el interior.
Bujes QD
11
www.intermec.com.co
Con el flanche del buje por atrás y los tornillos de Con el flanche y los tornillo de apriete hacia el
apriete hacia el frente. frente.
12
www.intermec.com.co
Bujes taper
13
1 2 3 4 5 6 7 8
25,56
[1.01 ]
109,09 105,42 DIN LATCH CLOSED
[4.15 ] DIN LATCH OPEN
[4.29 ] 22
[.87 ]
D
66,2
[2.61 ]
E
72,39
[2.85 ] 68,99
[2.72 ]
71,65
[2.82 ]
D 10001306338 00
Drawn by: SREDDY2 Date: SEP-09-2014
Technical Data
Original Instructions
Topic Page
Summary of Changes 2
Power Compact 5000 I/O Modules 2
Digital I/O Modules 3
Analog I/O Modules 50
Safety I/O Modules 82
5069-HSC2xOB4 High-speed Counter Module 101
5069-SERIAL Serial Module 110
5069-FPD Field Potential Distributor 118
5069-ARM Address Reserve Module 122
5069-AENTR and 5069-AENTRK EtherNet/IP Adapters 125
5069-AEN2TR EtherNet/IP Adapter 130
Minimum Spacing Requirements 134
Additional Resources 137
The Compact 5000™ I/O architecture provides a wide range of input and output modules to span many applications, from high-speed digital
to process control. The architecture uses Producer/Consumer technology that allows input information and output status to be shared
among multiple Logix 5000™ controllers.
Compact 5000 I/O modules are used as local I/O modules in CompactLogix™ 5380 and Compact GuardLogix® 5380 controller systems. The
modules are also used as remote I/O modules with CompactLogix 5380, Compact GuardLogix 5380 controllers, and some other Logix 5000
controllers. You use the Studio 5000 Logix Designer® application to configure the modules.
The I/O modules require a removable terminal block (RTB) to connect field-side wiring. RTBs are not included with the I/O modules. You must
order RTBs separately.
Compact 5000 I/O Modules and EtherNet/IP Adapters Technical Data
Summary of Changes
The publication was revised for the following changes.
Topic Pages
Changed the 5069-OB16, 5069-OB16F, and 5069-OB16K module specifications to indicate that only the Series B hardware supports Field 30
Power Loss Detection.
Changed the 5069-IY4 and 5069-IY4K module wiring diagrams with different devices that are connected to the module. 59, 60, 64, and 65
Changed the 5069-IB8S and 5069-IB8SK module wiring diagrams to show normally closed contacts, instead of normally open contacts, 82…84
which are connected to the module.
For more information on MOD power, SA power, and LA power, see the user manuals that are listed in Additional Resources on page 137.
The following figure shows a wiring diagram for the 5069-IA16 module.
Channel Connections
The diagram shows devices that are connected to channels 0, 2, 4, 6, 8,
and 10. You are not restricted to using only those channels.
You can connect devices to any channel or combination of channels as
needed.
SA Power
Connections to an external power supply that provides SA Power via the
SA Power RTB on one of the following: Input Channel 0 0
• CompactLogix 5380 controller Input Channel 1 1
• CompactLogix 5480 controller
Input Channel 2 2
• 5069-AENTR or 5069-AEN2TR EtherNet/IP™ adapter
• 5069-FPD field potential distributor Input Channel 3 3
IMPORTANT: Remember the following: Input Channel 4 4
• The 5069-IA16 module uses AC SA power. You must connect AC Input Channel 5 5
power to the component, that is, CompactLogix 5380 controller,
Input Channel 6 6
adapter, or field potential distributor, that provides SA Power to the
module. Input Channel 7 7
The following figure shows a functional block diagram for the 5069-IA16 module.
Module 24V DC
Status Power Supply
Indicators MOD 5
Power 0
6
SA Power AC (+) 9
Backplane
Input Communication
B
Current Limiting Backplane a
Isolation c
Input Circuits ASIC Nonvolatile
k
Memory
p
Input l
a
n
e
SA Power AC (–)
SA Power AC (+)
5069-RTB18-SPRING connections 0.5…1.5 mm2 (22…16 AWG) solid or stranded shielded copper wire rated at 105 °C (221 °F), or greater, 2.9 mm (0.11 in.)
max diameter including insulation, single wire connection only.
5069-RTB18-SCREW connections 0.5…1.5 mm2 (22…16 AWG) solid or stranded shielded copper wire rated at 105 °C (221 °F), or greater, 3.5 mm (0.14 in.)
max diameter including insulation, single wire connection only.
Insulation stripping length
5069-RTB18-SPRING connections 10 mm (0.39 in.)
5069-RTB18-SCREW connections 12 mm (0.47 in.)
Weight, approx 175 g (0.39 lb)
Enclosure type rating None (open-style)
North American temp code T4
ATEX temp code T4
IECEx temp code T4
IEC Input Compatibility Type 1
(1) Level of MOD Power current that passes through the module depends on the system configuration, such as, module slot location and the other module types that are used in the system. For
more information, see the CompactLogix 5380 and Compact GuardLogix 5380 Controllers User Manual, 5069-UM001, CompactLogix 5480 Controllers User Manual, 5069-UM002, and Compact
5000 EtherNet/IP Adapters User Manual, 5069-UM004.
(2) Level of SA Power current that passes through the module depends on the system configuration, such as, module slot location and the other module types that are used in the system. For
more information, see the CompactLogix 5380 and Compact GuardLogix 5380 Controllers User Manual, 5069-UM001, CompactLogix 5480 Controllers User Manual, 5069-UM002, and Compact
5000 EtherNet/IP Adapters User Manual, 5069-UM004.
Jp
Certifications - 5069-IA16
Certification(1) 5069-IA16
UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
c-UL-us UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
CE • EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2014/35/EU LVD, compliant with:
• EN 61010-2-201; Control Equipment Safety Requirements
European Union 2011/65/EU RoHS, compliant with:
• EN 50581; Technical documentation
Australian Radiocommunications Act, compliant with:
RCM
• EN 61000-6-4; Industrial Emissions
European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
Ex • EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• DEMKO 15 ATEX 1484X
IECEx System, compliant with:
• IEC 60079-0; General Requirements
IECEx • IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• IECEx UL 15.0055X
Korean Registration of Broadcasting and Communications Equipment, compliant with:
KC Article 58-2 of Radio Waves Act, Clause 3
Russian Customs Union TR CU 020/2011 EMC Technical Regulation
EAC Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
The following figure shows a wiring diagram for the 5069-IB16, 5069-IB16K, and 5069-IB16F modules.
SA Power 5069-IB16
Connections to an external power supply that provides SA power via the
SA Power RTB on one of the following:
• CompactLogix 5380 controller Input Channel 0 0
• Compact GuardLogix 5380 controller Input Channel 1 1
• CompactLogix 5480 controller
Input Channel 2 2
• 5069-AENTR or 5069-AEN2TR EtherNet/IP Adapter 2-wire
• 5069-FPD field potential distributor Sensor Input Channel 3 3
• The 5069-IB16, 5069-IB16K, and 5069-IB16F modules use DC SA power. Input Channel 5 5
You must connect DC power to the component, that is, controller, DC (+) 3-wire Input Channel 6 6
adapter, or field potential distributor, that provides SA Power to the Sensor
DC (–) Input Channel 7 7
modules.
• The 5069-IB16, 5069-IB16K, and 5069-IB16F module inputs use a shared Input Channel 8 8
common. The inputs have a return through internal module circuitry to Input Channel 9 9
the SA (–) terminal on the SA Power RTB. Input Channel 10 10
• If you install modules in a system that use AC SA power and DC SA
Input Channel 11 11
power, you must install them on separate SA power buses.
• You use a 5069-FPD field potential distributor to establish a new SA Input Channel 12 12
Power bus in a system. SA Power buses are isolated from each other. Input Channel 13 13
To keep the modules on separate SA Power buses, complete these Input Channel 14 14
steps.
Input Channel 15 15
1. Install the modules that use one type of SA power, for example DC,
to the right of the adapter or controller, that is, the first SA No Connect 16
The following figure shows a functional block diagram for the 5069-IB16, 5069-IB16K, and 5069-IB16F modules.
Module 24V DC
Status Power Supply
Indicators MOD 5
Power 0
6
DC (+) 9
Backplane
Input Communication
B
Current Limiting Backplane a
Isolation c
Input Circuits ASIC Nonvolatile
k
Memory
p
Input l
Transient a
Suppression n
e
SA Power DC (–)
SA Power DC (+)
5069-RTB18-SPRING connections 0.5…1.5 mm2 (22…16 AWG) solid or stranded shielded copper wire rated at 105 °C (221 °F), or greater, 2.9 mm (0.11 in.)
max diameter including insulation, single wire connection only.
5069-RTB18-SCREW connections 0.5…1.5 mm2 (22…16 AWG) solid or stranded shielded copper wire rated at 105 °C (221 °F), or greater, 3.5 mm (0.14 in.)
max diameter including insulation, single wire connection only.
5069-RTB18-SPRING connections: 10 mm (0.39 in.)
Insulation stripping length 5069-RTB18-SCREW connections: 12 mm (0.47 in.)
Weight, approx 175 g (0.39 lb)
Enclosure type None (open-style)
North American temp code T4
ATEX/IECEx temp code T4
IECEx temp code T4
(1) Level of MOD Power current that passes through the module depends on the system configuration, such as, module slot location and the other module types that are used in the system. For
more information, see the CompactLogix 5380 and Compact GuardLogix 5380 Controllers User Manual, 5069-UM001, CompactLogix 5480 Controllers User Manual, 5069-UM002, and Compact
5000 EtherNet/IP Adapters User Manual, 5069-UM004.
(2) Level of SA Power current that passes through the module depends on the system configuration, such as, module slot location and the other module types that are used in the system. For
more information, see the CompactLogix 5380 and Compact GuardLogix 5380 Controllers User Manual, 5069-UM001, CompactLogix 5480 Controllers User Manual, 5069-UM002, and Compact
5000 EtherNet/IP Adapters User Manual, 5069-UM004.
(3) Use this Conductor Category information for planning conductor routing. See the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
CE • EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2014/35/EU LVD, compliant with:
• EN 61010-2-201; Control Equipment Safety Requirements
European Union 2011/65/EU RoHS, compliant with:
• EN 50581; Technical documentation
Australian Radiocommunications Act, compliant with:
RCM EN 61000-6-4; Industrial Emissions
European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
Ex • EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• DEMKO 15 ATEX 1484X
IECEx System, compliant with:
• IEC 60079-0; General Requirements
IECEx • IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• IECEx UL 15.0055X
Korean Registration of Broadcasting and Communications Equipment, compliant with:
KC Article 58-2 of Radio Waves Act, Clause 3
Russian Customs Union TR CU 020/2011 EMC Technical Regulation
EAC Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
The following figure shows a wiring diagram for the 5069-IB6F-3W module.
Channel Connections
The diagram shows devices that are connected to channels 0
and 2. You are not restricted to using only those channels.
DC INPUT
You can connect devices to any channel or combination of
channels as needed.
5069-IB6F-3W
SA Power
Connections to an external power supply that provides SA power Input Channel 0 0
are made via the SA Power RTB on one of the following: 3-wire SA+ (24V DC) 1
• The 5069-IB6F-3W module uses DC SA power. You must SA+ (24V DC)
2-wire 7
connect DC power to the component, that is, controller,
Sensor SA- (24V DC Return) 8
adapter, or field potential distributor, that provides SA Power
to the module. Input Channel 3 9
• If you install modules in a system that use AC SA power and DC SA+ (24V DC) 10
SA power, you must install them on separate SA power buses. SA- (24V DC Return) 11
• You use a 5069-FPD field potential distributor to establish a
Input Channel 4 12
new SA Power bus in a system. SA Power buses are isolated
from each other. To keep the modules on separate SA Power SA+ (24V DC) 13
1. Install the modules that use one type of SA power, for Input Channel 5 15
example DC, to the right of the adapter or controller, that is,
SA+ (24V DC) 16
the first SA Power bus.
SA- (24V DC Return) 17
2. Install the 5069-FPD field potential distributor to establish a
second SA Power bus.
3. Install the modules that use the other type of SA power, for
example AC, on the second SA Power bus.
The following figure shows a functional block diagram for the 5069-IB6F-3W module.
Module 24V DC
Status
Power Supply
Indicators
MOD
5
Power
0
6
Backplane 9
Communication
Input B
Backplane a
Isolation
ASIC Nonvolatile c
Current Limiting
Prot DC (+) Transient Memory k
3-wire Input Circuits and
Suppression p
Sensor Protection
l
Prot DC (Return) a
n
e
SA Power DC (Return)
SA Power DC (+)
Certifications - 5069-IB6F-3W
Certification(1) 5069-IB6F-3W
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
CE • EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2014/35/EU LVD, compliant with:
• EN 61010-2-201; Control Equipment Safety Requirements
European Union 2011/65/EU RoHS, compliant with:
• EN 50581; Technical documentation
Australian Radiocommunications Act, compliant with:
RCM EN 61000-6-4; Industrial Emissions
European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
Ex • EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• DEMKO 15 ATEX 1484X
IECEx System, compliant with:
• IEC 60079-0; General Requirements
IECEx • IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• IECEx UL 15.0055X
Korean Registration of Broadcasting and Communications Equipment, compliant with:
KC Article 58-2 of Radio Waves Act, Clause 3
Russian Customs Union TR CU 020/2011 EMC Technical Regulation
EAC Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
The following figure shows a wiring diagram for the 5069-OA16 module.
Channel Connections
The diagram shows devices that are connected to channels
0, 4, 8, and 12. You are not restricted to using only those
channels.
You can connect devices to any channel or combination of
channels as needed.
SA Power
Connections to an external power supply that provides SA
Power via the SA Power RTB on one of the following: CR Output Channel 0 0
connected to it and install the 5069-OA16 module next to it. Output Channel 10 10
You cannot install modules that draw AC SA power next to a Output Channel 11 11
Compact GuardLogix 5380 controller. Compact GuardLogix CR Output Channel 12 12
5380 controllers do not support AC power on their SA Power
Output Channel 13 13
RTBs.
• The 5069-OA16 module outputs use a shared common. The Output Channel 14 14
The following figure shows a functional block diagram for the 5069-OA16 module.
Module 24V DC
Status
Power Supply
Indicators
MOD 5
Power 0
6
Backplane 9
Communication
Output
B
Output Backplane a
Isolation
Circuitry ASIC Nonvolatile c
Memory k
p
l
a
n
Isolation
e
Field Power Loss
Detection Circuitry SA+ (L1)
SA- (L2)
5069-RTB18-SCREW connections 0.5…1.5 mm2 (22…16 AWG) solid or stranded shielded copper wire rated at 105 °C (221 °F), or greater, 3.5 mm (0.14 in.)
max diameter including insulation, single wire connection only.
5069-RTB18-SPRING connections 0.5…1.5 mm2 (22…16 AWG) solid or stranded shielded copper wire rated at 105 °C (221 °F), or greater, 2.9 mm (0.11 in.)
max diameter including insulation, single wire connection only.
Insulation stripping length
5069-RTB18-SPRING connections 10 mm (0.39 in.)
5069-RTB18-SCREW connections 12 mm (0.47 in.)
Weight, approx 175 g (0.39 lb)
Enclosure type rating None (open-style)
North American temp code T4
ATEX temp code T4
IECEx temp code T4
(1) Level of MOD Power current that passes through the module depends on the system configuration, such as, module slot location and the other module types that are used in the system. For
more information, see the CompactLogix 5380 and Compact GuardLogix 5380 Controllers User Manual, 5069-UM001, CompactLogix 5480 Controllers User Manual, 5069-UM002, and Compact
5000 EtherNet/IP Adapters User Manual, 5069-UM004.
(2) Level of SA Power current that passes through the module depends on the system configuration, such as, module slot location and the other module types that are used in the system. For
more information, see the CompactLogix 5380 and Compact GuardLogix 5380 Controllers User Manual, 5069-UM001, CompactLogix 5480 Controllers User Manual, 5069-UM002, and Compact
5000 EtherNet/IP Adapters User Manual, 5069-UM004.
Certifications - 5069-OA16
Certification(1) 5069-OA16
UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
c-UL-us UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
CE • EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2014/35/EU LVD, compliant with:
• EN 61010-2-201; Control Equipment Safety Requirements
European Union 2011/65/EU RoHS, compliant with:
• EN 50581; Technical documentation
Australian Radiocommunications Act, compliant with:
RCM
• EN 61000-6-4; Industrial Emissions
European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
Ex
• II 3 G Ex nA IIC T4 Gc
• DEMKO 15 ATEX 1484X
When used at or below 125V DC or 30V DC
IECEx System, compliant with:
• IEC 60079-0; General Requirements
IECEx • IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• IECEx UL 15.0055X
Korean Registration of Broadcasting and Communications Equipment, compliant with:
KC Article 58-2 of Radio Waves Act, Clause 3
Russian Customs Union TR CU 020/2011 EMC Technical Regulation
EAC Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
The following figure shows a wiring diagram for the 5069-OB8 module.
Channel Connections
The diagram shows devices that are connected to channels
0 and 3. You are not restricted to using only those channels.
You can connect devices to any channel or combination of
channels as needed.
LA Power
The Local Actuator (LA+ and LA –) connections are used to CR Output Channel 0 0
supply field-side power to the module.
Output Channel 1 1
Output channels 0…3 use LA0 +/–, and output channels 4…7
use LA1 +/–. Output Channel 2 2
Output Channel 3 3
LA0 – 4
LA0 – 5
The 5069-OB8 module does not draw current from the SA LA0 – 6
power bus. – LA0 – 7
Still, the module is a DC-type module, and you must install it 24V DC
on a DC SA Power bus. + LA0 + 8
buses are isolated from each other. To keep the modules LA1 – 13
The following figure shows a functional block diagram for the 5069-OB8 module.
Module 24V DC
Status
Power Supply
Indicators
MOD 5
Power 0
6
Backplane 9
Communication
Output B
Output Backplane a
Isolation
Circuitry ASIC Nonvolatile c
Memory k
Inductive Kickback
p
Suppression
l
a
LAx + n
e
LAx -
5069-RTB18-SPRING connections 0.5…1.5 mm2 (22…16 AWG) solid or stranded shielded copper wire rated at 105 °C (221 °F), or greater, 2.9 mm (0.11 in.)
max diameter including insulation, single wire connection only.
5069-RTB18-SCREW connections 0.5…1.5 mm2 (22…16 AWG) solid or stranded shielded copper wire rated at 105 °C (221 °F), or greater, 3.5 mm (0.14 in.)
max diameter including insulation, single wire connection only.
Insulation stripping length
5069-RTB18-SPRING connections 10 mm (0.39 in.)
5069-RTB18-SCREW connections 12 mm (0.47 in.)
RTB torque (5069-RTB18-SCREW RTB only) 0.4 N·m (3.5 lb·in)
Weight, approx 175 g (0.39 lb)
Enclosure type rating None (open-style)
North American temp code T4
ATEX temp code T4
IECEx temp code T4
(1) Level of MOD Power current that passes through the module depends on the system configuration, such as, module slot location and the other module types that are used in the system. For
more information, see the CompactLogix 5380 and Compact GuardLogix 5380 Controllers User Manual, 5069-UM001, CompactLogix 5480 Controllers User Manual, 5069-UM002, and Compact
5000 EtherNet/IP Adapters User Manual, 5069-UM004.
(2) Level of SA Power current that passes through the module depends on the system configuration, such as, module slot location and the other module types that are used in the system. For
more information, see the CompactLogix 5380 and Compact GuardLogix 5380 Controllers User Manual, 5069-UM001, CompactLogix 5480 Controllers User Manual, 5069-UM002, and Compact
5000 EtherNet/IP Adapters User Manual, 5069-UM004.
Certifications - 5069-OB8
Certification(1) 5069-OB8
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
CE • EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2014/35/EU LVD, compliant with:
• EN 61010-2-201; Control Equipment Safety Requirements
European Union 2011/65/EU RoHS, compliant with:
• EN 50581; Technical documentation
RCM Australian Radiocommunications Act, compliant with: EN 61000-6-4; Industrial Emissions
European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
Ex • EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• DEMKO 15 ATEX 1484X
IECEx System, compliant with:
• IEC 60079-0; General Requirements
IECEx • IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• IECEx UL 15.0055X
Korean Registration of Broadcasting and Communications Equipment, compliant with: Article 58-2 of Radio Waves
KC Act, Clause 3
Russian Customs Union TR CU 020/2011 EMC Technical Regulation
EAC Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
The following figure shows a wiring diagram for the 5069-OB16, 5069-OB16K, and 5069-OB16F modules.
Channel Connections
The diagram shows devices that are connected to
channels 0, 2, 4, and 6. You are not restricted to using only
those channels. DC OUTPUT
You can connect devices to any channel or combination of
channels as needed.
5069-OB16
LA Power
The Local Actuator (LA+ and LA –) connections are used to
supply field-side power to the module. Output Channel 0 0
Output Channel 1 1
Output Channel 2 2
The following figure shows a functional block diagram for the 5069-OB16, 5069-OB16K, and 5069-OB16F modules.
Module 24V DC
Status
Power Supply
Indicators
MOD 5
Power 0
6
Backplane 9
Communication
Output
B
Output Backplane a
Isolation
Circuitry ASIC Nonvolatile c
Inductive Kickback Memory k
Suppression p
l
TB-16 a
n
LA+ e
Soft Start 24V DC to 5V DC
LA- Circuitry Converter
TB-17
Off-state leakage current per point, max(2) < 0.5 mA per point
0.5 A resistive per channel @ 10…32V DC
Output current rating 8 A resistive per module @ 10…32V DC, max
Surge current per point 1 A max for 10 ms per point, repeatable every 2 s
Output delay time (backplane to screw)
Off to On ≤ 100 µs, ±10 µs @ 25 °C (77 °F) @ 0.5 A 10 µs, ±1 µs @ 25 °C (77 °F) @ 0.5 A
On to Off ≤100 µs, ±10 µs @ 25 °C (77 °F) @ 0.5 A 10 µs, ±1 µs @ 25 °C (77 °F) @ 0.5 A
Pulse width, min 200 µs @ 0.5 A @ 25 °C (77 °F) 20 µs @ 0.5 A @ 25 °C (77 °F)
±100 ns/°C (55.6 ns/°F) from 0…60 °C (32…140 °F)
Output drift over temperature span ±10 ns/°C (5.56 ns/°F) from 0…60 °C (32…140 °F) @ 0.5 A
@ 0.5 A
The following figure shows a wiring diagram for the 5069-OW4I module.
Power
Supply 0A 0
SA Power
The 5069-OW4I module does not draw current from the SA 0B 1
power bus. 1A 2
Still, the module is a DC-type module, and you must install it 1B 3
on a DC SA Power bus. Load
2A 4
• If you install modules in a system that use AC SA power
and DC SA power, you must install them on separate SA 2B 5
Power buses. 3A 6
• You use a 5069-FPD field potential distributor to establish 3B 7
a new SA Power bus in a system. SA Power buses are
8
isolated from each other. To keep the modules on
separate SA Power buses, complete these steps. 9
16
17
The following figure shows a functional block diagram for the 5069-OW4I module.
24V DC
SA Power
5
0
6
9
Module 24V DC
Status B
Power Supply
Indicators a
MOD c
Power k
0A p
Backplane l
Communication a
0B n
Backplane e
ASIC
Nonvolatile
Memory
Certifications - 5069-OW4I
Certification(1) 5069-OW4I
UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
c-UL-us UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File
E194810.
European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
CE • EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2014/35/EU LVD, compliant with:
• EN 61010-2-201; Control Equipment Safety Requirements
European Union 2011/65/EU RoHS, compliant with:
• EN 50581; Technical documentation
Australian Radiocommunications Act, compliant with:
RCM EN 61000-6-4; Industrial Emissions
European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
Ex
• II 3 G Ex nA nC IIC T4 Gc
• DEMKO 15 ATEX 1484X
When used at or below 125V DC or 30V DC
IECEx System, compliant with:
• IEC 60079-0; General Requirements
• IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
IECEx
• II 3 G Ex nA nC IIC T4 Gc
• IECEx UL 15.0055X
When used at or below 125V DC or 30V DC
Korean Registration of Broadcasting and Communications Equipment, compliant with:
KC
Article 58-2 of Radio Waves Act, Clause 3
Russian Customs Union TR CU 020/2011 EMC Technical Regulation
EAC Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
The following figure shows a wiring diagram for the 5069-OW16 module.
The 5069-OW16 module requires SA power to function. The module is a DC-type module, so you must install it on an SA power bus that uses
DC-type power.
You can connect AC-type devices, DC-type devices, or, as shown below, a combination of the two types to the module. Because the module
has two commons, each shared across a set of eight output channels, make sure that you do not connect devices of different power types to
the same set of commons. For example, you cannot connect a device that uses AC-type power to output channel 0 and a device that uses
DC-type power to output channel 1.
Channel Connections
The example shows devices connected to channels 0, 2, 4, 6, 8,
10, 12, and 14. You are not restricted to using only those RELAY OUTPUT
channels.
You can connect devices to any channel or combination of
channels as needed.
5069-OW16
SA Power
Connections to an external power supply that provides SA power
are made via the SA Power RTB on one of the following: CR Output Channel 0 0
new SA Power bus in a system. SA Power buses are isolated CR Output Channel 10 11
from each other. To keep the modules on separate SA Power
Output Channel 11 12
buses, complete these steps.
1. Install the modules that use one type of SA power, for Output Channel 12 13
example DC, to the right of the adapter or controller, that Output Channel 13 14
is, the first SA Power bus. -24V DC
2. Install the 5069-FPD field potential distributor to establish Output Channel 14 15
The following figure shows a functional block diagram for the 5069-OW16 module.
SA Power
SA
5
Power
0
Supply
6
9
Module 24V DC
Status B
Power Supply
Indicators a
MOD c
Power k
Common x p
Backplane l
Communication a
Output Channel x n
Backplane e
ASIC Nonvolatile
Memory
Certifications - 5069-OW16
Certification(1) 5069-OW16
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
CE • EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2014/35/EU LVD, compliant with:
• EN 61010-2-201; Control Equipment Safety Requirements
European Union 2011/65/EU RoHS, compliant with:
• EN 50581; Technical documentation
Australian Radiocommunications Act, compliant with:
RCM
• EN 61000-6-4; Industrial Emissions
European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
Ex
• II 3 G Ex nA nC IIC T4 Gc
• DEMKO 15 ATEX 1484X
When used at or below 125V DC or 30V DC
IECEx System, compliant with:
• IEC 60079-0; General Requirements
• IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
IECEx
• II 3 G Ex nA nC IIC T4 Gc
• IECEx UL 15.0055X
When used at or below 125V DC or 30V DC
Korean Registration of Broadcasting and Communications Equipment, compliant with:
KC Article 58-2 of Radio Waves Act, Clause 3
Russian Customs Union TR CU 020/2011 EMC Technical Regulation
EAC Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
The following figure shows a wiring diagram for the 5069-OX4I module.
RELAY OUTPUT
Channel Connections
The diagram shows devices that are connected to channels
0 and 1. You are not restricted to using only those channels. Power
You can connect devices to any channel or combination of Supply
5069-OX4I
channels as needed.
Load (0 N.C.) 0
(0 N.O.) 1
SA Power (O COMMON) 2
The 5069-OX4I module does not draw current from the SA (1 N.C.) 3
power bus. Power
(1 N.O.) 4
Still, the module is a DC-type module, and you must install it Supply
on a DC SA Power bus. (1 COMMON) 5
The following figure shows a functional block diagram for the 5069-OX4I module.
24V DC
SA Power
5
0
6
9
Module 24V DC
Status B
Power Supply
Indicators a
MOD c
Power k
0 N.C. p
Backplane l
0 N.O. Communication a
n
Backplane e
0 COMMON
ASIC
Nonvolatile
Memory
Certifications - 5069-OX4I
Certification(1) 5069-OX4I
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
CE • EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2014/35/EU LVD, compliant with:
• EN 61010-2-201; Control Equipment Safety Requirements
European Union 2011/65/EU RoHS, compliant with:
• EN 50581; Technical documentation
Australian Radiocommunications Act, compliant with:
RCM EN 61000-6-4; Industrial Emissions
European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
Ex
• II 3 G Ex nA nC IIC T4 Gc
• DEMKO 15 ATEX 1484X
When used at or below 125V DC or 30V DC
IECEx System, compliant with:
• IEC 60079-0; General Requirements
• IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
IECEx
• II 3 G Ex nA nC IIC T4 Gc
• IECEx UL 15.0055X
When used at or below 125V DC or 30V DC
Korean Registration of Broadcasting and Communications Equipment, compliant with:
KC Article 58-2 of Radio Waves Act, Clause 3
Russian Customs Union TR CU 020/2011 EMC Technical Regulation
EAC Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
The following table lists the devices that are supported with the 5069-IF8 module.
The following figure shows a wiring diagram for the 5069-IF8 module with channels configured for current mode.
Channel Connections
The diagram shows devices that are connected to channels 0, 2, 5,
and 7. You are not restricted to using only this channel.
You can connect devices to any channel or combination of
channels as needed.
ANALOG INPUT
• This module has only two shield terminals. Compact 5000 I/O Shield Ground Input 0 – 1
module RTBs only support one wire per terminal.
Input 1 + 2
• If you connect more than two devices to the module, you can +
ground two devices at the shield terminals. Input 1 – 3
4-wire +
You must ground the remaining devices somewhere else, such Power Input 2 + 4
Differential
as, to the DIN rail via a terminal strip. In this case, use the supply Input 2 –
Current – 5
same power supply to power the additional devices. If
– Input 3 + 6
separate power supplies are used to power the additional Shield Ground
devices, ground the power supplies at the same ground Input 3 – 7
location. i Input 4 + 8
Input 4 – 9
2-wire – A
SA Power Differential Input 5 + 10
Connections to an external power supply that provides SA power Input 5 –
Current + Power A 11
are made via the SA Power RTB on one of the following:
supply Input 6 +
• CompactLogix 5380 controller + – 12
The following figure shows a wiring diagram for the 5069-IF8 module with channels configured for voltage mode.
ANALOG INPUT
+
4-wire
24V DC Differential 5069-IF8
Channel Connections Voltage
The diagram shows devices that are connected to channels 0, 2, 5, –
and 7. You are not restricted to using only this channel. Input 0 + 0
You can connect devices to any channel or combination of Shield Ground Input 0 – 1
channels as needed.
Input 1 + 2
+
Input 1 – 3
4-wire +
Input 2 + 4
24V DC Differential
Voltage – Input 2 – 5
IMPORTANT: Remember the following: – Input 3 + 6
• Use separate external power supplies to provide SA power to
Shield Ground Input 3 –
the system and to power external devices that are connected 7
• This module has only two shield terminals. Compact 5000 I/O + Input 4 – 9
module RTBs only support one wire per terminal. 4-wire
Input 5 + 10
If you connect more than two devices to the module, you can 24V DC Differential
ground two devices at the shield terminals. Voltage Input 5 – 11
You must ground the remaining devices somewhere else, such – Input 6 + 12
as, to the DIN rail via a terminal strip. In this case, use the Input 6 – 13
same power supply to power the additional devices. If Input 7 + 14
separate power supplies are used to power the additional
devices, ground the power supplies at the same ground Input 7 – 15
location. Shield 16
+ Shield 17
4-wire +
24V DC Differential
Voltage –
–
The following figure shows a wiring diagram for the 5069-IF8 module with different device types connected to different channels. The device
type and mode configuration for each channel must match.
Channel Connections
The diagram shows devices that are connected to channels 0, 2, 5,
and 7. You are not restricted to using only this channel.
You can connect devices to any channel or combination of channels
as needed.
ANALOG INPUT
IMPORTANT: Remember the following:
• Place additional loop devices, for example, strip chart recorders,
i
at either A location in the current loop.
• Use separate external power supplies to provide SA power to the 2-wire – A
system and to power external devices that are connected to the Differential 5069-IF8
module. Current + Power A
• This module has only two shield terminals. Compact 5000 I/O + supply –
module RTBs only support one wire per terminal. Input 0 + 0
If you connect more than two devices to the module, you can Shield Ground Input 0 – 1
ground two devices at the shield terminals. Input 1 + 2
You must ground the remaining devices somewhere else, such +
Input 1 – 3
as, to the DIN rail via a terminal strip. In this case, use the same 4-wire +
power supply to power the additional devices. If separate power Power Input 2 + 4
Differential
supplies are used to power the additional devices, ground the supply Input 2 –
Current – 5
power supplies at the same ground location. Input 3 +
– 6
Input 4 + 8
SA Power Input 4 – 9
Connections to an external power supply that provides SA power are 2-wire –
Input 5 + 10
made via the SA Power RTB on one of the following: Differential
• CompactLogix 5380 controller Current + Power Input 5 – 11
The following figure shows a functional block diagram for the 5069-IF8 module.
24V DC
5
SA Power
0
Field DC-DC 6
Converter 9
Vref B
A/D Converter, Module 24V DC
In x + Status a
Voltage/ Voltage, and Power Supply
Indicators c
Current In x – Current, MOD
k
Source 4-channel Power
Shield p
Signal
l
Conditioning Backplane
a
A/D Converter, Communication
n
Voltage, and Backplane e
Isolator
Current, ASIC
Nonvolatile
4-channel
Memory
Certifications - 5069-IF8
Certification(1) 5069-IF8
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
CE • EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2014/35/EU LVD, compliant with:
• EN 61010-2-201; Control Equipment Safety Requirements
European Union 2011/65/EU RoHS, compliant with:
• EN 50581; Technical documentation
Australian Radiocommunications Act, compliant with:
RCM EN 61000-6-4; Industrial Emissions
European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
Ex • EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• DEMKO 15 ATEX 1484X
IECEx System, compliant with:
• IEC 60079-0; General Requirements
IECEx • IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• IECEx UL 15.0055X
Korean Registration of Broadcasting and Communications Equipment, compliant with:
KC Article 58-2 of Radio Waves Act, Clause 3
Russian Customs Union TR CU 020/2011 EMC Technical Regulation
EAC Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
The following table lists the analog devices that are supported with the 5069-IY4 and 5069-IY4K modules.
The following figure shows a wiring diagram for a 5069-IY4 module with channels configured for current mode and voltage mode with
single-ended inputs.
5069-IY4 and 5069-IY4K Wiring Diagram - Current Mode and Voltage Mode With Single-ended Inputs
Channel Connections
The diagram shows devices that are connected to channels 0, 1,
and 2. You are not restricted to using only this channel.
You can connect devices to any channel or combination of
channels as needed.
ANALOG INPUT
as, to the DIN rail via a terminal strip. In this case, use the Input 0 – 3
same power supply to power the additional devices. If separate Voltage RTD –/Com 4
power supplies are used to power the additional devices,
ground the power supplies at the same ground location. + GND Signal Input 1 + 5
Input 1 – 6
RTD–/Com 7
Input 2 + 8
Voltage
SA Power Input 2 – 9
+
Connections to an external power supply that provides SA power GND Signal RTD –/Com 10
are made via the SA Power RTB on one of the following:
11
• CompactLogix 5380 controller
• Compact GuardLogix 5380 controller 12
The following figure shows a wiring diagram for a 5069-IY4 module with channels configured for current mode and voltage mode with mixed
transmitter inputs.
5069-IY4 and 5069-IY4K Wiring Diagram - Current Mode and Voltage Mode With Mixed Transmitter Inputs
Channel Connections
The diagram shows devices that are connected to channels 0, 1, 2,
and 3. You are not required to use all of the channels.
You can connect devices to any channel or combination of
channels as needed.
Input 1 – 6
RTD–/Com 7
Input 2 + 8
Differential -
SA Power Input 2 – 9
Connections to an external power supply that provides SA power Current Signal
RTD –/Com 10
are made via the SA Power RTB on one of the following: - + +
11
• CompactLogix 5380 controller
• Compact GuardLogix 5380 controller 12
The following figure shows a wiring diagram for a 5069-IY4 module with channels configured for RTD mode.
ANALOG INPUT
RTD –/Com 4
Compact 5000 I/O module RTBs only support one wire per Shield Ground Input 1 – 6
11
12
Input 3 + 13
3-wire RTD
Input 3 – 14
RTD –/Com 15
Shield 16
Shield 17
The following figure shows a wiring diagram for a 5069-IY4 module with channels configured for RTD mode.
ANALOG INPUT
Channel Connections
The diagram shows a device that is connected to 5069-IY4
channels 0, 2, and 3. You are not restricted to using only
these channels.
You can connect devices to any channel or combination 0
of channels as needed. 1
RTD –/Com 4
on the RTDs that are connected to channel 3, you must RTD –/Com 7
jumper terminals Input x- and RTD x together. 2-wire RTD Using Input 2 + 8
• This module has only two shield terminals. Compact 3-wire Mode
5000 I/O module RTBs only support one wire per Input 2 – 9
RTD –/Com 15
Shield 16
Shield 17
The following figure shows a wiring diagram for a 5069-IY4 module with channels configured for thermocouple mode.
ANALOG INPUT
5069-IY4
Channel Connections
The diagram shows a device that is connected to channel 0 and
channel 2. You are not restricted to using only these channels.
You can connect devices to any channel or combination of
Thermocouple
channels as needed.
Input 0 + 2
Input 0 – 3
RTD –/Com 4
IMPORTANT: When you use the 5069-IY4 and 5069-IY4K analog Input 1 + 5
input modules in Thermocouple mode, you must use one of these Input 1 – 6
Input 3 + 13
Input 3 – 14
RTD –/Com 15
Shield 16
Shield 17
The following figure shows a wiring diagram for the 5069-IY4 module with different device types connected to different channels.
5069-IY4 and 5069-IY4K Wiring Diagram - Current, Voltage and RTD Device Types Connected to the Module
Channel Connections
The diagram shows an analog current device connected to
channel 0, an analog voltage device connected to channel 1, and
an RTD connected to channel 2. You are not restricted to using
those devices with those channels.
You can connect devices to any channel or combination of
channels as needed.
ANALOG INPUT
IMPORTANT: Remember the following:
• In this example, the module can use a 5069-RTB18 RTB Shield Ground
because no thermocouple devices are connected to the
module.
• Use separate external power supplies to provide SA power to Single-ended
Power – current 5069-IY4
the system and to power external devices that are connected
to the module. Supply
+ + Signal
• This module has only two shield terminals. Compact 5000 I/O
0
module RTBs only support one wire per terminal.
If you connect more than two devices to the module, you can Shield Ground 1
the same power supply to power the additional devices. If + RTD –/Com 4
separate power supplies are used to power the additional 4-wire +
Input 1 + 5
devices, ground the power supplies at the same ground 24V DC Differential
Voltage – Input 1 – 6
location.
– RTD –/Com 7
Input 2 + 8
Input 2 – 9
The following figure shows a wiring diagram for 5069-a IY4 module with channels configured for current, voltage, RTD, and
thermocouple modes.
5069-IY4 and 5069-IY4K Wiring Diagram - Current, Voltage, RTD, and Thermocouple Modes
Channel Connections
The diagram shows specific devices connected to channels 0, 1,
2, and 3, respectively. You are not restricted to using those
devices with those channels.
You can connect devices to any channel or combination of
channels as needed. IMPORTANT: In this example, the module uses a 5069-RTB14CJC
RTB because a thermocouple is connected to the module.
ANALOG INPUT
IMPORTANT: Remember the following:
• When an analog current device is connected to the module,
place additional loop devices, for example, strip chart i
recorders, at either A location in the current loop.
• Use separate external power supplies to provide SA power 2-wire – A 5069-IY4
to the system and to power external devices that are Differential
connected to the module. Current + Power
A
• This module has only two shield terminals. Compact 5000 I/ supply
O module RTBs only support one wire per terminal. + –
• If you connect more than two devices to the module, you
Shield Ground
can ground two devices at the shield terminals. Input 0 + 2
You must ground the remaining devices somewhere else,
such as, to the DIN rail via a terminal strip. In this case, use Single-ended Input 0 – 3
the same power supply to power the additional devices. If Voltage RTD –/Com 4
separate power supplies are used to power the additional Power +
devices, ground the power supplies at the same ground Supply + Signal Input 1 + 5
– GND
location. Input 1 – 6
Shield Ground
RTD –/Com 7
must connect DC power to the component, that is, controller, RTD –/Com 15
adapter, or field potential distributor, that provides SA
Shield 16
Power to the modules. Thermocouple
• If you install modules in a system that use AC SA power and Shield 17
DC SA power, you must install them on separate SA power
buses.
• You use a 5069-FPD field potential distributor to establish a
new SA Power bus in a system. SA Power buses are isolated
from each other. To keep the modules on separate SA Power
buses, complete these steps.
1. Install the modules that use one type of SA power, for
example DC, to the right of the adapter or controller, that
is, the first SA Power bus.
2. Install the 5069-FPD field potential distributor to establish
a second SA Power bus.
3. Install the modules that use the other type of SA power,
for example AC, on the second SA Power bus.
The following figure shows a functional block diagram for the 5069-IY4 and 5069-IY4K modules.
SA Power 5
0
Field DC-DC 6
Converter 9
In x +
Voltage/ Vref
In x – Module B
Current/mV/ Status 24V DC
TC Source Shield Power Supply a
Indicators
MOD c
A/D Power k
Signal Converter, p
In x + Conditioning Voltage, Backplane l
RTD, Current,
In x – Communication a
2 or milli-volt/TC,
RTD – Backplane n
3-wire RTD, 4- Isolator e
Shield ASIC
channel Nonvolatile
Memory
CJC CJC x –
A/D Converters,
Thermistors, CJC x – Signal CJC Thermistor Isolator
Top/Bottom Conditioning (Top and
Bottom)
The following figure shows a wiring diagram for the 5069-OF4 and 5069-OF4K modules when used in current mode.
Channel Connections
The diagram shows a device that is connected to channels 0, 2,
and 3. You are not restricted to using only these channels.
You can connect devices to any channel or combination of
channels as needed.
i
Differential
+ ANALOG OUTPUT
IMPORTANT: Remember the following: Current A
• Place more loop devices, for example, strip chart recorders, at Receiver or
– A
either A location in the current loop. Input
• This module has only two shield terminals. Compact 5000 I/O
module RTBs only support one wire per terminal. Shield Ground 5069-OF4
• If you connect more than two devices to the module, you can
ground two devices at the shield terminals. You must ground
Output 0 + 0
the remaining devices somewhere else, such as, to the DIN rail
via a terminal strip Output 0 – 1
i Output 1 + 2
Differential Output 1 – 3
SA Power +
Current A Output 2 + 4
Connections to an external power supply that provides SA power
Receiver or Output 2 –
are made via the SA Power RTB on one of the following: – A 5
Input
• CompactLogix 5380 controller Output 3 + 6
The following figure shows a wiring diagram for the 5069-OF8 module when used in current mode.
ANALOG OUTPUT
5069-OF8
i
Channel Connections Differential
The diagram shows devices that are connected to channels 0, 4, +
Current A Output 0 + 0
and 7. You are not restricted to using only those channels. Receiver or A Output 0 – 1
You can connect devices to any channel or combination of Input –
channels as needed. Output 1 + 2
Output 1 – 3
Shield Ground
Output 2 + 4
Output 2 – 5
• Place more loop devices, for example, strip chart recorders, at Differential Output 3 – 7
+
either A location in the current loop. Current A Output 4 + 8
• This module has only two shield terminals. Compact 5000 I/O Receiver or Output 4 –
– A 9
module RTBs only support one wire per terminal. Input
Output 5 + 10
• If you connect more than two devices to the module, you can
ground two devices at the shield terminals. You must ground Output 5 – 11
the remaining devices somewhere else, such as, to the DIN rail Output 6 + 12
Output 7 + 14
Output 7 – 15
Shield 16
Shield 17
Differential i
+
Current A
Receiver or
– A
Input
The following figure shows a wiring diagram for the 5069-OF4 and 5069-OF4K modules when used in voltage mode.
Differential
+ ANALOG OUTPUT
Voltage
Receiver or
Input –
5069-OF4
Input –
can ground two devices at the shield terminals. You must Output 3 + 6
13
14
15
Shield 16
Shield 17
The following figure shows a wiring diagram for the 5069-OF8 module when used in voltage mode.
ANALOG OUTPUT
5069-OF8
Differential
+
Channel Connections Voltage Output 0 + 0
The diagram shows a device that is connected to channels 0, 2, Receiver or Output 0 – 1
and 3. You are not restricted to using only these channels. Input –
You can connect devices to any channel or combination of Output 1 + 2
Compact 5000 I/O module RTBs only support one wire per
Output 3 + 6
terminal.
If you connect more than two devices to the module, you can Differential Output 3 – 7
+
ground two devices at the shield terminals. You must ground the Voltage Output 4 + 8
remaining devices somewhere else, such as, to the DIN rail via a Receiver or Output 4 – 9
Input –
terminal strip. Output 5 + 10
Output 5 – 11
Output 6 + 12
Output 6 – 13
Output 7 + 14
Output 7 – 15
Shield 16
Shield 17
Differential
+
Voltage
Receiver or
Input –
The following figure shows a functional block diagram for the 5069-OF4 and 5069-OF4K modules.
24V DC
5
SA Power
0
Field DC-DC 6
Converter 9
B
Module 24V DC
Vref Status a
Power Supply
Indicators c
MOD
k
Power
p
l
Backplane
Out x + a
Voltage/ Communication
D/A Converter, n
Current Out x – Signal Voltage, and Backplane e
Load Isolator
Shield Conditioning Current, ASIC Nonvolatile
4-channel Memory
The following figure shows a functional block diagram for the 5069-OF8 module.
24V DC
5
SA Power
0
Field DC-DC 6
Converter 9
Vref B
D/A Converter, Module 24V DC
Status a
Voltage, and Power Supply
Indicators c
Current, MOD
k
4-channel Power
p
l
Backplane
Out x + a
Voltage/ Communication
D/A Converter, n
Current Out x – Signal Voltage, and Backplane e
Load Isolator
Shield Conditioning Current, ASIC Nonvolatile
4-channel Memory
Channel Connections
The diagram shows devices that are connected to safety input
channels 0, 1, 6, and 7. You are not restricted to using only those 5069-IB8S
channels.
You can connect devices to any safety input channel or
combination of channels as needed. Safety Input 0
Safety Input 1
When the module is wired as shown, and the requirements listed are met in the project of the safety controller, it is suitable for applications
that are rated up to, and including, Category 4 as defined in ISO 13849-1. To achieve that suitability rating, you may have to perform
diagnostic testing and monitoring of the safety function.
One diagnostic test method is to configure the safety input channel for Safety Pulse Test to test the circuit for short circuits to 24V DC.
Safety input pairs must be associated with different Test Output sources.
Channel Connections
The diagram shows devices that are connected to safety input
channels 0 and 1, and to test outputs 0 and 1.
You are not restricted to using only those safety input
channels.
You can connect devices to any channel or combination of
channels as needed.
SA Power 5069-IB8S
Connections to an external power supply that provides SA
power via the SA Power RTB on one of the following:
• Compact GuardLogix 5380 controller Safety Input 0 0
• 5069-AENTR or 5069-AEN2TR EtherNet/IP Adapter
• 5069-FPD field potential distributor Safety Input 1 1
Muting
COM 16
Lamp
COM 17
When the module is wired as shown, and the requirements listed are met in the project of the safety controller, it is suitable for applications
that are rated up to, and including, Category 3 as defined in ISO 13849-1.
To achieve that suitability rating, you must meet the following requirements:
• Fault Exclusion is External Wiring fault.
• Use a SIL CL3, PLd, Cat. 3 qualified sensor.
• One of the following configuration combinations:
- Input Point Mode = Safety Pulse Test
- Test Output Mode = Pulse Test
- Input Point Mode = Safety
- Test Output Mode = Power Supply
Channel Connections
The diagram shows a device that is connected to safety input channel
0 and test output channel 0. You are not restricted to using only those
channels.
You can connect devices to any safety input channel or combination
of channels as needed.
We recommend that you connect even-numbered input points to
even-numbered test output points and odd-numbered input points to SIL CL3, PLd, Cat. 3 qualified sensor 5069-IB8S
odd-numbered test output points.
This wiring practice can maximize diagnostic independence and
separation.
Safety Input 0
Safety Input 1
Safety Input 2
SA Power
Connections to an external power supply that provides SA power via Safety Input 3
the SA Power RTB on one of the following:
Safety Input 4
• Compact GuardLogix 5380 controller
• 5069-AENTR or 5069-AEN2TR EtherNet/IP Adapter Safety Input 5
• 5069-FPD field potential distributor
Safety Input 6
IMPORTANT: Remember the following:
• The 5069-IB8S and 5069-IB8SK modules use DC SA power. You Safety Input 7
must connect DC power to the component, that is, controller,
adapter, or field potential distributor, that provides SA Power to Test Output 0
the modules. Test Output 0
• If you install modules in a system that uses AC SA power and DC SA
power, you must install them on separate SA power buses. Test Output 1
• You use a 5069-FPD field potential distributor to establish a new
Test Output 1
SA Power bus in a system. SA Power buses are isolated from each
other. To keep the modules on separate SA Power buses, complete Test Output/Muting Output 2
these steps.
Test Output/Muting Output 2
1. Install the modules that use one type of SA power, for example
DC, to the right of the adapter or controller, that is, the first SA Test Output/Muting Output 3
Power bus.
2. Install the 5069-FPD field potential distributor to establish a Test Output/Muting Output 3
second SA Power bus. COM
3. Install the modules that use the other type of SA power, for
example AC, on the second SA Power bus. COM
• The SA Power to adjacent SA Power electrical isolation that the
5069-FPD field potential distributor provides has a rating of 240V
AC (continuous) reinforced insulation type.
Voltage and current ratings - System is mounted in any orientation other than Horizontal (module de-rating)(3)
Input Rating 2.5 mA per channel
Test Output Rating 200 mA per channel
MOD Power 75 mA @ 18…32V DC
You can use the safety output modules in Bipolar mode or Sourcing mode.
Bipolar Mode
When the module is wired as shown, and the requirements listed are met in the project of the safety controller, it is suitable for applications
that are rated up to, and including, Category 4 as defined in ISO 13849-1.
To achieve that suitability rating, you may have to perform diagnostic testing and monitoring of the safety function. One diagnostic test
method is to configure the safety output channel for Safety Pulse Test to test the circuit for short circuits to 24V DC.
• We strongly recommend that you connect separate shielded cables to the P terminal and the N terminal to reduce the possibility of
a wire short between the terminals. If a wire-short fault is detected across the P-N pair, the module outputs are turned off, but the
actuator that is connected to it remains on.
• Configure the application so that No Load and Overload conditions are only detectable at the P terminal.
For Category 4 applications, if your application remains in safe state, that is, the output is off, for a prolonged duration, we recommend that
you take one of the following actions:
• Apply output monitoring at the actuator. The monitoring can be direct or indirect.
• Limit the safe state to no more than 24 hours.
• Conduct functional test if safe state dwell time increases.
Actuator LA Power
In this wiring configuration, you must connect the LA+ terminal to an
SELV/PELV-listed power supply.
The LA+ and LA- on the actuator must be connected to the same power
supply as the LA+ and LA- on the module.
OUTPUT
Connection Pairs
The terminals for each channel function as a Bipolar connection pair
when you use a 5069-OBV8S or 5069-OB8VSK module in Bipolar switching LA +
mode. For example, the Safety Output 0 P (Sourcing) terminal and Safety
Output 0 N (Sinking) terminal are a Bipolar connection pair. That is, they 5069-OBV8S
are a P-N pair.
When the module is in Bipolar switching mode, you must connect the K1
device to both terminals. Safety Output 0 P (Sourcing) 0
0. You are not limited to using channel 0 in this mode. You can use all Safety Output 1 N (Sinking) 3
channel pairs as determined by your application.
Safety Output 2 P (Sourcing) 4
LA –
M Safety Output 2 N (Sinking) 5
LA Power
The Local Actuator (LA+ and LA –) power connections are used to supply Safety Output 3 P (Sourcing) 6
field-side power to the module. Safety Output 3 N (Sinking) 7
• The 5069-OBV8S and 5069-OBV8SK modules do not draw current
from the SA Power bus. Safety Output 4 P (Sourcing) 8
Still, the modules are DC-type modules and you must install them on a DC Safety Output 4 N (Sinking) 9
SA Power bus.
• If you install modules in a system that use AC SA power and DC SA Safety Output 5 P (Sourcing) 10
power, you must install them on separate SA power buses. Safety Output 5 N (Sinking) 11
• You use a 5069-FPD field potential distributor to establish a new SA
Power bus in a system. SA Power buses are isolated from each other. Safety Output 6 P (Sourcing) 12
To keep the modules on separate SA Power buses, complete the Safety Output 6 N (Sinking) 13
following steps.
1. Install the modules that use one type of SA power, for example DC, to Safety Output 7 P (Sourcing) 14
the right of the adapter or controller, that is, the first SA Power bus. Safety Output 7 N (Sinking) 15
2. Install the 5069-FPD field potential distributor to establish a second
24V DC + LA +
SA Power bus. 16
SELV/PELV-listed
3. Install the modules that use the other type of SA power, for example LA –
power supply – 17
AC, on the second SA Power bus.
• We strongly recommend that, if you have a direct connection
between the safety output module and an input module and those
modules are powered by separate power supplies, that you connect
SA- and LA- together. This practice helps to eliminate grounding float
from disrupting diagnostics.
When the module is wired as shown, and the requirements listed are met in the project of the safety controller, it is suitable for applications
that are rated up to, and including, Category 4 as defined in ISO 13849-1.
To achieve that suitability rating, you may have to perform diagnostic testing and monitoring of the safety function. One diagnostic test
method is to configure the safety output channel for Safety Pulse Test to test the circuit for short circuits to 24V DC. Configure the
application so that a No Load fault can only be detected if the wires from both the P- terminal and the N- terminal are disconnected.
For Category 4 applications, if your application remains in safe state, that is, the output is off, for a prolonged duration, we recommend that
you take one of the following actions:
• Apply output monitoring at the actuator. The monitoring can be direct or indirect.
• Limit the safe state to no more than 24 hours.
• Conduct functional test if safe state dwell time increases.
Connection Pairs
The terminals for each channel function as a Bipolar connection pair
when you use a 5069-OBV8S or 5069-OB8VSK module in Bipolar
switching mode. For example, the Safety Output 0 P (Sourcing) OUTPUT
terminal and Safety Output 0 N (Sinking) terminal are a Bipolar
connection pair. That is, they are a P-N pair.
When the module is in Bipolar switching mode, you must connect the
device to both terminals.
5069-OBV8S
Channel Connections K1
This wiring example shows connections to the P-N pair for Safety Safety Output 0 P (Sourcing) 0
Output 0. You are not limited to using channel 0 in this mode. You
can use all channel pairs as determined by your application. Safety Output 0 N (Sinking) 1
Still, the modules are DC type modules, and you must install them on
Safety Output 3 N (Sinking) 7
a DC SA Power bus.
• If you install modules in a system that use AC SA power and DC SA Safety Output 4 P (Sourcing) 8
other. To keep the modules on separate SA Power buses, Safety Output 5 N (Sinking) 11
complete the following steps.
1. Install the modules that use one type of SA power, for example Safety Output 6 P (Sourcing) 12
DC, to the right of the adapter or controller, that is, the first SA Safety Output 6 N (Sinking) 13
Power bus.
Safety Output 7 P (Sourcing) 14
2. Install the 5069-FPD field potential distributor to establish a
second SA Power bus. Safety Output 7 N (Sinking) 15
3. Install the modules that use the other type of SA power, for 24V DC + LA + 16
example AC, on the second SA Power bus. SELV/PELV-listed
• We strongly recommend that, if you have a direct connection – LA – 17
power supply
between the safety output module and an input module and those
modules are powered by separate power supplies, that you
connect SA- and LA- together. This practice helps to eliminate
grounding float from disrupting diagnostics.
When the module is wired as shown, and the requirements listed are met in the project of the safety controller, it is suitable for applications
that are rated up to, and including, Category 4 as defined in ISO 13849-1. To achieve that suitability rating, you may have to perform
diagnostic testing and monitoring of the safety function. One diagnostic test method is to configure the safety output channel for Safety
Pulse Test to test the circuit for short circuits to 24V DC.
For Category 4 applications, if your application remains in safe state, that is, the output is off, for a prolonged duration, we recommend that
you take one of the following actions:
• Apply output monitoring at the actuator. The monitoring can be direct or indirect.
• Limit the safe state to no more than 24 hours.
• Conduct functional test if safe state dwell time increases.
• A qualified actuator must be installed, for example, in accordance with IEC 60947.
Connection Pairs
The terminals for each channel function as a Bipolar connection pair when
you use a 5069-OBV8S or 5069-OB8VSK module in Bipolar switching mode.
For example, the Safety Output 0 P (Sourcing) terminal and Safety Output 0
OUTPUT
N (Sinking) terminal are a Bipolar connection pair. That is, they are a
P-N pair.
When the module is in Bipolar switching mode, you must connect the device
to both terminals.
5069-OBV8S
Channel Connections Cat. 4 Actuator
This wiring example shows connections to the P-N pair for Safety Output 0.
Subsystem
You are not limited to using channel 0 in this mode. You can use all channel
Safety Output 0 P (Sourcing)
pairs as determined by your application.
Safety Output 0 N (Sinking)
Safety Output 1 P (Sourcing)
LA Power
The Local Actuator (LA+ and LA –) power connections are used to supply Safety Output 1 N (Sinking)
field-side power to the module.
Safety Output 2 P (Sourcing)
• The 5069-OBV8S and 5069-OBV8SK modules do not draw current from
the SA Power bus. Safety Output 2 N (Sinking)
Still, the modules are DC type modules, and you must install them on a DC SA
Safety Output 3 P (Sourcing)
Power bus
• If you install modules in a system that use AC SA power and DC SA power, Safety Output 3 N (Sinking)
you must install them on separate SA power buses.
Safety Output 4 P (Sourcing)
• You use a 5069-FPD field potential distributor to establish a new SA
Power bus in a system. SA Power buses are isolated from each other. To Safety Output 4 N (Sinking)
keep the modules on separate SA Power buses, complete the Safety Output 5 P (Sourcing)
following steps.
1. Install the modules that use one type of SA power, for example DC, to Safety Output 5 N (Sinking)
the right of the adapter or controller, that is, the first SA Power bus. Safety Output 6 P (Sourcing)
2. Install the 5069-FPD field potential distributor to establish a second
SA Power bus. Safety Output 6 N (Sinking)
3. Install the modules that use the other type of SA power, for example Safety Output 7 P (Sourcing)
AC, on the second SA Power bus.
• We strongly recommend that if, you have a direct connection between Safety Output 7 N (Sinking)
the safety output module and an input module and those modules are 24V DC + LA +
powered by separate power supplies, that you connect SA- and LA- SELV/PELV-listed
together. This practice helps to eliminate grounding float from LA –
power supply –
disrupting diagnostics.
• The SA Power to adjacent SA Power electrical isolation that the
5069-FPD field potential distributor provides has a rating of 240V AC
(continuous) reinforced insulation type.
Sourcing Mode
When the module is wired as shown, it is suitable for applications that are rated up to, and including, Category 2 as defined in ISO 13849-1.
To achieve that suitability rating, you may have to perform diagnostic testing and monitoring of the safety function. One diagnostic test
method is to configure the safety output channel for Safety Pulse Test to test the circuit for short circuits to 24V DC.
5069-OBV8S
LA Power
The Local Actuator (LA+ and LA –) power connections are Safety Output 0 P (Sourcing) 0
used to supply field-side power to the module. K
Safety Output 0 N (Sinking) 1
• The 5069-OBV8S and 5069-OBV8SK modules do not
draw current from the SA Power bus. Safety Output 1 P (Sourcing) 2
Still, the modules are DC type modules, and you must install Safety Output 1 N (Sinking) 3
them on a DC SA Power bus
• If you install modules in a system that use AC SA power Safety Output 2 P (Sourcing) 4
M LA –
and DC SA power, you must install them on separate SA Safety Output 2 N (Sinking) 5
power buses.
• You use a 5069-FPD field potential distributor to Safety Output 3 P (Sourcing) 6
3. Install the modules that use the other type of SA Safety Output 6 N (Sinking) 13
power, for example AC, on the second SA Power bus.
• We strongly recommend that, if you have a direct Safety Output 7 P (Sourcing) 14
connection between the safety output module and an Safety Output 7 N (Sinking) 15
input module and those modules are powered by 24V DC +
separate power supplies, that you connect SA- and LA- LA + 16
SELV/PELV-listed
together. This practice helps to eliminate grounding power supply – LA – 17
float from disrupting diagnostics.
When the module is wired as shown, it is suitable for applications that are rated up to, and including, Category 4 as defined in ISO 13849-1.
To achieve that suitability rating, you may have to perform diagnostic testing and monitoring of the safety function. One diagnostic test
method is to configure the safety output channel for Safety Pulse Test to test the circuit for short circuits to 24V DC.
For Category 4 applications, if your application remains in safe state, that is, the output is off, for a prolonged duration, we recommend that
you take one of these actions:
• Apply output monitoring at the actuator. The monitoring can be direct or indirect.
• Limit the safe state to no more than 24 hours.
• Conduct functional test if safe state dwell time increases.
Connection Pairs
When you use dual-channel sourcing wiring on the 5069-OBV8S or
5069-OBV8SK module, you must connect the devices to
dual-channel connection pairs. For example, the devices are
connected to channels 4 and 5 because they are a connection
pair. The following channels are dual-channel connection pairs:
OUTPUT
• Channels 0 and 1 (shown)
• Channels 2 and 3
• Channels 4 and 5
• Channels 6 and 7
5069-OBV8S
Channel Connections K1
This wiring example shows connections to Safety Output 0 P and
Safety Output 0 P (Sourcing) 0
Safety Output 1 P. You are not limited to using channels 0 and 1 in
this mode. You can use all channel pairs as determined by your Safety Output 0 N (Sinking) 1
SA power, you must install them on separate SA power buses. Safety Output 4 N (Sinking) 9
• You use a 5069-FPD field potential distributor to establish a new
Safety Output 5 P (Sourcing) 10
SA Power bus in a system. SA Power buses are isolated from
each other. To keep the modules on separate SA Power buses, Safety Output 5 N (Sinking) 11
complete these steps.
Safety Output 6 P (Sourcing) 12
1. Install the modules that use one type of SA power, for example
DC, to the right of the adapter or controller, that is, the first SA Safety Output 6 N (Sinking) 13
Power bus.
Safety Output 7 P (Sourcing) 14
2. Install the 5069-FPD field potential distributor to establish a
second SA Power bus. Safety Output 7 N (Sinking) 15
3. Install the modules that use the other type of SA power, for 24V DC + LA + 16
example AC, on the second SA Power bus. SELV/PELV-listed
• We strongly recommend that, if you have a direct connection – LA – 17
power supply
between the safety output module and an input module and
those modules are powered by separate power supplies, that you
connect SA- and LA- together. This practice helps to eliminate
grounding float from disrupting diagnostics.
When the module is wired as shown on page 96, and the requirements listed are met in the project of the safety controller, it is suitable for
applications that are rated up to, and including, Category 4 as defined in ISO 13849-1.
To achieve that suitability rating, you may have to perform diagnostic testing and monitoring of the safety function. One diagnostic test
method is to configure the safety output channel for Safety Pulse Test to test the circuit for short circuits to 24V DC.
• All power source cables must be installed separately, for example, with a separate cable duct or shielded cable. Power source cables
are connections to the MOD+, SA+, or LA+ terminals.
Otherwise, a Short Circuit condition between SA+ and P can be detected and the output is turned off but the actuator that is
connected to it remains on.
• You must connect two ground terminals. Otherwise, the maximum residual current at signal 0 cannot be maintained if only one
ground line is connected and it is interrupted.
• A qualified actuator must be installed, for example, in accordance with IEC 60947.
For Category 4 applications, if your application remains in safe state, that is, the output is off, for a prolonged duration, we recommend that
you take one of these actions:
• Apply output monitoring at the actuator. The monitoring can be direct or indirect.
• Limit the safe state to no more than 24 hours.
• Conduct functional test if safe state dwell time increases.
5069-OBV8S
Cat. 4 Actuator
LA Power Subsystem
The Local Actuator (LA+ and LA –) power connections are
used to supply field-side power to the module. Safety Output 0 P (Sourcing)
• The 5069-OBV8S and 5069-OBV8SK modules do not Safety Output 0 N (Sinking)
draw current from the SA Power bus.
Still, the modules are DC type modules, and you must install Safety Output 1 P (Sourcing)
them on a DC SA Power bus Safety Output 1 N (Sinking)
• If you install modules in a system that use AC SA power
and DC SA power, you must install them on separate SA Safety Output 2 P (Sourcing)
LA –
power buses. Safety Output 2 N (Sinking)
• You use a 5069-FPD field potential distributor to
Safety Output 3 P (Sourcing)
establish a new SA Power bus in a system. SA Power
buses are isolated from each other. To keep the Safety Output 3 N (Sinking)
modules on separate SA Power buses, complete these
Safety Output 4 P (Sourcing)
steps.
1. Install the modules that use one type of SA power, for Safety Output 4 N (Sinking)
example DC, to the right of the adapter or controller,
Safety Output 5 P (Sourcing)
that is, the first SA Power bus.
2. Install the 5069-FPD field potential distributor to Safety Output 5 N (Sinking)
establish a second SA Power bus. Safety Output 6 P (Sourcing)
3. Install the modules that use the other type of SA
power, for example AC, on the second SA Power bus. Safety Output 6 N (Sinking)
• We strongly recommend that, if you have a direct
Safety Output 7 P (Sourcing)
connection between the safety output module and an
input module and those modules are powered by Safety Output 7 N (Sinking)
separate power supplies, that you connect SA- and LA- 24V DC +
LA +
together. This practice helps to eliminate grounding SELV/PELV-listed
float from disrupting diagnostics. power supply – LA –
Voltage and current ratings - System is mounted in any orientation other than Horizontal (module de-rating)(3)
Output Rating 0.7 A per channel
MOD Power 75 mA @ 18…32V DC
5069-RTB18-SCREW connections 0.5…1.5 mm2 (22…16 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 3.5 mm (9/64
in.) insulated max diameter
5069-RTB18-SPRING connections 0.5…1.5 mm2 (22…16 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 2.9 mm (1/8
in.) insulated max diameter
Insulation stripping length
5069-RTB18-SCREW connections 12 mm (0.47 in.)
5069-RTB18-SPRING connections 10 mm (0.39 in.)
Weight, approx 240 g (0.53 lb.)
Enclosure type rating None (open-style)
North American temp code T4
ATEX temp code T4
IECEx temp code T4
(1) Level of MOD Power current that passes through the module depends on the system configuration, such as, module slot location and the other module types that are used in the system. For
more information, see the CompactLogix 5380 and Compact GuardLogix 5380 Controllers User Manual, 5069-UM001, CompactLogix 5480 Controllers User Manual, 5069-UM002, and Compact
5000 EtherNet/IP Adapters User Manual, 5069-UM004.
(2) Level of SA Power current that passes through the module depends on the system configuration, such as, module slot location and the other module types that are used in the system. For
more information, see the CompactLogix 5380 and Compact GuardLogix 5380 Controllers User Manual, 5069-UM001, CompactLogix 5480 Controllers User Manual, 5069-UM002, and Compact
5000 EtherNet/IP Adapters User Manual, 5069-UM004.
(3) The additional supported mounting orientations are Inverted Horizontal, Vertical, Inverted Vertical, Upside Down, and Upside Up.
(4) Use this Conductor Category information for planning conductor routing. See the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
Power Supply
+V DC COM
COUNTER
Channel Connections
The diagram shows connections to A
Input A0+
channel 0. You are not restricted to A-
0
Input Z0- 5
Output 1
13
Output 2
14
Output 3
Earth Ground 15
If the module is installed on a DIN Chassis
16
rail that is grounded, you can Chassis
connect the cable shield to either 17
The following figure shows a wiring diagram for the 5069-HSC2xOB4 module connected to a single-ended encoder.
Channel Connections
The diagram shows connections to channel 0. You are Power Supply
not restricted to using only that channel.
You can connect to any channel or combination of +V DC COM
COUNTER
channels as needed.
Allen-Bradley 845H
IMPORTANT: We recommend that you use twisted- VS
Series Single-ended
pair, individually shielded cable with a maximum GND
Encoder 5069-HSC2xOB4
length of 300 m (1000 ft) when connecting a
single-ended encoder. R
For more information on the cable type to use, see the A
encoder documentation. Input A0+ 0
Input A0- 1
B
IMPORTANT: External resistors, as indicated in the R Input B0+ 2
Imin = 4.0 mA isolated from the motor and ground. Input Z1- 11
Output 0 12
The following figure shows a wiring diagram for the 5069-HSC2xOB4 module connected to a discrete input device.
Power Supply
COUNTER
Channel Connections
The diagram shows connections to input channels
+V DC
0 and 1. You are not restricted to using only those
input channels. COM
You can connect to any input channel or
combination of input channels as needed. 5069-HSC2xOB4
VS
COM
IMPORTANT: External resistors, as indicated in the Input A0- 1
R location to the left, are required if they are not Input B0+ 2
internal to the encoder. The pull-up resistor (R)
value depends on the power supply value. The Input B0- 3
5 500 Ω Output 2 14
12 2250 Ω
Output 3 15
24 5250 Ω
Chassis 16
(1) Resistance values can change, depending on
your application. The minimum resistor (R) Chassis 17
The following figure shows a wiring diagram for the 5069-HSC2xOB4 module connected to a discrete output device.
Channel Connections
The diagram shows connections to output channels 0 and 2. You
are not restricted to using only those output channels.
You can connect to any output channel or combination of output
channels as needed. COUNTER
SA Power
Connections to an external power supply that provides SA power
via the SA Power RTB on one of the following: 5069-HSC2xOB4
• CompactLogix 5380 controller
• Compact GuardLogix 5380 controller
• CompactLogix 5480 controller
Input A0+ 0
• 5069-AENTR or 5069-AEN2TR EtherNet/IP Adapter
• 5069-FPD field potential distributor Input A0- 1
The outputs have a return through internal module circuitry SA Power Supply Input A1+ 6
to the SA (–) terminal on the SA Power RTB.
• If you install modules in a system that use AC SA power and Input A1- 7
DC SA power, you must install them on separate SA power SA+ Input B1+ 8
buses.
• You use a 5069-FPD field potential distributor to establish a SA- Input B1- 9
new SA Power bus in a system. SA Power buses are isolated Input Z1+ 10
from each other. To keep the modules on separate SA Power
buses, complete these steps. Input Z1- 11
1. Install the modules that use one type of SA power, for CR Output 0 12
example DC, to the right of the adapter or controller, that
is, the first SA Power bus. Output 1 13
Chassis 17
The following figure shows functional block diagrams for the 5069-HSC2xOB4 module inputs and outputs.
Current
A0 (+)
Limiting
Channel A0 Status
A0 (–)
Module Inputs
This graphic shows the
diagram for Counter 0. Current
B0 (+)
Counter 1 uses the same Limiting
design. Channel B0 Status
Also, the modules only
supports a DC
power source. B0 (–)
Current
Z0 (+) Limiting
Channel Z0 Status
Z0 (–)
Module 24V DC
Connections to external SA+ Status
Power
power supply that provides Indicators 5
Supply MOD
SA Power. SA- 0
Power
For more information, see 6
page 104. Backplane 9
Output Communication
Output Backplane B
Isolation ASIC a
Circuitry Nonvolatile c
Memory k
Inductive Kickback p
Suppression l
a
24V DC to 5V DC Soft Start SA+ n
Converter Circuitry e
SA-
Certifications - 5069-HSC2xOB4
Certification(1) 5069-HSC2xOB4
UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
c-UL-us UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
CE • EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2014/35/EU LVD, compliant with:
• EN 61010-2-201; Control Equipment Safety Requirements
European Union 2011/65/EU RoHS, compliant with:
• EN 50581; Technical documentation
Australian Radiocommunications Act, compliant with:
RCM EN 61000-6-4; Industrial Emissions
European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
Ex • EN 60079-15; Potentially Explosive Atmospheres, Protection “n”
• II 3 G Ex nA IIC T4 Gc
• DEMKO 15 ATEX 1455X
IECEx System, compliant with:
• IEC 60079-0; General Requirements
IECEx • IEC 60079-15; Potentially Explosive Atmospheres, Protection “n”
• II 3 G Ex nA IIC T4 Gc
• IECEx UL 15.0007X
Korean Registration of Broadcasting and Communications Equipment, compliant with:
KC Article 58-2 of Radio Waves Act, Clause 3
Russian Customs Union TR CU 020/2011 EMC Technical Regulation
EAC Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
SERIAL
SA Power
The 5069-SERIAL module does not draw current from the
SA power bus.
Still, the module is a DC-type module, and you must install it
5069-SERIAL
on a DC SA Power bus.
• If you install modules in a system that use AC SA power
and DC SA power, you must install them on separate SA CH0 TXD
Power buses. CH0 RXD
• You use a 5069-FPD field potential distributor to
CH1 TXD
establish a new SA Power bus in a system. SA Power
CH1 RXD
buses are isolated from each other. To keep the
modules on separate SA Power buses, complete these
steps.
1. Install the modules that use one type of SA power, for
CHANNEL 0
ISOLATED
example DC, to the right of the adapter or controller, Channel 0 Communication Port
that is, the first SA Power bus.
2. Install the 5069-FPD field potential distributor to
establish a second SA Power bus.
3. Install the modules that use the other type of SA
power, for example AC, on the second SA Power bus.
CHANNEL 1
Module 24V DC
DC-DC
Power
Converter
Supply MOD
Power 5
0
Status 6
Indicators 9
B
a
c
Dsub 9-pin Communication IC Backplane
Isolator k
Connector Communication p
l
ASIC a
n
Dsub 9-pin Communication IC e
Isolator
Connector
9 - - - -
9 9 9
9 9 9
1 DCD 1
2 RXD TXD 2
3 TXD RXD 3
4 DTR RTS 4
5 COM CTS 5
6 DSR DSR 6
7 RTS COM 7
8 CTS DCD 8
9 DTR 20
1 DCD 1
2 RXD TXD 2
3 TXD RXD 3
4 DTR RTS 4
5 COM CTS 5
6 DSR DSR 6
7 RTS COM 7
8 CTS DCD 8
9 DTR 20
5069-SERIAL to DTE Device (9-pin or 25-pin) with “Full or Half-duplex” or Null Modem
9 9 9
9 - - -
IMPORTANT Place the termination resistor between RxD+ and RxD- to implement this wiring.
1 1
2 RXD+ RXD+ 2
3 TXD+ TXD+ 3
4 4
5 COM COM 5
6 6
7 TXD- TXD- 7
8 RXD- RXD- 8
9 9
9 - - -
IMPORTANT Place the termination resister between TRXD+ and TRXD- to implement this wiring.
1 1
2 2
3 TRXD+ TRXD+ 3
4 4
5 COM COM 5
6 6
7 TRXD- TRXD- 7
8 8
9 9
Certifications - 5069-SERIAL
Certifications(1) 5069-SERIAL
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E322657.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E334470.
European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
CE • EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2014/35/EU LVD, compliant with:
• EN 61010-2-201; Control Equipment Safety Requirements
European Union 2011/65/EU RoHS, compliant with:
• EN 50581; Technical documentation
Australian Radiocommunications Act, compliant with:
RCM
• EN 61000-6-4; Industrial Emissions
European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
Ex • EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4X Gc
• DEMKO15ATEX1484X
Certifications - 5069-SERIAL
Certifications(1) 5069-SERIAL
IECEx System, compliant with:
• IEC 60079-0; General Requirements
IECEx • IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4X Gc
• IECEx UL 15.0055X
Korean Registration of Broadcasting and Communications Equipment, compliant with:
KC
• Article 58-2 of Radio Waves Act, Clause 3
EAC Russian Customs Union TR CU 020/2011 EMC Technical Regulation
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
DC Wiring AC Wiring
5069-FPD 5069-FPD
+ +
12/24V DC + 120/240V AC +
– –
– –
Ground Ground
Ground Ground
Certifications - 5069-FPD
Certifications(1) 5069-FPD
UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
c-UL-us UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
CE • EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2014/35/EU LVD, compliant with:
• EN 61010-2-201; Control Equipment Safety Requirements
European Union 2011/65/EU RoHS, compliant with:
• EN 50581; Technical documentation
Australian Radiocommunications Act, compliant with:
RCM EN 61000-6-4; Industrial Emissions
European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
Ex
• II 3 G Ex nA IIC T4 Gc
• DEMKO 15 ATEX 1455X
When used at or below 125V AC
IECEx System, compliant with:
• IEC 60079-0; General Requirements
• IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
IECEx
• II 3 G Ex nA IIC T4 Gc
• IECEx UL 15.0007X
When used at or below 125V AC
Korean Registration of Broadcasting and Communications Equipment, compliant with:
KC Article 58-2 of Radio Waves Act, Clause 3
Russian Customs Union TR CU 020/2011 EMC Technical Regulation
EAC Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
5069-ARM Module
ADDRESS RESERVE
5069-ARM
The following figure shows a functional block diagram for the 5069-ARM module.
5
Module 24V DC 0
Status
Power Supply 6
Indicators
MOD 9
Power
B
Backplane a
Communication c
k
Backplane p
ASIC l
Nonvolatile a
Memory n
e
Certifications - 5069-ARM
Certifications(1) 5069-ARM
UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
c-UL-us UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
CE • EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2011/65/EU RoHS, compliant with:
• EN 50581; Technical documentation
Australian Radiocommunications Act, compliant with:
RCM EN 61000-6-4; Industrial Emissions
European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
Ex
• II 3 G Ex nA IIC T4 Gc
• DEMKO 15 ATEX 1455X
When used at or below 125V AC
IECEx System, compliant with:
• IEC 60079-0; General Requirements
• IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
IECEx
• II 3 G Ex nA IIC T4 Gc
• IECEx UL 15.0007X
When used at or below 125V AC
Korean Registration of Broadcasting and Communications Equipment, compliant with:
KC Article 58-2 of Radio Waves Act, Clause 3
Russian Customs Union TR CU 020/2011 EMC Technical Regulation
EAC Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
+
24V DC
–
+/L
–/N
Ground
The following figure shows a wiring diagram for how to connect SA power (DC) to the 5069-AENTR and 5069-AENTRK EtherNet/IP adapters.
+/L
DC Power Source
–/N
Ground
The following figure shows a wiring diagram for how to connect SA power (AC) to the 5069-AENTR and 5069-AENTRK EtherNet/IP adapters.
+/L
AC Power Source
–/N
Ground
24V DC +
–
–
M OD Power
SA Power
Compact 5000™ I/O
The following figure shows a wiring diagram for how to connect SA power (DC) to the 5069-AEN2TR EtherNet/IP adapter.
M O D Power
S A Power
DC Power Source +
Compact 5000™ I/O
–
–
Ground
Ground
The following figure shows a wiring diagram for how to connect SA power (AC) to the 5069-AEN2TR EtherNet/IP adapter.
M OD Power
SA Power
+
AC Power Source +
Compact 5000™ I/O
–
–
Ground
Ground
Technical Specifications
Attribute 5069-AEN2TR
Enclosure type rating None (open-style)
Voltage and current ratings
MOD Power 450 mA @ 18…32V DC
MOD Power inrush 850 mA for 125 ms
MOD Power Passthrough, max(1) 9.55 A @ 18…32V DC
10 mA @ 0…32V DC
SA Power 25 mA @ 0…240V AC, 47…63 Hz
ATEX/IECEx, 125V AC Max
9.95 A @ 0…32V DC
9.975 A @ 0…240V AC, 47…63 Hz
SA Power Passthrough, max(2) ATEX/IECEx, 125V AC Max
Do not exceed 10 A current draw at the MOD or SA Power RTB.
Recommended external overcurrent protection N/A
Power dissipation, max 8.5 W
Thermal dissipation, max 29 BTU/hr
250V (continuous), basic insulation type, SA, and MOD Power to backplane
250V (continuous), basic insulation type, SA to MOD Power
250V (continuous), basic insulation type, Ethernet to backplane
250V (continuous), double insulation type, Ethernet to MOD Power
250V (continuous), double insulation type, Ethernet to SA Power
Isolation voltage 50V (continuous), functional insulation type, Ethernet to USB
250V (continuous), basic insulation type, USB to backplane
250V (continuous), double insulation type, USB to MOD Power
250V (continuous), double insulation type, USB to SA Power
No isolation between Ethernet ports
Type tested at 1500V AC for 60 s
Module keying Electronic keying via programming software
Dimensions (HxWxD), approx 138 x 98 x 137 mm (5.43 x 3.86 x 5.39 in.)
Technical Specifications
Attribute 5069-AEN2TR
RTBs are available in separately ordered 5069 RTB kits. The MOD power connection uses a 4-point RTB, and the SA
power connection uses a 6-point RTBs. The following kits are available:
• Kit catalog number 5069-RTB64-SCREW contains RTB catalog numbers 5069-RTB6-SCREW and 5069-RTB4-SCREW
RTB
• Kit catalog number 5069-RTB64-SPRING contains RTB catalog numbers 5069-RTB6-SPRING and 5069-RTB4-SPRING
IMPORTANT: You must order RTBs separately. RTBs do not ship with Compact 5000 I/O EtherNet/IP adapters. We
recommend that you order only the RTB type that your system requires.
RTB torque (5069-RTB4-SCREW and 5069-RTB6- 0.4 N•m (3.5 lb•in)
SCREW only)
RTB keying None
3 - on USB port
Wiring category(3) 2 - on power ports
2 - on Ethernet ports
Wire size
5069-RTB4-SPRING, 5069-RTB6-SPRING 0.5...1.5 mm2 (22…16 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 2.9 mm (0.11 in.) max
diameter including insulation, single wire connection only
5069-RTB4-SCREW, 5069-RTB6-SCREW 0.5...1.5 mm2 (22…16 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 3.5 mm (0.14 in.) max
diameter including insulation, single wire connection only
Ethernet connections Ethernet Cabling and Installation according to IEC 61918 and IEC 61784-5-2
Insulation stripping length
5069-RTB4-SPRING, 5069-RTB6-SPRING 10 mm (0.39 in.)
connections
5069-RTB4-SCREW, 5069-RTB6-SCREW 12 mm (0.47 in.)
connections
North American temp code T4
ATEX temp code T4
IECEx temp code T4
(1) Maximum level of MOD Power current that the adapter can pass through to the next module in the system.
(2) Maximum level of SA Power current that the adapter can pass through to the next module in the system.
(3) Use this Conductor Category information for planning conductor routing. See the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
Environmental Specifications
Attribute 5069-AEN2TR
Temperature, operating
IEC 60068-2-1 (Test Ab, Operating Cold),
IEC 60068-2-2 (TestBb, Unpackaged Nonoperating 0…60 °C (32…140 °F)
Dry Heat),
IEC 60068-2-14 (Test Na, Operating Thermal Shock)
Temperature, surrounding air, max 60 °C (140 °F)
Temperature, nonoperating
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating
Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating -40…+85 °C (-40…+185 °F)
Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating
Thermal Shock)
Relative humidity 5…95% noncondensing
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat)
Vibration 5 g @ 10…500 Hz
IEC 60068-2-6 (Test Fc, Operating)
Shock, operating 30 g
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
Shock, nonoperating 50 g
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
Emissions IEC 61000-6-4
ESD immunity 6 kV contact discharges
IEC61000-4-2 8 kV air discharges
Environmental Specifications
Attribute 5069-AEN2TR
10V/m with 1 kHz sine-wave 80% AM from 80…2000 MHz
Radiated RF immunity 10V/m with 200 Hz 50% Pulse 100% AM at 900 MHz
IEC61000-4-3 10V/m with 200 Hz 50% Pulse 100% AM at 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 2000…2700 MHz
EFT/B immunity ±4 kV @ 5 kHz on power ports
IEC 61000-4-4 ±2 kV @ 5 kHz on Ethernet ports
Surge transient immunity ±1 kV line-line (DM) and ±2 kV line-earth (CM) on power ports
IEC 61000-4-5 ±2 kV line-earth (CM) on Ethernet ports
Conducted RF immunity 10V rms with 1 kHz sine-wave 80% AM from 150 kHz…80 MHz on power and Ethernet ports
IEC 61000-4-6
Voltage variation 10 ms interruption on MOD Power port
IEC 61000-4-29
Certifications
Certifications(1) 5069-AEN2TR
UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
c-UL-us UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
CE • EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2014/35/EU LVD, compliant with:
• EN 61010-2-201; Control Equipment Safety Requirements
European Union 2011/65/EU RoHS, compliant with:
• EN 50581; Technical documentation
Australian Radiocommunications Act, compliant with:
RCM EN 61000-6-4; Industrial Emissions
European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements
Ex
• II 3 G Ex nA IIC T4 Gc
• DEMKO 15 ATEX 1455X
When used at or below 125V AC
IECEx System, compliant with:
• IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
• IEC 60079-0; General Requirements
IECEx
• II 3 G Ex nA IIC T4 Gc
• IECEx UL 15.0007X
When used at or below 125V AC
Korean Registration of Broadcasting and Communications Equipment, compliant with:
KC Article 58-2 of Radio Waves Act, Clause 3
Russian Customs Union TR CU 020/2011 EMC Technical Regulation
EAC Russian Customs Union TR CU 004/2011 LV Technical Regulation
EtherNet/IP ODVA conformance tested to EtherNet/IP specifications
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
The minimum distance between the controller system and enclosure walls, wireways, and adjacent equipment varies based on current
operating temperatures.
Top
CompactLogix 5480 Controller
Compact GuardLogix 5380,
CompactLogix 5380,
Side Side
Bottom
For more information on how to install a CompactLogix 5380, Compact GuardLogix 5380, and CompactLogix 5480 controller system, see
these publications:
• CompactLogix 5380 Controllers Installation Instructions, publication 5069-IN013
• Compact GuardLogix 5380 SIL 2 Controllers Installation Instructions, publication 5069-IN014
• CompactLogix 5480 Controllers Installation Instructions, publication 5069-IN019
The minimum distances on all sides of the adapter system are as follows:
• 25.40 mm (1.00 in) - If the system uses only Compact 5000 I/O standard modules.
• 50.80 mm (2.00 in) - If the system uses at least one Compact 5000 I/O safety module.
Top
Top
EtherNet/IP Adapter
Compact 5000 I/O
Side Side
Bottom
Bottom
For more information on how to install a Compact 5000 I/O EtherNet/IP adapter system, see the Compact 5000 I/O EtherNet/IP Adapters
Installation Instructions, publication 5069-IN003.
Notes:
Additional Resources
These documents contain additional information concerning related products from Rockwell Automation.
Resource Description
Compact 5000 I/O Digital Modules User Manual, Describes how to configure and operate Compact 5000™ I/O digital modules.
publication 5069-UM004
Compact 5000 I/O Analog Modules User Manual, Describes how to configure and operate Compact 5000 I/O analog modules.
publication 5069-UM005
Compact 5000 I/O High-speed Counter Module User Describes how to configure and operate the Compact 5000 I/O high-speed counter module.
Manual, publication 5069-UM006
Compact 5000 I/O Serial Module User Manual, Describes how to configure and operate Compact 5000 serial modules.
publication 5069-UM003
CompactLogix 5380 and Compact GuardLogix 5380 Describes how to configure and operate CompactLogix™ 5380 and Compact GuardLogix® 5380 controllers.
Controllers User Manual, publication 5069-UM001
CompactLogix 5480 Controllers User Manual, Describes how to configure and operate CompactLogix 5480 controllers.
publication 5069-UM002
Compact 5000 EtherNet/IP Adapters User Manual, Describes how to configure and operate the Compact 5000 I/O EtherNet/IP™ adapters.
publication 5069-UM007
Industrial Automation Wiring and Grounding Provides general guidelines for installing a Rockwell Automation® industrial system.
Guidelines, publication 1770-4.1
Product Certifications website, http://
www.rockwellautomation.com/global/certification/ Provides declarations of conformity, certificates, and other certification details.
overview.page
Technical Support Center Find help with how-to videos, FAQs, chat, user forums, and product notification updates. rok.auto/support
Knowledgebase Access Knowledgebase articles. rok.auto/knowledgebase
Local Technical Support Phone Numbers Locate the telephone number for your country. rok.auto/phonesupport
Literature Library Find installation instructions, manuals, brochures, and technical data publications. rok.auto/literature
Product Compatibility and Download Center Get help determining how products interact, check features and capabilities, and find rok.auto/pcdc
(PCDC) associated firmware.
Documentation Feedback
Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the
form at rok.auto/docfeedback.
Allen-Bradley, Compact 5000, CompactLogix, expanding human possibility, GuardLogix, Logix 5000, Rockwell Automation, Rockwell Software, and Studio 5000 Logix Designer are trademarks of
Rockwell Automation, Inc.
EtherNet/IP is a trademark of ODVA, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Automation maintains current product environmental information on its website at rok.auto/pec.
Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat:6 34752, İçerenkÖy, İstanbul, Tel: +90 (216) 5698400 EEE YÖnetmeliğine Uygundur
CATÁLOGO
www.walworth.com
ÍNDICE
Introducción
594-0007
www.walworth.com 3
WALWORTH
WALWORTH es una compañía fabricante de válvulas industriales
considerada entre las más importantes de todo el mundo. Desde
su fundación en el siglo XIX por James WALWORTH, ha enfocado
sus esfuerzos en innovar y producir diferentes líneas de productos
para el control de fluidos.
VALORES WALWORTH
MISIÓN VISIÓN
WALWORTH es un fabricante de válvulas y componentes Para ser un líder mundial y referente en la manufactura de
de clase mundial para la Industria del control de fluidos válvulas, WALWORTH:
ofreciendo un servicio excepcional, precios competitivos y • Define los estándares de calidad en la industria del
una consistente puntualidad en los tiempos de entrega. control de fluidos.
• Excede las expectativas de los clientes sobre el
servicio.
• Forja relaciones duraderas con clientes, miembros del
equipo WALWORTH y la comunidad.
• Emplea, desarrolla y retiene a miembros del equipo
que se caracterizan por su experiencia y dedicación.
4 www.walworth.com
CONTROL DE DISEÑO WALWORTH
Los productos Walworth son fabricados de acuerdo a un
estricto seguimiento de las normas más importantes a nivel
mundial como API, ANSI, ASME, ASTM, MSS, NACE, AWWA,
BSI, CSA, entre otros. Nuestro equipo de Ingeniería siempre está
estudiando las nuevas actualizaciones de éstas normas para
incorporar cualquier cambio que afecte al diseño, regulaciones
o desempeño de nuestros productos, siendo siempre líderes en
los nuevos desarrollos obtenidos.
El sistema requiere de un riguroso Control de Calidad y selección de materia prima proveniente de proveedores aprobados, así
como el control de los procesos de manufactura. Con el número de serie, Walworth es capaz de monitorear el producto en su
proceso de fabricación y proporciona información de rastreabilidad de los materiales empleados en cada válvula. A continuación
se muestran algunas de las principales certificaciones:
www.walworth.com 5
Certificado API-594
Emitido por el Instituto Americano del Petróleo para
válvulas de retención tipo A y B fabricadas de acuerdo a la
especificación API-594.
Certificado API-600
Emitido por el Instituto Americano del Petróleo para válvulas
de compuerta en acero de bonete bridado fundido, fabricadas
de acuerdo a la especificación API-600.
6 www.walworth.com
Constancia de calificación de proveedor No. 279/13 Certificado NMX-CC-9001 (Norma Mexicana ISO-9001) No.
Emitido por el Laboratorio de Pruebas de Equipos y Materiales 0552/2007 Emitido por PEMEX de acuerdo a la ISO-9001 de
(LAPEM) de la Comisión Federal de Electricidad (CFE). Aseguramiento de Calidad.
Certificado de Emisiones Fugitivas de 500 ciclos para Certificado de Emisiones Fugitivas de 500 ciclos para
válvulas de compuerta de 3” clase 300# válvulas de compuerta de 8” clase 300#
Emitido por Yarmouth Research and Technology, que califican Emitido por Yarmouth Research and Technology, que
toda la gama de productos de Acero Fundido. califican toda la gama de productos de Acero Fundido.
www.walworth.com 7
Certificado de Emisiones Fugitivas Bajas No. 20985-3, 8 y 16 Certificado TÜV Rheinland TRASA 700-13-0019
de acuerdo a la ISO-15848-1 “Válvulas Industriales” Válvulas esféricas con montaje Trunnion API-6D esfera guiada
Medición, Prueba y Calificación en los procedimientos para y cuerpo abulonado de acero al carbono (A105 - WCB) función
emisiones fugitivas. “Parte 1: Clasificación y Calificación de Doble Bloqueo y Purga.
procedimientos para prueba de válvulas”.
Certificado de pruebas de fuego No. 01-1/05 Certificado de aprobación Ta Luft (emisiones fugitivas)
De acuerdo a API-6FA y API para válvulas de Bola de acuerdo a ISO-5211 en la brida superior, y dispositivo antiestático.
API-6D.
8 www.walworth.com
EQUIPO DE CONTROL DE CALIDAD
Para asegurar que los productos Walworth cumplen con las normas internacionales, contamos con equipo profesional de monitoreo
de calidad, algunos de los cuales se describen a continuación:
www.walworth.com 9
Laboratorio de Metrología.- WALWORTH desarrolló un sistema de verificación
y calibración de todo el equipo utilizado en nuestras instalaciones, para asegurar la
rastreabilidad de las mediciones contra patrones internacionalmente reconocidos.
De esta manera, se mantiene un control en las mediciones realizadas durante
la fabricación, asegurando que se cumple con las normas internacionales más
importantes.
10 www.walworth.com
VÁLVULA TIPO WAFER DUAL PLATE
(HIERRO Y ACERO FUNDIDO)
Ventajas de diseño
La válvula de retención DUAL PLATE es una válvula para uso general que desarrolla el trabajo de casi cualquier válvula de retención
convencional. Sin embargo, al ser de menor tamaño, es más ligera y por lo mismo menos costosa en sí y en su instalación y man-
tenimiento; además, es una válvula de retención silenciosa que no golpea al cerrar, por su novedoso diseño.
El diseño de las dos placas y el asiento plano de la válvula DUAL PLATE ofrece muchas más ventajas. El asiento plano elimina
cualquier posibilidad de que la placa se encaje en el asiento, lo cual ocurre con frecuencia en otras válvulas de retención. Las dos
placas suspendidas en un perno vertical, permite reducir el peso de ellas y también elimina el desgaste excesivo de las orejas de la
placa. Este desgaste puede provocar la caída de la placa en relación a la superficie del asiento quedando abierta, con la subsecuente
falla de la válvula.
Una importante característica de la válvula DUAL PLATE, es que no depende de la presión ni del flujo para centrar las placas en
relación a la superficie selladora, para que se efectúe el sellado. Los diseños convencionales de una sola placa, no obstante que
cuenten con guías de centrado, requieren de una contrapresión y un flujo contrario para centrar el plato con respecto al asiento y
así poder efectuar el ajuste sin fugas. Esta característica se torna extremadamente arriesgada en los casos de flujo reducido y el
manejo de gases a baja presión.
www.walworth.com 11
VÁLVULA TIPO WAFER LUG DUAL PLATE
Ventajas de diseño
La válvula de retención tipo LUG DUAL PLATE, al igual que las Wafer, da una máxima resistencia con el mínimo tiempo de apertura
gracias a la ayuda de los resortes.
El perno tope evita el exceso de viaje de los discos.
Este diseño también es hermético, es decir, que se eliminaron los barrenos en el cuerpo, ya que ahora los pernos van sobre un
soporte, el cual va fijo al cuerpo, reduciendo así las posibilidades de fuga.
La válvula de retención tipo LUG DUAL PLATE cubre el perno en toda la longitud del cuerpo.
Las válvulas tipo LUG son suministradas en venera para mantener el mínimo peso posible, lo que las hace de bajo costo.
Las válvulas tipo LUG son suministradas con barrenos pasados de acuerdo a API-594.
Nota:
1. Para mayor información contactar a la planta.
12 www.walworth.com
MATERIALES MÁS COMUNES DEL CUERPO
Norma del material Designación común Especificación de forja Especificación de barra Servicios recomendados (1)
Acero al Carbón para baja Servicio a baja temperatura bajo -50 °F (-46°C). No
ASTM A352 Grado LCB A350 LF1 A350 LF1
temperatura para uso arriba de + 650°F(+340°C).
Acero al Carbón para baja Servicio a baja temperatura bajo -50 °F (-46°C). No
ASTM A352 Grado LCC A350 LF2 A350 LF2
temperatura para uso arriba de + 650°F(+340°C).
W1 Discos de Ac. Inox. A351 Gr. CF8, Perno de Ac. Inox. A276 Gr. 410, Perno Tope A276 Gr. 410
W2 Discos de Ac. Inox. A351 Gr. CF8, Perno de Ac. Inox. A276 Gr. F304, Perno Tope A276 Gr. F304
W3 Discos de Ac. Inox. A351 Gr. CF8M, Perno de Ac. Inox. A276 Gr. F316, Perno Tope A276 Gr. F316
W4 Discos de Ac. Inox. A351 Gr. CF3, Perno de Ac. Inox. A276 Gr. F304L, Perno Tope A276 Gr. F304L
W5 Discos de Ac. Inox. A351 Gr. CF3M, Perno de Ac. Inox. A276 Gr. F316L, Perno Tope A276 Gr. F316L
W6 Discos de Ac. Inox. Duplex A995 Gr. CD3MN, Perno de Ac. Inox. Duplex A182 Gr. F51, Perno Tope A182 Gr. F51
www.walworth.com 13
COMPOSICIÓN QUÍMICA DE LOS MATERIALES MÁS COMUNES
Composición química y propiedades mecánicas
Acero al carbón Acero bajo carbono Aceros baja aleación Aceros inoxidables
Carbono (C) 0.30 0.25 0.30 0.25 0.05-0.20 0.05-0.18 0.08 0.08 0.08
Fósforo (P) 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04
Azufre (S) 0.045 0.045 0.045 0.045 0.045 0.045 0.04 0.04 0.04
Cromo (Cr) 0.5 0.5 0.5 0.5 1.00-1.50 2.00-2.75 18.00-21.0 18.00-21.0 18.00-21.0
Molibdeno (Mo) 0.2 0.2 0.2 0.2 0.45-0.65 0.90-1.20 0.5 2.00-3.00 0.5
70,000- 70000-
Tensión PSI (mínimo) 70,000 65,000 70,000 70,000 70,000 70,000 70,000
95,000 95,000
Cedencia PSI (mínimo) 36,000 40,000 35,000 40,000 40,000 40,000 30,000 30,000 30,000
Notas:
1. El porcentaje (%) mostrado sobre los elementos es el máximo excepto donde los rangos están indicados.
2. Pare el acero inoxidable CF8C se deberá tener un contenido de Columbio de no menos de 8 veces el contenido de carbono, pero sin exceder de 1%.
14 www.walworth.com
VÁLVULA TIPO WAFER DUAL PLATE
Características de Diseño
• Diseño de acuerdo con API 594 1 Cuerpo. Es de menos de 10% del peso de una válvula
• Dimensión de extremo a extremo de acuerdo a API 594 convencional de retención bridada.
• Dimensiones de bridas según ASME B16.5, ASME B16.47 2 Asientos. Disponibilidad de asientos suaves y Metal-Metal.
• Inspección y pruebas según API 598 3 Los discos en conjunto con los resortes, ofrecen un cierre
• Servicio NACE MR-0175 hermético dando un mayor rendimiento.
• Disponibilidad de Diseño LUG 4 Los resortes dan una mejor respuesta al cierre.
• Disponibilidad de Brida Doble a partir de 12” 5 La flecha mantiene los discos en su posición, evitando las vibraciones.
• Resorte Simple para medidas de 2” a 6” 6 La flecha y perno tope van montados en un soporte y no a través
• Resorte Doble para medidas de 8” en adelante de barrenos en el cuerpo, dándole hermeticidad a la válvula.
3 Discos Cuerpo 1
4 Resortes Asientos 2
6 Perno tope
Flecha 5
www.walworth.com 15
VÁLVULA TIPO WAFER DUAL PLATE
CLASE 150
Características de Diseño
• Diseño de acuerdo con API 594 • Servicio NACE MR-0175
• Dimensión de extremo a extremo de acuerdo a API 594 • Tuerca de izaje para medidas de 8” en adelante
• Dimensiones de bridas según ASME B16.5, ASME B16.47 • Resorte Simple para medidas de 2” a 6”
• Inspección y pruebas según API 598 • Resorte Doble para medidas de 8” en adelante
10
10
16 www.walworth.com
VÁLVULA TIPO WAFER DUAL PLATE
CLASE 150
D
D1 D2
D3
L1
Pesos y Dimensiones
Tamaño
Dimensión Brida
Presión / nominal
Peso
Estándar de
(Kg) No. de Diámetro de perno (d) Longitud de perno (L1)
brida NPS CN L D1 D2 D D3
pernos pulg. mm RF RJ
2 50 60 103 56 51 2 120.5 4 5/8 M16 140 155
2 1/2 65 67 122 73 65 3 139.5 4 5/8 M16 150 165
3 80 73 135 88 80 4 152.5 4 5/8 M16 160 175
4 100 73 173 108 102 6 190.5 8 5/8 M16 170 185
5 125 86 195 132 127 8 216 8 3/4 M20 190 205
6 150 98 220 160 152 13 241.5 8 3/4 M20 205 220
Clase 150 PN2,0/ 8 200 127 277 210 203 25 298.5 8 3/4 M20 240 255
ASME B16.5 10 250 146 337 266 254 39 362 12 7/8 M24 270 285
12 300 181 407 310 305 54 432 12 7/8 M24 310 325
14 350 184 448 355 350 80 476 12 1 M27 325 340
16 400 191 512 405 400 117 540 16 1 M27 340 355
18 450 203 547 455 450 138 578 16 1 1/8 M30 365 380
20 500 219 604 505 500 163 635 20 1 1/8 M30 385 400
24 600 222 715 605 600 331 749.5 20 1 1/4 M33 405 420
26 650 222 770 650 633 380 806.5 24 1 1/4 M33 450 -
28 700 305 827 700 700 400 863.5 28 1 1/4 M33 535 -
30 750 305 878 750 746 440 914.5 28 1 1/4 M33 545 -
32 800 305 935 800 796 580 978 28 1 1/2 M39x3 570 -
36 900 368 1045 894 874 660 1086 32 1 1/2 M39x3 650 -
Clase 150 PN2,0/ 40 1000 432 1167 985 976 890 1200 36 1 1/2 M39x3 710 -
ASME B16.47A o
MSS SP-44 42 1050 432 1213 1055 1050 980 1257.5 36 1 1/2 M39x3 730 -
44 1100 432 1274 1070 1070 1150 1314.5 40 1 1/2 M39x3 730 -
48 1200 524 1397 1205 1166 1450 1422.5 44 1 1/2 M39x3 840 -
54 1350 591 1545 1315 1312 2300 1594 44 1 3/4 M45x3 950 -
56 1400 591 1602 1370 1360 2800 1651 48 1 3/4 M45x3 955 -
60 1500 660 1701 1470 1458 3220 1759 52 1 3/4 M45x3 1040 -
www.walworth.com 17
VÁLVULA TIPO WAFER DUAL PLATE
CLASE 300
Características de Diseño
• Diseño de acuerdo con API 594 • Servicio NACE MR-0175
• Dimensión de extremo a extremo de acuerdo a API 594 • Tuerca de izaje para medidas de 8” en adelante
• Dimensiones de bridas según ASME B16.5, ASME B16.47 • Resorte Simple para medidas de 2” a 6”
• Inspección y pruebas según API 598 • Resorte Doble para medidas de 8” en adelante
10
18 www.walworth.com
VÁLVULA TIPO WAFER DUAL PLATE
CLASE 300
d
D
D1 D2
D3
L1
L
Pesos y Dimensiones
Tamaño
Dimensión Brida
Presión / nominal
Peso
Estándar de
(Kg) No. de Diámetro de perno (d) Longitud de perno (L1)
brida NPS CN L D1 D2 D D3
pernos pulg. mm RF RJ
2 50 60 110 58 51 3 127 8 5/8 M16 155 175
2 1/2 65 67 128 73 65 4 149 8 3/4 M20 175 195
3 80 73 147 88 80 6 168.5 8 3/4 M20 190 210
4 100 73 179 108 102 8 200 8 3/4 M20 195 215
5 125 86 214 132 127 15 235 8 3/4 M20 215 235
6 150 98 249 160 152 18 270 12 3/4 M20 230 250
Clase 300 PN5,0/ 8 200 127 305 210 203 31 330 12 7/8 M24 280 300
ASME B16.5 10 250 146 359 266 254 51 387.5 16 1 M27 315 335
12 300 181 420 310 305 77 451 16 1 1/8 M30 365 385
14 350 222 483 355 350 117 514.5 20 1 1/8 M30 410 430
16 400 232 537 405 400 190 571.5 20 1 1/4 M33 435 455
18 450 264 594 455 450 200 628.5 24 1 1/4 M33 475 495
20 500 292 652 505 500 265 686 24 1 1/4 M33 510 535
24 600 318 772 608 600 410 813 24 1 1/2 M39x3 560 585
26 650 356 767 640 633 560 803 32 1 1/4 M33 625 -
28 700 368 821 985 685 580 857 36 1 1/4 M33 635 -
30 750 368 882 740 735 660 921 36 1 3/8 M36x3 650 -
32 800 368 936 784 784 970 978 32 1 1/2 M39x3 675 -
Clase 300 PN5,0/ 36 900 483 1044 880 873 1010 1089 32 1 5/8 M42x3 800 -
ASME B16.47B o
API605 40 1000 546 1146 985 976 1420 1191 40 1 5/8 M42x3 885 -
42 1050 568 1196 1045 1035 1540 1244.5 36 1 3/4 M45x3 920 -
48 1200 629 1365 1190 1166 2250 1416 40 1 7/8 M48x3 1010 -
54 1350 718 1526 1315 1312 3100 1578 48 1 7/8 M48x3 1140 -
60 1400 838 1704 1470 1458 4310 1764 40 2 1/4 M56x3 1280 -
26 650 356 831 640 633 580 876 28 1 5/8 M42x3 625 -
28 700 368 895 985 685 600 940 28 1 5/8 M42x3 650 -
30 750 368 949 740 735 680 997 28 1 3/4 M45x3 665 -
32 800 368 1003 784 784 990 1054 28 1 7/8 M48x3 685 -
Clase 300 PN5,0/ 36 900 483 1113 880 873 1050 1168.5 32 2 M52x3 820 -
ASME B16.47A o
MSS SP-44 40 1000 546 1110 985 976 1400 1156 32 1 5/8 M42x3 885 -
42 1050 568 1161 1045 1035 1520 1206.5 32 1 5/8 M42x3 915 -
48 1200 629 1320 1190 1166 2250 1371.5 32 1 7/8 M48x3 1015 -
54 1350 718 1489 1315 1312 3050 1594.5 28 2 1/4 M56x3 1160 -
60 1400 838 1642 1470 1458 4300 1702 32 2 1/4 M56x3 1305 -
www.walworth.com 19
VÁLVULA TIPO WAFER DUAL PLATE
CLASE 600
Características de Diseño
• Diseño de acuerdo con API 594 • Servicio NACE MR-0175
• Dimensión de extremo a extremo de acuerdo a API 594 • Tuerca de izaje para medidas de 6” en adelante
• Dimensiones de bridas según ASME B16.5, ASME B16.47 • Resorte Simple para medidas de 2” a 6”
• Inspección y pruebas según API 598 • Resorte Doble para medidas de 8” en adelante
10
10
20 www.walworth.com
VÁLVULA TIPO WAFER DUAL PLATE
CLASE 600
D1 D D2
D3
L1
Pesos y Dimensiones
Tamaño nominal Dimensión Brida
Presión /
Peso
Estándar de No. de Diámetro de perno (d) Longitud de perno (L1)
NPS CN L D1 D2 D (Kg) D3
Brida pernos pulg. mm RF RJ
2 50 60 110 58 51 4 127 8 5/8 M16 175 180
2 1/2 65 67 128 73 65 5 149 8 3/4 M20 195 200
3 80 73 147 88 80 8 168.5 8 3/4 M20 210 215
4 100 79 191 108 102 11 216 8 7/8 M24 235 240
5 125 105 139 136 127 20 267 8 1 M27 280 285
6 150 136 264 162 152 26 292 12 1 M27 320 325
Clase 600 PN11,0/ 8 200 165 318 212 200 55 349 12 1 1/8 M30 370 375
ASME B16.5 10 250 213 398 266 250 95 432 16 1 1/4 M33 440 445
12 300 229 455 312 305 140 489 20 1 1/4 M33 460 465
14 350 273 490 355 337 223 527 20 1 3/8 M36x3 520 525
16 400 305 562 400 387 360 603 20 1 1/2 M39x3 575 580
18 450 362 610 450 438 395 654 20 1 5/8 M42x3 650 655
20 500 368 680 500 489 518 724 24 1 5/8 M42x3 670 680
24 600 438 786 600 591 836 838 24 1 7/8 M48x3 780 790
26 650 457 761 640 633 950 806.5 28 1 5/8 M42x3 790 805
Clase 600 PN11,0/ 28 700 483 815 690 684 1210 863.5 28 1 3/4 M45x3 830 845
ASME B16.47B o 30 750 505 875 740 735 1370 927 28 1 7/8 M48x3 875 890
API605 32 800 533 928 784 779 1640 984 28 2 M52x3 920 940
36 900 635 1045 880 874 2120 1105 28 2 1/4 M56x3 1065 1085
26 650 457 863 640 633 980 915.5 28 1 7/8 M48x3 795 810
28 700 483 910 690 684 1250 965 28 2 M52x3 835 850
30 750 505 967 740 735 1420 1022.5 28 2 M52x3 860 905
Clase 600 PN11,0/ 32 800 533 1020 784 779 1700 1079.5 28 2 1/4 M56x3 905 925
ASME B16.47A o
MSS SP-44 36 900 635 1126 880 874 2200 1194 28 2 1/2 M64x3 1035 1055
40 1000 660 1153 985 976 2650 1213 32 2 1/4 M56x3 1115 -
42 1050 702 1215 1030 1020 3120 1283 28 2 1/2 M64x3 1190 -
48 1200 787 1386 1170 1166 3720 1460.5 32 2 M70x3 1330 -
www.walworth.com 21
VÁLVULA TIPO WAFER DUAL PLATE
CLASE 900
Características de Diseño
• Diseño de acuerdo con API 594 • Servicio NACE MR-0175
• Dimensión de extremo a extremo de acuerdo a API 594 • Tuerca de izaje para medidas de 6” en adelante
• Dimensiones de bridas según ASME B16.5, ASME B16.47 • Resorte Simple para medidas de 2” a 6”
• Inspección y pruebas según API 598 • Resorte Doble para medidas de 8” en adelante
10
10
22 www.walworth.com
VÁLVULA TIPO WAFER DUAL PLATE
CLASE 900
D1 D D2
D3
L1
Pesos y Dimensiones
Tamaño nominal Dimensión Brida
Presión /
Peso Longitud de perno
Estándar de No. de Diámetro de perno (d)
NPS CN L D1 D2 D (Kg) D3 (L1)
Brida pernos
pulg. mm RF RJ
2 50 70 140 58 51 8 165 8 7/8 M24 225 230
2 1/2 65 83 162 73 65 11 190.5 8 1 M27 250 255
3 80 83 165 90 80 14 190.5 8 7/8 M24 240 245
4 100 102 204 108 102 20 235 8 1 1/8 M30 285 290
5 125 110 245 136 127 30 278.5 8 1 1/4 M33 310 315
6 150 159 286 162 150 42 317.5 12 1 1/8 M30 365 370
Clase 900 PN15,0/ 8 200 206 356 212 200 84 393.5 12 1 3/8 M36x3 440 445
ASME B16.5 10 250 241 432 266 250 145 470 16 1 3/8 M36x3 490 495
12 300 292 495 312 305 220 533.5 20 1 3/8 M36x3 560 565
14 350 356 518 355 337 350 559 20 1 1/2 M39x3 645 655
16 400 384 572 400 387 470 616 20 1 5/8 M42x3 685 695
18 450 451 635 450 438 605 686 20 1 7/8 M48x3 790 805
20 500 451 695 496 487 820 749.5 20 2 M52x3 810 825
24 600 495 835 600 591 1050 901.5 20 7/8 M64x3 945 965
www.walworth.com 23
VÁLVULA TIPO WAFER DUAL PLATE
CLASE 1500
Características de Diseño
• Diseño de acuerdo con API 594 • Servicio NACE MR-0175
• Dimensión de extremo a extremo de acuerdo a API 594 • Tuerca de izaje para medidas de 6” en adelante
• Dimensiones de bridas según ASME B16.5, ASME B16.47 • Resorte Simple para medidas de 2” a 6”
• Inspección y pruebas según API 598 • Resorte Doble para medidas de 8” en adelante
10
10
24 www.walworth.com
VÁLVULA TIPO WAFER DUAL PLATE
CLASE 1500
D1 D D2
D3
L1
Pesos y Dimensiones
Tamaño nominal Dimensión Brida
Presión /
Peso Longitud de perno
Estándar de No. de Diámetro de perno (d)
NPS CN L D1 D2 D (Kg) D3 (L1)
Brida pernos
pulg. mm RF RJ
2 50 70 140 58 51 8 165 8 1 M24 225 230
2 1/2 65 83 162 73 65 11 190.5 8 1 1/8 M27 250 255
3 80 83 172 90 80 19 203 8 1 1/4 M30 270 275
4 100 102 207 108 102 26 241.5 8 1 1/2 M33 310 315
Clase 1500 PN26,0/ 5 125 110 252 136 127 51 292 8 1 3/8 M39 370 375
ASME B16.5 6 150 159 280 162 150 68 317.5 12 1 3/8 M36 430 440
8 200 206 350 212 200 130 393.5 12 1 5/8 M42 510 520
10 250 248 433 266 254 210 482.5 12 1 7/8 M48 600 610
12 300 305 518 312 305 384 517.5 16 2 M52 695 715
14 350 356 576 355 337 550 635 16 2 1/4 M56 775 800
16 400 384 639 400 387 635 705 16 2 1/2 M64 950 880
www.walworth.com 25
VÁLVULA TIPO WAFER DUAL PLATE
CLASE 2500
Características de Diseño
• Diseño de acuerdo con API 594 • Servicio NACE MR-0175
• Dimensión de extremo a extremo de acuerdo a API 594 • Tuerca de izaje para medidas de 6” en adelante
• Dimensiones de bridas según ASME B16.5, ASME B16.47 • Resorte Simple para medidas de 2” a 6”
• Inspección y pruebas según API 598 • Resorte Doble para medidas de 8” en adelante
10
10
26 www.walworth.com
VÁLVULA TIPO WAFER DUAL PLATE
CLASE 2500
D1 D D2
D3
L1
Pesos y Dimensiones
Tamaño nominal Dimensión Brida
Presión /
Peso Longitud de perno
Estándar de No. de Diámetro de perno (d)
NPS CN L D1 D2 D (Kg) D3 (L1)
Brida pernos
pulg. mm RF RJ
2 50 70 143 48 42 10 171.4 8 1 M27 260 260
2 1/2 65 83 166 58 52 18 196.8 8 1 1/8 M30 290 300
3 80 86 194 68 62 26 228.6 8 1 1/4 M33 315 325
4 100 105 232 94 88 40 273 8 1 1/2 M39x3 370 375
Clase 2500 PN42,0/
5 125 110 277 106 100 59 323.8 8 1 3/4 M45x3 420 430
ASME B16.5
6 150 159 315 162 150 90 368.3 8 2 M52x3 515 525
8 200 206 385 186 180 150 438.2 12 2 M52x3 600 615
10 250 254 474 232 225 240 593.8 12 2 1/2 M64x3 760 780
12 300 305 547 272 266 440 619.1 12 2 3/4 M70x3 860 880
www.walworth.com 27
INFORMACIÓN TÉCNICA
Facilidad de instalación
Las pequeñas dimensiones entre caras de la válvula DUAL PLATE permiten su fácil instalación entre bridas estándar. Únicamente un
juego de birlos es necesario de suficiente longitud para abarcar el espacio ocupado por la válvula DUAL PLATE, siendo más rígidas
que un largo equivalente de tubería de pared gruesa, no requiere soportes ni juntas de expansión especiales para su instalación.
28 www.walworth.com
INFORMACIÓN TÉCNICA
Acción Sellante Efectiva
El sello resilente de la válvula DUAL PLATE soporta altas presiones sin sufrir fugas, distorsión o daños como se muestran en la
figura, el elemento sellador está vulcanizado en una ranura en el cuerpo. Este elemento sellador forma un anillo “O”, al cual la presión
deforma hasta lograr un contacto de metal a metal entre la placa y el sello del cuerpo, como se muestra en la figura. El sello está
completamente resguardado para evitar que sufra daños bajo el efecto de la presión.
www.walworth.com 29
INFORMACIÓN TÉCNICA
Fácil Mantenimiento
Consta solamente de siete partes ensambladas sin sujetadores inferiores o juntas de ninguna clase. Todas estas partes son com-
pletamente flotantes, no existiendo carga sobre el pasador, el cual a su vez, es completamente flotante. El nuevo diseño, en el cual
se eliminaron los barrenos por los cuales tenían acomodos los pasadores, permite tener hermeticidad total en la válvula, ya que los
pasadores van sobre un soporte el cual va fijado dentro de la válvula sin necesidad de barrenarla.
Las válvulas DUAL PLATE, siendo mucho más livianas que las válvulas de retención convencionales son, sin embargo, más fuertes.
Al dividir en dos la apertura, el espesor de los platos se reduce al grado de requerir solamente la octava parte del peso de una
lenteja convencional, para soportar una presión equivalente.
El cuerpo angosto y compacto es en sí mismo más fuerte y más rígido que un tramo corto de tubería de pared gruesa.
Un simple resorte de acero inoxidable o resistente al calor, efectúa el asiento en forma positiva. Esta rápida y efectiva acción de
cierre por medio del resorte es posible dado el poco peso de los platos.
El resorte está especialmente diseñado para cada válvula y el bajo esfuerzo a que se somete, le dan gran resistencia a la fatiga. La
rápida acción del resorte cierra la válvula antes de que el retorno del flujo pueda ocurrir disminuyendo así el perjudicial golpe de ariete.
Coeficientes
Coeficiente de Coeficiente del flujo del agua de la válvula totalmente Dirección de flujo
Tamaño Nominal del Tubo resistencia del abierta bajo temperatura nominal Vertical Horizontal
líquido
de la válvula
Aproximación de la Presión de
DN NPS totalmente Kv(m³/h) Cv(U.S) Cv(U.K)
Apertura (Kpa)
abierta
50 2 2.6 63 74 62 2 1
65 2 1/2 2.4 109 128 107 2 1
80 3 2.3 172 201 169 2 1
100 4 2 289 338 283 2 1
125 5 1.8 476 557 466 2 1
150 6 1.5 750 878 735 2 1
200 8 1.3 1432 1675 1403 2 1
250 10 1.2 2330 2726 2283 2 1
300 12 1 3676 4301 3602 2 1
350 14 0.9 5274 6171 5169 2 1
400 16 0.8 7306 8548 7160 3 1
450 18 0.8 9246 10818 9061 3 1
500 20 0.8 11415 13356 11187 3 1
600 24 0.7 17573 20560 17222 3 1
700 28 0.7 23919 27985 23441 4 1
750 30 0.7 27458 32126 26909 4 1
800 32 0.7 31241 36552 30616 4 1
900 36 0.7 39539 46261 37848 4 1
1000 40 0.7 48814 57112 47838 4 1
1050 42 0.7 53817 62966 52741 4 1
1100 44 0.7 ---- ---- ---- 4 1
1200 48 0.7 70292 82242 68886 4 1
1350 54 0.7 ---- ---- ---- 4 1
1400 56 0.7 ---- ---- ---- 4 1
1500 60 0.7 ---- ---- ---- 4 1
30 www.walworth.com
INFORMACIÓN TÉCNICA
Línea de producción de Válvula Check Disco-Doble Tipo Wafer
Medida Presión (CLASE)
DN NPS 150 300 600 900 1500 2500
50 2 • • • • • •
65 2 1/2 • • • • • •
80 3 • • • • • •
100 4 • • • • • •
125 5 • • • • • •
150 6 • • • • • •
200 8 • • • • • •
250 10 • • • • • •
300 12 • • • • • •
350 14 • • • • •
400 16 • • • • •
450 18 • • • •
500 20 • • • •
600 24 • • • •
650 26 • • •
700 28 • • •
750 30 • • •
800 32 • • •
900 36 • • •
1000 40 • •
1050 42 • •
1100 44 • •
1200 48 • •
1350 54 • •
1400 56 • •
1500 60 • •
RELACIÓN PRESIÓN-TEMPERATURA
ACERO AL CARBÓN ASTM A216 GRADO WCB
(*) Para extremos soldables a tope únicamente. La relación para extremos bridados termina a 1000°F (538°C).
www.walworth.com 31
RELACIÓN PRESIÓN-TEMPERATURA
ACERO AL CARBÓN ASTM A217 GRADO WC6
MÁXIMA PRESIÓN DE TRABAJO PERMISIBLE EN PSIG POR CLASE
°F Temperatura °C
150 300 600 900 1,500 2500
-20 a 100 -29 a 38 290 750 1,500 2,250 3,750 6,250
200 93 260 750 1,500 2,250 3,750 6,250
300 149 230 720 1,445 2,165 3,610 6,015
400 204 200 695 1,385 2,080 3,465 5,775
500 260 170 665 1,330 1,995 3,325 5,540
600 316 140 605 1,210 1,815 3,025 5,040
650 343 125 590 1,175 1,765 2,940 4,905
700 371 110 570 1,135 1,705 2,840 4,730
750 399 95 530 1,065 1,595 2,660 4,430
800 427 80 510 1,015 1,525 2,540 4,230
850 454 65 485 975 1,460 2,435 4,060
900 482 50 450 900 1,350 2,245 3,745
950 510 35 320 640 955 1,595 2,655
1,000 538 20 215 430 650 1,080 1,800
1,050 566 20(a) 145 290 430 720 1,200
1,100 593 20(a) 95 190 290 480 800
1,150 621 20(a) 65 130 195 325 545
1,200 649 15(a) 40 80 125 205 345
(a) La relación para extremos bridados termina a 1000°F (538°C).
32 www.walworth.com
RELACIÓN PRESIÓN-TEMPERATURA
ACERO AL CARBÓN ASTM A351 GRADO CF8
MÁXIMA PRESIÓN DE TRABAJO PERMISIBLE EN PSIG POR CLASE
°F Temperatura °C
150 300 600 900 1,500 2,500
-20 a 100 -29 a 38 275 720 1,440 2,160 3,600 6,000
200 93 230 600 1,200 1,800 3,000 5,000
300 149 205 540 1,075 1,615 2,690 4,480
400 204 190 495 995 1,490 2,485 4,140
500 260 170 465 930 1,395 2,330 3,880
600 316 140 440 885 1,325 2,210 3,680
650 343 125 430 865 1,295 2,160 3,600
700 371 110 420 845 1,265 2,110 3,520
750 399 95 415 825 1,240 2,065 3,440
800 427 80 405 810 1,215 2,030 3,380
850 454 65 395 790 1,190 1,980 3,300
900 482 50 390 780 1,165 1,945 3,240
950 510 35 380 765 1,145 1,910 3,180
1,000 538 20 355 710 1,065 1,770 2,950
1,050 566 20(a) 325 650 975 1,630 2,715
1,100 593 20(a) 255 515 770 1,285 2,145
1,150 621 20(a) 205 410 615 1,030 1,715
1,200 649 20(a) 165 330 495 825 1,370
1,250 677 20(a) 135 265 400 970 1,115
1,300 704 20(a) 115 225 340 565 945
1,350 732 20(a) 95 185 280 465 770
1,400 760 20(a) 75 150 225 380 630
1,450 788 20(a) 60 115 175 290 485
1,500 816 15(a) 40 85 125 205 345
(*) Para extremos soldables a tope únicamente. La relación para extremos bridados termina a 1000°F (538°C).
(*) Para extremos soldables a tope únicamente. La relación para extremos bridados termina a 1000°F (538°C).
www.walworth.com 33
VÁLVULA TIPO WAFER DUAL PLATE
CAÍDA DE PRESIÓN O PÉRDIDA DE CARGA A TRAVÉS DE LA VÁLVULA A UNA
VELOCIDAD DE FLUJO DE 3.048 M/SEG (10 PIES/SEG) DE AGUA A 155°C (60°F)
Tamaño de la válvula Gasto Pérdida de presión Pérdida de carga Equivalencia tubería C-100 P
* Esta tabla es válida para válvulas API como para válvulas ANSI
34 www.walworth.com
VÁLVULA TIPO WAFER DUAL PLATE
GRÁFICA DE CAÍDA DE PRESIÓN O PÉRDIDA DE CARGA
63.5 mm (2 1/2”)
76.2 mm (3”)
GALONES POR SEGUNDO
LITROS POR SEGUNDO
101.6 mm (4”)
127.0 mm (5”)
152.4 mm (6”)
203.2 mm (8”)
254.0 mm (10”)
304.8 mm (12”)
355.6 mm (14”)
406.4 mm (16”)
457.2 mm (18”)
508.0 mm (20”)
609.6 mm (24”)
762 mm (30”)
914.4 mm (36”)
1219.2 mm (48”)
* Esta tabla es válida para válvulas API como para válvulas ANSI
www.walworth.com 35
BASES DE DISEÑO
Todas las válvulas WALWORTH son diseñadas donde sea aplicable, siguiendo una o más de los siguientes estándares.
API Instituto Americano del Petróleo:
API 594 Válvulas Check: Bridadas, Lug, Wafer y Soldable a Tope.
API 598 Inspección y Prueba de Válvulas.
36 www.walworth.com
CÓMO ORDENAR
La figura del ejemplo 24” H 6SPF describe una válvula tipo Wafer de 24” de diámetro nominal, estilo H (diseño estándar),
clase ANSI 600#, con cuerpo de acero al carbón (WCB), con sello metal a metal, extremos cara ranurada. W1 describe
las placas hechas de Ac. Inox. Gr. CF8, pernos de Ac. Inox. Gr. F6, perno tope de Ac. Inox. Gr. 316.
24” H 6 S P F W1
NO. DE INTERIORES
EXTREMOS
ASIENTO DEL CUERPO
CUERPO
CLASE
MODELO
MEDIDA
Figura Base
Modelo Clase Cuerpo Asiento cuerpo Extremos
B Bronce-Al
D Brida Doble 1 150 E EPDM F Cara Ranurada
C CF8M/SS316
D CF8/SS304
Wafer Diseño
H 3 300 M Buna-N R Junta Tipo Anillo
Estandar
G LCB
I CF3/SS304L
Cara Plana (sin
L Lug 6 600 P Sello Metal-Metal P
ranurado)
J LC3
K CF3M/SS316L
9 900 V Vitón
M Monel
N CD3MN
5 1500 N Neopreno
S WCB
2 2500
www.walworth.com 37
TÉRMINOS Y CONDICIONES GENERALES
CONFIRMACIÓN DE PEDIDO: Todas las cotizaciones son aceptadas dentro de los algunos de los contratos incompletos o puede diferir las entregas o embarques que
primeros treinta días después a la fecha de cotización , a menos que se haya dado estén asignados a dichos contratos hasta que se haya cubierto satisfactoriamente
una extensión de la oferta por escrito. En el caso de que una orden de compra sea los pagos pendientes. Todos los embarques y entregas son estimados a la posible
recibida después de este periodo, WALWORTH se reserva el derecho de re-cotizar fecha de entrega, WALWORTH hará el mejor esfuerzo para entregar dentro del
la oferta. Todas las órdenes de compra y los contratos están sujetos a la aprobación tiempo establecido, pero sin garantizar que así será. WALWORTH inicia la progra-
del crédito por parte de WALWORTH. mación de entrega cuando recibe la autorización del Cliente de proceder con la
orden, sujeto a las previsiones de la siguiente cláusula. La orden no será liberada
FLETES.- Cuando los precios ofertados se basan en la entrega FOB punto de para fabricación hasta que se hayan recibido en Planta todas las especificaciones
embarque sin flete pagado, WALWORTH intentará realizar los embarques por la vía y los dibujos para aprobación (cuando sean requeridos dibujos para aprobación);
que resulte en el costo más bajo a menos que el comprador indique instrucciones entonces la programación de entrega comienza con esta fecha. WALWORTH no
diferentes. Todos los embarques serán con flete por cobrar a menos que se estipule será responsable directa o indirectamente por daños consecuenciales o pérdidas
otra cosa en la orden de compra, en cuyo caso WALWORTH facturará los costos de causadas por retrasos en la entrega, sin importar la naturaleza del retraso.
transportación al comprador. La entrega a una línea de transportes será conside-
rada como una entrega al comprador por lo que la carga será responsabilidad del Sin limitar la generalidad de lo anterior, WALWORTH no asuma responsabilidad por
mismo a partir de este punto. Reclamaciones por perdida o daño de los materiales retrasos en la entrega resultantes de incendios, inundaciones, accidentes, tumultos,
o productos durante el transito deberá ser tramitada directamente por el comprador huelgas, retrasos durante el transporte, falte de materiales o mano de obra, leyes
con la línea de transportes. actuales o futuras, actos de cualquier autoridad de gobierno, o cualquier otra causa
fuera del control del vendedor. Productos ofrecidos de stock están disponibles
PRECIOS.- A todos los precios cotizados se aumentaran los impuestos por los que salvo previa venta.
la mercancía deba pagar al momento de la venta. El vendedor deberá establecer
dichos impuestos de acuerdo a las leyes federales, estatales o cualquier otra regu- INSPECCIÓN.- La inspección final y la aceptación de los productos deberá hacerse
lación del gobierno relacionada con los productos los cuales deberán ser menores en la Planta de fabricación, a menos que se especifique otra cosa en la orden de
que los precios de la orden de compra. compra previa aceptación de las partes. Los precios no incluyen cargos por pruebas
especiales o inspecciones ejecutadas a solicitud del comprador, a menos que se
TERMINOS DE ESCALACIÓN.- Los precios reflejados en las listas de precios se hayan incluido en la orden de compra y previo acuerdo entre WALWORTH y el Cliente.
basan en los costos al momento de su publicación. Estos precios permanecerán
firmes en aquellos productos cotizados por un tiempo de entrega de hasta 26 (veinte RETORNOS.- Deberá obtenerse permiso por escrito de WALWORTH así como una
y seis) semanas o menos. Sobre aquellos productos cuyo tiempo de entrega sea tarjeta de instrucciones para retornar productos. Un cargo mínimo del 25% será
mayor a 26 (veinte y seis) semanas, los bienes serán fabricados con base a los aplicado al valor de factura más el costo relacionado del flete tanto del embarque
precios establecidos en las listas de precios efectiva a partir de la fecha del embar- original como del embarque de retorno de los productos, así como el costo de
que de los productos. En ningún caso el precio a facturar será menor que el precio reacondicionamiento de los productos para su venta.
originalmente cotizado.
CERTIFICADO DE GARANTIA: WALWORTH, extiende la presente Garantía de sus
COMPONENTES COMPRADOS.- (Por ejemplo motores, operadores de engranes, productos, por un período de 12 meses en operación o 18 meses en almacenamiento,
etc.) Los precios son cotizados en base a los precios de nuestros proveedores al lo que curra primero a partir de la fecha de entrega del producto.
momento de la cotización. El precio de venta será actualizado de acuerdo a las
políticas de escalación de precios de dichos proveedores. WALWORTH, garantiza que sus productos son fabricados bajo los estándares
de calidad, de diseño y manufactura normativos y contractuales solicitados por
EMBARQUES DIFERIDOS.- Si por alguna razón el Cliente desea retrasar el (los) el cliente. En caso de que el comprador confirme expresamente y por escrito el
embarque (s) por más de 30 días después de la terminación de fabricación de los incumplimiento de dichos estándares, WALWORTH se obliga a reparar o reemplazar
productos, o decide poner en espera o si decide parar el proceso de fabricación en o expedir autorización por escrito para que el cliente u otros reemplacen o reparen
cualquier etapa de la misma, WALWORTH se reserva el derecho de considerar la sin costo alguno para el comprador a costos de fabricación de WALWORTH, de
orden de compra cancelada e invocar por los cargos por cancelación de acuerdo a aquellas partes probadas como defectuosas.
la política de cancelaciones abajo mencionada.
Esta Garantía será válida cuando la selección de materiales realizada por el cliente
CANCELACIONES.- Después de la aceptación de la orden de compra por parte para el diseño, arreglo de materiales (TRIM, Cuerpos, Extremos, Mecanismos de
de WALWORTH, las partidas u órdenes terminadas serán sujetas a cargos por Accionamiento, etc.), recubrimientos internos y/o externos, hayan sido los adecuados
cancelación de la siguiente manera: para el manejo del fluido en operación.
• Cinco (5 %) por ciento del precio de venta para productos de stock. Esta Garantía aplicará cuando se mantengan las condiciones de operación y servicio
• Diez (10 %) por ciento del precio de venta para productos de stock que excedan para las cuales fue solicitado el producto.
los niveles normales en inventario.
• Cinco (5 %) por ciento del precio de venta antes de la aprobación de dibujos Para hacer valida la Garantía, el usuario es responsable de realizar el correcto
para productos fabricados específicamente para dicha orden de compra. mantenimiento en tiempo y forma, de acuerdo a lo establecido en el manual de
• Quince (15 %) por ciento del precio de venta después de la emisión de dibujos operación y mantenimiento correspondiente. WALWORTH, se reserva el derecho
para aprobación, pero antes del inicio de fabricación de materias primas. de solicitar los registros (evidencias) que confirmen el adecuado mantenimiento.
• Treinta a cincuenta (30 a 50 %) del precio de venta durante las etapas de Las obligaciones de WALWORTH se limitan y serán liberadas de toda responsabili-
fabricación de materias primas, dependiendo del grado de avance de las dad, en caso de que los productos sufran alteraciones, reparaciones o reemplazos
mismas. sin el expreso consentimiento por escrito de WALWORTH.
• Cincuenta y cinco a setenta y cinco (55 a 75 %) por ciento del precio de venta
durante los procesos de maquinado y soldadura, dependiendo del grado de Excepto a lo establecido en este documento, WALWORTH® renuncia y excluye
avance para la terminación del producto. todas las demás garantías expresas o implícitas por perdida, daño directo, indirecto,
• Cien (100 %) por ciento después del ensamble y pruebas. incidental o consecuentes de otros productos, procesos, instalaciones o equipos del
PAGOS.- Los envíos de pago deberán hacerse a la dirección indicada en la factura. comprador o del usuario final, ya sea parcial o total debidos a defectos de materiales
y/o trabajo y/o el diseño del producto WALWORTH.
TÉRMINOS DE CRÉDITO.- Los términos serán los acordados en la cotización.
Facturas debido a pagos retrasados tendrán un cargo adicional del 1.5 % mensual CARGO MÍNIMO.- Órdenes de compra por un valor menor a $ 100.00 usd neto
sobre los pagos pendientes. tendrán un cargos del 100 %. Partes para reparación tendrán un cargo mínimo de
$ 50.00 usd.
ENTREGA.- Los embarques y las entregas serán siempre sujetos a la aprobación
del Departamento de Crédito de WALWORTH. Si el comprador falla en los pagos NOTA: WALWORTH se reserva el derecho de corregir errores obvios administrativos
oportunos de acuerdo con los términos del contrato. WALWORTH puede adicio- en cotizaciones, facturas, así como en otros contratos.
nalmente y sin limitaciones a sus otros derechos y prerrogativas, cancelar todos o
38 www.walworth.com
www.walworth.com
MÉXICO
Pressure rating:
3000 WOG
Sizes: NPS ½ – 3
(DN 15 – 80)
Full compliance
to: ASME B16.34
Fire-tested to:
API 607
Rev. 5 /
ISO 10497
Velan’s profile
Velan AT A GLANCE
History
Table of contents
•• Founded in 1950
Company profile.............................................................................................................................. 2
Sales Global network................................................................................................................................ 3
•• Over $500 million
HP series overview........................................................................................................................ 4
People HP series design features............................................................................................................ 5
•• Over 2,000 employees
HP-3000 regular and full port technical data............................................................................ 6
Product line How to order HP-3000 valves....................................................................................................... 7
A world-leading range of valves across
all major industrial applications:
•• Cast steel gate, globe, check,
and ball valves
Velan is one of the world’s leading Founded in 1950, Velan has earned a
•• Forged steel gate, globe, check,
manufacturers of cast and forged steel reputation for product excellence and
and ball valves gate, globe, check, ball, triple-offset, knife innovation by bringing to the market
•• Triple-offset butterfly valves gate, highly engineered severe service superior products with special emphasis on
•• Knife gate valves valves, and steam traps offering superior quality, safety, ease of operation, and long
performance across all major industrial service life. Velan valves have an extremely
•• Severe service valves applications including: broad installation base and are approved by
•• Bellows seal valves • fossil, nuclear, and cogeneration power; major companies worldwide.
•• Steam traps • oil and gas;
• refining and petrochemicals; Velan concentrates on one business—the
• chemicals and pharmaceutical; design, manufacture and marketing of steel
Quality • LNG and cryogenics; valves and steam traps in a broad range
All major certifications and approvals • marine; of types and sizes for high performance
•• ASME N stamp and NPT for nuclear • subsea; service in a wide range of applications.
valves (since 1970) • HVAC; The company’s talented people are focused
• mining; on Velan’s core values of quality, reliability,
•• ISO 9001 (since 1991)
• water and wastewater; and innovation, and integrity and mission to be
Currently certified to ISO 9001:2008
• pulp and paper. the world’s leading valve brand.
•• PED
•• GOST (TR and RTN) The company also supplies actuators and
integrated control packages to suit our
•• API 6A and API 6D
customer’s needs.
•• TA-Luft
•• Quality programs fully compliant with
ISO-9001, NCA 4000, ASME NQA-1 and
10 CFR 50 Appendix B, surveyed by
ASME and audited by NUPIC, Northrop
Grumman Newport News, DCMA,
utilities, architect/ engineers, and other
organizations from around the world NOTE: The material in this catalog is for general information only and shall not be used
for specific performance data and material selection without first consulting Velan.
Velan reserves the right to change designs, materials or specifications without notice.
Headquartered in Montreal, Velan has
Velan does not accept any liability or damages arising from the use of information in
several international subsidiaries. this catalog.
For general inquiries:
Velan head office:
7007 Côte de Liesse,
Montreal, QC H4T 1G2 Canada
© 2014 Velan Inc., Montreal, QC, Canada. All rights reserved. The contents hereof are confidential and proprietary to Velan.
Tel: +1 514 748 7743 Any unauthorized reproduction or disclosure, in whole or in part, is strictly prohibited. The material in this catalog is for general
Fax: +1 514 748 8635 information only and shall not be used for specific performance data and material selection without first consulting Velan. Velan
reserves the right to change this information without notice. Velan does not accept any liability or damages arising from the use
of information in this catalog. Velan Valves, Velan, Memoryseal, Securaseal, Torqseal, Velflex, Adaxie, and RAMA are trademarks
Check our website for more or registered trademarks of Velan Inc. and/or another Velan company. Stellite® is a registered trademark of Kennametal
specific contact information. Stellite™, a wholly owned subsidiary of Kennametal Inc. All other trademarks and registered trademarks are owned by their
respective companies.
www.velan.com
2 Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved.
Velan’s global network
Head office
Montreal, Canada Lyon, France Ansan City, South Korea Granby, Canada
Velan Inc., Plant 1 Velan S.A.S. Velan Ltd., Plant 1 VelCAN
Montreal, Canada Mennecy, France Ansan City, South Korea Benicia, CA, U.S.A.
Velan Inc., Plant 2 and 7 Segault S.A. Velan Ltd., Plant 2 VelCAL
Granby, Canada Leicester, UK Ansan City, South Korea Marietta, GA, U.S.A.
Velan Inc., Plant 4 and 6 Velan Valves Ltd. Velan Ltd., Plant 3 VelEAST
3 Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved.
Hp series oVerView
Velan HIGH PRessURe foRGeD sTeel ReGUlaR anD fUll PoRT ball ValVe
THReaDeD, socKeT WelD, anD flanGeD enDs, 3000 WoG
regular Port: nPS ¾ – 3 (dn 20 –80) , Full Port: nPS ½ – 2 (dn 15 – 50)
Velan’s HP series forged 3-piece valve is a high pressure ball valve designed for the tough and rugged
rugged standards of the oilfield market in a 3000 PSI body configuration. This resilient seated valve has
superior sealing characteristics in the seat, stem and body seals.
4 Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved.
HP series Design Features
Graphite packing
Graphite packing used to
pass fire test to API 607 Standard
large robust
locking Handle
Secondary
metal-to-metal PEEK thrust washer
seal prevents deformation under high
pressure conditions
Different end
connections FULL COMPLIANCE TO
ASME B16.34
Available in socket weld,
threaded, and flanged
end connections.
BLOW-OUT PROOF STEM
3-PIECE CONSTRUCTION
Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved. 5
HP-3000 REGULAR and Full PORT
technical DATA
STANDARD materials
A
Part Carbon Low Stainless
Steel Temp Steel
Body A105 LF2 F316
Body end cap A105 LF2 F316 B
Stem SS 630
Ball SS 630 ØE
Thrust washer PEEK
Seat POM(1)
Packing rings Die-formed flexible graphite C
250
3500
1000
20 178 105 54 108 171 191 229 229 19.1 44 2
50 1 8.50 4.88 2.75 5.50 7.50 8.50 10.00 10.00 0.94 1-111⁄2 100 8.8
500 25 216 124 70 140 191 216 254 254 23.9 85 4
0 0
11⁄2 10.50 5.98 3.13 6.25 8.54 9.50 12.00 12.00 1.5 1-111⁄2 275 16.1
0 100 200 300 400 500 600 700
40 267 152 80 159 217 241 305 305 38.1 234 7.3
Temperature (°F) 2 12.00 7.11 3.13 6.25 12.75 11.50 14.50 14.50 2.0 2-111⁄2 510 27
50 305 181 80 159 324 292 368 368 50.8 434 12
Note: For HP-3000 NPS ¾ - 3 (20 - 80) regular port and NPS ½ - 2 (DN 15-50) Note: The indicated weights for both regular and full port apply to NPT
full port. valves only.
6 Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved.
How to orDer
Velan HP seRIes foRGeD ball ValVes
the figure numbers shown on this key cover essential features of velan HP series valves.
Please use these figure numbers to ensure prompt and accurate processing of your order.
a b c d e F g H i
– –
S 0 5 v 1 7 0 2 r r l Z
Example: NPS 1 (DN 25), threaded, HP-3000, full port valve in carbon steel body with SS630 ball and stem, POM seats and fire-tested to API-607.
eXaMPles: g triM
S05-V1702-RRLZ (valve size is part of figure number) coDe ball sTeM
1 S-V1702RRLZ (valve size is shown separately) RR SS 630 SS 630
03 - 1
⁄2 (15) 05 - 1 (25) 08 - 2 (50) H Seat Material
04 - 3
⁄4 (20) 07 - 11⁄2 (40) 10 - 3 (80)
l - POM (Delrin®)
7 Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved.
The most comprehensive line of industrial forged and cast steel
gate, globe, check, ball, butterfly, and knife gate valves and steam traps.
Headquartered in Montreal, Canada, Velan has several © 2014 Velan Inc., Montreal, QC, Canada. All rights reserved. The contents hereof are confidential and
proprietary to Velan. Any unauthorized reproduction or disclosure, in whole or in part, is strictly prohibited.
international subsidiaries. For general inquiries: The material in this catalog is for general information only and shall not be used for specific performance data and
material selection without first consulting Velan. Velan reserves the right to change this information without notice.
Velan head office Velan does not accept any liability or damages arising from the use of information in this catalog. Velan Valves, Velan,
7007 Côte de Liesse, Montreal, QC H4T 1G2 Canada Memoryseal, Torqseal, Velflex, Adaxie, and RAMA are trademarks or registered trademarks of Velan Inc. and/or another
Velan company. Stellite® is a registered trademark of Kennametal Stellite™, a wholly owned subsidiary of Kennametal
Tel: +1 514 748 7743 Fax: +1 514 748 8635 Inc. All other trademarks and registered trademarks are owned by their respective companies.
Printed in Canada
Valvac
General purpose ball valves
Sales VOP-1000
one-piece reduced port ........................... 4
• Over $500 million
VEE-2000
People full and regular port end-entry............... 5
• Over 2,000 employees V3P-1000
three-piece full port ................................. 6
Product line
How to order................................................ 7
A world-leading range of valves across
all major industrial applications:
• Cast steel gate, globe, check,
and ball valves Velan is one of the world’s leading
• Forged steel gate, globe, check, manufacturers of cast and forged steel The Velan Valvac line is a
and ball valves gate, globe, check, ball, triple-offset, knife contractor-grade ball valve
gate, highly engineered severe service intended for general services
• Triple-offset butterfly valves valves, and steam traps offering superior such as utilities and WOG rated
• Knife gate valves performance across all major industrial
requirements. Should you
• severe service valves applications including: fossil, nuclear,
and cogeneration power; oil and gas; have requirements for process
• Bellows seal valves refining and petrochemicals; chemicals applications please refer to our
• steam traps and pharmaceutical; LNG and cryogenics; Memoryseal® catalog.
marine; HVAC; mining; water and
Quality wastewater; pulp and paper; and subsea. Our Memoryseal® design is
All major certifications and approvals The company also supplies actuators and ideally suited for process
integrated control packages. applications due to superior
• AsME N stamp and NPT for nuclear features such as E20 packing
valves (since 1970) Founded in 1950, Velan has earned a chambers, fire test to API 607/
• IsO 9001 (since 1991) reputation for product excellence and ISO 10497, pre-drilled mounting
Currently certified to IsO 9001:2008 innovation by bringing to the market superior pads for actuation, and our
products with special emphasis on quality, patented Memoryseal® flexible
• PED
safety, ease of operation, and long service
• GOsT (TR and RTN) seats.
life. Velan valves have an extremely broad
• API 6A and API 6D installation base and are approved by major
companies worldwide.
• TA-Luft
• Quality programs fully compliant with
IsO-9001, NCA 4000, AsME NQA-1 and
10 CFR 50 Appendix B, surveyed by
AsME and audited by NUPIC, Northrop
Grumman Newport News, DCMA,
utilities, architect/ engineers, and other
organizations from around the world
2 Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved.
Velan’s gLObal Network
Head office
Montreal, Canada Lyon, France Ansan City, South Korea Granby, Canada
Velan Inc., Plant 1 Velan S.A.S. Velan Ltd., Plant 1 VelCAN
Montreal, Canada Mennecy, France Ansan City, South Korea Benicia, CA, U.S.A.
Velan Inc., Plant 2 and 7 Segault S.A. Velan Ltd., Plant 2 VelCAL
Granby, Canada Leicester, UK Ansan City, South Korea Marietta, GA, U.S.A.
Velan Inc., Plant 4 and 6 Velan Valves Ltd. Velan Ltd., Plant 3 VelEAST
Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved. 3
Velan valvac VOP-1000
ONE-PIECE REDUCED PORT GENERAL PURPOSE BALL VALVE
NPS ¼ – 2 (DN 8 – 50)
CARBON OR STAINLESS STEEL BODY, RPTFE SEATS
Figure number
Carbon s-L0302-SSGA
CF8M s-L0313-SSGA
PRESSURE - BAR
PRESSURE - PSI
32 120 90 78 20 33 0.67
E
11⁄2 5.97 3.88 3.37 0.98 2.00
40 152 99 86 25 45 0.91
2 5.97 4.29 4.02 1.26 3.31
50 152 109 102 32 58 1.50
D
4 Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved.
VeLan Valvac VEE-2000
FULL AND REGULAR PORT END-ENTRY GENERAL PURPOSE BALL VALVE
NPS ¼ – 2 (DN 8 – 50)
CARBON OR STAINLESS STEEL BODY, RPTFE SEATS
Full port
Figure number
Carbon s-M1102-SSGA
CF8M s-M1113-SSGA
Regular port
Figure number
Carbon s-M0102-SSGA
CF8M s-M0113-SSGA
PRESSURE - BAR
PRESSURE - PSI
(1) NPS ¼ and 3⁄8 (DN 8 and 10) sizes available only in SS body. 400 28
200 14
0
DIMENSIONS AND WEIGHTS 0 100 200 300 400 500°F
Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved. 5
Velan Valvac V3P-1000
THREE-PIECE FULL PORT GENERAL PURPOSE BALL VALVE
NPS ¼ – 2 (DN 8 – 50)
CARBON OR STAINLESS STEEL BODY, RPTFE SEATS, threaded or weld ends
Figure number(1)
Carbon S-K1802-SSGA
CF8M S-K1813-SSGA
STANDARD MATERIALS
PRESSURE TEMPERATURE RATING (WCB)
PART Stainless steel CARBON steel V3P-1000 NPS ¼–2 (DN 8–50), RPTFE seats, Full port
Body CF8M WCB 1000 69
End cap CF8M WCB
900 63
Seat RPTFE RPTFE
Ball SS 316 SS 316 800 56
Stem SS 316 SS 316
Stem packing RPTFE RPTFE 700 49
Thrust washer RPTFE RPTFE
PRESSURE - BAR
PRESSURE - PSI
600 42
Body Seal PTFE PTFE
Body nuts & bolts SS 304 B7 500 35
Packing nut SS 304 SS 304
Handle nut SS 304 SS 304 400 28
Handle / latch SS 304 SS 304
300 21
Packing washer SS 304 SS 304
200 14
DIMENSIONS AND WEIGHTS
100 7
SIZE V3P-1000 MANUAL WEIGHT
NPS
Cv
A B D E lb/kg
DN 0 100 200 300 400 500°F
1
⁄4 4.22 2.28 2.50 0.42 8 0.99 0 50 100 150 200 250°C
8 107 58 64 11 0.45 TEMPERATURE
3
⁄8 4.22 2.28 2.50 0.50 10 0.99
10 107 58 64 13 0.45
1
⁄2 5.03 2.50 2.90 0.55 1.46 A
13
15 128 64 74 14 0.66
3
⁄4 5.03 2.67 3.23 0.80
50 1.98
20 128 68 82 20 0.90
1 5.68 3.33 3.58 1.00 93 3.09 B
25 144 85 91 25 1.40
11⁄4 5.68 3.55 4.37 1.25 170 4.85
32 144 90 111 32 2.20 E
11⁄2 8.22 3.88 4.84 1.50 250 6.84
40 209 99 123 38 3.10
2 8.22 4.29 4.71 2.00 450 10.14
50 209 109 120 51 4.60 D
6 Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved.
Velan Valvac general purpose ball valves
The figure numbers shown on this key cover essential features of Velan Valvac valves.
Please use these figure numbers to ensure prompt and accurate processing of your order.
Type of connection Size of connection Model number/Class Port Type Body material Trim Seat material Special service
A B C D E F G H I
— —
S 0 5 — L 0 3 0 2 — S S G A
Example: NPS 1 (DN 25), threaded, VOP-1000, regular port valve in carbon steel with
stainless steel trim, and glass-reinforced PTFE seat for standard service.
A TYPE OF CONNECTION D PORT
B Butt weld 0 Regular port 1 Full port
S Thread NPT
SS 316 316
04 3/4 (20) 08 2 (50)
K V3P-1000 0 150
Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved. 7
The most comprehensive line of industrial forged and cast steel
gate, globe, check, ball, butterfly, and knife gate valves and steam traps.
WARNING: The use of chainwheels may present a risk of serious injury to personnel or
damage to property if the chainwheel becomes detached and falls. The end
user and purchaser shall be responsible to ensure the correct installation, operation, maintenance
and safety provisions related to chainwheels. Velan does not assume any liability whatsoever for the
safe application and operation of chainwheels supplied by parties other than Velan or for chainwheels
Headquartered in Montreal, Canada, Velan has several that are used without a suitably designed safety device.
international subsidiaries. For general inquiries:
© 2019 Velan Inc., Montreal, QC, Canada. All rights reserved. The contents hereof are confidential and proprietary to Velan. Any
Velan head office unauthorized reproduction or disclosure, in whole or in part, is strictly prohibited. The material in this catalog is for general information
only and shall not be used for specific performance data and material selection without first consulting Velan. Velan reserves the
7007 Côte de Liesse, Montreal, QC H4T 1G2 Canada right to change this information without notice. Velan does not accept any liability or damages arising from the use of information in
Tel: +1 514 748 7743 Fax: +1 514 748 8635 this catalog. Velan, Velan Ultraflex, Steamless, Moss, Torqseal, Memoryseal, Securaseal, Velflex, Rama, Clama, Adareg, and Rama
Clama II are trademarks or registered trademarks of Velan Inc. and/or another Velan company. One or more of these trademarks are
registered in certain countries/regions, please contact Velan Inc.’s legal department for further information. All other trademarks and
Check our website for more specific contact information. registered trademarks are owned by their respective companies.
www.velan.com
CAT-GPBV-07-14a
Printed in Canada
Valvac
General purpose ball valves
Sales VOP-1000
one-piece reduced port ........................... 4
• Over $500 million
VEE-2000
People full and regular port end-entry............... 5
• Over 2,000 employees V3P-1000
three-piece full port ................................. 6
Product line
How to order................................................ 7
A world-leading range of valves across
all major industrial applications:
• Cast steel gate, globe, check,
and ball valves Velan is one of the world’s leading
• Forged steel gate, globe, check, manufacturers of cast and forged steel The Velan Valvac line is a
and ball valves gate, globe, check, ball, triple-offset, knife contractor-grade ball valve
gate, highly engineered severe service intended for general services
• Triple-offset butterfly valves valves, and steam traps offering superior such as utilities and WOG rated
• Knife gate valves performance across all major industrial
requirements. Should you
• severe service valves applications including: fossil, nuclear,
and cogeneration power; oil and gas; have requirements for process
• Bellows seal valves refining and petrochemicals; chemicals applications please refer to our
• steam traps and pharmaceutical; LNG and cryogenics; Memoryseal® catalog.
marine; HVAC; mining; water and
Quality wastewater; pulp and paper; and subsea. Our Memoryseal® design is
All major certifications and approvals The company also supplies actuators and ideally suited for process
integrated control packages. applications due to superior
• AsME N stamp and NPT for nuclear features such as E20 packing
valves (since 1970) Founded in 1950, Velan has earned a chambers, fire test to API 607/
• IsO 9001 (since 1991) reputation for product excellence and ISO 10497, pre-drilled mounting
Currently certified to IsO 9001:2008 innovation by bringing to the market superior pads for actuation, and our
products with special emphasis on quality, patented Memoryseal® flexible
• PED
safety, ease of operation, and long service
• GOsT (TR and RTN) seats.
life. Velan valves have an extremely broad
• API 6A and API 6D installation base and are approved by major
companies worldwide.
• TA-Luft
• Quality programs fully compliant with
IsO-9001, NCA 4000, AsME NQA-1 and
10 CFR 50 Appendix B, surveyed by
AsME and audited by NUPIC, Northrop
Grumman Newport News, DCMA,
utilities, architect/ engineers, and other
organizations from around the world
2 Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved.
Velan’s gLObal Network
Head office
Montreal, Canada Lyon, France Ansan City, South Korea Granby, Canada
Velan Inc., Plant 1 Velan S.A.S. Velan Ltd., Plant 1 VelCAN
Montreal, Canada Mennecy, France Ansan City, South Korea Benicia, CA, U.S.A.
Velan Inc., Plant 2 and 7 Segault S.A. Velan Ltd., Plant 2 VelCAL
Granby, Canada Leicester, UK Ansan City, South Korea Marietta, GA, U.S.A.
Velan Inc., Plant 4 and 6 Velan Valves Ltd. Velan Ltd., Plant 3 VelEAST
Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved. 3
Velan valvac VOP-1000
ONE-PIECE REDUCED PORT GENERAL PURPOSE BALL VALVE
NPS ¼ – 2 (DN 8 – 50)
CARBON OR STAINLESS STEEL BODY, RPTFE SEATS
Figure number
Carbon s-L0302-SSGA
CF8M s-L0313-SSGA
PRESSURE - BAR
PRESSURE - PSI
32 120 90 78 20 33 0.67
E
11⁄2 5.97 3.88 3.37 0.98 2.00
40 152 99 86 25 45 0.91
2 5.97 4.29 4.02 1.26 3.31
50 152 109 102 32 58 1.50
D
4 Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved.
VeLan Valvac VEE-2000
FULL AND REGULAR PORT END-ENTRY GENERAL PURPOSE BALL VALVE
NPS ¼ – 2 (DN 8 – 50)
CARBON OR STAINLESS STEEL BODY, RPTFE SEATS
Full port
Figure number
Carbon s-M1102-SSGA
CF8M s-M1113-SSGA
Regular port
Figure number
Carbon s-M0102-SSGA
CF8M s-M0113-SSGA
PRESSURE - BAR
PRESSURE - PSI
(1) NPS ¼ and 3⁄8 (DN 8 and 10) sizes available only in SS body. 400 28
200 14
0
DIMENSIONS AND WEIGHTS 0 100 200 300 400 500°F
Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved. 5
Velan Valvac V3P-1000
THREE-PIECE FULL PORT GENERAL PURPOSE BALL VALVE
NPS ¼ – 2 (DN 8 – 50)
CARBON OR STAINLESS STEEL BODY, RPTFE SEATS, threaded or weld ends
Figure number(1)
Carbon S-K1802-SSGA
CF8M S-K1813-SSGA
STANDARD MATERIALS
PRESSURE TEMPERATURE RATING (WCB)
PART Stainless steel CARBON steel V3P-1000 NPS ¼–2 (DN 8–50), RPTFE seats, Full port
Body CF8M WCB 1000 69
End cap CF8M WCB
900 63
Seat RPTFE RPTFE
Ball SS 316 SS 316 800 56
Stem SS 316 SS 316
Stem packing RPTFE RPTFE 700 49
Thrust washer RPTFE RPTFE
PRESSURE - BAR
PRESSURE - PSI
600 42
Body Seal PTFE PTFE
Body nuts & bolts SS 304 B7 500 35
Packing nut SS 304 SS 304
Handle nut SS 304 SS 304 400 28
Handle / latch SS 304 SS 304
300 21
Packing washer SS 304 SS 304
200 14
DIMENSIONS AND WEIGHTS
100 7
SIZE V3P-1000 MANUAL WEIGHT
NPS
Cv
A B D E lb/kg
DN 0 100 200 300 400 500°F
1
⁄4 4.22 2.28 2.50 0.42 8 0.99 0 50 100 150 200 250°C
8 107 58 64 11 0.45 TEMPERATURE
3
⁄8 4.22 2.28 2.50 0.50 10 0.99
10 107 58 64 13 0.45
1
⁄2 5.03 2.50 2.90 0.55 1.46 A
13
15 128 64 74 14 0.66
3
⁄4 5.03 2.67 3.23 0.80
50 1.98
20 128 68 82 20 0.90
1 5.68 3.33 3.58 1.00 93 3.09 B
25 144 85 91 25 1.40
11⁄4 5.68 3.55 4.37 1.25 170 4.85
32 144 90 111 32 2.20 E
11⁄2 8.22 3.88 4.84 1.50 250 6.84
40 209 99 123 38 3.10
2 8.22 4.29 4.71 2.00 450 10.14
50 209 109 120 51 4.60 D
6 Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved.
Velan Valvac general purpose ball valves
The figure numbers shown on this key cover essential features of Velan Valvac valves.
Please use these figure numbers to ensure prompt and accurate processing of your order.
Type of connection Size of connection Model number/Class Port Type Body material Trim Seat material Special service
A B C D E F G H I
— —
S 0 5 — L 0 3 0 2 — S S G A
Example: NPS 1 (DN 25), threaded, VOP-1000, regular port valve in carbon steel with
stainless steel trim, and glass-reinforced PTFE seat for standard service.
A TYPE OF CONNECTION D PORT
B Butt weld 0 Regular port 1 Full port
S Thread NPT
SS 316 316
04 3/4 (20) 08 2 (50)
K V3P-1000 0 150
Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved. 7
The most comprehensive line of industrial forged and cast steel
gate, globe, check, ball, butterfly, and knife gate valves and steam traps.
WARNING: The use of chainwheels may present a risk of serious injury to personnel or
damage to property if the chainwheel becomes detached and falls. The end
user and purchaser shall be responsible to ensure the correct installation, operation, maintenance
and safety provisions related to chainwheels. Velan does not assume any liability whatsoever for the
safe application and operation of chainwheels supplied by parties other than Velan or for chainwheels
Headquartered in Montreal, Canada, Velan has several that are used without a suitably designed safety device.
international subsidiaries. For general inquiries:
© 2019 Velan Inc., Montreal, QC, Canada. All rights reserved. The contents hereof are confidential and proprietary to Velan. Any
Velan head office unauthorized reproduction or disclosure, in whole or in part, is strictly prohibited. The material in this catalog is for general information
only and shall not be used for specific performance data and material selection without first consulting Velan. Velan reserves the
7007 Côte de Liesse, Montreal, QC H4T 1G2 Canada right to change this information without notice. Velan does not accept any liability or damages arising from the use of information in
Tel: +1 514 748 7743 Fax: +1 514 748 8635 this catalog. Velan, Velan Ultraflex, Steamless, Moss, Torqseal, Memoryseal, Securaseal, Velflex, Rama, Clama, Adareg, and Rama
Clama II are trademarks or registered trademarks of Velan Inc. and/or another Velan company. One or more of these trademarks are
registered in certain countries/regions, please contact Velan Inc.’s legal department for further information. All other trademarks and
Check our website for more specific contact information. registered trademarks are owned by their respective companies.
www.velan.com
CAT-GPBV-07-14a
Printed in Canada
Installation and operating manual
COMPACT MODULE SCREW COMPRESSOR
EVO1-NK, EVO2-NK, EVO3-NK/EVO3-NK-G,
EVO6-NK/EVO6-NK-G, EVO9-NK/EVO9-NK-G
No reproduction, adjustment, or translation is permitted beyond what is permitted by the copyright laws without
prior written approval.
The figures contained in this document are shown by way of example and can differ from the EVO-NK compact
module screw compressor.
The information contained in this document may be changed without prior notice.
Printed in Germany
Industriestraße 9
82110 Germering, Germany
Installation and operating manual – EVO-NK
The manufacturer reserves the right to carry out If you have questions, please contact
further technical developments without prior ROTORCOMP VERDICHTER GmbH.
notice.
Always specify the model and the complete serial 1.5.4 Standard delivery scope
number from the nameplate in all correspondence. With the EVO-NK, ROTORCOMP VERDICHTER
ROTORCOMP VERDICHTER GmbH assumes GmbH offers a completely equipped, compact
no liability whatsoever for damage or injuries module screw compressor.
which occur during handling, operation, mainte- The components of the standard delivery scope
nance work, or repairs due to failure to comply are described in the following chapters.
with the safety instructions or failure to exercise Optionally available components are marked with
the customary care and caution, even if this is not "Option".
expressly mentioned in this installation and oper-
ating manual. 1.6 Warranty information,
liability disclaimer
1.5.2 Intended use
ROTORCOMP VERDICHTER GmbH is a manu-
The compact module screw compressor EVO-NK
facturer of screw compressor components and not
is only used to compress atmospheric air.
of ready-to-operate compressor systems.
Use of the compressor module for compressing
gases and other media is only permissible with RC shall only be answerable for any defects of
written approval from ROTORCOMP these individual components for which it is respon-
VERDICHTER GmbH. sible within the scope of the warranty conditions.
The compressor module starting from the
Failure to comply with the following instructions
EVO3-NK size are available both with and without
and information shall void any and all liability. This
a transmission (G).
liability disclaimer also results in the loss of claims
The compressor module is designed for installa- for damages. This applies in particular in case of:
tion in a compressed air generating station (com-
– Unprofessional installation.
pressor system).
– Improper use.
Warning: – Operation of the compact module screw com-
pressor outside the specified limits (see chap-
If the compressor module is not used in accor- ter 9 "Technical Data and Tightening
dance with these regulations, there is no guaran- Torques").
tee of safe operation!.
– Failure to observe the safety precautions and
the usual care and caution.
1.5.3 Improper use – Unsuitable operating materials (gases, oils).
Under no circumstances is the compact module – Formation of condensation in the compressor
screw compressor EVO-NK to be module.
– installed in machines other than the screw com- – Corrosion as subsequent damage.
pressor system.
– Improper operation.
– installed in explosive environment.
– Insufficient maintenance, missing proof of
– operated outside the given limit values. maintenance.
– used to compress gases other than those listed – Use of unsuitable tools.
in chapter 1.5.2 "Intended use".
– Failure to use genuine spare parts.
– used with unsuitable operating materials
(gases, oils). – Unauthorized modifications to the compressor
module and/or its components.
– used to compress toxic, corrosive, explosive, or
noxious gases.
– to compress or transport fluids, powders, or
solids.
1.7 Nameplate
Installing the nameplate, see Figures 3-1 through
3-8.
5
4
3
2
1
1. Serial No.
2. Version
3. Model
4. Max. operating temperature in 110 °C/230 °F
5. Max. operating pressure in (g)/psi (g)
Note:
The transmission ratio (numbers of teeth) is
stamped on the transmission (see Figs. 3-4, 3-6
and 3-8).
Alternatively, a customer-specific nameplate can
be mounted on the compact module screw com-
pressor.
2.1 Identification of safety instructions This installation and operating manual contains
important instructions and information on the
Important instructions concerning hazards to per- transport, installation, commissioning, operation,
sons, technical safety and their operational safety maintenance, repair, disassembly, and storage
are especially highlighted in the following. that must be adhered to by the manufacturer and
They precede the measures to be taken and have by the owner of the screw compressor system.
the following meanings: As a result, it is absolutely mandatory to turn over
the entire documentation to the specially trained
personnel of the operator and to make it available
Warning: at the operating location prior to installation and
Indicates working and operating processes which commissioning.
must be exactly complied with in order to prevent Prior to installation, commissioning, operation,
endangering of persons. These also include in- maintenance, and repair, the specially trained per-
structions about particular dangers inherent in the sonnel must carefully read the entire installation
use of the screw compressor system. and operating manual and then keep it in a safe
place.
Failure to follow safety instructions can result in a
Attention: serious hazard for the personnel, the pressure
vessel or the environment.
Refers to working and operating processes which Pay close attention to chapter 1.5 "Manufacturer's
must be exactly complied with to prevent damage information" in this installation and operating man-
to or destruction of parts of the compact module ual.
screw compressor or the entire compressor sys- The following safety instructions relate only to the
tem. compact module screw compressor EVO-NK and
not to the entire screw compressor system.
It is mandatory to comply with the applicable na-
tional safety and occupational safety regulations
Note:
of the respective country in which the compressor
Indicates special information for better handling system is operated.
during operation, inspection, and adjustment pro- The manufacturer of the compressor system is re-
cesses and care work. sponsible for including the necessary safety regu-
lations for the operation of the in the instruction
manual of the system.
2.2 Safety regulations
The owner bears the responsibility for always
The regulations of the respective country for keeping the machine in safe operating condition.
placement into service and operation of screw Limits (pressures, temperatures, time settings,
compressor systems must be observed. In Ger- etc.) must be permanently marked.
many these include: Should a regulation contained in this list, especial-
– Directive 2006/42/EC (Machinery directive ly with regard to safety, not conform to legal regu-
MRL) lations, then the safer of the two applies.
– Directive 97/23/EC (Pressure equipment It is critical to be aware of and adhere to the safety
directive DGRL) instructions, technical data, limit values, installa-
tion guidelines, and instructions for transport, in-
– Ordinance on Industrial Safety and Health stallation, commissioning, operation, mainte-
(BetrSichV). nance, repair, disassembly, and storage given in
this installation and operating manual.
Do not carry out any modifications or rebuilding of During assembly, maintenance, and repair, make
the compressor module: modifications not autho- sure to keep everything absolutely clean. Keep dirt
rized by ROTORCOMP VERDICHTER GmbH away from the system. Cover parts and exposed
render the CE manufacturer's declaration invalid! openings with a clean cloth, paper or strips of ad-
hesive tape.
Observe the local safety regulations!
Installation, commissioning, operation, mainte- 2.3.1 Safety symbols
nance, repair, and disassembly must be carried
out only by authorized, trained, and qualified per-
sonnel. Warning:
The operating personnel are expected to safely Safety symbols and signs that are required for
use the working technology and to comply with all transport, installation, commissioning, operation,
applicable local operating safety rules and regula- maintenance, and repair must be permanently at-
tions. tached to the screw compressor system by the
Close-fitting clothing and the necessary personal manufacturer of the screw compressor system.
safety equipment must be used during transport, They must always be kept in a legible condition
installation, maintenance, repair, and disassembly and replaced if necessary.
of the compressor module.
Work on the electrical equipment must only be 2.3.2 Disposal
performed by a qualified electrician. Unqualified
persons must be prohibited from performing work
on electrical equipment! Attention:
The following apply to all installation, assembly, All parts of the compact module screw compressor
commissioning, maintenance, repair, and disas- must be disposed of and/or recycled in accor-
sembly work: dance with the applicable laws.
Oil filter cartridges, air-oil separating elements, lu-
– Ensure sufficient illumination of the compressor
bricant residues, used oil, and other materials con-
module.
taminated with oil must be collected and disposed
– Ensure sufficient tread safety in the region of of in accordance with the applicable regulations.
the compressor module.
Risk of injury from rotating and pressurized com-
ponents.
Risk of burns due to unit parts or oil hotter than
80 °C. Allow the screw compressor system to
cool.
Only use permissible or suitable tools for installa-
tion, assembly, maintenance, and repair work.
Do not perform welding work or any other work
that requires or produces heat near the oil system.
Only use the operating materials described above!
When handling oils, greases, and other chemical
substances, comply with the safety regulations
that are applicable for the product!
Make absolutely sure that no lubricants or oil es-
cape into the ground, the sewer system, or bodies
of water.
3 Technical Description
3.1 General overview of the EVO-NK compact module screw compressor
2 13
4 5 7
14 11
1 6
9 12
8
10
A B
1 1
Figure 3-11 Installation position of intake Figure 3-12 Intake air filter
valve (sample depiction) (sample depiction)
Attention:
Special applications, e.g. system installation in a
heavily soiled environment, mobile systems, etc.,
require 2-stage filters with a somewhat higher filter
resistance, but also a better degree of separation
for the protection of the compressor system.
1 2 3
1. Screw plug
2. Return line for oil separation
3. Non-return valve with external thread G ¼"
1
2
3
7
A B C
Figure 3-16 Minimum pressure valve b) Non-return valve
It prevents compressed air from flowing back out
A Minimum pressure valve closed
of the system or the owner's compressed-air res-
B Minimum pressure valve open
ervoir into the compact module screw compressor.
C Minimum pressure valve open, non-return
As a result, the system can be completely dis-
valve closed
charged when the separating tank is switched off.
1. Non-return valve plate
2. Non-return valve spring This valve operates automatically.
3. Seal
4. Pressure holding valve piston
5. Pressure holding valve spring Attention:
6. Pressure holding valve housing The minimum pressure valve integrated into the
7. Adjustment screw / counternut compact module screw compressor is not an over-
flow valve for continuous operation (it is only used
The minimum pressure valve is adjustable and for the starting sequence until the higher operating
can be fastened in two positions – with the air out- pressure is reached and subsequently determines
let toward the rear or toward the left (viewed from a higher system pressure).
the drive side).
The minimum pressure valve is located on the out-
let of the compressor upstream of the air cooler
and is used as a:
a) Pressure holding valve
When there is no counter-pressure, it prevents the
pressure from dropping below the minimum pres-
sure set at the pressure holding valve (factory set-
ting approx. 5.5 bar). This pressure is necessary
to ensure the oil supply of the compressor. At the
same time this is the condition for good oil separa-
tion.
The oil thermostat is maintenance-free. Operation 3.12 Safety valve (SV) (optional)
of the compressor system with an impermissible
overtemperature can result in a damage to the
working element, which can lead to an overheat-
ing of the screw compressor system. Consequent-
ly, ROTORCOMP VERDICHTER GmbH
recommends replacing the oil thermostat working
element when changing the oil and filter.
Note:
When the system is operated at 15 bar, the ther-
mostat working element must always be adapted
to the increased requirements.
Note:
Pressures that deviate from this require written ap-
proval from ROTORCOMP VERDICHTER GmbH!
4 Transport
Note:
4.1 Delivery and packing Each product is checked in accordance with the
The compact module screw compressor is deliv- type and quantity prior to shipment. Should you
ered in suitable packing in accordance with the nevertheless have a reason for complaint, please
selected shipping method and delivery terms. specify the order number.
Attention:
A damaged compressor module must not be
placed into service under any circumstances. In
case of transport damage, damage claims must
be secured in your interest by calling in represen-
tatives of the transport company promptly for
determination of damage, i.e.:
A) Externally visible damage or losses
– must be certified with a corresponding note on
the freight bill before the merchandise is
accepted. With rail transports, a record of the
facts must also be requested from the railroad.
– with postal consignments, the damage must be
certified in writing by the postal service before
accepting damaged packages etc.
B) In case of damage that is not immediately
perceptible
– and is discovered during unpacking, the carrier
must be notified immediately and in writing.
– if possible, leave packing materials and dam-
aged products in an unaltered state until the
factual report is completed.
Above all, comply with the complaint deadlines.
Warning:
Falling or tipped-over cargo can result in death or
serious injuries!
– Transport of the compressor module must be
carried out only by qualified personnel.
– Observe the local safety regulations!
– Select the lifting equipment in accordance with
the total weight to be transported!
– Use personal safety equipment!
– Remove all loose or swinging parts before lift-
ing the compressor module!
– Only transport the compressor module while
depressurized!
– When transported on a pallet, the compressor
module must be securely fastened to it!
– Do not transport the compressor module on the
forks of a stacker or lift truck!
– Transport eyes are only designed for transport-
ing the compressor module!
– Do not stand or walk under cargo during trans-
port!
Attention:
Under no circumstances should the compressor
module be lifted by its drive shaft or attachments.
Use only the transport eyes for lifting the unit with
lifting equipment.
Figure 4-1 Transport options
(sample depiction)
To transport on a pallet, secure the compressor
module to the pallet with angle brackets
(see Figure 4-1).
Attention:
– The maximum permissible tightening torque for
all screw connections may not be exceeded.
Refer to VDI 2330 (see chapter 9.6 "Tightening
torques".
– Only screws suitable for fastening the com-
pressor housing may be used for this purpose.
Attention:
– Conical threads must not be used because
they can damage the housing of the compres-
sor module when they are screwed in (see
installation drawing).
– All connection lines for gas, oil and control lines
must be connected to the compressor module
so that no pulling, pressure, or bending forces
can be introduced into the housing via the con-
nection lines (flexible connections).
5.2 Safety precautions for installation – Make sure that the pressure line from the com-
and assembly pressor to the cooler or air system can expand
as a result of the heat and does not come into
contact with flammable materials.
Warning:
– No external force may be exerted on the air out-
– It is absolutely mandatory to follow the safety let valve; the connected pipe connection must
instructions contained in chapter 2 "Safety pre- be mounted torque-free.
cautions".
– It is not permissible to install and operate the 5.3 Installation
compact module screw compressor in the
vicinity of flammable or combustible materials. Ensure good accessibility to the service points
when installing the compact module screw com-
– Secure the compressor module to prevent it
pressor:
from tipping over.
– Oil filling point
– Suitable lifting equipment must be used for lift-
ing the compressor module. – Oil drain point
– Under no circumstances should the compres- – Removal of the separator cartridge (removal
sor module be lifted by its drive shaft or attach- dimensions according to offer drawing)
ments; use only the transport eyes.
– Removal of the oil filter cartridge (observe the
– Do not stand or walk under the raised compres- removal dimensions specified in the offer draw-
sor module! ing)
– Before attaching to pressurized system parts, – Easy cleaning of the oil cooler
the system must be effectively cut off from all
– Replacement of the shaft seal (removal and
pressure sources and a pressure relief of the
installation of the end cover and the bearing
entire system must be carried out.
race)
RISK OF INJURY due to escaping compressed
air or oil! – Belt drive and clutch (accessibility, specifica-
tions for correct belt tension)
– Do not perform welding work or any other work
that requires or produces heat near the oil sys-
tem. Attention:
– The compressor block must be provided with a – The compact module screw compressor must
sufficiently dimensioned ground. be installed in a place in which the ambient air
– A safety valve must be installed prior to com- is as cool and clean as possible. Never cover
missioning. the air inlet. It must be ensured that the pene-
Operation of the compressor system without a tration of moisture with the intake air is kept to
safety valve can be life-threatening! a minimum.
– Screw compressors must always be installed in
stable fashion on a level surface and must be
Attention: aligned with a level if necessary.
In exceptional cases, e.g. with mobile systems,
– Check whether the electrical data of the com- these may only be operated up to a maximum
pressor module and compressor system angle of inclination of 10°.
match.
– All blind flanges, plugs, caps and bags with
desiccant must be removed before mounting
the pipes. Screw fittings and pipe connections
must be of the correct size and must be suitable
for the respective operating pressure.
– The gas drawn in must not contain caustic or
aggressive vapors.
The base frame for the following fastening ver- 5.4 Drive
sions must be torsionally rigid and level.
The fastening of the compressor module to a base The compact module screw compressor is
frame together with the drive motor can be designed to be driven by electric motors, internal
designed in accordance with the following ver- combustion engines, hydraulic motors, etc.
sions. The power can be transmitted indirectly via a belt
drive (V-belt, toothed belt, etc.) or directly via a
5.3.1 Fastening to base frame with screw flexible coupling.
fitting The rotation direction is counterclockwise when
looking at the shaft (it rotates to the left).
On the model with a transmission, the rotation
direction is clockwise when looking at the shaft (it
rotates to the right).
Attention:
In the design of the drive unit, it is in general nec-
essary to ensure that the drive shaft has axial
clearance and should under no circumstances be
subjected to compressive or tensile stress.
Attention:
Figure 5-1 Fastening to base frame
(sample depiction) Transmission versions of the compact module
screw compressor must not be provided with a
belt drive.
Attention:
The compact module screw compressor may only Improper design and/or installation of the V-belt
be fastened at the side holes on the compressor drive can result in a considerable reduction in
housing provided for this purpose. bearing life and/or breakage of the drive shaft.
The unit must be fastened torque-free to the In the event of drive shaft breakage and/or prema-
respective fastening points 1 on the left and right ture bearing damage, ROTORCOMP
on the base frame. VERDICHTER GMBH can only honor the war-
ranty if the belt drive has been properly designed
and implemented.
The following information must be observed for
this purpose.
– The belt drive must not be over-dimensioned.
Maximum design power for a belt drive at the
max. speed for this compressor module see
chapter 9 "Technical Data and Tightening
Torques".
– The belt pulley must be pushed onto the drive
shaft as far as possible and secured.
– Observe the belt tension forces and tensioning
direction for the different belt types (V-belt, flat
belt, toothed belt, etc.).
Warning: Warning:
Storage time and service life when using hydraulic – It is absolutely mandatory to follow the safety
hoses: instructions contained in chapter 2 "Safety pre-
cautions".
– It is not permissible for the service life of the
hose lines to exceed a maximum of 6 years, – Before disassembly of pressurized system
including storage time of at most 2 years parts, the system must be effectively cut off
(Excerpt from DIN 20066). from all pressure sources and a pressure relief
The service life is understood to include the of the entire system must be carried out.
duration of use and possibly storage of a hose RISK OF INJURY due to spurting oil or escap-
starting from the manufacture date. ing compressed air!
– When a hose line is manufactured, the hose – When lifting and transporting the compact mod-
(hose by the meter) must not be older than four ule screw compressor, it is absolutely manda-
years old. tory to follow all safety instructions contained in
chapter 4 "Transport".
Lay the cooler connection lines safely to prevent
tripping, catching, damage, wedging, detachment, – All disassembly work must be performed only
falling, etc. with the compressor system and power supply
switched off. When doing so, the system must
be secured to prevent it from being accidentally
switched on.
Attention:
– Secure the compressor module to prevent it
The cooler connection lines must be connected from tipping over.
torque-free to the oil connections.
The following information on the design and exe-
cution of the oil cooling system must be observed.
Attention:
– The oil cooling system must be designed so
that the oil outlet temperature is a maximum of – Catch oil residues in suitable containers.
105°C/220°F at the maximum intended ambi-
– Oil filter cartridges, air-oil separating elements,
ent temperature.
lubricant residues, used oil, and other materials
The pressure losses in the cooler circuit should
contaminated with oil must be disposed of in
be no greater than 1.5 bar.
accordance with the applicable regulations.
– The cooler connection lines must be connected
– After decommissioning, the parts of the com-
to the oil connections in a torque-free fashion.
pressor module must be disposed of and/or
recycled in accordance with the applicable
laws.
Note:
– The oil circulation quantity depends on the final
pressure of your application.
– The oil cooler must be installed so that it can be
cleaned easily.
5.8 Storage
Attention:
– To prevent contamination, cover parts and
exposed openings with a clean cloth, paper or
strips of adhesive tape.
– Store in a dry place away from sunlight.
– When storing the compressor module for a
period longer than 6 months, use of a rust-
proofing (corrosion protection) is absolutely
mandatory.
6 Commissioning
Attention:
– Be sure to observe the rotation direction (see
Warning: chapter 6.2 "Checking rotation direction").
It is absolutely mandatory to follow the safety – Do not use the EMERGENCY OFF button or
instructions contained in chapter 2 "Safety precau- main switch to switch off a compact module
tions". screw compressor running under load.
– Checking the oil level (see chapter 7.4 "Oil
6.1 Preparation for commissioning level")
The components of the compact module screw – With a belt drive: checking the belt tension and
compressor are carefully checked and tested at belt routing (see chapter 7 "Maintenance and
the factory. These tests ensure that the required repair").
performance and checking data are complied with. – Checking the position of the shut-off valve (by
The compressor module must nevertheless be the operator).
monitored during the first operating hours.
• Filling the compact module screw compressor 6.2 Checking rotation direction
with oil (see chapter 7.5.3 "Filling with oil").
Rotation direction:
Standard model rotating to the left (counterclock-
wise) looking at the shaft.
Warning:
Transmission model rotating to the right (clock-
Compliance with the applicable regulations of the wise) looking at the shaft.
specific country with regard to commissioning is
mandatory. In Germany these include the Operat-
ing Safety Ordinance. Attention:
The following points must be observed prior to The rotation direction of the screw compressor
commissioning: system must be checked during commissioning
– A safety valve must be installed prior to com- and each time changes are made to the electrical
missioning. supply line of the electric motor drive. For this pur-
Operation of the screw compressor system pose, switch on the drive motor briefly and then
without a safety valve can be life-threatening! switch off again immediately.
– Check all screw fitting and fastening screws for Rotation for more than 2 seconds in the wrong
firm seating. rotation direction will destroy the compact module
RISK OF INJURY due to spurting oil or escap- screw compressor. If necessary, reverse the con-
ing compressed air! nections of the connecting cable.
– Operate the compressor system until it has • Once again, manually rotate the compressor
reached its steady-state temperature. This module compressor stage in the rotation direc-
should ensure that the compact module screw tion several times.
compressor does not subsequently become • Check the oil level in the separating tank and
impermissibly hot or is not operated at too low top up if necessary (see chapter 7 "Mainte-
of a temperature. nance and repair").
– Listen for abnormal running noise. • Monitor operation of the compressor system for
After the test run: at least 15 minutes, but at least until the steady-
state temperature is reached (continuous oper-
– Check the compressor system for leaks. ating temperature) (see chapter 6.3 "Test run").
– Check the oil level (see chapter 7.4 "Oil level").
Attention:
– With hot oil, the oil level can be approx. 10 mm
higher than with cold oil shortly after discharg-
ing.
As a result, oil may escape when the screw
plug is opened at the maximum oil level. In this
case, close the screw plug again immediately
and carefully remove the oil that has escaped.
– Only check the oil level when the compressor
system is in a horizontal position.
1 Warning:
Unit parts can be hotter than 80°C!
RISK OF BURNS!
Wear personal safety equipment!
Note:
The screw cap of the oil filler neck is provided with
a safety hole on the side from which oil or air
escapes if there is any residual pressure in the
separating tank. Wait briefly in this case.
Attention:
Dispose of the used oil and the oil-contaminated
container and cloths in accordance with the appli-
cable regulations.
7.7 Air-oil separating element 7.7.2 Changing the air-oil separating element
Warning:
– Rotating and pressurized components.
RISK OF INJURY!
– Unit parts and oil can be hotter than 80 °C.
RISK OF BURNS!
Wear personal safety equipment!
– The air-oil separating elements must only be
replaced when the compressor system is
stopped and completely depressurized.
Attention:
Dispose of the old air-oil separating elements in
accordance with the applicable regulations.
7.8 Intake air filter • Insert the new filter element in the filter hous-
ing.
7.8.1 Maintenance intervals
• Lay on the filter cover, ensuring proper posi-
According to the specifications of the system man- tioning during assembly.
ufacturer. Reference values for the compact mod-
ule screw compressor, see chapter 7.10 "Mainte- • Tighten the wing nut.
nance intervals". • Switch on the system.
In case of heavily soiled intake air, an earlier • Conduct a test run and an operating test.
replacement of the filter element is necessary
when the optical or electric maintenance indicator
(optional) indicates this (perm. vacuum up to
50 mbar).
Attention:
– Dirt and dust particles must not be permitted to
get into the air inlet of the compressor module.
– It is not permissible to clean the filter element;
the filter element must always be replaced in
case of soiling!
– Dispose of the old air filter element according to
the applicable regulations.
Attention:
The frequency of the maintenance intervals (oil
change, replacement of oil filter, air-oil separating
elements, and air filter element) varies depending
on the application and the operating parameters.
Depending on the design of the system, mainte-
nance interval should therefore be specified by the
compressor manufacturer. These must be given
priority. It is advisable to conclude a maintenance
agreement.
The following table provides an overview of the
reference values for the EVO-NK compact module
screw compressor.
1*) 2*)
Warning: Warning:
Immediately switch off the system, have the defi- Have leaks and damage remedied immediately!.
ciency remedied RISK OF INJURY due to spurting oil or escaping
compressed air!
It is not permissible to repair hydraulic hoses.
3*)
Warning:
It is not permissible to repair hose lines.
Relative humidity
Intake air temperature [ºC]
Examples:
Note:
1*)An intake air temperature of 20 °C and a
humidity of 50% result in approx. 8.6 g/m3 of The optimum operating temperatures for the
absolute humidity in the intake air. screw compressor system can only be achieved if
At a pressure of 10 bar, the pressure dew point the oil circuit components (thermostat, cooler, fan,
is approx. 51°C/124°F. etc.) have been properly designed and the supply
and exhaust air temperatures of the installation
2*)An intake air temperature of 40 °C and a room and the compressor system permit this. The
humidity of 90% result in approx. 45.6 g/m3 of entire thermal economy must be calculated.
absolute humidity in the intake air.
At a pressure of 10 bar, the pressure dew point
is approx. 92°C/198°F. 8.6 Condensation damage
Attention:
Attention:
The operating temperature must be above the
The relative humidity and the final operating pres-
pressure dew point.
sures must always be taken into account in accor-
dance with the selection graph for the working
temperature of the oil thermostat working element
and for the compressor operating temperature in
order to prevent condensate from forming in the
system.
Note:
– This table contains only general technical data
for this compact module screw compressor.
– Calculation and design are governed by the
corresponding data sheet from ROTORCOMP
VERDICHTER GmbH.
Note:
– This table contains only general technical data
for this compact module screw compressor.
– Calculation and design are governed by the
corresponding data sheet from ROTORCOMP
VERDICHTER GmbH.
Note:
– This table contains only general technical data
for this compact module screw compressor.
– Calculation and design are governed by the
corresponding data sheet from ROTORCOMP
VERDICHTER GmbH.
Note:
– This table contains only general technical data
for this compact module screw compressor.
– Calculation and design are governed by the
corresponding data sheet from ROTORCOMP
VERDICHTER GmbH.
Note:
– This table contains only general technical data
for this compact module screw compressor.
– Calculation and design are governed by the
corresponding data sheet from ROTORCOMP
VERDICHTER GmbH.
Attention:
The maximum permissible tightening torque for all
screw connections may not be exceeded.
See VDI 2230.
10 Troubleshooting
Warning:
The owner must ensure that troubleshooting is – It is absolutely mandatory to follow the safety
carried out by authorized, qualified specialists that instructions contained in chapters 2 "Safety
have sufficiently informed themselves ahead of precautions", 5 "Installation and assembly,
time through careful study of the installation and disassembly, storage" and 7 "Maintenance and
operating manual. Following commissioning, the repair".
owner bears all responsibility and liability for trou- – In the event of malfunctions or damage, the
bleshooting. compressor system must be immediately
stopped and the deficiency remedied.
– The compressor system may only be placed
back into operation after all malfunctions and
damage have been remedied.
TECHNICAL SPECIFICATION
ROTORCOMP VERDICHTER GmbH • Industriestr. 9 • 82110 Germering • Germany • Tel.: +49 (0)89 7 24 09-0 • Fax: +49 89 7 24 09-38
EVO9-NK-GAS | ROTORCOMP®
DIMENSIONS
Measures in mm (inch)
560 592
(22.0”) (23.3”)
60
(2.4”)
(6. 70
)
7”
1
(Ø 1.8”)
Ø 45
(23.5”)
598
(Ø 1.7”)
Ø 42
74
(2.9”)
692
(27.2”)
IN NOVATIO N QUALI T Y R E L IA B IL IT Y WO R L DW ID E
2 | EVO®-GAS & EVO®-NK-GAS ROTORCOMP VERDICHTER
TECHNICAL DATA
Capacity in Air at Pressure Range
Type Max. Shaft Power Speed Range rpm vi Net Weight
7 barg / 100 psig bar
kW hp m³/h mcfd from to from to kg lbs
EVO28-Gas 160 220 1,500 1,271 4 15 1,000 4,000 4.1 269 593
EVO76-Gas 540 725 4,560 3,864 4 17 1,000 3,000 5.0 1,289 2,842
ROTORCOMP VERDICHTER EVO®-GAS & EVO®-NK-GAS | 3
TECHNICAL DATA
Capacity in Air at Pressure Range
Type Max. Shaft Power Speed Range rpm vi Net Weight
7 barg / 100 psig bar
kW hp m³/h mcfd from to from to kg lbs
EVO28-G-Gas 160 220 1,500 1,271 4 15 1,000 4,000 4.1 323 712
EVO40-G-Gas 260 350 2,400 2,034 4 17 1.000 4,900 5.0 533 1,175
EVO76-G-Gas 540 725 4,560 3,864 4 17 1,000 3,000 5.0 1,461 3,221
EVO105-G-Gas 670 900 6,300 5,339 4 14 1,000 3,000 5.0 1,630 3,593
TECHNICAL DATA
Capacity in Air at
Type Max. Shaft Power Pressure Range Speed Range rpm vi Net Weight
7 barg / 100 psig
kW hp m³/h mcfd from to from to kg lbs
TECHNICAL DATA
TECHNICAL
Type DATA
Max. Shaft Power
Capacity in Air at
7 barg / 100 psig
Pressure Range Speed Range rpm vi Net Weight
››Simplified service and maintenance Types from EVO3-NK-Gas on are available with gear box.
6 | EVO®-GAS & EVO®-NK-GAS ROTORCOMP VERDICHTER
OUR COMPANY
BENCH TEST
AREAS OF APPLICATION
IN CNG DESPENSER STATIONS AS FIRST STAGE IN H2 REFORMER STATIONS FOR FUEL GAS CELLS
IM 01C25F01-01E
16th Edition
Toc-1
Contents
1. Introduction................................................................................................ 1-1
Regarding This Manual................................................................................................. 1-2
Trademarks ................................................................................................................... 1-2
1.1 Safe Use of This Product .................................................................................. 1-3
1.2 Warranty.............................................................................................................. 1-5
2. Handling Cautions..................................................................................... 2-1
2.1 Model and Specifications Check...................................................................... 2-1
2.2 Unpacking........................................................................................................... 2-1
2.3 Storage................................................................................................................ 2-1
2.4 Selecting the Installation Location ................................................................. 2-2
2.5 Pressure Connection......................................................................................... 2-2
2.6 Waterproofing of Cable Conduit Connections............................................... 2-2
2.7 Restrictions on Use of Radio Transceivers.................................................... 2-2
2.8 Insulation Resistance and Dielectric Strength Test....................................... 2-3
2.9 Installation of an Explosion-Protected Instrument........................................ 2-3
2.9.1 FM Approval........................................................................................ 2-4
2.9.2 CSA Certification................................................................................. 2-6
2.9.3 ATEX Certification............................................................................... 2-9
2.9.4 IECEx Certification............................................................................ 2-13
2.10 EMC Conformity Standards............................................................................ 2-16
2.11 Pressure Equipment Directive (PED)............................................................ 2-16
2.12 EU RoHS Directive........................................................................................... 2-17
2.13 Safety Requirement Standards...................................................................... 2-17
3. Component Names................................................................................... 3-1
4. Installation.................................................................................................. 4-1
4.1 Precautions ........................................................................................................ 4-1
4.2 Mounting ............................................................................................................ 4-1
4.3 Rotating Transmitter Section............................................................................ 4-2
4.4 Changing the Direction of Integral Indicator ................................................. 4-2
IM 01C25F01-01E
Toc-3
7.5.15 Local Parameter Setting Lock........................................................... 7-11
7.5.16 Others............................................................................................... 7-11
8. Maintenance............................................................................................... 8-1
8.1 Overview............................................................................................................. 8-1
8.2 Calibration Instruments Selection................................................................... 8-1
8.3 Calibration.......................................................................................................... 8-1
8.4 Disassembly and Reassembly......................................................................... 8-3
8.4.1 Replacing the Integral Indicator.......................................................... 8-3
8.4.2 Replacing the CPU Board Assembly.................................................. 8-4
8.4.3 Cleaning and Replacing the Capsule Assembly...........................8-5
8.5 Troubleshooting................................................................................................. 8-5
8.5.1 Basic Troubleshooting........................................................................ 8-6
8.5.2 Troubleshooting Flowcharts................................................................ 8-6
8.5.3 Alarms and Countermeasures............................................................ 8-8
9. General Specifications............................................................................. 9-1
Revision Information
IM 01C25F01-01E
<1. Introduction> 1-1
1. Introduction
Thank you for purchasing the DPharp EJX and EJA
Differential Pressure and pressure transmitter. WARNING
Your transmitter was precisely calibrated at the
When using the transmitters in a Safety
factory before shipment. To ensure both safety and
Instrumented System application, refer to the
efficiency, please read this manual carefully before
Functional Safety Manual (Document No.:
you operate the instrument.
TI 01C25A05-01EN or TI 01C25A05-21EN for
option code SLT) and follow the instructions and
NOTE procedures described there.The document can
This manual describes the hardware be downloaded from the website of Yokogawa.
configurations of the transmitters listed in below. (Website address:
For information on the software configuration https://www.yokogawa.com/solutions/products-
and operation, please refer to either platforms/field-instruments/)
IM 01C25T03-01E for the BRAIN communication In order to satisfy the requirement of Safety
type, or IM 01C25T01-06EN for the HART Instrumented System, executing parameters
communication type. setting is required. Please refer to the clause
of “Setting Parameters” for setting range in the
For FOUNDATION Fieldbus protocol type, please following manuals for the actual operation.
refer to IM 01C25T02-01E. BRAIN: IM 01C25T03-01E
For PROFIBUS PA protocol type, please refer to HART: IM 01C25T01-06EN
IM 01C25T04-01EN. Please also refer to the contact output setting in
For the specifications, external dimensions, and the same clause. After installing the transmitter,
model, suffix and option codes of each product, confirm that the range and unit is set correctly.
please refer to the General Specifications sheet Calibration of the transmitters shall be done after
as listed in the Chapter 9. completing the range setting.
IM 01C25F01-01E
<1. Introduction> 1-2
Regarding This Manual
WARNING
• This manual and the identification tag attached
on the packing box are essential parts of the Indicates a potentially hazardous situation which,
product. Please keep them in a safe place for if not avoided, could result in death or serious
future reference. injury.
• This manual should be provided to the end
user.
• The contents of this manual are subject to CAUTION
change without prior notice.
Indicates a potentially hazardous situation which,
• All rights reserved. No part of this manual may if not avoided, may result in minor or moderate
be reproduced in any form without Yokogawa’s injury. It may also be used to alert against unsafe
written permission. practices.
• Yokogawa makes no warranty of any kind with
regard to this manual, including, but not limited
to, implied warranty of merchantability and IMPORTANT
fitness for a particular purpose.
Indicates that operating the hardware or software
• If any question arises or errors are found, or if in this manner may damage it or lead to system
any information is missing from this manual, failure.
please inform the nearest Yokogawa sales
office.
• The specifications covered by this manual are NOTE
limited to those for the standard type under the
specified model number break-down and do not Draws attention to information essential for
cover custom-made instruments. understanding the operation and features.
IM 01C25F01-01E
<1. Introduction> 1-3
1.1 Safe Use of This Product (c) Operation
WARNING WARNING
• The instrument must be installed by an • Please do not carry out except being written
expert engineer or a skilled personnel. The to maintenance descriptions. When these
procedures described about INSTALLATION procedures are needed, please contact
are not permitted for operators. nearest YOKOGAWA office.
• In case of high process temperature, care • Care should be taken to prevent the build
should be taken not to burn yourself because up of drift, dust or other material on the
the surface of body and case reaches a high display glass and name plate. In case of its
temperature. maintenance, soft and dry cloth is used.
• The instrument installed in the process is
under pressure. Never loosen the process
connection to avoid the dangerous spouting (e) Explosion Protected Type Instrument
of process fluid.
• During draining condensate from the
WARNING
pressure detector section, take appropriate
care to avoid contact with the skin, eyes • Users of explosion proof instruments should
or body, or inhalation of vapors, if the refer first to section 2.4 (Installation of an
accumulated process fluid may be toxic or Explosion Protected Instrument) of this
otherwise harmful. manual.
• When removing the instrument from • The use of this instrument is restricted to
hazardous processes, avoid contact with the those who have received appropriate training
fluid and the interior of the meter. in the device.
• All installation shall comply with local • Take care not to create sparks when
installation requirement and local electrical accessing the instrument or peripheral
code. devices in a hazardous location.
WARNING WARNING
• The instrument must be installed by an Yokogawa will not be liable for malfunctions or
expert engineer or a skilled personnel. The damage resulting from any modification made to
procedures described about WIRING are not this instrument by the customer.
permitted for operators.
• Please confirm that voltages between the
power supply and the instrument before (g) Product Disposal
connecting the power cables and that the The instrument should be disposed of in
cables are not powered before connecting. accordance with local and national legislation/
regulations.
IM 01C25F01-01E
<1. Introduction> 1-4
(h) Authorized Representative in EEA
In relation to the CE Marking, The authorized representative for this product in the EEA (European Economic
Area) is:
Yokogawa Europe B.V.
Euroweg 2, 3825 HD Amersfoort,The Netherlands
产品中有害物质或元素的名称及含量
有害物质
型号 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚
(Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE)
壳体 × ○ ○ ○ ○ ○
EJX/EJA-E 膜盒组件 × ○ ○ ○ ○ ○
Series
差压/压力变送器 基板组件 × ○ ○ ○ ○ ○
电源连接线 × ○ ○ ○ ○ ○
○:表示该部件的所有均质材料中的有害物质的含量均在 GB/T26572 标准中所规定的限量以下。
环保使用期限:
注)该年数为“环保使用期限”,并非产品的质量保证期。
IM 01C25F01-01E
<1. Introduction> 1-5
1.2 Warranty
• The warranty shall cover the period noted on
the quotation presented to the purchaser at the
time of purchase. Problems occurring during
the warranty period shall basically be repaired
free of charge.
• If any problems are experienced with this
instrument, the customer should contact the
Yokogawa representative from which this
instrument was purchased or the nearest
Yokogawa office.
• If a problem arises with this instrument,
please inform us of the nature of the problem
and the circumstances under which it
developed, including the model specification
and serial number. Any diagrams, data and
other information you can include in your
communication will also be helpful.
• The party responsible for the cost of fixing the
problem shall be determined by Yokogawa
following an investigation conducted by
Yokogawa.
• The purchaser shall bear the responsibility for
repair costs, even during the warranty period, if
the malfunction is due to:
IM 01C25F01-01E
<2. Handling Cautions> 2-1
2. Handling Cautions
This chapter provides important information on how 2.1 Model and Specifications
to handle the transmitter. Read this carefully before
using the transmitter.
Check
The model name and specifications are written on
The transmitters are thoroughly tested at the
the name plate attached to the case.
factory before shipment. When taking delivery of an
instrument, visually check them to make sure that
no damage occurred during shipment.
Also check that all transmitter mounting hardware
shown in figure 2.1 is included. If the transmitter
is ordered without the mounting bracket and the
process connector, the transmitter mounting
hardware will not be included. After checking the
transmitter, carefully repack it in its box and keep it
there until you are ready to install it. F0202.ai
2.2 Unpacking
Keep the transmitter in its original packaging to
prevent it from being damaged during shipment.
Mounting bracket Do not unpack the transmitter until it reaches the
installation site.
IM 01C25F01-01E
<2. Handling Cautions> 2-2
(b) When storing the transmitter, repack it carefully 2.5 Pressure Connection
in the packaging that it was originally shipped
with.
WARNING
(c) If the transmitter has been used, thoroughly
clean the chambers inside the cover flanges, so • Never loosen the process connection when
that there is no process fluid remaining inside. an instrument is installed in a process. The
Before placing it in storage, also make sure that device is under pressure, and a loss of seal
the pressure-detector is securely connected to can result in a sudden and uncontrolled
the transmitter section. release of process fluid.
• When draining toxic process fluids that have
2.4 Selecting the Installation condensed inside the pressure detector,
take appropriate steps to prevent the contact
Location of such fluids with the skin or eyes and the
The transmitter is designed to withstand severe inhalation of vapors from these fluids.
environmental conditions. However, to ensure
that it will provide years of stable and accurate The following precautions must be observed
performance, take the following precautions when in order to safely operate the transmitter under
selecting the installation location. pressure.
(a) Ambient Temperature (a) Make sure that all the process connector bolts
Avoid locations subject to wide temperature are tightened firmly.
variations or a significant temperature gradient. (b) Make sure that there are no leaks in the impulse
If the location is exposed to direct sunlight or piping.
radiant heat from plant equipment, provide (c) Never apply a pressure higher than the
adequate shade, thermal insulation and/or specified maximum working pressure.
ventilation.
(b) Ambient Atmosphere 2.6 Waterproofing of Cable
Do not install the transmitter in a corrosive Conduit Connections
atmosphere. If this cannot be avoided, there
must be adequate ventilation as well as Apply a non-hardening sealant to the threads
measures to prevent the leaking of rain water to waterproof the transmitter cable conduit
and the presence of standing water in the connections. (See figure 6.8, 6.9 and 6.10.)
conduits.
(c) Shock and Vibration 2.7 Restrictions on Use of Radio
Although the transmitter is designed to be Transceivers
relatively resistant to shock and vibration, an
installation site should be selected where this is IMPORTANT
kept to a minimum.
Although the transmitter has been designed to
(d) Installation of Explosion-protected Transmitters
resist high frequency electrical noise, if a radio
An explosion-protected transmitters is
transceiver is used near the transmitter or its
certified for installation in a hazardous area
external wiring, the transmitter may be affected
containing specific gas types. See subsection
by high frequency noise pickup. To test this, start
2.9 “Installation of an Explosion-Protected
out from a distance of several meters and slowly
Transmitters.”
approach the transmitter with the transceiver
while observing the measurement loop for noise
effects. Thereafter use the transceiver outside
the range where the noise effects were first
observed.
IM 01C25F01-01E
<2. Handling Cautions> 2-3
2.8 Insulation Resistance and • Dielectric Strength Test
IM 01C25F01-01E
<2. Handling Cautions> 2-4
2.9.1 FM Approval
WARNING
a. FM Intrinsically Safe/Nonincendive for
Maintaining the safety of explosionproof HART/BRAIN Protocol Type
equipment requires great care during mounting,
wiring, and piping. Safety requirements also Note 1. EJX/EJA-E Series pressure transmitters
place restrictions on maintenance and repair. with optional code /FS1 are applicable for
Please read the following sections very carefully. use in hazardous locations.
• Applicable Standard:
FM 3600:2011
FM 3610:2010
WARNING FM 3611:2004
The range setting switch must not be used in a FM 3810:2005
hazardous area. ANSI/ISA-60079-0-2009
ANSI/ISA-60079-11-2009
ANSI/ISA-61010-1-2004
NEMA 250:1991
IMPORTANT • Rating
For combined approval types Intrinsically Safe for
Once a device of multiple approval type is Class I, II, III Division 1,
installed, it should not be re-installed using any Groups A, B, C, D, E, F, G T4
other approval types. Apply a permanent mark Class I Zone 0 AEx ia IIC T4
in the check box of the selected approval type Nonincendive for
on the certification label on the transmitter to Class I, II, III Division 2
distinguish it from unused approval types. Groups A, B, C, D, F, G T4
Class I, Zone 2 Group IIC T4
• Ambient temperature: –60 to 60°C
IMPORTANT • Enclosure: Type 4X
All the blind plugs which accompany the EJX/ Note 2. Installation
EJA-E transmitters upon shipment from the Installation should be in accordance with
factory are certified by the applicable agency Control Drawing IFM022-A12.
in combination with the transmitters. The plugs Note 3. Specific conditions of use
which are marked with the symbols “◊ Ex” on Precautions shall be taken to minimize the risk
their surfaces are certified only in combination from electrostatic discharge of painted parts.
with the EJX/EJA-E series transmitters. When the enclosure of the Pressure
Transmitters is made of aluminum alloy, if it is
mounted in Zone 0, it shall be installed such
that, even in the event of rare incidents, an
ignition source due to impact and/or friction
sparks is excluded.
Note 4. Maintenance and Repair
Only personnel authorized by Yokogawa
Electric Corporation can repair the equipment.
IM 01C25F01-01E
<2. Handling Cautions> 2-5
Model: EJX Series Date: October 22, 2003 b. FM Explosionproof Type
Control Drawing
Groups B, C and D.
General
EJX Series Purpose
Pressure T ransmitter Equipment
-
painted parts.
When the enclosure of the Pressure Transmitters is made of aluminum alloy, if it is
Note 2. Wiring
mounted in Zone 0, it must be installed such that, even in the event of rare
incidents, an ignition source due to impact and/or friction sparks is excluded. • All wiring shall comply with National Electrical
Entity Parameters [Groups: A, B, C, D, E, F and G]
Vmax: 30 V
Code ANSI/NFPA70 and Local Electrical
Imax: 200 mA
Pmax: 1 W Codes.
Ci: 6 nF
Li: 0 µH
Entity Parameters [Groups: C, D, E, F and G]
• When installed in Division 1, “FACTORY
Vmax: 30 V
Imax: 225 mA SEALED, CONDUIT SEAL NOT
Pmax: 1 W
Ci: 6 nF
Li: 0 µH
REQUIRED.”
Notes: • Wiring connection for output signal code Q
1. Installation must be in accordance with the National Electric Code (NFPA70),
ANSI/ISA-RP12.06.01, and relevant local codes.
2. The Associated Apparatus must be FM -approved.
(Low Power type) shall follow the diagram
3. The following conditions must be satisfied.
Voc (or Uo) ≤ Vmax below.
Isc (or Io) ≤ Imax
Po ≤ Pmax Pressure Transmitters
Ca (or Co) ≥ Ci + Ccable
La (or Lo) ≥ Li + Lcable
4. In case Nonincendive Field Wiring Concept is used for the interconnection, SUPPLY +
FM-approved Associated Nonincendive Field Wiring Apparatus, which meets the
above conditions, must be used as the General Purpose Equipment. Voltmeter
5. The General Purpose Equipment connected to the Associated Apparatus must not A Power Supply
use or generate a voltage more than Um of the Associated Apparatus.
6. The control drawing of the Associated Apparatus must be followe d when installing + +
the equipment.
7. Dust-tight conduit seals must be used when installed in Class II or Class III
environments.
8. WARNING –ELECTROSTATIC CHARGE MAY CAUSE AN EXPLOSION HAZARD. – –
AVOID ANY ACTIONS THAT CAUSE THE GENERATION OF ELECTROSTATIC
CHARGE, SUCH AS RUBBING WITH A DRY CLOTH ON COATING FACE OF THE
PRODUCT. SUPPLY –
9. WARNING – SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC
SAFETY AND SUITABILITY FOR HAZARDOUS LOCATION
Three-Wire Connection
Pressure Transmitters
SUPPLY +
Voltmeter
Rev.3: July 16, 2019 Doc. No.: IFM022-A12 P.2
A Power Supply
Yokogawa Electric Corporation + +
– –
SUPPLY –
Four-Wire Connection
F0211.ai
IM 01C25F01-01E
<2. Handling Cautions> 2-6
Note 3. Operation Certificate: 1606623
• Keep the “WARNING” nameplate attached to Applicable Standard:
the transmitter. C22.2 No.0
WARNING: OPEN CIRCUIT BEFORE C22.2 No.94
REMOVING COVER. FACTORY SEALED, C22.2 No.157
CONDUIT SEAL NOT REQUIRED. C22.2 No.213
INSTALL IN ACCORDANCE WITH THE C22.2 No.61010-1
USERS MANUAL IM 01C25. C22.2 No.61010-2-030
• Take care not to generate mechanical CAN/CSA-C22.2 60079-0:07
sparking when accessing to the instrument CAN/CSA-E60079-11:02
and peripheral devices in a hazardous CAN/CSA-E60079-15:02
location. CAN/CSA-C22.2 No.60529
ANSI/ISA-12.27.01
Note 4. Maintenance and Repair
[For Devision system]
• The instrument modification or parts
• Intrinsically Safe for Class I, Division 1,
replacement by other than authorized
Groups A, B, C & D, Class II, Division 1,
representative of Yokogawa Electric
Groups E, F & G, Class III, Division 1
Corporation is prohibited and will void
• Nonincendive for Class I, Division 2, Groups
Factory Mutual Explosionproof Approval.
A, B, C & D, Class II, Division 2, Groups F &
c. FM Intrinsically Safe Type/FM G, Class III, Division 1
Explosionproof Type • Enclosure: Type 4X
EJX/EJA-E Series pressure transmitters with • Temp. Code: T4
optional code /FU1 or /V1U1 can be selected • Amb. Temp.: –50* to 60°C
* –15°C when /HE is specified.
the type of protection (FM Intrinsically Safe • Process Temperature: 120°C max.
or FM Explosionproof) for use in hazardous [For Zone system]
locations. • Ex ia IIC T4, Ex nL IIC T4
Note 1. For the installation of this transmitter, • Ambient Temperature: –50* to 60°C
* –15°C when /HE is specified.
once a particular type of protection is
selected, any other type of protection • Max. Process Temp.: 120°C
cannot be used. The installation must be in • Enclosure: IP66/IP67
accordance with the description about the Note 2. Entity Parameters
type of protection in this instruction manual. • Intrinsically safe ratings are as follows:
Note 2. In order to avoid confusion, cross out Maximum Input Voltage (Vmax/Ui) = 30 V
unnecessary markings on the label other Maximum Input Current (Imax/Ii) = 200 mA
than the selected type of protection when Maximum Input Power (Pmax/Pi) = 0.9 W
the transmitter is installed. Maximum Internal Capacitance (Ci) = 10 nF
Maximum Internal Inductance (Li) = 0 µH
2.9.2 CSA Certification • Type “n” or Nonincendive ratings are as
follows:
a. CSA Intrinsically Safe Type Maximum Input Voltage (Vmax/Ui) = 30 V
Caution for CSA Intrinsically safe and Maximum Internal Capacitance (Ci) = 10 nF
nonincendive type. (Following contents refer to Maximum Internal Inductance (Li) = 0 µH
“DOC No. ICS013-A13”) • Installation Requirements
Uo ≤ Ui, Io ≤ Ii, Po ≤ Pi,
Note 1. EJX/EJA-E Series differential, gauge,
Co ≥ Ci + Ccable, Lo ≥ Li + Lcable
and absolute pressure transmitters with
Voc ≤ Vmax, Isc ≤ Imax,
optional code /CS1 are applicable for use
Ca ≥ Ci + Ccable, La ≥ Li + Lcable
in hazardous locations
Uo, Io, Po, Co, Lo, Voc, Isc, Ca and La are
parameters of barrier.
IM 01C25F01-01E
<2. Handling Cautions> 2-7
Note 3. Installation b. CSA Explosionproof Type
• In any safety barreir used output current
Caution for CSA explosionproof type.
must be limited by a resistor ‘R’ such that
Io=Uo/R or Isc=Voc/R. Note 1. EJX/EJA-E Series pressure transmitters
• The safety barrier must be CSA certified. with optional code /CF1 are applicable for
• Input voltage of the safety barrier must be use in hazardous locations:
less than 250 Vrms/Vdc. • Certificate: 2014354
• Installation should be in accordance with • Applicable Standard:
Canadian Electrical Code Part I and Local C22.2 No. 25
Electrical Code. C22.2 No. 30
• Dust-tight conduit seal must be used when CAN/CSA-C22.2 No. 94
installed in Class II and III environments. CAN/CSA-C22.2 No. 61010-1-12
• The instrument modification or parts CAN/CSA-C22.2 No. 61010-2-030-12
replacement by other than authorized CAN/CSA-C22.2 No. 60079-0:07
representative of Yokogawa Electric CAN/CSA-C22.2 No. 60079-1:07
Corporation and Yokogawa Corporation CAN/CSA-C22.2 No. 60529
of America is prohibited and will void ANSI/ISA-12.27.01
Canadian Standards Intrinsically safe and • Explosion-proof for Class I, Groups B, C and
nonincendive Certification. D.
[Intrinsically Safe] • Dustignition-proof for Class II/III, Groups E, F
Hazardous Location Nonhazardous Location and G.
Group IIC, Zone 0 • Enclosure: Type 4X
Class I, II, III, Division 1, • Temperature Code: T6...T4
Groups A, B, C, D, E, F, G General
Purpose • Ex d IIC T6...T4
Pressure Transmitters Safety Barrier Equipment • Enclosure: IP66/IP67
+ + + + • Maximum Process Temperature: 120°C (T4),
Supply – – – – 100°C (T5), 85°C (T6)
• Ambient Temperature: –50* to 75°C (T4),
F0204-1.ai
–50* to 80°C (T5), –50* to 75°C (T6)
* –15°C when /HE is specified.
[Nonincendive] • Supply Voltage: 42 V dc max.
Hazardous Location Nonhazardous Location 32 V dc max. (FOUNDATION Fieldbus and
Group IIC, Zone 2 PROFIBUS PA type)
Class I, II, Division 2,
CSA Certified 9 to 28 V dc, 27 mW (Low Power type)
Groups A, B, C, D, F, G
Class III, Division 1. Equipment • Output Signal: 4 to 20 mA dc
([nL] or
Pressure Transmitters nonincendive)
15 mA (FOUNDATION Fieldbus and
PROFIBUS PA type)
+ +
1 to 5 V (Low Power type)
Supply – –
Not Use
Safety Barrier
F0204-2.ai
IM 01C25F01-01E
<2. Handling Cautions> 2-8
Note 2. Wiring • Wiring connection for output signal code Q
• All wiring shall comply with Canadian (Low Power type) shall follow the diagram
Electrical Code Part I and Local Electrical below.
Codes. Pressure Transmitters
• In hazardous location, wiring shall be in SUPPLY +
conduit as shown in the figure. A
Voltmeter
Power Supply
• WARNING:
+ +
A SEAL SHALL BE INSTALLED WITHIN
45cm OF THE ENCLOSURE. – –
UN SCELLEMENT DOIT ÊTRE INSTALLÉ À SUPPLY –
MOINS DE 45cm DU BOÎTIER.
Three-Wire Connection
• WARNING:
WHEN INSTALLED IN CL.I, DIV 2, SEAL Pressure Transmitters
Note 3. Operation
42 V DC Max. Conduit
4 to 20 mA DC Sealing Fitting • WARNING:
Signal
Transmitter AFTER DE-ENERGIZING, DELAY 5
F0205-1.ai MINUTES BEFORE OPENING.
Non-Hazardous Hazardous Locations Division 2
APRÉS POWER-OFF, ATTENDRE 5
Locations MINUTES AVANT D'OUVRIR.
Non-hazardous • WARNING:
Location WHEN AMBIENT TEMPERATURE ≥ 65°C,
Equipment
USE THE HEAT-RESISTING CABLES ≥
90°C.
42 V DC Max. QUAND LA TEMPÉRATURE AMBIANTE
4 to 20 mA DC Sealing Fitting
Signal
≥ 65°C, UTILISEZ DES CÂBLES
Transmitter RÉSISTANTES Á LA CHALEUR ≥ 90°C.
F0205-2.ai
• Take care not to generate mechanical
• All wiring shall comply with local installation sparking when accessing to the instrument
requirements and local electrical code. and peripheral devices in a hazardous
• In hazardous locations, the cable entry location.
devices shall be of a certified flameproof Note 4. Maintenance and Repair
type, suitable for the conditions of use and • The instrument modification or parts
correctly installed. replacement by other than authorized
• Unused apertures shall be closed with representative of Yokogawa Electric
suitable flameproof certified blanking Corporation and Yokogawa Corporation of
elements. (The plug attached is flameproof America is prohibited and will void Canadian
certified.) Standards Explosionproof Certification.
IM 01C25F01-01E
<2. Handling Cautions> 2-9
c CSA Intrinsically Safe Type/CSA • Process Temperature (Tp.): 120°C max.
Explosionproof Type • Maximum Surface Temperature for EPL Db:
T85°C (Tp.: 80°C)
EJX/EJA-E Series pressure transmitters with
T100°C (Tp.: 100°C)
optional code /CU1 or /V1U1 can be selected
T120°C (Tp.: 120°C)
the type of protection (CSA Intrinsically Safe
• Enclosure: IP66 / IP67
or CSA Explosionproof) for use in hazardous
To satisfy IP66 or IP67, apply waterproof
locations.
glands to the electrical connection port.
Note 1. For the installation of this transmitter,
Note 2 Electrical Data
once a particular type of protection is
• In type of explosion protection intrinsic safety
selected, any other type of protection
Ex ia IIC or Ex ia IIIC, only for connection to a
cannot be used. The installation must be in
certified intrinsically safe circuit with following
accordance with the description about the
maximum values:
type of protection in this instruction manual.
Ui = 30 V
Note 2. For combined approval types, once a Ii = 200 mA
device of multiple approval type is installed, Pi = 0.9 W
it should not be re-installed using any (Linear Source)
other approval types. Apply a permanent Maximum internal capacitance; Ci = 27.6 nF
mark in the check box of the selected Maximum internal inductance; Li = 0 µH
approval type on the certification label on
Note 3. Installation
the transmitter to distinguish it from unused
• Refer to the control drawing. All wiring shall
approval types.
comply with local installation requirements.
2.9.3 ATEX Certification [Control Drawing]
Pressure Transmitters
a. ATEX Intrinsically Safe Ex ia + +
Supply Safety Barrier *1
Caution for ATEX Intrinsically safe type. – –
IM 01C25F01-01E
<2. Handling Cautions> 2-10
Note 5. Special Conditions for Safe Use • Ambient Temperature for gas-proof:
–50 to 75°C (T6), –50 to 80°C (T5), and
WARNING –50 to 75°C (T4)
• Process Temperature (Tp.) for gas-proof:
• When the enclosure of the Pressure –50 to 85°C (T6), –50 to 100°C (T5), and
Transmitter is made of aluminum, if it –50 to 120°C (T4)
is mounted in an area where the use of • Maximum Surface Temperature for dust-proof:
category 1G equipment is required, it must T85°C (Tamb.: –30* to 75°C, Tp.: –30* to
be installed such, that, even in the event of 85°C)
rare incidents, ignition sources due to impact * –15°C when /HE is specified.
and friction sparks are excluded.
Note 2. Electrical Data
• Electrostatic charges on the coated parts of
• Supply voltage: 42 V dc max.
Pressure Transmitter shall be avoided.
32 V dc max. (FOUNDATION Fieldbus and
• Electrostatic charge may cause an exlosion
PROFIBUS PA type)
hazard. Avoid any actions that cause the
9 to 28 V dc, 27 mW (Low Power type)
generation of electrostatic charge, such as
9 to 30 V dc, 250 mW (RS485 Modbus
rubbing with a dry cloth on coating face of
Communication Type)
the product.
• Output signal: 4 to 20 mA
• In case of the enclosure of the Pressure
15 mA (FOUNDATION Fieldbus and
Transmitter with paint layers, if it is mounted
PROFIBUS PA type)
in an area where the use of category 2D
1 to 5 V (Low Power type)
equipment is required, it shall be installed
RS485 Modbus (RS485 Modbus
in such a way that the risk from electrostatic
Communication Type)
discharges and propagating brush
discharges caused by rapid flow of dust is Note3. For combined approval types Once a
avoided. device of multiple approval type is installed,
it should not be re-installed using any other
approval types. Apply a permanent mark in
b. ATEX Flameproof Type the check box of the selected approval type
Caution for ATEX flameproof type. on the ertification label on the transmitter to
distinguish it from unused approval types.
Note 1. EJX/EJA-E Series pressure transmitters
with optional code /KF22 are applicable Note 4. Installation
for use in hazardous locations. For output • All wiring shall comply with local installation
signal code P and S, see IM 01C25W05- requirement.
01EN. • In order to prevent the earthing conductor
• No. KEMA 07ATEX0109 X from loosening, the conductor must be
• Applicable Standard: secured to the terminal, tightening the screw
EN IEC 60079-0 with appropriate torque. Care must be taken
EN 60079-1, EN 60079-31 not to twist the conductor.
• Type of Protection and Marking Code: • Cable glands, adapters and/or blanking
Ex db IIC T6...T4 Gb, Ex tb IIIC T85°C Db elements with a suitable IP rating shall
• Group: II be of Ex d IIC/Ex tb IIIC certified by ATEX
• Category: 2G, 2D and shall be installed so as to maintain the
• Enclosure: IP66 / IP67 specific degree of protection (IP Code) of the
• Temperature Class for gas-poof: equipment.
T6, T5, and T4
IM 01C25F01-01E
<2. Handling Cautions> 2-11
• Wiring connection for output signal code Q Note 7. Specific Conditions of Use
(Low Power type) shall follow the diagram
below. WARNING
Pressure Transmitters
• Electrostatic charge may cause an explosion
SUPPLY +
Voltmeter hazard. Avoid any actions that cause the
A Power Supply generation of electrostatic charge, such as
+ + rubbing with a dry cloth on coating face of
– – the product.
• In the case where the enclosure of the
SUPPLY –
Pressure Transmitter is made of aluminium,
Three-Wire Connection if it is mounted in an area where the use of
Pressure Transmitters category 2D apparatus is required, it shall
SUPPLY + be installed in such a way that the risk from
A
Voltmeter electrostatic discharges and propagating
Power Supply
brush discharges caused by rapid flow of
+ +
dust is avoided.
– – • The flame paths differ from the standard
SUPPLY – values in EN 60079-1. Repair of the
equipment is only allowed when done
Four-Wire Connection
F0213.ai by the manufacturer or an authorised
representative.
Note 5. Operation • The fasteners used to fasten the transmitter
• Keep the “WARNING” label attached to the enclosure onto the sensor capsule is special
transmitter. fastener, and the property class of it is
WARNING: AFTER DE-ENERGIZING, A2-50(A4-50) or more.
DELAY 5 MINUTES BEFORE OPENING. • For transmitters with a membrane made of
WHEN THE AMBIENT TEMP.≥65°C, USE titanium, ignition hazard due to impact and
HEAT-RESISTING CABLE AND CABLE friction on the membranes shall be avoided.
GLAND ≥90°C. • Maximum Surface Temperature for dust-proof:
• Take care not to generate mechanical T85°C (Tamb.: –30* to 75°C, Tp.: –30* to 85°C)
sparking when accessing to the instrument * –15°C when /HE is specified.
and peripheral devices in a hazardous
location.
c. ATEX Intrinsically Safe Type/ATEX
Note 6. Maintenance and Repair Flameproof Type
• Warning:When maintenance and repair are
performed, confirm the following conditions EJX/EJA-E Series pressure transmitters with
and the then perform works. optional code /KU22 or /V1U1 can be selected
Confirm the power supply is cut off and the type of protection ATEX Flameproof,
the voltage of power supply terminal is not Intrinsically Safe. Ex ia, or Ex ic for use in
supplied. hazardous area.
• Only personnel authorized by Yokogawa Note 1. For the installation of this transmitter,
Electric Corporation can repair the once a particular type of protection is
equipment in accordance with the relevant selected, any other type of protection
standards: IEC / EN 60079-19 (Equipment cannot be used. The installation must be in
repair, overhaul and reclamation) and accordance with the description about the
IEC / EN 60079-17 (Electrical installation type of protection in this user’s manual.
inspection and maintenance); otherwise the
certification will be voided.
IM 01C25F01-01E
<2. Handling Cautions> 2-12
Note 2. For combined approval types Once a Note 4. Specific Conditions of Use
device of multiple approval type is installed,
it should not be re-installed using any WARNING
other approval types. Apply a permanent
mark in the check box of the selected • Electrostatic charge may cause an explosion
approval type on the certification label on hazard. Avoid any actions that cause the
the transmitter to distinguish it from unused generation of electrostatic charge, such as
approval types. rubbing with a dry cloth on coating face of
the product.
● ATEX Intrinsically Safe Ex ic • When the lightning protector option is
Caution for ATEX intrinsically safe Ex ic specified, the apparatus is not capable
• Applicable Standard: of withstanding the 500V insulation test
EN 60079-0:2012+A11:2013 required by EN60079-11. This must be taken
EN 60079-11:2012 into account when installing the apparatus.
• Type of Protection and Marking Code:
II 3G Ex ic IIC T4 Gc
(2) Electrical Connection
• Ambient Temperature: –30* to +60°C
* –15°C when /HE is specified. A mark indicating the electrical connection type
• Ambient Humidity: is stamped near the electrical connection port.
0 to 100% (No condensation) These marks are as followed.
• Maximum Process Temperature: 120°C
• IP Code: IP66 Screw Size Marking
• Ambient pollution degree: 2 ISO M20 × 1.5 female M
• Overvoltage category: I ANSI 1/2 NPT female N or W
Note 1. Electrical Data
Ui = 30 V
Ci = 27.6 nF
Li = 0 µH
Note 2. Installation Location of the mark
• All wiring shall comply with local installation
F0208.ai
requirements. (refer to the control drawing)
• Cable glands, adapters and/or blanking
(3) Installation
elements shall be of Ex “n”, Ex “e” or Ex “d”
and shall be installed so as to maintain the
specified degree of protection (IP Code) of WARNING
the transmitters.
• All wiring shall comply with local installation
Note 3. Maintenance and Repair requirements and the local electrical code.
• The instrument modification or parts • There is no need for conduit seal in Division
replacement by other than authorized 1 and Division 2 hazardous locations
representative of Yokogawa Electric because this product is sealed at the factory.
Corporation is prohibited and will void ATEX
intrinsically safe.
[Control drawing] (4) Operation
Hazardous Area Nonhazardous Area
WARNING
+
Pressure Associated
Transmitters – Apparatus • OPEN CIRCUIT BEFORE REMOVING
COVER. INSTALL IN ACCORDANCE WITH
THIS USER’S MANUAL
F0207.ai
• Take care not to generate mechanical
sparking when access to the instrument and
peripheral devices in a hazardous location.
IM 01C25F01-01E
<2. Handling Cautions> 2-13
(5) Maintenance and Repair MODEL: Specified model code.
STYLE: Style code.
SUFFIX: Specified suffix code.
WARNING
SUPPLY: Supply voltage.
The instrument modification or parts replacement OUTPUT: Output signal.
by other than an authorized Representative of MWP: Maximum working pressure.
Yokogawa Electric Corporation is prohibited and CAL RNG: Specified calibration range.
will void the certification. NO.: Serial number and year of production*1.
TOKYO 180-8750 JAPAN:
The manufacturer name and the address*2.
(6) Name Plate *1: The first digit in the three numbers next to the nine
letters of the serial number appearing after “NO.”
Name plate on the nameplate indicates the year of production.
The following is an example of a serial number for a
product that was produced in 2010:
91K819857 032
75 °C
2-9-32 Nakacho, Musashino-shi, Tokyo Japan
Ex tb IIIC T85°C Db
T85°C(Tamb.:-30(-15) TO 75°C, Tp.:-30(-15) TO 85°C) *3: The identification number of Notified Body.
F0209.ai
IM 01C25F01-01E
<2. Handling Cautions> 2-14
a. IECEx Intrinsically Safe Ex ia Note 4. Specific Condition of Use
Caution for IECEx Intrinsically safe Ex ia.
WARNING
Note 1. EJX/EJA-E series pressure transmitters
with optional code /SU21 are applicable for • Electrostatic charge may cause an explosion
use in hazardous locations hazard. Avoid any actions that cause the
• No. IECEx DEK 11.0081X generation of electrostatic charge, such as
• Applicable Standard: rubbing with a dry cloth on coating face of
IEC 60079-0:2011, IEC 60079-11:2011 the product.
• Ex ia IIC T4 Ga • When the enclosure of the pressure
• Ambient Temperature: –50 to 60°C transmitter is made of aluminum, if it is
• Max. Process Temp.: 120°C mounted in an area where the use of
• Enclosure: IP66/IP67 EPL Ga equipment is required, it must be
To satisfy IP66 or IP67, apply waterproof installed such, that, even in the event of rare
glands to the electrical connection port. incidents, ignition sources due to impact and
friction sparks are excluded.
Note 2. Electrical Data
• Electrostatic charges on the coated parts of
Maximum Input Voltage (Ui) = 30 V
Pressure Transmitter shall be avoided.
Maximum Input Current (Ii) = 200 mA
Maximum Input Power (Pi) = 0.9 W
(linear source) b. IECEx Intrinsically Safe Ex ic
Maximum Internal Capacitance (Ci) = 27.6 nF
Caution for IECEx Intrinsically safe Ex ic.
Maximum Internal Inductance (Li) = 0 μH
Note 1. EJX/EJA-E series pressure transmitters
When the lightning protector option is specified,
with optional code /SU21 are applicable for
the apparatus is not capable of withstanding the
use in hazardous locations
500V insulation test required by IEC60079-11.
• No. IECEx DEK 13.0061X
This must be taken into account when installing
• Applicable Standard: IEC 60079-0:2011,
the apparatus.
IEC 60079-11:2011
Note 3. Installation • Ex ic IIC T4 Gc
• In any safety barrier used output current • Ambient Temperature: –30* to 60°C
must be limited by a resistor ‘R’ such that * -15 °C when /HE is specified.
Io=Uz/R. • Max. Process Temp.: 120°C
• The safety barrier must be IECEx certified. • IP Code: IP66
• Input voltage of the safety barrier must be • Overvoltage Category: I
less than 250 Vrms/Vdc. Note 2. Electrical Data
• The instrument modification or parts Maximum Input Voltage (Ui) = 30 V
replacement by other than authorized Maximum Internal Capacitance (Ci) = 27.6 nF
representative of Yokogawa Electric Maximum Internal Inductance (Li) = 0 μH
Corporation is prohibited and will void IECEx
certification. Note 3. Installation
• The pressure transmitter is allowed to
[Ex ia]
Hazardous Location Nonhazardous Location
be installed in “nL” systems, on condition
Group IIC, Zone 0 that the output parameters of “nL” source
(associated energy-limited apparatus)
EJX/EJA-E Series IECEx certified are suitable to the above mentioned input
Pressure Transmitters Safety Barrier
+ +
parameters of the pressure transmitter and
the cable parameters.
Supply – –
• Cable glands, adapters and/or blanking
elements shall be of Ex “n”, Ex “e” or Ex
(*1)
“d” and shall be installed so as to maintain
*1: When using non isolation barrier,
connect (*1) to IS barrier system.
the specified degree of protection of the
F0215.ai
equipment.
IM 01C25F01-01E
<2. Handling Cautions> 2-15
• The instrument modification or parts Note 2. Wiring
replacement by other than authorized • In hazardous locations, the cable entry
representative of Yokogawa Electric devices shall be of a certified flameproof
Corporation is prohibited and will void IECEx type, suitable for the conditions of use and
certification. correctly installed.
[Ex ic] • Unused apertures shall be closed with
Hazardous Location Nonhazardous Location suitable flameproof certified blanking
elements.
EJX/EJA-E Series Associated apparatus
Pressure Transmitters
• Wiring connection for output signal code Q
(Low Power type) shall follow the diagram
+ +
Supply below.
– –
Pressure Transmitters
SUPPLY +
F0216.ai
Voltmeter
A Power Supply
Note 4. Specific Condition of Use + +
WARNING – –
SUPPLY –
• Electrostatic charge may cause an explosion
Three-Wire Connection
hazard. Avoid any actions that cause the
Pressure Transmitters
generation of electrostatic charge, such as
rubbing with a dry cloth on coating face of SUPPLY +
Voltmeter
the product. A Power Supply
• The apparatus is not capable of dielectric + +
strength tests required by IEC 60079-11.
– –
This must be taken into account when
installing the apparatus. SUPPLY –
Four-Wire Connection
F0214.ai
IM 01C25F01-01E
<2. Handling Cautions> 2-16
Note 4. Maintenance and Repair 2.11 Pressure Equipment
• The instrument modification or parts
replacement by other than authorized
Directive (PED)
representative of Yokogawa Electric
(1) General
Corporation is prohibited and will void IECEx
Certification. • EJX/EJA-E Series pressure transmitters are
• Electrical Connection categorized as piping under the pressure
A mark indicating the electrical connection accessories section of directive 2014/68/EU,
type is stamped near the electrical which corresponds to Article 4, Paragraph 3 of
connection port. These marks are as PED, denoted as Sound Engineering Practice
followed. (SEP).
• EJ510-D, EJ530-D, EJX610A-D,
Screw Size Marking
and EJX630A-D can be used above 200
ISO M20 × 1.5 female M bar and therefore considered as a part of a
ANSI 1/2 NPT female N or W pressure retaining vessel where category III,
Module H applies. These models with option
code /PE3 conform to that category.
(2) Technical Data
• Models without /PE3
Location of the mark
Article 4, Paragraph 3 of PED, denoted as
F0208.ai
Sound Engineering Practice (SEP).
• Models with /PE3
Module: H
2.10 EMC Conformity Standards Type of Equipment: Pressure Accessory-Vessel
Type of fluid: Liquid and Gas
EN 61326-1 Class A, Table2
Group of fluid: 1 and 2
EN 61326-2-3
EN 61326-2-5 (for Fieldbus) Model
Capsule PS*1
V(L)
PS.V
Category*2
Immunity influence during the test code (bar) (bar.L)
A, B, C 100 0.1 10 Article 4,
Differential pressure / Pressure: Output shift is EJ510
Paragraph 3
specified within ±1% of 1/20 Max span. EJX610A D 700 0.1 70 (SEP)
Static pressure: Output shift is specified within EJ510,
±2% of 1 MPa span. EJX610A
D 700 0.1 70 III
with code /
Status Output Line*: Continues to operate
PE3
without reversal. Article 4,
*: Only for /AL option. EJ530, A, B, C 100 0.1 10
Paragraph 3
Condition for EMC test for FOUNDATION fieldbus EJX630A D 700 0.1 70 (SEP)
type: The shield of the cable and the case EJ530,
are connected with a capacitor of 10 nF. EJX630A
D 700 0.1 70 III
with code /
PE3
CAUTION *1: PS is maximum pressure for vessel itself based on
Pressure Equipment Directive 2014/68/EU. Refer to
To meet EMC regulations, Yokogawa General Specification for maximum working pressure of a
transmitter.
recommends that customers run signal wiring *2: Referred to Table 1 covered by ANNEX II of EC Directive
through metal conduits or use shielded twisted- on Pressure Equipment Directive 2014/68/EU.
pair cabling when installing EJX/EJA-E series
transmitters in a plant.
This equipment is a Class A product, and it is
designed for use in the industrial environment.
Please use this instrument in the industrial
environment only.
IM 01C25F01-01E
<2. Handling Cautions> 2-17
(3) Operation 2.13 Safety Requirement
Standards
CAUTION
Applicable standard: EN 61010-1, C22.2 No.61010-1
• The temperature and pressure of fluid should
(1) Pollution Degree 2
be maintained at levels that are consistent
with normal operating conditions. “Pollution degree” describes the degree to
• The ambient temperature should be which a solid, liquid, or gas which deteriorates
maintained at a level that is consistent with dielectric strength or surface resistivity is
normal operating conditions. adhering. “ 2 ” applies to normal indoor
• Please take care to prevent water hammer atmosphere. Normally, only non-conductive
and the like from inducing excessive pollution occurs. Occasionally, however,
pressures in pipes and valves. If phenomena temporary conductivity caused by condensation
are likely, install a safety valve or take must be expected.
some other appropriate measure to prevent (2) Installation Category I
pressure from exceeding PS.
• Take appropriate measures at the device or “Overvoltage category (Installation category)”
system level to protect transmitters if they describes a number which defines a transient
are to be operated near an external heat overvoltage condition. It implies the regulattion
source. for impulse withstand voltage. “ I ” applies to
electrical equipment which is supplied from the
circuit when appropriate transient overvoltage
control means (interfaces) are provided.
2.12 EU RoHS Directive
(3) Indoor/Outdoor use
Applicable standard: EN 50581
Applicable production sites are shown below. It can be used in indoors and outdoors.
The condition of the RoHS compliant production (4) Altitude of installation site
sites are as follows:
Japan, USA, Germany, Bahrain, India Max. 5,000 m above sea level
IM 01C25F01-01E
<3. Component Names> 3-1
3. Component Names
External indicator
conduit connection (Note 1)
Conduit
connection
(Note 2) Zero-
Push button (Note 1) Slide switch adjustment
(See section 7.5) screw
CPU assembly
Integral
indicator (Note 1)
Burnout direction switch
Mounting screw
BO H L
Amplifier Cover WR E D
Transmitter section
NO YES
Burnout Direction HIGH LOW Write Protection
(Write enabled) (Write disabled)
F0301.ai
IM 01C25F01-01E
<4. Installation> 4-1
4. Installation
4.1 Precautions Vertical pipe mounting
IMPORTANT
• When welding piping during construction,
take care not to allow welding currents to
Mounting bracket
flow through the transmitter. U-bolt (L)
• Do not step on this instrument after U-bolt (S)
installation.
• For the EJ530 and EJX630A whose
U-bolt nut (L)
capsule code is A, B or C, the pipe of the Horizontal pipe mounting
atmospheric opening is located on the
pressure detecting section. The opening Mounting bracket
must not face upward. See subsection 5.1.1.
• D capsule of EJ530 and EJX630A is
of sealed gauge reference and the change 50 mm (2-inch) pipe
in atomospheric pressure may affect the
measurement.
to damage the threads when removing these Figure 4.1 Transmitter Mounting
caps. Do not insert a screw driver or other
tool between the cap and the port threads to
remove the cap.)
■ The transmitter can be mounted on a nominal
50 mm (2-inch) pipe using the mounting bracket
supplied, as shown in Figure 4.1.
■ The user should prepare the mating gasket for
the transmitters with Process connection code
8 and 9. See Figure 4.2.
Gasket
F0402.ai
IM 01C25F01-01E
<4. Installation> 4-2
IMPORTANT IMPORTANT
Tighten the hexagonal nut part of the capsule Do not rotate the transmitter section more than
assembly. See Figure 4.3. the above limit.
Transmitter section
Capsule assembly
Setscrew
Pressure-detector section
F0403.ai
Stopper
F0404.ai
IM 01C25F01-01E
<5. Installing Impulse Piping> 5-1
downwards for all the models. Figure 5.2 Process Pressure Tap Angle
(For Horizontal Piping)
The pipe (open to atmosphere) is positioned horizontal.
IM 01C25F01-01E
<5. Installing Impulse Piping> 5-2
(3) Impulse Piping Slope Tap valve
The impulse piping must be routed with only an
upward or downward slope. Even for horizontal Union or flange
routing, the impulse piping should have a slope of
at least 1/10 to prevent condensate (or gases) from
accumulating in the pipes. Stop valve
IM 01C25F01-01E
<6. Wiring> 6-1
6. Wiring
6.1 Wiring Precautions 6.3 Connections of External
IMPORTANT Wiring to Terminal Box
• Lay wiring as far as possible from electrical ● Terminal Configuration
noise sources such as large capacity
transformers, motors, and power supplies.
• Remove the electrical connection dust cap
before wiring.
• All threaded parts must be treated with
waterproofing sealant. (A non-hardening
silicone group sealant is recommended.)
• To prevent noise pickup, do not pass signal
and power cables through the same ducts. Terminal 1 Terminal 3
Materials VOUT +
–
3
2
1 to 5 V DC with HART communication
terminals
IM 01C25F01-01E
<6. Wiring> 6-2
6.3.1 Power Supply Wiring Connection Connect the BT200 or HART Communicator to the
SUPPLY + and – terminals. (Use hooks.)
IMPORTANT Transmitter terminal box Power supply
Connecting with the commercial AC power +
supply will damage the device. Be sure to use –
the DC power supply in the predetermined Ignore the polarity since the
range. BT200 is AC-coupled to the
terminal box.
BT200 F0603.ai
Connect the power supply wiring to the SUPPLY +
Figure 6.4 BT200 Connection
and – terminals. When /AL is specified, also refer to
subsection 6.3.5.
■ 1 to 5 V output, HART
Transmitter terminal box Connect the HART communicator or configuration
+ tool to the SUPPLY - and VOUT (+) terminals. (Use
Power supply
hooks.)
–
Load resistance is not necessary
Power supply Transmitter terminal box Voltmeter
for 1 to 5 V output.
F0601.ai + +
Figure 6.2 Power Supply Wiring Connection – USB –
FieldMate Modem
F0604.ai
IM 01C25F01-01E
<6. Wiring> 6-3
6.3.5 Status Output Connection (2) 4 to 20 mA output, Intrinsically Safe Type
When option code /AL is specified, connect the With the intrinsically safe type, a safety barrier must
external wiring as shown in Figure 6.5. be included in the loop.
To configure and activate the process alarm Hazardous Location Nonhazardous Location
function and status output, it is necessary to set
Transmitter terminal box
some parameters. Refer to each communication Distributor
manual for procedures. (Power supply unit)
Transmitter
24V DC
terminal box Shielded cable Receiver
+ instrument
Distributor
– 250Ω
Receiver
instrument
Receiver
instrument
F0606.ai
IM 01C25F01-01E
<6. Wiring> 6-4
■ Four wire connection (2) Flameproof Type
Fasten the negative side wiring of both power
Wire cables through a flameproof packing adapter,
supply and signal line to the SUPPLY - terminal.
or use a flameproof metal conduit.
Hazardous Location Nonhazardous Location
■ Wiring cable through flameproof packing
Transmitter terminal box adapter.
Distributor
(Power supply unit) • Apply a non-hardening sealant to the terminal
box connection port and to the threads on the
flameproof packing adapter for waterproofing.
Flameproof packing
adapter
(1) General-use Type and Intrinsically Safe ■ Flameproof metal conduit wiring
Type • A seal fitting must be installed near the terminal
box connection port for a sealed construction.
With the cable wiring, use a metallic conduit or
• Apply a non-hardening sealant to the threads of
waterproof glands.
the terminal box connection port, flexible metal
• Apply a non-hardening sealant to the terminal conduit and seal fitting for waterproofing.
box connection port and to the threads on the
Gas sealing device
flexible metal conduit for waterproofing. Non-hazardous area
Flameproof flexible
metal conduit
Hazardous area
Flexible metal conduit Apply a non-hardening
Flameproof
Apply a non-hardening heavy-gauge sealant to the threads of
Wiring metal steel conduit these fittings for
conduit sealant to the threads for
waterproofing. waterproofing
IM 01C25F01-01E
<6. Wiring> 6-5
6.5 Grounding
Grounding is always required for the proper
operation of transmitters. Follow the domestic
electrical requirements as regulated in each
country. For a transmitter with a built-in lightning
protector, grounding should satisfy ground
resistance of 10Ω or less.
Ground terminals are located on the inside and
outside of the terminal box. Either of these terminals
may be used.
Ground terminal
(inside)
Ground terminal
(outside)
F0611.ai
600
External E–10.5
R= Communication
load 0.0244
applicable range
resistance BRAIN and HART
R (Ω)
250
IM 01C25F01-01E
<7. Operation> 7-1
7. Operation
7.1 Preparation for Starting
Operation
This section describes the operation procedure for
Tap valve
the EJ530 as shown in figure 7.1.
Vent plug (Fill plug)
NOTE Union or flange
the impulse piping, transmitter, or other Figure 7.1 Liquid Flow Measurement
components. (Gauge Pressure Transmitters)
IM 01C25F01-01E
<7. Operation> 7-2
■ Confirming that Transmitter is Operating Using the integral indicator
Properly
• If the wiring system is faulty, the display stays
Using the BT200 blank.
• If the transmitter is faulty, an error code is
IMPORTANT displayed.
IM 01C25F01-01E
<7. Operation> 7-3
7.2 Zero Point Adjustment To check the output signal, use a digital multimeter,
calibrator, or communicator.
After completing preparations for operating the
transmitter, adjust the zero point.
Zero point adjustment can be done by turning the
transmitter’s zero-adjustment screw or by using
the communicator. This section describes the
procedure for the zero-adjustment screw. For the
Zero-adjustment
communicator procedure, see the communication screw cover
manual. F0704.ai
130–50
Actual measured value= x100=40.0%
250–50
(=10.4mA)
IM 01C25F01-01E
<7. Operation> 7-4
7.3 Starting Operation 7.4 Shutting Down the
After completing the zero point adjustment, follow Transmitter
the procedures below to start operation. Steps Shut down the transmitter as follows.
1) and 2) are specific to the differential pressure Steps 2) and 3) are specific to the differential
transmitters. pressure transmitters.
1) Confirm the operating status. If the output 1) Turn off the power.
signal exhibits wide fluctuations (hunting) due to 2) Close the stop valve.
periodic variation in the process pressure, use 3) Open the equalizing valve.
the communicator to dampen the transmitter 4) Close the high pressure stop valve.
output signal. Confirm the hunting using a 5) Close the tap valves.
receiving instrument or the integral indicator,
and set the optimum damping time constant.
2) After confirming the operating status, perform
NOTE
the following. • Whenever shutting down the transmitter for a
long period, remove any process fluid that is
IMPORTANT in the transmitter pressure-detector section.
• Remove the communicator from the terminal • The equalizing valve must be left OPEN.
box, and confirm that none of the terminal
screws are loose.
• Close the terminal box cover and the
amplifier cover. Screw each cover in tightly
until it will not turn further.
• There are two covers that must be locked
on the ATEX Flameproof type transmitters.
An Allen head bolt (shrouding bolt) under
the edge of each cover is used to lock the
cover. When the shrouding bolt is driven
counterclockwise with an Allen wrench, the
bolt rotates upward and locks the cover. (See
section 8.4.) After locking the covers, confirm
that they are secure and cannot be opened
by hand.
Tighten the zero-adjustment cover mounting
screw to secure the cover.
• Tighten the zero-adjustment cover mounting
screw to secure the cover.
IM 01C25F01-01E
<7. Operation> 7-5
7.5 Local Parameter Setting 7.5.1 Local Parameter Setting (LPS)
Overview
WARNING Parameter configuration by the zero-adjustment
screw and push button (integral indicator code
The local push button on the integral indicator E) offers easy and quick setup for parameters of
must not be used in a hazardous area. When Loop test, Tag number, Unit, LRV, URV, Damping,
it is necessary to use the push button, operate Output mode (linear/square root), Display out
it in a non- hazardous location. In the case of 1, and Re-range by applying actual pressure
(LRV/URV) and Device Information. There is no
the explosion-proof/flameproof type transmitter,
effect on measurement signal (analog output or
please refer to section 2.9 for each product.
communication signal) when Local Parameter
Setting is carried out.
IMPORTANT
• Do not turn off the power to the transmitter
immediately after performing parameter
setting. Powering off within 30 seconds of
performing this procedure will return the
zero-adjustment
parameter to its previous setting. screw cover
• The parameters of Ext SW for HART
F0705.ai
or J55:EXT ZERO ADJ for BRAIN, to
enable or inhibit zero point adjustment Figure 7.5 Zero-adjustment Screw
by means of the zero-adjustment screw
on the transmitter must be “Enabled” to
Integral indicator
perform this configuration. Please refer to
either IM 01C25T01-06EN for the HART
communication type, or IM 01C25T03-01E
for the BRAIN communication type for the
setting procedure.
• The Local Parameter Setting function
Push-button
is available with HART or BRAIN F0706.ai
communication type.
Figure 7.6 Range –Setting Switch (push button)
LCD update will be slower at low ambient
temperature, and it is recommended to use
LPS function at temperatures above -10
degrees C.
IM 01C25F01-01E
<7. Operation> 7-6
screw
Process
Measurement Zero adjustment
Display push
Activate LPS mode
push
***
1. Loop Test Select Output Current Run/Cancel
*
2. Tag Number Edit Tag number Save/Cancel the value
push *
3. Press Unit Select Press unit Save/Cancel the value
*
4. Press LRV Edit Press LRV Save/Cancel the value
push *
5. Press URV Edit Press URV Save/Cancel the value
*
6. Damping Time Edit Damping time Save/Cancel the value
push *
7. Output Mode Select Output mode Save/Cancel the value
*
8. Display Out1 Edit Display Out1 Save/Cancel the value
push
9. LRV-Apply Press Set LRV Save/Cancel the value
Process
Measurement
Display
F0707.ai
*: These parameter configurations are available with the software revision (SOFT REV)2.03 or later.
Software revision can be checked via a field communicator (HART/BRAIN) or DTM. Please refer to IM 01C25T01 for HART
parameter “Software rev” and IM 01C25T03 for BRAIN “SOFT REV.”
**: This paratmeter configuration is available with the softeware revision (SOFT REV) 3.01 or later.
***: This paratmeter configuration is available with the softeware revision (SOFT REV) 5.01 or later.
IM 01C25F01-01E
<7. Operation> 7-7
7.5.2 Activating Local Parameter Setting
Press the push button on the integral indicator to activate the Local Parameter Setting mode. The transmitter
will exit automatically from the Local Parameter Setting mode if no operation is carried out for 10 minutes.
1. Loop Test
push
2. Tag Number
push
8. Display Out1
push
*
3. Press Unit
push
9. LRV-Apply Press
push
4. Press LRV
push
5. Press URV
push
6. Damping Time
push
Process
push
Measurement
Display
F0708.ai
*: [Software revision: 2.03] Up to 6 characters are shown in the bottom line. To review after the 7th character, turn the zero-adjustment
screw and press the push button six times or more.
[Software revision: 3.01 or later] The display automatically scrolls to show all the characters.
To configure each parameter value, turn the zero-adjustment screw on each parameter screen after activating
the Local Parameter Setting mode.
To cancel the Local Parameter Setting configuration, please refer to 7.5.13 Save or Cancel and 7.5.14 Abort
Configuration.
IM 01C25F01-01E
<7. Operation> 7-8
7.5.4 Loop Test Configuration
Loop test configuration can be changed as below. Output current value (4 mA, 12 mA or 20 mA) for Loop test
can be selected by turning the zero-adjustment screw.
Run ?/
Cancel ?
Blinking Blinking
[Available loop test]
Select by the push button
4mA: 0% output
12mA: 50% output
20mA: 100% output
Save ?/
Cancel ?
Blinking Blinking
Set all other
characters in the
Go to the next Character same way
Change the first Character
screw
push
F0709.ai
Save ?/
Cancel ?
Blinking Blinking
[Available pressure units]
Select by the push button
kPa bar inH2O@4degC(39.2degF)
Torr mbar inH2O@20degC(68degF)
atm g/cm2 inHg
MPa kg/cm2 ftH2O@4degC(39.2degF)
screw hPa Pa ftH2O@20degC(68degF)
push mmHg mmH2O@4degC(39.2degF)
psi mmH2O@20degC(68degF)
In addition to the above units, mmAq@4degC,
mmAq@20degC, mmWG@4degC and mmWG@20degC
are available for BRAIN communication type.
F0710.ai
IM 01C25F01-01E
<7. Operation> 7-9
7.5.7 Pressure LRV/URV Configuration
Pressure LRV and URV can be set. The number for each digit is changed by turning the zero-adjustment screw
and set by pressing the push button. Please refer to 7.5.8 Damping Time Constant Configuration for how to
change the numerical value.
When the setting is out of the limit, an alarm will be generated.
Save ?/
Cancel ?
push
F0711.ai
IM 01C25F01-01E
<7. Operation> 7-10
7.5.11 Re-range by applying actual Note 1: Wait until the pressure inside the pressure-detector
section has stabilized before proceeding to the next
pressure (LRV/URV). step.
Note 2: If the pressure applied to the transmitter exceeds the
This feature allows the lower and upper range previous LRV (or URV), the integral indicator may
values to be setup with the actual input applied. display error number “AL.30” (In this case, the output
signal percent and “AL.30” are displayed alternately
every two seconds). Although “AL.30” is displayed,
you may proceed to the next step. However, should
any other error number be displayed, take the
appropriate measure in reference to , “Errors and
Countermeasures” in each communication manual.
Note 3 : Changing the lower range value (LRV) also
automatically changes the upper range value (URV),
F0712.ai keeping the span constant. New URV=previous
URV+(new LRV–previous LRV)
Follow the procedure below to change the LRV and
URV settings.
7.5.12 Device Information Display
[Example]
Model name, communication protocol, device
Rerange LRV to 0 and URV to 3 MPa. revision and software revision are displayed
repeatedly.
1) Connect the transmitter and apparatus as
shown in Figure 8.1 and warm it up for at least
7.5.13 Save or Cancel
five minutes.
2) Press the push-button. The integral indicator At the end of each parameter setting, select “Save”
then displays “LRV.SET.” or “Cancel” by the zero-adjustment screw and press
3) Apply a pressure of 0 kPa (atmospheric the push button to save or cancel the configuration.
pressure) to the transmitter. (Note 1)
4) Turn the zero-adjustment screw in the desired Save or Cancel
IM 01C25F01-01E
<7. Operation> 7-11
7.5.14 Abort Configuration 7.5.15 Local Parameter Setting Lock
To disable parameter changes by the Local
7.5.14.1 Abort Configuration (Menu)
Parameter Setting there are three different ways.
Hold down the push button for over 2 seconds to Locked features
exit the Local Parameter Setting mode. Communication Parameter • External Zero
Ext SW =disable Adjustment
Process Measurement Display (EXT ZERO ADJ = disable) • Local Parameter Setting
Communication Parameter • Local Parameter Setting
Write Protect = On • All Communication
1. Loop Test (WRT PROTECT = Yes) Parameters *
Hardware write protection • Local Parameter Setting
2. Tag Number switch on CPU assembly = • All Communication
D (Disable) Parameters *
3. Press Unit *External Zero Adjustment is unlocked.
5. Press URV
procedure.
: Reviewing local parameter setting by push button
on the integral indicator is available at any time
even when the Local Parameter Setting is locked.
7.5.16 Others
: • Difference between BRAIN and HART
11. Device Information Proccess Value HART BRAIN
Up to 8 Up to 16
Tag Number characters can characters can
Process Measurement Display be set be set
F0714.ai
“TRNS.FC” “OUT.MOD”
Output Mode
shown on the shown on the
7.5.14.2 Abort Configuration (Parameter) (Linear/Sq root)
integral indicator integral indicator
To exit the configuration while editing the value,
• The degree of adjustment depends on the
hold down the button for over 2 seconds and select
speed of turning the adjustment screw. Turn the
“Save” or “Cancel.”
screw slowly for fine tuning and turn the screw
fast for coarse tuning.
IM 01C25F01-01E
<8. Maintenance> 8-1
8. Maintenance
8.1 Overview 8.3 Calibration
Use the procedure below to check instrument
WARNING operation and accuracy during periodic
maintenance or troubleshooting.
Since the accumulated process fluid may be
toxic or otherwise harmful, take appropriate care 1) Connect the instruments as shown in figure 8.1
to avoid contact with the body or inhalation of and warm up the instruments for at least ten
vapors when draining condensate or venting gas minutes.
from the transmitter pressure-detector section
and even after dismounting the instrument from IMPORTANT
the process line for maintenance.
• To adjust the transmitter for highest
accuracy, make adjustments with the
Maintenance of the transmitter is easy due to its power supply voltage and load resistance
modular construction. This chapter describes the including leadwire resistances set close to
procedures for calibration, adjustment, and the the conditions under which the transmitter is
disassembly and reassembly procedures required installed.
for component replacement. • If the measurement range 0% point is
Transmitters are precision instruments. Please 0 kPa or shifted in the positive direction
carefully and thoroughly read the following sections (suppressed zero), the reference pressure
for information on how to properly handle them should be applied as shown in the figure.
while performing maintenance. If the measurement range 0% point is shifted
in the negative direction (elevated zero), the
IMPORTANT reference pressure should be applied using
a vacuum pump.
• As a rule, maintenance of this transmitter
should be done in a shop that has all the 2) Apply reference pressures of 0%, 50%,
necessary tools. and 100% of the measurement range to the
• The CPU assembly contains sensitive parts transmitter. Calculate the errors (differences
that can be damaged by static electricity. between digital voltmeter readings and
Take precautions such as using a grounded reference pressures) as the pressure is
wrist strap when handling electronic parts or increased from 0% to 100% and is decreased
touching the board circuit patterns. Also be from 100% to 0%, and confirm that the errors
sure to place the removed CPU assembly are within the required accuracy.
into a bag with an antistatic coating.
IM 01C25F01-01E
<8. Maintenance> 8-2
Table 8.1 Instruments Required for Calibration
Name Yokogawa-recommended Instrument Remarks
Power supply Model SDBT or SDBS distributor 4 to 20 mA DC signal
Load resistor Model 2792 standard resistor [250 Ω ±0.005%, 3 W]
Load adjustment resistor [100 Ω ±1%, 1 W]
Voltmeter Model 2501 A digital multimeter
Accuracy (10V DC range): ±(0.002% of rdg + 1 dgt)
Digital Model MT220 precision digital manometer Select a manometer having
manometer 1) For 10 kPa class a pressure range close to
Accuracy: ±(0.015% of rdg + 0.015% of F.S.) . . . . for 0 to 10 kPa that of the transmitter.
±(0.2% of rdg + 0.1% of F.S.) . . . . . . . . for -10 to 0 kPa
2) For 130 kPa class
Accuracy: ±0.02% of rdg . . . . . . . . . . . . . . . . . . . . for 25 to 130 kPa
±5digits . . . . . . . . . . . . . . . . . . . . . . . . . for 0 to 25 kPa
±(0.2% of rdg + 0.1% of F.S.) . . . . . . . . for -80 to 0 kPa
3) For 700 kPa class
Accuracy: ±(0.02% of rdg + 3digits) . . . . . . . . . . . . for 100 to 700 kPa
±5 digits . . . . . . . . . . . . . . . . . . . . . . . . . for 0 to 100 kPa
±(0.2% of rdg + 0.1% of F.S.) . . . . . . . . for -80 to 0 kPa
4) For 3000 kPa class
Accuracy: ±(0.02% of rdg + 10 digits) . . . . . . . . . . for 0 to 3000 kPa
±(0.2% of rdg + 0.1% of F.S.) . . . . . . . . for -80 to 0 kPa
5) For 130 kPa abs class
Accuracy: ±(0.03% of rdg + 6 digits) . . . . . . . . . . . for 0 to 130 kPa abs
Pressure Model 7674 pneumatic pressure standard for 200 kPa {2 kgf/cm2}, 25 kPa Requires air pressure
generator {2500 mmH2O} supply.
Accuracy: ±0.05% of F.S.
Dead weight gauge tester 25 kPa {2500 mmH2O} Select the one having a
Accuracy: ±0.03% of setting pressure range close to that
of the transmitter.
Pressure Model 6919 pressure regulator (pressure pump) Prepare the vacuum pump
source Pressure range: 0 to 133 kPa {1000 mmHg} for negative pressure
ranges.
Note: The above table contains the instruments capable of performing calibration to the 0.2% level. Since special maintenance and
management procedures involving traceability of each instrument to higher-level standards are required for calibration to the 0.1%
or higher level, there may be difficulties in calibration to this level in the field. For calibration to the 0.1% or higher level, use proper
instruments for required level or contact Yokogawa representatives from which the instrument was purchased or the nearest
Yokogawa office.
IM 01C25F01-01E
<8. Maintenance> 8-3
8.4 Disassembly and
Reassembly
This section describes procedures for disassembly
and reassembly for maintenance and component
replacement.
Shrouding Bolt
Always turn OFF power and shut off and release
pressures before disassembly. Use proper tools for Shrouding Bolt F0802.ai
all operations. Table 8.2 shows the tools required.
Figure 8.2 Shrouding Bolts
Table 8.2 Tools for Disassembly and Reassembly
Tool Quantity Remarks
Phillips 1 JIS B4633, No. 2
8.4.1 Replacing the Integral Indicator
screwdriver
Slotted
screwdriver
1 CAUTION
Allen wrenches 3 JIS B4648 Cautions for Explosion-proof/Flameproof
One each, nominal 3, 4 and
2.5 mm Allen wrenches Type Transmitters
Wrench 1 Width across flats, 17 mm Users are prohibited by law from modifying the
Torque wrench 1 construction of a explosion-proof/flameproof type
Adjustable 1 transmitter. This would invalidate the agency
wrench approval for the use of the transmitter in a rated
Socket wrench 1 Width across flats, 16 mm area.
Socket driver 1 Width across flats, 5.5 mm It follows that the user is prohibited from using
Tweezers 1 a explosion-proof/flameproof type transmitter
with its integral indicator removed, or from
adding an integral indicator to a transmitter. If
CAUTION such modification is absolutely required, contact
Yokogawa.
Precautions for ATEX Flameproof Type
Transmitters
This subsection describes the procedure for
• Flameproof type transmitters must be, as
replacing an integral indicator. (See figure 8.3)
a rule, removed to a non-hazardous area
for maintenance and be disassembled and
reassembled to the original state.
• On the flameproof type transmitters the two
covers are locked, each by an Allen head bolt
(shrouding bolt). When a shrouding bolt is
driven clockwise by an Allen wrench, it is going
in and cover lock is released, and then the
cover can be opened.
When a cover is closed it should be locked
by a shrouding bolt without fail. Tighten the
shrouding bolt to a torque of 0.7 N·m.
IM 01C25F01-01E
<8. Maintenance> 8-4
■ Removing the Integral Indicator 3) Disconnect the output terminal cable (cable
with brown connector at the end). When doing
1) Remove the cover.
this, lightly press the side of the CPU assembly
2) While supporting the integral indicator with one
connector and pull the cable connector to
hand, loosen its two mounting screws.
disengage.
3) Dismount the LCD board assembly from the
4) Use a socket driver (width across flats, 5.5mm)
CPU assembly.
to loosen the two bosses.
When doing this, carefully pull the LCD board
5) Carefully pull the CPU assembly straight
assembly straight forward so as not to damage
forward to remove it.
the connector pins between it and the CPU
6) Disconnect the flat cable (cable with white
assembly.
connector at the end) that connects the CPU
■ Attaching the Integral Indicator assembly and the capsule.
1) Align both the LCD board assembly and CPU
assembly connectors and engage them. NOTE
2) Insert and tighten the two mounting screws.
Be careful not to apply excessive force to the
3) Replace the cover.
CPU assembly when removing it.
Output terminal cable
■ Mounting the CPU Assembly
1) Connect the flat cable (with white connector)
Press between the CPU assembly and the capsule.
forward 2) Connect the output terminal cable (with brown
Slide
connector).
switch
Integral
Boss Zero-
NOTE
indicator
adjustment
CPU assembly screw Make certain that the cables do not get pinched
Bracket
(for zero-adjustment between the case and the edge of the CPU
screw pin) assembly.
Zero-adjustment
LCD board assembly screw pin
Mounting screw 3) Align and engage the zero-adjustment screw
Amplifier Cover pin with the groove on the bracket on the CPU
assembly. Then insert the CPU board assembly
F0803.ai straight onto the post in the amplifier case.
Figure 8.3 Removing and Attaching LCD Board 4) Tighten the two bosses. If the transmitter is
Assembly and CPU Assembly equipped with an integral indicator, refer to
subsection 8.4.1 to mount the indicator.
8.4.2 Replacing the CPU Board Assembly
NOTE
This subsection describes the procedure for
replacing the CPU assembly. (See figure 8.3) Confirm that the zero-adjustment screw pin is
placed properly in the groove on the bracket prior
■ Removing the CPU Assembly to tightening the two bosses. If it is not, the zero-
1) Remove the cover. If an integral indicator is adjustment mechanism will be damaged.
mounted, refer to subsection 8.4.1 and remove
the indicator. 5) Replace the cover.
2) Turn the zero-adjustment screw to the position
(where the screw head slot is horizontal) as
shown in figure 8.3.
IM 01C25F01-01E
<8. Maintenance> 8-5
8.4.3 Cleaning and Replacing the Capsule 3) Remove the hexagon-head screw and the
Assembly stopper.
4) Separate the transmitter section and capsule
This subsection describes the procedures for
assembly.
cleaning and replacing the capsule assembly. (See
5) Clean the capsule assembly or replace with a
figure 8.4.)
new one.
■ Reassembling the Capsule Assembly
CAUTION 1) Insert the capsule assembly to the transmitter
Cautions for Flameproof Type Transmitters section. Reattach the sopper with the hexagon-
Users are prohibited by law from modifying the head screw.
construction of a flameproof type transmitter. If 2) Tighten the two setscrews. (Tighten the screws
you wish to replace the capsule assembly with to a torque of 1.5 N·m)
one of a different measurement range, contact 3) Install the CPU assembly according to
Yokogawa. subsection 8.4.2.
The user is permitted, however, to replace a 4) After completing reassembly, adjust the zero
capsule assembly with another of the same point and recheck the parameters.
measurement range. When doing so, be sure to
Transmitter section
observe the following.
• The replacement capsule assembly must
have the same part number as the one being Hexagon
head screw
replaced.
• The section connecting the transmitter and Stopper
IM 01C25F01-01E
<8. Maintenance> 8-6
8.5.1 Basic Troubleshooting 8.5.2 Troubleshooting Flowcharts
First determine whether the process variable
The following sorts of symptoms indicate that transmitter
is actually abnormal or a problem exists in the may not be operating properly.
Example : • There is no output signal.
measurement system. • Output signal does not change even though
process variable is known to be varying.
If the problem is in the measurement system, • Output value is inconsistent with value
isolate the problem and decide what corrective inferred for process variable.
action to take.
This transmitter is equipped with a self-diagnostic Connect communicator and check self-diagnostics.
function which will be useful in troubleshooting,
and the transmitter equipped with an integral
indicator will show an alarm code as a result of self- Does the self-diagnostic YES
diagnosis. indicate problem location?
Isolate problem in
measurement system. YES Refer to Section 6.6 for rated voltage
and load resistance.
YES
Is there any pressure leak?
Environmental conditions Transmitter itself
Is there
continuity through the NO
Check/correct operating
transmitter loop wiring?
conditions. Do the loop numbers
F0805.ai match?
IM 01C25F01-01E
<8. Maintenance> 8-7
Connect a communicator and check self-diagnostics. Connect a communicator and check self-diagnostics.
Is impulse piping NO
Are valves opened or NO
connected correctly?
closed correctly?
Is transmitter
installed where there is YES
Is impulse piping NO
to high pressure and low marked variation in
pressure side correct? temperature?
Were appropriate NO
Is zero point NO instruments used for
adjusted correctly? calibration?
NO
Contact Yokogawa service personnel. Is output adjusted correctly?
F0807.ai
IM 01C25F01-01E
<8. Maintenance> 8-8
8.5.3 Alarms and Countermeasures
Table 8.3 Alarm Message Summary
Output Operation
Indicator Cause Countermeasure
during Error
None
AL. 01 Sensor problem. Outputs the signal (Hold, High, or Replace capsule when error
CAP. ERR Capsule temperature sensor Low) set with parameter. keeps appearing even after
problem. restart.
Capsule EEPROM problem.
AL. 02 Amplifier temperature sensor Outputs the signal (Hold, High, or Replace amplifier.
AMP. ERR problem. Low) set with parameter.
Amplifier EEPROM problem.
Amplifier problem.
AL. 10 Input is outside measurement Outputs high range limit value or Check input or replace capsule
PRESS range limit of capsule. low range limit value. when necessary.
AL. 11 Static pressure exceeds limit. Continues to operate and output.
ST. PRSS
AL. 12 Capsule temperature is outside Use heat insulation or make
CAP. TMP range (–50 to 130°C). lagging to keep temperature
AL. 13 Amplifier temperature is outside within range.
AMP. TMP range (–50 to 95°C)
AL. 30 Output is outside upper or lower Outputs high range limit value or Check input and range setting,
RANGE range limit value. low range limit value. and change them as needed.
AL. 31 Static pressure exceeds specified Continues to operate and
SP. RNG range. output.
AL. 35 *1 Input pressure exceeds specified Check input.
P. HI threshold.
AL. 36 *1
P. LO
AL. 39 *1 Detected temperature exceeds
TMP. HI specified threshold.
AL. 40 *1
TMP. LO
AL. 50 Specified value is outside of setting Holds output immediately before Check setting and change them
P. LRV range. error occurred. as needed.
AL. 51
P. URV
AL. 52
P. SPN
AL. 53 Continues to operate and output. Check input.
P. ADJ
AL. 60 Specified values or settings to Continues to operate and output. Check setting and change
SC. CFG define signal characterizer function them as needed.
do not satisfy the condition.
AL. 79 Displayed value exceeds limit.
OV. DISP
*1: These alarms may appear only when process alarm function is activated.
IM 01C25F01-01E
<9. General Specifications> 9-1
9. General Specifications
Please refer to the following General Specifications list for the specifications, model, suffix and option codes,
and external dimensions of each product.
The General Specifications can be downloaded from the website of Yokogawa.
Website address: https://www.yokogawa.com/solutions/products-platforms/field-instruments/
■ General Specifications List
Model Document Title Document No.
EJX110A Differential Pressure Transmitter GS 01C25B01-01EN
EJX120A Differential Pressure Transmitter GS 01C25B03-01EN
EJX130A Differential Pressure Transmiter GS 01C25B04-01EN
EJX210A Flange Mounted Differential Pressure Transmitter GS 01C25C01-01EN
EJX310A Absolute Pressure Transmitter GS 01C25D01-01EN
EJX430A Gauge Pressure Transmitter GS 01C25E01-01EN
EJX440A Gauge Pressure Transmitter GS 01C25E02-01EN
EJX510A, EJX530A Absolute and Gauge Pressure Transmitters GS 01C25F01-01EN
EJX610A, EJX630A Absolute and Gauge Pressure Transmitters GS 01C25F05-01EN
EJX118A Diaphragm Sealed Differential Pressure Transmitter GS 01C25H01-01EN
EJX118A Diaphragm Sealed Differential Pressure Transmitter (Inner Diaphragm type) GS 01C25H01-11EN
EJX438A Diaphragm Sealed Gauge Pressure Transmitter GS 01C25J03-01EN
EJX438A Diaphragm Sealed Gauge Pressure Transmitter (Inner Diaphragm type) GS 01C25J03-11EN
EJX115A Low Flow Transmitter GS 01C25K01-01EN
EJX910A Multivariable Transmitter GS 01C25R01-01EN
EJX930A Multivariable Transmitter GS 01C25R04-01EN
EJXC50A, EJXC40A,
EJAC50E, C20FE,
C20FW, C10FR,
EJXC80A, EJAC80E,
C81FA, C82FA, C81FD,
Diaphragm Seal System GS 01C25W01-01EN
C82FD, C30SW,
C30SE, C80FW,
C80FE, EJXC81A,
EJAC81E, C70SE,
C70SW
EJXC40A Digital Remote Sensor GS 01C25W05-01EN
EJX110A, EJX130A Differential Pressure Transmitter High Damping Capsule (Option Code: /HD) GS 01C25V01-01EN
EJX110A Differential Pressure Transmitters High Damping Capsule (General)
GS 01C25V02-01EN
(Option Code: /HD2)
EJX-A, EJA-E Explosion Protected Type and Marine Certificate Type GS 01C25A20-01EN
EJA110E Differential Pressure Transmitter GS 01C31B01-01EN
EJA120E Differential Pressure Transmitter GS 01C31B03-01EN
EJA130E Differential Pressure Transmitter GS 01C31B04-01EN
EJA210E Flange Mounted Differential Pressure Transmitter GS 01C31C01-01EN
EJA310E Absolute Pressure Transmitter GS 01C31D01-01EN
EJA430E Gauge Pressure Transmitter GS 01C31E01-01EN
EJA440E Gauge Pressure Transmitter GS 01C31E02-01EN
EJA510E, EJA530E Absolute Pressure Transmitter and Gauge Pressure Transmitter GS 01C31F01-01EN
EJA118E Diaphragm Sealed Differential Pressure Transmitter GS 01C31H01-01EN
EJA118E Diaphragm Sealed Differential Pressure Transmitter (Inner Diaphragm type) GS 01C31H01-11EN
EJA438E Diaphragm Sealed Gauge Pressure Transmitter GS 01C31J03-01EN
EJA438E Diaphragm Sealed Gauge Pressure Transmitter (Inner Diaphragm type) GS 01C31J03-11EN
EJA115E Low Flow Transmitter GS 01C31K01-01EN
EJAC60E, EJA560E Hygienic Adapter System (Fluidless Type)
GS 01C31Y01-01EN
Hygienic Gauge Pressure Transmitter (Fluidless Type)
EJA110E, EJA130E Differential Pressure Transmitter High Damping Capsule (Option Code: /HD) GS 01C31V01-01EN
EJA110E Differential Pressure Transmitters High Damping Capsule (General)
GS 01C31V02-01EN
(Option Code: /HD2)
If you cannot find it on our website, please contact YOKOGAWA office.
IM 01C25F01-01E
Rev-1
Revision Information
Title : Absolute Pressure and Gauge Pressure Transmitters
EJ510, EJ530, EJX610A and EJX630A
Manual No. : IM 01C25F01-01E
IM 01C25F01-01E
Rev-2
Edition Date Page Revised Item
14th Oct. 2018 1-1 1. • Add style S2 for EJA510E and EJA530E.
• Add instruction in “Regarding This Manual.”
1-2 to 1-3 1.1 • Add WARNING mark.
1-4 • Add (i)
2-3 2.8 • Correct current value of dielectric strength test. 10 mA -> 25 mA
2-4 2.9.1 a. • Add Control Drawing.
2-5 2.9.1 b. • Add notes for output signal code P and S.
2-8 to 2-9 2.9.3 (1) a. • Update Applicable Standards. Modify “Special Conditions for
Safe Use.”
2-9 to 2-10 2.9.3 (1) b. • Update Applicable Standards and Type of Protection. (Ex d ->
Ex db), Modify “Specific Conditions of Use.”
2-11 2.9.3 (1) c. • Update Applicable Standards for Ex ic.
2-12 2.9.3 (6) • Update Tag plate for flameproof type.
2-13 2.9.4 a. • Add description of Enclosure. Modify “Specific Conditions of Use.”
2-14 2.9.4 c. • Delete c (contents for old /SU2.) Add protection code Gb.
2-15 2.10 • Add descriptions in CAUTION.
2.11 • Update the directive of PED. (97/23/EC -> 2014/68/EU)
2-16 Add “2.12 EU RoHS Directive.”
2.13 • Update Standards. Delete altitude.
4-2 4.3 • Add WARNING. Modify the description for rotation.
7-2 7.2 • Add NOTE for zero adjustment.
9-4 9.1 • Update the descriptions for Housing.
9-5 to 9-10 9.2, 9.3 • Add codes for Diaphragm Seal System, option codes for local
certification and marine certification, option codes of K5 and K6.
15th Nov. 2019 Toc-3, 1-1 • Change the description for using the transmitters in Safety
Instrumented Systems (SIS) application.
2-5 2.9.1 • Changed the applicable standard for FM Explosionproof Type.
7-6 7.5.1 • Add Loop test description, figure and notes.
7-7 7.5.3 • Add Loop test description and figure.
7-8 • Add 7.5.4 Loop Test Configuration.
7-11 7.5.14.1 • Change the figure.
9-1 to 9-12 9. • Delete the description for general specifications and add the
General Specifications list.
16th Apr. 2020 2-6 to 2-9 2.9.2 • Updated the description for CSA Certification.
2-10, 2-11, 2-13 2.9.3 • Updated the description for ATEX Certification.
2-16 2.10 • Added some information for EMC Conformity Standards.
2-17 2.13 • Added (3) and (4).
IM 01C25F01-01E
<<Contents>> <<Index>>
All Rights Reserved. Copyright © 2004, Yokogawa Electric Corporation GS 01C25F01-01EN Nov. 20, 2019-00
<<Contents>> <<Index>> 3
□ NORMAL OPERATING CONDITION
(Optional features or approval codes may
affect limits.) 100(14.5) Atmospheric
pressure
Ambient Temperature Limits Working
−40 to 85°C (−40 to 185°F) pressure
kPa abs
−30 to 80°C (−22 to 176°F) with LCD display (psia)
Process Temperature Limits
Applicable range
−40 to 120°C (−40 to 248°F)
10(1.4)
Ambient Humidity Limits
0 to 100% RH
Maximum Over Pressure
2.7(0.38)
Pressure
Capsule EJX510A EJX530A
1(0.14)
A and B 4 MPa abs (580 psia) 4 MPa (580 psig) -40 0 40 80 120
C 20 MPa abs (2900 psia) 20 MPa (2900 psig) (32) (104) (176) (248)
(-40)
D 75 MPa abs (10800 psia) 75 MPa (10800 psig)
Process temperature °C (°F)
Working Pressure Limits (Silicone oil) F02E.ai
All Rights Reserved. Copyright © 2004, Yokogawa Electric Corporation GS 01C25F01-01EN Apr. 01, 2013-00
<<Contents>> <<Index>> 4
Communication Requirements “◊” □ PHYSICAL SPECIFICATIONS
(Approval codes may affect electrical requirements.)
Wetted Parts Materials
BRAIN
Diaphragm, process connector
Communication distance Refer to “MODEL AND SUFFIX CODES.”
Up to 2 km (1.25 miles) when using CEV
polyethylene-insulated PVC-sheathed cables. Non-wetted Parts Materials
Communication distance varies depending on type of Housing
cable used. • Low copper cast aluminum alloy
Load capacitance • Low copper cast aluminum alloy with corrosion
0.22 µF or less resistance properties (copper content ≤ 0.03%,
iron content ≤ 0.15%) (optional)
Load inductance • ASTM CF-8M Stainless steel (optional)
3.3 mH or less
Coating of housing
Input impedance of communicating device [for aluminum housing]
10 kΩ or more at 2.4 kHz. Polyester resin powder coating
EMC Conformity Standards Mint-green paint (Munsell 5.6BG 3.3/2.9 or its
EN 61326-1 Class A, Table2 equivalent)
EN 61326-2-3 [for option code /P or /X2]
EN 61326-2-5 (for fieldbus) Epoxy and polyurethane resin solvent coating
European Pressure Equipment Directive Degrees of protection
2014/68/EU IP66/IP67, Type 4X
Sound Engineering Practice (for all capsules) Pipe
With option code /PE3 (for D capsule) Polypropylene
Cover O-rings
Category III, Module H, Type of Equipment: Pressure Buna-N, fluoro-rubber (optional)
Accessory-Vessel, Type of Fluid: Liquid and Gas,
Group of Fluid: 1 and 2 Name plate and tag
316 SST
EU RoHS Directive
EN 50581 Fill fluid
Silicone, Fluorinated oil (optional)
Safety Requirement Standards
EN 61010-1, C22.2 No.61010-1 Weight
• Installation category: I Capsule A, B and C: 1.2 kg (2.6 lb)*
(Anticipated transient overvoltage 330 V) Capsule D: 1.4 kg (3.1 lb)*
• Pollution degree: 2 *: Without integral indicator and mounting bracket.
• Indoor/Outdoor use Add 1.5 kg (3.3 lb) for Amplifier housing code 2.
Connections
Refer to “MODEL AND SUFFIX CODES.”
All Rights Reserved. Copyright © 2004, Yokogawa Electric Corporation GS 01C25F01-01EN Mar. 25, 2019-00
<<Contents>> <<Index>> 5
MODEL AND SUFFIX CODES
For EJXC40A Remote Digital Sensor, please refer to GS 01C25W05-01EN.
The ‘#’marks indicate the construction materials conform to NACE material recommendations per MR0175/ISO 15156.
Please refer to the latest standards for details. Selected materials also conform to NACE MR0103.
All Rights Reserved. Copyright © 2004, Yokogawa Electric Corporation GS 01C25F01-01EN June 1, 2017-00
<<Contents>> <<Index>> 6
[Process Connections Code for Diaphragm Seal System]
Following table shows the code dedicated for EJXC50A Diaphragm Seal System. The code cannot be specified
without a diaphragm seal system. Please also refer to the GS 01C25W01-01EN for EJXC50A.
All Rights Reserved. Copyright © 2004, Yokogawa Electric Corporation GS 01C25F01-01EN Mar. 30, 2020-00
<<Contents>> <<Index>> 7
All Rights Reserved. Copyright © 2004, Yokogawa Electric Corporation GS 01C25F01-01EN Mar. 30, 2020-00
<<Contents>> <<Index>> 8
OPTIONAL SPECIFICATIONS
Item Description Code
Painting Color change Amplifier cover only*14 P
Amplifier cover and terminal cover, Munsell 7.5 R4/14 PR
Coating change Anti-corrosion coating*1 X2
316 SST exterior parts 316 SST zero-adjustment screw and setscrews*16 HC
Fluoro-rubber O-ring All O-rings of amplifier housing. Lower limit of ambient temperature: –15°C (5°F) HE
Lightning protector Transmitter power supply voltage: 10.5 to 32 V DC (10.5 to 30 V DC for intrinsically safe type,
9 to 32 V DC for Fieldbus communication type.)
A
Allowable current: Max. 6000 A ( 1×40 µs ), Repeating 1000 A ( 1×40 µs ) 100 times
Applicable Standards: IEC 61000-4-4, IEC 61000-4-5
Status output*2 Transistor output (sink type)
AL
Rating: 30 V DC, 120 mA DC (max) Low level: 0 to 2 V DC
Oil-prohibited use*21 Degrease cleansing treatment K1
Degrease cleansing treatment with fluorinated oilfilled capsule.
K2
Operating temperature −20 to 80°C (−4 to 176°F)
Oil-prohibited use with Degrease cleansing and dehydrating treatment K5
dehydrating treatment*21 Degrease cleansing and dehydrating treatment with fluorinated oilfilled capsule.
K6
Operating temperature −20 to 80°C ( −4 to 176°F)
Capsule fill fluid*21 Flourinated oil filled in capsule
K3
Operating temperature −20 to 80°C (−4 to 176°F)
Calibration units*3 P calibration (psi unit) D1
bar calibration (bar unit) (See Table for Span and Range Limits.) D3
M calibration (kgf/cm2 unit) D4
Output limits and failure Failure alarm down-scale : Output status at CPU failure and hardware error is −5%, 3.2mA DC
C1
operation*4 or less.
Failure alarm down-scale: Output status at CPU
NAMUR NE43 Compliant C2
failure and hardware error is −5%, 3.2 mA DC or less.
Output signal limits:
3.8 mA to 20.5 mA Failure alarm up-scale: Output status at CPU
C3
failure and hardware error is 110%, 21.6 mA or more.
Gold-plated diaphragm*13*21 Surface of isolating diaphragms are gold plated, effective for hydrogen permeation. A1
Wired tag plate 316 SST tag plate wired onto transmitter N4
Data configuration at factory*5 Software damping, Descriptor,
Data configuration for HART communication type CA
Message
Data configuration for BRAIN communication type Software damping CB
Advanced diagnostics*17 Multi-sensing process monitoring
• Impulse line blockage detection *18 DG6
• Heat trace monitoring
European Pressure PED 2014/68/EU
Equipment Directive*15*21 Category: III, Module: H, Type of Equipment: Pressure Accessory-Vessel, PE3
Type of Fluid: Liquid and Gas, Group of Fluid: 1 and 2
Material certificate*6*21 Process Connector M15
Process connector, Diaphragm, Capsule body MA2
Pressure test/ Test Pressure: 200 kPa (29 psi) *7 T05
Leak test certificate*12*21 Test Pressure: 2 MPa (290 psi) *8 Nitrogen Gas or Water*11 T06
Test Pressure: 10 MPa (1450 psi) *9 Retention time: one minute T07
Test Pressure: 50 MPa (7200 psi) *10 T08
Parameter list*22 List of setting and adjustment parameters YP
Functional safety(SIL)*19*20 Low temperature expansion of functional safety Amb.Temp.: −55 to 85°C SLT
All Rights Reserved. Copyright © 2004, Yokogawa Electric Corporation GS 01C25F01-01EN Mar. 30, 2020-00
<<Contents>> <<Index>> 9
*1: Not applicable with color change option. Not applicable for amplifier housing code 2.
*2: Check/External indicator terminals cannot be used when this option code is specified.
Not applicable for output signal code F and G.
*3: The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option codes D1,
D3, and D4.
*4: Applicable for output signal codes D, E and J. The hardware error indicates faulty amplifier or capsule.
*5: Also see ‘Ordering Information’.
*6: Material traceability certification, per EN 10204 3.1 B.
*7: Applicable for capsule code A.
*8: Applicable for capsule code B.
*9: Applicable for capsule code C.
*10: Applicable for capsule code D.
*11: Dry nitrogen gas or pure water is used for oil-prohibited use (option codes K1 and K2).
*12: The unit on the certificate is always kPa/MPa regardless of selection of option code D1, D3 and D4.
*13: Applicable for wetted parts material code S.
*14: Not applicable for amplifier housing code 2 and 3.
*15: Applicable for measurement span code D. If compliance with category III is needed, specify this option code.
*16: 316 or 316L SST. The specification is included in amplifier code 2.
*17: Applicable only for output signal code E and J.
*18: The change of pressure fluctuation is monitored and then detects the impulse line blockage. See TI 01C25A31-01E for
detailed technical information required for using this function.
*19: Not applicable for EJX510A.
*20: Not applicable for output signal code F, G, P, S, and process connections code for diaphragm seal system.
*21: Not applicable with process connections code for diaphragm seal system P.
*22: Applicable only for output signal code D, E and J.
All Rights Reserved. Copyright © 2004, Yokogawa Electric Corporation GS 01C25F01-01EN Mar. 30, 2020-00
<<Contents>> <<Index>> 10
DIMENSIONS
Unit: mm (approx.inch)
Model EJX510A and EJX530A
● With process connections code 7
95(3.74) 188(7.40)
60(2.36)*2 Integral indicator Zero
(optional) adjustment 110(4.33)
Extenal indicator 12 39
Conduit connection Conduit connection
(0.47) (1.54)
(optional)
ø78(3.07)
(2.76)
54
ø70
126(4.96)
110(4.33)
(2.13)
159(6.26)
(6.50)
165
(0.24)
Ground terminal
Electrical connection
for code 5 and 9. Open to
atmosphere*1
2-inch pipe
Mounting bracket 12*3 (O.D. 60.5 mm) 129(5.08)
(optional) (0.47)
(6.77)
172
ø6
5(0.20)
(0.24)
F04E.ai
All Rights Reserved. Copyright © 2004, Yokogawa Electric Corporation GS 01C25F01-01EN Nov. 20, 2019-00
<<Contents>> <<Index>> 11
Connection Description
Analog output EJX electrical terminal
Distributor
+ + 24V DC
SUPPLY
– 250Ω
*1
CHECK A *1: Either A or + –
– – 250Ω
If shield cable is not
*1
used, communication ALARM A
is not possible. *1: Either A or +
Magnetic
External power supply valve
30V DC, 120mA max
All Rights Reserved. Copyright © 2004, Yokogawa Electric Corporation GS 01C25F01-01EN May 20, 2016-00
<<Contents>> <<Index>> 12
< Ordering Information > “◊” < Factory Setting > “◊”
Specify the following when ordering
Tag number As specified in order
For output signal code –J, refer to GS 01C25T01-
01EN. Software
‘2.00 s’ or as specified in order
damping *1
1. Model, suffix codes, and option codes
Calibration range
2. Calibration range and units lower range value
As specified in order
1) Calibration range can be specified with range
Calibration range
value specifications up to 5 digits (excluding any upper range As specified in order
decimal point) for low or high range limits within value
the range of -32000 to 32000. When reverse
[EJX530A]
range is designated, specify Lower Range Selected from mmH2O, mmH2O(68°F),
Value (LRV) as greater than Upper Range Value mmAq*2, mmWG*2, mmHg, Pa, hPa*2,
(URV). kPa, MPa, mbar, bar, gf/cm2, kgf/cm2,
2) Specify only one unit from the table, ‘Factory inH2O, inH2O(68°F), inHg, ftH2O,
Settings’ when shipped.’ ftH2O(68°F) or psi. (Only one unit can be
3. Display scale and units (for transmitters equipped Calibration range specified)
with integral indicator only) units [EJX510A]
Specify either 0 to 100 % or engineering unit scale Torr, Pa abs, hPa abs*2, kPa abs,
and ‘Range and Unit’ for engineering units scale: MPa abs, mbar abs, bar abs, kgf/cm2 abs,
Scale range can be specified with range limit mmH2O abs, mmH2O abs(68°F),
specifications up to 5 digits (excluding any decimal mmHg abs, inH2O abs, inH2O abs(68°F),
point) for low or high range limits within the range inHg abs, ftH2O abs, ftH2O abs(68°F),
of -32000 to 32000. The unit display consists of psia, atm.
6-digit, therefore, if the specified unit is longer than Display setting
Designated value specified in order.
7 characters excluding ‘/’, the first 6 characters will (%, or user scaled value.)
be displayed on the unit display.
*1: To specify these items at factroy, /CA or /CB
4. TAG NO (if required) option is required.
Specified characters (up to 16 characters for *2: Not available for HART protocol type.
BRAIN, 22 characters for HART, or 16 characters
for /N4 tag) are engraved on the stainless steel tag
< Material Cross Reference >
plate fixed on the housing.
5. SOFTWARE TAG (for HART only. if required) ASTM JIS
Specified characters (up to 32 characters) are set
grade 316 SUS316
as “Tag” (the first 8 characters) and “Long tag”*1
(32 characters) in the amplifier memory. Use grade 316L SUS316L
alphanumeric capital letters. grade 304 SUS304
When the “SOFTWARE TAG” is not specified,
specified “TAG NO” is set as “Tag” (the first 8 <Information on EU WEEE Directive>
characters) and “Long tag”*1 (22 characters) in the EU WEEE (Waste Electrical and Electronic Equipment)
amplifier memory. Directive is only valid in the EU.
*1: applicable only when HART 7 is selected.
6. Other factory configurations (if required) This instrument is intended to be sold and used only
Specifying option code CA or CB will allow further as a part of equipment which is excluded from WEEE
configuration at factory. Following are configurable Directive, such as large-scale stationary industrial
items and setting range. tools, a large-scale fixed installation and so on, and,
[/CA : For HART communication type] therefore, subjected to the exclusion from the scope
1) Descriptor (up to 16 characters) of the WEEE Directive. The instrument should be
2) Message (up to 30 characters) disposed of in accordance with local and national
3) Software damping in second (0.00 to 100.00) legislation/regulations.
[/CB : For BRAIN communication type]
1) Software damping in second (0.00 to 100.00)
All Rights Reserved. Copyright © 2004, Yokogawa Electric Corporation GS 01C25F01-01EN Sep. 27, 2018-00
Subject to change without notice.
Drawings EJX510A, EJX610A, EJX530A
and EJX630A
Absolute and Gauge Pressure Transmitter
ø78(3.07)
(2.76)
54
ø70
126(4.96)
110(4.33)
(2.13)
159(6.26)
6
(6.50)
165
(0.24)
Ground terminal
*1: Only for EJX530A and EJX630A whose measurement span code is A, B, or C.
*2: 58 mm(2.28 inch) for measurement span code D.
*3: 11 mm(0.43 inch) for measurement span code D.
*4: When electrical connection code 7 or C is selected, a blind plug is protruded up to 8 mm from the conduit connection.
(6.77)
172
ø6
5(0.20)
(0.24)
P-
Instruction Manual
D100258X012 Types 98L and 98H
September 2020
▲ WARNING
Failure to follow these instructions or
to properly install and maintain this
equipment could result in an explosion,
fire and/or chemical contamination
causing property damage and personal
injury or death.
Fisher™ backpressure regulators and
relief valves must be installed, operated
and maintained in accordance with W6155
pressure registration and standard adjusting screw Neoprene (CR) -40 to 180°F / -40 to 82°C
0 to 300°F / -18 to 149°C
for 5 to 200 psig / 0.34 to 13.8 bar set pressure range Fluorocarbon (FKM)(5)
Limited to 200°F / 93°C for hot water
Type 98HM: Direct-operated high-pressure Ethylenepropylene (EPDM) (5)
-40 to 275°F / -40 to 135°C
Perfluoroelastomer (FFKM)(5) 0 to 425°F / -18 to 218°C
backpressure regulator/relief valve with external PTFE Diaphragm protector -40 to 400°F / -40 to 207°C
pressure registration and standard adjusting screw
for 5 to 275 psig / 0.34 to 19.0 bar set pressure range Temperature Capabilities for Metal Parts(1)(4)
Body Sizes and End Connection Styles MATERIAL TEMPERATURE RANGE
Cast iron(6) -40 to 406°F / -40 to 207°C
BODY MATERIAL WCC Steel -20 to 450°F / -29 to 232°C
TYPE
Cast Iron WCC Steel, CF8M Stainless steel CF8M Stainless steel -40 to 450°F / -40 to 232°C
1/4 through 1 NPT, NPS 1/2 through 1 /
98L 1/4, 1/2, 3/4, 1 NPT DN 15 through 25, SWE, CL150 RF, Type 98HM Sensing Line Connection
CL300 RF, PN16/25/40 RF
1/4 through 2 NPT,
NPS 1/2, 1-1/2 or 2 / DN 15, 40 or 50 Body: 1/8 NPT
98H
1/4, 1/2, 3/4, 1, 1-1/2, NPS 1/2 through 2 / DN 15 through 50, NPS 3/4 or 1 / DN 20 or 25 Body: 1/4 NPT
2 NPT SWE, CL150 RF, CL300 RF,
PN 16/25/40 RF Pressure Registration
98HM ---- 1/2, 3/4, 1, 1-1/2, 2 NPT
Types 98L and 98H: Internal
Maximum Cold Working Pressures of Body Size Type 98HM: External
and Materials(1)(2)
Options
MAXIMUM INLET
REGULATOR BODY SIZE
BODY AND SPRING PRESSURE(3) • Handwheel or tee handle for Types 98L and 98H
CASE MATERIALS
psig bar • Tapped spring case vent for Types 98L, 98H
Type 98L All Sizes
Cast Iron
Steel
60
125
4.1
8.6
and 98HM
Stainless Steel 125 8.6 • Seal washer to permit spring case pressure
Type 98H All Sizes
Cast Iron
Steel
300
300
20.7
20.7
loading for Types 98L, 98H and 98HM
Stainless Steel 300 20.7
Steel 300 20.7
Approximate Weights
Type 98HM All Sizes
Stainless Steel 300 20.7 Type 98L
NPS 1/4 Body: 6 lbs / 3 kg
Flow Coefficient
NPS 1/2 / DN 15 Body: 13 lbs / 6 kg
C1: 35
NPS 3/4 / DN 20 Body: 30 lbs / 14 kg
IEC Sizing Coefficients NPS 1 / DN 25 Body: 30 lbs / 14 kg
Type 98H
BODY SIZE
NPS DN
XT FD FL Km NPS 1/4 Body: 7 lbs / 4 kg
1/4 ---- 0.91 0.83 NPS 1/2 / DN 15 Body: 7 lbs / 2 kg
1/2 15
0.78 0.50
0.83 0.69 NPS 3/4 / DN 20 Body: 16 lbs / 7 kg
3/4 and 1 20 and 25 0.88 0.77
1-1/2 and 2 40 and 50 0.92 0.85 NPS 1 / DN 25 Body: 16 lbs / 7 kg
NPS 1-1/2 / DN 40 Body: 55 lbs / 25 kg
Relief Pressure Ranges NPS 2 / DN 50 Body: 55 lbs / 25 kg
See Tables 1 and 2 Type 98HM
NPS 1/2 / DN 15 Body: 8 lbs / 4 kg
NPS 3/4 or 1 / DN 20 or 25 Body: 20 lbs / 9 kg
NPS 1-1/2 or 2 / DN 40 or 50 Body: 73 lbs / 33 kg
1. The pressure/temperature limits in this instruction manual or any applicable standard limitation should not be exceeded.
2. Temperature and/or the body end connection may decrease these maximum pressures.
3. Maximum inlet pressure equals set pressure plus buildup.
4. Pressure and/or the body end connection may decrease these maximum temperatures.
5. Not for use on steam service.
6. Not available for Type 98HM.
2
October 2008
Types 98L and 98HType 98HM
Type 98HM Backpressure/Relief Valve
CONTROL SPRING
CONTROL SPRING
REGISTRATION ELASTOMER
HOLE DIAPHRAGM
ELASTOMER
DIAPHRAGM
VALVE PLUG
VALVE PLUG
C OMP TO UPSTREAM
TO UPSTREAM
O-RING SEAT SENSING LINE
SENSING LINE
A6925 M1155
INLET PRESSURE
ORIFICE OUTLET PRESSURE ORIFICE
ATMOSPHERIC PRESSURE
INLET PRESSURE
OUTLET PRESSURE
ATMOSPHERIC PRESSURE
The Type 98HM can be used for backpressure or pressure is vented. When upstream pressure drops
relief applications in liquid, gas or steam service. back to normal, the valve resumes its closed position.
The Type 98HM features a sensing line connection
for sensing pressure externally from the regulator. Installation
The Type 98HM is a direct-operated, spring-to-close
regulator and requires no external power to operate.
A seal washer for the set screw can be included when ▲ WARNING
applications require pressure loading of the spring
case (not available on NPS 1-1/2 and 2 / DN 40 and Personal injury or system damage may
50 bodies). result if this relief valve/backpressure
regulator is installed where service
Note conditions could exceed the limits
Using a Type 98HM as a relief valve given on the Specifications section
does not exclude the installation of an or regulator nameplate. Installations
ASME certified full flow relief valve as should be adequately protected from
specified by local codes and regulations physical damage.
or system design. Overpressuring any portion of this
equipment may cause equipment
Principle of Operation damage, leaks in the relief valve/
backpressure regulator, or personal
Relief or backpressure valves respond to changes in injury due to bursting of pressure-
upstream pressure. Pressure changes register under containing parts. System operation
the diaphragm (see Figure 2) through a registration within the limits shown in the
hole in the valve body (through upstream sensing Specifications section (page 2) does
line connection for Type 98HM). When the pressure not eliminate the possibility of damage
increases beyond the spring setting, the diaphragm from external sources or debris in the
pressure overcomes the spring compression. This pipeline. The relief valve/backpressure
causes the valve plug to move away from the orifice. regulator should be inspected for
The flow line through the valve is open and excess damage regularly and after any
overpressure condition.
3
Types 98L and 98H
Table 1. Types 98L and 98H Relief Set Pressure Ranges
TYPE 98L RELIEF SET TYPE 98H RELIEF SET
BODY SIZES SPRING SPRING WIRE DIAMETER SPRING FREE LENGTH
PRESSURE RANGE(1) PRESSURE RANGE(1)
COLOR
NPS DN psig bar psig bar In. mm In. mm
2 to 7 0.14 to 0.48 15 to 35 1.0 to 2.4 Yellow 0.148 3.76 2.00 50.8
6 to 14 0.41 to 0.97 25 to 75 1.7 to 5.2 Green 0.170 4.32 2.00 50.8
1/4 ----
12 to 25 0.83 to 1.7 70 to 140 4.8 to 9.6 Red 0.207 5.26 1.93 49.0
20 to 38 1.4 to 2.6 130 to 200 9.0 to 13.8 Blue 0.225 5.72 2.08 52.8
2 to 7 0.14 to 0.48 15 to 35 1.0 to 2.4 Yellow 0.207 5.26 2.50 63.5
6 to 14 0.41 to 0.97 25 to 75 1.7 to 5.2 Green 0.234 5.94 1.02 25.9
1/2 15
12 to 25 0.83 to 1.7 70 to 140 4.8 to 9.6 Red 0.281 7.14 2.44 62.0
20 to 38 1.4 to 2.6 130 to 200 9.0 to 13.8 Blue 0.331 8.41 2.25 57.2
2 to 7 0.14 to 0.48 15 to 35 1.0 to 2.4 Yellow 0.306 7.77 4.00 102
20 6 to 14 0.41 to 0.97 25 to 75 1.7 to 5.2 Green 0.343 8.71 4.00 102
3/4 and 1
and 25 12 to 25 0.83 to 1.7 70 to 140 4.8 to 9.6 Red 0.406 10.3 4.00 102
20 to 38 1.4 to 2.6 130 to 200 9.0 to 13.8 Blue 0.468 11.9 3.75 95.3
---- ---- 5 to 35 0.3 to 2.4 Dark Gray 0.468 11.9 6.56 167
40 ---- ---- 20 to 65 1.4 to 4.5 Light Blue 0.531 13.5 6.56 167
1-1/2 and 2
and 50 ---- ---- 50 to 100 3.5 to 6.9 Light Gray 0.562 14.2 6.56 167
---- ---- 80 to 170 5.5 to 11.7 Black 0.625 15.9 6.56 167
1. All springs may be backed off to 0 psig / 0 bar. However, highest capacities and best performances are obtained by using these springs in their recommended ranges.
SPRING BODY SIZE SPRING RANGE SPRING SPRING WIRE DIAMETER SPRING FREE LENGTH
MATERIAL NPS DN psig bar COLOR In. mm In. mm
15 to 35 1.0 to 2.4 Yellow 0.207 5.26 2.50 63.5
25 to 75 1.7 to 5.2 Green 0.234 5.94 2.62 66.5
1/2 15
70 to 140 4.8 to 9.6 Red 0.281 7.14 2.44 62.0
130 to 200 9.0 to 13.8 Blue 0.331 8.41 2.25 57.2
15 to 35 1.0 to 2.4 Yellow 0.306 7.77 4.00 102
25 to 75 1.7 to 5.2 Green 0.343 8.71 4.00 102
Steel 3/4 and 1 20 and 25
70 to 140 4.8 to 9.6 Red 0.406 10.3 4.00 102
130 to 200 9.0 to 13.8 Blue 0.468 11.9 3.75 95.3
5 to 35 0.34 to 2.4 Dark Gray 0.469 11.9 6.50 165
20 to 65 1.4 to 4.5 Light Blue 0.531 13.5 6.50 165
1-1/2 and 2 40 and 50
50 to 100 3.5 to 6.9 Light Gray 0.563 14.3 6.50 165
80 to 170 5.5 to 11.7 Black 0.656 16.7 6.50 165
15 to 100 1.0 to 6.9 Unpainted 0.282 7.16 2.50 63.5
1/2 15
100 to 275 6.9 to 19.0 Unpainted 0.375 9.53 2.50 63.5
Stainless steel
15 to 100 1.0 to 6.9 Unpainted 0.432 11.0 4.03 102
3/4 and 1 20 and 25
100 to 275 6.9 to 19.0 Unpainted 0.562 14.2 4.03 102
1. All springs may be backed off to 0 psig / 0 bar. However, highest capacities and best performances are obtained by using these springs in their recommended ranges.
Unbox and inspect the valve. Remove pipe scale and backpressure regulator, or personal injury
other foreign material from the connecting pipeline. due to bursting of pressure-containing
Apply a suitable pipe compound to the external parts. The system should be inspected
threads. The relief valve can be installed in any after any overpressure condition.
position as long as the flow is in the direction indicated
by the arrow cast on the body. Relief or backpressure ranges are from 2 to 200 psig /
0.14 to 13.8 bar. The individual spring range of your
Overpressure Protection relief valve is stamped on the nameplate.
Maximum inlet pressures depend upon body materials
and temperatures. See the Specifications section
▲ WARNING for the maximum inlet pressure of the valve. The
valve should be inspected for damage after any
Overpressuring any portion of this
overpressure condition.
equipment may result in equipment
damage, leaks in the relief valve /
4
Types 98L and 98H
Vents Loosen the jam nut (key 17). To increase the setting,
turn the adjusting screw (key 15) clockwise. Turn the
adjusting screw counterclockwise to decrease the
▲ WARNING setting. Tighten the jam nut.
If remote venting is necessary, an optional tapped vent Due to normal wear and damage that may occur from
in the spring case is available. Install remote vent lines external sources, relief valve parts such as the O-rings,
in the spring case and outlet openings. The vent lines gaskets, diaphragm, orifice and valve plug should be
must have the largest practical diameter and be as short inspected periodically and replaced as necessary. The
as possible with a minimum number of bends or elbows. frequency of inspection and replacement depends upon
the severity of service conditions or the requirements of
state and federal laws.
Startup Instructions are given below for disassembly of the
Key numbers are shown in Figures 3 through 5. With Types 98L and 98H backpressure regulators/relief
proper installation completed and system equipment valves. These valves do not have to be removed
properly adjusted, close any vent valves, and slowly from the pipeline to inspect internal parts. Suitable
open the upstream shutoff valve while using pressure lubricants are indicated on the assembly drawings.
gauges to monitor pressure. Apply the lubricants as the relief valve is being
reassembled. Refer to Figures 3, 4 and 5 while
If set pressure adjustment is necessary, monitor
servicing the relief valve.
the inlet pressure with a gauge during the
adjustment procedure.
△ CAUTION
Adjustment Metal diaphragms have thin sharp
Each unit is factory set for the pressure specified on edges. To avoid hand cuts, use caution
your order. The allowable spring range is stamped when handling the diaphragm and
on the nameplate. If a pressure setting beyond particularly the diaphragm edge.
the indicated range is required, replace with the
Type 98 relief valves contain or may contain a thin
appropriate spring. Be sure to label the valve to
metal diaphragm. Use care when handling the metal
indicate the new pressure range.
diaphragms to prevent hand injuries or damage to
Always use a pressure gauge to monitor pressure the diaphragm.
when making adjustments.
1. Relieve the spring tension by loosening the jam nut
All regulator springs can be backed off to 0 psig / (key 17) and turning the adjusting screw (key 15)
0 bar. Recommended set pressure ranges available, counterclockwise. Remove the cap screws (key 16).
maximum inlet pressures and temperatures, and Lift off the spring case (key 2), upper spring seat
color codes of the respective springs are shown in the (key 9) and spring (key 11).
Specifications section and Tables 1 and 2.
2. Lift out the diaphragm unit which includes the pusher
post (key 6), lower spring seat (key 8), diaphragm
5
Types 98L and 98H
head (key 25, Type 98L), washer (key 7), valve plug 8. Separate the remainder of the diaphragm unit
(key 4) and diaphragm (key 12). parts. Take the locknut (key 26) off of the pusher
There will be two diaphragms if the diaphragm post (key 6). Slide off the lock washer (key 23),
material is metal or fluorocarbon (FKM) except for lower spring seat, diaphragm head (Type 98L),
Type 98L, NPS 1/4, 2 to 7 psi / 0.14 to 0.48 bar diaphragm, washer (key 7) and gasket (key 10).
range which uses only one metal diaphragm. 9. Slip the plug (key 4) onto the pusher post. Place
For Type 98HM, two diaphragms are also required if a gasket (key 10) on the shaft of the pusher post
material used is Ethylenepropylene (EPDM) except (key 6) over the threaded portion until it rests on
for NPS 3/4 or 1 / DN 20 or 25 which uses only one the base of the post. If elastomer diaphragm is
Ethylenepropylene (EPDM) diaphragm. used, place a metal washer (key 7) on top of the
gasket. For Type 98H, NPS 1-1/2 to 2 / DN 40 to
Refer to Figures 3, 4 and 5 for the diaphragm and 50 with metal diaphragm, place another gasket
gasket assembly. on the shaft of the pusher post until it rests on the
3. Check the orifice (key 3). If it needs replacing or bottom diaphragm head (key 25), see Figure 4.
repairing, unscrew the valve plug guide (key 5) Refer to Figures 3 to 5.
and then the orifice. The valve plug can be
Note
removed by sliding it off of the pusher post (key 6).
If a metal diaphragm is to be replaced by
Note an elastomer diaphragm or an elastomer
If damage to elastomer or metal seating diaphragm by a metal diaphragm, a new
surfaces is severe, replace the orifice pusher post is required. Each diaphragm
(key 3) and valve plug O-ring (key 22) material requires a different pusher post
with new parts. However, by following the length and make sure the proper number
lapping procedure below, it is possible to of metal or elastomer diaphragm that will
repair metal seating surfaces if they are be used is followed. Refer to the Parts
only slightly worn or scratched. List section for the correct number of
diaphragm to be used.
4. Lapping procedure: 10. For the metal diaphragms, replace the large
a. Place a small amount of 500-grit silicon carbide diaphragm gasket (key 19) on the surface of the
or aluminum oxide lapping compound on a flat body (key 1) that will support the diaphragms.
surface such as a piece of heavy plate glass. There will be two diaphragms used per regulator,
b. Take the valve plug (key 4) or orifice (key 3) except for Type 98L, NPS 1/4 with 2 to 7 psi / 0.14
and move it in a figure 8 motion on the lapping to 0.48 bar set pressure range which uses only
compound. Do not allow the part to tip or rock one metal diaphragm. The raised surfaces of the
since this would round the corners. metal diaphragms should be placed in the unit so
that they are facing toward the assembler (toward
c. Repeat step b for each part, using an 800-grit the spring) except only when one diaphragm is
or 1000-grit silicon carbide or aluminum oxide being used then the raised surface should be
lapping compound. facing down (towards the body). See Figures 3 to
d. Wash away all traces of the lapping compound. 5 as references.
To help prevent scratching the seating surfaces, 11. Slip the lower spring seat (key 8) and lock washer
a light coat of oil may be applied before returning (key 23) back onto the pusher post. Screw on the
the valve plug and orifice to the body (key 1). locknut (key 26) and return the diaphragm unit to
See Table 3 for torque specifications. the body (key 1).
5. Return the orifice and valve plug guide (key 5) to 12. Set the spring (key 11) in the lower spring seat and
the body. place the upper spring seat (key 9) on the spring.
6. Place a small amout of sealant on the threads 13. Put the spring case (key 2) over the spring and
before installing the valve plug guide and the onto the body. Tighten the cap screws (key 16)
orifice. See Table 3 for torque specifications. finger tight only.
7. To replace the valve plug O-ring (key 22), remove 14. To ensure proper slack in the diaphragm, apply
the screw (key 24) and O-ring retainer (key 21) some spring compression by turning the adjusting
from the plug. Remove and replace the O-ring. screw clockwise. Finish tightening the cap screws.
6
Types 98L and 98H
7
Types 98L and 98H
SPRING METAL 17
(KEY 11) DIAPHRAGMS
(KEY 12) 15 L
DIAPHRAGM
9 11
GASKET
(KEY 19)
26
TYPE 98L EXCEPT FOR NPS 1/4, 2 TO 7 psi / 0.14 TO 2
0.48 bar RANGE WITH TWO METAL DIAPHRAGMS
SPRING METAL 23 8
(KEY 11) DIAPHRAGM
(KEY 12)
25 5
DIAPHRAGM
12
GASKET
(KEY 19)
16
19 1
4
6 3
10
L
30A7027 TYPE 98L ASSEMBLY WITH METAL DIAPHRAGM
- APPLY LUBRICANT(1)
L = ANTI-SEIZE COMPOUND
1. Lubricants must be selected such that they meet the temperature requirements.
Key 3* Orifice
ELASTOMER SEAT
BODY SIZE METAL TO METAL SEAT
Standard Applications
NPS DN 416 Stainless Steel 316 Stainless Steel 416 Stainless Steel 316 Stainless Steel
8
Types 98L and 98H
17
15 L
9 11
26
2
23 8
25 5
16 24
4
7
12 22
10
6
3
S
L
21
1
30A7028
TYPE 98L ASSEMBLY WITH ELASTOMER DIAPHRAGM
- APPLY LUBRICANT OR SEALANT(1)
L = ANTI-SEIZE COMPOUND
S = MULTI-PURPOSE PTFE THREAD SEALANT
1. Lubricants and sealants must be selected such that they meet the temperature requirements.
Figure 3. Type 98L Relief Valve Assemblies (continued)
METAL
SPRING DIAPHRAGMS
(KEY 11) (KEY 12)
L
15
DIAPHRAGM 9
GASKET 17
(KEY 19)
2
FOR TYPE 98H WITH
11
2 METAL DIAPHRAGMS
23
26
16 8
10 12
19
FOR TYPE 98H, NPS 1-1/2 AND 2 /
DN 40 AND 50 WITH 2 GASKETS (KEY 10)
AND 2 DIAPHRAGM HEADS (KEY 25) L
5
6
L
10 4
1
FOR TYPE 98H, NPS 1/4
THROUGH 1 / DN 25 3
30A7029
TYPE 98H ASSEMBLY WITH METAL DIAPHRAGM
- APPLY LUBRICANT OR SEALANT(1)
L = ANTI-SEIZE COMPOUND
1. Lubricants and sealants must be selected such that they meet the temperature requirements.
9
Types 98L and 98H
15 L
9
17
2
11
23
26
14 16 8
12
6
7
4 L
10
22
3
1
L 21 24 S
SPRING METAL
(KEY 11) DIAPHRAGMS L
(KEY 12)
15
DIAPHRAGM 17
GASKET
(KEY 19)
11 9
53
6
5
4
10 L 1
3
37B4753 TYPE 98HM ASSEMBLY WITH METAL SEAT AND DIAPHRAGM
- APPLY LUBRICANT(1)
L = ANTI-SEIZE COMPOUND
1. Lubricants must be selected such that they meet the temperature requirements.
10
Types 98L and 98H
15 L
17 2
11 9
L
54 23
26 8
16 12
19 6
L
10 5
S
53 22
4 24
21 1
3
L
15
L
17
2
11
9
L
54
23
26
8
16
12
7
6
L
10
5
S
53 22
4 24
21 1
3
L
39B3360 TYPE 98HM WITH ELASTOMER SEAT AND DIAPHRAGM
- APPLY LUBRICANT OR SEALANT(1)
L = ANTI-SEIZE COMPOUND
S = MULTI-PURPOSE PTFE THREAD SEALANT
1. Lubricants and sealants must be selected such that they meet the temperature requirements.
11
Types 98L and 98H
LUBE OIL
COOLER
SENSING
LINE
PUMP
TYPE 98HM
Webadmin.Regulators@emerson.com Facebook.com/EmersonAutomationSolutions
Fisher.com LinkedIn.com/company/emerson-automation-solutions
Twitter.com/emr_automation
D100258X012 © 1965, 2020 Emerson Process Management Regulator
Technologies, Inc. All rights reserved. 09/20.
Emerson Automation Solutions The Emerson logo is a trademark and service mark of Emerson
Electric Co. All other marks are the property of their prospective owners.
Fisher™ is a mark owned by Fisher Controls International LLC, a
Americas Asia Pacific business of Emerson Automation Solutions.
McKinney, Texas 75070 USA Singapore 128461, Singapore The contents of this publication are presented for informational purposes
T +1 800 558 5853 T +65 6777 8211 only, and while every effort has been made to ensure their accuracy, they
+1 972 548 3574 are not to be construed as warranties or guarantees, express or implied,
regarding the products or services described herein or their use or
Europe Middle East and Africa applicability. All sales are governed by our terms and conditions, which
Bologna 40013, Italy Dubai, United Arab Emirates are available upon request. We reserve the right to modify or improve the
T +39 051 419 0611 T +971 4 811 8100 designs or specifications of such products at any time without notice.
Emerson Process Management Regulator Technologies, Inc. does not
assume responsibility for the selection, use or maintenance of any
product. Responsibility for proper selection, use and maintenance of any
Emerson Process Management Regulator Technologies, Inc. product
remains solely with the purchaser.
PRESSURE REGULATORS
GAS BACK PRESSURE
MODEL BP
APPLICATION: Pilot Assembly
Self-contained, pilot-operated regulator used on vent lines Motor Valve Stem Assembly
for separators, heat treaters, compressor stations, gas gathering
systems. Upstream Pressure
Motor Valve Diaphragm Pressure
FEATURES:
Tight shut-off - Class VI
Single soft seat
Removable valve seat
Minimum maintenance
All internal parts can be removed with valve in line
Single-point adjustment of setpoint
Utilizes upstream pressure as actuation pressure
Efficient 3-way plug accurately maintains setpoint
CERTIFICATIONS:
Canadian Registration Number (CRN): ®‡
0C16234.24567890NTY (Ductile)
0C15604.24567890NTY (Steel)
Kimray is an ISO 9001- certified manufacturer.
CLASSIFICATIONS:
Non-Bleed / Intermittent Vent
Oil
All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
‡ Configuration of Back Pressure Control Valve is a trademark of Kimray, Inc.
Issued 2/21 www.kimray.com 06:10.1
PRESSURE REGULATORS
DUCTILE GAS BACK PRESSURE
MODEL BP PARTS DRAWING
22 23
21 24
20 20
19 25
26
18
27
9
28
17
29
16
30
15
31
14
32
13
9
12
33
11
34
10
35
9
36
8 37
7
38
6
39
5 33
4 40
3 41
2 42
1 43
All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
‡ Configuration of Back Pressure Control Valve is a trademark of Kimray, Inc.
06:10.2 www.kimray.com Issued 2/21
PRESSURE REGULATORS
DUCTILE GAS BACK PRESSURE
MODEL BP PARTS LIST
PART NUMBER
ITEM QTY. DESCRIPTION STANDARD CORROSIVE
1 INCH 2 INCH 3 INCH 4 INCH 6 INCH 1 INCH 2 INCH 3 INCH 4 INCH 6 INCH
Body
NPT Thru 2033 1709 1634 2001 ---- 2033 ‡ 1709 ‡ 1634 ‡ 2001 ‡ ----
1 1 150RF Thru ---- 1913 1914 2002 2466 ---- 1913 ‡ 1914 ‡ 2002 ‡ 2466 ‡
Grooved Thru ---- 2964 ---- ---- ---- ---- 2964 ‡ ---- ---- ----
NPT Angle ---- 4999 ---- ---- ---- ---- 4999 ‡ ---- ---- ----
2 1 Gasket * ---- 276 277 196 279 ---- 276 277 196 279
3 1 Seat * 163HSN 164HSN 165HSN 166HSN 167HSN 163HSN 164HSN 165HSN 166HSN 167HSN
4 2 Plug 699 699SS6
5 1 Valve Stem 137 138 139 140 141 137SS6 138SS6 139SS6 140SS6 141SS6
6 2 Back Up * 148T 149T 150T 151T 152T 148T 149T 150T 151T 152T
7 1 O-Ring * 153 154 155 156 157 153 154 155 156 157
8 1 Gasket * 195 196 197 198 199 195 196 197 198 199
9 2 Vent Plug 1357 147 1357SS6 147SS6
10 1 Diaphragm Plate 132SS6 133 134 135 136 132SS6 133 134 135 136
11 1 Diaphragm * 127 1706 1640 2015 2140 127 1706 1640 2015 2140
12 (QTY) Bolt 4318 (6) 965 (8) 907(10) 907 (12) 2142 (12) 4318 (6) 965 (8) 907(10) 907 (12) 2142 (12)
13 1 Gasket * 3018 118 3018 118
14 1 Pilot Seat * 3016 113 3016SS6 113SS6
15 1 Pilot Housing 3013 1701 3013SS6 1701 ‡
16 1 Diaphragm * 3014 110 3014 110
17 1 Spacer Ring * ---- 7437 ---- 7437
18 1 Diaphragm * 3011P 5259P 3011P 5259P
19 1 Diaphragm Plate 3009 105 3009SS6 105SS6
20 2 Spring Guide 4484SS6 2612 4484SS6 2612SS6
21 1 Thread Seal 4542 4488 4542 4488
22 1 Nut 1676 2377 1676SS6 2377SS6
23 1 Adjusting Screw 6976 5163 6976SS6 5163SS6
24 1 Washer 4543 4491 4543 4491S6
25 1 Spring 4323 2611 4323 2611
26 1 Bonnet 4525 2610 4525 2610 ‡
27 4 Bolt 6972 907 6972 907
28 1 Pressure Gauge 7707 7707
29 1 Spring * 3008 108 3008 108HAC
30 1 Nipple 6890 648 6890SS6 648SS6
31 1 1/4 F30 Filter YAS YASSS6
32 1 Diaph. Nut 3010 107 3010SS6 107SS6
33 2 Elbow 875 875SS6
34 1 Pilot Seat * 3015 565 3015SS6 565SS6
35 1 Pilot Plug * 3017 112 3017 112
36 1 Upper Housing 3019 1719 1636 2003 2177 3019SS6 1719 ‡ 1636 ‡ 2003 ‡ 2177 ‡
37 1 Tubing 4416S6 123SS6 124SS6 125SS6 126SS6 4416S6 123SS6 124SS6 125SS6 126SS6
38 1 Spring 3008 ---- 3008 ----
39 1 Lower Housing 142 1704 1632 145 146 142 ‡ 1704 ‡ 1632 ‡ 145 ‡ 146 ‡
40 1 Seat Disc 158 159 160 161 162 158SS6 2493SS6 2494SS6 2495SS6 2961SS6
Standard Ratio Plug 176SS6 177SS6 178 179 180 176SS6 177SS6 3076SS6 3078SS6 3079SS6
41 1
Reduced Ratio Plug 4932 4933 1228SS6 177SS6 178 4932SS6 4933SS6 1228SS6 177SS6 3076SS6
42 1 Removable Seat ---- 272K 273K 274K 275K ---- 2496SS6K 2497SS6K 2498SS6K 3075SS6K
43 1 Nut * 172 173 906 175 172SS6 173SS6 174SS6 175SS6
2 Lifting Ring (not shown) ---- ---- 7559 ---- ---- ---- 7559 ----
‡ Coated Parts available with "K" service type
RRU RDG RDH RDI RDJ RRU RDG RDH RDI RDJ
Repair Kits
* These parts are recommended spare parts and are stocked as repair kits.
20 21
19 22
16 23
18 24
17
25
16
26
15
27
14
28
13
29
12
30
11
31
10
6
9
32
8
33
7
34
6
5 35
4 32
3 36
2 37
1 38
All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
PART NUMBER
ITEM QTY. DESCRIPTION
STANDARD CORROSIVE
Body
1 1 NPT Thru 4942 4942 ‡
150RF Thru 5292 5292
2 1 Nut * 172 172SS6
3 1 Plug 699 699SS6
4 1 Gasket * 195 195
5 1 Diaphragm Plate 132SS6 132SS6
6 2 Vent Plug 1357 1357SS6
7 1 Diaphragm * 127 127
8 1 Upper Housing 3019 3019SS6
9 6 Bolt 4318 4318
10 1 Gasket * 3018 3018
11 1 Pilot Plug * 3017 3017
12 1 Diaphragm * 3014 3014
13 1 Pilot Housing 3013 3013SS6
14 1 Diaphragm * 3011P 3011P
15 1 Diaphragm Plate 3009 3009SS6
16 2 Spring Guide 4484SS6 4484SS6
17 1 Vent Plug 147 147SS6
18 1 Spring * 4323 4323
19 1 Washer * 4543 4543
20 1 Adjusting Screw 6976 6976S6
21 1 Nut 1676 1676SS6
22 1 Thread Seal * 4542 4542
23 1 Bonnet 4525 4525 ‡
24 1 Pressure Gauge 7707 7707
25 4 Bolt 6972 6972
26 1 Spring * 3008 3008
27 1 Diaph. Nut 3010 3010SS6
28 1 Nipple 6890 6890S6
29 1 Pilot Seat * 3016 3016SS6
30 1 Pilot Seat * 3015 3015SS6
31 1 1/4 F30 Filter YAS YASSS6
32 2 Elbow 875 875SS6
33 1 Tubing 4416S6 4416S6
34 1 Lower Housing 4632 4632 ‡
35 1 Valve Stem 137 137SS6
36 1 Seat Disc 158 158SS6
37 1 Seat * 163HSN 163HSN
Standard Ratio Plug 176SS6 176SS6
38 1
Reduced Ratio Plug 4932 4932SS6
‡ Coated Parts available with "K" service type
Repair Kits RRT-TB RRT-TB
* These parts are recommended spare parts and are stocked as repair kits.
24 25
23 26
22 22
21 27
20 28
19 29
18 30
17 31
10 32
16 33
15 34
14 4
13 35
12 36
4 37
11 38
10 39
9 40
8 41
7 35
6 42
5 43
4 44
3 45
2 46
1 47
All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
PART NUMBER
ITEM QTY. DESCRIPTION STANDARD CORROSIVE
2 INCH 3 INCH 4 INCH 6 INCH 2 INCH 3 INCH 4 INCH 6 INCH
1 1 Body 2468 2469 2470 2959 2468 ‡ 2469 ‡ 2470 ‡ 2959 ‡
2 1 Nut * 173 906 175 173SS6 174SS6 175SS6
3 1 Gasket * 276 277 196 279 276 277 196 279
4 3 Plug 699 699SS6
5 2 Back Up * 149T 150T 151T 152T 149T 150T 151T 152T
6 1 O-Ring * 5225 5226 5227 4086 5225 5226 5227 4086
7 1 Spacer 4557DS6 4561DS6 4566DS6 4571DS6 4557DS6 4561DS6 4566DS6 4571DS6
8 1 Lower Housing 2481 2482 2483 2957 2481 ‡ 2482 ‡ 2483 ‡ 2957 ‡
9 1 Gasket * 196 197 198 199 196 197 198 199
10 2 Vent Plug 147 147SS6
11 1 Adapter 7244 7244S6
12 1 Diaphragm * 1706 1640 2015 2140 1706 1640 2015 2140
13 1 Bonnet 2487 2488 2489 2956 2487 ‡ 2488 ‡ 2489 ‡ 2956 ‡
14 1 Nipple 2516 2516SS6
15 1 Base 4995 4995 ‡
16 4 Nut 241 241
17 1 Pilot Housing 2514 2514 ‡
18 1 Gasket 118 118
19 1 Diaphragm Nut 107 107SS6
20 1 Diaphragm * 5259P 5259P
21 1 Diaphragm Plate 105 105SS6
22 2 Spring Guide 2612 2612SS6
23 1 Spring 2611 2611
24 1 Adjusting Screw 2613 2613
25 1 Nut 2377 2377
26 1 Bonnet 2671 2671 ‡
27 4 Bolt 1232 1232
28 1 Pressure Gauge 7707 7707
29 1 Spring * 108 108HAC
30 1 Spacer Ring 7437 7437
31 1 Pilot Seat * 565 565SS6
32 1 Nipple 648 648SS6
33 1 Diaphragm * 110 110
34 1 1/4 F30 Filter YAS YASSS6
35 2 Elbow 875 875SS6
36 1 Pilot Plug 112 112
37 1 Pilot Seat 113 113SS6
38 1 Tubing 2505SS6 2552SS6 2529SS6 5061SS6 2505SS6 2552SS6 2529SS6 5061SS6
39 (QTY) Bolt 965 (8) 907(10) 907 (12) 2142 (12) 965 (8) 907(10) 907 (12) 2142 (12)
40 1 Diaphragm Plate 2490 2491 2492 2958 2490SS6 2491SS6 2492SS6 2958SS6
41 1 O-Ring * 154 807 156 157 154 807 156 157
42 1 Retainer 4557ES6 4561ES6 4566ES6 4571ES6 4557E26 4561E26 4566ES6 4571ES6
43 1 Valve Stem 138 139 140 141 138SS6 139SS6 140SS6 141SS6
44 1 Seat Disc 2493SS6 2494SS6 2495SS6 2961SS6 2493SS6 2494SS6 2495SS6 2961SS6
45 1 Seat * 164HSN 165HSN 166HSN 167HSN 164HSN 165HSN 166HSN 167HSN
46 1 Ratio Plug 177SS6 178 179 180 177SS6 3076SS6 3078SS6 3079SS6
47 1 Removable Seat 2496SS6K 2497SS6K 2498SS6K 3075SS6K 2496SS6K 2497SS6K 2498SS6K 3075SS6K
2 Lifting Ring (not shown) 7559 ---- 7559 ----
‡ Coated Parts available with "K" service type
RAE RAF RAG RAH RAE RAF RAG RAH
Repair Kits
* These parts are recommended spare parts and are stocked as repair kits.
®‡
G
DUCTILE STEEL 250 S/FGT-BP-S
LINE BODY
SIZE SIZE
A B C D* E F G H* I
All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
‡ Configuration of Back Pressure Control Valve is a trademark of Kimray, Inc.
06:II www.kimray.com Issued 10/20
PRESSURE REGULATORS
SEALS
Oil G-E E E E
Ozone P G G-E E
Set G G G-E P
Tear F F F P
Water/Steam F E P G
Weather F G E E
CO2 F-G G G G
H2S P F P E
Methanol F E P P
Dynamic G G G G
Properties
Electrical F F F G-E
Impermeability G G G G
Tensile Strength G G-E G F
-20° to +225°F -20° to +250°F -15° to +400°F +15° to +450°F
Temp. Range
-29° to +107°C -29° to +121°C -26° to +204°C -9° to +232°C
RATINGS: P-POOR, F-FAIR, G-GOOD, E-EXCELLENT
BP = Back Pressure
Series: BN = Back Pressure Non - Vent
R = Pressure Regulator BV = Back Pressure Vacuum
Model: FB = Liquid Back Pressure
Line Size: PR = Pressure Reducing
1 = 1 NPS RN = Pressure Reducing Non - Vent
2 = 2 NPS RB = Pressure Reducing Balanced
3 = 3 NPS DP = Differential Pressure
4 = 4 NPS
6 = 6 NPS
End Connection:
SA = FNPT
AR = 150RF Flange
GV = Grooved (2 NPS only)
Shell Material:
D = Ductile Iron
W = Steel (WCB)
Inner Valve Size:
F = Full Port
R = Reduced Port
Control Range:
1 = 10 - 300 psig Spring
Service Type:
S = Standard
C = Corrosive
K = Corrosive with Coated Shell Components
R BP 2 SA D F 1 S
30
29
28 31
27 32
26 33
25 34
24 35
23 36
22 37
21 38
39
20
40
19
41
18
42
4
43
17
44
16
45
4
46
15
47
14
45
13
48
12
49
11
50
4 51
10 52
9 53
8 47
7 54
5 55
6 56
5 50
4 57
3 58
2 59
1 60
All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
®‡
G
DUCTILE STEEL 250 S/FGT-BP-S
LINE BODY
SIZE SIZE
A B C D* E F G H* I
All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
‡ Configuration of Back Pressure Control Valve is a trademark of Kimray, Inc.
06:II www.kimray.com Issued 10/20
PRESSURE REGULATORS
SEALS
Oil G-E E E E
Ozone P G G-E E
Set G G G-E P
Tear F F F P
Water/Steam F E P G
Weather F G E E
CO2 F-G G G G
H2S P F P E
Methanol F E P P
Dynamic G G G G
Properties
Electrical F F F G-E
Impermeability G G G G
Tensile Strength G G-E G F
-20° to +225°F -20° to +250°F -15° to +400°F +15° to +450°F
Temp. Range
-29° to +107°C -29° to +121°C -26° to +204°C -9° to +232°C
RATINGS: P-POOR, F-FAIR, G-GOOD, E-EXCELLENT
BP = Back Pressure
Series: BN = Back Pressure Non - Vent
R = Pressure Regulator BV = Back Pressure Vacuum
Model: FB = Liquid Back Pressure
Line Size: PR = Pressure Reducing
1 = 1 NPS RN = Pressure Reducing Non - Vent
2 = 2 NPS RB = Pressure Reducing Balanced
3 = 3 NPS DP = Differential Pressure
4 = 4 NPS
6 = 6 NPS
End Connection:
SA = FNPT
AR = 150RF Flange
GV = Grooved (2 NPS only)
Shell Material:
D = Ductile Iron
W = Steel (WCB)
Inner Valve Size:
F = Full Port
R = Reduced Port
Control Range:
1 = 10 - 300 psig Spring
Service Type:
S = Standard
C = Corrosive
K = Corrosive with Coated Shell Components
R BP 2 SA D F 1 S
APPLICATION: OPERATION:
Regulation of inlet pressure to gas compressors. Control of The Pilot Assembly and Motor Valve Stem Assembly
supply or distribution system pressure (Crosshatched) are the only moving units in the regulator.
The PILOT PLUG consists of two stainless balls rigidly con-
SET POINT DRIFT RATIO: nected together. Upstream Pressure (Red) is the supply pres-
8:1 sure to the pilot and is also in constant communication with the
top side of the MOTOR VALVE DIAPHRAGM. The area of the
CERTIFICATIONS: MOTOR VALVE DIAPHRAGM is twice the area of the motor
Canadian Registration Number (CRN): valve seat, assuring a Class VI positive shut-off.
0C16234.24567890NTY (Ductile) The lower seat for the PILOT PLUG is the Motor Valve
0C15604.24567890NTY (Steel) Diaphragm Pressure inlet (Red to Yellow). The upper seat for the
PILOT PLUG is the pressure vent (Yellow to Atmosphere). The
PILOT SPRING loads the upper side of the Pilot Assembly and
is opposed on the underneath side by the controlled Downstream
Pressure (Blue).
Assume the PILOT SPRING is compressed with the
ADJUSTING SCREW for a desired Downstream Pressure set-
ting. With Downstream Pressure (Blue) too low, the PILOT
SPRING forces the Pilot Assembly downward to close the upper
seat (Yellow to Atmosphere) and open the lower seat (Red to
Yellow).
This lets full Upstream Pressure (Red) load the underneath
side of the MOTOR VALVE DIAPHRAGM to balance the pressure
Pilot Assembly on the top side. Upstream Pressure (Red) acting under the motor
Motor Valve Stem Assembly valve seat, opens the valve. As Downstream Pressure(Blue)
Upstream Pressure increases to the set pressure Pilot Assembly assumes a position
in which both seats of the PILOT PLUG are closed.
Downstream Pressure
Should Downstream Pressure (Blue) rise above the set
Motor Valve Diaphragm Pressure pressure, the Pilot Assembly moves upward against the PILOT
SPRING to open the pressure vent (Yellow to Atmosphere).
Motor Valve Diaphragm Pressure (Yellow) decreases to reposi-
Adjusting Screw tion the Motor Valve Stem Assembly.
The intermittent vent pilot, three-way valve action of the
PILOT PLUG against its seat adjusts the Motor Valve Diaphragm
Pressure (Yellow), repositioning the Motor Valve stem Assembly
Pilot Spring to accommodate any rate of flow. The rapid but stable reposition-
ing produces a true throttling action.
Pilot Diaphragm
Pilot Plug
}
4318, 6 Req'd. 1"
Elbow 1481 6" only 965, 8 Req'd. 2"
Connector 874
Screw 907, 10 Req'd. 3"
142, 1" 907, 12 Req'd. 4"
1704, 2" 2142, 16 Req'd. 6"
Lower Housing 1632, 3"
145, 4" 127, 1" *
146, 6" 1706, 2"
Diaphragm 1640, 3"
4019SS6, 1" 2015, 4"
216SS6, 2" 2140, 6"
Tubing 217SS6, 3" 6505, 1"
Ell 875, 2" thru 6"
4251S6, 4"
218SS6, 6" 132SS6, 1"
Plate 133 to 136, 2"-6"
* Gasket 195 to 199
* O Ring 153 to 157 158, 1"
539, 1" 159, 2"
Ell 875, 2" thru 6" Disc 1229, 3"
Not Req'd. 1" * 1358, 1" 2493SS6, 4"
276, 2" 1388, 2" 160, 6"
Gasket 277, 3" Spring 7132, 3"
196, 4" 1529, 4"
Not Req'd. 1" 279, 6" 1575, 6"
4934K, 2" Body Back Up, 2 Req'd. 148T to 152T *
Removovable 1219DK, 3" 137, 1"
Seat 1220DK, 4" LINE THRU 138, 2"
1221SS6K, 6" 4932, 1" Stem 1222SS6, 3"
4933, 2" SIZE SCREWED FLANGED
Ratio Plug 1228SS6, 3" 1" 2033 1223SS6, 4"
177SS6, 4" 1224SS6, 6"
2" 1709 1913
178, 6" 163HSN, 1"
172, 1" 3" 1634 1914 164HSN, 2"
4" 2001 2002 Seat 1230P, 3"
* Lock Nut 173, 2" 6" 2466
173, 3"& 4" 164HSN, 4"
906, 6" 165HSN, 6"
THRU VALVES AVAILABLE: NOTES:
PART BODY † OPER. MAX † † REP. *These parts are recommended spare parts and are stocked
NO. CONNECTION MODEL NO. PRES. W.P. KIT as repair kits.
AKF5 1" NPT 130 SGT PR5-D 10-300 300 RRU The numbers of a series assigned to a part indicate different
ABU5 2" NPT 230 SGT PR5-D 10-300 300 RDG line sizes. For example: Stem 137-1", 138-2", 139-3", 140-4",
ABW5 2" 150RF 218 FGT PR5-D 10-250 250 RDG 141-6".
ABX5 3" NPT 330 SGT PR5-D 10-300 300 RDH For standard & optional Seals, Metals, Cv values,
ABY5 3" 150RF 318 FGT PR5-D 10-250 250 RDH Material specifications & Dimensions see Technical Data on
ACA5 4" NPT 430 SGT PR5-D 10-300 300 RDI pages A:I - A:V
ACB5 4" 150RF 418 FGT PR5-D 10-250 250 RDI † Standard Trim size is same as connection size. for
ACC5 6" 150RF 618 FGT PR5-D 10-250 250 RDJ Reduced trim sizes, see A:I
†† Max W.P. valves based on -20°F to 100°F. See page A:V
for temps above 100°F
Kimray is an ISO 9001- certified manufacturer.
Current Revision: Bulletin No. A07295
Change Seat number www.kimray.com Issued 2/18
PRESSURE REGULATORS
FLOW COEFFICIENT
®‡
G
DUCTILE STEEL 250 S/FGT-BP-S
DUCTILE STEEL
LINE BODY
SIZE SIZE
A B C D* E F G H* I
A:II ‡ Configuration of Back Pressure Valve is a trademark of Kimray, Inc. Current Revision:
Issued 5/15 www.kimray.com New Page
PRESSURE REGULATORS
SEALS
‡
®
Table 2 - Seal Options Pilot Diaphragm
Seat
Oil G-E E E E G E
Ozone P G G-E E E E
Set G G G-E P F P
Tear F F F P G-E E
Water/Steam F E P G P E
Weather F G E E E E
CO2 F-G G G G G E
H2S P F P E G E
Methanol F E P P P E
Dynamic G G G G E P
Electrical F F F G-E F E
Properties
Impermeability G G G G G E
Tensile Strength G G-E G F G-E E
Temp. Range (°F) -20° to +225°F -20° to +250°F -15° to +400°F +15° to +450°F -40° to +180°F -450° to +500°F
Temp. Range (°C) -29° to +107°C -29° to +121°C -26° to +204°C -9° to +232°C -40° to +82°C -268° to +260°C
Current Revision: ‡ Configuration of Back Pressure Valve is a trademark of Kimray, Inc. A:III
Update ratings www.kimray.com Issued 4/20
PRESSURE REGULATORS
MATERIAL SPECIFICATION
Removable 2" thru 6" Ductile Body Ductile, ASTM A-395 Stainless Steel ASTM A-351 CF8M
Seat 2" thru 6" Steel Body Stainless Steel ASTM A-351 CF8M N/A
‡
®
Stem
Tubing
Seat Disc
A:IV ‡ Configuration of Back Pressure Valve is a trademark of Kimray, Inc. Current Revision:
Issued 3/20 www.kimray.com Remove chart
PRESSURE REGULATORS
TEMPERATURE
‡
®
Kimray valves conform to ASME B16.34-2009 for working pressure vs working temperature & ASME B16.5-1996 for flanges and flanged
fittings.
Current Revision: ‡ Configuration of Back Pressure Valve is a trademark of Kimray, Inc. A:V
New Page www.kimray.com Issued 5/15
Compact
performance
Threaded
Safety Relief Valves
Series 437
Type 437 · 438 · 439
Series 459
Type 459 · 462
CATALOG
The Safety Valve
Series 459 Frontview 462 H4 GG
4c
Packed lever H4
Series 459
Cap H2 Series 459
Flanged version
Frontview 462 H3 GG
4c
Threaded Safety Relief Valves Spring Loaded
Contents
Contents
General
Applications 5
Features and Benefits 5
Codes and Standards 5
Overview 6
Series 437
Cap H2
LWN 471.01 3
Threaded Safety Relief Valves Spring Loaded
General
pact design, developed in close coop- compliant with and approved accord-
eration with plant engineers and ser- ing to ASME (Sec. VIII, Div. 1), the
products.
4 LWN 471.02
Threaded Safety Relief Valves Spring Loaded
Applications · Features and Benefits · Codes and Standards
LWN 471.03 5
Threaded Safety Relief Valves Spring Loaded
General · Overview
Overview
Capacity /
Orifice
6 LWN 471.04
Threaded Safety Relief Valves Spring Loaded
General · Overview
459
0.099 inch2
437
Long
Version
0.122 inch2 459
0.206 inch2
437
Standard 459
Version 0.373 inch2
0.122 inch2 Capacity /
Orifice
Soft seal
438
Long Version
0.122 inch2
462
0.206 inch2
438
Standard 462
Version 0.373 inch2
0.122 inch2 Capacity/
Orifice
439 0.122 inch2
Soft seal
Sealing soft seal, O-ring Sealing vulcanized soft seal Set pressure up to 5075 psig
Design very compact Design very compact Sealing soft seal, O-ring
Design compact,
optional bellows
8 LWN 471.06
Threaded Safety Relief Valves Spring Loaded
Series 437
Series 437
LWN 471.07 9
Series Threaded Safety Relief Valves Spring Loaded
437 Materials Type 437
18
Type 4373 Type 4374
Item Part Name
Chrome Steel Stainless Steel 19
40
18
19
16
2.2 2.1
12
54
17
57
61
48
Type 437
Flanged version
10 LWN 471.08
Threaded Safety Relief Valves Spring Loaded
Materials Type 438 · Type 439
7 Disc with 16
316L 316L
soft seal 1
12 Spindle AISI 420 316L
12
16 / 172 Spring plate AISI 430F 316L
Adjusting screw AISI 430F 316L
18 54
with bushing PTFE PTFE
19 Lock nut Steel 316L
2
40 Cap H2 Steel 316L
54 Spring Stainless steel Stainless steel
57 Pin Stainless steel Stainless steel 7
61 Ball Hardened
316
stainless steel 1
Flanged Version
54
2
2
17
7
57
1
61
48
7
How to Order
Numbering System
1 Article Number
2 Set Pressure
3 Connections
Type
Types of sealing
437 438 439
Metal seat
Metal-to-metal ✓
Metal-to-metal stellited ✓
Soft seat
EPDM ✓ ✓
NBR ✓ ✓
CR ✓ ✓
FFKM (Kalrez®) ✓ ✓
FKM (Viton®) ✓ ✓
Plastic seat
SP Vespel-SP1 ✓
PCTFE Kel-F ✓
PTDE-FDA Teflon ✓
2 Material Code
3 – Body Material Chrome Steel
4 – Body Material Stainless Steel
3 Valve Code
Identifies valve size,
body material and orifice,
refer to page 14.
12 LWN 471.10
Threaded Safety Relief Valves Spring Loaded
How to Order – Numbering System
4 Options
5 Documentation
6
Code and Medium
LWN 471.11 13
Series Threaded Safety Relief Valves Spring Loaded
437 How to order · Article Numbers
How to order
Type 437
1.5 - 1348 4373.2602 4373.2604 1.5 - 986 4374.3142 4374.3144
standard version
0.122
Type 437
1349 - 2610 4373.2612 4373.2614 987 - 2610 4374.3152 4374.3154
long version 1
Type 438
7 - 1348 4383.2862 4383.2864 7 - 986 4384.2982 4384.2984
standard version
0.122
Type 438
1349 - 2610 4383.2872 4383.2874 987 - 2610 4384.2992 4384.2994
long version1
Type 439
0.122 1.5 - 232 4393.2882 4393.2884 1.5 - 232 4394.2892 4394.2894
standard version
Note: 1 The “long version” is a high pressure version with extended outlet body.
14 LWN 471.12
Threaded Safety Relief Valves Spring Loaded
How to Order · Available Connections
3 3 3
/4” V62 /4” V59 /4” V77
Male thread
Option Option
Size ANSI-Class Size ANSI-Class
Code Code
150 V01 150 V24
300 300
V02 V13
600 600
1 1
/2” /2”
900
V03 900 V14
1500
2500 V04 – –
150 V05 150 V15
300 300
V06 V16
600 600
3 3
/4” /4”
900 Female thread
V07 900 V17
1500
2500 V08 – –
150 V09 150 V18
300 300
V10 V19
600 600 1
1” 1”
900
V11 900 2 V20
1500
2500 V12 – –
Notes: 1 Maximum inlet flange class: #1500
2 Extended center to face dimension outlet: 4 3/4” (120 mm)
LWN 471.13 15
Series Threaded Safety Relief Valves Spring Loaded
437 Dimensions and Weights Threaded / Flanged Connections US Units
a
s
s
b
16 LWN 471.14
Threaded Safety Relief Valves Spring Loaded
Dimensions and Weights Threaded / Flanged Connections Metric Units
LWN 471.15 17
Series Threaded Safety Relief Valves Spring Loaded
437 Pressure Temperature Ratings Type 437 / 438 / 439 US Units
1
/2” – 1” 0.122 Stainless Steel 1.5 986 987 2610 - 450 + 536
1
/2” – 1” 0.122 Stainless Steel 15 986 987 2610 - 49 + 356
1
/2” – 1” 0.122 Stainless Steel 1.5 232 - 49 + 356
Notes: 1 For flanged versions the pressure temperature rating acc. to ANSI B 16.34 may supersede these limits
2 The temperature is limited by the soft seal material, please refer to soft seal selection table on page 23.
18 LWN 471.16
Threaded Safety Relief Valves Spring Loaded
Pressure Temperature Ratings Type 437 / 438 / 439 Metric Units
1
/2” – 1” 78.5 Stainless Steel 0.1 68 68 180 - 268 + 280
1
/2” – 1” 78.5 Stainless Steel 1 68 68 180 - 45 + 180
1
/2” – 1” 78.5 Stainless Steel 0.1 16 - 45 + 180
Notes: 1 For flanged versions the pressure temperature rating acc. to ANSI B 16.34 may supersede these limits.
2 The temperature is limited by the soft seal material, please refer to soft seal selection table on page 23.
LWN 471.17 19
Series Threaded Safety Relief Valves Spring Loaded
437 Accessories and Options · Caps and Levers
22
16 2
14 12
2 1
19
Open
25 13
24 25
23
24
23
Closed
20 LWN 471.18
Threaded Safety Relief Valves Spring Loaded
Accessories and Options · Metal Seat
Type 4373
Standard material for the disc is a hard- 57 57
ened stainless steel. The combination
of a hard disc material and a softer seat 7.3 7.3
material (316L) provides for improved
wear resistance and longer product life. 7.1 7.1
LWN 471.19 21
Series Threaded Safety Relief Valves Spring Loaded
437 Accessories and Options · Soft Seal
Soft Seal
O-ring disc (Type 438)
Vulcanized soft seal (Type 439)
Disc with sealing plate (Type 437, optional)
57
57
7.2 7.3
Code 7.1
Code 7.1 7.1 letter1
letter 1
Code 7.2
letter1 7.2
7.3
7.3
O-ring disc Type 438 Vulcanized soft seal disc Type 439 Disc with sealing plate Type 437
Application Disc with vulcanized soft seal Disc with sealing plate
Type 437, 438 and 439 are provided Type 439 with a vulcanized soft seat For applications, where the increased
with a soft seal disc for allows maintained tightness close to tightness of a soft seal is required but
● superior tightness the set pressure especially at lower set the temperature is too low or too high
● maintained tightness close to the pressures. for an o-ring-disc, e.g. liquefied gases.
set pressure
Features and Benefits Note: 1Code letter: Please refer to soft seal
selection table
● three different designs for extended
application range
● minimized leakage and product loss
● large selection of soft seal materials
● simple replacement of soft seal
● standard ARP o-ring sizes
● one standard durometer per o-ring
material
● reduced maintenance costs
316L with
7.1 vulcanized soft seal,
Disc 316L Disc Disc 316L
refer to soft seal
selection table
7.2 Lifting aid 316L Lifting aid 316L Lifting aid 316L
22 LWN 471.20
Threaded Safety Relief Valves Spring Loaded
Accessories and Options · Soft Seal
Teflon®
PTFE (Polytetra- A J44 -300 -184 302 150 Nearly all chemicals
fluoroethylene)
Other Please contact LESER LLC
Notes: 1 The code letters will be stamped on the disc. For soft seal materials other than listed the code letter X will be used.
2 Pressure and temperature service must be considered in any case.
3 For type 439: material is ISOLAST®.
LWN 471.21 23
Series Threaded Safety Relief Valves Spring Loaded
437 Accessories and Options · Heating Jacket
Application
Pressure relief valves in systems to be
protected from media which are vis-
cous, sticky or have a tendency to
crystallize out of solution can be fitted
with a heating jacket.
For type 437 the outlet body is fitted
with a fabricated heating jacket. The
position of the heating connections is
shown in figure 1.
Operating Operating
Pressure Temperatures
pmax Tmax
24 LWN 471.22
Threaded Safety Relief Valves Spring Loaded
Spare Parts · Discs · O-ring
Spare Parts
Discs – Type 438 soft seal with o-ring, disc material: 316L (Item 7)
CR EPDM FPM (FKM) NBR FFKM
Valve Orifice O-ring size Neoprene Ethylene Viton Nitrile Kalrez®
Size [Inch2 ] ARP-no.
K F L N C
all 7
0.122
/16 x 3/32 200.8349.9751 200.8349.9741 200.8349.9771 200.8349.9781 200.8349.9791
(standard
ARP 111
version)
all 7
0.122
/16 x 3/32 200.8549.9053 200.8549.9042 200.8549.9073 200.8549.9083 200.8549.9091
(long
ARP 111
version)
7
0.122
/16 x 3/32 502.0107.2651 502.0107.2641 502.0107.2671 502.0107.2681 502.0107.2691
all
ARP 111
LWN 471.23 25
Series Threaded Safety Relief Valves Spring Loaded
437 Spare Parts · Inlet Bodies
Orifice Orifice
Size Part Number Size Part Number
[Inch2 ] [Inch2 ]
1 136.4449.9204 1 136.4449.9211
/2” 0.122 /2” 0.122
3 136.4549.9204 3 136.4549.9211
/4” 0.122 /4” 0.122
Inlet Bodies Types 438 / 439 Threaded connections – Material 316L (Item 1)
Male NPT Female NPT
Orifice Orifice
Size Part Number Size Part Number
[Inch2 ] [Inch2 ]
1 136.4949.9204 1 136.4949.9211
/2” 0.122 /2” 0.122
3 136.5449.9204 3 136.5449.9211
/4” 0.122 /4” 0.122
26 LWN 471.24
Threaded Safety Relief Valves Spring Loaded
Approvals Series 437 · Rated slope
Canada CRN 437 / 438 / 439 S/G/L OG0772.9C 0.122 Refer to ASME Sec. VIII
S/G 0.50
437
PED 97 / 23 / EC L 072020111 0.35
Europe 0.122
(CE-marking) S/G Z0008/0/21-1 0.40
438 / 439
L 0.33
αw
S/G 0.50
Germany 437
AD 2000- L 0.35
TUEV-SV 980 0.122
Merkblatt A2 S/G 0.40
438 / 439
L 0.33
China: CSBQTS
Russia: DIN GOST
Others
Ship classifica-
BV, DNV, GL, LROS, RINA
tion authorities:
Notes: 1 Acc. to ASME Sec. VIII the certified coefficient of discharge K is calculated by K = 0.9 * KD
For sizing acc. to ASME Sec. VIII K must be used in the sizing equations.
Rated slope
Within the capacity certification accord- Rated slope values can be converted
ing to ASME Sec. VIII the coefficients into K values. The table above shows
of discharge for series 437 are issued as the converted K values. The original
“rated slope values” instead of K values. rated slope values are listed below.
Fluid Rated slope Type 437 Rated slope Type 438 /439
LWN 471.25 27
Series Threaded Safety Relief Valves Spring Loaded
437 Capacities US Units · STEAM · AIR · WATER
Type 437
STEAM AIR WATER
ASME Section VIII ASME Section VIII ASME Section VIII
[lb/ hr] [S.C.F.M.] [US - G.P.M.]
Capacities for saturated steam accord- Capacities for air according to ASME Capacities for water according to ASME
ing to ASME Section VIII (UV), based on Section VIII (UV), based on set pressure Section VIII (UV), based on set pressure
set pressure plus 10 % overpressure. plus 10 % overpressure at 60 °F. plus 10 % overpressure at 68 °F.
Capacities at 30 psig and bellow are Capacities at 30 psig and below are Capacities at 30 psig and below are
based on 3 psig overpressure. based on 3 psig overpressure. based on 3 psig overpressure.
28 LWN 471.26
Threaded Safety Relief Valves Spring Loaded
Capacities Metric Units · STEAM · AIR · WATER
Type 437
STEAM AIR WATER
ASME Section VIII ASME Section VIII ASME Section VIII
[kg / hr] [Sm3/ hr] [103 kg/ hr]
Capacities for saturated steam accord- Capacities for air according to ASME Capacities for water according to ASME
ing to ASME Section VIII (UV), based on Section VIII (UV), based on set pressure Section VIII (UV), based on set pressure
set pressure plus 10 % overpressure. plus 10 % overpressure at 16 °C. plus 10 % overpressure at 20 °C.
Capacities at 2.07 bar (30 psig) and Capacities at 2.07 bar (30 psig) and Capacities at 2.07 bar (30 psig) and
below are based on 0.207 bar (3 psig) below are based on 0.207 bar (3 psig) below are based on 0.207 bar (3 psig)
overpressure. overpressure. overpressure.
LWN 471.27 29
Series Threaded Safety Relief Valves Spring Loaded
437 Capacities US Units · STEAM · AIR · WATER
Capacities for saturated steam accord- Capacities for air according to ASME Capacities for water according to ASME
ing to ASME Section VIII (UV), based on Section VIII (UV), based on set pressure Section VIII (UV), based on set pressure
set pressure plus 10 % overpressure. plus 10 % overpressure at 60 °F. plus 10 % overpressure at 68 °F.
Capacities at 30 psig and bellow are Capacities at 30 psig and below are Capacities at 30 psig and below are
based on 3 psig overpressure. based on 3 psig overpressure. based on 3 psig overpressure.
30 LWN 471.28
Threaded Safety Relief Valves Spring Loaded
Capacities Metric Units · STEAM · AIR · WATER
Capacities for saturated steam accord- Capacities for air according to ASME Capacities for water according to ASME
ing to ASME Section VIII (UV), based on Section VIII (UV), based on set pressure Section VIII (UV), based on set pressure
set pressure plus 10 % overpressure. plus 10 % overpressure at 16 °C. plus 10 % overpressure at 20 °C.
Capacities at 2.07 bar (30 psig) and Capacities at 2.07 bar (30 psig) and Capacities at 2.07 bar (30 psig) and
below are based on 0.207 bar (3 psig) below are based on 0.207 bar (3 psig) below are based on 0.207 bar (3 psig)
overpressure. overpressure. overpressure.
LWN 471.29 31
Series Threaded Safety Relief Valves Spring Loaded
437 Specification Sheet
GENERAL
1 ■ Item No.: 9 ■ Basis of Selection: Code:
2 ■ Tag No.: ■ ASME VIII
3 ■ Customer: ■ PED 97/ 23 / EC (CE-marking) ■ Fire
4 ● Equipment: ■ other:
5 ● Enquiry/Order No.: 10 ■ Documentation: Material test report
6 ● Delivery time: ■ inlet body ■ outlet body
7 ● Number of valves: ■ other:
8 ● Number of spare valves:
SERVICE CONDITIONS
11 ■ Fluid and state: ■ Steam (S) ■ Gas (G) ■ Liquid (L) ■ Two phase
12 ■ Molecular weight: 20 ■ Set pressure / units:
13 ● Coefficient C: 21 ● Operating pressure / units:
14 ● Ratio of specific heats k: 22 ● Cold diff. set pressure / units:
15 ● Compressibility factor Z: 23 ■ Const. back pressure / units:
16 ■ Spec. gravity / units: 24 ■ Var. back pressure / units:
17 ● Viscosity / units: 25 ● Overpressure: ■ 10 % ■ ...... %
18 ■ Relieving temperature / units: 26 ● Blowdown: ■ 10 % ■ 20 %
19 ■ Required capacity / units: ■ ...... %
VALVE CONSTRUCTION
27 ● Orifice Designation:
28 ● Connection inlet Connection outlet
29 ● Size: Size:
30 ● Thread type or Flange class: Thread type or Flange class:
31 ● Facing type: ■ RF ■ RJ ■ other: Facing type: ■ RF ■ RJ ■ other:
MATERIALS
32 ● LESER Material Code ■ 3: Chrome steel ■ 4: Stainless steel
33 ● LESER Type: ■ 437 ■ 438 ■ 439 37 ● Soft seat ■ CR ■ NBR ■ EPDM
34 ■ Inlet body: seal: ■ FPM ■ FFKM ■ other:
35 ● Outlet body: 38 ● Spring: ■ high temp. alloy steel ■ carbon steel
36 ● Disc (Type 437): ■ SS hardened ■ 316L ■ stainless steel ■ other:
● ■ other: 39 ● Comply with NACE MR 0175 ■ Yes ■ No
ACCESSORIES AND OPTIONS
40 ■ Lifting lever: ■ packed H4 ■ cap H2
41 ● Others (specify):
SIZING AND SELECTION
42 ▲ Required orifice area / units:
■ Please fill in these fields in any case.
43 ▲ Selected orifice area / units:
● Please fill in these fields if possible.
44 ▲ Coeff. of discharge: ▲ These fields will be completed by the supplier.
45 ▲ Calculated capacity / units:
Order Code
4 3 .
Article No. Set Pressure Connections Options Documentation Code and
Medium
32 LWN 471.30
Threaded Safety Relief Valves Spring Loaded
Series 459
Series 459
40
Materials Type 459
18
Threaded Connections
19
Type 4593 Type 4592 Type 4594
Item Part Name SG Carbon Stainless 9
Iron Steel Steel
16
1 Inlet body SA 479 316L SA 479 316L SA 479 316L
2 Outlet body Gr. 60-40-18 SA 479 316L SA 479 316L 54
Hardened Hardened
7 Disc 316L 12
stainless steel stainless steel
AISI 430F AISI 430F 17
8 Guide 316L
tenifer tenifer
14
Carbon Steel
9 Bonnet Gr. 60-40-18 SA 479 316L
SA 105
60
12 Spindle AISI 420 AISI 420 316L
14 Split ring AISI 430F AISI 430F 316L 8
16/17 Spring plate Steel Steel 316L
57
Adjusting
AISI 430F AISI 430F 316L
18 screw with 61
PTFE PTFE PTFE
bushing
19 7
Lock nut Steel Steel 316L
40 Cap H2 Steel Steel 316L 2
Spring Carbon Carbon Stainless
1
standard Steel Steel Steel
Type 459
54
Spring High temp. High temp.
optional alloy steel or alloy steel or
stainless steel stainless steel
Schnitt 459 H2 male
57 Pin 316 316 316 40 4c
Flanged Version 9
1 Inlet body SA 479 316L SA 479 316L SA 479 316L 16
2 Outlet body Gr. 60-40-18 SA 479 316L SA 479 316L
2.1 54
Outlet adaptor 316L 316L 316L
2.2 Outlet flange 316L 316L 316L 12
48 Inlet flange 316L 316L 316L
17
2.2 2.1
14
60
57
61
48
Type 459
Flanged version
34 LWN 471.32
Threaded Safety Relief Valves Spring Loaded
Materials Type 459 – Balanced Bellows Design
18
Threaded Connections
19
Type 4593 Type 4592 Type 4594
Item Part Name SG Carbon Stainless 9
Iron Steel Steel
16
1 Inlet body SA 479 316L SA 479 316L SA 479 316L
2 Outlet body Gr. 60-40-18 SA 479 316L SA 479 316L 54
Hardened Hardened 12
7 Disc 316L
stainless steel stainless steel
AISI 430F AISI 430F 17
8 Guide 316L
tenifer tenifer
14
Carbon Steel
9 Bonnet Gr. 60-40-18 SA 479 316L
SA 105 60
11 Bonnet spacer SA 479 316L SA 479 316L SA 479 316L 11
12 Spindle AISI 420 AISI 420 316L
14 Split ring AISI 430F AISI 430F 316L 15
15 Bellows 316L 316L 316L 60
16 / 17 Spring plate Steel Steel 316L
57
Adjusting
AISI 430F AISI 430F 316L
18 screw with 61
PTFE PTFE PTFE
bushing
19 Lock nut Steel Steel 316L 7
40 Cap H2 Steel Steel 316L 2
Spring Carbon Carbon Stainless
1
standard Steel Steel Steel
Type 459
54 Balanced bellows design
Spring High temp. High temp.
optional alloy steel or alloy steel or
stainless steel stainless steel
Schnitt 459 H2 male SB
57 Pin 316 316 316 4c
Flanged Version
1 Inlet body SA 479 316L SA 479 316L SA 479 316L
2 Outlet body Gr. 60-40-18 SA 479 316L SA 479 316L
2.1 Outlet adaptor 316L 316L 316L
2.2 Outlet flange 316L 316L 316L
48 Inlet flange 316L 316L 316L
LWN 471.33 35
Series Threaded Safety Relief Valves Spring Loaded
459 Materials Type 462
40
Materials Type 462
18
Threaded Connections
19
Type 4623 Type 4622 Type 4624
Item Part Name SG Carbon Stainless 9
Iron Steel Steel
16
1 Inlet body SA 479 316L SA 479 316L SA 479 316L
2 Outlet body Gr. 60-40-18 SA 479 316L SA 479 316L 54
Disc with
7 316L 316L 316L 12
soft seal1
AISI 430F AISI 430F 17
8 Guide 316L
tenifer tenifer
Carbon Steel 14
9 Bonnet Gr. 60-40-18 SA 479 316L
SA 105
60
12 Spindle AISI 420 AISI 420 316L
14 Split ring AISI 430F AISI 430F 316L 8
16 Spring plate Steel Steel 316L
57
Adjusting
AISI 430F AISI 430F 316L
18 screw with 61
PTFE PTFE PTFE
bushing
7
19 Lock nut Steel Steel 316L
40 Cap H2 Steel Steel 316L 2
Spring Carbon Carbon Stainless
1
standard Steel Steel Steel Type 462
54
Spring High temp. High temp.
optional alloy steel or alloy steel or
stainless steel stainless steel
Schnitt 462 H2 male
57 Pin 316 316 316 4c
Flanged Version 9
1 Inlet body SA 479 316L SA 479 316L SA 479 316L
16
2 Outlet body Gr. 60-40-18 SA 479 316L SA 479 316L
2.1 Outlet adaptor 316L 316L 316L
54
2.2 Outlet flange 316L 316L 316L
48 Inlet flange 316L 316L 316L 12
Note: 1CR – Neoprene 2.2 2.1
NBR – Nitrile 17
EPDM – Ethylene / Propylene
FPM – Fluorocarbon
60
FFKM – Kalrez®
48
Type 462
Flanged version
36 LWN 471.34
Threaded Safety Relief Valves Spring Loaded
Materials Type 462 – Balanced Bellows Design
18
Threaded Connections
19
Type 4623 Type 4622 Type 4624
Item Part Name SG Carbon Stainless 9
Iron Steel Steel
16
1 Inlet body SA 479 316L SA 479 316L SA 479 316L
2 Outlet body Gr. 60-40-18 SA 479 316L SA 479 316L 54
Disc with
7 316L 316L 316L 12
soft seal1
AISI 430F AISI 430F 17
8 Guide 316L
tenifer tenifer
14
CarbonSteel
9 Bonnet Gr. 60-40-18 SA 479 316L
SA 105 60
11 Bonnet spacer SA 479 316L SA 479 316L SA 479 316L
11
12 Spindle AISI 420 AISI 420 316L
14 Split ring AISI 430F AISI 430F 316L 15
15 Bellows 316L 316L 316L
60
16 / 17 Spring plate Steel Steel 316L
Adjusting 57
AISI 430F AISI 430F 316L
18 screw with
PTFE PTFE PTFE 61
bushing
19 Lock nut Steel Steel 316L 7
40 Cap H2 Steel Steel 316L
2
Spring Carbon Carbon Stainless
1
standard Steel Steel Steel
54 Type 462
Spring High temp. High temp. Balanced bellows design
optional alloy steel or alloy steel or
stainless steel stainless steel
57 Pin 316 316 316 Schnitt 462 H2 male SB
4c
Flanged Version
1 Inlet body SA 479 316L SA 479 316L SA 479 316L
2 Outlet body Gr. 60-40-18 SA 479 316L SA 479 316L
2.1 Outlet adaptor 316L 316L 316L
2.2 Outlet flange 316L 316L 316L
48 Inlet flange 316L 316L 316L
LWN 471.35 37
Series Threaded Safety Relief Valves Spring Loaded
459 Materials Type 459 · Heavy Duty Design
40
Materials Type 459 Heavy Duty Design
18
Threaded Connections
19
Type 4594 9
Item Part Name
Stainless Steel
16
1 Inlet body SA 479 316L
2 Outlet body SA 479 316L 54
7 Disc 316L
12
8 Guide 316L
9 Bonnet SA 479 316L 17
12 Spindle 316L
14 Split ring 316L 14
16/17 Spring plate 316L
60
Adjusting screw 316L
18
with bushing PTFE 8
19 Lock nut 316L
57
40 Cap H2 316L
54 Spring Stainless Steel 61
57 Pin 316
60 Gasket Graphite / 316L 7
61 Ball 316 2
1
Type 459
Heavy duty design
40
18
19
16
54
12
17
14
60
11
15
60
57
61
Type 459
Heavy duty design with
38
balanced bellows LWN 471.36
Threaded Safety Relief Valves Spring Loaded
Material Options Type 4594
7 Disc
11 Bonnet spacer
15 Bellows1
57 Pin
61 Ball
Note: 1 Available in 316L, Duplex®, Hastelloy®, Inconel®, Monel®. Other materials on request.
LWN 471.37 39
Series Threaded Safety Relief Valves Spring Loaded
459 How to Order – Numbering System
How to Order
Numbering System
1 Article Number
2 Set Pressure
3 Connections
Type
Types of sealing
459 462
Metal seat
Metal-to-metal ✓
Metal-to-metal stellited ✓
Soft seat
EPDM ✓
NBR ✓
CR ✓
FFKM (Kalrez®) ✓
FKM (Viton®) ✓
Plastic seat
SP Vespel-SP1 ✓
PCTFE Kel-F ✓
PTDE-FDA Teflon ✓
2 Material Code
2 – Body Material Carbon Steel
3 – Body Material SG iron
4 – Body Material Stainless Steel
3
Valve Code
Identifies valve size,
body material and orifice,
refer to page 14.
4
Code for lifting device
2 – Screwed cap H2
3 – Plain lever H3
4 – Packed lever H4
40 LWN 471.38
Threaded Safety Relief Valves Spring Loaded
How to Order – Numbering System
4 Options
5 Documentation
6
Code and Medium
LWN 471.39 41
Series Threaded Safety Relief Valves Spring Loaded
459 How to Order · Article Numbers
How to order
42 LWN 471.40
Threaded Safety Relief Valves Spring Loaded
How to Order · Available Connections
3 3 3
/4” V62 V62 V62 – /4” V59 V59 V59 V59 /4” – – – –
1” V63 V63 V63 V63 1” V60 V60 V60 V60 1” V71 V71 V71 –
Size ANSI-Class 0.044 0.099 0.206 0.373 Size ANSI-Class 0.044 0.099 0.206 0.373
150 V01 V01 – – – – – – –
1 ” 300 / 600 V02 V02 – – – – – – –
/2 –
900 / 1500 V03 V03 – – – – – – –
2500 V04 V04 – – – – – – –
150 V05 V05 V05 V05 – – – – –
3 ” 300 / 600 V06 V06 V06 V06 – – – – –
/4 –
900 / 1500 V07 V07 V07 V07 – – – – –
2500 V08 V08 V08 V08 – – – – –
150 V09 V09 V09 V09 150 V18 V18 V18 –
300 / 600 V10 V10 V10 V10 300 / 6001 V19 V19 V19 –
1” 1”
900 / 1500 V11 V11 V11 V11 9002 V20 V20 V20 –
2500 V12 V12 V12 V12 – – – – –
– – – – – 150 – V21 V21 V21
11/2” – – – – – 11/2” 300 / 600 – V22 V22 V22
– – – – – 900 – V23 V23 V23
Notes: 1 maximum inlet flange class: #1500
2 extended center to face dimension outlet: 4 3/4” (120 mm)
LWN 471.41 43
Series Threaded Safety Relief Valves Spring Loaded
459 Dimensions and Weights Type 459 / 462
44 LWN 471.42
Threaded Safety Relief Valves Spring Loaded
Dimensions and Weights Type 459 / 462 · Flange Thickness
Connection Class Class Class Class Connection Class Class Class Class
Size 150 300/600 900/1500 2500 Size 150 300/600 900/1500 2500
[Inch] [Inch]
s s s s s s s s
1 5 15 1
1 /4 7
1 /16 1
/2” /8 /16 /2” 17 25 33 37
3 11 15 1 1/4 1 1/2 3
/4” /16 /16 /4” 17 25 32 39
3 1 1/8 1 9/16 1 5/8
1” /4 1” 19 28 39 42
11/2” 15
/16 1 3/16 1 9/16 2 11/2” 24 31 40 53
LWN 471.43 45
Series Threaded Safety Relief Valves Spring Loaded
459 Pressure Temperature Ratings US Units – Type 459 / 462
46 LWN 471.44
Threaded Safety Relief Valves Spring Loaded
Pressure Temperature Ratings Metric Units – Type 459 / 462
LWN 471.45 47
Series Threaded Safety Relief Valves Spring Loaded
459 Accessories and Options · Caps and Levers
12
2
14
6
25
13
24 3b
1
23
22
23
24
10
93 93.5
12
14
13
1.5
1.6
24
3a
23
1.8
1.7
BLOCKED.
Remove after
1.10 testing!
1.11
1.9
1.4
LWN 471.47 49
Series Threaded Safety Relief Valves Spring Loaded
459 Accessories and Options · Balanced Bellows
Balanced Bellows
Application
Bellows protect the guides, moving Materials and Limits of Application
parts and the spring from dirt, corros-
ion, impurities or temperature to guar- Standard Heavy Duty Hastelloy® Inconel®
antee the proper function of the safety Bellows material 316L 316L Hastelloy® C Inconel®
relief valve. Additionally they provide Bellows joint materials 316L 316L Hastelloy® C Inconel®
for back pressure compensation 1.
J81 J78 + S15
Option codes J78 J78 + J55
(Hastelloy®) (Inconel®)
Design
Minimum 43.5 psig 580 psig
Series 459 with balanced bellows is set pressure limit
provided with a bonnet spacer to
house the bellows. The spacer serves acc. to set
Maximum
580 psig pressure limit
for cooling and shields the bellows set pressure limit
of the valve
against turbulences during discharge
to avoid vibration and to guarantee Superimposed 232 psig 580 psig
back pressure limit 3
longer lifetime.
Built up max. 35 % of set pressure, not to exceed
back pressure limit 3 the maximum bellows back pressure limit
Temperature limits
(Type 459) up to 752 °F
Note s: 1 The bellows for type 459/462 is back pressure compensating for orifice size 0.206 Inch2
(133 mm2). It is over compensating for orifice size 0.099 Inch2 (63,6 mm2) and under compensating
for orifice size 0.373 Inch2 (241 mm2). Please ask factory for details.
2 Type 4594 with heavy duty body: up to 1022 °F, the temperature limits for type 462 depend on
pressure relief valve is ensured. The superimposed back pressure limit of a bellows refers only
to the static stability of the bellows design and does not consider the influence of the backpressure
on the opening and closing of a pressure relief valve.
50 LWN 471.48
Threaded Safety Relief Valves Spring Loaded
Accessories and Options · Metal Seat
Type 4594
Disc and seat are provided in 316L
material for highest corrosion resist-
ance. Any other material which is avail-
able from bar stock can be supplied as
well (e.g. Hastelloy®, Monel®,
Alloy20,…).
Metal seat Stellited sealing surfaces
LWN 471.49 51
Series Threaded Safety Relief Valves Spring Loaded
459 Accessories and Options · Soft Seal
Soft Seal
O-ring disc (Type 462)
Disc with sealing plate (Type 459, optional)
Application
Type 459 and 462 are provided with a
soft seal disc for
● superior tightness
● maintained tightness close to the 57
set pressure 57
2
Features and Benefits 2
● two designs with o-ring or sealing 3
plate for extended application range 3
● minimized leakage and product loss
1
● large selection of soft seal materials 1
● simple replacement of soft seal
4
● standard ARP o-ring sizes 4
● reduced maintenance costs
● one standard durometer per o-ring
material
52 LWN 471.50
Threaded Safety Relief Valves Spring Loaded
Accessories and Options · Soft Seal
Teflon®
PTFE (Polytetra- A J44 -300 -184 302 150 Nearly all chemicals
fluoroethylene)
Other Please contact LESER LLC
Notes: 1 The code letters will be stamped on the retainer (Item 2). For soft seal materials other than listed the code letter X will be used.
2 Pressure and temperature service must be considered in any case.
LWN 471.51 53
Series Threaded Safety Relief Valves Spring Loaded
459 Accessories and Options · Heating Jacket
Heating Jacket
Application
Pressure relief valves in systems to be
protected from media which are vis-
cous, sticky or have a tendency to
crystallize out of solution can be fitted
with a heating jacket.
For type 459 the outlet body is fitted
with a fabricated heating jacket. The
position of the heating connections is
shown in the drawing.
Operating Operating
Pressure Temperatures
pmax Tmax
54 LWN 471.52
Threaded Safety Relief Valves Spring Loaded
Accessories and Options · Lift Indicator
Lift Indicator
(proximity switch)
A = closed position
B = open position
LWN 471.53 55
Series Threaded Safety Relief Valves Spring Loaded
459 Spare Parts · Discs
Spare Parts
56 LWN 471.54
Threaded Safety Relief Valves Spring Loaded
Spare Parts · Inlet Bodies · Inlet Bodies and Flanges · Bellows · Gaskets
Size Orifice [Inch2 ] Inlet Body Size Orifice [Inch2 ] Inlet Body
1 ” 1 ”
/2 136.6969.9204 /2 136.6969.9211
3 ” 3 ”
/4 0.044 136.7069.9204 /4 0.044 136.7069.9211
1” 136.7169.9204 1” 136.7169.9211
3 ” 136.7549.9204 3 ”
/4 /4 136.7549.9211
1” 0.099 136.7649.9204 1” 0.099 136.7649.9211
11/2” 136.7849.9204 11/2” 136.7849.9211
3 ” 136.8049.9204 3 ”
/4 /4 136.8049.9211
1” 0.206 136.8149.9204 1” 0.206 136.8149.9211
11/2” 136.8349.9204 11/2” 136.8349.9211
1” 136.3649.9204 1” 136.3649.9211
0.373 0.373
11/2” 136.8649.9204 11/2” 136.8649.9211
Note: 1 The bellows for type 459 / 462 is back pressure compensating for orifice size 0.206 In2 (133 mm2).
LWN 471.55 57
Series Threaded Safety Relief Valves Spring Loaded
459 Approvals Series 459
S/G 0.81
0.044
L 0.70
S/G 0.83
0.099
PED 97/23/EC L 072020111 0.61
Europe 459 / 462
(CE-marking) S/G Z0008/0/13 0.81
0.206
L 0.53 2
S/G 0.79
0.373
L 0.52
αw
S/G 0.81
0.044
L 0.70
S/G 0.83
Germany 0.099
AD 2000- L 0.61
459 / 462 TUEV-SV 909
Merkblatt A2 S/G 0.81
0.206
L 0.53 2
S/G 0.79
0.373
L 0.52
China: SELO / AQSIQ (SQLBPV)
Russia: DIN GOST
Others
Ship classifica-
BV, DNV, GL, LROS, RINA
tion authorities:
Note: 1 Acc. to ASME Sec. VIII the certified coefficient of discharge K is calculated by K = 0.9 * KD
For sizing acc. to ASME Sec. VIII K must be used in the sizing equations.
dr = 0.61 / α w = 0.61
2 Type 462: K
58 LWN 471.56
Threaded Safety Relief Valves Spring Loaded
Capacities US Units / Metric Units · STEAM
Capacities for saturated steam according to ASME Section VIII (UV), based on set pressure plus 10 % overpressure.
Capacities at 30 psig (2.07 bar) and bellow are based on 3 psig (0.207 bar) overpressure.
LWN 471.57 59
Series Threaded Safety Relief Valves Spring Loaded
459 Capacities US Units / Metric Units · AIR
Capacities for air according to ASME Section VIII (UV), based on set pressure plus 10 % overpressure at 60 °F (16 °C).
Capacities at 30 psig (2.07 bar) and below are based on 3 psig (0.207 bar) overpressure.
60 LWN 471.58
Threaded Safety Relief Valves Spring Loaded
Capacities US Units / Metric Units · WATER
Capacities for water according to ASME Section VIII (UV), based on set pressure plus 10 % overpressure at 68 °F (20 °C).
Capacities at 30 psig (2.07 bar) and below are based on 3 psig (0.207 bar) overpressure.
LWN 471.59 61
Series Threaded Safety Relief Valves Spring Loaded
459 Specification Sheet
LESER Headquarter
1818 – 1914
Compact Performance Catalog
Edition July 2005
LWN 471.01-471.60 / 07.2005 / 3000
Línea del producto : W22 Super Premium Efficiency Código del 11792472
Trifásico producto :
Catalog # : 06018EG3E364T-W22
Delantero Trasero
Tipo de cojinete : 6314 C3 6314 C3
____ Sello : WSeal WSeal
Intervalo de lubricación : 12000 h 12000 h
Cantidad de lubricante : 27 g 27 g
Tipo de lubricante : Mobil Polyrex EM
Notas
Esta revisión substitui y cancela la anterior, la cual deberá Los valores indicados son valores promedio con base en
ser eliminada. ensayos y para alimentación en red senoidal, sujeitos a las
(1) Mirando la punta delantera del eje del motor. tolerancias de la norma NEMA MG-1.
(2) Medido a 1m y con tolerancia de +3dB(A).
(3) Masa aproximada sujetos a cambios después del
proceso de fabricación.
(4) Al 100% de la carga completa.
Rev. Resumen de los cambios Ejecutado Verificado Fecha
Ejecutor
Verificador Pagina Revisión
Fecha 08/03/2021 1/6
Propriedad de WEG S/A. Prohibida la reproducción sin permiso.
Sujeto a cambios sin previo aviso
CURVA DE PAR Y CORRIENTE X ROTACIÓN
Motor Trifásico de Inducción - Rotor de Jaula
Cliente : Strotech
Línea del producto : W22 Super Premium Efficiency Código del 11792472
Trifásico producto :
Catalog # : 06018EG3E364T-W22
____
Desempeño : 230/460 V 60 Hz 4P
Corriente nominal : 140/70.2 A Momento de inercia (J) : 16.9 sq.ft.lb
Ip/In : 8.5 Régimen de servicio : Cont.(S1)
Torque nominal : 177 ft.lb Clase de aislamiento :F
Torque de arranque : 270 % Factor de servicio : 1.25
Torque máximo : 320 % Elevación de : 80 K
temperatura<sup>4</sup>
Rotación nominal : 1780 rpm Categoría :A
Ejecutor
Verificador Pagina Revisión
Fecha 08/03/2021 2/6
Propriedad de WEG S/A. Prohibida la reproducción sin permiso.
Sujeto a cambios sin previo aviso
CURVA DE DESEMPEÑO EN CARGA
Motor Trifásico de Inducción - Rotor de Jaula
Cliente : Strotech
Línea del producto : W22 Super Premium Efficiency Código del 11792472
Trifásico producto :
Catalog # : 06018EG3E364T-W22
____
Desempeño : 230/460 V 60 Hz 4P
Corriente nominal : 140/70.2 A Momento de inercia (J) : 16.9 sq.ft.lb
Ip/In : 8.5 Régimen de servicio : Cont.(S1)
Torque nominal : 177 ft.lb Clase de aislamiento :F
Torque de arranque : 270 % Factor de servicio : 1.25
Torque máximo : 320 % Elevación de : 80 K
temperatura<sup>4</sup>
Rotación nominal : 1780 rpm Categoría :A
Rev. Resumen de los cambios Ejecutado Verificado Fecha
Ejecutor
Verificador Pagina Revisión
Fecha 08/03/2021 3/6
Propriedad de WEG S/A. Prohibida la reproducción sin permiso.
Sujeto a cambios sin previo aviso
CURVA DE LÍMITE TÉRMICO
Motor Trifásico de Inducción - Rotor de Jaula
Cliente : Strotech
Línea del producto : W22 Super Premium Efficiency Código del 11792472
Trifásico producto :
Catalog # : 06018EG3E364T-W22
____
Desempeño : 230/460 V 60 Hz 4P
Corriente nominal : 140/70.2 A Momento de inercia (J) : 16.9 sq.ft.lb
Ip/In : 8.5 Régimen de servicio : Cont.(S1)
Torque nominal : 177 ft.lb Clase de aislamiento :F
Torque de arranque : 270 % Factor de servicio : 1.25
Torque máximo : 320 % Elevación de : 80 K
temperatura<sup>4</sup>
Rotación nominal : 1780 rpm Categoría :A
Constante de calentamiento
Constante de enfriamento
Rev. Resumen de los cambios Ejecutado Verificado Fecha
Ejecutor
Verificador Pagina Revisión
Fecha 08/03/2021 4/6
Propriedad de WEG S/A. Prohibida la reproducción sin permiso.
Sujeto a cambios sin previo aviso
CURVA DE LÍMITE TÉRMICO
Motor Trifásico de Inducción - Rotor de Jaula
Cliente : Strotech
____
Ejecutor
Verificador Pagina Revisión
Fecha 08/03/2021 5/6
Propriedad de WEG S/A. Prohibida la reproducción sin permiso.
Sujeto a cambios sin previo aviso
CURVA DE OPERACIÓN COM INVERSOR
Motor Trifásico de Inducción - Rotor de Jaula
Cliente : Strotech
Línea del producto : W22 Super Premium Efficiency Código del 11792472
Trifásico producto :
Catalog # : 06018EG3E364T-W22
____
Desempeño : 230/460 V 60 Hz 4P
Corriente nominal : 140/70.2 A Momento de inercia (J) : 16.9 sq.ft.lb
Ip/In : 8.5 Régimen de servicio : Cont.(S1)
Torque nominal : 177 ft.lb Clase de aislamiento :F
Torque de arranque : 270 % Factor de servicio : 1.25
Torque máximo : 320 % Elevación de : 80 K
temperatura<sup>4</sup>
Rotación nominal : 1780 rpm Categoría :A
Rev. Resumen de los cambios Ejecutado Verificado Fecha
Ejecutor
Verificador Pagina Revisión
Fecha 08/03/2021 6/6
Propriedad de WEG S/A. Prohibida la reproducción sin permiso.
Sujeto a cambios sin previo aviso
HOJA DE DATOS
Motor Trifásico de Inducción - Rotor de Jaula
Cliente :
Línea del producto : W22 NEMA Premium Efficiency Código del 12378663
Trifásico producto :
Catalog # : 00136ET3E143T-W22
Delantero Trasero
Tipo de cojinete : 6205 ZZ 6204 ZZ
Sello : V'Ring V'Ring
____ Intervalo de lubricación : - -
Cantidad de lubricante : - -
Tipo de lubricante : Mobil Polyrex EM
Notas
USABLE @208V 3.16A SF 1.15 SFA 3.64A
Esta revisión substitui y cancela la anterior, la cual deberá Los valores indicados son valores promedio con base en
ser eliminada. ensayos y para alimentación en red senoidal, sujeitos a las
(1) Mirando la punta delantera del eje del motor. tolerancias de la norma NEMA MG-1.
(2) Medido a 1m y con tolerancia de +3dB(A).
(3) Masa aproximada sujetos a cambios después del
proceso de fabricación.
(4) Al 100% de la carga completa.
Rev. Resumen de los cambios Ejecutado Verificado Fecha
Ejecutor
Verificador Pagina Revisión
Fecha 08/03/2021 1/6
Propriedad de WEG S/A. Prohibida la reproducción sin permiso.
Sujeto a cambios sin previo aviso
CURVA DE PAR Y CORRIENTE X ROTACIÓN
Motor Trifásico de Inducción - Rotor de Jaula
Cliente :
Línea del producto : W22 NEMA Premium Efficiency Código del 12378663
Trifásico producto :
Catalog # : 00136ET3E143T-W22
____
Desempeño : 230/460 V 60 Hz 2P
Corriente nominal : 2.88/1.44 A Momento de inercia (J) : 0.0332 sq.ft.lb
Ip/In : 8.2 Régimen de servicio : Cont.(S1)
Torque nominal : 1.50 ft.lb Clase de aislamiento :F
Torque de arranque : 320 % Factor de servicio : 1.25
Torque máximo : 400 % Elevación de : 80 K
temperatura<sup>4</sup>
Rotación nominal : 3500 rpm
Ejecutor
Verificador Pagina Revisión
Fecha 08/03/2021 2/6
Propriedad de WEG S/A. Prohibida la reproducción sin permiso.
Sujeto a cambios sin previo aviso
CURVA DE DESEMPEÑO EN CARGA
Motor Trifásico de Inducción - Rotor de Jaula
Cliente :
Línea del producto : W22 NEMA Premium Efficiency Código del 12378663
Trifásico producto :
Catalog # : 00136ET3E143T-W22
____
Desempeño : 230/460 V 60 Hz 2P
Corriente nominal : 2.88/1.44 A Momento de inercia (J) : 0.0332 sq.ft.lb
Ip/In : 8.2 Régimen de servicio : Cont.(S1)
Torque nominal : 1.50 ft.lb Clase de aislamiento :F
Torque de arranque : 320 % Factor de servicio : 1.25
Torque máximo : 400 % Elevación de : 80 K
temperatura<sup>4</sup>
Rotación nominal : 3500 rpm
Rev. Resumen de los cambios Ejecutado Verificado Fecha
Ejecutor
Verificador Pagina Revisión
Fecha 08/03/2021 3/6
Propriedad de WEG S/A. Prohibida la reproducción sin permiso.
Sujeto a cambios sin previo aviso
CURVA DE LÍMITE TÉRMICO
Motor Trifásico de Inducción - Rotor de Jaula
Cliente :
Línea del producto : W22 NEMA Premium Efficiency Código del 12378663
Trifásico producto :
Catalog # : 00136ET3E143T-W22
____
Desempeño : 230/460 V 60 Hz 2P
Corriente nominal : 2.88/1.44 A Momento de inercia (J) : 0.0332 sq.ft.lb
Ip/In : 8.2 Régimen de servicio : Cont.(S1)
Torque nominal : 1.50 ft.lb Clase de aislamiento :F
Torque de arranque : 320 % Factor de servicio : 1.25
Torque máximo : 400 % Elevación de : 80 K
temperatura<sup>4</sup>
Rotación nominal : 3500 rpm
Constante de calentamiento
Constante de enfriamento
Rev. Resumen de los cambios Ejecutado Verificado Fecha
Ejecutor
Verificador Pagina Revisión
Fecha 08/03/2021 4/6
Propriedad de WEG S/A. Prohibida la reproducción sin permiso.
Sujeto a cambios sin previo aviso
CURVA DE LÍMITE TÉRMICO
Motor Trifásico de Inducción - Rotor de Jaula
Cliente :
____
Ejecutor
Verificador Pagina Revisión
Fecha 08/03/2021 5/6
Propriedad de WEG S/A. Prohibida la reproducción sin permiso.
Sujeto a cambios sin previo aviso
CURVA DE OPERACIÓN COM INVERSOR
Motor Trifásico de Inducción - Rotor de Jaula
Cliente :
Línea del producto : W22 NEMA Premium Efficiency Código del 12378663
Trifásico producto :
Catalog # : 00136ET3E143T-W22
____
Desempeño : 230/460 V 60 Hz 2P
Corriente nominal : 2.88/1.44 A Momento de inercia (J) : 0.0332 sq.ft.lb
Ip/In : 8.2 Régimen de servicio : Cont.(S1)
Torque nominal : 1.50 ft.lb Clase de aislamiento :F
Torque de arranque : 320 % Factor de servicio : 1.25
Torque máximo : 400 % Elevación de : 80 K
temperatura<sup>4</sup>
Rotación nominal : 3500 rpm
Rev. Resumen de los cambios Ejecutado Verificado Fecha
Ejecutor
Verificador Pagina Revisión
Fecha 08/03/2021 6/6
Propriedad de WEG S/A. Prohibida la reproducción sin permiso.
Sujeto a cambios sin previo aviso
WEG Standard Product Catalog
Electrical and Mechanical Data
2020
Electrical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-1
Electrical Data Electrical Data
Single-Phase
Single-Phase Wiring
Wiring Diagrams
Diagrams
ALWAYS USE WIRING DIAGRAM SUPPLIED ON MOTOR NAMEPLATE
ALWAYS USE WIRING DIAGRAM SUPPLIED ON MOTOR NAMEPLATE
Electrical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-3
Electrical Data
Three-Phase Wiring Diagrams
ALWAYS USE WIRING DIAGRAM SUPPLIED ON MOTOR NAMEPLATE
colored leads are only applicable on the NEW ROLLED STEEL motor lines
$
MFBET
\n n n +n \n ' ,n ,n ',n
7BMJEGPSWPMUBHF$PEF& (
'SBNFTBOEGPS&DPEF g
h
FYDFQU'JSF1VNQNPUPST
_n -
n Nn Nn _n => n =>n =>n
Sn1n n 1n 0n n 1n
n 2n 1n
5M#-6 58)5 53( 5:&- 54#-,
5(3: 51/, 543&% 5#3,3&%
8:&%&-5"-0870-5"(& 8:&%&-5")*()70-5"(&
MFBET
7BMJEGPSWPMUBHFDPEF& GGK FK
'SBNFTBOEBCPWF K U K
a9 n a9
K a;K
O
K Z
'JSF1VNQ.PUPSTBMMGSBNFT
7BMJEGPSWPMUBHFDPEF7
"MMGSBNFT
In
> >
l Pn injn
T
>
>>
QK Qn W?K X9K M
.PUPSTBSFDBQBCMFPG8:&%FMUBTUBSU WPOMZ
$$$ $ $ ""$ $$ $ $
.PUPSTBSFDBQBCMFPGQBSUXJOEJOHTUBSUBUUIFMPX 5Mr#-6 58)5 53( 5:&- 54r#-, 5(3: 51/,
5#3&% 5#3,3&% 5M0$633: 5MM(3/ 5M7-5
5Mr#-6 58)5 53( 5r:&- 54r#-, 5r(3: 5r1/,
5#3&% 5#3,3&% 5M0$633: 5MM(3/ 5M7-5
WPMUBHF >>>>>>ºººººººººº
8:&%&-5" $$ 1"358*/%*/(
MFBET
7BMJEGPSWPMUBHF$PEF(
GnGK FK
'SBNFTBOEBCPWF K K K K
]n )n n
n 4n
nK
n V
9 n @
K ;K
K bn cn dn
R !m
.PUPSTBSFDBQBCMFPG8:&%FMUBTUBSU.PUPSTBSF
DBQBCMFPGQBSUXJOEJOHTUBSU
kl
nQK QK Qn X9K Y9K M QK Qn
$$$ $ $ ""$ $$ $ $ $$$ $ $
5Mr#-6 58)5 53( 5:&-54r#-, 5(3:51/, 5Mr#-6 58)5 53( 5:&- 54r#-, 5(3: 51/,
5#3&% 5#3,3&% 5M0$633: 5MM(3/ 5M7-5 5#3&% 5#3,3&% 5M0$633: 5MM(3/ 5M7-5
*&&&NPEFMT
1nn 1n 1n 1nn 2n 1n 1nn 2n 1n 1nn 2n 1n
n Hn,*%AK471:K n 23Gn Hn &*%&n
5Mr#-6 58)5 53( F32A#%$n F31B#%$n
5:&- 54#-, 5(3:
%0-
MFBET
7BMJEGPSWPMUBHF$PEF2BOE)DPEFT
"MMGSBNFT
2BOE)DPEFT
OPO*&&&NPUPST
DBOBMTPIBWF
MFBET
B-4 www.weg.net Data subject to change without notice.
Inertia J (lb-ft2)
Service Factor
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Locked locked
Weight (lb)
Output % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Rotor Current rotor
Full load
(rpm)
time (s) Efficiency Power Factor
143/5T 1.46 L 8.5 2.3 2.7 0.0527 7 15 0.0 69.0 1.15 3540 58.0 67.0 70.0 0.95 0.96 0.97 2.40
1 0.75 143/5T 2.93 L 8.4 2.7 3.0 0.1303 7 15 0.0 58.0 1.15 1770 59.0 68.0 72.0 0.84 0.90 0.92 2.45
143/5T 4.43 K 6.3 2.0 2.4 0.1561 15 33 0.0 58.0 1.00 1170 59.6 68.2 70.0 0.70 0.78 0.83 2.80
143/5T 2.21 J 7.3 2.3 2.4 0.0470 11 24 0.0 69.0 1.15 3520 67.0 72.0 74.0 0.91 0.94 0.95 3.40
1.5 1.1 143/5T 4.42 J 8.0 2.6 2.4 0.1628 6 13 0.0 58.0 1.15 1760 65.0 73.0 77.0 0.99 0.99 0.99 3.13
182/4T 6.56 M 8.2 2.5 3.2 0.5657 10 22 0.0 60.0 1.00 1185 58.4 67.3 72.0 0.62 0.72 0.78 4.25
143/5T 2.94 K 8.0 2.4 2.8 0.0527 7 15 0.0 69.0 1.15 3530 66.0 74.0 77.0 0.87 0.92 0.94 4.50
143/5T 5.94 J 7.4 2.7 2.4 0.1497 8 18 0.0 58.0 1.15 1745 68.5 75.5 78.5 0.89 0.94 0.95 4.38
2 1.5
182/4T 5.96 H 7.4 2.9 2.3 0.2957 8 18 0.0 60.0 1.15 1740 69.0 76.5 80.0 0.99 0.99 0.99 4.10
182/4T 8.78 L 8.0 2.4 2.7 0.5223 14 31 0.0 60.0 1.00 1180 65.2 73.0 77.0 0.72 0.81 0.85 5.00
182/4T 4.42 H 7.7 2.5 2.6 0.1571 9 20 0.0 72.0 1.15 3520 80.0 83.0 84.0 0.97 0.98 0.98 5.80
143/5T 4.42 H 7.2 2.2 2.4 0.0664 7 15 0.0 69.0 1.15 3515 72.5 76.0 78.5 0.96 0.97 0.97 6.25
3 2.2
182/4T 8.91 H 7.5 2.9 2.6 0.3735 6 13 0.0 60.0 1.15 1745 71.0 78.0 80.0 0.99 0.99 0.99 6.00
213/5T 13.3 J 7.5 2.1 2.1 1.28 5 11 0.0 63.0 1.00 1170 69.3 76.7 80.0 0.93 0.96 0.96 6.20
182/4T 7.37 G 7.1 2.8 2.5 0.2164 7 15 0.0 72.0 1.15 3515 80.0 84.0 85.5 0.96 0.99 0.99 9.50
213/5T 14.8 H 6.7 3.3 2.6 0.7124 7 15 0.0 63.0 1.15 1745 72.5 78.5 80.0 0.91 0.95 0.96 10.5
5 3.7
182/4T 15.0 G 6.5 2.8 2.6 0.4357 7 15 0.0 60.0 1.15 1730 72.5 78.5 80.0 0.93 0.95 0.96 10.5
213/5T 22.0 J 8.4 2.5 2.5 1.98 14 31 0.0 63.0 1.00 1175 78.9 83.9 82.5 0.91 0.94 0.94 10.4
213/5T 11.1 P 7.2 2.8 2.9 0.5550 7 15 0.0 72.0 1.15 3510 81.5 85.5 86.5 0.99 0.99 0.99 29.8
7.5 5.5 182/4T 11.1 H 7.5 2.8 2.6 0.2164 9 20 0.0 72.0 1.15 3505 79.0 83.5 85.5 0.99 0.99 0.99 14.1
213/5T 22.2 H 7.0 3.3 2.7 1.09 7 15 0.0 63.0 1.15 1750 76.0 81.0 82.5 0.94 0.96 0.97 14.9
213/5T 14.7 N 7.0 2.3 2.9 0.5285 8 18 0.0 72.0 1.15 3515 82.0 85.5 86.5 0.99 0.99 0.99 38.8
10 7.5
213/5T 29.8 G 6.7 2.6 2.5 1.15 13 29 0.0 63.0 1.15 1740 78.0 82.0 82.5 0.90 0.95 0.97 20.4
12.5 9.2 213/5T 18.5 G 7.3 2.1 2.8 0.6763 8 18 0.0 72.0 1.15 3510 86.0 88.0 88.5 0.98 0.98 0.98 23.0
Electrical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-5
Electrical Data
Single Phase - General Purpose - TEFC - Rolled Steel - Standard Efficiency
230 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
W56 0.180 R 6.0 3.0 3.0 0.0126 18 40 15.4 66.0 1.15 3475 28.0 35.0 42.0 0.64 0.70 0.75 1.30
48 0.180 R 6.0 3.0 3.0 0.0126 18 40 15.4 66.0 1.15 3475 28.0 35.0 42.0 0.64 0.70 0.75 1.30
W56 0.360 P 4.8 3.2 3.0 0.0240 26 57 14.8 52.0 1.15 1740 37.0 45.0 51.0 0.41 0.48 0.55 1.45
0.12 0.09 W56 0.360 P 4.8 3.2 3.0 0.0240 26 57 14.8 52.0 1.15 1740 37.0 45.0 51.0 0.41 0.48 0.55 1.45
48 0.360 P 4.8 3.2 3.0 0.0240 26 57 14.8 52.0 1.15 1740 37.0 45.0 51.0 0.41 0.48 0.55 1.45
W56 0.530 M 5.2 1.8 2.4 0.0318 20 44 16.5 52.0 1.15 1165 36.0 46.0 52.0 0.61 0.68 0.73 1.05
48 0.530 M 5.2 1.8 2.4 0.0318 20 44 16.5 52.0 1.15 1165 36.0 46.0 52.0 0.61 0.68 0.73 1.05
W56 0.240 P 6.0 3.0 3.0 0.0126 14 31 15.4 66.0 1.15 3480 30.0 38.0 44.0 0.60 0.67 0.73 1.60
48 0.240 P 6.0 3.0 3.0 0.0126 14 31 15.4 66.0 1.15 3480 30.0 38.0 44.0 0.60 0.67 0.73 1.60
W56 0.480 P 5.4 3.2 2.9 0.0280 16 35 15.7 52.0 1.15 1735 38.0 46.0 52.0 0.44 0.52 0.59 1.70
0.16 0.12 W56 0.480 P 5.4 3.2 2.9 0.0280 16 35 15.7 52.0 1.15 1735 38.0 46.0 52.0 0.44 0.52 0.59 1.70
48 0.480 P 5.4 3.2 2.9 0.0280 16 35 15.7 52.0 1.15 1735 38.0 46.0 52.0 0.44 0.52 0.59 1.70
W56 0.710 L 5.6 1.8 2.3 0.0358 20 44 17.6 52.0 1.15 1165 40.0 50.0 56.0 0.67 0.74 0.78 1.20
48 0.710 L 5.6 1.8 2.3 0.0358 20 44 17.6 52.0 1.15 1165 40.0 50.0 56.0 0.67 0.74 0.78 1.20
W56 0.370 P 6.6 2.9 3.0 0.0147 11 24 17.2 66.0 1.15 3485 35.0 44.0 50.0 0.60 0.68 0.74 2.10
48 0.370 P 6.6 2.9 3.0 0.0147 11 24 17.2 66.0 1.15 3485 35.0 44.0 50.0 0.60 0.68 0.74 2.10
W56 0.750 M 5.2 3.1 2.8 0.0318 15 33 16.5 52.0 1.15 1735 43.0 52.0 57.0 0.43 0.52 0.60 2.29
W56 0.750 N 5.3 3.1 2.8 0.0318 15 33 16.5 52.0 1.15 1735 43.0 52.0 57.0 0.43 0.52 0.60 2.30
0.25 0.18
W56 0.750 N 5.3 3.1 2.8 0.0318 15 33 16.5 52.0 1.15 1735 43.0 52.0 57.0 0.43 0.52 0.60 2.30
48 0.750 N 5.3 3.1 2.8 0.0318 15 33 16.5 52.0 1.15 1735 43.0 52.0 57.0 0.43 0.52 0.60 2.30
W56 1.11 L 5.8 1.8 2.3 0.0479 18 40 20.7 52.0 1.15 1165 45.0 54.0 60.0 0.63 0.70 0.75 1.75
48 1.11 L 5.8 1.8 2.3 0.0479 18 40 20.7 52.0 1.15 1165 45.0 54.0 60.0 0.63 0.70 0.75 1.75
W56 0.490 P 7.0 2.9 2.9 0.0190 8 18 18.7 66.0 1.15 3490 42.0 50.0 54.0 0.61 0.69 0.76 2.60
48 0.490 P 7.0 2.9 2.9 0.0190 8 18 18.7 66.0 1.15 3490 42.0 50.0 54.0 0.61 0.69 0.76 2.60
W56 0.990 N 5.6 3.2 2.8 0.0399 12 26 18.3 52.0 1.15 1735 46.0 55.0 61.0 0.42 0.51 0.59 3.00
0.33 0.25
W56 0.990 N 5.6 3.2 2.8 0.0399 12 26 18.3 52.0 1.15 1735 46.0 55.0 61.0 0.42 0.51 0.59 3.00
48 0.990 N 5.6 3.2 2.8 0.0399 12 26 18.3 52.0 1.15 1735 46.0 55.0 61.0 0.42 0.51 0.59 3.00
56 1.46 M 6.5 2.4 2.7 0.0975 22 48 27.6 54.0 1.15 1170 48.0 58.0 63.0 0.61 0.69 0.74 2.30
W56 0.740 P 8.0 2.9 3.0 0.0233 7 15 20.5 66.0 1.15 3500 50.0 58.0 60.0 0.59 0.69 0.76 3.50
48 0.740 P 8.0 2.9 3.0 0.0233 7 15 20.5 66.0 1.15 3500 50.0 58.0 60.0 0.59 0.69 0.76 3.50
W56 1.50 L 5.5 2.9 2.5 0.0479 10 22 20.7 52.0 1.15 1730 52.0 59.0 64.0 0.46 0.56 0.66 3.81
W56 1.50 M 5.7 3.2 2.7 0.0479 10 22 20.7 52.0 1.15 1730 52.0 59.0 64.0 0.44 0.54 0.63 4.00
0.5 0.37
Electrical Data
W56 1.50 M 5.7 3.2 2.7 0.0479 10 22 20.7 52.0 1.15 1730 52.0 59.0 64.0 0.44 0.54 0.63 4.00
48 1.50 M 5.7 3.2 2.7 0.0479 10 22 20.7 52.0 1.15 1730 52.0 59.0 64.0 0.44 0.54 0.63 4.00
48 1.50 M 5.7 3.2 2.7 0.0479 10 22 20.7 52.0 1.15 1730 52.0 59.0 64.0 0.44 0.54 0.63 4.00
56 2.21 L 6.6 2.4 2.6 0.1241 18 40 30.9 54.0 1.15 1170 54.0 63.0 67.0 0.58 0.67 0.72 3.20
continued on next page
230 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
56 1.11 L 8.0 2.8 2.9 0.0394 10 22 26.5 68.0 1.15 3500 52.0 62.0 66.0 0.81 0.87 0.91 4.00
56 2.23 L 6.2 2.8 2.5 0.0778 10 22 28.7 54.0 1.15 1745 57.0 65.0 68.5 0.50 0.60 0.70 4.98
56 2.23 M 6.4 3.0 2.7 0.0778 10 22 28.7 54.0 1.15 1745 57.0 65.0 68.5 0.47 0.58 0.67 5.30
0.75 0.55 56 2.23 M 6.4 3.0 2.7 0.0778 10 22 28.7 54.0 1.15 1745 57.0 65.0 68.5 0.47 0.58 0.67 5.30
56H 3.32 L 6.4 2.2 2.4 0.1597 15 33 35.3 54.0 1.15 1170 59.0 67.0 70.0 0.58 0.67 0.73 4.70
143/5T 3.32 L 6.4 2.2 2.4 0.1597 15 33 35.3 --- 1.15 1170 59.0 67.0 70.0 0.58 0.67 0.73 4.70
56 3.32 L 6.4 2.2 2.4 0.1597 15 33 35.3 54.0 1.15 1170 59.0 67.0 70.0 0.58 0.67 0.73 4.70
56 1.48 L 8.4 2.8 2.8 0.0472 8 18 28.7 68.0 1.15 3500 55.0 64.0 70.0 0.82 0.88 0.92 5.10
56 2.97 M 6.7 2.6 2.5 0.1037 8 18 33.1 54.0 1.15 1745 62.0 68.0 71.0 0.51 0.62 0.70 6.56
56 2.97 M 6.7 2.8 2.7 0.1037 8 18 33.1 54.0 1.15 1745 62.0 68.0 71.0 0.48 0.60 0.68 6.80
56 2.97 M 6.7 2.8 2.7 0.1037 8 18 33.1 54.0 1.15 1745 62.0 68.0 71.0 0.48 0.60 0.68 6.80
1 0.75 143/5T 2.97 M 6.7 2.8 2.7 0.1037 8 18 33.1 54.0 1.15 1745 62.0 68.0 71.0 0.48 0.60 0.68 6.80
143/5T 2.97 M 6.7 2.8 2.7 0.1037 8 18 33.1 54.0 1.15 1745 62.0 68.0 71.0 0.48 0.60 0.68 6.80
56H 4.45 J 6.1 1.8 2.0 0.1951 13 29 43.0 54.0 1.15 1165 64.0 71.0 73.0 0.68 0.77 0.81 5.50
143/5T 4.45 J 6.1 1.8 2.0 0.1951 13 29 43.0 --- 1.15 1165 64.0 71.0 73.0 0.68 0.77 0.81 5.50
56 4.45 J 6.1 1.8 2.0 0.1951 13 29 43.0 54.0 1.15 1165 64.0 71.0 73.0 0.68 0.77 0.81 5.50
56 2.22 K 8.0 2.4 2.5 0.0589 7 15 32.0 68.0 1.15 3500 66.0 73.0 75.0 0.92 0.95 0.97 6.60
143/5T 2.22 K 8.0 2.4 2.5 0.0589 7 15 32.0 68.0 1.15 3500 66.0 73.0 75.0 0.92 0.95 0.97 6.60
56H 4.45 L 8.0 2.3 2.5 0.1426 8 18 43.0 54.0 1.15 1745 69.0 75.0 77.0 0.70 0.80 0.84 7.39
56H 4.45 L 8.0 2.3 2.5 0.1426 8 18 43.0 54.0 1.15 1745 69.0 75.0 77.0 0.70 0.80 0.84 7.39
1.5 1.1 56H 4.45 L 8.0 2.5 2.7 0.1426 8 18 43.0 54.0 1.15 1745 69.0 75.0 77.0 0.68 0.78 0.83 7.48
56H 4.45 L 8.0 2.5 2.7 0.1426 8 18 43.0 54.0 1.15 1745 69.0 75.0 77.0 0.68 0.78 0.83 7.48
143/5T 4.45 L 8.0 2.5 2.7 0.1426 8 18 43.0 54.0 1.15 1745 69.0 75.0 77.0 0.68 0.78 0.83 7.48
56 4.45 L 8.0 2.5 2.7 0.1426 8 18 43.0 54.0 1.15 1745 69.0 75.0 77.0 0.68 0.78 0.83 7.48
56 4.45 L 8.0 2.5 2.7 0.1426 8 18 43.0 54.0 1.15 1745 69.0 75.0 77.0 0.68 0.78 0.83 7.48
56H 2.96 J 7.8 2.2 2.5 0.0707 6 13 35.3 68.0 1.15 3495 70.0 75.0 77.0 0.94 0.97 0.97 8.73
143/5T 2.96 K 7.8 2.2 2.5 0.0707 6 13 35.3 68.0 1.15 3495 70.0 75.0 77.0 0.89 0.93 0.95 8.92
143/5T 2.96 J 7.8 2.2 2.5 0.0707 6 13 35.3 68.0 1.15 3495 70.0 75.0 77.0 0.94 0.97 0.97 8.73
56 2.96 J 7.8 2.2 2.5 0.0707 6 13 35.3 68.0 1.15 3495 70.0 75.0 77.0 0.94 0.97 0.97 8.73
56H 5.94 L 8.0 2.3 2.4 0.1614 6 13 46.3 54.0 1.15 1745 70.0 76.0 78.5 0.67 0.77 0.83 10.0
2 1.5
56H 5.94 L 8.0 2.6 2.6 0.1614 6 13 46.3 54.0 1.15 1745 70.0 76.0 78.5 0.66 0.76 0.82 10.0
56H 5.94 L 8.0 2.6 2.6 0.1614 6 13 46.3 54.0 1.15 1745 70.0 76.0 78.5 0.66 0.76 0.82 10.0
Electrical Data
143/5T 5.94 L 8.0 2.6 2.6 0.1614 6 13 46.3 54.0 1.15 1745 70.0 76.0 78.5 0.66 0.76 0.82 10.0
143/5T 5.94 L 8.0 2.6 2.6 0.1614 6 13 46.3 54.0 1.15 1745 70.0 76.0 78.5 0.66 0.76 0.82 10.0
56 5.94 L 8.0 2.6 2.6 0.1614 6 13 46.3 54.0 1.15 1745 70.0 76.0 78.5 0.66 0.76 0.82 10.0
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-7
Electrical Data
Single Phase - General Purpose - TEFC - Rolled Steel - Standard Efficiency - continued
230V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
56H 4.45 J 8.0 2.1 2.5 0.0945 6 13 45.2 68.0 1.15 3490 76.0 79.0 80.0 0.86 0.92 0.94 12.7
143/5T 4.45 J 8.0 2.1 2.5 0.0945 6 13 45.2 68.0 1.15 3490 76.0 79.0 80.0 0.86 0.92 0.94 12.7
3 2.2
56 4.45 J 8.0 2.1 2.5 0.0945 6 13 45.2 68.0 1.15 3490 76.0 79.0 80.0 0.86 0.92 0.94 12.7
182/4T 8.86 J 8.4 3.1 2.4 0.3709 12 26 83.8 59.0 1.15 1755 72.0 78.5 81.5 0.99 0.99 0.99 11.9
213/5T 11.1 G 7.1 2.2 2.7 0.4862 6 13 130 75.0 1.15 3515 78.5 82.5 84.0 0.98 0.99 0.99 28.8
7.5 5.5 182/4T 11.1 G 7.2 2.6 3.0 0.2252 8 18 99.2 72.0 1.15 3500 80.0 84.0 85.5 0.99 0.99 0.99 28.3
213/5T 22.3 G 6.8 2.6 2.3 1.43 6 13 163 64.0 1.15 1745 78.5 82.5 84.0 0.99 0.99 0.99 28.8
213/5T 14.8 H 7.2 2.5 2.9 0.4862 6 13 137 75.0 1.15 3510 81.5 85.5 86.5 0.99 0.99 0.99 38.1
10 7.5
213/5T 29.7 G 6.5 2.2 2.6 1.43 6 13 172 64.0 1.15 1745 81.5 85.5 86.5 0.99 0.99 0.99 38.1
213/5T 18.5 H 7.4 2.5 3.1 0.5918 6 13 159 75.0 1.15 3510 84.0 86.5 87.5 0.98 0.98 0.98 46.6
12.5 9.2
213/5T* 37.0 H 7.5 2.5 3.1 1.96 6 13 212 64.0 1.15 1750 82.5 86.5 87.5 0.98 0.98 0.98 46.6
Electrical Data
230V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
W56 0.180 R 6.4 3.0 3.0 0.0126 18 40 14.3 56.0 1.40 3500 32.0 40.0 44.0 0.60 0.67 0.72 1.24
48 0.180 R 6.4 3.0 3.0 0.0126 18 40 14.3 56.0 1.40 3500 32.0 40.0 44.0 0.60 0.67 0.72 1.24
0.12 0.09
W56 0.360 P 4.8 3.3 3.1 0.0240 26 57 13.7 50.0 1.40 1740 37.0 45.0 50.0 0.41 0.48 0.55 1.42
48 0.360 P 4.8 3.3 3.1 0.0240 26 57 13.7 50.0 1.40 1740 37.0 45.0 50.0 0.41 0.48 0.55 1.42
W56 0.240 P 6.5 3.0 3.0 0.0126 14 31 14.3 56.0 1.35 3500 35.0 44.0 53.0 0.56 0.64 0.70 1.41
48 0.240 P 6.5 3.0 3.0 0.0126 14 31 14.3 56.0 1.35 3500 35.0 44.0 53.0 0.56 0.64 0.70 1.41
0.16 0.12
W56 0.480 P 5.5 3.2 3.0 0.0280 16 35 14.8 50.0 1.35 1740 41.0 49.0 53.0 0.42 0.50 0.57 1.73
48 0.480 P 5.5 3.2 3.0 0.0280 16 35 14.8 50.0 1.35 1740 41.0 49.0 53.0 0.42 0.50 0.57 1.73
W56 0.370 P 7.2 3.0 3.0 0.0147 10 22 15.4 56.0 1.35 3500 43.0 50.0 55.0 0.55 0.64 0.71 2.00
48 0.370 P 7.2 3.0 3.0 0.0147 10 22 15.4 56.0 1.35 3500 43.0 50.0 55.0 0.55 0.64 0.71 2.00
0.25 0.18
W56 0.750 N 5.3 3.1 2.8 0.0318 14 31 15.4 50.0 1.35 1735 46.0 54.0 57.0 0.41 0.51 0.59 2.33
48 0.750 N 5.3 3.1 2.8 0.0318 14 31 15.4 50.0 1.35 1735 46.0 54.0 57.0 0.41 0.51 0.59 2.33
W56 0.490 P 7.4 3.0 3.0 0.0190 8 18 16.1 56.0 1.35 3500 49.0 56.0 59.0 0.57 0.66 0.74 2.50
48 0.490 P 7.4 3.0 3.0 0.0190 8 18 16.1 56.0 1.35 3500 49.0 56.0 59.0 0.57 0.66 0.74 2.50
0.33 0.25
W56 0.990 N 5.6 3.3 2.8 0.0399 12 26 16.8 50.0 1.35 1735 49.0 57.0 60.0 0.41 0.50 0.58 3.12
48 0.990 N 5.6 3.3 2.8 0.0399 12 26 16.8 50.0 1.35 1735 49.0 57.0 60.0 0.41 0.50 0.58 3.12
W56 0.740 P 8.2 2.8 3.0 0.0233 6 13 18.7 56.0 1.25 3500 54.0 61.0 65.0 0.55 0.66 0.74 3.34
48 0.740 P 8.2 2.8 3.0 0.0233 6 13 18.7 56.0 1.25 3500 54.0 61.0 65.0 0.55 0.66 0.74 3.34
0.5 0.37
W56 1.49 M 5.8 3.2 2.7 0.0479 10 22 18.7 50.0 1.25 1735 54.0 61.0 63.0 0.43 0.53 0.62 4.12
48 1.49 M 5.8 3.2 2.7 0.0479 10 22 18.7 50.0 1.25 1735 54.0 61.0 63.0 0.43 0.53 0.62 4.12
W56 1.11 N 8.0 2.6 3.0 0.0273 6 13 20.9 56.0 1.25 3500 56.0 63.0 67.0 0.54 0.66 0.74 4.82
48 1.11 N 8.0 2.6 3.0 0.0273 6 13 20.9 56.0 1.25 3500 56.0 63.0 67.0 0.54 0.66 0.74 4.82
0.75 0.55
56 2.23 M 6.5 2.8 2.7 0.0778 10 22 26.5 52.0 1.25 1745 60.0 66.0 69.0 0.46 0.57 0.66 5.25
56 2.23 M 6.5 2.8 2.7 0.0778 10 22 26.5 52.0 1.25 1745 60.0 66.0 69.0 0.46 0.57 0.66 5.25
56 1.48 M 6.9 2.6 2.8 0.0472 8 18 26.5 58.0 1.25 3500 60.0 65.0 68.0 0.55 0.67 0.75 6.39
1 0.75 56 2.97 M 6.7 2.7 2.7 0.0973 7 15 30.9 52.0 1.15 1745 60.0 68.0 71.0 0.48 0.60 0.68 6.75
143/5T 2.97 M 6.7 2.7 2.7 0.0973 7 15 30.9 52.0 1.15 1745 60.0 68.0 71.0 0.48 0.60 0.68 6.75
56 2.22 L 7.3 2.5 2.7 0.0589 6 13 30.9 58.0 1.15 3500 65.0 70.0 72.0 0.57 0.69 0.77 8.60
143/5T 2.22 L 7.3 2.5 2.7 0.0589 6 13 30.9 58.0 1.15 3500 65.0 70.0 72.0 0.57 0.69 0.77 8.60
1.5 1.1 56 4.45 M 6.9 2.7 2.7 0.1362 7 15 40.1 52.0 1.15 1745 66.0 72.0 73.0 0.48 0.60 0.69 9.49
56H 4.45 M 6.9 2.7 2.7 0.1362 7 15 40.1 52.0 1.15 1745 66.0 72.0 73.0 0.48 0.60 0.69 9.49
143/5T 4.45 M 6.9 2.7 2.7 0.1362 7 15 40.1 52.0 1.15 1745 66.0 72.0 73.0 0.48 0.60 0.69 9.49
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-9
Electrical Data
Single Phase - General Purpose - ODP - Rolled Steel - Standard Efficiency - continued
230 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
56H 2.97 L 7.8 2.5 2.6 0.0748 6 13 36.4 58.0 1.15 3490 69.0 72.0 75.0 0.60 0.72 0.80 10.9
143/5T 2.97 L 7.8 2.5 2.6 0.0748 6 13 36.4 58.0 1.15 3490 69.0 72.0 75.0 0.60 0.72 0.80 10.9
56 2.97 L 7.8 2.5 2.6 0.0748 6 13 36.4 58.0 1.15 3490 69.0 72.0 75.0 0.60 0.72 0.80 10.9
2 1.5
56H 5.96 L 7.5 2.4 2.6 0.1550 6 13 42.3 52.0 1.15 1740 70.0 75.0 78.0 0.62 0.73 0.80 10.5
143/5T 5.96 L 7.5 2.4 2.6 0.1550 6 13 42.3 52.0 1.15 1740 70.0 75.0 78.0 0.62 0.73 0.80 10.5
56 5.96 L 7.5 2.4 2.6 0.1550 6 13 42.3 52.0 1.15 1740 70.0 75.0 78.0 0.62 0.73 0.80 10.5
56H 4.46 K 8.0 2.0 2.5 0.0864 6 13 41.2 58.0 1.15 3485 71.0 76.0 78.0 0.85 0.91 0.93 13.2
143/5T 4.46 K 8.0 2.0 2.5 0.0864 6 13 41.2 58.0 1.15 3485 71.0 76.0 78.0 0.85 0.91 0.93 13.2
3 2.2
56 4.46 K 8.0 2.0 2.5 0.0864 6 13 41.2 58.0 1.15 3485 71.0 76.0 78.0 0.85 0.91 0.93 13.2
182/4T 8.86 H 7.1 2.8 2.5 0.2781 6 13 67.3 --- 1.15 1755 69.8 77.1 80.0 0.83 0.90 0.93 12.7
182/4T 7.41 G 6.9 2.9 2.5 0.1559 6 13 71.7 --- 1.15 3495 78.7 83.2 84.0 0.98 0.99 0.99 19.3
5 3.7 182/4T 14.8 H 7.0 2.5 2.4 0.4172 6 13 88.2 --- 1.15 1755 75.2 81.3 84.0 0.95 0.97 0.97 19.7
213/5T 14.8 H 7.5 2.6 2.3 1.16 7 15 203 --- 1.15 1755 78.6 83.9 85.5 0.98 0.99 0.99 18.9
213/5T 11.0 H 7.8 2.7 2.8 0.4651 6 13 110 --- 1.15 3520 81.2 85.0 85.5 0.99 0.99 0.99 28.3
7.5 5.5 182/4T 11.1 G 6.9 2.8 2.6 0.1991 6 13 83.8 --- 1.15 3500 80.6 84.4 85.5 0.97 0.98 0.98 28.5
213/5T 22.2 G 6.9 2.3 2.4 1.29 6 13 212 --- 1.15 1750 83.1 85.0 85.5 0.95 0.96 0.97 28.6
213/5T 14.8 G 6.8 2.3 2.7 0.4440 6 13 112 --- 1.15 3500 82.4 85.9 86.5 0.99 0.99 0.99 38.1
10 7.5
213/5T 29.7 G 6.6 2.2 2.4 1.34 6 13 216 --- 1.15 1745 83.2 86.3 86.5 0.97 0.98 0.98 38.5
213/5T 18.4 H 7.9 2.4 3.3 0.6341 6 13 161 --- 1.15 3520 84.7 87.8 88.5 0.99 0.99 0.99 45.7
12.5 9.2
213/5T 37.1 G 7.0 2.3 2.9 1.65 6 13 246 --- 1.15 1745 84.2 87.3 87.5 0.97 0.98 0.98 46.4
15 11 213/5T 22.0 J 8.7 2.5 4.1 0.7188 6 13 183 --- 1.15 3530 85.0 88.0 88.5 0.89 0.93 0.95 56.9
Electrical Data
230 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
W56 0.370 M 8.8 2.8 3.1 0.0211 18 40 17.2 56.0 1.35 3510 50.0 59.0 66.6 0.91 0.93 0.94 1.25
48 0.370 M 8.8 2.8 3.1 0.0211 18 40 17.2 56.0 1.35 3510 50.0 59.0 66.6 0.91 0.93 0.94 1.25
0.25 0.18
W56 0.740 M 7.5 2.9 3.0 0.0358 20 44 16.5 50.0 1.35 1745 53.0 62.0 68.5 0.56 0.65 0.71 1.60
48 0.740 M 7.5 2.9 3.0 0.0358 20 44 16.5 50.0 1.35 1745 53.0 62.0 68.5 0.56 0.65 0.71 1.60
W56 0.490 L 8.8 2.8 3.0 0.0254 15 33 19.4 56.0 1.35 3510 56.0 64.0 70.5 0.97 0.97 0.97 1.60
48 0.490 L 8.8 2.8 3.0 0.0254 15 33 19.4 56.0 1.35 3510 56.0 64.0 70.5 0.97 0.97 0.97 1.60
0.33 0.25
W56 0.980 N 8.0 3.2 3.2 0.0439 17 37 17.6 50.0 1.35 1745 57.0 66.0 72.4 0.57 0.67 0.73 2.10
48 0.980 N 8.0 3.2 3.2 0.0439 17 37 17.6 50.0 1.35 1745 57.0 66.0 72.4 0.57 0.67 0.73 2.10
W56 0.740 L 8.8 2.7 3.0 0.0254 9 20 19.4 56.0 1.25 3510 60.0 68.0 72.4 0.90 0.93 0.94 2.40
48 0.740 L 8.8 2.7 3.0 0.0254 9 20 19.4 56.0 1.25 3510 60.0 68.0 72.4 0.90 0.93 0.94 2.40
0.5 0.37
W56 1.48 L 7.7 3.1 3.0 0.0520 15 33 19.8 50.0 1.25 1745 63.0 71.0 76.2 0.60 0.70 0.77 2.75
48 1.48 L 7.7 3.1 3.0 0.0520 15 33 19.8 50.0 1.25 1745 63.0 71.0 76.2 0.60 0.70 0.77 2.75
56 1.11 K 8.6 3.0 3.0 0.0434 18 40 25.4 58.0 1.25 3510 64.0 71.0 76.2 0.88 0.92 0.93 3.40
0.75 0.55
56 2.22 K 8.0 2.6 2.5 0.0973 20 44 30.9 52.0 1.25 1750 74.0 79.0 81.8 0.74 0.82 0.86 3.40
56 1.48 K 8.4 2.9 3.0 0.0551 16 35 29.8 58.0 1.25 3510 69.0 76.0 80.4 0.89 0.93 0.94 4.30
56 2.96 K 8.4 2.6 2.5 0.1232 15 33 36.4 52.0 1.15 1750 75.0 80.0 82.6 0.75 0.83 0.87 4.50
1 0.75
143/5T 2.96 K 8.4 2.6 2.5 0.1232 15 33 36.4 52.0 1.15 1750 75.0 80.0 82.6 0.75 0.83 0.87 4.50
56H 2.96 K 8.4 2.6 2.5 0.1232 15 33 36.4 52.0 1.15 1750 75.0 80.0 82.6 0.75 0.83 0.87 4.50
56 2.22 J 7.7 2.6 2.7 0.0629 10 22 32.0 58.0 1.15 3500 73.0 79.0 81.5 0.88 0.89 0.89 6.65
143/5T 2.22 J 7.7 2.6 2.7 0.0629 10 22 32.0 58.0 1.15 3500 73.0 79.0 81.5 0.88 0.89 0.89 6.65
1.5 1.1 56H 4.45 K 8.0 2.6 2.5 0.1362 22 48 40.1 52.0 1.15 1745 76.0 81.0 83.8 0.72 0.81 0.84 6.80
143/5T 4.45 K 8.0 2.6 2.5 0.1362 22 48 40.1 52.0 1.15 1745 76.0 81.0 83.8 0.72 0.81 0.84 6.80
56 4.45 K 8.0 2.6 2.5 0.1362 22 48 40.1 52.0 1.15 1745 76.0 81.0 83.8 0.72 0.81 0.84 6.80
56 2.96 K 8.6 2.5 2.8 0.0748 8 18 36.4 58.0 1.15 3500 76.0 81.0 82.9 0.90 0.94 0.94 8.40
56H 2.96 K 8.6 2.5 2.8 0.0748 8 18 36.4 58.0 1.15 3500 76.0 81.0 82.9 0.90 0.94 0.94 8.40
143/5T 2.96 K 8.6 2.5 2.8 0.0748 8 18 36.4 58.0 1.15 3500 76.0 81.0 82.9 0.90 0.94 0.94 8.40
2 1.5
56H 5.96 K 7.6 2.6 2.5 0.1614 18 40 45.2 52.0 1.15 1740 77.0 82.0 84.5 0.68 0.78 0.83 9.30
143/5T 5.96 K 7.6 2.6 2.5 0.1614 18 40 45.2 52.0 1.15 1740 77.0 82.0 84.5 0.68 0.78 0.83 9.30
56 5.96 K 7.6 2.6 2.5 0.1614 18 40 45.2 52.0 1.15 1740 77.0 82.0 84.5 0.68 0.78 0.83 9.30
56H 4.44 J 8.2 2.2 2.8 0.0945 6 13 42.3 58.0 1.15 3500 76.0 81.0 84.1 0.87 0.92 0.93 12.2
3 2.2 143/5T 4.44 J 8.2 2.2 2.8 0.0945 6 13 42.3 58.0 1.15 3500 76.0 81.0 84.1 0.87 0.92 0.93 12.2
Electrical Data
56 4.44 J 8.2 2.2 2.8 0.0945 6 13 42.3 58.0 1.15 3500 76.0 81.0 84.1 0.87 0.92 0.93 12.2
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-11
Electrical Data
W22 - General Purpose - Three Phase - TEFC
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
143/5T 1.49 L 8.2 2.8 3.4 0.0332 22 48 36.4 68.0 1.25 3480 75.0 79.0 81.5 0.63 0.74 0.80 1.44
143/5T 2.94 L 8.4 3.2 3.5 0.1172 18 40 40.8 51.0 1.25 1760 80.0 84.0 85.5 0.55 0.68 0.75 1.47
1 0.75
143/5T 4.51 K 6.2 2.6 3.0 0.1595 28 62 52.9 49.0 1.25 1150 77.0 82.0 82.5 0.45 0.57 0.66 1.73
182/4T 5.92 M 6.0 3.0 3.5 0.3991 22 48 94.8 50.0 1.25 875 74.0 77.0 78.5 0.32 0.42 0.52 2.30
143/5T 2.23 L 8.9 3.5 3.8 0.0470 21 46 40.8 68.0 1.25 3490 81.5 84.0 84.0 0.70 0.80 0.84 1.96
143/5T 4.43 L 8.4 2.5 3.4 0.1431 14 31 48.5 51.0 1.25 1755 82.5 85.5 86.5 0.60 0.70 0.79 2.02
1.5 1.1
182/4T 6.64 M 7.8 3.2 4.0 0.4879 16 35 70.3 52.0 1.25 1170 84.0 86.5 87.5 0.45 0.54 0.62 2.54
182/4T 9.04 J 5.5 2.5 2.6 0.5766 17 37 111 50.0 1.25 860 80.0 82.5 82.5 0.43 0.54 0.62 2.70
143/5T 2.98 L 8.9 3.5 3.8 0.0605 17 37 51.8 68.0 1.25 3475 82.5 85.5 85.5 0.71 0.80 0.86 2.56
143/5T 5.92 K 8.0 2.7 3.2 0.1561 11 24 50.7 51.0 1.25 1750 85.5 86.5 86.5 0.57 0.70 0.79 2.76
2 1.5
182/4T 8.86 L 7.5 3.0 3.5 0.6210 31 68 87.5 52.0 1.25 1170 86.5 87.5 88.5 0.46 0.58 0.66 3.22
213/5T 11.8 M 7.6 2.4 2.9 1.79 39 86 149 52.0 1.25 875 82.5 84.0 85.5 0.45 0.55 0.65 3.39
182/4T 4.42 K 8.6 2.5 3.8 0.1889 41 90 88.2 69.0 1.25 3515 82.5 86.5 86.5 0.75 0.84 0.88 3.63
182/4T 8.83 K 8.1 2.3 3.4 0.3401 23 51 90.4 56.0 1.25 1760 87.5 88.5 89.5 0.61 0.73 0.79 3.91
3 2.2
213/5T 13.2 K 7.0 2.0 2.8 1.20 58 128 121 55.0 1.25 1175 86.5 88.5 89.5 0.50 0.63 0.70 4.41
213/5T 17.9 K 6.8 2.3 2.8 2.11 44 97 176 52.0 1.25 870 84.0 85.5 85.5 0.50 0.63 0.71 4.55
182/4T 7.40 J 7.6 2.3 3.5 0.2233 25 55 88.2 69.0 1.25 3500 86.5 88.5 88.5 0.76 0.85 0.89 5.90
182/4T 14.8 J 7.5 2.3 3.2 0.4003 15 33 94.8 56.0 1.25 1755 88.5 89.5 89.5 0.62 0.74 0.80 6.45
5 3.7
213/5T 22.1 J 6.8 1.7 2.6 1.47 57 125 162 55.0 1.25 1170 88.5 89.5 89.5 0.58 0.70 0.76 6.83
254/6T 29.4 H 5.3 1.9 2.5 3.41 44 97 258 54.0 1.25 880 85.5 87.5 87.5 0.49 0.62 0.70 7.58
213/5T 11.0 H 7.2 2.1 3.0 0.4665 27 59 139 72.0 1.25 3520 87.5 89.5 89.5 0.75 0.84 0.88 8.76
213/5T 22.0 H 7.1 2.2 3.1 1.34 20 44 154 58.0 1.25 1765 89.5 91.0 91.7 0.66 0.76 0.82 9.18
7.5 5.5
254/6T 33.1 H 6.8 2.5 3.0 3.92 30 66 262 59.0 1.25 1175 89.5 90.2 91.0 0.63 0.74 0.80 9.48
254/6T 44.2 G 5.3 2.0 2.5 4.43 33 73 284 54.0 1.25 880 85.5 87.5 87.5 0.50 0.63 0.71 11.1
213/5T 14.7 H 7.2 2.2 2.9 0.6362 24 53 163 72.0 1.25 3520 89.5 90.2 90.2 0.79 0.87 0.90 11.6
213/5T 29.4 H 6.4 2.0 3.0 1.51 17 37 172 58.0 1.25 1765 91.0 91.7 91.7 0.66 0.77 0.83 12.4
10 7.5
254/6T 44.1 H 6.5 2.3 2.8 4.43 26 57 289 59.0 1.25 1175 90.2 91.0 91.0 0.63 0.74 0.78 13.3
284/6T 58.9 G 5.6 2.0 2.4 7.20 32 70 373 54.0 1.25 880 89.5 90.2 90.2 0.61 0.72 0.78 13.4
254/6T 22.0 G 6.7 2.2 2.7 1.26 25 55 236 72.0 1.25 3530 89.5 91.0 91.0 0.77 0.85 0.88 17.2
254/6T 44.0 G 6.4 2.3 2.7 2.62 17 37 251 64.0 1.25 1765 91.0 91.7 92.4 0.68 0.78 0.83 18.0
15 11
284/6T 66.1 G 6.4 2.3 2.7 7.85 20 44 379 59.0 1.25 1175 91.0 91.7 91.7 0.69 0.80 0.84 17.9
284/6T 88.3 G 5.5 2.0 2.3 8.18 25 55 417 54.0 1.25 880 85.5 90.0 90.2 0.62 0.72 0.78 19.6
254/6T 29.4 G 6.1 2.0 2.4 1.54 21 46 269 72.0 1.25 3520 91.0 91.7 91.0 0.82 0.87 0.89 23.2
Electrical Data
254/6T 58.7 H 6.9 2.3 2.7 3.10 15 33 291 64.0 1.25 1765 91.7 92.4 93.0 0.68 0.79 0.84 24.1
20 15 284/6T 88.2 G 6.2 2.3 2.6 9.16 16 35 426 59.0 1.25 1175 91.0 91.7 91.7 0.70 0.80 0.85 24.2
324T 118 G 5.0 1.9 2.2 9.37 27 59 452 56.0 1.25 880 89.5 91.0 91.0 0.54 0.66 0.73 28.3
324/6T 118 G 5.0 1.9 2.2 9.37 27 59 452 56.0 1.25 880 89.5 91.0 91.0 0.54 0.66 0.73 28.3
284/6TS 36.6 G 6.3 2.0 2.5 2.69 17 37 362 72.0 1.25 3535 91.0 91.7 91.7 0.82 0.87 0.89 28.5
284/6T 73.4 G 6.2 2.4 2.7 5.11 24 53 388 64.0 1.25 1765 92.4 93.0 93.6 0.70 0.80 0.84 29.5
25 18.5
324/6T 110 G 6.2 2.1 2.6 11.5 26 57 560 62.0 1.25 1180 91.7 93.0 93.0 0.65 0.77 0.82 30.4
324/6T 147 G 5.2 2.0 2.3 11.9 23 51 509 56.0 1.25 880 89.5 91.0 91.0 0.51 0.64 0.71 35.9
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
284/6TS 44.0 G 6.3 2.0 2.5 3.37 15 33 392 72.0 1.25 3535 91.7 91.7 91.7 0.82 0.87 0.89 33.8
284/6T 88.1 G 6.1 2.4 2.4 5.85 20 44 437 64.0 1.25 1765 93.0 93.0 93.6 0.70 0.80 0.84 35.1
30 22
324/6T 132 G 6.2 2.3 2.6 13.2 21 46 628 62.0 1.25 1180 91.7 93.0 93.0 0.65 0.76 0.82 36.2
364/5T 177 G 6.2 1.7 2.4 23.5 20 44 803 60.0 1.25 880 92.4 92.4 92.4 0.63 0.74 0.80 37.0
324/6TS 58.3 G 6.3 2.3 2.4 4.90 22 48 547 78.0 1.25 3555 91.7 92.4 92.4 0.82 0.87 0.89 45.8
324/6T 117 G 6.1 2.2 2.4 9.16 20 44 492 66.0 1.25 1775 93.6 94.1 94.1 0.72 0.80 0.85 47.1
40 30
364/5T 175 G 6.4 2.0 2.4 29.0 21 46 833 66.0 1.25 1185 93.6 93.6 94.1 0.73 0.82 0.86 46.5
364/5T 235 H 6.7 1.7 2.3 29.0 18 40 875 60.0 1.25 880 92.4 93.0 92.4 0.66 0.76 0.81 50.3
324/6TS 73.0 F 6.2 2.2 2.3 5.75 23 51 584 78.0 1.25 3550 93.0 93.0 93.0 0.83 0.87 0.89 56.1
324/6T 146 G 6.2 2.3 2.7 9.16 15 33 536 66.0 1.25 1775 93.0 94.1 94.5 0.66 0.77 0.83 59.2
50 37
364/5T 220 G 6.4 2.0 2.4 32.4 18 40 869 66.0 1.25 1180 93.6 94.1 94.1 0.74 0.83 0.86 57.4
404/5T 294 H 6.8 1.7 2.6 34.6 15 33 1012 60.0 1.25 880 93.0 93.0 93.0 0.68 0.78 0.83 60.0
364/5TS 87.3 G 6.6 2.0 2.6 10.6 14 31 825 79.0 1.25 3560 91.7 93.0 93.6 0.81 0.88 0.90 67.0
364/5T 175 G 6.6 2.4 2.6 22.4 15 33 869 67.0 1.25 1775 94.1 94.5 95.0 0.75 0.83 0.87 68.3
60 45
404/5T 262 H 7.1 2.0 2.3 36.9 20 44 1036 68.0 1.25 1185 94.1 94.5 94.5 0.74 0.82 0.86 69.5
404/5T 353 H 6.5 1.8 2.7 40.2 13 29 1111 60.0 1.25 880 93.0 93.0 93.0 0.68 0.78 0.83 73.0
364/5TS 109 G 6.7 2.0 2.6 11.9 10 22 847 79.0 1.25 3555 92.4 93.6 93.6 0.83 0.88 0.90 81.9
364/5T 219 G 6.4 2.4 2.6 23.3 14 31 919 67.0 1.25 1775 94.5 95.0 95.4 0.73 0.82 0.86 84.1
75 55
404/5T 329 G 6.4 2.0 2.3 40.2 17 37 1089 68.0 1.25 1180 94.1 94.5 94.5 0.74 0.83 0.86 84.9
444/5T 437 G 6.0 1.8 2.1 73.6 18 40 1444 63.0 1.25 890 93.0 93.6 93.6 0.64 0.74 0.79 93.0
404/5TS 146 G 6.5 2.0 2.4 13.2 14 31 1045 79.0 1.25 3545 93.0 94.1 94.1 0.85 0.90 0.91 110
404/5T 292 H 7.3 2.4 2.6 29.9 13 29 1140 68.0 1.25 1775 95.0 95.0 95.4 0.77 0.84 0.88 111
100 75
444/5T 437 G 6.2 2.2 2.6 87.3 20 44 1577 69.0 1.25 1185 94.5 95.0 95.0 0.68 0.78 0.82 121
444/5T 582 G 6.0 1.9 2.2 87.3 15 33 1599 63.0 1.25 890 93.6 94.1 94.1 0.63 0.74 0.79 127
444/5TS 181 G 6.6 2.0 2.5 33.5 29 64 1599 81.0 1.15 3570 93.6 94.5 95.0 0.82 0.87 0.89 134
444/5T 364 G 6.5 2.0 2.3 57.2 27 59 1590 73.0 1.15 1780 95.0 95.4 95.4 0.74 0.82 0.85 139
125 90
444/5T 547 G 6.4 2.1 2.4 104 19 42 1751 69.0 1.15 1185 95.0 95.4 95.0 0.70 0.79 0.83 143
445/7T 728 G 6.0 1.8 2.1 104 17 37 1887 63.0 1.15 890 94.5 94.5 94.5 0.64 0.74 0.79 151
444/5TS 218 G 6.5 1.8 2.4 39.1 22 48 1709 81.0 1.15 3570 94.1 95.0 95.0 0.83 0.88 0.89 163
444/5T 437 G 6.6 2.0 2.5 66.7 27 59 1676 73.0 1.15 1780 95.4 95.8 95.8 0.74 0.82 0.85 170
150 110
445/7T 656 G 6.2 2.4 2.6 134 20 44 2042 69.0 1.15 1185 95.0 95.4 95.8 0.67 0.78 0.82 176
445/7T 873 G 6.0 1.9 2.1 125 15 33 2042 63.0 1.15 890 94.5 94.5 94.5 0.64 0.74 0.79 185
445/7TS 290 G 6.5 2.1 2.3 44.7 14 31 1914 81.0 1.15 3570 95.0 95.4 95.4 0.86 0.89 0.90 219
Electrical Data
445/7T 580 G 6.8 2.3 2.5 76.2 16 35 2095 73.0 1.15 1785 95.8 96.2 96.2 0.73 0.82 0.85 230
200 150
447/9T 871 G 6.6 2.3 2.4 145 15 33 2247 70.0 1.15 1190 95.0 95.4 95.8 0.68 0.79 0.83 237
586/7T 1158 G 6.3 1.4 2.1 350 40 88 3334 75.0 1.15 895 95.0 95.4 95.4 0.65 0.75 0.80 247
447/9TS 363 F 6.5 2.0 2.2 50.3 18 40 2159 81.0 1.15 3565 95.4 95.8 95.8 0.87 0.90 0.91 266
447/9T 728 G 6.5 2.3 2.4 89.6 15 33 2079 75.0 1.15 1780 95.8 96.2 96.2 0.75 0.83 0.86 281
250 185
447/9T 1093 G 6.1 2.4 2.4 145 12 26 2538 70.0 1.15 1185 95.0 95.4 95.8 0.68 0.79 0.83 292
586/7T 1447 G 6.2 1.4 2.1 395 40 88 3649 75.0 1.15 895 95.4 95.8 95.8 0.66 0.76 0.81 299
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-13
Electrical Data
W22 - General Purpose - Three Phase - TEFC - continued
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
447/9TS 435 G 6.8 2.1 2.4 58.1 14 31 2545 81.0 1.15 3570 95.4 95.8 95.8 0.86 0.89 0.90 320
447/9T 873 G 6.5 2.3 2.3 89.6 16 35 2381 75.0 1.15 1780 95.8 96.2 96.2 0.77 0.84 0.87 330
300 220
447/9T 1306 J 7.7 2.7 3.0 145 10 22 2613 70.0 1.15 1190 95.4 95.8 95.8 0.63 0.75 0.81 356
586/7T 1737 H 6.7 1.5 2.2 451 40 88 4035 75.0 1.15 895 95.4 95.8 95.8 0.66 0.77 0.81 356
586/7TS 507 G 6.6 1.6 2.3 136 28 62 3621 84.0 1.15 3580 95.4 96.2 96.2 0.86 0.90 0.91 373
447/9T 1019 G 6.4 2.5 2.4 118 14 31 2675 75.0 1.15 1780 95.8 96.2 96.2 0.77 0.84 0.86 394
350 260
586/7T 1524 G 6.0 2.0 2.1 328 29 64 3784 77.0 1.15 1190 95.4 95.8 95.8 0.67 0.77 0.81 421
586/7T 2026 G 6.4 1.6 2.3 484 34 75 4309 75.0 1.00 895 95.4 95.8 95.8 0.64 0.75 0.80 426
586/7TS 579 G 6.8 1.8 2.2 122 48 106 3749 84.0 1.15 3580 95.8 96.2 96.2 0.88 0.90 0.91 430
586/7T 1158 G 6.3 2.0 2.2 179 19 42 3455 78.0 1.15 1790 95.8 96.2 96.2 0.78 0.85 0.86 455
400 300
586/7T 1741 G 6.0 2.2 2.1 368 29 64 4115 77.0 1.15 1190 95.4 95.8 96.2 0.67 0.77 0.81 483
588/9T 2315 H 6.7 1.5 2.4 537 25 55 4851 75.0 1.00 895 95.0 95.6 95.7 0.62 0.73 0.79 498
586/7TS 651 F 6.6 2.0 2.3 132 34 75 3918 84.0 1.15 3580 95.8 96.2 96.2 0.88 0.90 0.91 473
586/7T 1302 G 6.4 2.2 2.1 213 16 35 3640 78.0 1.15 1790 95.8 96.2 96.2 0.78 0.83 0.85 507
450 330
586/7T 1959 G 6.1 2.1 2.1 368 25 55 4384 77.0 1.00 1190 95.8 96.2 96.2 0.67 0.77 0.81 532
588/9T 2605 G 6.6 1.6 2.3 617 27 59 5281 75.0 1.00 895 95.2 95.7 95.8 0.65 0.75 0.81 534
586/7TS 724 G 6.8 2.2 2.4 143 39 86 4086 84.0 1.15 3580 95.8 96.2 96.2 0.88 0.90 0.91 530
500 370 586/7T 1447 G 6.5 2.2 2.3 256 16 35 3912 78.0 1.00 1790 95.8 96.2 96.2 0.80 0.85 0.87 555
586/7T 2177 G 6.0 2.2 2.1 368 25 55 4403 77.0 1.00 1190 95.8 96.2 96.2 0.66 0.76 0.80 603
588/9TS 795 G 7.4 2.3 2.7 155 33 73 4410 89.0 1.00 3585 96.0 96.5 96.5 0.84 0.89 0.90 578
550 400 586/7T 1592 G 7.1 2.2 2.5 236 16 35 4335 78.0 1.00 1790 96.2 96.4 96.5 0.74 0.82 0.86 605
588/9T 2395 G 6.5 2.2 2.3 389 30 66 4734 77.0 1.00 1190 95.2 96.0 96.1 0.63 0.74 0.79 661
588/9TS 867 H 7.4 2.3 2.7 155 33 73 4410 89.0 1.00 3585 96.0 96.5 96.5 0.84 0.89 0.90 650
600 440 586/7T 1737 G 7.1 2.3 2.5 236 16 35 4335 78.0 1.00 1790 96.2 96.4 96.5 0.74 0.82 0.86 665
588/9T 2612 H 6.5 2.2 2.3 449 31 68 5173 77.0 1.00 1190 95.4 96.1 96.2 0.63 0.74 0.79 743
588/9TS 939 G 7.1 2.0 2.4 176 56 123 4635 89.0 1.00 3585 96.1 96.6 96.6 0.86 0.90 0.91 685
650 480
588/9T 1881 H 7.4 2.5 2.7 301 22 48 4395 81.0 1.00 1790 96.0 96.5 96.6 0.71 0.81 0.85 734
588/9TS 1012 G 7.2 2.3 2.5 183 34 75 4805 89.0 1.00 3585 96.2 96.6 96.6 0.86 0.90 0.91 736
700 515.2
588/9T 2026 G 6.5 2.5 2.2 335 23 51 4584 81.0 1.00 1790 96.2 96.5 96.6 0.76 0.81 0.85 788
750 550 588/9T 2171 G 7.0 2.4 2.5 347 29 64 4952 81.0 1.00 1790 96.3 96.6 96.7 0.70 0.80 0.85 840
Electrical Data
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
143/5T 1.48 K 7.8 2.0 3.0 0.0643 22 48 26.2 68.0 1.15 3510 72.0 77.0 78.5 0.65 0.76 0.83 1.44
1 0.75 143/5T 2.94 M 8.6 2.8 3.0 0.1232 19 42 37.9 52.0 1.15 1765 82.5 84.0 85.5 0.52 0.66 0.75 1.47
143/5T 4.52 J 5.8 2.3 2.8 0.1597 31 68 38.6 49.0 1.15 1145 80.0 82.5 82.5 0.50 0.63 0.72 1.58
143/5T 2.21 L 9.1 2.3 3.0 0.1023 17 37 34.2 68.0 1.15 3520 80.0 82.5 84.0 0.71 0.82 0.88 1.87
1.5 1.1 143/5T 4.44 K 8.2 2.7 3.0 0.1101 21 46 37.9 52.0 1.15 1750 85.5 86.5 86.5 0.59 0.72 0.79 2.02
182/4T 6.64 K 6.9 2.4 3.4 0.2800 55 121 65.9 52.0 1.15 1170 84.0 86.5 87.5 0.50 0.63 0.71 2.22
143/5T 2.94 L 9.9 2.5 3.0 0.1279 13 29 40.1 68.0 1.15 3520 82.5 85.5 85.5 0.73 0.83 0.89 2.47
2 1.5 143/5T 5.94 K 8.2 2.7 3.0 0.1296 15 33 42.3 52.0 1.15 1745 85.5 87.5 86.5 0.60 0.73 0.80 2.72
182/4T 8.86 K 7.5 2.6 3.7 0.3424 44 97 76.1 52.0 1.15 1170 84.0 86.5 88.5 0.50 0.62 0.71 3.00
182/4T 4.42 K 8.8 2.2 3.0 0.1564 22 48 63.5 68.0 1.15 3515 84.0 86.5 86.5 0.71 0.82 0.87 3.67
3 2.2 182/4T 8.81 K 8.8 2.2 3.0 0.4017 18 40 80.3 56.0 1.15 1765 87.5 88.5 89.5 0.61 0.74 0.81 3.81
213/5T 13.2 H 6.4 2.3 2.9 1.08 46 101 130 55.0 1.15 1175 85.5 88.5 89.5 0.55 0.67 0.74 4.17
182/4T 7.40 J 7.8 2.2 3.0 0.2079 17 37 78.5 68.0 1.15 3500 87.5 88.5 88.5 0.76 0.85 0.89 5.90
5 3.7 182/4T 14.8 J 7.0 2.2 3.0 0.3080 16 35 71.4 56.0 1.15 1750 88.5 89.5 89.5 0.60 0.73 0.80 6.49
213/5T 22.0 H 6.0 2.2 2.5 1.26 30 66 144 55.0 1.15 1175 87.5 88.5 89.5 0.59 0.71 0.77 6.74
213/5T 11.0 H 7.6 2.6 3.0 0.5496 15 33 133 70.0 1.15 3530 87.5 88.5 89.5 0.76 0.85 0.89 8.67
7.5 5.5 213/5T 22.0 H 7.3 2.6 3.0 0.9380 22 48 120 60.0 1.15 1770 90.2 91.0 91.7 0.64 0.76 0.82 9.07
254/6T 33.1 G 5.4 2.0 2.3 2.34 42 92 204 59.0 1.15 1175 89.5 89.5 91.0 0.58 0.70 0.76 9.98
213/5T 14.7 H 7.5 2.6 3.0 0.7188 12 26 161 70.0 1.15 3530 89.5 90.2 90.2 0.80 0.88 0.91 11.5
10 7.5 213/5T 29.4 H 7.0 2.5 3.0 1.07 15 33 130 60.0 1.15 1760 91.0 91.0 91.7 0.67 0.78 0.84 12.2
254/6T 44.1 G 5.4 2.1 2.3 2.83 30 66 234 59.0 1.15 1175 90.2 91.0 91.0 0.57 0.69 0.75 13.8
254/6T 22.0 G 6.8 2.0 3.0 0.8718 14 31 175 75.0 1.15 3525 89.5 91.0 91.0 0.73 0.83 0.87 17.4
15 11
254/6T 43.9 G 6.5 2.5 3.0 2.15 19 42 197 68.0 1.15 1770 91.0 92.4 92.4 0.64 0.76 0.82 18.2
254/6T 29.5 G 6.6 2.0 2.9 1.22 12 26 211 75.0 1.15 3515 90.0 91.0 91.0 0.81 0.88 0.91 22.7
20 15
254/6T 58.7 H 6.7 2.7 3.0 2.64 16 35 227 68.0 1.15 1765 91.7 92.4 93.0 0.66 0.77 0.82 24.7
25 18.5 254/6T 36.7 J 8.3 2.4 3.4 1.31 8 18 221 75.0 1.15 3530 91.0 91.7 91.7 0.77 0.85 0.89 28.5
Electrical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-15
Electrical Data
ODP Rolled Steel up to 254/6T Frame - Three Phase - General Purpose
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
143/5T 1.48 L 8.3 2.1 3.3 0.0643 22 48 25.4 62.0 1.15 3510 74.0 78.5 80.0 0.66 0.78 0.85 1.38
1 0.75 143/5T 2.94 L 8.0 2.9 3.6 0.1101 22 48 34.4 52.0 1.15 1760 81.5 84.0 85.5 0.51 0.65 0.73 1.51
143/5T 4.51 K 6.1 2.5 3.0 0.1419 24 53 35.3 49.0 1.15 1150 78.5 81.5 82.5 0.47 0.60 0.69 1.65
143/5T 2.21 K 8.6 2.1 3.3 0.0835 19 42 29.3 62.0 1.15 3510 81.5 84.0 84.0 0.73 0.83 0.89 1.85
1.5 1.1 143/5T 4.42 L 8.7 2.8 3.3 0.1426 15 33 41.9 52.0 1.15 1760 84.0 86.5 86.5 0.56 0.69 0.77 2.07
182/4T 6.67 J 6.5 2.0 3.1 0.2178 46 101 56.0 52.0 1.15 1165 84.0 85.5 86.5 0.51 0.63 0.71 2.25
143/5T 2.95 K 8.9 2.2 3.3 0.1151 14 31 36.8 62.0 1.15 3510 84.0 85.5 85.5 0.77 0.86 0.91 2.42
2 1.5 143/5T 5.96 K 7.7 2.6 3.2 0.1168 17 37 39.0 52.0 1.15 1740 85.5 86.5 86.5 0.61 0.74 0.81 2.69
182/4T 8.89 J 6.6 2.0 3.0 0.2800 33 73 66.1 52.0 1.15 1165 85.5 86.5 87.5 0.53 0.66 0.73 2.95
143/5T 4.47 J 8.0 2.3 3.0 0.1279 9 20 39.9 62.0 1.15 3480 84.0 85.5 85.5 0.76 0.86 0.90 3.59
3 2.2 182/4T 8.81 K 8.4 2.2 3.3 0.3092 15 33 65.9 55.0 1.15 1765 87.5 88.5 89.5 0.60 0.73 0.80 3.86
213/5T 13.2 H 5.9 2.1 2.6 0.8104 39 86 98.3 55.0 1.15 1175 86.5 87.5 88.5 0.56 0.68 0.75 4.16
182/4T 7.38 J 7.6 1.9 3.0 0.1386 12 26 58.7 65.0 1.15 3510 85.5 86.5 86.5 0.73 0.83 0.88 6.10
5 3.7 182/4T 14.7 J 7.2 2.0 3.1 0.4003 12 26 79.8 55.0 1.15 1760 88.5 88.5 89.5 0.63 0.76 0.82 6.33
213/5T 22.0 H 5.9 2.2 2.5 1.08 29 64 118 55.0 1.15 1175 88.5 89.5 89.5 0.58 0.70 0.77 6.74
182/4T 11.1 H 7.4 1.8 2.9 0.1818 10 22 69.9 65.0 1.15 3500 88.5 88.5 88.5 0.76 0.85 0.90 8.67
7.5 5.5
213/5T 22.0 H 7.2 2.4 3.2 1.03 13 29 116 59.0 1.15 1770 89.5 90.2 91.0 0.65 0.77 0.82 9.25
213/5T 14.7 H 6.8 2.0 2.8 0.4651 11 24 117 66.0 1.15 3535 88.5 89.5 89.5 0.74 0.84 0.88 12.0
10 7.5 213T 14.7 H 7.2 2.2 2.8 0.4881 15 33 121 68.0 1.15 3520 89.5 90.2 90.2 0.73 0.83 0.88 11.9
213/5T 29.3 H 7.0 2.5 3.5 1.30 14 31 137 59.0 1.15 1770 90.2 91.0 91.7 0.64 0.77 0.83 12.4
15 11 213/5T 22.0 G 6.8 2.1 2.8 0.5512 8 18 131 66.0 1.15 3535 90.2 90.2 90.2 0.77 0.86 0.89 17.2
Electrical Data
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
7.5 5.5 254T 32.9 H 6.7 2.6 3.0 2.29 16 35 240 59.0 1.25 1180 87.5 89.5 90.2 0.58 0.70 0.77 9.94
10 7.5 254/6T 43.9 H 6.8 2.3 3.0 3.53 17 37 300 59.0 1.25 1180 90.2 91.0 91.7 0.62 0.74 0.80 12.8
254T 43.9 G 6.4 2.4 2.8 2.72 17 37 289 62.0 1.25 1770 91.7 92.4 93.0 0.66 0.78 0.85 17.5
15 11
284T 65.9 G 6.3 2.6 2.6 4.80 16 35 337 59.0 1.25 1180 91.0 91.7 91.7 0.67 0.77 0.82 18.4
254T 29.3 G 6.3 2.0 2.8 0.8718 12 26 240 --- 1.25 3535 90.2 91.0 91.0 0.72 0.82 0.85 24.3
20 15 254/6T 58.7 G 6.4 2.2 2.8 3.13 12 26 320 62.0 1.25 1765 92.4 93.0 93.0 0.69 0.79 0.84 24.1
284/6T 88.0 G 6.4 2.3 2.6 6.89 15 33 410 59.0 1.25 1177 91.7 92.4 92.4 0.71 0.80 0.84 24.3
254/6T 36.6 G 6.5 2.0 2.8 1.13 11 24 276 --- 1.25 3535 91.0 91.7 91.7 0.77 0.85 0.88 28.8
25 18.5 284T 73.2 G 6.6 2.7 2.8 3.71 17 37 370 64.0 1.25 1770 93.0 93.6 93.6 0.69 0.80 0.84 29.5
324T 109 G 6.2 2.1 2.5 7.69 18 40 474 62.0 1.25 1183 91.7 92.4 93.0 0.65 0.76 0.81 30.8
284TS 43.8 G 6.3 1.8 2.8 1.59 10 22 324 73.0 1.25 3545 90.2 91.7 91.7 0.73 0.82 0.86 35.0
30 22 284/6T 87.8 G 6.6 2.8 2.8 4.52 18 40 421 64.0 1.25 1770 93.6 94.1 94.1 0.70 0.80 0.84 34.9
324/6T 131 G 6.3 2.0 2.4 9.56 17 37 545 62.0 1.25 1182 92.4 93.0 93.6 0.70 0.79 0.82 36.0
284/6TS 58.5 G 6.5 1.9 2.6 2.02 8 18 370 73.0 1.25 3540 91.7 92.4 92.4 0.76 0.84 0.87 46.8
40 30 324T 117 G 6.2 2.0 2.4 5.69 13 29 472 66.0 1.25 1775 93.6 94.1 94.1 0.70 0.80 0.84 47.6
364/5T 175 G 6.4 2.0 2.3 21.8 22 48 787 68.0 1.25 1185 93.6 94.1 94.1 0.74 0.82 0.85 47.1
324TS 72.8 G 6.3 2.0 2.2 3.02 14 31 450 75.0 1.25 3560 91.7 93.0 93.0 0.73 0.82 0.85 58.7
50 37 324/6T 146 G 6.3 2.4 2.4 7.08 11 24 542 66.0 1.25 1775 94.1 94.5 94.5 0.70 0.80 0.84 58.5
364/5T 219 G 6.7 2.2 2.4 23.9 15 33 820 68.0 1.25 1185 93.6 94.1 94.1 0.74 0.82 0.85 58.1
324/6TS 87.3 G 6.3 2.2 2.3 3.82 12 26 514 75.0 1.25 3560 92.4 93.0 93.6 0.73 0.82 0.85 71.0
60 45 364/5T 175 G 6.5 2.0 2.4 15.6 19 42 785 69.0 1.25 1780 94.5 95.0 95.0 0.73 0.82 0.85 69.9
404/5T 262 G 6.7 2.4 2.5 29.4 16 35 975 68.0 1.25 1185 91.7 94.5 94.5 0.73 0.82 0.85 70.3
364/5TS 109 G 6.6 2.0 2.5 6.40 19 42 736 84.0 1.25 3560 91.7 93.0 93.6 0.77 0.84 0.87 84.8
75 55 364/5T 218 G 6.8 2.2 2.6 16.8 14 31 811 69.0 1.25 1780 94.5 95.0 95.0 0.73 0.82 0.85 85.5
404/5T 328 G 6.7 2.4 2.7 31.6 11 24 1008 68.0 1.25 1185 94.1 94.5 94.5 0.72 0.81 0.85 85.9
364/5TS 146 G 6.6 1.8 2.3 7.20 13 29 774 84.0 1.25 3555 92.4 93.6 93.6 0.77 0.84 0.87 116
100 75 404/5T 291 G 6.8 2.0 2.5 21.9 12 26 992 69.0 1.25 1780 95.0 95.4 95.4 0.75 0.83 0.86 115
444/5T 435 G 6.1 2.0 2.5 60.6 13 29 1301 69.0 1.25 1190 94.5 95.0 95.0 0.61 0.71 0.78 127
404/5TS 182 G 6.8 1.7 2.6 8.23 12 26 886 84.0 1.25 3557 93.0 94.1 94.1 0.79 0.86 0.88 136
125 90 404/5T 364 G 6.9 2.7 2.6 25.5 10 22 1072 69.0 1.25 1780 95.0 95.4 95.4 0.75 0.83 0.86 138
444/5T 545 G 6.3 2.1 2.5 63.2 11 24 1389 69.0 1.25 1189 94.5 95.0 95.0 0.59 0.71 0.77 154
404/5TS 219 G 6.6 2.0 2.5 8.80 9 20 931 84.0 1.25 3552 93.6 94.1 94.1 0.79 0.86 0.88 167
150 110 444/5T 436 G 6.5 2.0 2.4 42.1 22 48 1374 78.0 1.25 1784 95.4 95.8 95.8 0.74 0.82 0.85 170
Electrical Data
444/5T 654 G 6.4 2.1 2.6 79.0 11 24 1563 69.0 1.25 1188 94.5 95.0 95.4 0.62 0.73 0.79 183
444/5TS 290 G 6.5 1.4 2.3 23.8 21 46 1400 85.0 1.15 3570 93.0 94.5 95.0 0.79 0.86 0.88 225
200 150 444/5T 581 G 6.6 2.1 2.5 46.4 14 31 1446 78.0 1.15 1783 95.4 95.8 95.8 0.72 0.80 0.84 234
447/9T 874 F 5.8 2.0 2.2 98.2 18 40 2260 75.0 1.15 1185 95.0 95.4 95.4 0.69 0.78 0.82 241
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-17
Electrical Data
ODP Cast Iron - 254 Frame and Larger - Three Phase - General Purpose - continued
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
444/5TS 363 G 6.7 1.5 2.3 26.9 16 35 1488 85.0 1.15 3570 93.6 94.5 95.0 0.79 0.85 0.88 278
250 185 444/5T 728 G 6.4 2.1 2.4 50.9 9 20 1517 78.0 1.15 1780 95.4 95.8 95.8 0.72 0.80 0.84 289
447/9T 1093 G 6.5 2.2 2.4 115 18 40 2481 75.0 1.15 1185 95.4 95.8 95.8 0.67 0.77 0.81 299
444/5TS 435 G 6.5 1.5 2.4 28.6 12 26 1535 85.0 1.15 3570 95.0 95.4 95.4 0.80 0.86 0.88 329
300 220 447/9T 873 G 7.1 2.2 2.3 56.1 10 22 2150 78.0 1.15 1780 95.8 95.8 95.8 0.81 0.87 0.89 324
447/9T* 1306 H 6.7 2.4 2.8 131 18 40 2701 75.0 1.15 1190 95.4 95.8 95.8 0.62 0.73 0.79 365
447/9TS 509 G 6.5 1.7 2.5 35.7 14 31 1874 87.0 1.15 3565 95.0 95.4 95.4 0.83 0.88 0.89 384
350 260 447/9T 1019 G 6.6 2.0 2.3 66.1 10 22 2370 78.0 1.15 1780 95.8 95.8 95.8 0.76 0.83 0.86 396
5010/11 1524 G 6.2 2.0 2.1 217 15 33 3528 78.0 1.15 1190 95.4 95.8 95.8 0.71 0.80 0.84 406
447/9TS 581 G 6.5 1.7 2.5 39.1 14 31 2040 87.0 1.15 3565 95.4 95.8 95.8 0.83 0.88 0.89 442
400 300 447/9T 1164 G 6.8 2.3 2.3 77.6 9 20 2591 78.0 1.15 1780 95.8 95.8 95.8 0.78 0.85 0.87 452
5010/11 1741 G 6.3 2.1 2.1 265 15 33 3749 78.0 1.15 1190 95.4 95.8 95.8 0.71 0.80 0.84 468
447/9TS 654 G 6.8 1.8 2.5 43.6 14 31 2128 87.0 1.15 3565 95.8 96.2 96.2 0.84 0.89 0.90 478
450 330 5010/11 1305 G 6.8 2.2 2.2 118 18 40 3087 80.0 1.15 1787 95.4 95.8 96.2 0.73 0.82 0.85 507
5010/11* 1959 G 6.5 2.3 2.3 265 15 33 3749 78.0 1.00 1190 95.4 95.8 95.8 0.68 0.78 0.82 527
447/9TS 726 G 7.1 1.9 2.5 46.9 14 31 2194 87.0 1.15 3570 95.8 96.2 96.2 0.84 0.89 0.90 536
500 370 5010/11 1450 H 7.0 2.3 2.3 131 17 37 3308 80.0 1.15 1787 95.4 95.8 96.2 0.73 0.82 0.85 568
447/9TS 799 G 7.2 2.0 2.5 50.3 14 31 2326 87.0 1.15 3565 95.8 96.2 96.2 0.84 0.89 0.90 580
550 400 5010/11 1595 G 6.8 2.2 2.2 144 16 35 3528 80.0 1.15 1787 95.6 96.2 96.2 0.76 0.84 0.87 600
447/9TS 872 H 7.9 1.9 2.7 53.6 14 31 2414 87.0 1.15 3565 95.8 96.2 96.2 0.81 0.88 0.89 645
600 440
5010/11* 1740 G 6.8 2.2 2.2 157 12 26 3749 80.0 1.00 1787 95.8 96.2 96.2 0.76 0.84 0.87 660
5010/11 943 G 6.5 1.8 2.3 73.3 12 26 2977 89.0 1.15 3570 95.0 95.4 96.2 0.78 0.85 0.88 712
650 480
L5010/11 1887 F 6.0 1.5 2.2 219 25 55 5292 80.0 1.15 1785 95.4 96.2 96.2 0.76 0.83 0.85 737
5010/11 1016 G 6.8 2.0 2.4 78.5 16 35 3418 89.0 1.15 3570 95.4 95.8 96.2 0.79 0.86 0.88 764
700 515
L5010/11 2032 H 7.0 1.8 2.3 106 15 33 5954 80.0 1.15 1785 95.4 96.2 96.2 0.70 0.80 0.84 800
5010/11 1085 H 7.5 2.1 2.6 89.0 12 26 3308 89.0 1.15 3580 95.4 96.0 96.0 0.76 0.83 0.87 827
750 560
L5010/11 2177 G 6.5 1.7 2.3 248 25 55 5954 80.0 1.15 1785 95.4 96.2 96.2 0.73 0.81 0.84 870
5010/11 1159 H 7.4 2.0 2.5 89.0 12 26 3528 89.0 1.15 3575 95.8 96.2 96.2 0.78 0.85 0.87 885
800 590
L5010/11 2322 F 6.2 1.6 2.2 248 25 55 5954 80.0 1.00 1785 95.4 96.2 96.2 0.74 0.82 0.85 906
Electrical Data
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
143T 1.48 M 9.0 3.0 4.0 0.0415 40 88 61.7 68.0 1.15 3495 75.5 80.0 81.5 0.65 0.76 0.82 1.41
143T 2.94 L 8.6 2.9 3.7 0.0975 18 40 61.7 51.0 1.15 1760 80.0 82.5 85.5 0.57 0.70 0.77 1.43
1 0.75
145T 4.52 J 5.8 2.0 2.5 0.1595 30 66 52.9 49.0 1.15 1145 78.5 81.5 82.5 0.54 0.66 0.74 1.54
182T 5.92 M 6.0 3.0 3.5 0.3991 22 48 112 50.0 1.15 875 74.0 77.0 78.5 0.32 0.42 0.52 2.30
143T 2.22 M 9.2 3.0 4.0 0.0413 20 44 61.7 68.0 1.15 3500 78.5 82.5 84.0 0.62 0.73 0.80 2.05
145T 4.42 L 8.9 2.7 3.5 0.1303 14 31 70.6 51.0 1.15 1760 81.5 85.5 86.5 0.58 0.70 0.78 2.05
1.5 1.1
182T 6.67 K 7.2 2.6 3.3 0.4212 35 77 118 52.0 1.15 1165 84.5 86.5 87.5 0.47 0.59 0.68 2.32
184T 9.04 J 5.5 2.4 2.6 0.5223 17 37 128 50.0 1.15 860 80.0 81.5 82.5 0.42 0.54 0.62 2.70
145T 2.96 M 9.4 3.5 4.0 0.0551 15 33 66.1 68.0 1.15 3495 80.0 84.0 85.5 0.64 0.76 0.82 2.69
145T 5.92 K 7.9 2.5 3.2 0.1595 11 24 72.8 51.0 1.15 1750 84.0 85.5 86.5 0.60 0.73 0.80 2.72
2 1.5
184T 8.89 K 7.0 2.6 3.3 0.5323 35 77 129 52.0 1.15 1165 84.5 86.5 88.5 0.47 0.58 0.68 3.13
213T 11.9 M 7.6 2.7 3.0 1.31 35 77 165 52.0 1.15 870 80.0 82.5 84.0 0.45 0.57 0.65 3.45
182T 4.43 K 8.4 2.5 4.0 0.1471 30 66 90.4 69.0 1.15 3510 82.5 85.5 86.5 0.73 0.81 0.85 3.76
182T 8.83 K 8.0 2.5 3.2 0.2781 28 62 115 56.0 1.15 1760 87.5 88.5 89.5 0.59 0.71 0.79 3.91
3 2.2
213T 13.2 K 7.0 2.2 2.5 1.20 58 128 165 55.0 1.15 1175 86.5 88.5 89.5 0.50 0.62 0.70 4.41
215T 18.0 K 7.1 2.1 2.6 1.79 32 70 201 52.0 1.15 865 84.0 85.5 85.5 0.54 0.66 0.74 4.36
184T 7.42 J 7.5 2.5 3.8 0.1889 26 57 106 69.0 1.15 3490 85.5 87.5 88.5 0.70 0.81 0.86 6.10
184T 14.8 K 8.2 2.7 3.3 0.3695 17 37 130 56.0 1.15 1755 86.5 88.5 89.5 0.59 0.71 0.79 6.57
5 3.7
215T 22.1 J 6.8 1.7 2.6 1.47 57 125 162 55.0 1.15 1170 88.5 89.5 89.5 0.58 0.70 0.76 6.83
254T 29.4 H 5.3 2.1 2.7 3.41 21 46 313 54.0 1.15 880 84.0 86.5 87.5 0.46 0.58 0.67 7.93
213T 11.1 H 7.0 2.2 3.0 0.4696 23 51 190 72.0 1.15 3510 85.5 88.5 89.5 0.81 0.87 0.90 8.57
213T 22.0 H 6.7 2.4 2.8 1.38 12 26 152 58.0 1.15 1765 88.5 90.2 91.7 0.60 0.73 0.80 9.41
7.5 5.5
254T 33.1 J 7.0 2.7 3.2 3.32 25 55 309 59.0 1.15 1175 88.5 90.2 91.0 0.58 0.71 0.78 9.73
256T 44.2 H 5.3 2.1 2.8 4.15 23 51 353 54.0 1.15 880 86.5 87.5 87.5 0.48 0.60 0.68 11.6
215T 14.8 H 6.9 2.1 2.8 0.5512 150 330 201 72.0 1.15 3510 89.5 90.2 90.2 0.81 0.88 0.90 11.6
215T 29.4 J 7.5 2.5 3.0 1.34 15 33 207 58.0 1.15 1765 90.2 91.0 91.7 0.62 0.75 0.81 12.7
10 7.5
256T 44.1 J 7.2 2.7 3.1 4.15 26 57 364 59.0 1.15 1175 89.5 90.2 91.0 0.60 0.70 0.78 13.3
284T 58.9 H 6.0 2.5 2.4 7.20 30 66 467 54.0 1.15 880 91.0 91.7 91.0 0.62 0.73 0.78 13.3
254T 22.0 G 6.8 2.0 2.7 1.19 31 68 318 75.0 1.15 3540 90.0 90.5 91.0 0.74 0.83 0.87 17.4
254T 43.9 J 7.3 3.0 3.0 2.31 26 57 329 69.0 1.15 1770 90.2 91.7 92.4 0.65 0.75 0.81 18.4
15 11
284T 65.9 H 7.2 2.5 2.6 7.07 25 55 463 59.0 1.15 1180 91.0 91.7 91.7 0.74 0.83 0.86 17.5
286T 88.3 G 6.1 2.4 2.3 8.18 37 81 507 54.0 1.15 880 91.0 91.7 91.0 0.66 0.76 0.80 19.0
Electrical Data
256T 29.4 G 6.2 2.0 2.5 1.45 26 57 357 75.0 1.15 3530 90.2 91.0 91.0 0.79 0.86 0.89 23.2
256T 58.5 J 7.5 3.0 3.0 2.89 20 44 364 69.0 1.15 1770 91.7 92.4 93.0 0.63 0.75 0.81 25.0
20 15
286T 87.8 H 7.2 2.5 2.7 8.02 22 48 501 59.0 1.15 1180 91.7 91.7 91.7 0.70 0.80 0.85 24.2
324T 118 G 5.3 2.3 2.3 9.37 25 55 606 56.0 1.15 880 91.7 92.4 92.4 0.56 0.67 0.74 27.5
284TS 36.4 K 9.0 2.2 2.8 2.58 58 128 452 75.0 1.15 3555 91.7 92.4 92.4 0.78 0.85 0.88 28.6
284T 73.0 J 8.2 3.0 3.0 4.54 20 44 472 68.0 1.15 1775 92.4 93.6 93.6 0.67 0.78 0.83 29.9
25 18.5
324T 110 G 6.4 2.3 2.6 10.8 25 55 639 62.0 1.15 1180 92.4 93.0 93.0 0.65 0.76 0.82 30.4
326T 147 G 5.1 2.4 2.4 11.9 20 44 673 56.0 1.15 880 91.0 92.4 92.4 0.51 0.63 0.71 35.4
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-19
Electrical Data
Explosion Proof - Three Phase - continued
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
286TS 43.8 H 7.7 2.6 3.0 3.08 14 31 529 75.0 1.15 3545 92.4 93.0 93.0 0.78 0.86 0.88 33.7
286T 87.8 J 8.2 3.0 3.0 5.16 17 37 512 68.0 1.15 1770 93.0 93.6 93.6 0.66 0.77 0.82 36.0
30 22
326T 132 H 7.1 2.4 2.7 12.5 25 55 695 62.0 1.15 1180 92.4 93.0 93.0 0.63 0.75 0.81 36.7
364/5T 176 G 5.7 2.2 2.2 23.5 14 31 911 62.0 1.15 885 92.4 93.0 93.0 0.64 0.73 0.77 38.5
324TS 58.3 G 6.6 2.7 2.7 4.90 43 95 516 81.0 1.15 3555 92.4 93.6 93.6 0.80 0.86 0.88 45.8
324T 116 J 7.7 2.7 3.0 8.17 19 42 650 71.0 1.15 1780 93.0 94.1 94.1 0.66 0.77 0.83 48.2
40 30
364/5T 175 H 7.0 2.3 2.3 29.0 24 53 1010 65.0 1.15 1185 93.6 94.1 94.1 0.72 0.80 0.85 47.1
364/5T 234 F 5.2 2.2 2.2 29.0 25 55 1058 62.0 1.15 885 93.0 93.6 93.6 0.64 0.73 0.77 52.2
326TS 73.0 H 7.2 2.1 2.1 5.42 33 73 728 81.0 1.15 3550 92.4 93.6 94.1 0.82 0.88 0.89 55.5
326T 146 H 7.3 2.6 2.8 9.16 20 44 706 71.0 1.15 1780 93.6 94.5 94.5 0.65 0.76 0.81 60.6
50 37
364/5T 219 H 7.4 2.6 2.8 29.4 20 44 1036 65.0 1.15 1185 93.6 94.1 94.1 0.71 0.81 0.85 58.1
404/5T 293 J 7.3 2.2 2.1 34.6 12 26 1257 62.0 1.15 885 92.4 93.0 93.6 0.67 0.73 0.73 68.0
364/5TS 87.3 G 6.4 2.0 2.5 9.96 60 132 1017 85.0 1.15 3560 92.4 93.6 94.1 0.79 0.86 0.88 68.2
364/5T 175 H 7.0 2.5 2.5 20.8 20 44 1014 75.0 1.15 1780 94.1 94.5 95.0 0.72 0.82 0.87 68.3
60 45
404/5T 262 H 6.9 2.5 2.7 36.9 29 64 1213 65.0 1.15 1185 93.6 94.5 94.5 0.73 0.82 0.85 70.3
404/5T 351 G 6.2 1.8 2.2 38.3 25 55 1279 62.0 1.15 885 92.4 93.0 93.0 0.65 0.75 0.80 75.9
364/5TS 109 G 7.0 2.3 2.6 9.96 18 40 1025 85.0 1.15 3560 93.0 94.1 94.1 0.81 0.87 0.89 82.4
364/5T 218 G 7.0 2.4 2.9 23.3 16 35 937 75.0 1.15 1780 94.5 95.0 95.4 0.74 0.83 0.87 83.2
75 55
404/5T 329 J 7.7 2.5 2.6 40.2 15 33 1257 65.0 1.15 1180 94.1 95.0 94.5 0.72 0.81 0.84 87.0
444/5T 437 G 6.1 1.7 2.1 73.6 18 40 1912 64.0 1.15 890 93.6 94.1 93.6 0.66 0.76 0.80 92.2
404/5TS 146 G 6.5 2.0 2.6 13.2 21 46 1206 85.0 1.15 3550 93.6 95.0 95.0 0.85 0.89 0.90 110
404/5T 291 H 7.2 2.7 3.0 26.4 13 29 1222 75.0 1.15 1780 94.5 95.0 95.4 0.72 0.82 0.87 113
100 75
444/5T 435 H 6.8 2.3 2.6 87.3 49 108 1896 70.0 1.15 1190 94.1 95.0 95.0 0.66 0.76 0.82 121
444/5T 582 G 6.1 1.7 2.0 87.3 16 35 2053 64.0 1.15 890 94.1 94.5 94.1 0.68 0.77 0.80 125
444/5TS 181 F 6.6 2.0 2.5 31.2 22 48 1940 86.0 1.15 3570 93.0 94.5 95.0 0.83 0.89 0.90 132
444/5T 363 G 6.4 2.0 2.2 57.2 18 40 2026 76.0 1.15 1785 95.0 95.4 95.4 0.76 0.83 0.86 142
125 90 444/5T 547 H 7.4 2.3 2.4 104 41 90 2293 70.0 1.15 1185 94.5 95.0 95.0 0.67 0.76 0.82 150
447T 728 G 6.1 1.7 2.0 104 18 40 2337 66.0 1.15 890 94.5 95.0 94.5 0.66 0.76 0.80 154
504/5T 728 G 6.1 1.7 2.0 104 18 40 2337 66.0 1.15 890 94.5 95.0 94.5 0.66 0.76 0.80 154
444/5TS 218 G 7.0 2.0 2.5 39.1 31 68 1985 86.0 1.15 3570 93.6 95.0 95.4 0.85 0.89 0.90 161
444/5T 437 G 6.3 2.2 2.5 66.7 22 48 2095 76.0 1.15 1780 95.0 95.8 95.8 0.72 0.81 0.85 170
447T 656 H 7.5 2.6 2.6 134 42 92 2540 73.0 1.15 1185 95.0 95.8 95.8 0.68 0.78 0.83 174
Electrical Data
150 110
504/5T 656 H 7.5 2.6 2.6 134 42 92 2540 73.0 1.15 1185 95.0 95.8 95.8 0.68 0.78 0.83 174
447T 873 G 6.0 1.7 2.0 125 18 40 2646 66.0 1.15 890 94.5 95.0 94.5 0.68 0.77 0.82 179
504/5T 873 G 6.0 1.7 2.0 125 18 40 2646 66.0 1.15 890 94.5 95.0 94.5 0.68 0.77 0.82 179
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
447TS 290 H 7.3 2.2 2.6 44.7 37 81 2492 87.0 1.15 3570 94.1 95.4 95.8 0.84 0.88 0.89 221
504/5TS 290 H 7.3 2.2 2.6 44.7 37 81 2492 88.0 1.15 3570 94.1 95.4 95.8 0.84 0.88 0.89 221
447T 582 H 7.0 2.3 2.4 76.2 25 55 2426 82.0 1.15 1780 95.8 96.2 96.2 0.70 0.80 0.85 230
504/5T 582 H 7.0 2.3 2.4 76.2 25 55 2426 82.0 1.15 1780 95.8 96.2 96.2 0.70 0.80 0.85 230
200 150
447T 871 J 7.8 2.7 2.8 134 14 31 2615 73.0 1.15 1190 94.5 95.4 95.8 0.60 0.73 0.79 249
504/5T 871 J 7.8 2.7 2.8 134 14 31 2615 73.0 1.15 1190 94.5 95.4 95.8 0.60 0.73 0.79 249
449T 1164 K 7.5 2.8 3.0 161 13 29 3581 66.0 1.15 890 92.4 94.5 95.0 0.52 0.63 0.70 283
586/7T 1164 G 5.7 1.2 2.1 350 65 143 4167 75.0 1.15 890 94.1 94.5 95.0 0.60 0.71 0.76 261
447TS 363 H 8.0 2.4 2.8 50.3 18 40 2492 87.0 1.15 3570 95.0 95.4 95.8 0.83 0.89 0.90 269
504/5TS 363 H 8.0 2.4 2.8 50.3 18 40 2492 88.0 1.15 3570 95.0 95.4 95.8 0.83 0.89 0.90 269
447T 728 H 7.0 2.1 2.3 89.6 30 66 2646 82.0 1.15 1780 95.4 96.2 96.2 0.72 0.81 0.85 284
250 185 504/5T 728 H 7.0 2.1 2.3 89.6 30 66 2646 77.0 1.15 1780 95.4 96.2 96.2 0.72 0.81 0.85 284
586/7T 1088 G 6.0 1.8 2.1 226 33 73 3859 77.0 1.15 1190 93.6 95.4 95.8 0.67 0.75 0.80 303
449T 1088 J 8.1 2.8 3.0 145 10 22 3188 70.0 1.15 1190 95.0 95.4 95.8 0.64 0.76 0.81 299
586/7T 1455 G 5.8 1.0 2.1 395 26 57 4410 75.0 1.15 890 94.1 94.5 95.4 0.60 0.71 0.77 316
586/7TS 434 G 6.6 1.3 2.2 123 34 75 4410 85.0 1.15 3580 94.5 95.4 95.8 0.86 0.87 0.88 328
449TS 435 J 8.4 2.8 3.4 58.1 15 33 3308 84.0 1.15 3575 94.5 95.4 95.8 0.82 0.88 0.90 320
586/7T 868 G 6.8 1.8 2.1 161 50 110 4079 83.0 1.15 1790 95.0 95.8 96.2 0.78 0.84 0.85 338
300 220 449T 871 H 8.0 2.8 2.9 89.6 14 31 3087 80.0 1.15 1785 95.4 95.8 96.2 0.74 0.83 0.86 334
586/7T 1306 G 6.1 1.8 2.1 277 35 77 4190 77.0 1.15 1190 93.6 95.4 95.8 0.68 0.75 0.82 351
449T 1306 J 7.9 2.8 3.0 145 7 15 3197 70.0 1.15 1190 95.0 95.4 95.8 0.66 0.77 0.82 351
586/7T 1737 G 6.2 1.4 2.1 462 24 53 4818 75.0 1.15 895 95.0 95.0 95.4 0.60 0.72 0.77 376
586/7TS 507 G 6.6 1.3 2.2 136 35 77 4410 85.0 1.15 3580 94.5 95.4 95.8 0.86 0.87 0.88 388
449TS 507 J 8.7 2.8 3.4 68.1 14 31 3638 84.0 1.15 3575 95.0 95.8 95.8 0.82 0.88 0.90 379
586/7T 1013 H 7.3 2.3 2.3 179 32 70 4234 83.0 1.15 1790 95.0 95.8 96.2 0.77 0.84 0.86 395
350 260
449T 1016 J 8.2 2.8 2.9 118 14 31 3418 80.0 1.15 1785 95.4 95.8 96.2 0.70 0.80 0.84 404
586/7T 1524 G 6.3 2.1 2.1 328 29 64 4520 77.0 1.15 1190 95.4 95.8 95.8 0.67 0.77 0.81 421
586/7T* 2037 G 5.9 1.1 2.0 484 25 55 4895 75.0 1.00 890 94.1 94.5 95.4 0.60 0.64 0.78 439
586/7T 1158 G 6.4 1.8 2.0 179 18 40 4366 83.0 1.15 1790 95.4 96.2 96.2 0.80 0.84 0.85 460
400 300
586/7T 1741 G 6.0 2.0 2.0 368 71 156 4983 77.0 1.15 1190 93.6 95.0 95.8 0.70 0.78 0.82 479
586/7T* 1302 G 6.5 1.8 2.0 213 24 53 4586 83.0 1.15 1790 95.8 96.2 96.2 0.81 0.85 0.86 501
450 330
586/7T* 1959 G 6.0 1.5 2.1 368 34 75 5005 77.0 1.00 1190 93.6 95.0 95.8 0.69 0.77 0.80 540
Electrical Data
500 370 586/7T 1447 G 6.3 2.1 2.3 256 25 55 4829 83.0 1.00 1790 95.8 96.2 96.2 0.81 0.84 0.85 568
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-21
Electrical Data
Fractional - Three Phase - TEFC - NEMA Premium®
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
W56 0.370 M 7.4 3.5 4.0 0.0147 30 66 15.0 65.0 1.15 3460 55.0 62.0 66.0 0.60 0.70 0.75 0.456
48 0.370 M 7.4 3.5 4.0 0.0147 30 66 15.0 65.0 1.15 3460 55.0 62.0 66.0 0.60 0.70 0.75 0.456
0.25 0.18 W56 0.740 K 5.6 2.4 3.2 0.0280 28 62 14.6 50.0 1.15 1740 59.5 66.0 70.0 0.48 0.60 0.69 0.468
48 0.740 K 5.6 2.4 3.2 0.0280 28 62 14.6 50.0 1.15 1740 59.5 66.0 70.0 0.48 0.60 0.69 0.468
56 1.12 J 4.7 1.9 3.0 0.0710 40 88 25.6 50.0 1.15 1160 62.0 68.0 72.0 0.42 0.53 0.62 0.506
W56 0.500 L 7.1 3.2 3.7 0.0147 28 62 15.0 65.0 1.15 3450 59.5 66.0 72.0 0.61 0.71 0.76 0.573
48 0.500 L 7.1 3.2 3.7 0.0147 28 62 15.0 65.0 1.15 3450 59.5 66.0 72.0 0.61 0.71 0.76 0.573
0.33 0.25 W56 0.980 L 6.2 2.6 3.5 0.0358 22 48 16.5 50.0 1.15 1740 66.0 72.0 74.0 0.46 0.58 0.68 0.624
48 0.980 L 6.2 2.6 3.5 0.0358 22 48 16.5 50.0 1.15 1740 66.0 72.0 74.0 0.46 0.58 0.68 0.624
56 1.47 L 5.3 2.2 3.3 0.0888 30 66 28.2 50.0 1.15 1160 64.0 70.0 72.0 0.41 0.52 0.61 0.714
W56 0.750 L 7.7 3.3 3.6 0.0190 18 40 17.4 65.0 1.15 3435 68.0 72.0 74.0 0.64 0.75 0.80 0.784
48 0.750 L 7.7 3.3 3.6 0.0190 18 40 17.4 65.0 1.15 3435 68.0 72.0 74.0 0.64 0.75 0.80 0.784
0.5 0.37 W56 1.50 J 6.4 2.3 3.1 0.0520 20 44 20.9 50.0 1.15 1730 74.0 77.0 78.5 0.54 0.67 0.76 0.778
48 1.50 J 6.4 2.3 3.1 0.0520 20 44 20.9 50.0 1.15 1730 74.0 77.0 78.5 0.54 0.67 0.76 0.778
56 2.23 K 5.6 2.4 3.3 0.1065 26 57 30.9 50.0 1.15 1160 68.0 74.0 75.5 0.41 0.53 0.63 0.976
W56 1.13 L 8.1 3.5 3.6 0.0211 16 35 18.3 65.0 1.15 3440 70.0 75.5 77.0 0.62 0.74 0.80 1.12
48 1.13 L 8.1 3.5 3.6 0.0211 16 35 18.3 65.0 1.15 3440 70.0 75.5 77.0 0.62 0.74 0.80 1.12
0.75 0.55
56 2.21 L 7.7 2.4 3.6 0.0842 16 35 30.2 52.0 1.15 1760 75.5 80.0 81.5 0.49 0.62 0.71 1.19
56H 3.35 K 6.5 2.9 3.7 0.1419 40 88 36.2 50.0 1.15 1160 77.0 81.5 82.5 0.43 0.55 0.65 1.29
56 1.48 K 7.8 2.0 3.0 0.0643 22 48 26.2 68.0 1.15 3510 72.0 77.0 78.5 0.65 0.76 0.83 1.44
W56 1.51 M 8.8 3.6 3.8 0.0254 10 22 20.5 65.0 1.15 3435 74.0 77.0 78.5 0.63 0.75 0.80 1.50
1 0.75 48 1.51 M 8.8 3.6 3.8 0.0254 10 22 20.5 65.0 1.15 3435 74.0 77.0 78.5 0.63 0.75 0.80 1.50
56 2.94 M 8.6 2.8 3.0 0.1232 19 42 37.9 52.0 1.15 1765 82.5 84.0 85.5 0.52 0.66 0.75 1.47
56H 4.52 J 5.8 2.3 2.8 0.1597 31 68 38.6 50.0 1.15 1145 80.0 82.5 82.5 0.50 0.63 0.72 1.58
56 2.21 L 9.1 2.3 3.0 0.1023 17 37 34.2 68.0 1.15 3520 80.0 82.5 84.0 0.71 0.82 0.88 1.87
1.5 1.1
56H 4.44 K 8.2 2.7 3.0 0.1101 21 46 37.9 52.0 1.15 1750 85.5 86.5 86.5 0.59 0.72 0.79 2.02
56H 2.94 L 9.9 2.5 3.0 0.1279 13 29 40.1 68.0 1.15 3520 82.5 85.5 85.5 0.73 0.83 0.89 2.47
2 1.5
56H 5.94 K 8.2 2.7 3.0 0.1296 15 33 42.3 52.0 1.15 1745 85.5 87.5 86.5 0.60 0.73 0.80 2.72
3 2.2 56H 4.44 K 9.5 3.0 3.8 0.1663 10 22 48.1 68.0 1.15 3500 84.0 86.5 86.5 0.78 0.87 0.91 3.51
Electrical Data
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
W56 0.480 L 5.1 2.4 2.9 0.0240 43 95 13.5 50.0 1.15 1735 50.5 59.5 62.0 0.48 0.58 0.67 0.363
48 0.480 L 5.1 2.4 2.9 0.0240 43 95 13.5 50.0 1.15 1735 50.5 59.5 62.0 0.48 0.58 0.67 0.363
0.16 0.12
W56 0.730 J 3.9 1.9 2.5 0.0280 43 95 14.3 48.0 1.15 1135 46.0 55.0 59.5 0.45 0.56 0.65 0.389
48 0.730 J 3.9 1.9 2.5 0.0280 43 95 14.3 48.0 1.15 1135 46.0 55.0 59.5 0.45 0.56 0.65 0.389
56 0.370 L 6.4 2.5 3.0 0.0389 60 132 17.2 68.0 1.15 3475 46.0 52.5 57.5 0.75 0.82 0.86 0.457
W56 0.380 L 6.0 2.8 3.0 0.0126 34 75 13.5 65.0 1.15 3430 48.0 57.5 59.5 0.62 0.71 0.78 0.487
48 0.380 L 6.0 2.8 3.0 0.0126 34 75 13.5 65.0 1.15 3430 48.0 57.5 59.5 0.62 0.71 0.78 0.487
56 0.730 M 6.3 2.4 3.0 0.0453 38 84 18.1 52.0 1.15 1765 57.5 66.0 70.0 0.43 0.54 0.62 0.521
0.25 0.18 W56 0.750 K 5.3 2.4 2.9 0.0280 30 66 14.3 50.0 1.15 1735 55.0 62.0 66.0 0.48 0.59 0.68 0.503
48 0.750 K 5.3 2.4 2.9 0.0280 30 66 14.3 50.0 1.15 1735 55.0 62.0 66.0 0.48 0.59 0.68 0.503
56 1.12 K 5.1 2.3 3.0 0.0710 46 101 19.0 50.0 1.15 1160 55.0 64.0 68.0 0.41 0.52 0.61 0.545
W56 1.14 J 4.2 2.0 2.5 0.0358 26 57 16.1 48.0 1.15 1135 50.5 59.5 62.0 0.45 0.56 0.65 0.561
48 1.14 J 4.2 2.0 2.5 0.0358 26 57 16.1 48.0 1.15 1135 50.5 59.5 62.0 0.45 0.56 0.65 0.561
56 0.490 L 6.4 2.5 3.0 0.0389 40 88 17.2 68.0 1.15 3485 48.0 57.5 62.0 0.72 0.79 0.84 0.602
W56 0.500 L 6.1 2.9 3.0 0.0126 28 62 13.5 65.0 1.15 3425 52.5 59.5 62.0 0.60 0.70 0.77 0.657
48 0.500 L 6.1 2.9 3.0 0.0126 28 62 13.5 65.0 1.15 3425 52.5 59.5 62.0 0.60 0.70 0.77 0.657
56 0.970 M 7.1 2.3 3.0 0.0517 31 68 19.4 52.0 1.15 1765 64.0 72.0 74.0 0.47 0.58 0.68 0.624
0.33 0.25 W56 0.990 K 5.4 2.3 2.7 0.0318 21 46 15.2 50.0 1.15 1730 57.5 64.0 68.0 0.48 0.60 0.70 0.659
48 0.990 K 5.4 2.3 2.7 0.0318 21 46 15.2 50.0 1.15 1730 57.5 64.0 68.0 0.48 0.60 0.70 0.659
56 1.47 L 5.5 2.4 3.0 0.0888 36 79 21.8 50.0 1.15 1160 59.5 68.0 70.0 0.42 0.53 0.62 0.723
W56 1.51 H 4.1 1.8 2.3 0.0439 22 48 17.9 48.0 1.15 1130 55.0 62.0 64.0 0.48 0.59 0.69 0.711
48 1.51 H 4.1 1.8 2.3 0.0439 22 48 17.9 48.0 1.15 1130 55.0 62.0 64.0 0.48 0.59 0.69 0.711
56 0.740 L 7.0 2.6 3.0 0.0453 35 77 19.0 68.0 1.15 3500 55.0 62.0 68.0 0.67 0.75 0.81 0.843
W56 0.760 K 6.3 2.9 2.9 0.0147 20 44 14.3 65.0 1.15 3400 59.5 66.0 68.0 0.61 0.73 0.80 0.854
48 0.760 K 6.3 2.9 2.9 0.0147 20 44 14.3 65.0 1.15 3400 59.5 66.0 68.0 0.61 0.73 0.80 0.854
56 1.47 L 7.0 2.4 3.0 0.0584 20 44 20.9 52.0 1.15 1760 68.0 74.0 77.0 0.48 0.61 0.70 0.862
0.5 0.37 W56 1.50 K 6.0 2.6 2.8 0.0399 16 35 17.0 50.0 1.15 1730 62.0 70.0 72.0 0.49 0.62 0.72 0.896
48 1.50 K 6.0 2.6 2.8 0.0399 16 35 17.0 50.0 1.15 1730 62.0 70.0 72.0 0.49 0.62 0.72 0.896
56 2.23 K 5.4 2.1 3.0 0.1065 22 48 24.7 50.0 1.15 1160 64.0 70.0 72.0 0.44 0.56 0.65 0.992
W56 2.29 H 4.4 2.0 2.4 0.0558 17 37 20.7 48.0 1.15 1130 59.5 66.0 68.0 0.47 0.59 0.69 0.990
48 2.29 H 4.4 2.0 2.4 0.0558 17 37 20.7 48.0 1.15 1130 59.5 66.0 68.0 0.47 0.59 0.69 0.990
56 1.12 K 7.0 2.5 2.9 0.0517 23 51 20.3 68.0 1.15 3475 62.0 68.0 72.0 0.70 0.79 0.85 1.13
Electrical Data
W56 1.14 K 6.9 3.0 3.0 0.0169 14 31 15.2 65.0 1.15 3400 66.0 70.0 72.0 0.64 0.76 0.83 1.16
48 1.14 K 6.9 3.0 3.0 0.0169 14 31 15.2 65.0 1.15 3400 66.0 70.0 72.0 0.64 0.76 0.83 1.16
56 2.21 K 6.9 2.4 3.0 0.0648 17 37 22.5 52.0 1.15 1755 72.0 77.0 78.5 0.48 0.61 0.72 1.22
0.75 0.55
W56 2.25 K 6.5 2.7 2.9 0.0479 12 26 18.7 50.0 1.15 1730 68.0 74.0 75.5 0.52 0.65 0.75 1.22
48 2.25 K 6.5 2.7 2.9 0.0479 12 26 18.7 50.0 1.15 1730 68.0 74.0 75.5 0.52 0.65 0.75 1.22
56H 3.36 K 5.8 2.3 3.0 0.1331 21 46 29.5 50.0 1.15 1155 70.0 74.0 75.5 0.46 0.59 0.68 1.34
56 3.36 K 5.8 2.3 3.0 0.1331 21 46 29.5 50.0 1.15 1155 70.0 74.0 75.5 0.46 0.59 0.68 1.34
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-23
Electrical Data
Fractional - Three Phase - ODP - Premium Efficiency
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
W56 0.370 K 5.8 2.5 3.0 0.0126 29 64 12.6 62.0 1.35 3460 55.0 64.0 66.0 0.53 0.65 0.74 0.463
48 0.370 K 5.8 2.5 3.0 0.0126 29 64 12.6 62.0 1.35 3460 55.0 64.0 66.0 0.53 0.65 0.74 0.463
56 0.730 M 5.9 2.3 3.3 0.0389 38 84 15.7 52.0 1.35 1765 57.5 64.0 69.5 0.41 0.52 0.61 0.533
0.25 0.18
W56 0.740 K 5.7 2.5 3.4 0.0280 34 75 13.7 50.0 1.35 1740 59.5 68.0 70.0 0.46 0.58 0.67 0.482
48 0.740 K 5.7 2.5 3.4 0.0280 34 75 13.7 50.0 1.35 1740 59.5 68.0 70.0 0.46 0.58 0.67 0.482
56 1.12 K 4.8 2.1 2.8 0.0622 40 88 17.0 50.0 1.35 1160 55.0 64.0 67.5 0.41 0.52 0.61 0.549
W56 0.500 K 5.9 2.7 3.0 0.0126 25 55 12.8 62.0 1.35 3450 59.5 68.0 70.0 0.53 0.66 0.75 0.598
48 0.500 K 5.9 2.7 3.0 0.0126 25 55 12.8 62.0 1.35 3450 59.5 68.0 70.0 0.53 0.66 0.75 0.598
0.33 0.25 W56 0.980 L 6.4 2.7 3.6 0.0358 26 57 14.8 50.0 1.35 1740 64.0 72.0 74.0 0.47 0.59 0.69 0.615
48 0.980 L 6.4 2.7 3.6 0.0358 26 57 14.8 50.0 1.35 1740 64.0 72.0 74.0 0.47 0.59 0.69 0.615
56 1.47 K 5.0 2.1 2.8 0.0710 35 77 18.3 50.0 1.35 1160 59.5 66.0 71.4 0.42 0.53 0.63 0.698
W56 0.750 K 6.5 3.2 3.5 0.0126 27 59 13.0 62.0 1.25 3440 68.0 74.0 74.0 0.54 0.67 0.76 0.826
48 0.750 K 6.5 3.2 3.5 0.0126 27 59 13.0 62.0 1.25 3440 68.0 74.0 74.0 0.54 0.67 0.76 0.826
0.5 0.37 W56 1.49 K 6.4 2.5 3.2 0.0439 23 51 17.6 50.0 1.25 1735 70.0 75.5 78.5 0.53 0.66 0.75 0.789
48 1.49 K 6.4 2.5 3.2 0.0439 23 51 17.6 50.0 1.25 1735 70.0 75.5 78.5 0.53 0.66 0.75 0.789
56 2.24 J 5.1 2.0 2.6 0.0888 28 62 21.2 50.0 1.25 1155 68.0 74.0 75.3 0.43 0.56 0.66 0.934
W56 1.13 J 6.9 3.0 3.3 0.0169 15 33 15.0 62.0 1.25 3430 72.0 75.5 77.0 0.60 0.73 0.82 1.09
48 1.13 J 6.9 3.0 3.3 0.0169 15 33 15.0 62.0 1.25 3430 72.0 75.5 77.0 0.60 0.73 0.82 1.09
0.75 0.55
56 2.21 K 7.3 2.5 3.0 0.0712 21 46 23.4 52.0 1.25 1760 74.0 78.5 81.1 0.52 0.65 0.74 1.15
56H 3.35 J 5.9 2.2 2.8 0.1685 33 73 34.4 50.0 1.15 1160 75.5 80.0 81.7 0.45 0.58 0.67 1.26
W56 1.51 K 7.0 3.1 3.3 0.0190 13 29 16.1 62.0 1.25 3420 74.0 75.5 77.0 0.61 0.74 0.83 1.47
48 1.51 K 7.0 3.1 3.3 0.0190 13 29 16.1 62.0 1.25 3420 74.0 75.5 77.0 0.61 0.74 0.83 1.47
1 0.75
56 2.94 L 7.6 2.8 3.2 0.0842 17 37 26.2 52.0 1.15 1760 78.5 82.5 83.5 0.49 0.63 0.72 1.57
56H 4.47 K 6.2 2.4 3.0 0.1951 26 57 38.8 50.0 1.15 1160 77.0 81.5 82.5 0.45 0.58 0.68 1.68
W56 2.27 K 8.0 3.3 3.6 0.0294 12 26 20.9 62.0 1.15 3420 82.5 84.0 84.0 0.65 0.78 0.85 1.93
1.5 1.1 48 2.27 K 8.0 3.3 3.6 0.0294 12 26 20.9 62.0 1.15 3420 82.5 84.0 84.0 0.65 0.78 0.85 1.93
56H 4.42 L 8.8 2.9 3.5 0.1296 14 31 36.8 52.0 1.15 1760 84.0 85.5 86.5 0.53 0.66 0.76 2.10
56H 2.95 K 8.9 2.2 3.3 0.1151 14 31 37.0 62.0 1.15 3510 84.0 85.5 85.5 0.77 0.86 0.91 2.42
2 1.5
56H 5.96 K 7.7 2.6 3.2 0.1168 17 37 35.5 52.0 1.15 1740 85.5 86.5 86.5 0.61 0.74 0.81 2.69
56H 4.47 J 8.0 2.3 3.0 0.1279 9 20 43.7 62.0 1.15 3480 84.0 85.5 85.5 0.76 0.86 0.90 3.59
3 2.2
56H 8.96 K 7.6 2.7 3.0 0.1419 12 26 43.0 52.0 1.15 1735 86.5 86.5 86.9 0.59 0.72 0.80 3.97
Electrical Data
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
W56 0.480 L 5.1 2.4 2.9 0.0240 43 95 13.5 50.0 1.15 1735 50.5 59.5 62.0 0.48 0.58 0.67 0.363
48 0.480 L 5.1 2.4 2.9 0.0240 43 95 13.5 50.0 1.15 1735 50.5 59.5 62.0 0.48 0.58 0.67 0.363
0.16 0.12
W56 0.730 J 3.9 1.9 2.5 0.0280 43 95 14.3 48.0 1.15 1135 46.0 55.0 59.5 0.45 0.56 0.65 0.389
48 0.730 J 3.9 1.9 2.5 0.0280 43 95 14.3 48.0 1.15 1135 46.0 55.0 59.5 0.45 0.56 0.65 0.389
56 0.370 L 6.4 2.5 3.0 0.0389 60 132 17.2 68.0 1.15 3475 46.0 52.5 57.5 0.75 0.82 0.86 0.457
W56 0.380 L 6.0 2.8 3.0 0.0126 34 75 13.5 65.0 1.15 3430 48.0 57.5 59.5 0.62 0.71 0.78 0.487
48 0.380 L 6.0 2.8 3.0 0.0126 34 75 13.5 65.0 1.15 3430 48.0 57.5 59.5 0.62 0.71 0.78 0.487
56 0.730 M 6.3 2.4 3.0 0.0453 38 84 18.1 52.0 1.15 1765 57.5 66.0 70.0 0.43 0.54 0.62 0.521
0.25 0.18 W56 0.750 K 5.3 2.4 2.9 0.0280 30 66 14.3 50.0 1.15 1735 55.0 62.0 66.0 0.48 0.59 0.68 0.503
48 0.750 K 5.3 2.4 2.9 0.0280 30 66 14.3 50.0 1.15 1735 55.0 62.0 66.0 0.48 0.59 0.68 0.503
56 1.12 K 5.1 2.3 3.0 0.0710 46 101 19.0 50.0 1.15 1160 55.0 64.0 68.0 0.41 0.52 0.61 0.545
W56 1.14 J 4.2 2.0 2.5 0.0358 26 57 16.1 48.0 1.15 1135 50.5 59.5 62.0 0.45 0.56 0.65 0.561
48 1.14 J 4.2 2.0 2.5 0.0358 26 57 16.1 48.0 1.15 1135 50.5 59.5 62.0 0.45 0.56 0.65 0.561
56 0.490 L 6.4 2.5 3.0 0.0389 40 88 17.2 68.0 1.15 3485 48.0 57.5 62.0 0.72 0.79 0.84 0.602
W56 0.500 L 6.1 2.9 3.0 0.0126 28 62 13.5 65.0 1.15 3425 52.5 59.5 62.0 0.60 0.70 0.77 0.657
48 0.500 L 6.1 2.9 3.0 0.0126 28 62 13.5 65.0 1.15 3425 52.5 59.5 62.0 0.60 0.70 0.77 0.657
56 0.970 M 7.1 2.3 3.0 0.0517 31 68 19.4 52.0 1.15 1765 64.0 72.0 74.0 0.47 0.58 0.68 0.624
0.33 0.25 W56 0.990 K 5.4 2.3 2.7 0.0318 21 46 15.2 50.0 1.15 1730 57.5 64.0 68.0 0.48 0.60 0.70 0.659
48 0.990 K 5.4 2.3 2.7 0.0318 21 46 15.2 50.0 1.15 1730 57.5 64.0 68.0 0.48 0.60 0.70 0.659
56 1.47 L 5.5 2.4 3.0 0.0888 36 79 21.8 50.0 1.15 1160 59.5 68.0 70.0 0.42 0.53 0.62 0.723
W56 1.51 H 4.1 1.8 2.3 0.0439 22 48 17.9 48.0 1.15 1130 55.0 62.0 64.0 0.48 0.59 0.69 0.711
48 1.51 H 4.1 1.8 2.3 0.0439 22 48 17.9 48.0 1.15 1130 55.0 62.0 64.0 0.48 0.59 0.69 0.711
56 0.740 L 7.0 2.6 3.0 0.0453 35 77 19.0 68.0 1.15 3500 55.0 62.0 68.0 0.67 0.75 0.81 0.843
W56 0.760 K 6.3 2.9 2.9 0.0147 20 44 14.3 65.0 1.15 3400 59.5 66.0 68.0 0.61 0.73 0.80 0.854
48 0.760 K 6.3 2.9 2.9 0.0147 20 44 14.3 65.0 1.15 3400 59.5 66.0 68.0 0.61 0.73 0.80 0.854
56 1.47 L 7.0 2.4 3.0 0.0584 20 44 20.9 52.0 1.15 1760 68.0 74.0 77.0 0.48 0.61 0.70 0.862
0.5 0.37 W56 1.50 K 6.0 2.6 2.8 0.0399 16 35 17.0 50.0 1.15 1730 62.0 70.0 72.0 0.49 0.62 0.72 0.896
48 1.50 K 6.0 2.6 2.8 0.0399 16 35 17.0 50.0 1.15 1730 62.0 70.0 72.0 0.49 0.62 0.72 0.896
56 2.23 K 5.4 2.1 3.0 0.1065 22 48 24.7 50.0 1.15 1160 64.0 70.0 72.0 0.44 0.56 0.65 0.992
W56 2.29 H 4.4 2.0 2.4 0.0558 17 37 20.7 48.0 1.15 1130 59.5 66.0 68.0 0.47 0.59 0.69 0.990
48 2.29 H 4.4 2.0 2.4 0.0558 17 37 20.7 48.0 1.15 1130 59.5 66.0 68.0 0.47 0.59 0.69 0.990
56 1.12 K 7.0 2.5 2.9 0.0517 23 51 20.3 68.0 1.15 3475 62.0 68.0 72.0 0.70 0.79 0.85 1.13
W56 1.14 K 6.9 3.0 3.0 0.0169 14 31 15.2 65.0 1.15 3400 66.0 70.0 72.0 0.64 0.76 0.83 1.16
Electrical Data
48 1.14 K 6.9 3.0 3.0 0.0169 14 31 15.2 65.0 1.15 3400 66.0 70.0 72.0 0.64 0.76 0.83 1.16
56 2.21 K 6.9 2.4 3.0 0.0648 17 37 22.5 52.0 1.15 1755 72.0 77.0 78.5 0.48 0.61 0.72 1.22
0.75 0.55
W56 2.25 K 6.5 2.7 2.9 0.0479 12 26 18.7 50.0 1.15 1730 68.0 74.0 75.5 0.52 0.65 0.75 1.22
48 2.25 K 6.5 2.7 2.9 0.0479 12 26 18.7 50.0 1.15 1730 68.0 74.0 75.5 0.52 0.65 0.75 1.22
56H 3.36 K 5.8 2.3 3.0 0.1331 21 46 29.5 50.0 1.15 1155 70.0 74.0 75.5 0.46 0.59 0.68 1.34
56 3.36 K 5.8 2.3 3.0 0.1331 21 46 29.5 50.0 1.15 1155 70.0 74.0 75.5 0.46 0.59 0.68 1.34
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-25
Electrical Data
Fractional - Three Phase - ODP - Standard Efficiency - continued
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
56 1.49 K 7.2 2.4 2.9 0.0643 24 53 23.4 68.0 1.15 3480 66.0 72.0 74.0 0.68 0.79 0.84 1.51
W56 1.52 L 7.7 3.3 3.2 0.0211 11 24 17.0 65.0 1.15 3405 70.0 74.0 74.0 0.66 0.77 0.84 1.51
48 1.52 L 7.7 3.3 3.2 0.0211 11 24 17.0 65.0 1.15 3405 70.0 74.0 74.0 0.66 0.77 0.84 1.51
56 2.94 M 7.7 2.7 3.0 0.0842 12 26 26.9 52.0 1.15 1760 74.0 78.5 80.0 0.48 0.62 0.71 1.66
1 0.75
W56 3.00 K 6.9 2.9 2.9 0.0598 9 20 21.6 50.0 1.15 1725 70.0 75.5 77.0 0.53 0.66 0.76 1.61
48 3.00 K 6.9 2.9 2.9 0.0598 9 20 21.6 50.0 1.15 1725 70.0 75.5 77.0 0.53 0.66 0.76 1.61
56H 4.52 J 5.6 2.1 2.6 0.1597 15 33 33.7 50.0 1.15 1145 72.0 75.5 77.0 0.50 0.63 0.73 1.67
56 4.52 J 5.6 2.1 2.6 0.1597 15 33 33.7 50.0 1.15 1145 72.0 75.5 77.0 0.50 0.63 0.73 1.67
56 2.25 J 7.2 2.4 2.7 0.0771 12 26 26.0 68.0 1.15 3460 72.0 75.5 77.0 0.76 0.85 0.90 1.99
W56 2.26 L 8.5 3.8 3.7 0.0294 9 20 20.7 65.0 1.15 3435 74.0 77.0 77.0 0.64 0.77 0.84 2.13
1.5 1.1 48 2.26 L 8.5 3.8 3.7 0.0294 9 20 20.7 65.0 1.15 3435 74.0 77.0 77.0 0.64 0.77 0.84 2.13
56H 4.44 K 7.5 2.5 3.0 0.1037 9 20 31.3 52.0 1.15 1750 77.0 80.0 81.5 0.54 0.67 0.76 2.23
56 4.44 K 7.5 2.5 3.0 0.1037 9 20 31.3 52.0 1.15 1750 77.0 80.0 81.5 0.54 0.67 0.76 2.23
56H 2.98 K 7.7 2.3 2.9 0.0963 11 24 30.9 68.0 1.15 3475 75.5 78.5 80.0 0.76 0.86 0.90 2.62
56 2.98 K 7.7 2.3 2.9 0.0963 11 24 30.9 68.0 1.15 3475 75.5 78.5 80.0 0.76 0.86 0.90 2.62
2 1.5
56H 5.94 K 7.3 2.4 2.7 0.1232 8 18 35.9 52.0 1.15 1745 80.0 81.5 82.5 0.58 0.72 0.80 2.85
56 5.94 K 7.3 2.4 2.7 0.1232 8 18 35.9 52.0 1.15 1745 80.0 81.5 82.5 0.58 0.72 0.80 2.85
56H 4.47 K 8.5 2.7 2.8 0.1279 6 13 38.1 68.0 1.15 3480 80.0 81.5 81.5 0.76 0.86 0.90 3.76
3 2.2
56 4.47 K 8.5 2.7 2.8 0.1279 6 13 38.1 68.0 1.15 3480 80.0 81.5 81.5 0.76 0.86 0.90 3.76
Electrical Data
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
143/5T 1.49 L 8.2 2.8 3.4 0.0332 22 48 36.4 68.0 1.25 3480 75.0 79.0 81.5 0.63 0.74 0.80 1.44
143T 1.49 L 8.2 2.8 3.4 0.0332 22 48 36.4 68.0 1.25 3480 75.0 79.0 81.5 0.63 0.74 0.80 1.44
143/5T 2.94 L 8.4 3.2 3.5 0.1172 18 40 40.8 51.0 1.25 1760 80.0 84.0 85.5 0.55 0.68 0.75 1.47
1 0.75 143T 2.94 L 8.4 3.2 3.5 0.1172 18 40 40.8 51.0 1.25 1760 80.0 84.0 85.5 0.55 0.68 0.75 1.47
143/5T 4.51 K 6.2 3.0 3.0 0.1595 28 62 52.9 49.0 1.25 1150 77.0 82.0 82.5 0.45 0.57 0.66 1.73
182/4T 5.92 M 6.0 3.0 3.5 0.3991 22 48 94.8 50.0 1.25 875 74.0 77.0 78.5 0.32 0.42 0.52 2.30
182T 5.92 M 6.0 3.0 3.5 0.3991 22 48 94.8 50.0 1.25 875 74.0 77.0 78.5 0.32 0.42 0.52 2.30
143/5T 2.23 L 8.9 3.5 3.8 0.0470 21 46 40.8 68.0 1.25 3490 81.5 84.0 84.0 0.70 0.80 0.84 1.96
143T 2.23 L 8.9 3.5 3.8 0.0470 21 46 40.8 68.0 1.25 3490 81.5 84.0 84.0 0.70 0.80 0.84 1.96
143/5T 4.43 L 8.4 2.5 3.4 0.1431 14 31 48.5 51.0 1.25 1755 82.5 85.5 86.5 0.60 0.70 0.79 2.02
1.5 1.1
182/4T 6.64 M 7.8 3.2 4.0 0.4879 16 35 70.3 52.0 1.25 1170 84.0 86.5 87.5 0.45 0.54 0.62 2.54
182T 6.64 M 7.8 3.2 4.0 0.4879 16 35 70.3 52.0 1.25 1170 84.0 86.5 87.5 0.45 0.54 0.62 2.54
182/4T 9.04 J 5.5 2.5 2.6 0.5766 17 37 111 50.0 1.25 860 80.0 82.5 82.5 0.43 0.54 0.62 2.70
182T 2.94 L 9.5 2.9 4.8 0.1718 47 103 86.0 69.0 1.25 3530 78.5 84.0 85.5 0.68 0.79 0.84 2.62
143/5T 2.98 L 8.9 3.5 3.8 0.0605 17 37 51.8 68.0 1.25 3475 82.5 85.5 85.5 0.71 0.80 0.86 2.56
143/5T 5.92 K 8.0 2.7 3.2 0.1561 11 24 50.7 51.0 1.25 1750 85.5 86.5 86.5 0.57 0.70 0.79 2.76
2 1.5
182/4T 8.89 L 7.5 3.0 3.0 0.6210 31 68 87.5 52.0 1.25 1165 86.5 88.5 88.5 0.46 0.58 0.66 3.23
213/5T 11.8 M 7.6 2.4 2.9 1.79 39 86 149 52.0 1.25 875 82.5 84.0 85.5 0.45 0.55 0.65 3.39
213T 11.8 M 7.6 2.4 2.9 1.79 39 86 149 52.0 1.25 875 82.5 84.0 85.5 0.45 0.55 0.65 3.39
182/4T 4.42 K 8.6 2.5 3.8 0.1889 41 90 88.2 69.0 1.25 3515 82.5 86.5 86.5 0.75 0.84 0.88 3.63
182T 4.42 K 8.6 2.5 3.8 0.1889 41 90 88.2 69.0 1.25 3515 82.5 86.5 86.5 0.75 0.84 0.88 3.63
145T 4.49 J 8.1 3.3 3.6 0.0605 14 31 51.8 68.0 1.25 3460 85.5 86.5 86.5 0.70 0.81 0.86 3.71
182T 8.83 K 8.1 2.3 3.4 0.3401 23 51 90.4 56.0 1.25 1760 87.5 88.5 89.5 0.61 0.73 0.79 3.91
3 2.2
182/4T 8.83 K 8.1 2.3 3.4 0.3401 23 51 90.4 56.0 1.25 1760 87.5 88.5 89.5 0.61 0.73 0.79 3.91
213/5T 13.2 K 7.0 2.0 2.8 1.20 58 128 121 55.0 1.25 1175 86.5 88.5 89.5 0.50 0.63 0.70 4.41
213T 13.3 K 7.0 2.0 2.8 1.20 58 128 121 55.0 1.25 1170 86.5 88.5 89.5 0.50 0.63 0.70 4.41
213/5T 17.9 K 6.8 2.3 2.8 2.11 44 97 176 52.0 1.25 870 84.0 85.5 85.5 0.50 0.63 0.71 4.55
182/4T 7.40 J 7.6 2.3 3.5 0.2233 25 55 88.2 69.0 1.25 3500 86.5 88.5 88.5 0.76 0.85 0.89 5.90
182/4T 14.8 J 7.5 2.3 3.2 0.4003 15 33 94.8 56.0 1.25 1755 88.5 89.5 89.5 0.62 0.74 0.80 6.45
5 3.7 213/5T 22.1 J 6.8 1.7 2.6 1.47 57 125 162 55.0 1.25 1170 88.5 89.5 89.5 0.58 0.70 0.76 6.83
254/6T 29.4 H 5.3 1.9 2.5 3.41 44 97 258 54.0 1.25 880 85.5 87.5 87.5 0.49 0.62 0.70 7.58
254T 29.4 H 5.3 1.9 2.5 3.41 44 97 258 54.0 1.25 880 85.5 87.5 87.5 0.49 0.62 0.70 7.58
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-27
Electrical Data
Cooling Tower Motors - Three Phase - continued
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
213/5T 11.0 H 7.2 2.1 3.0 0.4665 27 59 139 72.0 1.25 3520 87.5 89.5 89.5 0.75 0.84 0.88 8.76
213T 11.0 H 7.2 2.1 3.0 0.4665 27 59 139 72.0 1.25 3520 87.5 89.5 89.5 0.75 0.84 0.88 8.76
182/4T 11.1 J 8.2 2.7 3.3 0.2242 17 37 92.6 69.0 1.25 3485 88.5 89.5 89.5 0.75 0.84 0.88 8.76
213/5T 22.0 H 7.1 2.2 3.1 1.34 20 44 154 58.0 1.25 1765 89.5 91.0 91.7 0.66 0.76 0.82 9.18
213T 22.0 H 7.1 2.2 3.1 1.34 20 44 154 58.0 1.25 1765 89.5 91.0 91.7 0.66 0.76 0.82 9.18
7.5 5.5
215T 22.0 H 7.1 2.2 3.1 1.34 20 44 154 58.0 1.25 1765 89.5 91.0 91.7 0.66 0.76 0.82 9.18
254/6T 33.1 H 6.8 2.5 3.0 3.92 30 66 262 59.0 1.25 1175 89.5 90.2 91.0 0.63 0.74 0.80 9.48
254T 33.1 H 6.8 2.5 3.0 3.92 30 66 262 59.0 1.25 1175 89.5 90.2 91.0 0.63 0.74 0.80 9.48
254/6T 44.2 G 5.3 2.0 2.5 4.43 33 73 284 54.0 1.25 880 85.5 87.5 87.5 0.50 0.63 0.71 11.1
284T 44.2 G 5.6 2.0 2.4 7.20 34 75 344 54.0 1.25 880 87.5 88.5 88.5 0.60 0.72 0.78 10.0
213/5T 14.7 H 7.2 2.2 2.9 0.6362 24 53 163 72.0 1.25 3520 89.5 90.2 90.2 0.79 0.87 0.90 11.6
213/5T 29.4 H 6.4 2.0 3.0 1.51 17 37 172 58.0 1.25 1765 91.0 91.7 91.7 0.66 0.77 0.83 12.4
254/6T 44.1 H 6.5 2.3 2.8 4.43 26 57 289 59.0 1.25 1175 90.2 91.0 91.0 0.63 0.74 0.78 13.3
10 7.5 254T 44.1 H 6.5 2.3 2.8 4.43 26 57 289 59.0 1.25 1175 90.2 91.0 91.0 0.63 0.74 0.78 13.3
256T 44.1 H 6.5 2.3 2.8 4.43 26 57 289 59.0 1.25 1175 90.2 91.0 91.0 0.63 0.74 0.78 13.3
284/6T 58.9 G 5.6 2.0 2.4 7.20 32 70 373 54.0 1.25 880 89.5 90.2 90.2 0.61 0.72 0.78 13.4
284T 58.9 G 5.6 2.0 2.4 7.20 32 70 373 54.0 1.25 880 89.5 90.2 90.2 0.61 0.72 0.78 13.4
254/6T 22.0 G 6.7 2.2 2.7 1.26 25 55 236 72.0 1.25 3530 89.5 91.0 91.0 0.77 0.85 0.88 17.2
254T 22.0 G 6.7 2.2 2.7 1.26 25 55 236 72.0 1.25 3530 89.5 91.0 91.0 0.77 0.85 0.88 17.2
213/5T 22.1 H 7.6 2.4 2.8 0.6362 14 31 163 72.0 1.25 3510 90.2 91.0 91.0 0.76 0.85 0.89 17.0
254/6T 44.0 G 6.4 2.3 2.7 2.62 17 37 251 64.0 1.25 1765 91.0 91.7 92.4 0.68 0.78 0.83 18.0
15 11 254T 44.0 G 6.4 2.3 2.7 2.62 17 37 251 64.0 1.25 1765 91.0 91.7 92.4 0.68 0.78 0.83 18.0
256T 44.0 G 6.4 2.3 2.7 2.62 17 37 251 64.0 1.25 1765 91.0 91.7 92.4 0.68 0.78 0.83 18.0
284T 66.1 G 6.4 2.3 2.7 7.85 20 44 379 59.0 1.25 1175 91.0 91.7 91.7 0.69 0.80 0.84 17.9
284/6T 66.1 G 6.4 2.3 2.7 7.85 20 44 379 59.0 1.25 1175 91.0 91.7 91.7 0.69 0.80 0.84 17.9
284/6T 88.3 G 5.5 2.0 2.3 8.18 25 55 417 54.0 1.25 880 85.5 90.0 90.2 0.62 0.72 0.78 19.6
254/6T 29.4 G 6.1 2.0 2.4 1.54 21 46 269 72.0 1.25 3520 91.0 91.7 91.0 0.82 0.87 0.89 23.2
256T 29.4 G 6.1 2.0 2.4 1.54 21 46 269 72.0 1.25 3520 91.0 91.7 91.0 0.82 0.87 0.89 23.2
254/6T 58.7 H 6.9 2.3 2.7 3.10 15 33 291 64.0 1.25 1765 91.7 92.4 93.0 0.68 0.79 0.84 24.1
20 15 284T 58.7 G 6.0 2.3 2.6 5.11 27 59 370 64.0 1.25 1765 92.4 93.0 93.0 0.70 0.80 0.84 24.1
284/6T 88.2 G 6.2 2.3 2.6 9.16 16 35 426 59.0 1.25 1175 91.0 91.7 91.7 0.70 0.80 0.85 24.2
324/6T 118 G 5.0 1.9 2.2 9.37 27 59 452 56.0 1.25 880 89.5 91.0 91.0 0.54 0.66 0.73 28.3
324T 118 G 5.0 1.9 2.2 9.37 27 59 452 56.0 1.25 880 89.5 91.0 91.0 0.54 0.66 0.73 28.3
Electrical Data
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
284/6TS 36.6 G 6.3 2.0 2.5 2.69 17 37 362 72.0 1.25 3535 91.0 91.7 91.7 0.82 0.87 0.89 28.5
284TS 36.6 G 6.3 2.0 2.5 2.69 17 37 362 72.0 1.25 3535 91.0 91.7 91.7 0.82 0.87 0.89 28.5
284T 73.4 G 6.2 2.4 2.7 5.11 24 53 388 64.0 1.25 1765 92.4 93.0 93.6 0.70 0.80 0.84 29.5
284/6T 73.4 G 6.2 2.4 2.7 5.11 24 53 388 64.0 1.25 1765 92.4 93.0 93.6 0.70 0.80 0.84 29.5
25 18.5 324/6T 110 G 6.2 2.1 2.6 11.5 26 57 560 62.0 1.25 1180 91.7 93.0 93.0 0.65 0.77 0.82 30.4
324T 110 G 6.2 2.1 2.6 11.5 26 57 560 62.0 1.25 1180 91.7 93.0 93.0 0.65 0.77 0.82 30.4
326T 110 G 6.2 2.1 2.6 11.5 26 57 560 62.0 1.25 1180 91.7 93.0 93.0 0.65 0.77 0.82 30.4
324/6T 147 G 5.2 2.0 2.3 11.9 23 51 509 56.0 1.25 880 89.5 91.0 91.0 0.51 0.64 0.71 35.9
326T 147 G 5.2 2.0 2.3 11.9 23 51 509 56.0 1.25 880 89.5 91.0 91.0 0.51 0.64 0.71 35.9
284/6TS 44.0 G 6.3 2.0 2.5 3.37 15 33 392 72.0 1.25 3535 91.7 91.7 91.7 0.82 0.87 0.89 33.8
324T 87.6 G 6.2 2.1 2.4 8.18 26 57 463 66.0 1.25 1775 92.4 93.6 93.6 0.72 0.81 0.84 35.1
284/6T 88.1 G 6.1 2.4 2.4 5.85 20 44 437 64.0 1.25 1765 93.0 93.0 93.6 0.70 0.80 0.84 35.1
30 22 324/6T 132 G 6.2 2.3 2.6 13.2 21 46 628 62.0 1.25 1180 91.7 93.0 93.0 0.65 0.76 0.82 36.2
326T 132 G 6.2 2.3 2.6 13.2 21 46 628 62.0 1.25 1180 91.7 93.0 93.0 0.65 0.76 0.82 36.2
364/5T 132 G 6.2 1.9 2.4 13.2 27 59 781 66.0 1.25 1180 93.0 93.6 93.0 0.72 0.81 0.85 34.9
364/5T 177 G 6.2 1.7 2.4 23.5 20 44 803 60.0 1.25 880 92.4 92.4 92.4 0.63 0.74 0.80 37.0
324/6TS 58.3 G 6.3 2.3 2.4 4.90 22 48 547 78.0 1.25 3555 91.7 92.4 92.4 0.82 0.87 0.89 45.8
324TS 58.3 G 6.3 2.3 2.4 4.90 22 48 547 78.0 1.25 3555 91.7 92.4 92.4 0.82 0.87 0.89 45.8
324/6T 117 G 6.1 2.2 2.4 9.16 20 44 492 66.0 1.25 1775 93.6 94.1 94.1 0.72 0.80 0.85 47.1
40 30 324T 117 G 6.1 2.2 2.4 9.16 20 44 492 66.0 1.25 1775 93.6 94.1 94.1 0.72 0.80 0.85 47.1
326T 117 G 6.1 2.2 2.4 9.16 20 44 492 66.0 1.25 1775 93.6 94.1 94.1 0.72 0.80 0.85 47.1
364/5T 175 G 6.4 2.0 2.4 29.0 21 46 833 66.0 1.25 1185 93.6 93.6 94.1 0.73 0.82 0.86 46.5
364/5T 235 H 6.7 1.7 2.3 29.0 18 40 875 60.0 1.25 880 92.4 93.0 92.4 0.66 0.76 0.81 50.3
324/6TS 73.0 F 6.2 2.2 2.3 5.75 23 51 584 78.0 1.25 3550 93.0 93.0 93.0 0.83 0.87 0.89 56.1
326TS 73.0 F 6.2 2.2 2.3 5.75 23 51 584 78.0 1.25 3550 93.0 93.0 93.0 0.83 0.87 0.89 56.1
324/6T 146 G 6.2 2.3 2.7 9.16 15 33 536 66.0 1.25 1775 93.0 94.1 94.5 0.66 0.77 0.83 59.2
50 37
364/5T 220 G 6.4 2.0 2.4 32.4 18 40 869 66.0 1.25 1180 93.6 94.1 94.1 0.74 0.83 0.86 57.4
404/5T 220 G 6.3 2.0 2.4 32.4 20 44 975 68.0 1.25 1180 93.6 94.1 94.1 0.73 0.82 0.85 58.1
404/5T 294 H 6.8 1.7 2.6 34.6 15 33 1012 60.0 1.25 880 93.0 93.0 93.0 0.68 0.78 0.83 60.0
364/5TS 87.3 G 6.6 2.0 2.6 10.6 14 31 825 79.0 1.25 3560 91.7 93.0 93.6 0.81 0.88 0.90 67.0
404/5TS 87.4 G 6.5 2.0 2.5 10.6 22 48 911 79.0 1.25 3555 91.7 93.0 93.6 0.82 0.88 0.90 67.0
60 45 364/5T 175 G 6.6 2.4 2.6 22.4 15 33 869 67.0 1.25 1775 94.1 94.5 95.0 0.75 0.83 0.87 68.3
Electrical Data
404/5T 262 H 7.1 2.0 2.3 36.9 20 44 1036 68.0 1.25 1185 94.1 94.5 94.5 0.74 0.82 0.86 69.5
404/5T 353 H 6.5 1.8 2.7 40.2 13 29 1111 60.0 1.25 880 93.0 93.0 93.0 0.68 0.78 0.83 73.0
364/5TS 109 G 6.7 2.0 2.6 11.9 10 22 847 79.0 1.25 3555 92.4 93.6 93.6 0.83 0.88 0.90 81.9
364/5T 219 G 6.4 2.4 2.6 23.3 14 31 919 67.0 1.25 1775 94.5 95.0 95.4 0.73 0.82 0.86 84.1
75 55
404/5T 329 G 6.4 2.0 2.3 40.2 17 37 1089 68.0 1.25 1180 94.1 94.5 94.5 0.74 0.83 0.86 84.9
444/5T 437 G 6.0 1.8 2.1 73.6 18 40 1444 63.0 1.25 890 93.0 93.6 93.6 0.64 0.74 0.79 93.0
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-29
Electrical Data
Cooling Tower Motors - Three Phase - continued
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
404/5TS 146 G 6.5 2.0 2.4 13.2 14 31 1045 79.0 1.25 3545 93.0 94.1 94.1 0.85 0.90 0.91 110
404/5T 292 H 7.3 2.4 2.6 29.9 13 29 1140 68.0 1.25 1775 95.0 95.0 95.4 0.77 0.84 0.88 111
100 75
444/5T 437 G 6.2 2.2 2.6 87.3 20 44 1577 69.0 1.25 1185 94.5 95.0 95.0 0.68 0.78 0.82 121
444/5T 582 G 6.0 1.9 2.2 87.3 15 33 1599 63.0 1.25 890 93.6 94.1 94.1 0.63 0.74 0.79 127
Electrical Data
Electrical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-31
Electrical Data
Close-Coupled Pump - JM - Three Phase - TEFC - Rolled Steel
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
143/5JM 1.48 K 7.8 2.0 3.0 0.0643 22 48 26.2 68.0 1.15 3510 72.0 77.0 78.5 0.65 0.76 0.83 1.44
1 0.75 143/5JM 2.94 M 8.6 2.8 3.0 0.1232 19 42 37.9 52.0 1.15 1765 82.5 84.0 85.5 0.52 0.66 0.75 1.47
143/5JM 4.52 J 5.8 2.3 2.8 0.1597 31 68 38.6 49.0 1.15 1145 80.0 82.5 82.5 0.50 0.63 0.72 1.58
143/5JM 2.21 L 9.1 2.3 3.0 0.1023 17 37 34.2 68.0 1.15 3520 80.0 82.5 84.0 0.71 0.82 0.88 1.87
1.5 1.1 143/5JM 4.44 K 8.2 2.7 3.0 0.1101 21 46 37.9 52.0 1.15 1750 85.5 86.5 86.5 0.59 0.72 0.79 2.02
182/4JM 6.64 K 6.9 2.4 3.4 0.2800 55 121 65.9 52.0 1.15 1170 84.0 86.5 87.5 0.50 0.63 0.71 2.22
143/5JM 2.94 L 9.9 2.5 3.0 0.1279 13 29 40.1 68.0 1.15 3520 82.5 85.5 85.5 0.73 0.83 0.89 2.47
2 1.5 143/5JM 5.94 K 8.2 2.7 3.0 0.1296 15 33 42.3 52.0 1.15 1745 85.5 87.5 86.5 0.60 0.73 0.80 2.72
182/4JM 8.86 K 7.5 2.6 3.7 0.3424 44 97 76.1 52.0 1.15 1170 84.0 86.5 88.5 0.50 0.62 0.71 3.00
182/4JM 4.42 K 8.8 2.2 3.0 0.1564 22 48 63.5 68.0 1.15 3515 84.0 86.5 86.5 0.71 0.82 0.87 3.67
3 2.2 182/4JM 8.81 K 8.8 2.2 3.0 0.4017 18 40 80.3 56.0 1.15 1765 87.5 88.5 89.5 0.61 0.74 0.81 3.81
213/5JM 13.2 H 6.4 2.3 2.9 1.08 46 101 130 55.0 1.15 1175 85.5 88.5 89.5 0.55 0.67 0.74 4.17
182/4JM 7.40 J 7.8 2.2 3.0 0.2079 17 37 78.5 68.0 1.15 3500 87.5 88.5 88.5 0.76 0.85 0.89 5.90
5 3.7 182/4JM 14.8 J 7.0 2.2 3.0 0.3080 16 35 71.4 56.0 1.15 1750 88.5 89.5 89.5 0.60 0.73 0.80 6.49
213/5JM 22.0 H 6.0 2.2 2.5 1.26 30 66 144 55.0 1.15 1175 87.5 88.5 89.5 0.59 0.71 0.77 6.74
213/5JM 11.0 H 7.6 2.6 3.0 0.5496 15 33 133 70.0 1.15 3530 87.5 88.5 89.5 0.76 0.85 0.89 8.67
7.5 5.5 213/5JM 22.0 H 7.3 2.6 3.0 0.9380 22 48 120 60.0 1.15 1770 90.2 91.0 91.7 0.64 0.76 0.82 9.07
254/6JM 33.1 G 5.4 2.0 2.3 2.34 42 92 204 59.0 1.15 1175 89.5 89.5 91.0 0.58 0.70 0.76 9.98
213/5JM 14.7 H 7.5 2.6 3.0 0.7188 12 26 161 70.0 1.15 3530 89.5 90.2 90.2 0.80 0.88 0.91 11.5
10 7.5 213/5JM 29.4 H 7.0 2.5 3.0 1.07 15 33 130 60.0 1.15 1760 91.0 91.0 91.7 0.67 0.78 0.84 12.2
254/6JM 44.1 G 5.4 2.1 2.3 2.83 30 66 234 59.0 1.15 1175 90.2 91.0 91.0 0.57 0.69 0.75 13.8
254/6JM 22.0 G 6.8 2.0 3.0 0.8718 14 31 175 75.0 1.15 3525 89.5 91.0 91.0 0.73 0.83 0.87 17.4
15 11
254/6JM 43.9 G 6.5 2.5 3.0 2.15 19 42 197 68.0 1.15 1770 91.0 92.4 92.4 0.64 0.76 0.82 18.2
254/6JM 29.5 G 6.6 2.0 2.9 1.22 12 26 211 75.0 1.15 3515 90.0 91.0 91.0 0.81 0.88 0.91 22.7
20 15
254/6JM 58.7 H 6.7 2.7 3.0 2.64 16 35 227 68.0 1.15 1765 91.7 92.4 93.0 0.66 0.77 0.82 24.7
25 18.5 254/6JM 36.7 J 8.3 2.4 3.4 1.31 8 18 221 75.0 1.15 3530 91.0 91.7 91.7 0.77 0.85 0.89 28.5
Electrical Data
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
143/5JM 1.49 L 8.2 2.8 3.4 0.0332 22 48 36.4 68.0 1.25 3480 75.0 79.0 81.5 0.63 0.74 0.80 1.44
1 0.75 143/5JM 2.94 L 8.4 3.2 3.5 0.1172 18 40 40.8 51.0 1.25 1760 80.0 84.0 85.5 0.55 0.68 0.75 1.47
143/5JM 4.51 K 6.2 2.6 3.0 0.1595 28 62 52.9 49.0 1.25 1150 77.0 82.0 82.5 0.45 0.57 0.66 1.73
143/5JM 2.23 L 8.9 3.5 3.8 0.0470 21 46 40.8 68.0 1.25 3490 81.5 84.0 84.0 0.70 0.80 0.84 1.96
1.5 1.1 143/5JM 4.43 L 8.4 2.5 3.4 0.1431 14 31 48.5 51.0 1.25 1755 82.5 85.5 86.5 0.60 0.70 0.79 2.02
182/4JM 6.64 M 7.8 3.2 4.0 0.4879 16 35 70.3 52.0 1.25 1170 84.0 86.5 87.5 0.45 0.54 0.62 2.54
143/5JM 2.98 L 8.9 3.5 3.8 0.0605 17 37 51.8 68.0 1.25 3475 82.5 85.5 85.5 0.71 0.80 0.86 2.56
2 1.5 143/5JM 5.92 K 8.0 2.7 3.2 0.1561 11 24 50.7 51.0 1.25 1750 85.5 86.5 86.5 0.57 0.70 0.79 2.76
182/4JM 8.89 L 7.5 3.0 3.0 0.6210 31 68 87.5 52.0 1.25 1165 86.5 88.5 88.5 0.46 0.58 0.66 3.23
182/4JM 4.42 K 8.6 2.5 3.8 0.1889 41 90 88.2 69.0 1.25 3515 82.5 86.5 86.5 0.75 0.84 0.88 3.63
3 2.2 182/4JM 8.83 K 8.1 2.3 3.4 0.3401 23 51 90.4 56.0 1.25 1760 87.5 88.5 89.5 0.61 0.73 0.79 3.91
213/5JM 13.2 K 7.0 2.0 2.8 1.20 58 128 121 55.0 1.25 1175 86.5 88.5 89.5 0.50 0.63 0.70 4.41
182/4JM 7.40 J 7.6 2.3 3.5 0.2233 25 55 88.2 69.0 1.25 3500 86.5 88.5 88.5 0.76 0.85 0.89 5.90
5 3.7 182/4JM 14.8 J 7.5 2.3 3.2 0.4003 15 33 94.8 56.0 1.25 1755 88.5 89.5 89.5 0.62 0.74 0.80 6.45
213/5JM 22.1 J 6.8 1.7 2.6 1.47 57 125 162 55.0 1.25 1170 88.5 89.5 89.5 0.58 0.70 0.76 6.83
213/5JM 11.0 H 7.2 2.1 3.0 0.4665 27 59 139 72.0 1.25 3520 87.5 89.5 89.5 0.75 0.84 0.88 8.76
213JM 22.0 H 7.1 2.2 3.1 1.34 20 44 154 58.0 1.25 1765 89.5 91.0 91.7 0.66 0.76 0.82 9.18
7.5 5.5
213/5JM 22.0 H 7.1 2.2 3.1 1.34 20 44 154 58.0 1.25 1765 89.5 91.0 91.7 0.66 0.76 0.82 9.18
254/6JM 33.1 H 6.8 2.5 3.0 3.92 30 66 262 59.0 1.25 1175 89.5 90.2 91.0 0.63 0.74 0.80 9.48
213/5JM 14.7 H 7.2 2.2 2.9 0.6362 24 53 163 72.0 1.25 3520 89.5 90.2 90.2 0.79 0.87 0.90 11.6
213/5JM 29.4 H 6.4 2.0 3.0 1.51 17 37 172 58.0 1.25 1765 91.0 91.7 91.7 0.66 0.77 0.83 12.4
10 7.5
215JM 29.4 H 6.4 2.0 3.0 1.51 17 37 172 58.0 1.25 1765 91.0 91.7 91.7 0.66 0.77 0.83 12.4
254/6JM 44.1 H 6.5 2.3 2.8 4.43 26 57 289 59.0 1.25 1175 90.2 91.0 91.0 0.63 0.74 0.78 13.3
254/6JM 22.0 G 6.7 2.2 2.7 1.26 25 55 236 72.0 1.25 3530 89.5 91.0 91.0 0.77 0.85 0.88 17.2
15 11 254/6JM 44.0 G 6.4 2.3 2.7 2.62 17 37 251 64.0 1.25 1765 91.0 91.7 92.4 0.68 0.78 0.83 18.0
284/6JM 66.1 G 6.4 2.3 2.7 7.85 20 44 379 59.0 1.25 1175 91.0 91.7 91.7 0.69 0.80 0.84 17.9
254/6JM 29.4 G 6.1 2.0 2.4 1.54 21 46 269 72.0 1.25 3520 91.0 91.7 91.0 0.82 0.87 0.89 23.2
20 15 254/6JM 58.7 H 6.9 2.3 2.7 3.10 15 33 291 64.0 1.25 1765 91.7 92.4 93.0 0.68 0.79 0.84 24.1
284/6JM 88.2 G 6.2 2.3 2.6 9.16 16 35 426 59.0 1.25 1175 91.0 91.7 91.7 0.70 0.80 0.85 24.2
284/6JM 36.6 G 6.3 2.0 2.5 2.69 17 37 362 72.0 1.25 3535 91.0 91.7 91.7 0.82 0.87 0.89 28.5
25 18.5 284/6JM 73.4 G 6.2 2.4 2.7 5.11 24 53 388 64.0 1.25 1765 92.4 93.0 93.6 0.70 0.80 0.84 29.5
324/6JM 110 G 6.2 2.1 2.6 11.5 26 57 560 62.0 1.25 1180 91.7 93.0 93.0 0.65 0.77 0.82 30.4
284/6JM 44.0 G 6.3 2.0 2.5 3.37 15 33 392 72.0 1.25 3535 91.7 91.7 91.7 0.82 0.87 0.89 33.8
Electrical Data
30 22 284/6JM 88.1 G 6.1 2.4 2.4 5.85 20 44 437 64.0 1.25 1765 93.0 93.0 93.6 0.70 0.80 0.84 35.1
324/6JM 132 G 6.2 2.3 2.6 13.2 21 46 628 62.0 1.25 1180 91.7 93.0 93.0 0.65 0.76 0.82 36.2
324/6JM 58.3 G 6.3 2.3 2.4 4.90 22 48 547 78.0 1.25 3555 91.7 92.4 92.4 0.82 0.87 0.89 45.8
40 30 324/6JM 117 G 6.1 2.2 2.4 9.16 20 44 492 66.0 1.25 1775 93.6 94.1 94.1 0.72 0.80 0.85 47.1
364/5JM 175 G 6.4 2.0 2.4 29.0 21 46 833 66.0 1.25 1185 93.6 93.6 94.1 0.73 0.82 0.86 46.5
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-33
Electrical Data
Close-Coupled Pump - JM - Three Phase - TEFC - Cast Iron - continued
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
324/6JM 73.0 F 6.2 2.2 2.3 5.75 23 51 584 78.0 1.25 3550 93.0 93.0 93.0 0.83 0.87 0.89 56.1
50 37 324/6JM 146 G 6.2 2.3 2.7 9.16 15 33 536 66.0 1.25 1775 93.0 94.1 94.5 0.66 0.77 0.83 59.2
364/5JM 220 G 6.4 2.0 2.4 32.4 18 40 869 66.0 1.25 1180 93.6 94.1 94.1 0.74 0.83 0.86 57.4
364/5JM 87.3 G 6.6 2.0 2.6 10.6 14 31 825 79.0 1.25 3560 91.7 93.0 93.6 0.81 0.88 0.90 67.0
60 45
364/5JM 175 G 6.6 2.4 2.6 22.4 15 33 869 67.0 1.25 1775 94.1 94.5 95.0 0.75 0.83 0.87 68.3
364/5JM 109 G 6.7 2.0 2.6 11.9 10 22 847 79.0 1.25 3555 92.4 93.6 93.6 0.83 0.88 0.90 81.9
75 55
364/5JM 219 G 6.4 2.4 2.6 23.3 14 31 919 67.0 1.25 1775 94.5 95.0 95.4 0.73 0.82 0.86 84.1
Electrical Data
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
143/5JP 1.48 K 7.8 2.0 3.0 0.0643 22 48 26.2 68.0 1.15 3510 72.0 77.0 78.5 0.65 0.76 0.83 1.44
1 0.75 143/5JP 2.94 M 8.6 2.8 3.0 0.1232 19 42 37.9 52.0 1.15 1765 82.5 84.0 85.5 0.52 0.66 0.75 1.47
143/5JP 4.52 J 5.8 2.3 2.8 0.1597 31 68 38.6 49.0 1.15 1145 80.0 82.5 82.5 0.50 0.63 0.72 1.58
143/5JP 2.21 L 9.1 2.3 3.0 0.1023 17 37 34.2 68.0 1.15 3520 80.0 82.5 84.0 0.71 0.82 0.88 1.87
1.5 1.1 143/5JP 4.44 K 8.2 2.7 3.0 0.1101 21 46 37.9 52.0 1.15 1750 85.5 86.5 86.5 0.59 0.72 0.79 2.02
182/4JP 6.64 K 6.9 2.4 3.4 0.2800 55 121 65.9 52.0 1.15 1170 84.0 86.5 87.5 0.50 0.63 0.71 2.22
143/5JP 2.94 L 9.9 2.5 3.0 0.1279 13 29 40.1 68.0 1.15 3520 82.5 85.5 85.5 0.73 0.83 0.89 2.47
2 1.5 143/5JP 5.94 K 8.2 2.7 3.0 0.1296 15 33 42.3 52.0 1.15 1745 85.5 87.5 86.5 0.60 0.73 0.80 2.72
182/4JP 8.86 K 7.5 2.6 3.7 0.3424 44 97 76.1 52.0 1.15 1170 84.0 86.5 88.5 0.50 0.62 0.71 3.00
182/4JP 4.42 K 8.8 2.2 3.0 0.1564 22 48 63.5 68.0 1.15 3515 84.0 86.5 86.5 0.71 0.82 0.87 3.67
3 2.2 182/4JP 8.81 K 8.8 2.2 3.0 0.4017 18 40 80.3 56.0 1.15 1765 87.5 88.5 89.5 0.61 0.74 0.81 3.81
213/5JP 13.2 H 6.4 2.3 2.9 1.08 46 101 130 55.0 1.15 1175 85.5 88.5 89.5 0.55 0.67 0.74 4.17
182/4JP 7.40 J 7.8 2.2 3.0 0.2079 17 37 78.5 68.0 1.15 3500 87.5 88.5 88.5 0.76 0.85 0.89 5.90
5 3.7 182/4JP 14.8 J 7.0 2.2 3.0 0.3080 16 35 71.4 56.0 1.15 1750 88.5 89.5 89.5 0.60 0.73 0.80 6.49
213/5JP 22.0 H 6.0 2.2 2.5 1.26 30 66 144 55.0 1.15 1175 87.5 88.5 89.5 0.59 0.71 0.77 6.74
213/5JP 11.0 H 7.6 2.6 3.0 0.5496 15 33 133 70.0 1.15 3530 87.5 88.5 89.5 0.76 0.85 0.89 8.67
7.5 5.5 213/5JP 22.0 H 7.3 2.6 3.0 0.9380 22 48 120 60.0 1.15 1770 90.2 91.0 91.7 0.64 0.76 0.82 9.07
254/6JP 33.1 G 5.4 2.0 2.3 2.34 42 92 204 59.0 1.15 1175 89.5 89.5 91.0 0.58 0.70 0.76 9.98
213/5JP 14.7 H 7.5 2.6 3.0 0.7188 12 26 161 70.0 1.15 3530 89.5 90.2 90.2 0.80 0.88 0.91 11.5
10 7.5 213/5JP 29.4 H 7.0 2.5 3.0 1.07 15 33 130 60.0 1.15 1760 91.0 91.0 91.7 0.67 0.78 0.84 12.2
254/6JP 44.1 G 5.4 2.1 2.3 2.83 30 66 234 59.0 1.15 1175 90.2 91.0 91.0 0.57 0.69 0.75 13.8
254/6JP 22.0 G 6.8 2.0 3.0 0.8718 14 31 175 75.0 1.15 3525 89.5 91.0 91.0 0.73 0.83 0.87 17.4
15 11
254/6JP 43.9 G 6.5 2.5 3.0 2.15 19 42 197 68.0 1.15 1770 91.0 92.4 92.4 0.64 0.76 0.82 18.2
254/6JP 29.5 G 6.6 2.0 2.9 1.22 12 26 211 75.0 1.15 3515 90.0 91.0 91.0 0.81 0.88 0.91 22.7
20 15
254/6JP 58.7 H 6.7 2.7 3.0 2.64 16 35 227 68.0 1.15 1765 91.7 92.4 93.0 0.66 0.77 0.82 24.7
25 18.5 254/6JP 36.7 J 8.3 2.4 3.4 1.31 8 18 221 75.0 1.15 3530 91.0 91.7 91.7 0.77 0.85 0.89 28.5
Electrical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-35
Electrical Data
Close-Coupled Pump - JP - Three Phase - TEFC - Cast Iron
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
143/5JP 1.49 L 8.2 2.8 3.4 0.0332 22 48 36.4 68.0 1.25 3480 75.0 79.0 81.5 0.63 0.74 0.80 1.44
1 0.75 143/5JP 2.94 L 8.4 3.2 3.5 0.1172 18 40 40.8 51.0 1.25 1760 80.0 84.0 85.5 0.55 0.68 0.75 1.47
143/5JP 4.51 K 6.2 2.6 3.0 0.1595 28 62 52.9 49.0 1.25 1150 77.0 82.0 82.5 0.45 0.57 0.66 1.73
143/5JP 2.23 L 8.9 3.5 3.8 0.0470 21 46 40.8 68.0 1.25 3490 81.5 84.0 84.0 0.70 0.80 0.84 1.96
1.5 1.1 143/5JP 4.43 L 8.4 2.5 3.4 0.1431 14 31 48.5 51.0 1.25 1755 82.5 85.5 86.5 0.60 0.70 0.79 2.02
182/4JP 6.64 M 7.8 3.2 4.0 0.4879 16 35 70.3 52.0 1.25 1170 84.0 86.5 87.5 0.45 0.54 0.62 2.54
143/5JP 2.98 L 8.9 3.5 3.8 0.0605 17 37 51.8 68.0 1.25 3475 82.5 85.5 85.5 0.71 0.80 0.86 2.56
2 1.5 143/5JP 5.92 K 8.0 2.7 3.2 0.1561 11 24 50.7 51.0 1.25 1750 85.5 86.5 86.5 0.57 0.70 0.79 2.76
182/4JP 8.89 L 7.5 3.0 3.0 0.6210 31 68 87.5 52.0 1.25 1165 86.5 88.5 88.5 0.46 0.58 0.66 3.23
182/4JP 4.42 K 8.6 2.5 3.8 0.1889 41 90 88.2 69.0 1.25 3515 82.5 86.5 86.5 0.75 0.84 0.88 3.63
3 2.2 182/4JP 8.83 K 8.1 2.3 3.4 0.3401 23 51 90.4 56.0 1.25 1760 87.5 88.5 89.5 0.61 0.73 0.79 3.91
213/5JP 13.2 K 7.0 2.0 2.8 1.20 58 128 121 55.0 1.25 1175 86.5 88.5 89.5 0.50 0.63 0.70 4.41
182/4JP 7.40 J 7.6 2.3 3.5 0.2233 25 55 88.2 69.0 1.25 3500 86.5 88.5 88.5 0.76 0.85 0.89 5.90
5 3.7 182/4JP 14.8 J 7.5 2.3 3.2 0.4003 15 33 94.8 56.0 1.25 1755 88.5 89.5 89.5 0.62 0.74 0.80 6.45
213/5JP 22.1 J 6.8 1.7 2.6 1.47 57 125 162 55.0 1.25 1170 88.5 89.5 89.5 0.58 0.70 0.76 6.83
213/5JP 11.0 H 7.2 2.1 3.0 0.4665 27 59 139 72.0 1.25 3520 87.5 89.5 89.5 0.75 0.84 0.88 8.76
7.5 5.5 213/5JP 22.0 H 7.1 2.2 3.1 1.34 20 44 154 58.0 1.25 1765 89.5 91.0 91.7 0.66 0.76 0.82 9.18
254/6JP 33.1 H 6.8 2.5 3.0 3.92 30 66 262 59.0 1.25 1175 89.5 90.2 91.0 0.63 0.74 0.80 9.48
213/5JP 14.7 H 7.2 2.2 2.9 0.6362 24 53 163 72.0 1.25 3520 89.5 90.2 90.2 0.79 0.87 0.90 11.6
10 7.5 213/5JP 29.4 H 6.4 2.0 3.0 1.51 17 37 172 58.0 1.25 1765 91.0 91.7 91.7 0.66 0.77 0.83 12.4
254/6JP 44.1 H 6.5 2.3 2.8 4.43 26 57 289 59.0 1.25 1175 90.2 91.0 91.0 0.63 0.74 0.78 13.3
254/6JP 22.0 G 6.7 2.2 2.7 1.26 25 55 236 72.0 1.25 3530 89.5 91.0 91.0 0.77 0.85 0.88 17.2
15 11 254/6JP 44.0 G 6.4 2.3 2.7 2.62 17 37 251 64.0 1.25 1765 91.0 91.7 92.4 0.68 0.78 0.83 18.0
284/6JP 66.1 G 6.4 2.3 2.7 7.85 20 44 379 59.0 1.25 1175 91.0 91.7 91.7 0.69 0.80 0.84 17.9
254/6JP 29.4 G 6.1 2.0 2.4 1.54 21 46 269 72.0 1.25 3520 91.0 91.7 91.0 0.82 0.87 0.89 23.2
20 15 254/6JP 58.7 H 6.9 2.3 2.7 3.10 15 33 291 64.0 1.25 1765 91.7 92.4 93.0 0.68 0.79 0.84 24.1
284/6JP 88.2 G 6.2 2.3 2.6 9.16 16 35 426 59.0 1.25 1175 91.0 91.7 91.7 0.70 0.80 0.85 24.2
284/6JP 36.6 G 6.3 2.0 2.5 2.69 17 37 362 72.0 1.25 3535 91.0 91.7 91.7 0.82 0.87 0.89 28.5
25 18.5 284/6JP 73.4 G 6.2 2.4 2.7 5.11 24 53 388 64.0 1.25 1765 92.4 93.0 93.6 0.70 0.80 0.84 29.5
324/6JP 110 G 6.2 2.1 2.6 11.5 26 57 560 62.0 1.25 1180 91.7 93.0 93.0 0.65 0.77 0.82 30.4
284/6JP 44.0 G 6.3 2.0 2.5 3.37 15 33 392 72.0 1.25 3535 91.7 91.7 91.7 0.82 0.87 0.89 33.8
30 22 284/6JP 88.1 G 6.1 2.4 2.4 5.85 20 44 437 64.0 1.25 1765 93.0 93.0 93.6 0.70 0.80 0.84 35.1
324/6JP 132 G 6.2 2.3 2.6 13.2 21 46 628 62.0 1.25 1180 91.7 93.0 93.0 0.65 0.76 0.82 36.2
Electrical Data
324JP 58.3 G 6.3 2.3 2.4 4.90 22 48 547 78.0 1.25 3555 91.7 92.4 92.4 0.82 0.87 0.89 45.8
40 30 324/6JP 117 G 6.1 2.2 2.4 9.16 20 44 492 66.0 1.25 1775 93.6 94.1 94.1 0.72 0.80 0.85 47.1
364/5JP 175 G 6.4 2.0 2.4 29.0 21 46 833 66.0 1.25 1185 93.6 93.6 94.1 0.73 0.82 0.86 46.5
324/6JP 73.0 F 6.2 2.2 2.3 5.75 23 51 584 78.0 1.25 3550 93.0 93.0 93.0 0.83 0.87 0.89 56.1
50 37 324/6JP 146 G 6.2 2.3 2.7 9.16 15 33 536 66.0 1.25 1775 93.0 94.1 94.5 0.66 0.77 0.83 59.2
364/5JP 220 G 6.4 2.0 2.4 32.4 18 40 869 66.0 1.25 1180 93.6 94.1 94.1 0.74 0.83 0.86 57.4
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
364/5JP 87.3 G 6.6 2.0 2.6 10.6 14 31 825 79.0 1.25 3560 91.7 93.0 93.6 0.81 0.88 0.90 67.0
60 45 364/5JP 175 G 6.6 2.4 2.6 22.4 15 33 869 67.0 1.25 1775 94.1 94.5 95.0 0.75 0.83 0.87 68.3
404/5JP 262 H 7.1 2.0 2.3 36.9 20 44 1036 68.0 1.25 1185 94.1 94.5 94.5 0.74 0.82 0.86 69.5
364/5JP 109 G 6.7 2.0 2.6 11.9 10 22 847 79.0 1.25 3555 92.4 93.6 93.6 0.83 0.88 0.90 81.9
75 55 364/5JP 219 G 6.4 2.4 2.6 23.3 14 31 919 67.0 1.25 1775 94.5 95.0 95.4 0.73 0.82 0.86 84.1
404/5JP 329 G 6.4 2.0 2.3 40.2 17 37 1089 68.0 1.25 1180 94.1 94.5 94.5 0.74 0.83 0.86 84.9
404/5JP 146 G 6.5 2.0 2.4 13.2 14 31 1045 79.0 1.25 3545 93.0 94.1 94.1 0.85 0.90 0.91 110
100 75
404/5JP 292 H 7.3 2.4 2.6 29.9 13 29 1140 68.0 1.25 1775 95.0 95.0 95.4 0.77 0.84 0.88 111
Electrical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-37
Electrical Data
Close-Coupled Pump - JM - Three Phase - ODP - Rolled Steel
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
143/5JM 1.48 L 8.3 2.1 3.3 0.0643 22 48 25.4 62.0 1.15 3510 74.0 78.5 80.0 0.66 0.78 0.85 1.38
1 0.75 143/5JM 2.94 L 8.0 2.9 3.6 0.1101 22 48 34.4 52.0 1.15 1760 81.5 84.0 85.5 0.51 0.65 0.73 1.51
143/5JM 4.51 K 6.1 2.5 3.0 0.1419 24 53 35.3 49.0 1.15 1150 78.5 81.5 82.5 0.47 0.60 0.69 1.65
143/5JM 2.21 K 8.6 2.1 3.3 0.0835 19 42 29.3 62.0 1.15 3510 81.5 84.0 84.0 0.73 0.83 0.89 1.85
1.5 1.1 143/5JM 4.42 L 8.7 2.8 3.3 0.1426 15 33 41.9 52.0 1.15 1760 84.0 86.5 86.5 0.56 0.69 0.77 2.07
182/4JM 6.67 J 6.5 2.0 3.1 0.2178 46 101 56.0 52.0 1.15 1165 84.0 85.5 86.5 0.51 0.63 0.71 2.25
143/5JM 2.95 K 8.9 2.2 3.3 0.1151 14 31 36.8 62.0 1.15 3510 84.0 85.5 85.5 0.77 0.86 0.91 2.42
2 1.5 143/5JM 5.96 K 7.7 2.6 3.2 0.1168 17 37 39.0 52.0 1.15 1740 85.5 86.5 86.5 0.61 0.74 0.81 2.69
182/4JM 8.89 J 6.6 2.0 3.0 0.2800 33 73 66.1 52.0 1.15 1165 85.5 86.5 87.5 0.53 0.66 0.73 2.95
143/5JM 4.47 J 8.0 2.3 3.0 0.1279 9 20 39.9 62.0 1.15 3480 84.0 85.5 85.5 0.76 0.86 0.90 3.59
3 2.2 182/4JM 8.81 K 8.4 2.2 3.3 0.3092 15 33 65.9 55.0 1.15 1765 87.5 88.5 89.5 0.60 0.73 0.80 3.86
213/5JM 13.2 H 5.9 2.1 2.6 0.8104 39 86 98.3 55.0 1.15 1175 86.5 87.5 88.5 0.56 0.68 0.75 4.16
182/4JM 7.38 J 7.6 1.9 3.0 0.1386 12 26 58.7 65.0 1.15 3510 85.5 86.5 86.5 0.73 0.83 0.88 6.10
5 3.7 182/4JM 14.7 J 7.2 2.0 3.1 0.4003 12 26 79.8 55.0 1.15 1760 88.5 88.5 89.5 0.63 0.76 0.82 6.33
213/5JM 22.0 H 5.9 2.2 2.5 1.08 29 64 118 55.0 1.15 1175 88.5 89.5 89.5 0.58 0.70 0.77 6.74
182/4JM 11.1 H 7.4 1.8 2.9 0.1818 10 22 69.9 65.0 1.15 3500 88.5 88.5 88.5 0.76 0.85 0.90 8.67
7.5 5.5 213/5JM 22.0 H 7.2 2.4 3.2 1.03 13 29 116 59.0 1.15 1770 89.5 90.2 91.0 0.65 0.77 0.82 9.25
254/6JM 33.1 F 5.1 2.0 2.3 2.00 37 81 187 59.0 1.15 1175 88.5 90.2 90.2 0.56 0.68 0.75 10.2
213/5JM 14.7 H 6.8 2.0 2.8 0.4651 11 24 117 66.0 1.15 3535 88.5 89.5 89.5 0.74 0.84 0.88 12.0
10 7.5 213/5JM 29.3 H 7.0 2.5 3.5 1.30 14 31 137 59.0 1.15 1770 90.2 91.0 91.7 0.64 0.77 0.83 12.4
254/6JM 43.9 G 5.3 2.1 2.3 2.50 34 75 209 59.0 1.15 1180 91.0 91.7 91.7 0.56 0.68 0.74 13.9
213/5JM 22.0 G 6.8 2.1 2.8 0.5512 8 18 131 66.0 1.15 3535 90.2 90.2 90.2 0.77 0.86 0.89 17.2
15 11
254/6JM 43.8 H 6.7 2.4 3.0 1.82 17 37 175 64.0 1.15 1775 91.7 92.4 93.0 0.62 0.73 0.80 18.6
254/6JM 29.4 G 6.0 1.8 2.4 0.7848 13 29 151 70.0 1.15 3525 90.2 91.0 91.0 0.76 0.83 0.87 23.8
20 15
254/6JM 58.5 G 6.3 2.4 2.9 2.23 15 33 198 64.0 1.15 1770 92.4 92.4 93.0 0.63 0.74 0.81 25.0
25 18.5 254/6JM 36.7 G 6.3 1.8 2.9 0.9155 9 20 174 70.0 1.15 3530 91.0 91.7 91.7 0.73 0.83 0.87 29.1
Electrical Data
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
7.5 5.5 254JM 32.9 H 6.7 2.6 3.0 2.29 16 35 240 59.0 1.25 1180 87.5 89.5 90.2 0.58 0.70 0.77 9.94
10 7.5 254/6JM 43.9 H 6.8 2.3 3.0 3.53 17 37 300 59.0 1.25 1180 90.2 91.0 91.7 0.62 0.74 0.80 12.8
254JM 43.9 G 6.4 2.4 2.8 2.72 17 37 289 62.0 1.25 1770 91.7 92.4 93.0 0.66 0.78 0.85 17.5
15 11
284JM 65.9 G 6.3 2.6 2.6 4.80 16 35 337 59.0 1.25 1180 91.0 91.7 91.7 0.67 0.77 0.82 18.4
254JM 29.3 G 6.3 2.0 2.8 0.8718 12 26 240 --- 1.25 3535 90.2 91.0 91.0 0.72 0.82 0.85 24.3
20 15 254/6JM 58.7 G 6.4 2.2 2.8 3.13 12 26 320 62.0 1.25 1765 92.4 93.0 93.0 0.69 0.79 0.84 24.1
284/6JM 88.0 G 6.4 2.3 2.6 6.89 15 33 410 59.0 1.25 1177 91.7 92.4 92.4 0.71 0.80 0.84 24.3
254/6JM 36.6 G 6.5 2.0 2.8 1.13 11 24 276 --- 1.25 3535 91.0 91.7 91.7 0.77 0.85 0.88 28.8
25 18.5 284JM 73.2 G 6.6 2.7 2.8 3.71 17 37 370 64.0 1.25 1770 93.0 93.6 93.6 0.69 0.80 0.84 29.5
324JM 109 G 6.2 2.1 2.5 7.69 18 40 474 62.0 1.25 1183 91.7 92.4 93.0 0.65 0.76 0.81 30.8
284JM 43.8 G 6.3 1.8 2.8 1.59 10 22 324 73.0 1.25 3545 90.2 91.7 91.7 0.73 0.82 0.86 35.0
30 22 284/6JM 87.8 G 6.6 2.8 2.8 4.52 18 40 421 64.0 1.25 1770 93.6 94.1 94.1 0.70 0.80 0.84 34.9
324/6JM 131 G 6.3 2.0 2.4 9.56 17 37 545 62.0 1.25 1182 92.4 93.0 93.6 0.70 0.79 0.82 36.0
284/6JM 58.5 G 6.5 1.9 2.6 2.02 8 18 370 73.0 1.25 3540 91.7 92.4 92.4 0.76 0.84 0.87 46.8
40 30 324JM 117 G 6.2 2.0 2.4 5.69 13 29 472 66.0 1.25 1775 93.6 94.1 94.1 0.70 0.80 0.84 47.6
364/5JM 175 G 6.4 2.0 2.3 21.8 22 48 787 68.0 1.25 1185 93.6 94.1 94.1 0.74 0.82 0.85 47.1
324JM 72.8 G 6.3 2.0 2.2 3.02 14 31 450 75.0 1.25 3560 91.7 93.0 93.0 0.73 0.82 0.85 58.7
50 37 324/6JM 146 G 6.3 2.4 2.4 7.08 11 24 542 66.0 1.25 1775 94.1 94.5 94.5 0.70 0.80 0.84 58.5
364/5JM 219 G 6.7 2.2 2.4 23.9 15 33 820 68.0 1.25 1185 93.6 94.1 94.1 0.74 0.82 0.85 58.1
324/6JM 87.3 G 6.3 2.2 2.3 3.82 12 26 514 75.0 1.25 3560 92.4 93.0 93.6 0.73 0.82 0.85 71.0
60 45
364/5JM 175 G 6.5 2.0 2.4 15.6 19 42 785 69.0 1.25 1780 94.5 95.0 95.0 0.73 0.82 0.85 69.9
364/5JM 109 G 6.6 2.0 2.5 6.40 19 42 736 84.0 1.25 3560 91.7 93.0 93.6 0.77 0.84 0.87 84.8
75 55
364/5JM 218 G 6.8 2.2 2.6 16.8 14 31 811 69.0 1.25 1780 94.5 95.0 95.0 0.73 0.82 0.85 85.5
100 75 364/5JM 146 G 6.6 1.8 2.3 7.20 13 29 774 84.0 1.25 3555 92.4 93.6 93.6 0.77 0.84 0.87 116
Electrical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-39
Electrical Data
Close-Coupled Pump - JP - Three Phase - ODP - Rolled Steel
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
143/5JP 1.48 L 8.3 2.1 3.3 0.0643 22 48 25.4 62.0 1.15 3510 74.0 78.5 80.0 0.66 0.78 0.85 1.38
1 0.75 143/5JP 2.94 L 8.0 2.9 3.6 0.1101 22 48 34.4 52.0 1.15 1760 81.5 84.0 85.5 0.51 0.65 0.73 1.51
143/5JP 4.51 K 6.1 2.5 3.0 0.1419 24 53 35.3 49.0 1.15 1150 78.5 81.5 82.5 0.47 0.60 0.69 1.65
143/5JP 2.21 K 8.6 2.1 3.3 0.0835 19 42 29.3 62.0 1.15 3510 81.5 84.0 84.0 0.73 0.83 0.89 1.85
1.5 1.1 143/5JP 4.42 L 8.7 2.8 3.3 0.1426 15 33 41.9 52.0 1.15 1760 84.0 86.5 86.5 0.56 0.69 0.77 2.07
182/4JP 6.67 J 6.5 2.0 3.1 0.2178 46 101 56.0 52.0 1.15 1165 84.0 85.5 86.5 0.51 0.63 0.71 2.25
143/5JP 2.95 K 8.9 2.2 3.3 0.1151 14 31 36.8 62.0 1.15 3510 84.0 85.5 85.5 0.77 0.86 0.91 2.42
2 1.5 143/5JP 5.96 K 7.7 2.6 3.2 0.1168 17 37 39.0 52.0 1.15 1740 85.5 86.5 86.5 0.61 0.74 0.81 2.69
182/4JP 8.89 J 6.6 2.0 3.0 0.2800 33 73 66.1 52.0 1.15 1165 85.5 86.5 87.5 0.53 0.66 0.73 2.95
143/5JP 4.47 J 8.0 2.3 3.0 0.1279 9 20 39.9 62.0 1.15 3480 84.0 85.5 85.5 0.76 0.86 0.90 3.59
3 2.2 182/4JP 8.81 K 8.4 2.2 3.3 0.3092 15 33 65.9 55.0 1.15 1765 87.5 88.5 89.5 0.60 0.73 0.80 3.86
213/5JP 13.2 H 5.9 2.1 2.6 0.8104 39 86 98.3 55.0 1.15 1175 86.5 87.5 88.5 0.56 0.68 0.75 4.16
182/4JP 7.38 J 7.6 1.9 3.0 0.1386 12 26 58.7 65.0 1.15 3510 85.5 86.5 86.5 0.73 0.83 0.88 6.10
5 3.7 182/4JP 14.7 J 7.2 2.0 3.1 0.4003 12 26 79.8 55.0 1.15 1760 88.5 88.5 89.5 0.63 0.76 0.82 6.33
213/5JP 22.0 H 5.9 2.2 2.5 1.08 29 64 118 55.0 1.15 1175 88.5 89.5 89.5 0.58 0.70 0.77 6.74
182/4JP 11.1 H 7.4 1.8 2.9 0.1818 10 22 69.9 65.0 1.15 3500 88.5 88.5 88.5 0.76 0.85 0.90 8.67
7.5 5.5 213/5JP 22.0 H 7.2 2.4 3.2 1.03 13 29 116 59.0 1.15 1770 89.5 90.2 91.0 0.65 0.77 0.82 9.25
254/6JP 33.1 F 5.1 2.0 2.3 2.00 37 81 187 59.0 1.15 1175 88.5 90.2 90.2 0.56 0.68 0.75 10.2
213/5JP 14.7 H 6.8 2.0 2.8 0.4651 11 24 117 66.0 1.15 3535 88.5 89.5 89.5 0.74 0.84 0.88 12.0
10 7.5 213/5JP 29.3 H 7.0 2.5 3.5 1.30 14 31 137 59.0 1.15 1770 90.2 91.0 91.7 0.64 0.77 0.83 12.4
254/6JP 43.9 G 5.3 2.1 2.3 2.50 34 75 209 59.0 1.15 1180 91.0 91.7 91.7 0.56 0.68 0.74 13.9
213/5JP 22.0 G 6.8 2.1 2.8 0.5512 8 18 131 66.0 1.15 3535 90.2 90.2 90.2 0.77 0.86 0.89 17.2
15 11
254/6JP 43.8 H 6.7 2.4 3.0 1.82 17 37 175 64.0 1.15 1775 91.7 92.4 93.0 0.62 0.73 0.80 18.6
254/6JP 29.4 G 6.0 1.8 2.4 0.7848 13 29 151 70.0 1.15 3525 90.2 91.0 91.0 0.76 0.83 0.87 23.8
20 15
254/6JP 58.5 G 6.3 2.4 2.9 2.23 15 33 198 64.0 1.15 1770 92.4 92.4 93.0 0.63 0.74 0.81 25.0
25 18.5 254/6JP 36.7 G 6.3 1.8 2.9 0.9155 9 20 174 70.0 1.15 3530 91.0 91.7 91.7 0.73 0.83 0.87 29.1
Electrical Data
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
7.5 5.5 254JP 32.9 H 6.7 2.6 3.0 2.29 16 35 240 59.0 1.25 1180 87.5 89.5 90.2 0.58 0.70 0.77 9.94
10 7.5 254/6JP 43.9 H 6.8 2.3 3.0 3.53 17 37 300 59.0 1.25 1180 90.2 91.0 91.7 0.62 0.74 0.80 12.8
254JP 43.9 G 6.4 2.4 2.8 2.72 17 37 289 62.0 1.25 1770 91.7 92.4 93.0 0.66 0.78 0.85 17.5
15 11
284JP 65.9 G 6.3 2.6 2.6 4.80 16 35 337 59.0 1.25 1180 91.0 91.7 91.7 0.67 0.77 0.82 18.4
254JP 29.3 G 6.3 2.0 2.8 0.8718 12 26 240 --- 1.25 3535 90.2 91.0 91.0 0.72 0.82 0.85 24.3
20 15 254/6JP 58.7 G 6.4 2.2 2.8 3.13 12 26 320 62.0 1.25 1765 92.4 93.0 93.0 0.69 0.79 0.84 24.1
284/6JP 88.0 G 6.4 2.3 2.6 6.89 15 33 410 59.0 1.25 1177 91.7 92.4 92.4 0.71 0.80 0.84 24.3
254/6JP 36.6 G 6.5 2.0 2.8 1.13 11 24 276 --- 1.25 3535 91.0 91.7 91.7 0.77 0.85 0.88 28.8
25 18.5 284JP 73.2 G 6.6 2.7 2.8 3.71 17 37 370 64.0 1.25 1770 93.0 93.6 93.6 0.69 0.80 0.84 29.5
324JP 109 G 6.2 2.1 2.5 7.69 18 40 474 62.0 1.25 1183 91.7 92.4 93.0 0.65 0.76 0.81 30.8
284JP 43.8 G 6.3 1.8 2.8 1.59 10 22 324 73.0 1.25 3545 90.2 91.7 91.7 0.73 0.82 0.86 35.0
30 22 284/6JP 87.8 G 6.6 2.8 2.8 4.52 18 40 421 64.0 1.25 1770 93.6 94.1 94.1 0.70 0.80 0.84 34.9
324/6JP 131 G 6.3 2.0 2.4 9.56 17 37 545 62.0 1.25 1182 92.4 93.0 93.6 0.70 0.79 0.82 36.0
284/6JP 58.5 G 6.5 1.9 2.6 2.02 8 18 370 73.0 1.25 3540 91.7 92.4 92.4 0.76 0.84 0.87 46.8
40 30 324JP 117 G 6.2 2.0 2.4 5.69 13 29 472 66.0 1.25 1775 93.6 94.1 94.1 0.70 0.80 0.84 47.6
364/5JP 175 G 6.4 2.0 2.3 21.8 22 48 787 68.0 1.25 1185 93.6 94.1 94.1 0.74 0.82 0.85 47.1
324JP 72.8 G 6.3 2.0 2.2 3.02 14 31 450 75.0 1.25 3560 91.7 93.0 93.0 0.73 0.82 0.85 58.7
50 37 324/6JP 146 G 6.3 2.4 2.4 7.08 11 24 542 66.0 1.25 1775 94.1 94.5 94.5 0.70 0.80 0.84 58.5
364/5JP 219 G 6.7 2.2 2.4 23.9 15 33 820 68.0 1.25 1185 93.6 94.1 94.1 0.74 0.82 0.85 58.1
324/6JP 87.3 G 6.3 2.2 2.3 3.82 12 26 514 75.0 1.25 3560 92.4 93.0 93.6 0.73 0.82 0.85 71.0
60 45 364/5JP 175 G 6.5 2.0 2.4 15.6 19 42 785 69.0 1.25 1780 94.5 95.0 95.0 0.73 0.82 0.85 69.9
404/5JP 262 G 6.7 2.4 2.5 29.4 16 35 975 68.0 1.25 1185 91.7 94.5 94.5 0.73 0.82 0.85 70.3
364/5JP 109 G 6.6 2.0 2.5 6.40 19 42 736 84.0 1.25 3560 91.7 93.0 93.6 0.77 0.84 0.87 84.8
75 55 364/5JP 218 G 6.8 2.2 2.6 16.8 14 31 811 69.0 1.25 1780 94.5 95.0 95.0 0.73 0.82 0.85 85.5
404/5JP 328 G 6.7 2.4 2.7 31.6 11 24 1008 68.0 1.25 1185 94.1 94.5 94.5 0.72 0.81 0.85 85.9
364/5JP 146 G 6.6 1.8 2.3 7.20 13 29 774 84.0 1.25 3555 92.4 93.6 93.6 0.77 0.84 0.87 116
100 75
404/5JP 291 G 6.8 2.0 2.5 21.9 12 26 992 69.0 1.25 1780 95.0 95.4 95.4 0.75 0.83 0.86 115
404/5JP 182 G 6.8 1.7 2.6 8.23 12 26 886 84.0 1.25 3557 93.0 94.1 94.1 0.79 0.86 0.88 136
125 90
404/5JP 364 G 6.9 2.7 2.6 25.5 10 22 1072 69.0 1.25 1780 95.0 95.4 95.4 0.75 0.83 0.86 138
150 110 404/5JP 219 G 6.6 2.0 2.5 8.80 9 20 931 84.0 1.25 3552 93.6 94.1 94.1 0.79 0.86 0.88 167 Electrical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-41
Electrical Data
W40 - Fire Pump - Three Phase - ODP - High Efficiency
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
7.5 5.5 254T 33.0 H 6.4 2.0 2.5 2.29 25 55 240 --- 1.15 1178 86.5 88.5 88.5 0.64 0.75 0.81 9.63
10 7.5 254/6T 44.1 H 6.3 2.3 2.6 3.12 24 53 284 --- 1.15 1175 87.5 89.5 90.2 0.65 0.76 0.82 12.7
254T 44.0 G 6.1 2.0 2.5 2.14 18 40 258 --- 1.15 1765 89.5 91.0 91.0 0.67 0.78 0.83 18.3
15 11
284T 66.1 G 6.2 2.2 2.3 4.48 23 51 326 --- 1.15 1175 89.5 90.2 90.2 0.71 0.81 0.85 18.0
254T 29.4 G 5.9 1.7 2.4 0.8718 16 35 238 --- 1.15 3530 89.5 90.2 90.2 0.77 0.85 0.86 24.3
20 15 254/6T 58.9 G 5.8 2.3 2.7 2.63 13 29 293 --- 1.15 1760 90.2 91.0 91.0 0.70 0.80 0.84 24.6
284/6T 88.2 G 5.8 2.5 2.3 5.45 17 37 366 --- 1.15 1175 90.2 91.0 91.0 0.71 0.81 0.84 24.6
254/6T 36.7 G 6.1 1.9 2.6 0.9592 15 33 260 --- 1.15 3530 89.5 91.0 91.0 0.72 0.82 0.86 29.7
25 18.5 284T 73.4 G 6.0 2.3 2.3 2.88 23 51 331 --- 1.15 1765 91.0 91.7 91.7 0.68 0.79 0.84 30.1
324T 110 G 5.9 1.8 2.2 6.66 20 44 445 --- 1.15 1180 91.0 91.7 91.7 0.67 0.77 0.82 30.9
284TS 43.9 G 6.2 1.7 2.6 1.59 16 35 324 --- 1.15 3540 90.2 91.0 91.0 0.74 0.83 0.87 34.9
30 22 284/6T 88.1 G 6.3 2.5 2.5 3.70 22 48 381 --- 1.15 1765 91.7 92.4 92.4 0.71 0.80 0.84 35.6
324/6T 132 G 6.0 1.8 2.2 7.50 16 35 485 --- 1.15 1180 91.0 91.7 92.4 0.67 0.77 0.82 36.4
284/6TS 58.6 G 6.1 1.7 2.5 1.91 10 22 359 --- 1.15 3535 91.0 91.7 91.7 0.78 0.86 0.87 47.2
40 30 324T 117 G 6.0 1.8 2.1 5.37 20 44 459 --- 1.15 1775 92.4 93.0 93.0 0.72 0.81 0.84 48.2
364/5T 175 G 6.1 1.5 2.0 18.5 28 62 736 --- 1.15 1185 92.4 93.0 93.0 0.76 0.84 0.86 47.1
324TS 72.9 F 5.8 1.7 2.0 3.01 20 44 450 --- 1.15 3555 91.7 92.4 92.4 0.78 0.84 0.86 58.4
50 37 324/6T 146 G 6.0 2.4 2.3 5.98 15 33 498 --- 1.15 1775 92.4 93.0 93.0 0.67 0.78 0.83 60.2
364/5T 219 G 6.2 2.0 2.1 20.7 20 44 770 --- 1.15 1185 92.4 93.0 93.0 0.76 0.84 0.86 58.1
324/6TS 87.4 F 5.9 1.8 2.0 3.41 17 37 490 --- 1.15 3555 92.4 93.0 93.0 0.78 0.84 0.86 70.6
60 45 364/5T 175 G 6.1 1.8 2.3 12.8 22 48 723 --- 1.15 1777 93.0 93.6 93.6 0.73 0.82 0.85 71.0
404/5T 263 G 6.1 1.9 2.0 25.0 17 37 904 --- 1.15 1180 93.0 93.6 93.6 0.78 0.85 0.86 70.2
364/5TS 109 F 5.8 1.6 2.1 5.60 26 57 703 --- 1.15 3555 91.0 92.4 93.0 0.80 0.85 0.87 85.3
75 55 364/5T 219 G 6.3 1.8 2.3 15.2 19 42 774 --- 1.15 1775 93.6 94.1 94.1 0.75 0.83 0.86 85.3
404/5T 329 G 6.3 1.8 2.1 27.2 14 31 939 --- 1.15 1180 93.0 93.6 93.6 0.76 0.82 0.86 85.8
364/5TS 146 F 5.7 1.7 2.3 6.80 15 33 756 --- 1.15 3550 92.4 93.0 93.0 0.80 0.85 0.88 115
100 75 404/5T 292 G 6.2 2.2 2.5 17.5 14 31 895 --- 1.15 1775 93.6 94.1 94.1 0.76 0.84 0.86 116
444/5T 436 G 5.8 2.0 2.2 60.6 24 53 1358 --- 1.15 1187 93.6 94.1 94.1 0.66 0.77 0.81 124
404/5TS 183 G 6.6 1.8 2.3 8.03 15 33 878 84.0 1.15 3545 93.0 93.6 93.6 0.80 0.86 0.88 137
125 90 404/5T 365 G 6.5 2.1 2.3 21.5 12 26 983 --- 1.15 1775 94.1 94.5 94.5 0.76 0.84 0.86 139
444/5T 547 G 6.1 1.7 2.3 63.2 16 35 1387 --- 1.15 1185 93.0 94.1 94.1 0.65 0.76 0.81 148
404/5TS 219 G 6.6 1.7 2.2 9.20 11 24 931 --- 1.15 3550 93.0 93.6 93.6 0.84 0.89 0.90 164
Electrical Data
150 110 444/5T 437 G 6.4 1.9 2.0 42.3 20 44 1365 --- 1.15 1780 94.5 95.0 95.0 0.77 0.84 0.86 169
444/5T 656 G 6.0 1.7 2.2 76.4 15 33 1530 --- 1.15 1185 93.6 94.5 94.5 0.67 0.77 0.81 180
444/5TS 291 F 5.8 1.4 2.1 21.8 27 59 1341 --- 1.15 3565 93.0 94.1 94.5 0.82 0.87 0.89 224
200 150
444/5T 582 G 6.2 1.8 2.1 42.3 20 44 1365 --- 1.15 1780 94.5 95.0 95.0 0.77 0.83 0.86 230
444/5TS 363 G 6.4 1.3 2.2 23.8 20 44 1405 --- 1.15 3570 93.6 94.5 94.5 0.77 0.84 0.87 282
250 185
444/5T 728 G 6.4 1.9 2.2 51.5 17 37 1513 --- 1.15 1780 95.0 95.4 95.4 0.77 0.84 0.86 283
444/5TS 437 F 5.9 1.3 2.0 28.1 16 35 1524 --- 1.15 3560 94.1 94.5 95.0 0.85 0.89 0.89 327
300 220
447/9T 873 F 6.0 2.2 2.3 56.1 10 22 2150 78.0 1.15 1780 95.4 95.4 95.5 0.78 0.84 0.86 336
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
447/9TS 509 G 6.5 1.7 2.5 35.7 14 31 1874 87.0 1.15 3565 94.5 95.0 95.0 0.83 0.88 0.89 386
350 260
447/9T 1019 F 6.0 2.4 2.6 66.1 10 22 2370 78.0 1.15 1780 95.4 95.8 95.5 0.79 0.85 0.87 393
447/9TS 581 F 6.0 1.5 2.3 39.1 14 31 1951 87.0 1.15 3565 95.0 95.4 95.4 0.83 0.88 0.89 443
400 300
447/9T 1164 H 7.7 2.6 2.7 77.6 9 20 2591 78.0 1.15 1780 95.8 95.8 95.5 0.81 0.87 0.89 443
450 330 447/9TS 654 F 6.0 1.6 2.2 43.6 14 31 2139 87.0 1.15 3565 95.0 95.4 95.8 0.84 0.89 0.90 480
500 370 447/9TS 727 F 6.0 1.6 2.3 46.9 14 31 2194 87.0 1.15 3565 95.0 95.4 95.8 0.84 0.89 0.90 539
Electrical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-43
Electrical Data
W40 - Fire Pump - JM - Three Phase - ODP - Cast Iron - High Efficiency
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
7.5 5.5 254JM 33.0 H 6.4 2.0 2.5 2.29 25 55 240 --- 1.15 1178 86.5 88.5 88.5 0.64 0.75 0.81 9.63
10 7.5 254/6JM 44.1 H 6.3 2.3 2.6 3.12 24 53 284 --- 1.15 1175 87.5 89.5 90.2 0.65 0.76 0.82 12.7
254JM 44.0 G 6.1 2.0 2.5 2.14 18 40 258 --- 1.15 1765 89.5 91.0 91.0 0.67 0.78 0.83 18.3
15 11
284JM 66.1 G 6.2 2.2 2.3 4.48 23 51 326 --- 1.15 1175 89.5 90.2 90.2 0.71 0.81 0.85 18.0
254JM 29.4 G 5.9 1.7 2.4 0.8718 16 35 238 --- 1.15 3530 89.5 90.2 90.2 0.77 0.85 0.86 24.3
20 15 254/6JM 58.9 G 5.8 2.3 2.7 2.63 13 29 293 --- 1.15 1760 90.2 91.0 91.0 0.70 0.80 0.84 24.6
284/6JM 88.2 G 5.8 2.5 2.3 5.45 17 37 366 --- 1.15 1175 90.2 91.0 91.0 0.71 0.81 0.84 24.6
254/6JM 36.7 G 6.1 1.9 2.6 0.9592 15 33 260 --- 1.15 3530 89.5 91.0 91.0 0.72 0.82 0.86 29.7
25 18.5 284JM 73.4 G 6.0 2.3 2.3 2.88 23 51 331 --- 1.15 1765 91.0 91.7 91.7 0.68 0.79 0.84 30.1
324JM 110 G 5.9 1.8 2.2 6.66 20 44 445 --- 1.15 1180 91.0 91.7 91.7 0.67 0.77 0.82 30.9
284JM 43.9 G 6.2 1.7 2.6 1.59 16 35 324 --- 1.15 3540 90.2 91.0 91.0 0.74 0.83 0.87 34.9
30 22 284/6JM 88.1 G 6.3 2.5 2.5 3.70 22 48 381 --- 1.15 1765 91.7 92.4 92.4 0.71 0.80 0.84 35.6
324/6JM 132 G 6.0 1.8 2.2 7.50 16 35 485 --- 1.15 1180 91.0 91.7 92.4 0.67 0.77 0.82 36.4
284/6JM 58.6 G 6.1 1.7 2.5 1.91 10 22 359 --- 1.15 3535 91.0 91.7 91.7 0.78 0.86 0.87 47.2
40 30 324JM 117 G 6.0 1.8 2.1 5.37 20 44 459 --- 1.15 1775 92.4 93.0 93.0 0.72 0.81 0.84 48.2
364/5JM 175 G 6.1 1.5 2.0 18.5 28 62 736 --- 1.15 1185 92.4 93.0 93.0 0.76 0.84 0.86 47.1
324JM 72.9 F 5.8 1.7 2.0 3.01 20 44 450 --- 1.15 3555 91.7 92.4 92.4 0.78 0.84 0.86 58.4
50 37 324/6JM 146 G 6.0 2.4 2.3 5.98 15 33 498 --- 1.15 1775 92.4 93.0 93.0 0.67 0.78 0.83 60.2
364/5JM 219 G 6.2 2.0 2.1 20.7 20 44 770 --- 1.15 1185 92.4 93.0 93.0 0.76 0.84 0.86 58.1
324/6JM 87.4 F 5.9 1.8 2.0 3.41 17 37 490 --- 1.15 3555 92.4 93.0 93.0 0.78 0.84 0.86 70.6
60 45
364/5JM 175 G 6.1 1.8 2.3 12.8 22 48 723 --- 1.15 1777 93.0 93.6 93.6 0.73 0.82 0.85 71.0
364/5JM 109 F 5.8 1.6 2.1 5.60 26 57 703 --- 1.15 3555 91.0 92.4 93.0 0.80 0.85 0.87 85.3
75 55
364/5JM 219 G 6.3 1.8 2.3 15.2 19 42 774 --- 1.15 1775 93.6 94.1 94.1 0.75 0.83 0.86 85.3
100 75 364/5JM 146 F 5.7 1.7 2.3 6.80 15 33 756 --- 1.15 3550 92.4 93.0 93.0 0.80 0.85 0.88 115
Electrical Data
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
7.5 5.5 254JP 33.0 H 6.4 2.0 2.5 2.29 25 55 240 --- 1.15 1178 86.5 88.5 88.5 0.64 0.75 0.81 9.63
10 7.5 254/6JP 44.1 H 6.3 2.3 2.6 3.12 24 53 284 --- 1.15 1175 87.5 89.5 90.2 0.65 0.76 0.82 12.7
254JP 44.0 G 6.1 2.0 2.5 2.14 18 40 258 --- 1.15 1765 89.5 91.0 91.0 0.67 0.78 0.83 18.3
15 11
284JP 66.1 G 6.2 2.2 2.3 4.48 23 51 326 --- 1.15 1175 89.5 90.2 90.2 0.71 0.81 0.85 18.0
254JP 29.4 G 5.9 1.7 2.4 0.8718 16 35 238 --- 1.15 3530 89.5 90.2 90.2 0.77 0.85 0.86 24.3
20 15 254/6JP 58.9 G 5.8 2.3 2.7 2.63 13 29 293 --- 1.15 1760 90.2 91.0 91.0 0.70 0.80 0.84 24.6
284/6JP 88.2 G 5.8 2.5 2.3 5.45 17 37 366 --- 1.15 1175 90.2 91.0 91.0 0.71 0.81 0.84 24.6
254/6JP 36.7 G 6.1 1.9 2.6 0.9592 15 33 260 --- 1.15 3530 89.5 91.0 91.0 0.72 0.82 0.86 29.7
25 18.5 284JP 73.4 G 6.0 2.3 2.3 2.88 23 51 331 --- 1.15 1765 91.0 91.7 91.7 0.68 0.79 0.84 30.1
324JP 110 G 5.9 1.8 2.2 6.66 20 44 445 --- 1.15 1180 91.0 91.7 91.7 0.67 0.77 0.82 30.9
284JP 43.9 G 6.2 1.7 2.6 1.59 16 35 324 --- 1.15 3540 90.2 91.0 91.0 0.74 0.83 0.87 34.9
30 22 284/6JP 88.1 G 6.3 2.5 2.5 3.70 22 48 381 --- 1.15 1765 91.7 92.4 92.4 0.71 0.80 0.84 35.6
324/6JP 132 G 6.0 1.8 2.2 7.50 16 35 485 --- 1.15 1180 91.0 91.7 92.4 0.67 0.77 0.82 36.4
284/6JP 58.6 G 6.1 1.7 2.5 1.91 10 22 359 --- 1.15 3535 91.0 91.7 91.7 0.78 0.86 0.87 47.2
40 30 324JP 117 G 6.0 1.8 2.1 5.37 20 44 459 --- 1.15 1775 92.4 93.0 93.0 0.72 0.81 0.84 48.2
364/5JP 175 G 6.1 1.5 2.0 18.5 28 62 736 --- 1.15 1185 92.4 93.0 93.0 0.76 0.84 0.86 47.1
324JP 72.9 F 5.8 1.7 2.0 3.01 20 44 450 --- 1.15 3555 91.7 92.4 92.4 0.78 0.84 0.86 58.4
50 37 324/6JP 146 G 6.0 2.4 2.3 5.98 15 33 498 --- 1.15 1775 92.4 93.0 93.0 0.67 0.78 0.83 60.2
364/5JP 219 G 6.2 2.0 2.1 20.7 20 44 770 --- 1.15 1185 92.4 93.0 93.0 0.76 0.84 0.86 58.1
324/6JP 87.4 F 5.9 1.8 2.0 3.41 17 37 490 --- 1.15 3555 92.4 93.0 93.0 0.78 0.84 0.86 70.6
60 45 364/5JP 175 G 6.1 1.8 2.3 12.8 22 48 723 --- 1.15 1777 93.0 93.6 93.6 0.73 0.82 0.85 71.0
404/5JP 263 G 6.1 1.9 2.0 25.0 17 37 904 --- 1.15 1180 93.0 93.6 93.6 0.78 0.85 0.86 70.2
364/5JP 109 F 5.8 1.6 2.1 5.60 26 57 703 --- 1.15 3555 91.0 92.4 93.0 0.80 0.85 0.87 85.3
75 55 364/5JP 219 G 6.3 1.8 2.3 15.2 19 42 774 --- 1.15 1775 93.6 94.1 94.1 0.75 0.83 0.86 85.3
404/5JP 329 G 6.3 1.8 2.1 27.2 14 31 939 --- 1.15 1180 93.0 93.6 93.6 0.76 0.82 0.86 85.8
364/5JP 146 F 5.7 1.7 2.3 6.80 15 33 756 --- 1.15 3550 92.4 93.0 93.0 0.80 0.85 0.88 115
100 75
404/5JP 292 G 6.2 2.2 2.5 17.5 14 31 895 --- 1.15 1775 93.6 94.1 94.1 0.76 0.84 0.86 116
404/5JP 183 G 6.6 1.8 2.3 8.03 15 33 878 84.0 1.15 3545 93.0 93.6 93.6 0.80 0.86 0.88 137
125 90
404/5JP 365 G 6.5 2.1 2.3 21.5 12 26 983 --- 1.15 1775 94.1 94.5 94.5 0.76 0.84 0.86 139
150 110 404/5JP 219 G 6.6 1.7 2.2 9.20 11 24 931 --- 1.15 3550 93.0 93.6 93.6 0.84 0.89 0.90 164 Electrical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-45
Electrical Data
Metric Motors - Aluminum Frame
460 V
Inertia J (lb-ft2)
Allowable
Rotor Current
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output locked rotor % of full load
current In (A)
Locked
Rated speed
Frame
(ft.lb)
Code
ll/In
Full load
time (s)
(rpm)
Efficiency Power Factor
63 0.485 5.2 2.6 3 0.0104 53 117 11.0 44 1710 57.5 64.0 66.0 0.50 0.62 0.71 0.321
63 0.242 6.4 4.5 4.6 0.0033 37 81 11.0 52 3430 55.0 62.0 64.0 0.54 0.65 0.73 0.322
0.12 0.16
63 0.727 3.5 2.5 2.8 0.0157 56 123 14.3 43 1140 52.0 59.0 64.0 0.35 0.45 0.52 0.453
71 1.00 2.5 1.8 2.4 0.0223 50 110 22.1 41 825 46.0 52.5 59.5 0.30 0.37 0.46 0.550
63 0.760 5.7 2.8 3.3 0.0145 40 88 13.2 44 1705 62.0 66.0 69.5 0.50 0.60 0.69 0.471
63 0.379 6.3 4.4 4.4 0.0038 28 62 12.1 52 3415 57.5 64.0 68.0 0.54 0.66 0.74 0.449
0.18 0.25
80 1.56 3.8 2.4 2.9 0.0681 56 123 24.3 42 830 50.5 60.0 64.0 0.38 0.48 0.59 0.598
71 1.17 3.7 2.3 2.7 0.0221 50 110 20.9 43 1110 57.5 59.5 67.5 0.35 0.44 0.53 0.632
71 0.994 5.3 2.6 2.8 0.0157 40 88 14.3 43 1720 70.0 72.0 73.4 0.47 0.60 0.69 0.620
80 1.47 5.1 2.1 3.1 0.0686 25 55 26.5 47 1165 64.1 70.5 71.4 0.43 0.55 0.65 0.676
0.25 0.33
63 0.501 6.6 4.8 4.7 0.0047 23 51 13.2 56 3415 64.0 68.0 69.5 0.53 0.65 0.74 0.610
80 1.99 4.3 2.5 3 0.0802 30 66 26.5 42 860 67.5 68.0 68.5 0.37 0.48 0.57 0.804
71 1.51 5.8 3.4 3.5 0.0195 55 121 16.5 43 1710 70.0 75.0 78.2 0.47 0.58 0.67 0.886
71 0.753 7.0 3.1 3.3 0.0095 12 26 16.5 56 3440 70.0 73.4 73.4 0.64 0.76 0.82 0.772
0.37 0.5
90S/L 2.98 4.6 2.3 3.1 0.1305 30 66 35.3 43 870 66.5 71.5 72.0 0.37 0.47 0.56 1.15
80 2.27 4.9 2.4 2.8 0.0600 28 62 22.1 43 1140 66.0 70.0 75.3 0.47 0.60 0.70 0.881
90S 3.34 6.4 2.6 3.4 0.1303 35 77 41.9 49 1165 78.0 81.5 81.7 0.45 0.58 0.67 1.26
80 2.26 7.3 3.4 3.8 0.0605 22 48 22.1 44 1720 77.0 80.0 81.1 0.60 0.73 0.78 1.09
0.55 0.75
71 1.14 7.3 3.7 3.9 0.0112 17 37 15.4 56 3415 74.0 75.5 76.8 0.66 0.78 0.84 1.07
90S/L 4.52 4.5 2 2.5 0.1566 29 64 44.1 43 860 70.0 73.0 74.0 0.41 0.53 0.62 1.50
90S/L 2.94 8.6 2.8 3.9 0.1163 22 48 36.4 49 1760 80.0 84.5 85.0 0.52 0.66 0.75 1.48
90S/L 4.49 6.4 3 3.5 0.1561 36 79 48.5 49 1155 77.0 81.5 82.5 0.46 0.59 0.68 1.68
0.75 1
80 1.50 8.0 4.9 5 0.0180 32 70 25.4 59 3450 75.5 80.0 81.5 0.62 0.74 0.81 1.43
100L 6.02 4.8 2 2.7 0.3014 61 134 57.3 50 860 70.0 74.0 75.5 0.38 0.50 0.59 2.11
90S/L 4.43 8.5 2.9 3.5 0.1305 15 33 37.5 51 1755 80.0 84.0 86.5 0.57 0.70 0.78 2.05
1.1 1.5 80 2.25 8.0 5.3 5.2 0.0356 27 59 27.6 59 3450 78.5 81.5 84.0 0.62 0.74 0.81 2.03
100L 9.04 4.9 2.2 2.7 0.3393 42 92 62.8 50 860 74.0 75.5 78.5 0.38 0.50 0.59 2.98
90S/L 5.90 8.3 3 4 0.1566 14 31 43.0 49 1755 82.5 85.5 86.5 0.56 0.69 0.78 2.79
1.5 2 90S/L 2.97 8.4 4.1 4.4 0.0475 16 35 34.2 62 3485 80.0 82.5 85.5 0.64 0.75 0.82 2.69
112M 12.0 5.7 2.8 3.3 0.5648 38 84 79.4 46 865 77.0 80.0 84.0 0.44 0.57 0.64 3.50
100L 8.88 9.0 3.8 3.7 0.2136 20 44 59.5 --- 1750 86.6 88.2 89.5 0.54 0.67 0.75 4.11
132S 13.2 6.1 1.8 3.1 1.17 50 110 126 55 1175 84.0 87.5 89.5 0.49 0.62 0.70 4.41
2.2 3 112M 8.83 7.7 2.2 3.4 0.3393 33 73 79.4 56 1760 85.5 87.5 89.5 0.59 0.72 0.79 3.91
Electrical Data
90S/L 4.47 8.4 4.3 4.6 0.0617 14 31 44.1 62 3480 84.0 85.5 86.5 0.64 0.76 0.83 3.85
132S 17.9 7.4 2.5 2.9 1.64 32 70 139 48 870 82.0 84.0 85.5 0.47 0.60 0.68 4.75
132S 17.7 6.3 1.8 2.9 1.07 68 150 130 55 1170 85.5 88.5 89.5 0.49 0.62 0.70 6.01
132M 17.7 6.3 1.8 2.9 1.07 68 150 132 55 1170 85.5 88.5 89.5 0.49 0.62 0.70 6.01
3 4 100L 5.90 9.2 3.8 5 0.1519 18 40 60.6 67 3510 82.5 86.5 88.5 0.68 0.79 0.85 5.01
100L 11.9 8.6 4.6 4.8 0.2848 18 40 82.7 54 1740 84.0 86.5 89.5 0.59 0.71 0.79 5.33
132M 23.8 7.5 3.2 3.4 1.99 26 57 148 48 870 83.5 85.0 86.5 0.45 0.58 0.67 6.50
Inertia J (lb-ft2)
Allowable
Rotor Current
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output locked rotor % of full load
current In (A)
Locked
Rated speed
Frame
(ft.lb)
Code
ll/In
Full load
time (s)
(rpm)
Efficiency Power Factor
112M 16.2 8.0 2.5 3.5 0.4312 19 42 83.8 56 1755 87.5 89.5 89.5 0.58 0.70 0.77 7.28
4 5.5 132M 24.5 6.6 1.9 3 1.34 43 95 128 52 1165 85.5 88.5 89.5 0.50 0.63 0.71 7.90
112M 8.13 8.6 3.1 4.4 0.1898 24 53 79.4 64 3505 85.5 87.5 88.5 0.67 0.79 0.85 6.67
132S 22.0 10.1 2.6 4.3 1.25 18 40 139 56 1765 88.5 91.0 91.7 0.65 0.77 0.83 9.07
5.5 7.5
132S 11.0 8.6 2.9 4.1 0.5126 29 64 130 67 3530 85.5 87.5 89.5 0.70 0.81 0.86 8.97
132M 29.3 9.0 2.7 4.3 1.52 16 35 154 56 1770 90.2 91.0 91.7 0.65 0.77 0.83 12.2
7.5 10
132S 14.7 9.1 3.3 4.4 0.5980 21 46 139 67 3535 86.5 89.5 90.2 0.68 0.79 0.85 12.3
9.2 12.5 132M 18.3 9.0 3.1 3.9 0.7261 20 44 154 67 3535 88.5 90.2 91.0 0.73 0.83 0.87 14.6
Electrical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-47
Electrical Data
Metric Motors - Cast Iron Frame
460 V
Inertia J (lb-ft2)
Allowable
Rotor Current
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output locked rotor % of full load
current In (A)
Locked
Rated speed
Frame
(ft.lb)
Code
ll/In
Full load
time (s)
(rpm)
Efficiency Power Factor
63 0.242 6.4 4.5 4.6 0.0033 37 81 13.7 52 3430 55.0 62.0 64.0 0.54 0.65 0.73 0.322
63 0.485 5.2 2.6 3 0.0104 53 117 11.5 44 1710 57.5 64.0 66.0 0.50 0.62 0.71 0.321
0.12 0.16
63 0.727 3.5 2.5 2.8 0.0157 56 123 17.0 43 1140 52.0 59.0 64.0 0.35 0.45 0.52 0.453
71 1.00 2.5 1.8 2.4 0.0223 50 110 25.4 41 825 46.0 52.5 59.5 0.30 0.37 0.46 0.550
63 0.379 6.3 4.4 4.4 0.0038 28 62 14.8 52 3415 57.5 64.0 68.0 0.54 0.66 0.74 0.449
63 0.760 5.7 2.8 3.3 0.0145 40 88 15.9 44 1705 62.0 66.0 69.5 0.50 0.60 0.69 0.471
0.18 0.25
71 1.17 3.7 2.3 2.7 0.0221 50 110 25.4 43 1110 57.5 59.5 67.5 0.35 0.44 0.53 0.632
80 1.56 3.8 2.4 2.9 0.0681 56 123 29.8 42 830 50.5 60.0 64.0 0.38 0.48 0.59 0.598
63 0.501 6.6 4.8 4.7 0.0047 23 51 15.9 56 3415 64.0 68.0 69.5 0.53 0.65 0.74 0.610
71 0.994 5.3 2.6 2.8 0.0157 40 88 17.6 43 1720 70.0 72.0 73.4 0.47 0.60 0.69 0.620
0.25 0.33
80 1.47 5.1 2.1 3.1 0.0686 25 55 26.5 47 1165 64.1 70.5 71.4 0.43 0.55 0.65 0.676
80 1.99 4.3 2.5 3 0.0802 30 66 32.0 42 860 67.5 68.0 68.5 0.37 0.48 0.57 0.804
71 0.753 7.0 3.1 3.3 0.0095 12 26 16.5 56 3440 70.0 73.4 73.4 0.64 0.76 0.82 0.772
71 1.51 5.8 3.4 3.5 0.0195 55 121 20.9 43 1710 70.0 75.0 78.2 0.47 0.58 0.67 0.886
0.37 0.5
80 2.27 4.9 2.4 2.8 0.0600 28 62 27.6 43 1140 66.0 70.0 75.3 0.47 0.60 0.70 0.881
90S 2.98 4.6 2.3 3.1 0.1305 30 66 41.9 43 870 66.5 71.5 72.0 0.37 0.47 0.56 1.15
71 1.14 7.3 3.7 3.9 0.0112 17 37 18.7 56 3415 74.0 75.5 76.8 0.66 0.78 0.84 1.07
80 2.26 7.3 3.4 3.8 0.0605 22 48 27.6 44 1720 77.0 80.0 81.1 0.60 0.73 0.78 1.09
0.55 0.75
90S 3.34 6.4 2.6 3.4 0.1303 35 77 41.9 49 1165 78.0 81.5 81.7 0.45 0.58 0.67 1.26
90L 4.52 4.5 2 2.5 0.1566 29 64 50.7 43 860 70.0 73.0 74.0 0.41 0.53 0.62 1.50
80 1.50 8.0 4.9 5 0.0180 32 70 29.8 59 3450 75.5 80.0 81.5 0.62 0.74 0.81 1.43
90S 2.94 8.6 2.8 3.9 0.1163 22 48 40.8 49 1760 80.0 84.5 85.0 0.52 0.66 0.75 1.48
0.75 1
90L 4.49 6.4 3 3.5 0.1561 36 79 55.1 49 1155 77.0 81.5 82.5 0.46 0.59 0.68 1.68
100L 6.02 4.8 2 2.7 0.3014 61 134 67.3 50 860 70.0 74.0 75.5 0.38 0.50 0.59 2.11
80 2.25 8.0 5.3 5.2 0.0356 27 59 33.1 59 3450 78.5 81.5 84.0 0.62 0.74 0.81 2.03
1.1 1.5 90S 4.43 8.5 2.9 3.5 0.1305 15 33 43.0 51 1755 80.0 84.0 86.5 0.57 0.70 0.78 2.05
100L 9.04 4.9 2.2 2.7 0.3393 42 92 72.8 50 860 74.0 75.5 78.5 0.38 0.50 0.59 2.98
90S 2.97 8.4 4.1 4.4 0.0475 16 35 40.8 62 3485 80.0 82.5 85.5 0.64 0.75 0.82 2.69
1.5 2 90L 5.90 8.3 3 4 0.1566 14 31 50.7 49 1755 82.5 85.5 86.5 0.56 0.69 0.78 2.79
112M 12.0 5.7 2.8 3.3 0.5648 38 84 94.8 46 865 77.0 80.0 84.0 0.44 0.57 0.64 3.50
90L 4.47 8.4 4.3 4.6 0.0617 14 31 51.8 62 3480 84.0 85.5 86.5 0.64 0.76 0.83 3.85
100L 8.88 9.0 3.8 3.7 0.2136 20 44 72.8 --- 1750 86.6 88.2 89.5 0.54 0.67 0.75 4.11
2.2 3
132S 13.2 6.1 1.8 3.1 1.17 50 110 139 55 1175 84.0 87.5 89.5 0.49 0.62 0.70 4.41
Electrical Data
132S 17.9 7.4 2.5 2.9 1.64 32 70 152 48 870 82.0 84.0 85.5 0.47 0.60 0.68 4.75
100L 5.90 9.2 3.8 5 0.1519 18 40 70.6 67 3510 82.5 86.5 88.5 0.68 0.79 0.85 5.01
L100L 11.9 8.6 4.6 4.8 0.2848 18 40 82.7 54 1740 84.0 86.5 89.5 0.59 0.71 0.79 5.39
3 4
132S 17.7 6.3 1.8 2.9 1.07 68 150 135 55 1170 85.5 88.5 89.5 0.49 0.62 0.70 6.01
132M 23.8 7.5 3.2 3.4 1.99 26 57 165 48 870 83.5 85.0 86.5 0.45 0.58 0.67 6.50
Inertia J (lb-ft2)
Allowable
Rotor Current
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output locked rotor % of full load
current In (A)
Locked
Rated speed
Frame
(ft.lb)
Code
ll/In
Full load
time (s)
(rpm)
Efficiency Power Factor
112M 8.13 8.6 3.1 4.4 0.1898 24 53 90.4 64 3505 85.5 87.5 88.5 0.67 0.79 0.85 6.67
112M 16.2 8.0 2.5 3.5 0.4312 19 42 97.0 56 1755 87.5 89.5 89.5 0.58 0.70 0.77 7.28
4 5.5
132M 24.5 6.6 1.9 3 1.34 43 95 146 52 1165 85.5 88.5 89.5 0.50 0.63 0.71 7.90
160M 32.4 5.2 2 2.7 2.39 47 103 251 54 880 84.0 86.5 86.5 0.49 0.62 0.71 8.17
132S 11.0 8.6 2.9 4.1 0.5126 29 64 143 67 3530 85.5 87.5 89.5 0.70 0.81 0.86 8.97
132S 22.0 10.1 2.6 4.3 1.25 18 40 152 56 1765 88.5 91.0 91.7 0.65 0.77 0.83 9.07
5.5 7.5
132M/L 33.2 7.4 2.4 3.5 1.79 32 70 176 52 1170 85.5 88.5 91.0 0.48 0.61 0.70 10.8
160M 44.2 5.3 2 2.7 2.90 36 79 271 54 880 85.5 86.5 87.5 0.49 0.62 0.71 11.1
132S 14.7 9.1 3.3 4.4 0.5980 21 46 152 67 3535 86.5 89.5 90.2 0.68 0.79 0.85 12.3
132M 29.3 9.0 2.7 4.3 1.52 16 35 172 56 1770 90.2 91.0 91.7 0.65 0.77 0.83 12.2
7.5 10
160M 43.9 7.4 2.7 3.5 2.90 25 55 269 59 1180 87.5 89.5 91.0 0.59 0.69 0.75 13.8
160L 58.9 5.7 2.4 2.9 3.75 26 57 320 54 880 88.5 89.0 89.5 0.49 0.62 0.70 15.0
132M 18.3 9.0 3.1 3.9 0.7261 20 44 172 67 3535 88.5 90.2 91.0 0.73 0.83 0.87 14.6
160M 36.5 8.3 3 3.7 1.91 17 37 240 64 1775 87.5 90.2 92.4 0.66 0.77 0.82 15.2
9.2 12.5
160L 54.9 7.5 2.7 3.4 3.41 22 48 302 59 1180 88.5 90.2 91.7 0.60 0.73 0.80 15.7
180M 73.6 7.0 2.2 3 6.11 20 44 381 54 880 88.5 89.5 89.5 0.62 0.74 0.80 16.1
160M 21.9 8.7 3 4.3 0.9943 24 53 254 72 3555 88.5 91.0 91.7 0.69 0.80 0.84 17.9
160M 43.8 8.3 3.1 3.8 2.38 16 35 271 64 1775 89.5 91.7 92.4 0.63 0.75 0.82 18.2
11 15
160L 65.9 7.5 2.8 3.4 3.75 20 44 315 59 1180 88.5 90.2 91.7 0.61 0.73 0.80 18.8
180L 88.3 7.6 2.6 3.4 6.75 16 35 408 54 880 88.5 89.5 89.5 0.59 0.71 0.79 19.5
160M 29.2 8.4 3 4.1 1.12 18 40 262 72 3550 89.5 91.7 91.7 0.69 0.80 0.84 24.4
160L 58.4 8.3 3.3 4 2.88 13 29 320 64 1775 91.0 91.7 93.0 0.62 0.74 0.81 25.0
15 20
180L 87.8 9.2 3 3.9 7.69 13 29 426 59 1180 91.0 91.7 91.7 0.68 0.79 0.83 24.7
200L 117 5.2 2 2.4 10.8 44 97 518 56 885 89.5 91.0 91.0 0.55 0.67 0.74 28.0
160L 36.5 8.9 3.3 4.4 1.32 15 33 300 72 3550 90.2 91.7 92.4 0.69 0.80 0.84 29.9
180M 73.0 8.1 3.3 3.8 4.75 21 46 397 64 1775 91.0 92.4 93.6 0.62 0.75 0.81 30.6
18.5 25
200L 110 7.0 2.6 3.1 9.16 25 55 492 62 1180 91.0 91.7 93.0 0.62 0.74 0.81 30.8
225S/M 146 7.0 1.9 3.1 26.3 43 95 831 60 885 93.0 93.0 93.0 0.60 0.72 0.79 31.6
180M 43.7 8.5 2.8 4.1 2.83 17 37 388 72 3555 90.2 91.7 92.4 0.71 0.81 0.86 34.7
180L 87.6 8.6 3.5 3.9 5.39 19 42 437 64 1775 91.0 92.4 93.6 0.65 0.76 0.82 36.0
22 30
200L 132 7.2 2.8 3.3 10.8 23 51 529 62 1180 91.7 92.4 93.0 0.62 0.74 0.80 37.1
225S/M 176 6.6 1.5 2.4 30.6 38 84 886 60 885 92.4 92.5 92.8 0.59 0.71 0.79 37.7
200L 58.1 8.3 3 3.3 4.44 26 57 538 76 3565 91.0 92.4 93.0 0.73 0.82 0.86 47.1
Electrical Data
200L 116 8.2 3 3.6 8.23 19 42 536 66 1780 91.7 93.0 94.1 0.63 0.75 0.81 49.4
30 40
225S/M 175 7.7 2.7 3.3 30.6 30 66 884 66 1185 93.0 94.1 94.1 0.67 0.78 0.84 47.6
250S/M 233 6.6 2.2 2.6 33.9 40 88 1080 60 890 93.0 93.6 93.6 0.60 0.72 0.79 50.9
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-49
Electrical Data
Metric Motors Cast Iron Frame - continued
460 V
Inertia J (lb-ft2)
Allowable
Rotor Current
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output locked rotor % of full load
current In (A)
Locked
Rated speed
Frame
(ft.lb)
Code
ll/In
Full load
time (s)
(rpm)
Efficiency Power Factor
200L 72.5 8.3 3.3 3.3 5.03 22 48 584 76 3575 91.7 93.0 93.6 0.63 0.75 0.81 61.3
225S/M 146 8.6 3.1 3.7 20.9 25 55 864 67 1780 93.0 94.1 94.5 0.68 0.79 0.84 58.5
37 50
250S/M 219 7.8 2.8 3.3 33.8 29 64 1072 68 1185 93.6 94.1 94.1 0.69 0.79 0.84 58.8
280S/M 291 6.7 2 2.7 66.9 45 99 1484 63 890 93.0 94.1 94.1 0.59 0.71 0.77 64.1
225S/M 87.2 7.8 2.4 3.4 10.5 29 64 917 79 3565 93.0 94.1 94.1 0.80 0.87 0.90 66.7
225S/M 175 8.2 3.2 3.7 22.6 24 53 926 67 1780 93.6 94.5 95.0 0.69 0.79 0.85 69.9
45 60
280S/M 261 7.2 2.6 3.4 66.5 48 106 1495 69 1190 93.0 94.5 94.5 0.62 0.74 0.80 74.7
280S/M 349 6.4 1.9 2.6 82.8 42 92 1634 63 890 93.6 94.1 94.1 0.59 0.71 0.78 77.0
250S/M 109 8.6 2.9 3.7 11.6 28 62 1069 79 3570 93.6 94.2 94.2 0.80 0.87 0.90 81.4
250S/M 218 8.2 3.3 3.1 26.3 27 59 1118 68 1785 93.6 94.5 95.4 0.67 0.79 0.85 85.1
55 75
280S/M 327 7.0 2.6 3.3 77.1 46 101 1594 69 1190 93.6 94.5 94.5 0.64 0.75 0.81 90.2
315S/M 437 6.6 1.9 2.6 74.6 63 139 2064 66 890 93.6 94.5 94.5 0.62 0.73 0.78 93.7
280S/M 145 7.9 2.4 3.5 28.6 59 130 1603 81 3580 92.4 94.1 94.5 0.80 0.87 0.90 111
280S/M 290 7.9 2.7 3.4 53.5 47 103 1607 73 1785 93.0 94.5 95.4 0.72 0.81 0.85 116
75 100
315S/M 435 7.0 2.6 3.1 79.2 61 134 2121 70 1190 94.1 95.0 95.0 0.64 0.75 0.81 122
315S/M 582 6.5 2 2.6 95.7 60 132 2313 66 890 94.1 95.0 95.0 0.62 0.73 0.78 127
280S/M 181 7.7 2.3 3.3 31.8 52 114 1680 81 3580 93.0 94.5 95.0 0.82 0.88 0.90 132
280S/M 363 8.0 2.7 3.4 60.6 41 90 1713 73 1785 93.6 95.0 95.4 0.71 0.81 0.85 139
90 125
315S/M 544 7.0 2.6 3.1 94.8 61 134 2311 70 1190 94.5 95.4 95.4 0.64 0.75 0.81 146
315S/M 728 6.8 2.1 2.7 114 55 121 2534 66 890 93.5 94.0 94.5 0.61 0.73 0.78 153
315S/M 217 8.4 2.5 3.7 50.2 59 130 2121 81 3585 92.4 94.1 95.0 0.78 0.86 0.89 163
315S/M 434 7.8 3 3.2 58.7 57 125 2227 75 1790 93.6 95.0 95.8 0.71 0.81 0.85 170
110 150
315S/M 653 7.0 2.5 2.7 105 53 117 2439 70 1190 95.0 95.8 95.8 0.64 0.75 0.81 178
315L 873 6.7 2.1 2.7 298 49 108 3014 71 890 94.5 95.4 95.4 0.60 0.72 0.78 186
315S/M 253 8.2 2.5 3.4 60.7 54 119 2311 81 3580 93.6 94.5 95.4 0.82 0.88 0.90 193
315S/M 507 7.9 3.1 3.3 69.7 57 125 2414 75 1790 94.1 95.4 96.2 0.72 0.81 0.85 203
132 175
315S/M 762 7.2 2.9 3.2 121 46 101 2624 70 1190 95.0 95.8 95.8 0.63 0.75 0.81 214
315L 1013 6.9 2.3 2.7 313 47 103 3325 71 895 95.0 95.4 95.4 0.60 0.72 0.78 223
315S/M 289 8.5 2.6 3 65.7 46 101 2401 81 3585 93.6 95.4 95.4 0.79 0.87 0.90 219
150 200 315S/M 579 7.8 2.8 2.8 105 43 95 2478 75 1790 94.5 95.8 96.2 0.72 0.82 0.86 228
315L 871 7.3 2.8 3 264 41 90 3010 71 1190 95.4 95.8 95.8 0.66 0.77 0.82 240
315S/M 318 8.4 2.7 3.5 71.0 43 95 2489 81 3580 94.1 95.0 95.4 0.81 0.88 0.90 234
315S/M 637 7.8 3.2 3.2 76.9 49 108 2540 75 1790 94.5 95.4 96.2 0.72 0.82 0.85 246
160 220
Electrical Data
315L 958 7.4 3 3.2 264 45 99 3193 71 1190 95.4 95.8 95.8 0.64 0.76 0.81 259
355M/L 1274 7.0 1.2 2.8 410 83 183 3852 75 895 95.0 95.8 95.8 0.61 0.73 0.79 265
315S/M 362 8.3 2.9 3.4 76.0 42 92 2639 81 3580 94.5 95.4 95.8 0.82 0.88 0.90 269
315S/M 724 7.8 3.2 3.1 82.2 39 86 2695 75 1790 95.0 95.8 96.2 0.72 0.81 0.85 284
185 250
355M/L 1084 7.1 2.5 2.9 264 48 106 3674 77 1195 94.3 95.4 95.8 0.60 0.72 0.78 311
355M/L 1447 7.1 1.4 2.8 440 64 141 4011 75 895 95.0 95.8 95.8 0.61 0.73 0.78 311
Inertia J (lb-ft2)
Allowable
Rotor Current
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output locked rotor % of full load
current In (A)
Locked
Rated speed
Frame
(ft.lb)
Code
ll/In
Full load
time (s)
(rpm)
Efficiency Power Factor
315L 391 7.8 3 3.5 81.3 40 88 2878 82 3580 94.5 95.4 95.8 0.81 0.88 0.90 291
315L 781 7.8 3.1 3.1 93.4 40 88 2937 77 1790 95.0 95.8 96.2 0.72 0.82 0.85 307
200 270
355M/L 1171 6.9 2.4 2.8 286 58 128 3834 77 1195 94.2 95.4 95.8 0.62 0.73 0.79 332
355M/L 1563 6.8 1.2 2.7 449 70 154 4170 75 895 95.0 95.8 95.8 0.61 0.73 0.79 332
315L 434 7.9 2.7 3.2 88.3 44 97 3021 82 3580 95.4 95.8 96.2 0.84 0.89 0.91 315
220 300 315L 868 7.9 3.4 3.3 163 40 88 3153 77 1790 95.4 95.8 96.2 0.72 0.81 0.85 338
355M/L 1301 7.0 2.6 2.9 318 50 110 4088 77 1195 94.8 95.8 95.8 0.60 0.72 0.78 370
315L 492 7.8 2.8 3.2 98.9 34 75 3162 82 3580 95.4 96.2 96.2 0.84 0.90 0.91 358
250 340 315L 984 7.9 3.5 3.4 199 38 84 3367 77 1790 95.4 96.2 96.2 0.71 0.81 0.85 384
355M/L 1474 7.0 2.6 2.8 356 51 112 4344 77 1195 95.1 95.5 95.9 0.61 0.73 0.78 419
355M/L 506 7.9 2.4 3.3 120 54 119 3671 84 3585 94.5 95.8 96.2 0.86 0.90 0.91 373
260 350 315L 1013 7.9 3.5 3.4 199 38 84 3367 77 1790 95.4 96.2 96.2 0.71 0.81 0.85 384
355M/L 1517 7.0 2.6 2.8 356 51 112 4344 77 1195 95.1 95.5 95.9 0.61 0.73 0.78 436
355M/L 549 7.9 2.3 3 132 41 90 3861 84 3585 94.5 95.8 96.2 0.88 0.92 0.92 397
280 380 355M/L 1100 7.9 2.9 3.2 229 42 92 3737 78 1790 95.4 96.2 96.2 0.72 0.81 0.85 430
355M/L 1647 7.0 2.4 2.7 356 38 84 4344 77 1195 95.1 95.7 96.0 0.61 0.73 0.78 469
355M/L 621 7.9 2.5 3.1 142 45 99 4053 84 3585 95.4 96.2 96.2 0.88 0.92 0.92 447
315 430
355M/L 1245 8.1 3.1 3.5 254 41 90 3907 78 1790 95.4 96.2 96.5 0.65 0.77 0.83 494
355 480 355M/L 1389 7.8 2.7 2.9 275 37 81 4141 78 1790 95.8 96.2 96.5 0.74 0.83 0.85 543
Electrical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-51
Electrical Data
Super Premium Efficiency Motors
460 V
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
1 0.75 143/5T 1.49 J 7.2 2.5 3.0 0.0415 36 79 39.7 68.0 1.25 3485 81.5 82.5 84.0 0.69 0.79 0.83 1.35
1 0.75 L143T 2.94 L 9.0 2.6 3.3 0.1554 33 73 50.7 51.0 1.25 1760 84.0 86.5 87.5 0.59 0.70 0.79 1.33
1.5 1.1 143/5T 2.23 K 8.4 3.0 3.5 0.0470 29 64 41.9 68.0 1.25 3485 84.0 85.5 86.5 0.67 0.78 0.83 1.92
1.5 1.1 L143/5T 4.42 L 8.8 2.8 3.4 0.1815 20 44 55.1 51.0 1.25 1760 85.5 87.5 88.5 0.62 0.74 0.81 1.93
2 1.5 143/5T 2.97 K 8.2 3.2 3.6 0.0610 23 51 50.7 68.0 1.25 3490 85.5 87.5 87.5 0.69 0.80 0.84 2.56
2 1.5 L143/5T 5.89 L 8.6 2.9 3.6 0.1815 14 31 57.3 51.0 1.25 1760 86.5 87.5 88.5 0.61 0.74 0.81 2.63
3 2.2 182T 4.42 K 8.5 2.4 3.6 0.1920 50 110 88.2 69.0 1.25 3520 84.0 86.5 88.5 0.70 0.81 0.85 3.67
3 2.2 182/4T 8.81 K 8.3 2.3 3.2 0.4017 36 79 92.6 56.0 1.25 1765 87.5 88.5 91.0 0.63 0.75 0.81 3.75
3 2.2 213/5T 13.2 K 7.2 1.8 2.9 1.53 90 198 172 55.0 1.25 1175 87.5 89.5 90.2 0.51 0.63 0.71 4.31
5 3.7 182/4T 7.39 J 8.2 2.4 3.5 0.2233 30 66 94.8 69.0 1.25 3505 87.5 88.5 90.2 0.73 0.83 0.86 5.99
5 3.7 L182/4T 14.8 J 7.5 2.3 3.1 0.4877 20 44 101 56.0 1.25 1755 88.5 90.2 91.0 0.61 0.73 0.80 6.38
5 3.7 L213/5T 22.1 J 7.0 1.9 2.5 1.80 70 154 198 55.0 1.25 1170 89.5 91.0 91.0 0.56 0.68 0.75 6.80
7.5 5.5 213/5T 11.0 J 7.6 2.3 3.3 0.5548 37 81 141 72.0 1.25 3530 87.5 89.5 91.0 0.73 0.82 0.86 8.82
7.5 5.5 L213T 22.0 K 8.5 2.3 3.5 1.51 20 44 172 58.0 1.25 1770 91.0 92.4 93.0 0.65 0.76 0.83 8.94
7.5 5.5 254/6T 33.1 H 6.8 2.5 3.1 4.57 50 110 304 59.0 1.25 1175 90.2 91.7 92.4 0.60 0.72 0.79 9.46
10 7.5 213/5T 14.7 J 8.0 2.4 3.2 0.7185 34 75 172 72.0 1.25 3535 89.5 91.0 91.7 0.77 0.85 0.89 11.5
10 7.5 L213/5T 29.4 K 8.4 2.3 3.5 1.78 16 35 181 58.0 1.25 1765 91.7 92.4 93.0 0.66 0.78 0.84 12.0
10 7.5 254/6T 43.9 H 6.8 2.4 3.0 5.40 40 88 344 59.0 1.25 1180 91.0 92.4 92.4 0.62 0.74 0.80 12.7
15 11 254T 21.9 J 7.7 2.7 3.5 1.56 28 62 273 72.0 1.25 3545 90.2 91.7 92.4 0.72 0.82 0.86 17.4
15 11 254/6T 43.8 K 8.5 2.8 3.3 3.66 20 44 280 64.0 1.25 1775 91.7 93.0 93.6 0.66 0.76 0.83 17.8
15 11 284/6T 65.9 H 7.1 2.6 3.0 7.69 25 55 410 59.0 1.25 1180 91.7 92.4 93.0 0.65 0.76 0.82 18.1
20 15 254/6T 29.2 H 7.6 2.6 3.4 1.91 23 51 311 72.0 1.25 3545 91.0 92.4 93.0 0.75 0.84 0.88 23.0
20 15 254/6T 58.5 J 7.4 2.6 3.0 4.29 30 66 326 64.0 1.25 1770 93.0 93.6 94.1 0.63 0.75 0.81 24.7
20 15 284/6T 87.8 J 7.4 2.7 3.0 9.29 20 44 474 59.0 1.25 1180 91.7 92.4 93.0 0.67 0.78 0.83 24.4
25 18.5 284/6T 36.5 H 7.5 2.4 3.3 2.68 20 44 386 72.0 1.25 3550 91.7 93.0 93.6 0.75 0.83 0.87 28.5
25 18.5 284/6T 73.0 K 8.3 3.0 3.4 4.94 26 57 406 64.0 1.25 1775 93.0 94.1 94.5 0.62 0.74 0.81 30.3
25 18.5 324/6T 109 J 7.3 2.6 3.1 11.2 30 66 527 62.0 1.25 1185 92.4 93.6 94.1 0.61 0.73 0.80 30.8
30 22 284/6T 43.8 H 7.5 2.4 3.3 19 42 437 72.0 1.25 3550 92.4 93.6 93.6 0.76 0.84 0.88 33.5
30 22 284/6T 87.6 J 8.0 3.2 3.5 5.67 25 55 450 64.0 1.25 1775 93.0 94.1 94.5 0.64 0.76 0.82 35.6
30 22 324/6T 131 H 7.0 2.6 3.0 12.9 27 59 584 62.0 1.25 1185 92.4 93.6 94.1 0.60 0.73 0.80 36.7
40 30 324/6TS 58.1 H 7.5 2.8 3.0 4.63 27 59 547 76.0 1.25 3565 92.4 94.1 94.1 0.74 0.83 0.86 46.5
40 30 324/6T 116 K 8.4 3.2 3.5 8.83 22 48 534 66.0 1.25 1780 93.6 94.5 95.0 0.64 0.75 0.81 48.9
40 30 364/5T 174 K 8.4 2.6 3.2 24.2 22 48 875 66.0 1.25 1190 93.6 94.5 95.0 0.64 0.76 0.81 48.9
Electrical Data
50 37 324/6T 72.6 H 7.7 3.0 3.0 5.43 25 55 606 76.0 1.25 3570 93.0 94.5 94.5 0.74 0.83 0.86 57.1
50 37 324/6T 146 H 7.4 2.6 3.0 9.82 20 44 598 66.0 1.25 1780 94.1 95.0 95.4 0.62 0.73 0.81 60.1
50 37 364/5T 218 K 8.5 2.6 3.3 25.0 12 26 895 66.0 1.25 1190 93.6 94.5 95.0 0.63 0.75 0.81 60.3
60 45 364/5TS 87.1 H 7.9 2.4 3.2 8.61 25 55 926 79.0 1.25 3570 93.0 94.5 95.0 0.79 0.86 0.89 66.8
60 45 364/5T 175 J 8.5 2.7 3.2 16.9 24 53 897 67.0 1.25 1780 94.5 95.4 95.8 0.69 0.80 0.84 70.2
60 45 404/5T 262 J 7.9 2.8 3.2 39.1 22 48 1111 68.0 1.25 1185 94.1 95.0 95.4 0.65 0.77 0.82 72.2
Inertia J (lb-ft2)
Service Factor
Locked Allowable
Locked Rotor
Torque Tb/Tn
Sound dB(A)
Torque Tl/Tn
Break-down
Weight (lb)
Output Rotor locked rotor % of full load
current In (A)
Rated speed
Frame
(ft.lb)
Full load
Current time (s)
(rpm)
Efficiency Power Factor
75 55 364/5TS 109 H 8.0 2.6 3.2 8.61 14 31 937 79.0 1.25 3570 93.6 95.0 95.0 0.77 0.85 0.88 82.6
75 55 364/5T 218 J 8.4 2.8 3.2 16.9 16 35 919 67.0 1.25 1780 94.5 95.4 95.8 0.68 0.78 0.83 86.8
75 55 404/5T 327 J 8.0 2.8 3.0 41.3 15 33 1125 68.0 1.25 1190 94.1 95.0 95.4 0.64 0.75 0.81 89.3
100 75 404/5TS 145 H 8.0 2.9 3.2 14.3 20 44 1180 79.0 1.25 3565 94.5 95.4 95.4 0.81 0.87 0.89 111
100 75 404/5T 291 K 8.8 2.7 3.1 28.7 12 26 1188 68.0 1.25 1780 95.4 95.8 96.2 0.70 0.80 0.84 116
100 75 444/5T 435 J 7.6 2.6 3.2 106 27 59 1896 69.0 1.25 1190 94.5 95.4 95.8 0.60 0.72 0.79 124
125 90 444/5TS 181 J 8.2 2.3 3.1 31.3 44 97 1680 81.0 1.25 3580 94.1 95.4 95.8 0.76 0.84 0.87 136
125 90 444/5T 363 J 8.2 2.4 3.0 58.4 38 84 1722 73.0 1.25 1785 95.0 95.8 96.2 0.68 0.79 0.84 140
125 93 444/5T 544 J 7.6 2.4 2.6 114 25 55 1945 69.0 1.25 1190 95.0 95.8 95.8 0.62 0.74 0.80 152
150 110 444/5TS 217 H 7.9 2.6 3.2 38.5 30 66 1863 81.0 1.25 3580 94.5 95.8 96.2 0.77 0.85 0.88 163
150 110 444/5T 435 K 8.9 2.5 3.0 73.0 30 66 1951 73.0 1.25 1785 95.4 96.2 96.5 0.68 0.79 0.84 170
150 110 447/9T 653 J 7.5 2.6 3.2 145 22 48 2256 70.0 1.25 1190 95.0 95.8 96.2 0.62 0.74 0.80 179
200 150 445/7TS 290 H 7.3 2.4 2.9 41.6 28 62 2029 81.0 1.25 3575 95.4 96.2 96.2 0.83 0.88 0.90 217
200 150 447/9T 580 J 7.7 2.8 3.0 98.7 24 53 2293 75.0 1.25 1785 95.8 96.5 96.8 0.66 0.77 0.83 234
200 150 447/9T 871 J 7.5 2.6 3.0 156 15 33 2326 70.0 1.25 1190 95.4 95.8 96.2 0.60 0.72 0.80 245
250 185 445/7TS 362 H 7.9 2.2 3.0 46.7 23 51 2183 81.0 1.25 3575 95.8 96.5 96.5 0.82 0.88 0.90 267
250 185 447/9T 726 H 7.5 2.7 2.9 104 21 46 2536 75.0 1.25 1785 96.2 96.5 96.8 0.68 0.78 0.84 286
250 185 586/7T 1088 G 6.4 2.1 2.1 226 50 110 3638 77.0 1.25 1190 95.0 95.9 96.3 0.67 0.77 0.81 298
Electrical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-53
Mechanical Data
Single Phase - General Purpose - TEFC - Cast Iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-56
Single Phase - General Purpose - TEFC - Cast Iron - C-Face . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-58
Single Phase - General Purpose - TEFC - Rolled Steel - Standard Efficiency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-60
Single Phase - General Purpose - TEFC - Rolled Steel - Standard Efficiency - C-Face . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-62
Single Phase - General Purpose - ODP - Rolled Steel - Standard Efficiency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-64
Single Phase - General Purpose - ODP - Rolled Steel - Standard Efficiency - C-Face . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-66
Single Phase - General Purpose - ODP - Rolled Steel - Premium Efficiency. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-68
Single Phase - General Purpose - ODP - Rolled Steel - Premium Efficiency - C-Face . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-70
TEFC – W22 NEMA Premium® Efficiency. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-72
C & D Flanges Dimensions – Valid for Cast Iron TEFC and ODP - C-Flange additional detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-74
D-Flange additional detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-74
Rolled Steel - General Purpose - Three Phase - TEFC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-75
Rolled Steel - General Purpose - Three Phase - ODP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-77
ODP – Cast Iron - Three Phase - General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-78
Explosion Proof - Three Phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-81
Fractional - Three Phase - TEFC - NEMA Premium® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-83
Fractional - Three Phase - TEFC - NEMA Premium® - C-Face . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-84
Fractional - Three Phase - TEFC - Standard Efficiency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-85
Fractional - Three Phase - TEFC - Standard Efficiency - C-Face . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-86
Fractional - Three Phase - ODP - Premium Efficiency. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-87
Fractional - Three Phase - ODP - Premium Efficiency - C-Face. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-88
Fractional - Three Phase - ODP - Standard Efficiency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-89
Fractional - Three Phase - ODP - Standard Efficiency - C-Face . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-90
Cooling Tower Motors - Three Phase - TEFC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-91
Cooling Tower Motors - Three Phase - TEAO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-95
CCP - JM - Three Phase - TEFC - Rolled Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-98
CCP - JM - Three Phase - TEFC - Cast Iron. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-100
CCP - JP - Three Phase - TEFC - Rolled Steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-103
CCP - JP - Three Phase - TEFC - Cast Iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-105
CCP - JM - Three Phase - ODP - Rolled Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-108
CCP - JP - Three Phase - ODP - Rolled Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-108
CCP - JP and JM - Three Phase - ODP - Cast Iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-111
IEC Metric Motors - Cast Iron Frames. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-113
IEC Metric Motors - Cast Iron Frames - Additional C-Flange Detail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-115
IEC Metric Motors - Cast Iron Frames - Additional F-Flange Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-116
Mechanical Data
NOTES:
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-55
Mechanical Data
Single Phase - General Purpose - TEFC - Cast Iron
Frame 2E J A P AB 2F B EV BA U N-W Key Length
143/5T 5.5 1.457 6.457 7.244 7.126 4 6.142 0.571 2.25 0.875 2.25 1.575
182/4T 7.5 1.614 8.661 8.937 8.11 4.5 6.969 0.734 2.75 1.125 2.75 1.969
213/5T 8.5 1.791 9.764 10.787 9.212 5.5 8.858 0.929 3.5 1.375 3.375 2.48
Frames 143/5
Mechanical Data
Frames 182/4
Frame 213/5
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-57
Mechanical Data
Single Phase - General Purpose - TEFC - Cast Iron - C-Face
Frame Type Flange Size BC AJ AK BD S T AH Angle BF Number
143/5T C C FC-149 0.125 5.875 4.5 6.5 UNC 3/8”x16 0.157 2.125 45° 4
182/4T C C FC-184 0.125 7.25 8.5 8.875 UNC 1/2”x13 0.25 2.625 45° 4
213/5T C C FC-184 0.25 7.25 8.5 8.875 UNC 1/2”x13 0.25 3.125 45° 4
Frames 143/5
Mechanical Data
Frames 182/4
Frame 213/5
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-59
Mechanical Data
Single Phase - General Purpose - TEFC - Rolled Steel - Standard Efficiency
Frame 2E J A P AH 2F B BA CH U N-W Key Length
48 4.236 1.835 6.142 6.693 1.689 2.748 3.543 2.5 1.417 0.5 1.5 1.26
W56 4.874 1.62 6.535 6.693 2.063 3 4.016 2.75 1.417 0.625 1.874 1.417
56 4.874 1.732 6.535 7.638 2.062 3 4.016 2.75 1.377 0.625 1.874 1.417
56H 4.874 1.732 6.535 7.638 2.062 3.000/5.000 6.496 2.75 1.377 0.625 1.874 1.417
143/5T 5.5 1.732 6.535 7.638 2.132 4.000/5.000 6.496 2.25 1.377 0.875 2.25 1.417
182/4T 7.5 1.299 8.661 9.435 2.62 4.500/5.500 6.299 2.75 1.377 1.125 2.75 1.969
213/5T 8.5 1.575 9.449 10.965 3.129 5.500/7.000 7.953 3.5 1.929 1.375 3.38 2.48
Frame 48
Frame W56
Mechanical Data
Frame 182/4T
Frame 213/5T
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-61
Mechanical Data
Single Phase - General Purpose - TEFC - Rolled Steel - Standard Efficiency - C-Face
Frame Type Flange Size AJ AK BD S T AH Angle BB BF Number
W56 C C FC-149 5.874 4.5 6.47 UNC 3/8”x16-2B 0.157 2.063 45° 0.157 4
48 C C FC-95 3.748 3 4.74 UNC 1/4”x20-2B 0.157 1.689 45° 0.157 4
56 C C FC-149 5.874 4.5 6.45 UNC 3/8”x16-2B 0.157 2.062 45° 0.157 4
143/5T C C FC-149 5.874 4.5 6.45 UNC 3/8”x16 0.157 2.132 45° 0.157 4
56H C C FC-149 5.874 4.5 6.45 UNC 3/8”x16-2B 0.157 2.062 45° 0.157 4
182/4T C C FC-184 7.25 8.5 8.846 UNC 1/2”x13 0.25 2.62 45° 0.25 4
213/5T C C FC-184 7.25 8.5 9.401 UNC 1/2”x13 0.25 3.129 45° 0.25 4
Frame W56
Frame 48
Frame 56
Mechanical Data
Frame 182/4T
Frame 213/5T
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-63
Mechanical Data
Single Phase - General Purpose - ODP - Rolled Steel - Standard Efficiency
Key
Frame 2E J A P AB AH 2F B BA CH U N-W R
Length
48 4.236 1.835 6.142 5.709 5.52 1.689 2.748 3.543 2.5 1.22 0.5 1.5 1.26 0.451
W56 4.874 1.62 6.535 5.709 5.52 2.063 3 4.016 2.75 1.22 0.625 1.874 1.417 0.517
56 4.874 1.732 6.535 6.456 3.323 2.062 3 4.016 2.75 1.377 0.625 1.874 1.417 0.517
56H 4.874 1.732 6.535 6.456 5.882 2.062 3.000/5.000 6.496 2.75 1.377 0.625 1.874 1.417 0.517
143/5T 5.5 1.732 6.535 6.467 5.882 2.132 4.000/5.000 6.496 2.25 1.377 0.875 2.25 1.417 0.771
182/4T 7.5 1.299 8.661 8.114 6.696 2.62 4.500/5.500 6.299 2.75 1.377 1.125 2.75 1.969 0.984
213/5T 8.5 1.575 9.449 9.846 7.973 3.129 5.500/7.000 7.953 3.5 1.929 1.375 3.38 2.48 1.203
Frame W56
Frame 56
Mechanical Data
Frame 56H
Frame 143/5T
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-65
Mechanical Data
Single Phase - General Purpose - ODP - Rolled Steel - Standard Efficiency - C-Face
Frame Type Flange Size AJ AK BD S T AH Angle BF Number
W56 C C FC-149 5.874 4.5 6.47 UNC 3/8”x16-2B 0.157 2.063 45° 4
48 C C FC-95 3.748 3 4.74 UNC 1/4”x20-2B 0.157 1.689 45° 4
56 C C FC-149 5.874 4.5 6.45 UNC 3/8”x16-2B 0.157 2.062 45° 4
143/5T C C FC-149 5.874 4.5 6.45 UNC 3/8”x16 0.157 2.132 45° 4
56H C C FC-149 5.874 4.5 6.45 UNC 3/8”x16-2B 0.157 2.062 45° 4
182/4T C C FC-184 7.25 8.5 8.846 UNC 1/2”x13 0.25 2.62 45° 4
213/5T C C FC-184 7.25 8.5 9.401 UNC 1/2”x13 0.25 3.129 45° 4
Frame 48
Frame W56
Frame 56
Mechanical Data
Frame 56H
Frame 143/5T
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-67
Mechanical Data
Single Phase - General Purpose - ODP - Rolled Steel - Premium Efficiency
Key
Frame 2E J A P AB AH 2F B BA CH U N-W R Depth
Length
48 4.236 1.835 6.142 5.709 5.52 1.689 2.748 3.543 2.5 1.22 0.5 1.5 1.26 0.451
W56 4.874 1.62 6.535 5.709 5.52 2.063 3 4.016 2.75 1.22 0.625 1.874 1.417 0.517 0.187
56 4.874 1.732 6.535 6.456 3.323 2.062 3 4.016 2.75 1.377 0.625 1.874 1.417 0.517 0.187
56H 4.874 1.732 6.535 6.456 5.882 2.062 3.000/5.000 6.496 2.75 1.377 0.625 1.874 1.417 0.517 0.187
143/5T 5.5 1.732 6.535 6.467 5.882 2.132 4.000/5.000 6.496 2.25 1.377 0.875 2.25 1.417 0.771 0.187
Frame 48
Frame W56
Mechanical Data
Frame 56
Frame 56H
Frame 143/5T
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-69
Mechanical Data
Single Phase - General Purpose - ODP - Rolled Steel - Premium Efficiency - C-Face
Frame Type Flange Size BB AJ AK BD S T AH Angle BF Number
W56 C C FC-149 0.157 5.874 4.5 6.47 UNC 3/8”x16-2B 0.157 2.063 45° 4
48 C C FC-95 0.157 3.748 3 4.74 UNC 1/4”x20-2B 0.157 1.689 45° 4
56 C C FC-149 0.157 5.874 4.5 6.45 UNC 3/8”x16-2B 0.157 2.062 45° 4
143/5T C C FC-149 0.157 5.874 4.5 6.45 UNC 3/8”x16 0.157 2.132 45° 4
56H C C FC-149 0.157 5.874 4.5 6.45 UNC 3/8”x16-2B 0.157 2.062 45° 4
Frame W56
Frame 48
Mechanical Data
Frame 143/5T
Frame 56H
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-71
Mechanical Data
TEFC – W22 NEMA Premium® Efficiency
Mounting Keyway Shaft Extension
Frame A B C D G J O K P T
2E 2F H BA S R ES N-W U
143T 12.346
4.000 5.157
L143T 13.566
5.500 0.344 2.250 6.457 3.500 0.354 1.437 7.122 7.047 - 0.187 0.765 1.575 2.250 0.875
145T 13.346
5.000 6.142
L145T 14.566
182T 14.860
4.500 5.945
L182T 16.041
7.500 2.750 8.661 4.500 0.394 1.594 9.343 - 8.740 0.250 0.984 1.969 2.750 1.125
184T 15.860
5.500 6.969
L184T 17.041
0.406 1.772
213T 18.021
5.500 7.362
L213T 19.527
8.500 3.500 9.764 5.250 1.988 10.841 10.669 0.313 1.203 2.480 3.375 1.375
215T 19.517
7.000 8.858 0.827
L215T 20.905
254T 8.252 10.000 23.213
10.000 4.250 12.126 6.250 2.539 12.598 2.559 12.953 2.756 4.000
256T 10.000 11.732 24.945 0.375 1.406 1.625
284TS 0.531 25.061 2.087 2.480 3.250
9.500 11.575
284T 26.433 0.500 1.594 3.149 4.622 1.875
11.000 4.750 13.780 7.000 1.023 3.110 14.067 2.874 14.173
286TS 26.557 0.375 1.406 2.480 3.250 1.625
11.000
286T 27.929 3.149 4.622
13.071 1.594 1.875
324TS 28.120 2.756 3.750
10.500
324T 29.620 1.844 3.937 5.250 2.125
12.500 0.657 5.250 15.157 8.000 1.300 3.189 15.953 3.189 15.827 2.441 0.500
326TS 29.616 1.594 2.756 3.750 1.875
12.000 14.567
326T 31.116 1.844 3.937 5.250 2.125
364/5TS 32.276 1.591 1.968 3.748 1.875
14.016 11.260/12.244 0.660 5.875 17.165 16.220 9.000 1.480 3.150 17.957 4.921 17.914
364/5T 34.251 0.625 2.019 4.330 5.874 2.375
404/5TS 36.732 0.500 1.842 2.756 4.250 2.125
15.984 12.244/13.740 6.625 19.921 18.386 10.000 1.811 19.566 5.669 19.134
404/5T 39.730 0.750 2.449 5.512 7.250 2.875
444/5TS 41.200 0.625 2.021 3.000 4.750 2.375
14.500/16.500 20.315 1.630 3.937
444/5T 44.950 0.875 2.880 7.087 8.500 3.375
5.866
445/7TS 44.951 0.625 2.021 3.000 4.750 2.375
16.500/20.000 0.810 23.897 1.654 22.795 23.583
445/7T 48.701 0.875 2.880 7.087 8.500 3.375
18.000 7.500 21.929 11.000
447/9TS 52.588 0.625 2.021 3.000 4.750 2.375
20.000/25.000 4.331 6.692 -
447/9T 56.338 0.875 2.880 7.087 8.500 3.375
31.535 1.630
L447/9TS 53.431 0.625 2.021 3.000 4.750 2.375
20.000/25.000 3.937 23.874 8.780
L447/9T 57.181 0.875 2.880 7.087 8.500 3.375
25.866
504/5TS 48.215 0.625 2.021 3.000 4.750 2.375
20.000 16.000/18.000 1.250 8.500 24.724 24.449 12.500 2.146 4.724 25.425 7.228
504/5T 54.095 0.875 3.134 8.661 10.630 3.625
586/7TS 55.027 0.625 2.021 3.000 4.750 2.375
22.000/25.000 29.921 9.055
586/7T 61.902 1.000 3.312 8.661 11.625 3.875
23.000 1.181 10.000 29.528 14.500 2.492 5.512 28.985 28.977
588/9TS 62.506 0.625 2.021 3.000 4.750 2.375
28.000/32.000 37.980 13.030
588/9T 69.381 1.000 3.312 8.661 11.625 3.875
23.071 15.078 27.401 25.889 27.007 11.500 8.464 15.906 17.244 2xNPT 3”
L447/9T 6322 C3 6319 C3
504/5TS 6314 C3 6314 C3
20.670 15.275 30.305 24.291 29.409 10.394 6.968 14.646 15.040
504/5T 6319 C3 6316 C3
586/7TS 6314 C3 6314 C3
23.977 18.149 35.354 27.559 30.801 8.464 15.906 17.244
586/7T UNC 7/8”-9 6322 C3 6319 C3
588/9TS 13.386 UNC 3/4”-10 6314 C3 6314 C3
12.519 (side mounted)/
27.600 6.063 35.346 26.182 33.346 17.441 28.740
588/9T 13.977(top mounted) UNC 7/8”-9 6322 C3 6319 C3
Note:
182T and 184T motors are not available in F-3 mounting.
Frame 588/9T
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-73
Mechanical Data
C & D Flanges Dimensions – Valid for Cast Iron TEFC and ODP - C-Flange additional detail
BF (holes)
Frame Type Size AJ AK AH BA BB BC BD
Quantity Thread
143/5 C FC-140 5.875 4.500 2.125 2.250 0.157 6.500 UNC 3/8”x16
182/4 C 2.625 2.750
0.125
213/5 C FC-184 7.250 8.500 3.125 3.500 8.875
254/6 C 3.750 4.250 UNC 1/2”x13
4
284/6T C 4.375
FC-228 9.000 10.500 4.750 11.030
284/6TS C 3.000
324/6T C 5.000
5.250 13.580
324/6TS C 3.500
364/5T C 5.625
FC-279 11.000 12.500 5.875
364/5TS C 3.500
15.550
404/5T C 7.000
6.625
404/5TS C 4.000
444/5T C 8.250 0.250
444/5TS C 4.500
0.250
445/7T C 8.250
FC-355 14.000 16.000 7.500 UNC 5/8”x11
445/7TS C 4.500
8
447/9T C 8.250
447/9TS C 4.500
17.910
504/5T C 10.375
8.500
504/5TS C 4.500
586/7T C 11.375
FC-368 14.500 16.500
586/7TS C 4.500
10.000
588/9T C 11.375
588/9TS C 4.500
445/7TS D
447/9T D
8
447/9TS D
504/5T D
FD-558 22.000 8.500 24.800
504/5TS D
586/7T D
0.250
586/7TS D
FD-762 30.000 30.000 10.000 32.000
588/9T D
588/9TS D
Frames 143
Frames 182
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-75
Mechanical Data
Rolled Steel - General Purpose - Three Phase - TEFC - continued
Dimensions for C-Face motors
Frame Size AJ AK BD BF BB AH Angle BF Number
143/5T FC-149 5.874 4.500 6.449 UNC 3/8”x16 0.157 2.132 45° 4
182/4T FC-184 7.250 8.500 8.846 UNC 1/2”x13 0.250 2.620 45° 4
213/5T FC-184 7.250 8.500 9.401 UNC 1/2”x13 0.250 3.129 45° 4
254/6T FC-184 7.250 8.500 11.084 UNC 1/2”x13 0.250 3.750 45° 4
Frames 143
Frames 182
Frames 143
Frames 182
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-77
Mechanical Data
ODP – Cast Iron - Three Phase - General Purpose
NEMA MOUNTING C WITH DRIP
A B C CH D G J
FRAMES 2E 2F H BA COVER
254T 8.250 9.507 20.537 22.368 1.526
10.000 8.250 4.250 11.496 1.831 6.250 0.630
254/6T 11.200 22.285 24.116 1.485
10.000
284T 23.158 25.028
9.500 11.032
284TS 0.530 21.783 23.653
9.500
284/6T 11.000 4.750 13.780 24.658 26.529 1.870 7.000 0.787 2.496
11.000
12.529
9.500
284/6TS 23.283 25.154
11.000
324T 25.807 27.677
10.500 12.176
324TS 24.307 27.177
10.500
324/6T 12.500 5.250 15.157 27.307 29.177 1.870 8.000 0.974 2.802
12.000
13.554
10.500
324/6TS 0.660 25.807 27.677
12.000
11.250
364/5T 29.725 32.186
12.250
14.000 5.875 17.165 15.323 2.461 9.000 1.181 3.524
11.250
364/5TS 27.600 30.061
12.250
12.250
404/5T 34.100 36.482
13.750
16.000 6.625 19.921 17.866 2.382 10.000 1.181 3.937
12.250
404/5TS 31.100 33.482
13.750
0.810
14.500
444/5T 38.108 41.199
16.500
18.000 7.500 21.260 19.737 3.091 11.000 1.181 2.944
14.500
444/5TS 34.358 37.449
16.500
324/6T 15.669 15.895 17.669 0.500 1.845 3.937 5.250 2.125 13.394 3.658 NPT2” 6312-Z-C3
4.359 15.492 2.265 11.250
324/6TS 1.591 2.756 3.750 1.875
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-79
Mechanical Data
TERMINAL BOX
FRAME
LL LM
254/6 7.813 7.494
284/6 8.571 8.993
324/6 8.993 9.921
364/5
10.591 11.262
Mechanical Data
404/5
444/5 14.940 15.063
Frame 2E 2F A AA AB B BA C D G Hole H J
284T 26.407
9.500 NPT 1 1/2" 11.575 0.531
284TS 25.033
11.000 13.780 11.850 4.750 7.000 1.024 3.150
286T 27.905
11.000
286TS 26.531
13.071
324T 29.602
10.500
324TS 28.102
12.500 15.157 NPT 2" 12.961 5.250 8.000 1.307 3.228
326T 31.106
12.000 14.567 0.657
326TS 29.606
364/5T 33.701
14.000 11.250/12.250 17.165 15.394 5.875 9.000 1.480 3.150
364/5TS 31.575
NPT 3" 16.654
404/5T 38.074
16.000 12.250/13.752 19.921 17.520 6.625 10.000 1.812
404/5TS 35.074
444/5T 43.797
14.500/16.500 21.732 20.079
444/5TS 40.047
0.807 3.937
447T 47.339
18.000 20.000 21.929 23.640 7.500 11.000 1.630
447TS 43.589
20.984
449T 54.996
25.000 2xNPT 3" 32.126
449TS 51.246
504/5T 49.445
20.000 16.000/18.000 24.724 21.850 21.969 8.500 12.500 2.146 1.250 4.724
504/5TS 46.875
586/7T 61.389
23.000 22.000/25.000 29.528 25.787 29.921 10.00 14.500 2.492 1.181 5.236
586/7TS 54.514
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-81
Mechanical Data
TEFC – Explosion Proof continued
Frames 143T to 586/7TS
Frame 48
Frame W56
Frame 56 - 56H
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-83
Mechanical Data
Fractional - Three Phase - TEFC - NEMA Premium® - C-Face
Frame Type Flange Size AJ AK BD S T AH Angle BF Number
W56 C C FC-149 5.874 4.5 6.47 UNC 3/8”x16-2B 0.157 2.063 45° 4
48 C C FC-95 3.748 3 4.74 UNC 1/4”x20-2B 0.157 1.689 45° 4
56 C C FC-149 5.874 4.5 6.45 UNC 3/8”x16-2B 0.157 2.062 45° 4
56H C C FC-149 5.874 4.5 6.45 UNC 3/8”x16-2B 0.157 2.062 45° 4
Frame W56
Frame 48
Frame 56/56H
Mechanical Data
Frame 48
Frame W56
Frame 56 - 56H
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-85
Mechanical Data
Fractional - Three Phase - TEFC - Standard Efficiency - C-Face
Frame Type Flange Size BB AJ AK BD S T AH Angle BF Number
W56 C C FC-149 0.157 5.874 4.5 6.47 UNC 3/8”x16-2B 0.157 2.063 45° 4
48 C C FC-95 0.157 3.748 3 4.74 UNC 1/4”x20-2B 0.157 1.689 45° 4
56 C C FC-149 0.157 5.874 4.5 6.45 UNC 3/8”x16-2B 0.157 2.062 45° 4
56H C C FC-149 0.157 5.874 4.5 6.45 UNC 3/8”x16-2B 0.157 2.062 45° 4
Frame W56
Frame 48
Frame 56/56H
Mechanical Data
Frame 48
Frame W56
Frame 56 - 56H
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-87
Mechanical Data
Fractional - Three Phase - ODP - Premium Efficiency - C-Face
Frame Type Flange Size AJ AK BD S T AH Angle BF Number
W56 C C FC-149 5.874 4.5 6.47 UNC 3/8”x16-2B 0.157 2.063 45° 4
48 C C FC-95 3.748 3 4.74 UNC 1/4”x20-2B 0.157 1.689 45° 4
56 C C FC-149 5.874 4.5 6.45 UNC 3/8”x16-2B 0.157 2.062 45° 4
56H C C FC-149 5.874 4.5 6.45 UNC 3/8”x16-2B 0.157 2.062 45° 4
Frame 48
Frame W56
Frame 56 - 56H
Mechanical Data
Frame 48
Frame W56
Frame 56 - 56H
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-89
Mechanical Data
Fractional - Three Phase - ODP - Standard Efficiency - C-Face
Frame Type Flange Size AJ AK BD BB S T AH Angle BF Number
W56 C C FC-149 5.874 4.5 6.47 0.157 UNC 3/8”x16-2B 0.157 2.063 45° 4
48 C C FC-95 3.748 3 4.74 0.157 UNC 1/4”x20-2B 0.157 1.689 45° 4
56 C C FC-149 5.874 4.5 6.45 0.157 UNC 3/8”x16-2B 0.157 2.062 45° 4
56H C C FC-149 5.874 4.5 6.45 0.157 UNC 3/8”x16-2B 0.157 2.062 45° 4
Frame 48
Frame W56
Frame 56 - 56H
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-91
Mechanical Data
Cooling Tower Motors - Three Phase - TEFC - continued
Frame G HB O HD HF HH HK Hole H C LL LM S AA T DE NDE
143T 0.354 1.787 7.122 3.5 4.25 2.638 0.344 12.346 4.528 4.094 0.187 NPT 3/4” 6205 2RS 6204 2RS
143/5T 0.354 1.787 7.122 3.5 4.75 2.638 0.344 13.358 4.528 4.094 0.187 NPT 3/4” 6205 2RS 6204 2RS
145T 0.354 1.787 7.122 3.5 4.75 2.638 0.344 13.358 4.528 4.094 0.187 NPT 3/4” 6205 2RS 6204 2RS
182T 0.394 2.236 9.343 11.115 4.5 5 3.15 0.406 14.86 5.512 5.236 0.25 NPT 1” 1.772 6207 2RS 6206 2RS
182/4T 0.394 2.236 9.343 11.115 4.5 5.5 3.15 0.406 15.86 5.512 5.236 0.25 NPT 1” 1.772 6207 2RS 6206 2RS
213T 0.669 2.985 10.508 12.613 5.25 6.25 3.15 0.406 18.021 5.512 5.236 0.313 NPT 1” 2.105 6308 2RS 6207 2RS
213/5T 0.669 2.985 10.508 12.613 5.25 7 3.15 0.406 19.517 5.512 5.236 0.313 NPT 1” 2.105 6308 2RS 6207 2RS
215T 0.669 2.985 10.508 12.613 5.25 7 3.15 0.406 19.517 5.512 5.236 0.313 NPT 1” 2.105 6308 2RS 6207 2RS
6309 6209
254T 0.827 3.061 12.598 14.685 6.565 8.376 3.976 0.531 23.213 7.815 7.48 0.375 NPT 1 1/2” 2.087
2RS-C3 2RS-C3
6309 6209
254/6T 0.827 3.061 12.598 14.685 6.565 9.25 3.976 0.531 24.945 7.815 7.48 0.375 NPT 1 1/2” 2.087
2RS-C3 2RS-C3
6309 6209
256T 0.827 3.061 12.598 14.685 6.565 9.25 3.976 0.531 24.945 7.815 7.48 0.375 NPT 1 1/2” 2.087
2RS-C3 2RS-C3
6311 6211
284TS 1.023 3.535 14.067 16.154 7 9.5 3.976 0.531 25.061 7.815 7.48 0.375 NPT 1 1/2” 2.087
2RS-C3 2RS-C3
6311 6211
284T 1.023 3.535 14.067 16.154 7 9.5 3.976 0.531 26.433 7.815 7.48 0.5 NPT 1 1/2” 2.087
2RS-C3 2RS-C3
6311 6211
284/6T 1.023 3.535 14.067 16.154 7 10.25 3.976 0.531 27.929 7.815 7.48 0.5 NPT 1 1/2” 2.087
2RS-C3 2RS-C3
6312 6212
324T 1.3 4.811 15.953 18.394 8.708 10.5 4.705 0.657 29.62 9.055 8.661 0.5 NPT 2” 2.441
2RS-C3 2RS-C3
6312 6212
324/6TS 1.3 4.811 15.953 18.394 8.708 11.25 4.705 0.657 29.616 9.055 8.661 0.5 NPT 2” 2.441
2RS-C3 2RS-C3
6312 6212
324/6T 1.3 4.811 15.953 18.394 8.708 11.25 4.705 0.657 31.116 9.055 8.661 0.5 NPT 2” 2.441
2RS-C3 2RS-C3
6312 6212
326T 1.3 4.811 15.953 18.394 8.708 11.25 4.705 0.657 31.116 9.055 8.661 0.5 NPT 2” 2.441
2RS-C3 2RS-C3
6314 6314
364/5T 1.48 4.251 17.957 21.535 11.988 6.024 0.66 34.251 10.591 11.267 0.625 NPT 3” 3.578
2RS-C3 2RS-C3
6316 6314
404/5T 1.811 5.252 19.566 23.11 13.496 6.024 0.81 39.73 10.591 11.267 0.75 NPT 3” 3.544
2RS-C3 2RS-C3
444/5T 1.63 5.687 22.795 15.748 5.97 0.81 44.95 12.362 12.283 0.875 2xNPT 3” 6319 C3 6316 C3
Mechanical Data
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-93
Mechanical Data
Cooling Tower Motors - Three Phase - TEFC - continued
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-95
Mechanical Data
Cooling Tower Motors - Three Phase - TEAO - continued
Frame 143 to 145
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-97
Mechanical Data
CCP - JM - Three Phase - TEFC - Rolled Steel
Frame 2E J A P AB AH 2F B BA C CH U EL EM EP EQ
143/5JM 5.5 1.732 6.535 7.638 5.873 4.267 4.000/5.000 6.496 2.75 1.377 0.875 1.156 1 1.179 0.63
182/4JM 7.5 1.299 8.661 9.435 6.696 4.258 4.500/5.500 6.299 3.5 1.377 0.875 1.25 1 1.376 0.63
213/5JM 8.5 1.575 9.449 10.965 7.973 4.258 5.500/7.000 7.953 4.25 1.929 0.875 1.25 1 1.769 0.63
254/6JM 10 1.693 11.417 13.18 9.448 5.25 8.252/10.000 11.417 4.75 1.929 1.249 1.75 1.375 1.769 0.63
Key
Frame ET R D G HB O HD HK Hole H LL LM S AA T DE NDE
Length
143/5JM 1.575 2.88 0.771 3.5 0.12 1.784 6.724 7.327 2.629 0.343 4.563 4.09 0.187 1.118” 0.603 6206 ZZ 6203 ZZ
182/4JM 1.575 2.88 0.771 4.5 0.167 2.784 8.557 9.218 2.629 0.406 4.563 4.09 0.187 1.118” 0.661 6207 ZZ 6205 ZZ
213/5JM 1.575 2.88 0.771 5.25 0.167 2.982 10.144 10.905 3.022 0.406 5.551 5.25 0.187 1.377” 0.761 6209 ZZ 6206 ZZ
254/6JM 2.559 3.006 1.11 6.25 0.187 3.631 12.01 12.84 3.645 0.53 6.299 6.017 0.25 1.732” 0.83 6309 Z-C3 6208 Z-C3
Frame 143/5JM
Mechanical Data
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-99
Mechanical Data
CCP - JM - Three Phase - TEFC - Cast Iron
Frame 2E J A P AB AH 2F B BA CH U d1 EL EM EP
143JM 5.5 1.437 6.457 7.047 6.26 4.258 4 5.157 2.56 0.719 0.874 EUNC 3/8”-16 1.156 1 1.179
143/5JM 5.5 1.437 6.457 7.047 6.26 4.258 4.000/5.000 6.142 2.56 0.719 0.874 EUNC 3/8”-16 1.156 1 1.179
145JM 5.5 1.437 6.457 7.047 6.26 4.258 5 6.142 2.56 0.719 0.874 EUNC 3/8”-16 1.156 1 1.179
182JM 7.5 1.614 8.661 8.74 7.565 4.258 4.5 5.945 2.75 1.337 0.874 EUNC 3/8”-16 1.25 1 1.376
184JM 7.5 1.614 8.661 8.74 7.565 4.258 5.5 6.969 2.75 1.337 0.874 EUNC 3/8”-16 1.25 1 1.376
182/4JM 7.5 1.614 8.661 8.74 7.565 4.258 4.500/5.500 6.969 2.75 1.337 0.874 EUNC 3/8”-16 1.25 1 1.376
213JM 8.5 1.779 9.764 10.669 8.606 4.258 5.5 7.362 3.5 1.22 0.874 EUNC 3/8”-16 1.25 1 1.77
213/5JM 8.5 1.779 9.764 10.669 8.606 4.258 5.500/7.000 8.858 3.5 1.22 0.874 EUNC 3/8”-16 1.25 1 1.77
215JM 8.5 1.779 9.764 10.669 8.606 4.258 7 8.858 3.5 1.22 0.874 EUNC 3/8”-16 1.25 1 1.77
254JM 10 2.539 12.126 12.953 10.483 5.25 8.252 10 4.25 1.85 1.249 EUNC 1/2”-13 1.75 1.375 1.75
254JM 10 2.539 12.126 12.953 10.483 5.25 8.252 10 4.25 1.85 1.249 EUNC 1/2”-13 1.75 1.375 1.75
256JM 10 2.539 12.126 12.953 10.483 5.25 10 11.732 4.25 1.85 1.249 EUNC 1/2”-13 1.75 1.375 1.75
254/6JM 10 2.539 12.126 12.953 10.483 5.25 8.252/10.000 11.732 4.25 1.85 1.249 EUNC 1/2”-13 1.75 1.375 1.75
284JM 11 3.11 13.78 14.173 11.073 5.25 9.5 11.575 4.75 2.244 1.249 EUNC 1/2”-13 1.75 1.375 2.163
284/6JM 11 3.11 13.78 14.173 11.073 5.25 9.500/11.000 13.071 4.75 2.244 1.249 EUNC 1/2”-13 1.75 1.375 2.163
286JM 11 3.11 13.78 14.173 11.073 5.25 11 13.071 4.75 2.244 1.249 EUNC 1/2”-13 1.75 1.375 2.163
324JM 12.5 3.189 15.157 15.827 12.575 5.25 10.5 13.071 5.25 2.638 1.249 EUNC 1/2”-13 1.75 1.375 2.36
324/6JM 12.5 3.189 15.157 15.827 12.575 5.25 10.500/12.000 14.567 5.25 2.638 1.249 EUNC 1/2”-13 1.75 1.375 2.36
326JM 12.5 3.189 15.157 15.827 12.575 5.25 12 14.567 5.25 2.638 1.249 EUNC 1/2”-13 1.75 1.375 2.36
364/5JM 14.016 3.15 17.165 17.914 16.016 5.25 11.260/12.244 15.512 5.875 3.189 1.249 EUNC 1/2”-13 1.75 1.375 2.756
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-101
Mechanical Data
Frames 254JM to 326JM
Frame 364/5JM
Mechanical Data
Key
Frame ET Width R D G HB O HK Hole H LL LM S AA T DE NDE
Length
143/5JP 1.654 5.941 0.187 0.771 3.5 0.12 1.784 6.724 2.629 0.343 4.563 4.09 0.187 1.118” 0.603 6206 ZZ 6203 ZZ
182/4JP 1.654 5.941 0.187 0.771 4.5 0.167 2.784 8.557 2.629 0.406 4.563 4.09 0.187 1.118” 0.661 6207 ZZ 6205 ZZ
213/5JP 2.56 5.886 0.25 1.11 5.25 0.167 2.982 10.144 3.022 0.406 5.551 5.25 0.25 1.377” 0.761 6209 ZZ 6206 ZZ
254/6JP 2.559 5.886 0.25 1.11 6.25 0.187 3.631 12.01 3.645 0.53 6.299 6.017 0.25 1.732” 0.83 6309 Z-C3 6208 Z-C3
Frames 143/5JP
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-103
Mechanical Data
CCP - JP - Three Phase - TEFC - Rolled Steel - continued
Frames 182/4JP
Frames 213-254/6JP
Mechanical Data
Hole
Frame ET R D G HB O HH HK C LL LM S AA DE NDE
H
143JP 5.941 0.768 3.5 0.354 1.787 7.122 4.25 2.638 0.344 17.752 4.528 4.094 0.187 NPT 3/4” 6206 ZZ 6204 ZZ
143/5JP 5.941 0.768 3.5 0.354 1.787 7.122 4.75 2.638 0.344 18.736 4.528 4.094 0.187 NPT 3/4” 6206 ZZ 6204 ZZ
145JP 5.941 0.768 3.5 0.354 1.787 7.122 4.75 2.638 0.344 18.736 4.528 4.094 0.187 NPT 3/4” 6206 ZZ 6204 ZZ
182JP 5.941 0.768 4.5 0.394 2.236 9.343 5 3.15 0.406 19.475 5.512 5.236 0.187 NPT 1” 6307 ZZ 6206 ZZ
182/4JP 5.941 0.768 4.5 0.394 2.236 9.343 5.5 3.15 0.406 20.475 5.512 5.236 0.187 NPT 1” 6307 ZZ 6206 ZZ
213JP 5.886 1.11 5.25 0.669 2.985 10.508 6.25 3.15 0.406 22.804 5.512 5.236 0.25 NPT 1” 6309 Z-C3 6207 ZZ
213/5JP 5.886 1.11 5.25 0.669 2.985 10.508 7 3.15 0.406 24.264 5.512 5.236 0.25 NPT 1” 6309 Z-C3 6207 ZZ
215JP 5.886 1.11 5.25 0.669 2.985 10.508 7 3.15 0.406 24.264 5.512 5.236 0.25 NPT 1” 6309 Z-C3 6207 ZZ
254JP 5.886 1.11 6.25 0.827 3.061 12.598 8.376 3.976 0.531 27.358 7.815 7.48 0.25 NPT 1 1/2” 6309 C3 6209 C3
254/6JP 5.886 1.11 6.25 0.827 3.061 12.598 9.25 3.976 0.531 29.106 7.815 7.48 0.25 NPT 1 1/2” 6309 C3 6209 C3
256JP 5.886 1.11 6.25 0.827 3.061 12.598 9.25 3.976 0.531 29.106 7.815 7.48 0.25 NPT 1 1/2” 6309 C3 6209 C3
284JP 5.886 1.11 7 1.023 3.535 14.067 9.5 3.976 0.531 30.079 7.815 7.48 0.25 NPT 1 1/2” 6311 C3 6211 C3
284/6JP 5.886 1.11 7 1.023 3.535 14.067 10.25 3.976 0.531 31.575 7.815 7.48 0.25 NPT 1 1/2” 6311 C3 6211 C3
324JP 5.906 1.11 8 1.3 4.811 15.953 10.5 4.705 0.657 32.525 9.055 8.661 0.25 NPT 2” 6312 C3 6212 C3
326JP 5.906 1.11 8 1.3 4.811 15.953 11.25 4.705 0.657 34.021 9.055 8.661 0.25 NPT 2” 6312 C3 6212 C3
324/6JP 5.906 1.11 8 1.3 4.811 15.953 11.25 4.705 0.657 34.021 9.055 8.661 0.25 NPT 2” 6312 C3 6212 C3
364/5JP 5.886 1.413 9 1.48 4.251 17.716 11.988 6.024 0.66 35.916 10.591 11.267 0.375 NPT 3” 6314 C3 6314 C3
404/5JP 5.886 1.413 10 1.811 5.252 19.566 13.496 6.024 0.81 38.911 10.591 11.267 0.375 NPT 3” 6314 C3 6314 C3
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-105
Mechanical Data
CCP - JP - Three Phase - TEFC - Cast Iron - continued
Frame Type Flange Size AJ AK BD S T AH Angle BF Number
143JP C C FC-149 5.874 4.5 6.496 UNC 3/8”x16 0.157 7.319 45° 4
143/5JP C C FC-149 5.874 4.5 6.496 UNC 3/8”x16 0.157 7.319 45° 4
145JP C C FC-149 5.874 4.5 6.496 UNC 3/8”x16 0.157 7.319 45° 4
182JP C C FC-149 5.874 4.5 6.496 UNC 3/8”x16 0.157 7.319 45° 4
182/4JP C C FC-149 5.874 4.5 6.496 UNC 3/8”x16 0.157 7.319 45° 4
213JP C C FC-184 7.252 8.5 8.858 UNC 1/2”x13 0.248 8.13 45° 4
213/5JP C C FC-184 7.252 8.5 8.858 UNC 1/2”x13 0.248 8.13 45° 4
215JP C C FC-184 7.252 8.5 8.858 UNC 1/2”x13 0.248 8.13 45° 4
254JP C C FC-184 7.252 8.5 8.858 UNC 1/2”x13 0.248 8.13 45° 4
254/6JP C C FC-184 7.252 8.5 8.858 UNC 1/2”x13 0.248 8.13 45° 4
256JP C C FC-184 7.252 8.5 8.858 UNC 1/2”x13 0.248 8.13 45° 4
284JP C C FC-279 11 12.5 13.593 UNC 5/8”x11 0.248 8.13 45° 4
284/6JP C C FC-279 11 12.5 13.593 UNC 5/8”x11 0.248 8.13 45° 4
324JP C C FC-279 11 12.5 13.593 UNC 5/8”x11 0.248 8.13 45° 4
326JP C C FC-279 11 12.5 13.593 UNC 5/8”x11 0.248 8.13 45° 4
324/6JP C C FC-279 11 12.5 13.593 UNC 5/8”x11 0.248 8.13 45° 4
364/5JP C C FC-279 11 12.5 15.562 UNC 5/8”x11 0.248 8.13 45° 8
404/5JP C C FC-279 11 12.5 15.562 UNC 5/8”x11 0.248 8.13 45° 8
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-107
Mechanical Data
CCP - JM - Three Phase - ODP - Rolled Steel
Frame 2E J A P AB AH 2F B BA CH U EL EM EP EQ
143/5JM 5.5 1.732 6.535 6.467 5.873 4.267 4.000/5.000 6.496 2.75 1.377 0.8745 1.156 1 1.179 0.63
182/4JM 7.5 1.299 8.661 8.114 6.696 4.258 4.500/5.500 6.299 3.5 1.377 0.8745 1.25 1 1.376 0.63
213/5JM 8.5 1.575 9.449 9.846 7.973 4.258 5.500/7.000 7.953 4.25 1.929 0.8745 1.25 1 1.769 0.63
254/6JM 10 1.693 11.417 11.558 9.448 5.25 8.252/10.000 11.417 4.75 1.929 1.249 1.75 1.375 1.769 0.63
143/5JM 2.88 0.771 3.5 0.12 1.784 6.724 6.728 2.629 0.343 4.563 4.09 0.187 1.118" 6206 ZZ 6203 ZZ
182/4JM 2.88 0.771 4.5 0.167 2.784 8.557 8.557 2.629 0.406 4.563 4.09 0.187 1.118" 6207 ZZ 6205 ZZ
213/5JM 2.88 0.771 5.25 0.167 2.982 10.144 10.173 3.022 0.406 5.551 5.25 0.187 1.377" 6209 ZZ 6206 ZZ
254/6JM 3.006 1.11 6.25 0.187 3.631 12.01 12.029 3.645 0.53 6.299 6.017 0.25 1.732" 6309 Z-C3 6208 Z-C3
Key Hole
Frame ET R D G HB O HD HK C LL LM S AA DE NDE
Length H
143/5JP 1.654 5.941 0.771 3.5 0.12 1.784 6.724 6.728 2.629 0.343 - 4.563 4.09 0.187 1.118” 6206 ZZ 6203 ZZ
182/4JP 1.654 5.941 0.771 4.5 0.167 2.784 8.557 8.557 2.629 0.406 - 4.563 4.09 0.187 1.118” 6207 ZZ 6205 ZZ
213/5JP 2.56 5.886 1.11 5.25 0.167 2.982 10.144 10.173 3.022 0.406 - 5.551 5.25 0.25 1.377” 6209 ZZ 6206 ZZ
254/6JP 2.559 5.886 1.11 6.25 0.187 3.631 12.01 12.029 3.645 0.53 6.299 6.017 0.25 1.732” 6309 Z-C3 6208 Z-C3
Frame 143
Frame 182
Mechanical Data
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-109
Mechanical Data
CCP - JM and JP - Three Phase - ODP - Rolled Steel - continued
284 JP 26.913
1.250 1.375 1.750 2.157 0.250 1.110
284/6 JP 1/2”x13- 28.413
8.130 8.380 2.382 5.886 2.480 1.100 1.500
324 JP 2B 28.937
2.354
324/6 JP 30.437
364/5 JP 32.150
1.625 1.750 2.125 2.753 0.375 1.413
404/5 JP 35.152
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-111
Mechanical Data
CCP - JM and JP - Three Phase - ODP - Cast Iron
Mechanical Data
90L 140 37 164 184 159 125 156 56 135 24j6 DM8 DM6 16j6 50 40 36 8
L90S 140 37 164 184 159 100 131 56 135 24j6 DM8 DM6 16j6 50 40 36 8
L90L 140 37 164 184 159 125 156 56 135 24j6 DM8 DM6 16j6 50 40 36 8
100L 160 40 188 206 169 140 173 63 118 28j6 DM10 DM8 22j6 60 50 45 8
L100L 160 40 188 206 169 140 173 63 162 28j6 DM10 DM8 22j6 60 50 45 8
112M 190 40.5 220 215 192 140 177 70 128 28j6 DM10 DM8 24j6 60 50 45 8
L112M 190 40.5 220 215 192 140 177 70 158 28j6 DM10 DM8 24j6 60 50 45 8
132S 216 45.5 248 274 220 140 187 89 150 38k6 DM12 DM10 28j6 80 60 63 10
132M 216 45.5 248 274 220 178 225 89 150 38k6 DM12 DM10 28j6 80 60 63 10
132M/L 216 45.5 248 274 220 178/203 250 89 150 38k6 DM12 DM10 28j6 80 60 63 10
160M 254 64 308 329 266 210 254 108 174 42k6 DM16 DM16 42k6 110 110 80 12
160L 254 64 308 329 266 254 298 108 174 42k6 DM16 DM16 42k6 110 110 80 12
180M 279 78 350 360 281 241 294 121 200 48k6 DM16 DM16 48k6 110 110 80 14
180L 279 78 350 360 281 279 332 121 200 48k6 DM16 DM16 48k6 110 110 80 14
200L 318 82 385 402 319 305 370 133 222 55m6 DM20 DM20 48k6 110 110 80 16
225S/M 356 80 436 455 410 286/311 412 149 319/294 60m6 DM20 DM20 60m6 140 140 125 18
250S/M 406 100 506 486 410 311/349 467 168 354/316 65m6 DM20 DM20 60m6 140 140 125 18
280S/M 457 100 557 599 445 368/419 517 190 385/334 75m6 DM20 DM20 65m6 140 140 125 20
315S/M 508 120 630 657 525 406/457 621 216 443 80m6 DM20 DM20 65m6 170 140 160 22
315L 508 120 630 657 589 508 752 216 502 80m6 DM20 DM20 65m6 170 140 160 22
355M/L 610 140 750 736 609 560/630 760 254 483/413 100m6 DM24 DM20 80m6 210 170 200 28
Frame FA G GB GD GF H HA HB HC HD HF HH HK K L LC LL LM S1 DE NDE
63 3 8.5 7.2 4 3 63 7 25.5 130 156.3 68.5 80 59 7 216 241 108.5 99 2xM20x1,5 6201 ZZ 6201 ZZ
80 5 15.5 11 6 5 80 8 43.5 163 174.3 87 100 59 10 277 313 108.5 99 2xM20x1,5 6204 ZZ 6203 ZZ
90S 5 20 13 7 5 90 9 45 182 182.4 90 106 67 10 305 350 115 104 2xM25x1,5 6205 ZZ 6204 ZZ
90L 5 20 13 7 5 90 9 45 182 182.4 90 118.5 67 10 329 375 115 104 2xM25x1,5 6205 ZZ 6204 ZZ
100L 6 24 18.5 7 6 100 10 61.5 205 244 106.4 133 67 12 376 431 115 104 6206 ZZ 6205 ZZ
L100L 6 24 18.5 7 6 100 10 61.5 205 244 106.4 133 67 12 115 104 6206 ZZ 6205 ZZ
112M 8 24 20 7 7 112 10 54.5 226 280 112 140 80 12 394 448 140 133 2xM32x1,5 6207 ZZ 6206 ZZ
L112M 8 24 20 7 7 112 10 54.5 226 280 112 140 80 12 140 133 2xM32x1,5 6207 ZZ 6206 ZZ
132S 8 33 24 8 7 132 16 75 274 319 132 159 80 12 452 519 140 133 2xM32x1,5 6308 ZZ 6207 ZZ
132M 8 33 24 8 7 132 16 75 274 319 132 178 80 12 489 557 140 133 2xM32x1,5 6308 ZZ 6207 ZZ
132M/L 8 33 24 8 7 132 16 75 274 319 132 190.5 80 12 515 582 140 133 2xM32x1,5 6308 ZZ 6207 ZZ
160M 12 37 37 8 8 160 22 79 331 374 168 213 101 14.5 598 712 198.5 190 2xM40x1,5 6309 C3 6209 C3
160L 12 37 37 8 8 160 22 79 331 374 168 235 101 14.5 642 756 198.5 190 2xM40x1,5 6309 C3 6209 C3
180M 14 42.5 42.5 9 9 180 28 92 366 413 180 241.5 101 14.5 664 782 198.5 190 2xM40x1,5 6311 C3 6211 C3
180L 14 42.5 42.5 9 9 180 28 92 366 413 180 260.5 101 14.5 702 820 198.5 190 2xM40x1,5 6311 C3 6211 C3
200L 14 49 42.5 10 9 200 30 119 407 464 218 285.5 119.5 18.5 767 880 230 220 2xM50x1,5 6312 C3 6212 C3
225S/M 18 53 53 11 11 225 34 254 453 541 421 212 153 18.5 886 1034 269 285 2xM50x1,5 6314 C3 6314 C3
250S/M 18 58 53 11 11 250 43 297 493 583 463 214 153 24 965 1113 269 285 2xM63x1,5 6314 C3 6314 C3
280S/M 18 67.5 58 12 11 280 42 386 580 700 572 266 151 24 1071 1223 314 312 2xM63x1,5 6316 C3 6316 C3
315S/M 18 71 58 14 11 315 48 386 644 768 592 264 176 28 1274 1426 379 382 2xM63x1,5 6319 C3 6316 C3
315L 18 71 58 14 11 315 48 336 644 774 575 284 220 28 1389 1536 404 436 2xM63x1,5 6319 C3 6316 C3
Mechanical Data
355M/L 22 90 71 16 14 355 50 461 723 898 700 339 220 28 1482 1677 404 436 2xM63x1,5 6322 C3 6319 C3
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-113
Mechanical Data
IEC Metric Motors - Cast Iron Frames - continued
Frames 63 to 132M/L
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-115
Mechanical Data
IEC Metric Motors - Cast Iron Frames - Additional Flange Detail
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-117
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
.1809EP3EAL80-W22 A-72; A-270 $540 .3318ES1BW56C-S A-21; A-150 $304
.1809EP3WAL80-W22 A-72; A-270 $540 .3318ES1BW56-S A-19; A-149; A-168 $283
.1812EP3EAL71-W22 A-75; A-238 $338 .3318ES1RAD56NZ A-252 $423
.1818EP3EAL63-W22 A-75; A-238 $267 .3318ES1RFDW56-S A-19; A-149; A-168 $284
.1836EP3EAL63-W22 A-75; A-238 $280 .3318ES3E56CFL-S A-45; A-95 $274
.2509EP3EAL80-W22 A-75; A-238 $583 .3318ES3E56C-S A-42; A-157 $274
.2509EP3WAL80-W22 A-75; A-238 $583 .3318ES3E56-S A-32; A-156 $253
.2512EP3EAL71-W22 A-75; A-238 $363 .3318ES3EBMW56CFL-S A-71; A-269 $1,015
.2512OT3E56C-S A-55 $316 .3318ES3EBMW56-S A-70; A-268 $977
.2512OT3E56-S A-47; A-95 $288 .3318OS1AEC56 A-171 $156
.2518EP3EAL71-W22 A-75; A-238 $282 .3318OS1BRBFBOW56-S A-171 $293
.2518ES1BW56C-S A-20 $288 .3318OS1BRBFBW56-S A-171 $281
.2518ES1BW56-S A-19 $267 .3318OS1BSPRB48Z-S A-24; A-153; A-170 $272
.2518ES3E56C-S A-41; A-92 $270 .3318OS1BSPRBO48Z-S A-24; A-153; A-170 $284
.2518ES3E56-S A-26; A-155 $249 .3318OS1BSPRBOW56-S A-24; A-153; A-170 $288
.2518ES3EBMW56CFL-S A-71; A-269 $966 .3318OS1BSPRBW56-S A-24; A-153; A-170 $276
.2518ES3EBMW56-S A-70; A-268 $928 .3318OT1B48CH-S A-25; A-154 $299
.2518ES3H56C-S A-41; A-92 $270 .3318OT1B48-S A-23; A-152; A-169 $275
.2518OS1ASPRB48Z-S A-24; A-153; A-170 $262 .3318OT1BRBOW56-S A-24; A-153; A-170 $325
.2518OS1ASPRBO48Z-S A-24; A-153; A-170 $274 .3318OT1BW56CFL-S A-25; A-154 $303
.2518OS1BRBFBOW56-S A-168; A-253 $283 .3318OT1BW56C-S A-25; A-154 $303
.2518OS1BRBFBW56-S A-168; A-253 $271 .3318OT1BW56-S A-23; A-152; A-169 $275
.2518OS1BSPRBO48Z-S A-24; A-153; A-170 $274 .3318OT3E56CFL-S A-60; A-161 $284
.2518OT1B48CH-S A-25; A-154 $269 .3318OT3E56C-S A-56; A-160 $284
.2518OT1B48-S A-23; A-152; A-169 $241 .3318OT3E56-S A-50; A-159 $256
.2518OT1BW56CFL-S A-144; A-337 $269 .3318OT3ERB56-S A-60; A-161 $314
.2518OT1BW56C-S A-25; A-154 $269 .3318OT3H56CFL-S A-60; A-161 $284
.2518OT1BW56-S A-23; A-152; A-169 $241 .3318OT3H56-S A-50; A-159 $269
.2518OT3E48-S A-47; A-95 $235 .3318XS1B56 A-107; A-258 $670
.2518OT3E56CFL-S A-59 $263 .3318XS1B56C A-107; A-258 $816
.2518OT3E56C-S A-55 $263 .3318XS3E56 A-113; A-164 $713
.2518OT3E56-S A-50; A-159 $235 .3318XS3E56C A-118 $877
.2518OT3H56CFL-S A-59 $263 .3336ES1BJPRW56C-S A-189 $282
.2536EP3EAL63-W22 A-75; A-238 $286 .3336ES1BJPRW56J-S A-189 $296
.2536ES1BW56C-S A-20 $280 .3336ES1BJPW56C-S A-192 $263
.2536ES1BW56-S A-19 $257 .3336ES1BJPW56J-S A-192 $282
.2536ES3E56C-S A-42; A-157 $258 .3336ES1BW56CFL-S A-21 $288
.2536ES3E56-S A-26; A-155 $237 .3336ES1BW56C-S A-21; A-150 $288
.2536OT1B48CH-S A-25; A-154 $277 .3336ES1BW56-S A-19; A-149; A-168 $267
.2536OT1B48-S A-23; A-152; A-169 $253 .3336ES3E56CFL-S A-45; A-95 $270
.2536OT1BW56C-S A-25; A-154 $281 .3336ES3E56C-S A-42; A-157 $270
.2536OT1BW56-S A-23; A-152; A-169 $253 .3336ES3E56-S A-32; A-156 $249
.2536OT3E56C-S A-56; A-160 $259 .3336ES3EJP56J-S A-193 $259
.2536OT3E56-S A-50; A-159 $231 .3336ES3EJPR56C-S A-193 $257
.3312OT3E56C-S A-56; A-160 $361 .3336ES3EJPR56J-S A-194 $268
.3312OT3E56-S A-50; A-159 $333 .3336ES3H56CFL-S A-46; A-158 $270
.3318EP3ESS56C A-133 $550 .3336ES3H56C-S A-42; A-157 $270
.3318EP3ESS56CFL A-134 $550 .3336OS1BJPRW56C-S A-192 $237
.3318ES1BPFC48 A-162; A-294 $311 .3336OS1BJPRW56J-S A-192 $255
.3318ES1BRBPFC48 A-162; A-294 $325 .3336OS1BJPW56J-S A-193 $254
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-119
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
.5036OS3HJP56J-S A-195 $236 .7518ES3H56CFL-S A-46; A-158 $333
.5036OT1B48CH-S A-25; A-154 $300 .7518ES3H56C-S A-42; A-157 $333
.5036OT1B48-S A-23; A-152; A-169 $276 .7518ET3EAL90S/LFF-W A-78; A-241 $479
.5036OT1BOW56CFL-S A-26; A-155 $327 .7518ET3EAL90S/L-W22 A-75; A-238 $420
.5036OT1BW56CFL-S A-26; A-155 $310 .7518ET3WAL90S/LFF-W A-78; A-241 $479
.5036OT1BW56C-S A-25; A-154 $310 .7518ET3WAL90S/L-W22 A-75; A-238 $420
.5036OT1BW56-S A-23; A-26; A-152; A-155; A-263 $282 .7518OS1AEC56 A-171 $201
.5036OT3E56CFL-S A-60; A-161; A-171 $286 .7518OS1BRBFBOW56-S A-171 $379
.5036OT3E56C-S A-56; A-160 $286 .7518OS1BRBFBW56-S A-171 $367
.5036OT3E56-S A-50; A-159 $258 .7518OS1DEC56 A-171 $201
.5036XS1B56 A-113; A-164 $636 .7518OT1B56CFL-S A-26; A-155 $415
.5036XS1B56C A-113; A-164 $717 .7518OT1B56C-S A-25; A-154 $415
.5036XS3E56 A-115; A-165 $782 .7518OT1B56-S A-23; A-152; A-169 $387
.5036XS3E56C A-119; A-165 $856 .7518OT1BRBO56-S A-24; A-153; A-170 $434
.5082OS1AEC56 A-171 $199 .7518OT3E56CFL-S A-60; A-161 $358
.5082OS1DEC56 A-171 $220 .7518OT3E56C-S A-56; A-160 $358
.5509EP3EAL90L-W22 A-75; A-238 $696 .7518OT3E56-S A-50; A-159 $330
.5509EP3WAL90S/L-W22 A-75; A-238 $696 .7518OT3ERB56-S A-60; A-161 $388
.5512EP3EAL80-W22 A-75; A-238 $405 .7518OT3H56CFL-S A-60; A-161 $358
.5518EP3EAL80FF-W22 A-77; A-110; A-240 $383 .7518OT3H56C-S A-56; A-160 $358
.5518EP3EAL80-W22 A-75; A-238 $333 .7518OT3H56-S A-50; A-159 $347
.5536EP3EAL71FF-W22 A-78; A-241 $366 .7518XS1B56 A-113; A-164 $868
.5536EP3EAL71-W22 A-75; A-238 $316 .7518XS1B56C A-113; A-164 $912
.7509ET3EAL100L-W22 A-75; A-238 $869 .7518XS3E56 A-115; A-165 $817
.7512EP3ESS56C A-134 $723 .7518XS3E56C A-119; A-165 $944
.7512EP3ESS56CFL A-135 $723 .7536AS1RAF56Z-S A-253 $395
.7512ES1B56CFL-S A-22; A-150 $669 .7536AS3EAF56Z-S A-253 $402
.7512ES1B56C-S A-21; A-150 $669 .7536EP3ESS56C A-134 $590
.7512ES1B56-S A-19; A-22; A-149; A-151; A-168 $648 .7536EP3ESS56CFL A-135 $590
.7512ES3E56CFL-S A-46; A-158 $449 .7536ES1B56CFL-S A-22; A-150 $353
.7512ES3E56C-S A-42; A-157 $449 .7536ES1B56C-S A-21; A-150 $353
.7512ES3E56-S A-32; A-156 $427 .7536ES1B56-S A-19; A-149; A-168 $297
.7512ES3H56CFL-S A-46; A-158 $448 .7536ES1BJP56C-S A-192 $320
.7512ET3EAL90S-W22 A-75; A-238 $537 .7536ES1BJP56J-S A-192 $330
.7512ET3WAL90S-W22 A-75; A-238 $537 .7536ES1BJPR56C-S A-192 $341
.7512OT3E56C-S A-56; A-160 $412 .7536ES1BJPR56J-S A-192 $336
.7512OT3E56-S A-50; A-159 $384 .7536ES1BOL56-S A-19; A-22; A-149; A-151; A-252 $329
.7518EP3ESS56C A-134 $616 .7536ES3E56CFL-S A-46; A-158 $311
.7518EP3ESS56CFL A-135 $616 .7536ES3E56C-S A-42; A-157 $311
.7518ES1B56CFL-S A-22; A-150 $370 .7536ES3E56-S A-32; A-156 $287
.7518ES1B56C-S A-21; A-150 $370 .7536ES3EJP56J-S A-194 $301
.7518ES1B56-S A-19; A-149; A-168 $348 .7536ES3EJPR56C-S A-194 $293
.7518ES1BPFB56 A-168; A-253 $414 .7536ES3EJPR56J-S A-194 $319
.7518ES1BRBPFB56 A-168; A-253 $433 .7536ES3H56CFL-S A-46; A-158 $310
.7518ES1RAD56NZ A-253 $553 .7536ES3H56C-S A-42; A-157 $310
.7518ES1RFD56-S A-19; A-149; A-168 $357 .7536ES3H56-S A-32; A-156 $288
.7518ES3E56CFL-S A-46; A-158 $332 .7536ES3HJP56J-S A-194 $301
.7518ES3E56C-S A-42; A-157 $332 .7536ET3WAL80-W22 A-75; A-238 $397
.7518ES3E56-S A-32; A-156 $311 .7536OS1BCDW56-S A-23; A-152; A-169 $237
.7518ES3EBMW56CFL-S A-72; A-270 $1,339 .7536OS1BJPRW56C-S A-193 $297
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-121
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
00118ET3EBMR143TC-S A-72; A-270 $1,767 00118OT3ECD143T-S A-261 $398
00118ET3ECT143TF1-W2 A-180 $647 00118OT3ERB56-S A-60; A-161 $408
00118ET3ECT143T-W22 A-180 $647 00118OT3H143JM-S A-211 $486
00118ET3EPM143/5Y-W2 A-187 $594 00118OT3H143JM-SG A-221 $626
00118ET3ER143TC-S A-46; A-158 $484 00118OT3H143TC-S A-56 $424
00118ET3ER143TC-W22 A-46; A-158 $572 00118OT3H143T-S A-50; A-264 $390
00118ET3ESS143TC A-134 $857 00118OT3H143T-SG A-176 $530
00118ET3ESS143TCFL A-135 $857 00118OT3H56CFL-S A-60; A-161 $378
00118ET3ESS56C A-134 $723 00118OT3P143TC-S A-56; A-160 $424
00118ET3ESS56CFL A-135 $723 00118OT3P143T-S A-50; A-159 $390
00118ET3H143JM-S A-202 $613 00118OT3V143JM-S A-211 $486
00118ET3H143JM-SG A-219 $764 00118OT3V143T-SG A-176 $530
00118ET3H143JM-W22 A-202 $613 00118ST3HIE143T-W22 A-62; A-97 $922
00118ET3H143TC-S A-42; A-93 $484 00118ST3QIE143TC-W22 A-65; A-100 $972
00118ET3H143TC-W22 A-42; A-157 $555 00118ST3QIE143T-W22 A-62; A-97 $922
00118ET3H143T-S A-32; A-86 $459 00118ST3QIER143TC-W2 A-66; A-101 $1,000
00118ET3H143T-SG A-172 $599 00118XS1B56 A-113; A-164 $988
00118ET3H143T-W22 A-32; A-156 $527 00118XS1B56C A-113; A-164 $1,036
00118ET3H56CFL-S A-46 $407 00118XT3E143T A-115 $901
00118ET3H56C-S A-42 $407 00118XT3E143TC A-119; A-165 $1,054
00118ET3H56-S A-32 $379 00118XT3E56 A-115 $922
00118ET3HBM143T-W22 A-69; A-267 $1,494 00118XT3E56C A-119 $1,007
00118ET3PCT143T-W22 A-180 $647 00118XT3ER143TC A-119 $1,072
00118ET3V143JM-S A-202 $613 00118XT3H143T A-115 $901
00118ET3V143T-SG A-172 $599 00136AS1RAF56Z-S A-254 $459
00118ET3WAL90S-W22 A-75; A-238 $470 00136AS3EAF56Z-S A-254 $435
00118NT3ESS143TC A-134 $889 00136EG3E143T-W22 A-78; A-241 $569
00118NT3ESS143TCFL A-135 $889 00136ES1B143T-S A-19; A-22; A-252 $553
00118NT3ESS56C A-134 $735 00136ES1B56CFL-S A-22; A-150 $378
00118NT3ESS56CFL A-135 $735 00136ES1B56C-S A-21; A-150 $378
00118NT3FVD143TC-W22 A-106 $697 00136ES1B56-S A-19; A-22; A-149; A-151; A-252 $376
00118OS1BRBFBOW56-S A-171 $408 00136ES1BJP56C-S A-192 $344
00118OS1BRBFBW56-S A-171 $396 00136ES1BJP56J-S A-192 $374
00118OT1B56CFL-S A-26; A-155 $449 00136ES1BJPR56C-S A-192 $357
00118OT1B56C-S A-25; A-154 $449 00136ES1BJPR56J-S A-192 $386
00118OT1B56-S A-23; A-26; A-152; A-155; A-263 $421 00136ES1BOL56-S A-19 $408
00118OT1BO56-S A-23; A-152; A-169 $438 00136ES1E143JM A-199 $682
00118OT1BRBO56-S A-24; A-153; A-170 $468 00136ET3E143TC-W22 A-42; A-93 $566
00118OT3E143JM-S A-210 $486 00136ET3E143T-S A-32; A-86 $420
00118OT3E143JM-SG A-221 $626 00136ET3E143T-SG A-172 $560
00118OT3E143JMV-S A-213 $541 00136ET3E143T-W22 A-32; A-156 $538
00118OT3E143JP-S A-214 $486 00136ET3EAL80-W22 A-75; A-238 $444
00118OT3E143JP-SG A-222 $626 00136ET3EJPRW56C-S A-194 $425
00118OT3E143TC-S A-56; A-160 $424 00136ET3EJPRW56J-S A-194 $429
00118OT3E143TC-SG A-176 $564 00136ET3EJPW56J-S A-194 $434
00118OT3E143T-S A-50; A-159 $390 00136ET3EPM143/5Y-W2 A-187 $565
00118OT3E143T-SG* A-176 $530 00136ET3ER143TC-W22 A-46; A-95 $577
00118OT3E56CFL-S A-60; A-161 $378 00136ET3ESS56C A-134 $701
00118OT3E56C-S A-56; A-160 $378 00136ET3ESS56CFL A-135 $701
00118OT3E56-S A-50 $350 00136ET3EW56CFL-S A-46; A-158 $420
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-123
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
00156ET3ESS143TCFL A-135 $858 00156XT3E56C A-119 $1,038
00156ET3ESS56C A-134 $825 00156XT3H143T A-115 $916
00156ET3ESS56CFL A-135 $825 00158AT3PCT145T-W22 A-182 $696
00156ET3H143JM-SG A-220 $850 00158EG3EL145T-W22 A-80 $606
00156ET3H143TC-W22 A-42; A-93 $571 00158ES1B145T-S A-19; A-149; A-168 $612
00156ET3H143T-S A-33; A-86 $473 00158ES1B56CFL-S A-22; A-150 $478
00156ET3H143T-SG A-172 $613 00158ES1B56C-S A-21; A-150 $478
00156ET3H143T-W22 A-33; A-156 $543 00158ES1B56-S A-19; A-22; A-149; A-151; A-168 $456
00156ET3H56C-S A-42; A-157 $461 00158ES1BO56C-S A-21; A-150 $493
00156ET3HJP56J-S A-194 $473 00158ES1E145JM A-199 $754
00156ET3HJPR56J-S A-194 $468 00158ES1E145JP A-200 $754
00156ET3WAL90S-W22 A-75; A-238 $504 00158ES1E145T-S A-19 $611
00156OS1BCD56-S A-23; A-26; A-152; A-155; A-263 $311 00158ES1RAD56N A-253 $1,014
00156OS1BJP56J-S A-193 $382 00158ES1RFD145T-S A-19; A-149; A-168 $504
00156OS1BJPR56C-S A-193 $338 00158ES1RFD56H-S A-19 $502
00156OS1BJPR56J-S A-193 $382 00158ET3E145HP-W22 A-233 $663
00156OS3EJP56J-S A-195 $296 00158ET3E145JM-S A-202 $643
00156OS3EJPR56C-S A-195 $290 00158ET3E145JM-SG A-220 $793
00156OS3EJPR56J-S A-195 $305 00158ET3E145JM-W22 A-202 $643
00156OS3HJP56J-S A-195 $296 00158ET3E145JP-S A-206 $653
00156OS3HJPR56C-S A-195 $290 00158ET3E145JP-SG A-221 $793
00156OT1B56CFL-S A-26; A-155 $421 00158ET3E145JP-W22 A-206 $653
00156OT1B56C-S A-25; A-154 $421 00158ET3E145TC-S A-42; A-93 $504
00156OT1B56-S A-23; A-152; A-169 $393 00158ET3E145TC-W22 A-42; A-157 $579
00156OT1BO56CFL-S A-26; A-155 $438 00158ET3E145T-S A-33 $480
00156OT1BRBO56-S A-24; A-153; A-170 $450 00158ET3E145T-SG A-172 $620
00156OT3E143JM-S A-211 $534 00158ET3E145T-W22 A-33; A-86 $551
00156OT3E143JM-SG A-222 $674 00158ET3E56CFL-S A-46 $463
00156OT3E143JMV-S A-214 $589 00158ET3E56C-S A-42 $463
00156OT3E143JP-S A-215 $534 00158ET3E56-S A-33 $435
00156OT3E143JP-SG A-222 $674 00158ET3EAL90LFF-W22 A-78; A-241 $583
00156OT3E143JPV-S A-217 $589 00158ET3EAL90L-W22 A-75; A-238 $524
00156OT3E143TC-S A-56 $476 00158ET3EBM145TC-S A-72; A-270 $1,904
00156OT3E143T-S A-50; A-159 $442 00158ET3EBM145T-S A-71; A-269 $1,866
00156OT3E143T-SG A-176 $582 00158ET3EBM145T-W22 A-69; A-267 $1,569
00156OT3E56CFL-S A-60; A-161 $408 00158ET3EBMR145TC-S A-72; A-270 $1,904
00156OT3E56C-S A-56; A-160 $408 00158ET3ECT145TF1-W2 A-180 $676
00156OT3E56-S A-50 $380 00158ET3ECT145T-W22 A-180 $676
00156OT3H143JM-SG A-222 $674 00158ET3EPM143/5Y-W2 A-189 $617
00156OT3H143TC-S A-56 $476 00158ET3ER145TC-S A-46; A-95 $504
00156OT3H143T-S A-50; A-264 $442 00158ET3ER145TC-W22 A-46; A-158 $596
00156OT3V143JM-S A-211 $534 00158ET3ESS145TC A-134 $872
00156OT3V143JP-S A-215 $534 00158ET3ESS145TCFL A-135 $872
00156ST3HIE143T-W22 A-62; A-97 $981 00158ET3ESS56C A-134 $846
00156ST3QIE143TC-W22 A-66; A-101 $1,031 00158ET3ESS56CFL A-135 $846
00156ST3QIE143T-W22 A-62; A-97 $981 00158ET3H145JM-S A-202 $643
00156XS1C56 A-113; A-164 $1,121 00158ET3H145JM-SG A-220 $793
00156XS1C56C A-113; A-164 $1,274 00158ET3H145JM-W22 A-202 $643
00156XT3E143T A-115 $916 00158ET3H145TC-S A-42; A-93 $504
00156XT3E143TC A-119; A-165 $1,069
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-127
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
00236XT3E145TC A-119; A-165 $1,045 00312ST3HIE213T-W22 A-62; A-97 $1,537
00236XT3E56H A-115 $1,171 00312ST3QIE213TC-W22 A-66; A-101 $1,617
00236XT3E56HC A-119 $1,125 00312ST3QIE213T-W22 A-62; A-97 $1,537
00236XT3H145T A-115 $935 00312XT3E213T A-115 $1,792
00289EP3PCT145VF1-W2 A-185 $929 00312XT3E213TC A-119 $1,868
00289EP3PCT145V-W22 A-185 $929 00312XT3H213T A-115 $1,792
00309ET3E215TC-W22 A-43; A-93 $2,166 00318AT3ECT182TF1-W2 A-183 $804
00309ET3E215T-W22 A-33 $2,115 00318AT3ECT182T-W22 A-183 $804
00309ET3EAL132M-W22 A-75; A-238 $1,610 00318AT3HCT182T-W22 A-183 $804
00309ET3EBM215T-W22 A-69; A-267 $3,740 00318AT3PCT182TF1-W2 A-183 $804
00309ET3H215T-W22 A-33; A-86 $2,115 00318AT3PCT182T-W22 A-183 $804
00309ET3YAL132M-W22 A-75; A-238 $1,610 00318EG3E182T-W22 A-80 $729
00309ST3QIE215TC-W22 A-66; A-101 $2,963 00318ES1B184JM A-199 $1,182
00309ST3QIE215T-W22 A-62; A-97 $2,883 00318ES1B184JP A-200 $1,182
00309XT3E215T A-115; A-165 $2,805 00318ES1B184TC A-21 $913
00312AT3ECT213TF1-W2 A-183 $1,369 00318ES1C184T A-20 $875
00312AT3ECT213T-W22 A-183 $1,369 00318ES1C184TC A-21; A-150 $913
00312AT3HCT213T-W22 A-183 $1,369 00318ES1DFD184T A-20 $915
00312AT3PCT213TF1-W2 A-183 $1,369 00318ES1DFD184T-W22 A-246 $915
00312AT3PCT213T-W22 A-183 $1,369 00318ES1E184JM A-199 $1,182
00312EG3E213T-W22 A-80 $1,242 00318ES1E184JP A-200 $1,182
00312ES1E215T A-20; A-22; A-149; A-151; A-168 $1,327 00318ES1E184T A-20 $874
00312ES3EOW215T-W22 A-256 $1,027 00318ES1E184TC A-21 $913
00312ET3E213JM-S A-202 $1,423 00318ES1ER184TC A-22; A-150 $912
00312ET3E213JM-W22 A-202 $1,423 00318ET3E182HP-W22 A-233 $923
00312ET3E213JP-S A-206 $1,449 00318ET3E182JM-S A-202 $1,022
00312ET3E213JP-W22 A-206 $1,449 00318ET3E182JM-SG A-220 $1,211
00312ET3E213TC-W22 A-43; A-157 $1,180 00318ET3E182JMV-S A-202 $1,080
00312ET3E213T-S A-34; A-86 $983 00318ET3E182JM-W22 A-202 $1,022
00312ET3E213T-SG A-172 $1,183 00318ET3E182JP-S A-206 $1,041
00312ET3E213T-W22 A-34; A-86 $1,129 00318ET3E182JP-SG A-221 $1,211
00312ET3EAL132M-W22 A-76; A-239 $1,247 00318ET3E182JP-W22 A-206 $1,041
00312ET3EBM213T-W22 A-69; A-267 $3,220 00318ET3E182TC-S A-43; A-93 $610
00312ET3ECT213T-W22 A-180 $1,329 00318ET3E182TC-SG A-172 $780
00312ET3ER213TC-S A-46 $1,028 00318ET3E182TC-W22 A-43; A-93 $700
00312ET3ER213TC-W22 A-46; A-95 $1,203 00318ET3E182T-S A-34 $577
00312ET3H213T-S A-34 $983 00318ET3E182T-SG A-172 $747
00312ET3H213T-SG A-172 $1,183 00318ET3E182T-W22 A-34; A-86 $663
00312ET3H213T-W22 A-34; A-86 $1,129 00318ET3EAL100L-W22 A-76; A-239 $672
00312ET3HCT213T-W22 A-180 $1,329 00318ET3EBM182TC-S A-72; A-270 $2,189
00312ET3PCT213T-W22 A-180 $1,329 00318ET3EBM182T-S A-71; A-269 $2,117
00312ET3YAL132M-W22 A-76; A-239 $1,247 00318ET3EBM182T-W22 A-69; A-267 $2,052
00312OT3E213JM-S A-211 $1,105 00318ET3EBMR182TC-S A-72; A-270 $2,189
00312OT3E213JMV-S A-214 $1,187 00318ET3ECT182TF1-W2 A-180 $781
00312OT3E213JP-S A-215 $1,095 00318ET3ECT182T-W22 A-180 $781
00312OT3E213TC-S A-56; A-160 $826 00318ET3EPM182/4Y-W2 A-189 $735
00312OT3E213T-S A-50; A-159 $775 00318ET3ER182TC-S A-47 $610
00312OT3E213T-SG A-176 $975 00318ET3ER182TC-W22 A-47; A-95 $721
00312OT3H213TC-S A-56 $826 00318ET3ESS182TC A-134 $1,453
00312OT3H213T-S A-50 $775
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-129
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
00336ET3EJP56J-S A-194 $634 00336OT3E56C-S A-56 $513
00336ET3EJPR56C-S A-194 $602 00336OT3E56-S A-51 $485
00336ET3EJPR56J-S A-194 $624 00336OT3H145JM-S A-211 $660
00336ET3EPM182/4Y-W2 A-189 $847 00336OT3H145JM-SG A-222 $800
00336ET3ER145TC-W22 A-47; A-95 $677 00336OT3H145JP-S A-215 $660
00336ET3ER182TC-S A-47; A-158 $698 00336OT3H145TC-S A-56 $579
00336ET3ER182TC-W22 A-47; A-95 $826 00336OT3H145T-S A-51; A-264 $545
00336ET3ESS145TCFL A-135 $1,564 00336OT3V145JM-S A-211 $660
00336ET3ESS182TC A-134 $1,564 00336OT3V145JM-SG A-222 $800
00336ET3ESS182TCFL A-135 $1,564 00336OT3V145JP-S A-215 $660
00336ET3H145JM-S A-202 $897 00336OT3V145TC-S A-56; A-160 $579
00336ET3H145JM-W22 A-202 $764 00336ST3HIE182T-W22 A-62; A-97 $1,267
00336ET3H182JM-S A-202 $918 00336ST3QIE182TC-W22 A-66; A-101 $1,332
00336ET3H182JM-SG A-220 $1,103 00336ST3QIE182T-W22 A-62; A-97 $1,267
00336ET3H182JM-W22 A-202 $918 00336XT3E182T A-115 $1,192
00336ET3H182JP-W22 A-206 $933 00336XT3E182TC A-119 $1,262
00336ET3H182TC-S A-43; A-93 $698 00336XT3H182T A-115 $1,192
00336ET3H182TC-W22 A-43; A-157 $802 00389EP3PCT182VF1-W2 A-185 $1,369
00336ET3H182T-S A-34; A-86 $665 00389EP3PCT182V-W22 A-185 $1,369
00336ET3H182T-SG A-172 $835 00389EP3QCT182VF1-W2 A-185 $1,369
00336ET3H182T-W22 A-34; A-156 $763 00389EP3QCT182V-W22 A-185 $1,369
00336ET3H56CFL-S A-47 $606 00409ET3Y160M-W22 A-76; A-239 $1,947
00336ET3H56C-S A-43 $606 00412ET3EAL132M-W22 A-76; A-239 $1,254
00336ET3HJP56J-S A-194 $634 00412ET3YAL132MFF-W2 A-78; A-241 $1,333
00336ET3WAL100L-W22 A-76; A-239 $805 00412ET3YAL132M-W22 A-76; A-109; A-239 $1,254
00336OS1B182JM A-209 $977 00418ET3EAL112M-W22 A-76; A-239 $679
00336OS1B182JP A-209 $977 00418ET3YAL112MFF-W2 A-78; A-241 $749
00336OS1B182T A-23 $607 00418ET3YAL112M-W22 A-76; A-239 $679
00336OS1C182T A-23; A-263 $606 00436ET3EAL112M-W22 A-76; A-239 $874
00336OS1CCD56-S A-23 $432 00436ET3YAL112MFF-W2 A-78; A-241 $944
00336OS1DJP56J-S A-193 $499 00436ET3YAL112M-W22 A-76; A-239 $874
00336OS1DJPR56C-S A-193 $482 00456AP1DGD145TZ-S A-254 $1,025
00336OS1DJPR56J-S A-193 $499 00456AP3EGD145TZ-S A-254 $795
00336OS3EJP56J-S A-195 $339 00456AP3EGD182Z-S A-254 $827
00336OS3EJPR56C-S A-195 $332 00509ES3EOW256T-W22 A-256 $2,242
00336OS3EJPR56J-S A-195 $350 00509ET3E254T-W22 A-34 $3,301
00336OS3HJP56J-S A-195 $339 00509ET3EBM254T-W22 A-69; A-267 $5,641
00336OT1B56CFL-S A-26; A-155 $596 00509ET3H254T-W22 A-34; A-86 $3,301
00336OT1B56C-S A-25; A-154 $596 00509ET3Y160M-W22 A-76; A-239 $2,244
00336OT1B56-S A-23 $568 00509ST3QIE254TC-W22 A-66; A-101 $4,363
00336OT1BO56CFL-S A-26; A-155 $613 00509ST3QIE254T-W22 A-62; A-97 $4,243
00336OT3E145JM-S A-211 $660 00509XT3E254T A-115 $3,953
00336OT3E145JM-SG A-222 $800 00512AT3ECT215TF1-W2 A-183 $1,563
00336OT3E145JMV-S A-214 $715 00512AT3ECT215T-W22 A-183 $1,563
00336OT3E145JP-S A-215 $660 00512AT3HCT215TF1-W2 A-183 $1,563
00336OT3E145JP-SG A-223 $800 00512AT3HCT215T-W22 A-183 $1,563
00336OT3E145JPV-S A-218 $715 00512AT3PCT215TF1-W2 A-183 $1,563
00336OT3E145TC-S A-56 $579 00512AT3PCT215T-W22 A-183 $1,563
00336OT3E145T-S A-51; A-264 $545 00512EG3EL215T-W22 A-80 $1,465
00336OT3E145T-SG A-176 $685 00512ES1E215T A-20 $1,588
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-131
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
00518ET3HCT184T-W22 A-180 $894 00536ES1B184JP A-200 $1,457
00518ET3P184JM-S A-203 $1,141 00536ES1B184T A-20; A-22 $1,040
00518ET3P184JM-W22 A-203 $1,141 00536ES1C184JM A-199 $1,457
00518ET3P184T-S A-34 $672 00536ES1E184JM A-199 $1,457
00518ET3P184T-W22 A-34; A-86 $772 00536ES1E184JP A-200 $1,457
00518ET3PCT184TF1-W2 A-180 $894 00536ES1E184T A-20 $1,038
00518ET3PCT184T-W22 A-180 $894 00536ES1E184TC A-21 $1,077
00518ET3V184JM-S A-203 $1,141 00536ES3ESA80ML A-271 $1,160
00518ET3V184T-SG A-172 $842 00536ES3ESA80MR A-271 $1,160
00518ET3YAL132SFF-W2 A-78; A-241 $1,011 00536ET3E184HP-W22 A-233 $1,084
00518ET3YAL132S-W22 A-76; A-109; A-239 $932 00536ET3E184JM-S A-203 $1,075
00518NT3FVD184TC-W22 A-107; A-258 $1,373 00536ET3E184JM-SG A-220 $1,264
00518OS1C184T A-24; A-153; A-170 $725 00536ET3E184JMV-S A-203 $1,247
00518OS1CCD184T A-24; A-153; A-170 $682 00536ET3E184JM-W22 A-203 $1,075
00518OS1CCDOL184T A-24 $721 00536ET3E184JP-S A-206 $1,094
00518OT3E184JM-S A-211 $849 00536ET3E184JP-SG A-221 $1,264
00518OT3E184JM-SG A-222 $1,019 00536ET3E184JP-W22 A-206 $1,094
00518OT3E184JMV-S A-214 $907 00536ET3E184TC-SG A-172 $963
00518OT3E184JP-S A-215 $848 00536ET3E184TC-W22 A-43 $911
00518OT3E184JP-SG A-223 $1,019 00536ET3E184T-S A-34 $760
00518OT3E184TC-S A-57 $668 00536ET3E184T-SG A-172 $930
00518OT3E184TC-SG A-176 $838 00536ET3E184T-SRT A-34; A-86 $810
00518OT3E184T-S A-51 $630 00536ET3E184T-W22 A-34 $873
00518OT3E184T-SG A-176 $800 00536ET3EAL132S-W22 A-76; A-239 $1,144
00518OT3H184JM-S A-211 $849 00536ET3EBM184T-W22 A-69; A-267 $2,343
00518OT3H184JM-SG A-222 $1,019 00536ET3EPM182/4Y-W2 A-189 $985
00518OT3H184JP-S A-215 $848 00536ET3ER184TC-S A-47 $793
00518OT3H184TC-S A-57 $668 00536ET3ER184TC-W22 A-47; A-95 $938
00518OT3H184T-S A-51 $630 00536ET3ESS184TC A-134 $1,779
00518OT3H184T-SG A-176 $800 00536ET3ESS184TCFL A-135 $1,779
00518OT3P184T-S A-51; A-264 $630 00536ET3H184JM-S A-203 $1,075
00518OT3V184JM-S A-211 $849 00536ET3H184JM-SG A-220 $1,264
00518OT3V184TC-S A-57 $668 00536ET3H184JM-W22 A-203 $1,075
00518OT3V184TC-SG A-176 $838 00536ET3H184JP-W22 A-206 $1,094
00518OT3V184T-S A-51 $630 00536ET3H184TC-S A-43; A-93 $793
00518OT3V184T-SG A-176 $800 00536ET3H184TC-W22 A-43; A-93 $911
00518ST3HIE184T-W22 A-62; A-97 $1,371 00536ET3H184T-S A-34 $760
00518ST3QIE184TC-W22 A-66; A-101 $1,436 00536ET3H184T-SG A-172 $930
00518ST3QIE184T-W22 A-62; A-97 $1,371 00536ET3H184T-W22 A-34; A-86 $873
00518ST3QIER184TC-W2 A-67; A-102 $1,478 00536ET3P184JM-S A-203 $1,075
00518XT3E184JP A-120 $1,609 00536ET3V184JM-S A-203 $1,075
00518XT3E184T A-115 $1,220 00536ET3YAL132SFF-W2 A-78; A-241 $1,223
00518XT3E184TC A-119 $1,385 00536ET3YAL132S-W22 A-76; A-239 $1,144
00518XT3ER184TC A-120; A-209 $1,409 00536OS1B184JM A-210 $1,383
00518XT3H184JP A-120; A-209 $1,609 00536OS1B184JP A-210 $1,383
00518XT3H184T A-115 $1,220 00536OS1B184T A-24; A-263 $863
00518XT3H184TC A-119 $1,385 00536OS1C184T A-24; A-263 $863
00526EP3QCT254VF1-W2 A-185 $2,424 00536OS1CCDW184Y-S A-24 $526
00526EP3QCT254V-W22 A-185 $2,424 00536OS1D184T A-24 $862
00536EG3E184T-W22 A-80 $960 00536OS1DCD56H-S A-24; A-26; A-263 $458
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-133
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
00718ES1E215TC A-21 $1,410 00718NT3FVD213TC-W22 A-107; A-258 $1,803
00718ES1EID215TC-W22 A-255 $1,471 00718OP3EFP213JPV-S A-228 $1,028
00718ES3ESA90LL A-271 $1,855 00718OP3HFP213JPV-S A-228 $1,028
00718ES3ESA90LR A-271 $1,855 00718OS1CCD215T A-24; A-26; A-152; A-155; A-263 $961
00718ET3E213HP-W22 A-233 $1,371 00718OS1F215T A-24; A-26; A-152; A-155; A-263 $961
00718ET3E213JM-S A-203 $1,519 00718OT3E213JM-S A-211 $1,119
00718ET3E213JM-SG A-220 $1,743 00718OT3E213JM-SG A-222 $1,320
00718ET3E213JM-W22 A-203 $1,519 00718OT3E213JMV-S A-214 $1,201
00718ET3E213JP-S A-207 $1,543 00718OT3E213JP-S A-215 $1,120
00718ET3E213JP-SG A-221 $1,743 00718OT3E213JP-SG A-223 $1,320
00718ET3E213JP-W22 A-207 $1,543 00718OT3E213TC-S A-57 $961
00718ET3E213TC-SG A-173 $1,194 00718OT3E213TC-SG A-177 $1,161
00718ET3E213TC-W22 A-43; A-93 $1,141 00718OT3E213T-S A-51 $910
00718ET3E213T-S A-35 $948 00718OT3E213T-SG A-177 $1,110
00718ET3E213T-SG A-173 $1,148 00718OT3H213JM-S A-211 $1,120
00718ET3E213T-W22 A-35; A-87 $1,089 00718OT3H213JM-SG A-222 $1,320
00718ET3EAL132M-W22 A-76; A-109; A-239 $1,110 00718OT3H213JP-S A-215 $1,120
00718ET3EBM213TC-S A-72; A-270 $4,702 00718OT3H213JP-SG A-223 $1,320
00718ET3EBM213T-S A-71; A-269 $4,563 00718OT3H213TC-S A-57 $961
00718ET3EBM213T-W22 A-69; A-267 $2,903 00718OT3H213T-S A-51 $910
00718ET3EBMR213TC-S A-72; A-270 $4,702 00718OT3H213T-SG A-177 $1,110
00718ET3ECT213TF1-W2 A-181 $1,293 00718OT3P213T-S A-51; A-264 $910
00718ET3ECT213T-W22 A-181 $1,293 00718OT3V213JM-S A-211 $1,119
00718ET3EID213TC-W22 A-255 $1,202 00718OT3V213JP-S A-215 $1,120
00718ET3EPM213/5Y-W2 A-189 $1,240 00718OT3V213JP-SG A-223 $1,320
00718ET3ER213TC-S A-47; A-95 $994 00718OT3V213TC-S A-57 $961
00718ET3ER213TC-W22 A-47 $1,175 00718OT3V213TC-SG A-177 $1,161
00718ET3ESS213TC A-134 $2,201 00718OT3V213T-SG A-177 $1,110
00718ET3ESS213TCFL A-135 $2,201 00718ST3HIE213T-W22 A-62; A-97 $1,646
00718ET3H213JM-S A-203 $1,519 00718ST3QIE213TC-W22 A-66; A-101 $1,726
00718ET3H213JM-SG A-220 $1,743 00718ST3QIE213T-W22 A-62; A-97 $1,646
00718ET3H213JM-W22 A-203 $1,519 00718ST3QIER213TC-W2 A-67; A-102 $1,776
00718ET3H213JP-S A-207 $1,543 00718XT3E213T A-116 $1,897
00718ET3H213JP-SG A-221 $1,743 00718XT3E213TC A-119 $2,080
00718ET3H213JP-W22 A-207 $1,543 00718XT3ER213TC A-120 $2,118
00718ET3H213TC-W22 A-43; A-93 $1,141 00718XT3H213T A-116 $1,897
00718ET3H213T-S A-35 $948 00718XT3H213TC A-119 $2,080
00718ET3H213T-SG A-173 $1,148 00726EP3QCT256V-W22 A-185 $2,496
00718ET3H213T-W22 A-35; A-87 $1,089 00736AP1DGD182TZ-S A-254 $1,296
00718ET3HCT213TF1-W2 A-181 $1,293 00736AP3EGD184TZ-S A-254 $933
00718ET3HCT213T-W22 A-181 $1,293 00736EG3E213T-W22 A-80 $1,238
00718ET3P213JM-S A-203 $1,519 00736ES1B213T A-20; A-22 $1,552
00718ET3P213T-S A-35 $948 00736ES1C213JM A-199 $1,641
00718ET3P213T-W22 A-35; A-87 $1,089 00736ES1C213JP A-200 $1,641
00718ET3PCT213TF1-W2 A-181 $1,293 00736ES1E213JM A-199 $1,641
00718ET3PCT213T-W22 A-181 $1,293 00736ES1E213JP A-200 $1,641
00718ET3V213JM-S A-203 $1,519 00736ES1E213T A-20 $1,548
00718ET3V213JP-S A-207 $1,543 00736ES1E213TC A-21 $1,598
00718ET3V213T-SG A-173 $1,148 00736ES3ESA80LL A-271 $1,642
00718ET3YAL132MFF-W2 A-78; A-241 $1,189 00736ES3ESA80LR A-271 $1,642
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-135
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
01012EG3E256T-W22 A-80 $2,636 01018ES1E215T A-20 $1,579
01012ES3EOW256T-W22 A-261 $2,070 01018ES1E215TC A-21 $1,633
01012ET3E256JM-S A-203 $2,979 01018ES1EID215TC-W22 A-255 $1,694
01012ET3E256JM-W22 A-203 $2,979 01018ES3ESA90LL A-271 $2,176
01012ET3E256JP-S A-207 $3,103 01018ES3ESA90LR A-271 $2,176
01012ET3E256JP-W22 A-207 $3,103 01018ET3E215HP-W22 A-233 $1,641
01012ET3E256TC-W22 A-43 $2,465 01018ET3E215JM-S A-203 $1,792
01012ET3E256T-S A-35; A-87 $2,088 01018ET3E215JM-SG A-220 $2,023
01012ET3E256T-SG A-173 $2,368 01018ET3E215JM-W22 A-203 $1,792
01012ET3E256T-W22 A-35; A-87 $2,396 01018ET3E215JP-S A-207 $1,823
01012ET3EBM256T-W22 A-69; A-267 $5,759 01018ET3E215JP-SG A-221 $2,023
01012ET3ECT256TF1-W2 A-181 $2,751 01018ET3E215JP-W22 A-207 $1,823
01012ET3ECT256T-W22 A-181 $2,751 01018ET3E215TC-S A-43; A-93 $1,354
01012ET3ER256TC-S A-47 $2,148 01018ET3E215TC-SG A-173 $1,354
01012ET3H256T-S A-35 $2,088 01018ET3E215TC-W22 A-44; A-93 $1,325
01012ET3H256T-SG A-173 $2,368 01018ET3E215T-S A-35 $1,110
01012ET3H256T-W22 A-35; A-87 $2,396 01018ET3E215T-SG A-173 $1,310
01012ET3HCT256T-W22 A-181 $2,751 01018ET3E215T-W22 A-35; A-87 $1,273
01012ET3PCT256T-W22 A-181 $2,751 01018ET3EBM215TC-S A-72; A-270 $5,128
01012OT3E256JM-S A-211 $2,298 01018ET3EBM215T-S A-71; A-269 $4,989
01012OT3E256JM-W40 A-211 $2,298 01018ET3EBM215T-W22 A-69; A-267 $3,474
01012OT3E256JP-S A-215 $2,298 01018ET3EBMR215TC-S A-72; A-270 $5,128
01012OT3E256JPV-S A-218 $2,396 01018ET3ECT215TF1-W2 A-181 $1,475
01012OT3E256JP-W40 A-215 $2,298 01018ET3ECT215T-W22 A-181 $1,475
01012OT3E256TC-S A-57 $1,785 01018ET3EID215TC-W22 A-255 $1,386
01012OT3E256TC-W40 A-57 $1,785 01018ET3EPM213/5Y-W2 A-189 $1,450
01012OT3E256T-S A-51; A-264 $1,717 01018ET3ER215TC-S A-47; A-95 $1,154
01012OT3E256T-SG A-177 $1,997 01018ET3ER215TC-W22 A-47 $1,366
01012OT3E256T-W40 A-51 $1,717 01018ET3ESS215TC A-134 $2,452
01012OT3H256TC-S A-57 $1,785 01018ET3ESS215TCFL A-135 $2,452
01012OT3H256TC-W40 A-57 $1,785 01018ET3H215JM-S A-203 $1,792
01012OT3H256T-S A-51 $1,717 01018ET3H215JM-SG A-220 $2,023
01012OT3H256T-SG A-177 $1,997 01018ET3H215JM-W22 A-203 $1,792
01012ST3HIE256T-W22 A-62; A-97 $2,834 01018ET3H215JP-S A-207 $1,823
01012ST3QIE256TC-W22 A-66; A-101 $2,954 01018ET3H215JP-SG A-221 $2,023
01012ST3QIE256T-W22 A-63; A-98 $2,834 01018ET3H215JP-W22 A-207 $1,823
01012XT3E256T A-116 $2,900 01018ET3H215TC-S A-44 $1,154
01012XT3H256T A-116 $2,900 01018ET3H215TC-W22 A-44; A-93 $1,325
01018AT3ECT215TF1-W2 A-184 $1,519 01018ET3H215T-S A-35 $1,110
01018AT3ECT215T-W22 A-184 $1,519 01018ET3H215T-SG A-173 $1,310
01018AT3HCT215TF1-W2 A-184 $1,519 01018ET3H215T-W22 A-35; A-87 $1,273
01018AT3HCT215T-W22 A-184 $1,519 01018ET3HBM215T-W22 A-69; A-267 $3,474
01018AT3PCT215TF1-W2 A-184 $1,519 01018ET3HCT215TF1-W2 A-181 $1,475
01018AT3PCT215T-W22 A-184 $1,519 01018ET3HCT215T-W22 A-181 $1,475
01018EG3EL215T-W22 A-80 $1,400 01018ET3HR215TC-S A-47 $1,154
01018EP3EHP215TYZ7F3 A-265 $1,244 01018ET3P215T-W22 A-35 $1,273
01018ES1C215JM A-199 $2,057 01018ET3PCT215TF1-W2 A-181 $1,475
01018ES1DFD215T A-20 $1,692 01018ET3PCT215T-W22 A-181 $1,475
01018ES1DFD215T-W22 A-252 $1,692 01018ET3V215JM-S A-203 $1,792
01018ES1E215JM A-199 $2,057 01018ET3V215JP-S A-207 $1,823
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-137
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
01036OT3H213JMV-S A-214 $1,371 01512ET3E284TS-W22 A-36; A-87 $3,291
01036OT3H213JP-S A-215 $1,289 01512ET3E284TS-W22G A-173 $3,601
01036OT3H213JP-SG A-223 $1,489 01512ET3E284T-W22 A-36; A-87 $3,291
01036OT3H213JPV-S A-218 $1,371 01512ET3E284T-W22G A-173 $3,601
01036OT3H213TC-S A-57 $1,132 01512ET3ECT284T-W22 A-181 $3,850
01036OT3H213T-S A-51; A-264 $1,081 01512ET3EPM284/6Y-W2 A-189 $3,652
01036OT3V213JM-S A-212 $1,289 01512ET3H284TC-W22 A-44; A-93 $3,388
01036OT3V213JMV-S A-214 $1,371 01512ET3H284TS-W22 A-36; A-87 $3,291
01036OT3V213JP-S A-215 $1,289 01512ET3H284TS-W22G A-173 $3,601
01036OT3V213JPV-S A-218 $1,371 01512ET3H284T-W22 A-36; A-87 $3,291
01036OT3V213TC-S A-57 $1,132 01512ET3PCT284T-W22 A-181 $3,850
01036ST3HIE215T-W22 A-63; A-98 $1,920 01512ET3Y180L-W22 A-76; A-109; A-239 $3,884
01036ST3QIE215TC-W22 A-66; A-101 $2,000 01512OT3E284JM-W40 A-212 $3,164
01036ST3QIE215T-W22 A-63; A-98 $1,920 01512OT3E284JPV-W40 A-218 $3,399
01036XT3E215T A-116 $1,727 01512OT3E284JP-W40 A-215 $3,163
01036XT3E215TC A-119 $1,803 01512OT3E284TC-W40 A-57 $2,497
01036XT3H215T A-116 $1,727 01512OT3E284T-W40 A-51; A-264 $2,412
01036XT3H215TC A-119 $1,803 01512OT3E284T-W40G A-177 $2,722
01089EP3HCT215VF1-W2 A-185 $1,891 01512OT3H284TC-W40 A-57 $2,497
01089EP3HCT215V-W22 A-185 $1,891 01512OT3H284T-W40 A-51 $2,412
01089EP3PCT215VF1-W2 A-185 $1,891 01512ST3HIE284T-W22 A-63; A-98 $4,203
01089EP3PCT215V-W22 A-185 $1,891 01512ST3QIE284TC-W22 A-66; A-101 $4,403
01089EP3PCT256V2F1-W A-185 $3,052 01512ST3QIE284T-W22 A-63; A-98 $4,203
01089EP3PCT256V2-W22 A-185 $3,052 01512XT3E284T A-116 $4,048
01089EP3QCT215VF1-W2 A-185 $1,891 01512XT3H284T A-116 $4,048
01089EP3QCT215V-W22 A-185 $1,891 01515EP3OFP254T-W22 A-230 $1,811
01089EP3QCT256V2F1-W A-185 $3,052 01518AT3ECT254TF1-W2 A-184 $2,186
01089EP3QCT256V2-W22 A-185 $3,052 01518AT3ECT254T-W22 A-184 $2,186
01109ET3Y180L-W22 A-76; A-239 $4,031 01518AT3HCT254TF1-W2 A-184 $2,186
01112ET3Y160L-W22 A-76; A-239 $3,160 01518AT3HCT254T-W22 A-184 $2,186
01118ET3Y160MFF-W22 A-78; A-241 $1,843 01518AT3PCT254TF1-W2 A-184 $2,186
01118ET3Y160M-W22 A-76; A-109; A-239 $1,726 01518AT3PCT254T-W22 A-184 $2,186
01136ET3Y160MFF-W22 A-78; A-241 $2,219 01518EG3E254T-W22 A-80 $2,033
01136ET3Y160M-W22 A-76; A-109; A-239 $2,102 01518ET3E254HP-W22 A-233 $2,463
01218ES1E215T A-20 $1,776 01518ET3E254JM-S A-203 $2,609
01218ES1E215TC A-21 $1,827 01518ET3E254JM-SG A-220 $2,933
01218ES1E215T-W22 A-252 $1,776 01518ET3E254JM-W22 A-204 $2,609
01218ES1EID215TC-W22 A-255 $1,888 01518ET3E254JP-S A-207 $2,653
01236ES1C215T A-20 $2,015 01518ET3E254JP-SG A-221 $2,933
01509ES3EOW324T-W22 A-261 $4,293 01518ET3E254JP-W22 A-207 $2,653
01509ET3E286T-W22 A-35 $5,368 01518ET3E254TC-SG A-173 $1,950
01509ET3H286T-W22 A-35; A-87 $5,368 01518ET3E254TC-W22 A-44; A-93 $1,917
01509ET3Y200L-W22 A-76; A-109; A-239 $5,158 01518ET3E254T-S A-36; A-87 $1,610
01509ST3QIE286TC-W22 A-66; A-101 $6,942 01518ET3E254T-SG A-173 $1,890
01509ST3QIE286T-W22 A-63; A-98 $6,742 01518ET3E254T-W22 A-36; A-87 $1,848
01509XT3E286T A-116 $7,102 01518ET3EBM254T-S A-71; A-269 $6,985
01512EG3E284T-W22 A-80 $3,620 01518ET3EBM254T-W22 A-69; A-267 $5,205
01512ES3EOW284T-W22 A-261 $2,679 01518ET3ECT254TF1-W2 A-181 $2,122
01512ET3E284JM-W22 A-203 $3,912 01518ET3ECT254T-W22 A-181 $2,122
01512ET3E284JP-W22 A-207 $3,972 01518ET3EID254TC-W22 A-255 $1,996
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-139
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
01536ET3E254T-W22 A-36; A-87 $1,824 01536OT3V215TC-S A-57 $1,543
01536ET3EBM254T-W22 A-69; A-267 $4,745 01536ST3HIE254T-W22 A-63; A-98 $2,428
01536ET3ER254TC-S A-47; A-95 $1,649 01536ST3QIE254TC-W22 A-66; A-101 $2,548
01536ET3ER254TC-W22 A-47 $1,950 01536ST3QIE254T-W22 A-63; A-98 $2,428
01536ET3H215JM-S A-204 $2,058 01536XT3E254T A-116 $2,387
01536ET3H215JM-SG A-220 $2,258 01536XT3E254TC A-119 $2,490
01536ET3H215JM-W22 A-204 $2,058 01536XT3H254T A-116 $2,387
01536ET3H215JP-S A-207 $2,099 01589EP3HCT254VF1-W2 A-186 $2,572
01536ET3H254JM-S A-204 $2,214 01589EP3HCT254V-W22 A-186 $2,572
01536ET3H254JM-SG A-220 $2,909 01589EP3PCT254VF1-W2 A-186 $2,572
01536ET3H254JM-W22 A-204 $2,214 01589EP3PCT254V-W22 A-186 $2,572
01536ET3H254JP-W22 A-207 $2,629 01589EP3PCT284V2F1-W A-186 $3,878
01536ET3H254TC-S A-44; A-93 $1,649 01589EP3PCT284V2-W22 A-186 $3,878
01536ET3H254TC-W22 A-44; A-93 $1,893 01589EP3QCT254VF1-W2 A-186 $2,572
01536ET3H254T-S A-36 $1,589 01589EP3QCT254V-W22 A-186 $2,572
01536ET3H254T-SG A-173 $1,869 01589EP3QCT284V2F1-W A-186 $3,878
01536ET3H254T-W22 A-36; A-87 $1,824 01589EP3QCT284V2-W22 A-186 $3,878
01536ET3V215JM-S A-204 $2,058 01809ET3Y225S/M-W22 A-76; A-109; A-239 $5,902
01536ET3V254JM-S A-204 $2,214 01812ET3Y200L-W22 A-76; A-109; A-239 $4,886
01536ET3V254JP-S A-207 $2,629 01818ET3Y180M-W22 A-76; A-109; A-239 $2,689
01536ET3Y160M-W22 A-76; A-109; A-239 $2,413 01836ET3Y160L-W22 A-76; A-109; A-239 $2,925
01536OP3EFP215JMV-S A-228 $1,617 02009ES3EOW326T-W22 A-261 $4,872
01536OP3EFP215JPV-S A-229 $1,617 02009ET3E286T-W22 A-36 $5,854
01536OP3EFP215TC-S A-227 $1,283 02009ET3E324T-W22 A-36; A-87 $6,339
01536OP3HFP215JMV-S A-228 $1,617 02009ET3H324T-W22 A-36; A-87 $6,339
01536OP3HFP215JPV-S A-229 $1,617 02009ST3QIE324TC-W22 A-66; A-101 $8,494
01536OP3VFP215JMV-S A-228 $1,617 02009ST3QIE324T-W22 A-63; A-98 $8,269
01536OP3VFP215JPV-S A-229 $1,617 02009XT3E324T A-116 $8,390
01536OP3VFP215TC-S A-227 $1,283 02012EG3E286T-W22 A-80 $4,358
01536OT3E215JM-S A-212 $1,707 02012ES3EOW286T-W22 A-261 $3,162
01536OT3E215JM-SG A-222 $1,907 02012ET3E286JM-W22 A-204 $4,940
01536OT3E215JMV-S A-214 $1,789 02012ET3E286JP-W22 A-207 $5,015
01536OT3E215JP-S A-216 $1,707 02012ET3E286TC-W22 A-44 $4,060
01536OT3E215JP-SG A-223 $1,907 02012ET3E286T-W22 A-36; A-87 $3,962
01536OT3E215JPV-S A-218 $1,789 02012ET3E286T-W22G A-173 $4,272
01536OT3E215TC-S A-57 $1,543 02012ET3ECT286T-W22 A-181 $4,635
01536OT3E215TC-SG A-177 $1,743 02012ET3EPM284/6Y-W2 A-189 $4,437
01536OT3E215T-S A-51 $1,492 02012ET3H286T-W22 A-36; A-87 $3,962
01536OT3E215T-SG A-177 $1,692 02012ET3H286T-W22G A-173 $4,272
01536OT3H215JM-S A-212 $1,707 02012ET3PCT286T-W22 A-181 $4,635
01536OT3H215JM-SG A-222 $1,907 02012OT3E286JM-W40 A-212 $3,872
01536OT3H215JMV-S A-214 $1,789 02012OT3E286JP-W40 A-216 $3,871
01536OT3H215JP-S A-216 $1,707 02012OT3E286TC-W40 A-57 $3,119
01536OT3H215JP-SG A-223 $1,907 02012OT3E286T-W40 A-51 $3,034
01536OT3H215JPV-S A-218 $1,789 02012OT3E286T-W40G A-177 $3,344
01536OT3H215TC-S A-57 $1,543 02012OT3H286TC-W40 A-57 $3,119
01536OT3H215T-S A-51 $1,492 02012OT3H286T-W40 A-51 $3,034
01536OT3V215JM-S A-212 $1,707 02012ST3HIE286T-W22 A-63; A-98 $4,773
01536OT3V215JMV-S A-214 $1,789 02012ST3QIE286TC-W22 A-66; A-101 $4,973
01536OT3V215JP-S A-216 $1,707 02012ST3QIE286T-W22 A-63; A-98 $4,773
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-141
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
02036ET3E256TC-SG A-173 $2,416 02036OT3H254JP-S A-216 $2,106
02036ET3E256TC-W22 A-44 $2,451 02036OT3H254JPV-S A-218 $2,204
02036ET3E256T-S A-36; A-87 $2,076 02036OT3H254JP-W40 A-216 $2,106
02036ET3E256T-SG A-173 $2,356 02036OT3H254TC-S A-58 $1,828
02036ET3E256T-W22 A-36; A-87 $2,382 02036OT3H254TC-W40 A-58 $1,828
02036ET3EBM256T-W22 A-69; A-267 $5,768 02036OT3H254T-S A-52; A-264 $1,760
02036ET3ER256TC-S A-47 $2,136 02036OT3H254T-W40 A-52 $1,760
02036ET3ER256TC-W22 A-47; A-95 $2,525 02036OT3V254JM-S A-212 $2,107
02036ET3H256JM-S A-204 $2,965 02036OT3V254JMV-S A-214 $2,205
02036ET3H256JM-SG A-220 $3,298 02036OT3V254JM-W40 A-212 $2,107
02036ET3H256JM-W22 A-204 $2,965 02036OT3V254JP-S A-216 $2,106
02036ET3H256JP-S A-208 $3,018 02036OT3V254JPV-S A-218 $2,204
02036ET3H256JP-W22 A-208 $3,018 02036OT3V254JP-W40 A-216 $2,106
02036ET3H256TC-S A-44; A-94 $2,136 02036ST3HIE256T-W22 A-63; A-98 $2,957
02036ET3H256TC-W22 A-44; A-94 $2,451 02036ST3QIE256TC-W22 A-66; A-101 $3,077
02036ET3H256T-S A-36 $2,076 02036ST3QIE256T-W22 A-63; A-98 $2,957
02036ET3H256T-SG A-173 $2,356 02036XT3E256T A-116 $3,083
02036ET3H256T-W22 A-36; A-87 $2,382 02036XT3H256T A-116 $3,083
02036ET3V256JM-S A-204 $2,965 02089EP3HCT256VF1-W2 A-186 $2,923
02036OP3EFP254JMV-S A-228 $2,092 02089EP3HCT256V-W22 A-186 $2,923
02036OP3EFP254JPV-S A-229 $2,092 02089EP3PCT256VF1-W2 A-186 $2,923
02036OP3EFP254TC-S A-227 $1,469 02089EP3PCT256V-W22 A-186 $2,923
02036OP3EFP254TC-W40 A-227 $1,469 02089EP3PCT286V2F1-W A-186 $4,827
02036OP3EFP254T-W40 A-223 $1,469 02089EP3PCT286V2-W22 A-186 $4,827
02036OP3HFP254JMV-S A-228 $2,092 02089EP3QCT256VF1-W2 A-186 $2,923
02036OP3HFP254JPV-S A-229 $2,092 02089EP3QCT256V-W22 A-186 $2,923
02036OP3HFP254TC-S A-227 $1,469 02089EP3QCT286V2F1-W A-186 $4,827
02036OP3HFP254TC-W40 A-227 $1,469 02089EP3QCT286V2-W22 A-186 $4,827
02036OP3VFP254JMV-S A-228 $2,092 02209ET3Y225S/M-W22 A-76; A-109; A-239 $7,506
02036OP3VFP254JPV-S A-229 $2,092 02212ET3Y200L-W22 A-76; A-109; A-239 $4,924
02036OP3VFP254TC-S A-227 $1,469 02218ET3Y180L-W22 A-76; A-109; A-239 $3,225
02036OP3VFP254TC-W40 A-227 $1,469 02236ET3Y180M-W22 A-76; A-109; A-239 $3,492
02036OT3E254JM-S A-212 $2,107 02509ET3E326T-W22 A-36 $7,315
02036OT3E254JM-SG A-222 $2,387 02509ET3H326T-W22 A-36; A-87 $7,315
02036OT3E254JMV-S A-214 $2,205 02509ST3QIE326TC-W22 A-66; A-101 $9,063
02036OT3E254JM-W40 A-212 $2,107 02509ST3QIE326T-W22 A-63; A-98 $8,838
02036OT3E254JP-S A-216 $2,106 02509XT3E326T A-116 $10,512
02036OT3E254JP-SG A-223 $2,387 02512AT3ECT324TF1-W2 A-184 $5,709
02036OT3E254JPV-S A-218 $2,204 02512AT3HCT324TF1-W2 A-184 $5,709
02036OT3E254JP-W40 A-216 $2,106 02512EG3E324T-W22 A-80 $5,211
02036OT3E254TC-S A-58 $1,828 02512ES3EOW324T-W22 A-261 $3,887
02036OT3E254TC-SG A-177 $2,108 02512ET3E324JM-W22 A-204 $5,546
02036OT3E254TC-W40 A-58 $1,828 02512ET3E324JP-W22 A-208 $5,972
02036OT3E254T-S A-52 $1,760 02512ET3E324TC-W22 A-44 $4,858
02036OT3E254T-SG A-177 $2,040 02512ET3E324T-W22 A-36; A-88 $4,737
02036OT3E254T-W40 A-52 $1,760 02512ET3E324T-W22G A-173 $5,137
02036OT3ECD254T-W40 A-264 $1,795 02512ET3ECT324T-W22 A-181 $5,543
02036OT3H254JM-S A-212 $2,107 02512ET3EPM324/6Y-W2 A-189 $5,353
02036OT3H254JM-SG A-222 $2,387 02512ET3H324T-W22 A-36; A-88 $4,737
02036OT3H254JMV-S A-214 $2,205 02512ET3H324T-W22G A-173 $5,137
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-143
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
02536OP3EFP256TC-S A-227 $1,783 02589EP3PCT324V2F1-W A-186 $5,826
02536OP3EFP256TC-W40 A-227 $1,783 02589EP3PCT324V2-W22 A-186 $5,826
02536OP3EFP256T-S A-225 $1,783 02589EP3QCT286VF1-W2 A-186 $4,199
02536OP3EFP256T-W40 A-225 $1,783 02589EP3QCT286V-W22 A-186 $4,199
02536OP3HFP256JMV-S A-228 $2,352 02589EP3QCT324V2F1-W A-186 $5,826
02536OP3HFP256JPV-S A-229 $2,518 02589EP3QCT324V2-W22 A-186 $5,826
02536OP3HFP256T-S A-225 $1,783 03009ET3E364T-W22 A-36; A-88 $11,215
02536OP3HFP256T-W40 A-225 $1,783 03009ET3Y250S/M-W22 A-76; A-109; A-239 $8,858
02536OP3VFP256JMV-S A-228 $2,352 03009ST3QIE364TC-W22 A-66; A-101 $13,524
02536OP3VFP256JPV-S A-229 $2,518 03009ST3QIE364T-W22 A-63; A-98 $13,149
02536OP3VFP256TC-S A-227 $1,783 03009XT3E364T A-116 $15,071
02536OP3VFP256TC-W40 A-227 $1,783 03012AT3PCT326TF1-W2 A-184 $6,246
02536OP3VFP256T-S A-225 $1,783 03012EG3E326T-W22 A-80 $5,800
02536OT3E256JM-S A-212 $2,598 03012ES3EOW326T-W22 A-261 $4,515
02536OT3E256JM-SG A-222 $2,879 03012ET3E326JM-W22 A-204 $6,686
02536OT3E256JMV-S A-214 $2,696 03012ET3E326JP-W22 A-208 $6,690
02536OT3E256JM-W40 A-212 $2,598 03012ET3E326TC-W22 A-44; A-94 $5,394
02536OT3E256JP-S A-216 $2,599 03012ET3E326TC-W22G A-173 $5,794
02536OT3E256JP-SG A-223 $2,879 03012ET3E326T-W22 A-36; A-88 $5,273
02536OT3E256JPV-S A-218 $2,697 03012ET3E326T-W22G A-173 $5,673
02536OT3E256JP-W40 A-216 $2,599 03012ET3ECT326T-W22 A-181 $6,064
02536OT3E256TC-S A-58 $2,207 03012ET3EPM324/6Y-W2 A-189 $5,906
02536OT3E256TC-SG A-177 $2,487 03012ET3ER326TSC-W22 A-47; A-95 $5,768
02536OT3E256TC-W40 A-58 $2,207 03012ET3H326T-W22 A-37; A-88 $5,273
02536OT3E256T-S A-52 $2,139 03012ET3H326T-W22G A-174 $5,673
02536OT3E256T-SG A-177 $2,419 03012ET3PCT326T-W22 A-181 $6,064
02536OT3E256T-W40 A-52 $2,139 03012ET3Y225S/M-W22 A-76; A-109; A-239 $7,689
02536OT3ECD256T-W40 A-264 $2,182 03012OT3E326JM-W40 A-212 $4,741
02536OT3H256JM-S A-212 $2,598 03012OT3E326JP-W40 A-216 $4,980
02536OT3H256JM-SG A-222 $2,879 03012OT3E326TC-W40 A-58 $3,990
02536OT3H256JMV-S A-214 $2,696 03012OT3E326T-W40 A-52 $3,890
02536OT3H256JM-W40 A-212 $2,598 03012OT3E326T-W40G A-177 $4,290
02536OT3H256JP-S A-216 $2,599 03012OT3H326T-W40 A-52 $3,890
02536OT3H256JPV-S A-218 $2,697 03012ST3HIE326T-W22 A-63; A-98 $5,359
02536OT3H256JP-W40 A-216 $2,599 03012ST3QIE326TC-W22 A-66; A-101 $5,584
02536OT3H256TC-S A-58 $2,207 03012ST3QIE326T-W22 A-63; A-98 $5,359
02536OT3H256TC-W40 A-58 $2,207 03012XT3E326T A-116 $6,196
02536OT3H256T-S A-52; A-264 $2,139 03012XT3H326T A-116 $6,196
02536OT3H256T-W40 A-52 $2,139 03015EP3OFP286TS-W22 A-231 $3,159
02536OT3V256JMV-S A-214 $2,696 03018AT3ECT286TF1-W2 A-184 $3,850
02536OT3V256JP-S A-216 $2,599 03018AT3ECT286T-W22 A-184 $3,850
02536OT3V256JPV-S A-218 $2,697 03018AT3HCT286TF1-W2 A-184 $3,850
02536OT3V256JP-W40 A-216 $2,599 03018AT3HCT286T-W22 A-184 $3,850
02536ST3HIE284TS-W22 A-63; A-98 $3,368 03018AT3PCT286TF1-W2 A-184 $3,850
02536ST3QIE284TSC-W2 A-66; A-101 $3,568 03018AT3PCT286T-W22 A-184 $3,850
02536ST3QIE284TS-W22 A-63; A-98 $3,368 03018EG3E286T-W22 A-80 $3,545
02536XT3E284TS A-116 $4,188 03018ET3E286HPH-W22 A-233 $3,967
02536XT3H284TS A-116 $4,188 03018ET3E286HP-W22 A-233 $3,967
02589EP3HCT286VF1-W2 A-186 $4,199 03018ET3E286JM-W22 A-204 $4,096
02589EP3HCT286V-W22 A-186 $4,199 03018ET3E286JP-W22 A-208 $4,167
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-145
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
03036OT3V284TSC-W40 A-58 $2,572 04018AT3HCT324T-W22 A-184 $4,949
03036OT3V284TS-W40 A-52 $2,487 04018AT3PCT324TF1-W2 A-184 $4,949
03036ST3HIE286TS-W22 A-63; A-98 $3,799 04018AT3PCT324T-W22 A-184 $4,949
03036ST3QIE286TSC-W2 A-66; A-101 $3,999 04018EG3E324T-W22 A-80 $4,596
03036ST3QIE286TS-W22 A-63; A-98 $3,799 04018ET3E324HP-W22 A-233 $5,247
03036XT3E286TS A-116 $4,262 04018ET3E324JM-W22 A-204 $5,316
03036XT3H286TS A-116 $4,262 04018ET3E324JP-W22 A-208 $5,413
03089EP3HCT324VF1-W2 A-186 $4,725 04018ET3E324TC-W22 A-44; A-94 $4,300
03089EP3HCT324V-W22 A-187 $4,725 04018ET3E324TSC-W22 A-44; A-94 $4,300
03089EP3PCT324VF1-W2 A-187 $4,725 04018ET3E324TS-W22 A-37; A-88 $4,178
03089EP3PCT324V-W22 A-187 $4,725 04018ET3E324T-W22 A-37; A-88 $4,178
03089EP3PCT326V2F1-W A-187 $6,995 04018ET3E324T-W22G A-174 $4,578
03089EP3PCT326V2-W22 A-187 $6,995 04018ET3ECT324TF1-W2 A-182 $4,805
03089EP3QCT324VF1-W2 A-187 $4,725 04018ET3ECT324T-W22 A-182 $4,805
03089EP3QCT324V-W22 A-187 $4,725 04018ET3EPM324/6Y-W2 A-189 $4,638
03089EP3QCT326V2F1-W A-187 $6,995 04018ET3ER324TC-W22 A-47; A-95 $4,429
03089EP3QCT326V2-W22 A-187 $6,995 04018ET3H324JM-W22 A-205 $5,316
03709ET3Y280S/M-W22 A-77; A-109; A-240 $11,751 04018ET3H324JP-W22 A-208 $5,413
03712ET3Y250S/M-W22 A-77; A-109; A-240 $9,947 04018ET3H324TC-W22 A-44; A-94 $4,300
03718ET3Y225S/M-W22 A-77; A-109; A-240 $6,984 04018ET3H324T-W22 A-37; A-88 $4,178
03736ET3Y200L-W22 A-77; A-109; A-240 $5,487 04018ET3H324T-W22G A-174 $4,578
04009ET3E365T-W22 A-37; A-88 $12,194 04018ET3HCT324TF1-W2 A-182 $4,805
04009ST3QIE365TC-W22 A-67; A-102 $15,284 04018ET3HCT324T-W22 A-182 $4,805
04009ST3QIE365T-W22 A-63; A-98 $14,909 04018ET3P324T-W22 A-37; A-88 $4,178
04009XT3E365T A-116 $15,505 04018ET3PCT324TF1-W2 A-182 $4,805
04012EG3E364T-W22 A-80 $8,012 04018ET3PCT324T-W22 A-182 $4,805
04012ES3EOW365T-W22 A-261 $6,290 04018ET3V324T-W22G A-174 $4,578
04012ET3E364JM-W22 A-204 $8,807 04018OP3EFP324JMV-W4 A-228 $3,621
04012ET3E364JP-W22 A-208 $9,268 04018OP3EFP324JPV-W4 A-229 $3,987
04012ET3E364TC-W22 A-44; A-94 $7,576 04018OP3EFP324TC-W40 A-227 $2,752
04012ET3E364T-W22 A-37; A-88 $7,284 04018OP3EFP324TS-W40 A-225 $2,652
04012ET3E364T-W22G A-174 $8,124 04018OP3HFP324JMV-W4 A-228 $3,621
04012ET3ECT364T-W22 A-182 $8,376 04018OP3HFP324JPV-W4 A-229 $3,621
04012ET3H364T-W22 A-37; A-88 $7,284 04018OP3HFP324TS-W40 A-225 $2,652
04012ET3H364T-W22G A-174 $8,124 04018OP3VFP324JPV* A-229 $3,987
04012ET3PCT364T-W22 A-182 $8,376 04018OP3VFP324JPV-W4 A-229 $3,987
04012OT3E364JM-W40 A-212 $6,696 04018OP3VFP324TS-W40 A-225 $2,652
04012OT3E364JP-W40 A-216 $7,444 04018OT3E324JMV-W40 A-214 $4,431
04012OT3E364TC-W40 A-58 $5,938 04018OT3E324JM-W40 A-212 $3,797
04012OT3E364T-W40 A-52 $5,544 04018OT3E324JPV-W40 A-218 $4,077
04012OT3E364T-W40G A-178 $6,384 04018OT3E324JP-W40 A-216 $3,797
04012OT3H364T-W40 A-52 $5,544 04018OT3E324TC-W40 A-58 $3,195
04012ST3HIE364T-W22 A-63; A-98 $8,636 04018OT3E324TC-W40G A-178 $3,595
04012ST3QIE364TC-W22 A-67; A-102 $9,011 04018OT3E324TSC-W40 A-58 $3,195
04012ST3QIE364T-W22 A-63; A-98 $8,636 04018OT3E324TS-W40 A-53 $3,095
04012XT3E364T A-116 $10,576 04018OT3E324TS-W40G A-178 $3,372
04012XT3H364T A-117 $10,576 04018OT3E324T-W40 A-53 $3,095
04015EP3OFP324TS-W22 A-231 $3,969 04018OT3E324T-W40G A-178 $3,495
04018AT3ECT324TF1-W2 A-184 $4,949 04018OT3H324JM-W40 A-213 $3,797
04018AT3ECT324T-W22 A-184 $4,949 04018OT3H324JP-W40 A-216 $3,797
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-147
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
05012ET3E365T-W22G A-174 $9,358 05018OT3E326JM-W40 A-213 $4,877
05012ET3ECT365T-W22 A-182 $9,625 05018OT3E326JPV-W40 A-218 $5,190
05012ET3H365T-W22 A-37; A-88 $8,518 05018OT3E326JP-W40 A-216 $4,878
05012ET3H365T-W22G A-174 $9,358 05018OT3E326TC-G* A-178 $4,288
05012ET3PCT365T-W22 A-182 $9,625 05018OT3E326TC-W40 A-58 $3,888
05012OT3E365JM-W40 A-213 $7,666 05018OT3E326TC-W40G A-178 $4,288
05012OT3E365JP-W40 A-216 $7,666 05018OT3E326TSC-W40 A-58 $3,888
05012OT3E365TC-W40 A-58 $6,786 05018OT3E326TS-W40 A-53 $3,788
05012OT3E365T-W40 A-53 $6,392 05018OT3E326T-W40 A-53 $3,788
05012OT3E365T-W40G A-178 $7,232 05018OT3E326T-W40G A-178 $4,188
05012OT3V365T-W40 A-53 $6,392 05018OT3G326TS-W40 A-53 $3,788
05012ST3HIE365T-W22 A-63; A-98 $9,369 05018OT3H326JMV-W40 A-214 $5,189
05012ST3QIE365TC-W22 A-67; A-102 $9,744 05018OT3H326JM-W40 A-213 $4,877
05012ST3QIE365T-W22 A-64; A-99 $9,369 05018OT3H326JP-W40 A-217 $4,878
05012XT3E365T A-117 $10,597 05018OT3H326TC-W40 A-58 $3,888
05012XT3H365T A-117 $10,597 05018OT3H326TS-W40 A-53 $3,788
05015EP3OFP326TS-W22 A-231 $4,845 05018OT3H326T-W40 A-53 $3,788
05018AT3ECT326T-W22 A-184 $6,041 05018OT3H326T-W40G A-178 $4,188
05018AT3HCT326T-W22 A-184 $6,041 05018OT3P326T-W40 A-53 $3,788
05018AT3PCT326T-W22 A-184 $6,041 05018OT3V326JPV-W40 A-218 $5,190
05018EG3E326T-W22 A-80 $5,610 05018OT3V326TS-W40 A-53 $3,788
05018ET3E326HP-W22 A-233 $6,009 05018OT3V326T-W40G A-178 $4,188
05018ET3E326JM-W22 A-205 $6,513 05018ST3HIE326T-W22 A-64; A-99 $5,233
05018ET3E326JP-W22 A-208 $6,624 05018ST3QIE326TC-W22 A-67; A-102 $5,458
05018ET3E326JP-W22G A-221 $7,024 05018ST3QIE326T-W22 A-64; A-99 $5,233
05018ET3E326TC-W22 A-44; A-94 $5,221 05018XT3E326T A-117 $6,545
05018ET3E326TSC-W22 A-44; A-94 $5,221 05018XT3E326TC A-120 $7,084
05018ET3E326TS-W22 A-37; A-88 $5,100 05018XT3ER326TC A-120 $7,215
05018ET3E326T-W22 A-37; A-88 $5,100 05018XT3H326T A-117 $6,545
05018ET3E326T-W22G A-174 $5,500 05026EP3QCT365VF1-W2 A-187 $11,051
05018ET3ECT326TF1-W2 A-182 $5,865 05026EP3QCT365V-W22 A-187 $11,051
05018ET3ECT326T-W22 A-182 $5,865 05030EP3OFP326TS-W22 A-231 $5,050
05018ET3EPM324/6Y-W2 A-189 $5,661 05036EG3E326TS-W22 A-80 $5,848
05018ET3ER326TC-W22 A-47; A-95 $5,378 05036ET3E324HP-W22 A-233 $6,461
05018ET3H326JM-W22 A-205 $6,513 05036ET3E326HP-W22 A-233 $6,681
05018ET3H326JP-W22 A-208 $6,624 05036ET3E326JM-W22 A-205 $6,622
05018ET3H326TC-W22 A-44; A-94 $5,221 05036ET3E326JP-W22 A-208 $6,733
05018ET3H326T-W22 A-37; A-88 $5,100 05036ET3E326TSC-W22 A-44; A-94 $5,437
05018ET3H326T-W22G A-174 $5,500 05036ET3E326TS-W22 A-37; A-88 $5,316
05018ET3HCT326TF1-W2 A-182 $5,865 05036ET3E326TS-W22G A-174 $5,716
05018ET3HCT326T-W22 A-182 $5,865 05036ET3H326JP-W22 A-208 $6,733
05018ET3PCT326T-W22 A-182 $5,865 05036ET3H326TS-W22 A-37; A-88 $5,316
05018ET3V326T-W22G A-174 $5,500 05036ET3H326TS-W22G A-174 $5,716
05018OP3EFP326JMV-W4 A-228 $4,393 05036OP3EFP324JMV-W4 A-228 $4,394
05018OP3EFP326JPV-W4 A-229 $4,500 05036OP3EFP324JPV* A-230 $4,372
05018OP3EFP326TC-W40 A-227 $3,135 05036OP3EFP324JPV-W4 A-230 $4,372
05018OP3EFP326TS-W40 A-225 $3,015 05036OP3EFP324TSC-W4 A-227 $3,184
05018OP3HFP326JMV-W4 A-228 $4,527 05036OP3EFP324TS-W40 A-225 $3,184
05018OP3HFP326JPV-W4 A-229 $4,394 05036OP3HFP324JMV* A-228 $4,394
05018OP3VFP326JPV-W4 A-230 $4,500 05036OP3HFP324JMV-W4 A-228 $4,394
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-149
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
06018OT3E364JP-W40 A-217 $5,994 06036OP3VFP326JMV-W4 A-228 $5,171
06018OT3E364TC-W40 A-58 $4,837 06036OP3VFP326JPV* A-230 $5,105
06018OT3E364TC-W40G A-178 $5,677 06036OP3VFP326JPV-W4 A-230 $5,105
06018OT3E364TS-W40 A-53 $4,443 06036OP3VFP326TS* A-225 $4,008
06018OT3E364T-W40 A-53 $4,443 06036OP3VFP326TS-W40 A-225 $4,008
06018OT3E364T-W40G A-178 $5,283 06036OT3E326JM-W40 A-213 $5,432
06018OT3G364JM-W40 A-213 $5,994 06036OT3E326JPV* A-219 $5,761
06018OT3G364JP-W40 A-217 $5,994 06036OT3E326JPV-W40 A-219 $5,761
06018OT3G364TS-W40 A-53 $4,443 06036OT3E326JP-W40 A-217 $5,432
06018OT3G364T-W40 A-53 $4,443 06036OT3E326TSC* A-58 $4,681
06018OT3H364JM-W40 A-213 $5,994 06036OT3E326TSC-W40 A-58 $4,681
06018OT3H364JP-W40 A-217 $5,994 06036OT3E326TS-W40 A-53 $4,581
06018OT3H364TC-W40 A-58 $4,837 06036OT3E326TS-W40G A-178 $4,858
06018OT3H364TS-W40 A-53 $4,443 06036OT3G326JM-W40 A-213 $5,432
06018OT3H364T-W40 A-53 $4,443 06036OT3G326JP-W40 A-217 $5,432
06018OT3H364T-W40G A-178 $5,283 06036OT3G326TS-W40 A-53 $4,581
06018OT3V364JPV-W40 A-219 $6,365 06036OT3H326JMV-W40 A-214 $5,761
06018OT3V364TS-W40 A-53 $4,443 06036OT3H326JM-W40 A-213 $5,432
06018ST3HIE364T-W22 A-64; A-99 $8,044 06036OT3H326JP-W40 A-217 $5,432
06018ST3QIE364T-W22 A-64; A-99 $8,044 06036OT3H326TS-W40 A-53 $4,581
06018XT3E364T A-117 $10,460 06036OT3V326JPV* A-219 $5,761
06018XT3E364TC A-120 $11,116 06036OT3V326JPV-W40 A-219 $5,761
06018XT3H364T A-117 $10,460 06036OT3V326JP-W40 A-217 $5,432
06030EP3OFP364TS-W22 A-231 $7,174 06036OT3V326TS-W40 A-53 $4,581
06036EG3E364TS-W22 A-80 $8,307 06036ST3HIE364TS-W22 A-64; A-99 $8,665
06036ET3E326HP-W22 A-233 $8,632 06036ST3QIE364TS-W22 A-64; A-99 $8,665
06036ET3E326JM-W22 A-205 $7,699 06036XT3E364TS A-117 $9,988
06036ET3E326JP-W22 A-208 $7,853 06036XT3H364TS A-117 $9,988
06036ET3E364HP-W22 A-233 $9,484 06089EP3PCT365VF1-W2 A-187 $11,068
06036ET3E364JM-W22 A-205 $8,261 06089EP3PCT365V-W22 A-187 $11,068
06036ET3E364JP-W22 A-208 $10,252 06089EP3QCT365VF1-W2 A-187 $11,068
06036ET3E364TSC-W22 A-45; A-94 $7,994 06089EP3QCT365V-W22 A-187 $11,068
06036ET3E364TS-W22 A-37; A-88 $7,552 07509ET3E444T-W22 A-37; A-88 $23,334
06036ET3E364TS-W22G A-174 $8,392 07509ET3GKD444T-W22 A-105 $23,334
06036ET3G364TS-W22 A-37; A-88 $7,552 07509ET3QRB444TF2-W2 A-81 $23,334
06036ET3H364JM-W22 A-205 $8,261 07509ET3Y315S/M-W22 A-77; A-109; A-240 $18,647
06036ET3H364JP-W22 A-208 $10,252 07509ST3QIE444T-W22 A-64; A-99 $23,457
06036ET3H364TSC-W22 A-45; A-94 $7,994 07509XT3E444T A-117 $29,094
06036ET3H364TS-W22 A-37; A-88 $7,552 07512EG3E405T-W22 A-80 $13,264
06036ET3H364TS-W22G A-174 $8,392 07512ES3EOW444T-W22 A-261 $14,976
06036OP3EFP326JMV-W4 A-228 $5,171 07512ET3E405JP-W22 A-208 $14,005
06036OP3EFP326JPV* A-230 $5,105 07512ET3E405T-W22 A-37; A-88 $12,058
06036OP3EFP326JPV-W4 A-230 $5,105 07512ET3E405T-W22G A-174 $13,258
06036OP3EFP326TSC-W4 A-227 $4,448 07512ET3ECT405T-W22 A-182 $13,626
06036OP3EFP326TS-W40 A-225 $4,008 07512ET3ERB405T-W22 A-38; A-89 $12,058
06036OP3HFP326JMV* A-228 $5,305 07512ET3G405T-W22 A-38; A-89 $12,058
06036OP3HFP326JMV-W4 A-228 $5,305 07512ET3GRB405T-W22 A-38; A-89; A-105 $12,058
06036OP3HFP326JPV* A-230 $5,105 07512ET3H405TC-W22 A-45; A-94 $12,549
06036OP3HFP326JPV-W4 A-230 $5,105 07512ET3H405T-W22 A-38; A-89 $12,058
06036OP3HFP326TS-W40 A-225 $4,008 07512ET3H405T-W22G A-174 $13,258
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-151
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
07536OT3H364TS-W40 A-54 $5,799 10018ET3E405T-W22 A-38; A-89 $11,689
07536OT3V364JPV-W40 A-219 $8,121 10018ET3E405T-W22G A-174 $12,889
07536OT3V364JP-W40 A-217 $7,699 10018ET3ECT405T-W22 A-182 $13,092
07536OT3V364TS-W40 A-54 $5,799 10018ET3ERB405T-W22 A-38; A-89 $11,689
07536ST3HIE365TS-W22 A-64; A-99 $10,210 10018ET3G405HPH-W22 A-234 $11,222
07536ST3QIE365TS-W22 A-64; A-99 $10,210 10018ET3G405HP-W22 A-234 $11,222
07536XT3E365TS A-117 $11,285 10018ET3G405JM-W22 A-205 $12,300
07536XT3H365TS A-117 $11,285 10018ET3G405JP-W22 A-209 $12,411
07589EP3PCT404VF1-W2 A-187 $14,226 10018ET3G405T-W22 A-38; A-89 $11,689
07589EP3PCT404V-W22 A-187 $14,226 10018ET3GRB405T-W22 A-38; A-89; A-105 $11,689
07589EP3QCT404VF1-W2 A-187 $14,226 10018ET3H405TC-W22 A-45; A-94 $12,179
07589EP3QCT404V-W22 A-187 $14,226 10018ET3H405T-W22 A-38; A-89 $11,689
09009ET3Y315S/M-W22 A-77; A-109; A-240 $21,288 10018ET3H405T-W22G A-174 $12,889
09012ET3Y315S/M-W22 A-77; A-109; A-240 $19,448 10018ET3HRB405T-W22 A-38; A-89; A-105 $11,689
09018ET3Y280S/M-W22 A-77; A-110; A-240 $15,220 10018ET3PCT405T-W22 A-182 $13,092
09036ET3Y280S/M-W22 A-77; A-110; A-240 $16,720 10018OP3EFP404JPV* A-230 $8,825
10009ET3E445T-W22 A-38; A-89 $26,988 10018OP3EFP404JPV-W4 A-230 $8,825
10009ET3G445T-W22 A-38; A-89 $26,988 10018OP3EFP404TC-W40 A-227 $6,510
10009ET3GKD445T-W22 A-105 $26,988 10018OP3EFP404TS-W40 A-225 $6,065
10009ST3QIE445T-W22 A-64; A-99 $24,681 10018OP3EFP404T-W40 A-225 $6,065
10009ST3QIERB445T-W2 A-64; A-99 $24,681 10018OP3HFP404TC-W40 A-227 $6,510
10009XT3E445T A-117 $31,191 10018OP3HFP404TS-W40 A-226 $6,065
10009XT3G445T A-117 $31,191 10018OP3VFP404JPV-W4 A-230 $8,825
10012EG3E444T-W22 A-80 $17,194 10018OP3VFP404TC-W40 A-227 $6,510
10012ES3EOW445T-W22 A-261 $18,074 10018OP3VFP404TS-W40 A-226 $6,065
10012ET3E444T-W22 A-38; A-89 $15,631 10018OT3E404JPV-W40 A-219 $9,237
10012ET3E444T-W22G A-174 $17,181 10018OT3E404JP-W40 A-217 $8,783
10012ET3ECT444T-W22 A-182 $17,194 10018OT3E404TC-W40 A-59 $7,587
10012ET3ERB444T-W22 A-38; A-89 $15,631 10018OT3E404TSC-W40 A-59 $7,587
10012ET3G444T-W22 A-38; A-89 $15,631 10018OT3E404TS-W40 A-54 $7,141
10012ET3GRB444T-W22 A-38; A-89; A-105 $15,631 10018OT3E404TS-W40G A-178 $7,751
10012ET3H444T-W22 A-38; A-89 $15,631 10018OT3E404T-W40 A-54 $7,141
10012ET3H444T-W22G A-174 $17,181 10018OT3E404T-W40G A-178 $8,341
10012ET3PCT444T-W22 A-182 $17,194 10018OT3ERB404T-W40 A-54 $7,141
10012OT3E444T-W40 A-54 $11,863 10018OT3G404JP-W40 A-217 $8,783
10012OT3E444T-W40G A-178 $13,463 10018OT3G404TS-W40 A-54 $7,141
10012OT3G444T-W40 A-54 $11,863 10018OT3G404T-W40 A-54 $7,141
10012ST3HIE444T-W22 A-64; A-99 $17,933 10018OT3GRB404T-W40 A-54 $7,141
10012ST3QIE444T-W22 A-64; A-99 $17,933 10018OT3H404TC-W40 A-59 $7,587
10012ST3QIERB444T-W2 A-64; A-99 $17,933 10018OT3H404TSC-W40 A-59 $7,587
10012XT3E444T A-117 $21,032 10018OT3H404T-W40 A-54 $7,141
10012XT3G444T A-117 $21,032 10018OT3H404T-W40G A-178 $8,341
10015EP3OFP405TS-W22 A-231 $11,105 10018OT3V404JPV-W40 A-219 $9,237
10018EG3E405T-W22 A-80 $12,858 10018OT3V404TS-W40 A-54 $7,141
10018ET3E405HPH-W22 A-233 $11,222 10018ST3HIE405T-W22 A-64; A-99 $12,471
10018ET3E405HP-W22 A-233 $11,222 10018ST3HIERB405T-W2 A-64; A-99 $12,471
10018ET3E405JM-W22 A-205 $12,300 10018ST3QIE405T-W22 A-64; A-99 $12,471
10018ET3E405JP-W22 A-209 $12,411 10018ST3QIERB405T-W2 A-64; A-99 $12,471
10018ET3E405TC-W22 A-45; A-94 $12,179 10018XT3E405T A-117 $14,206
10018ET3E405TSC-W22 A-45; A-94 $12,179 10018XT3E405TC A-120 $14,993
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-153
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
12518OT3H405T-W40G A-178 $9,181 15015EP3OFP445TS-W22 A-231 $16,549
12518ST3HIE444T-W22 A-64; A-99 $16,564 15018EG3G445T-W22 A-81 $19,162
12518ST3QIE444T-W22 A-64; A-99 $16,564 15018ET3E445TC-W22 A-45; A-94 $18,025
12518ST3QIERB444T-W2 A-64; A-99 $16,564 15018ET3E445TC-W22G A-175 $19,575
12518XT3E444T A-117 $19,961 15018ET3E445T-W22 A-39; A-90; A-105 $17,420
12518XT3G444T A-117 $19,961 15018ET3G445HP-W22 A-234 $17,845
12530EP3OFP444TS-W22 A-231 $14,583 15018ET3G445TC-W22 A-45; A-94 $18,025
12536EG3G444TS-W22 A-81 $16,885 15018ET3G445TC-W22G A-175 $19,575
12536ET3E444TS-W22 A-39; A-90; A-105 $15,350 15018ET3G445TS-W22 A-39; A-90 $17,420
12536ET3E444TS-W22G A-175 $16,900 15018ET3G445T-W22 A-39; A-90 $17,420
12536ET3G444HP-W22 A-234 $17,969 15018ET3GRB445T-W22 A-39; A-90 $17,420
12536ET3G444TS-W22 A-39; A-90 $15,350 15018ET3H445T-W22 A-39; A-90 $17,420
12536ET3H444TS-W22 A-39; A-90 $15,350 15018ET3HRB445T-W22 A-39; A-90; A-105 $17,420
12536ET3H444TS-W22G A-175 $16,900 15018ET3Y315S/M-W22 A-77; A-110; A-240 $21,772
12536OP3EFP404TS-W40 A-226 $7,762 15018OP3EFP444TS-W40 A-226 $8,891
12536OP3GFP404TS-W40 A-226 $7,762 15018OP3GFP444TS-W40 A-226 $8,891
12536OP3HFP404TS-W40 A-226 $7,762 15018OP3HFP444TS-W40 A-226 $8,891
12536OP3JFP404TS-W40 A-226 $7,762 15018OT3G444TC-W40 A-59 $11,228
12536OP3VFP404TS-W40 A-226 $7,762 15018OT3G444TSC-W40 A-59 $11,228
12536OT3E404TS-W40 A-54 $8,826 15018OT3G444TS-W40 A-54 $10,668
12536OT3E404TS-W40G A-178 $10,026 15018OT3G444T-W40 A-54 $10,668
12536OT3G404JP-W40 A-217 $10,563 15018OT3GRB444T-W40 A-54 $10,668
12536OT3G404TS-W40 A-54 $8,826 15018OT3H444TC-W40 A-59 $11,228
12536OT3H404TS-W40 A-54 $8,826 15018OT3H444T-W40 A-54 $10,668
12536ST3HIE444TS-W22 A-64; A-99 $18,198 15018ST3HIE445T-W22 A-65; A-100 $18,587
12536ST3QIE444TS-W22 A-64; A-99 $18,198 15018ST3HIERB445T-W2 A-65; A-100 $18,587
12536XT3G444TS A-117 $20,874 15018ST3QIE445T-W22 A-65; A-100 $18,587
13209ET3Y315L-W22 A-77; A-110; A-240 $33,687 15018ST3QIERB445T-W2 A-65; A-100 $18,587
1321007139** A-129; A-131 $1,696 15018XT3E445T A-118 $21,557
1321007140** A-130; A-132 $1,676 15018XT3G445T A-118 $21,557
1321087139** A-129; A-131 $1,696 15018XT3H445T A-118 $21,557
1321087140** A-130; A-132 $1,676 15030EP3OFP445TS-W22 A-231 $17,938
13212ET3Y315S/M-W22 A-77; A-110; A-240 $25,642 15036EG3G445TS-W22 A-81 $20,770
13218ET3Y315S/M-W22 A-77; A-110; A-240 $19,732 15036ET3E445TS-W22 A-39; A-90 $18,882
13236ET3Y315S/M-W22 A-77; A-110; A-240 $23,180 15036ET3G445HP-W22 A-234 $20,517
15009ET3G449T-W22 A-39; A-90 $30,677 15036ET3G445TS-W22 A-39; A-90; A-105 $18,882
15009ET3GKD447T-W22 A-105 $30,677 15036ET3Y315S/M-W22 A-77; A-110; A-240 $26,249
15009ST3QIE447T-W22 A-64; A-99 $34,755 15036OP3EFP405TS-W40 A-226 $10,042
15009ST3QIERB447T-W2 A-64; A-99 $34,755 15036OP3GFP405TS-W40 A-226 $10,042
15012EG3G449T-W22 A-81 $22,703 15036OP3HFP405TS-W40 A-226 $10,042
15012ET3E447T-W22 A-39; A-90 $20,639 15036OP3JFP405TS-W40 A-226 $10,042
15012ET3G447T-W22 A-39; A-90 $20,639 15036OP3VFP405TS-W40 A-226 $10,042
15012ET3GRB447T-W22 A-39; A-90 $20,639 15036OT3G405JP-W40 A-217 $13,922
15012ET3H447T-W22 A-39; A-90 $20,639 15036OT3G405TSC-W40 A-59 $11,862
15012ET3Y315L-W22 A-77; A-110; A-240 $28,298 15036OT3G405TS-W40 A-54 $11,416
15012OT3G445T-W40 A-54 $13,615 15036OT3G405TS-W40G A-178 $12,616
15012ST3HIE447T-W22 A-65; A-100 $23,181 15036OT3H405TS-W40 A-54 $11,416
15012ST3QIE447T-W22 A-65; A-100 $23,181 15036ST3HIE445TS-W22 A-65; A-100 $21,433
15012ST3QIERB447T-W2 A-65; A-100 $23,181 15036ST3QIE445TS-W22 A-65; A-100 $21,433
15012XT3G447T A-117 $32,370 15036XT3G445TS A-118 $21,320
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-155
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
25018ET3H447TS-W22 A-40; A-91; A-105 $27,189 30012OT3G447/9T-W40 A-55 $29,853
25018ET3HRB447T-W22 A-40; A-91; A-105 $26,716 30012ST3QIE449T-W22 A-65; A-100 $44,648
25018ET3Q447TSC-W22 A-81 $27,322 30012ST3QIERB449T-W2 A-65; A-100 $44,648
25018ET3X5009-W50MV A-275 $42,249 30012XT3G449T A-118 $52,790
25018OP3GFP445TS-W40 A-226 $13,358 30018ET3G449TC-W22 A-45; A-95 $31,990
25018OP3HFP445TS-W40 A-226 $13,358 30018ET3G449TS-W22 A-40; A-91 $31,384
25018OT3G445TC-W40 A-59 $16,073 30018ET3G449T-W22 A-40; A-91 $31,384
25018OT3G445TS-W40 A-55 $15,513 30018ET3GKD449T-W22 A-106 $31,384
25018OT3G445T-W40 A-55 $15,513 30018ET3GKD580Z-W22 A-106 $39,112
25018OT3GRB445T-W40 A-55 $15,513 30018ET3GRB449T-W22 A-40; A-91 $31,384
25018OT3H445T-W40 A-55 $15,513 30018ET3HKD580Z-W22 A-106 $39,112
25018ST3QIE449T-W22 A-65; A-100 $30,081 30018ET3X5009-W50MV A-275 $47,239
25018ST3QIERB449T-W2 A-65; A-100 $30,081 30018ET3Y355M/L-W22 A-77; A-110; A-240 $60,292
25018XT3G447T A-118 $32,866 30018OP3GFP447/9TSW4 A-226 $19,168
25018XT3H447T A-118 $32,866 30018OT3G447/9TS-W40 A-55 $24,878
25030EP3OFP449TS-W22 A-231 $31,514 30018OT3G447/9T-W40 A-55 $24,878
25036EG3G447TS-W22 A-81 $32,831 30018ST3QIE449T-W22 A-65; A-100 $36,810
25036ET3G447TS-W22 A-40; A-91 $29,846 30018ST3QIERB449T-W2 A-65; A-100 $36,810
25036ET3G449TS-W22 A-40; A-91; A-105 $33,173 30018XT3G449T A-118 $42,566
25036ET3X5009-W50MV A-275 $42,512 30036ET3G449TS-W22 A-40; A-91 $38,269
25036OP3GFP445TS-W40 A-226 $15,654 30036ET3X5009-W50MV A-275 $51,698
25036OP3HFP445TS-W40 A-226 $15,654 30036ET3Y355M/L-W22 A-77; A-110; A-240 $66,321
25036OT3G445TSC-W40 A-59 $19,543 30036OP3GFP445TS-W40 A-226 $19,556
25036OT3G445TS-W40 A-55 $18,983 30036OP3HFP445TS-W40 A-226 $19,556
25036OT3H445TS-W40 A-55 $18,983 30036OT3G445TS-W40 A-55 $22,294
25036ST3QIE449TS-W22 A-65; A-100 $34,663 30036XT3G449TS A-118 $48,747
25036XT3G447TS A-118 $31,124 315LI90AI-0118M A-291 $32,684
250MI60AI-2115M A-290 $11,598 315LI90AI-S A-291 $32,684
250MI60AI-S A-290 $11,598 315MI50AI-018M A-291 $19,586
250MI70AI-S A-291 $13,393 315MI50AI-S A-291 $19,586
250MI80AI-S A-291 $14,250 315MI60AI-018M A-291 $21,964
250SI50AI-2115M A-291 $10,735 315MI60AI-S A-291 $21,964
250SI50AI-3115M A-291 $10,735 315MI70AI-018M A-291 $24,394
250SI50AI-S A-291 $10,735 315MI70AI-S A-291 $24,394
251AIHD-S A-290 $8,393 33018ET3Y355M/L-W22 A-77; A-110; A-240 $64,557
251AIHE-2115M A-290 $9,821 35009ET3G586/7-W22 A-40; A-91; A-106 $64,873
251AIHE-S A-290 $9,821 35009ET3GKD586/7-W22 A-106 $64,873
26012ET3Y355M/L-W22 A-77; A-110; A-240 $53,001 35012ET3G449T-W22 A-40; A-91 $47,633
26018ET3Y355M/L-W22 A-77; A-110; A-240 $43,761 35012ET3GKD580Z-W22 A-106 $50,250
26036ET3Y355M/L-W22 A-77; A-110; A-240 $50,637 35012ET3GKD586/7-W22 A-106 $50,250
280MI50AI-S A-291 $15,520 35012ET3GRB449T-W22 A-41; A-92 $47,633
280MI60AI-S A-291 $17,218 35012ET3X5009-W50MV A-275 $61,532
30009ET3G449T-W22 A-40; A-91 $58,655 35012ST3QIE449T-W22 A-65; A-100 $52,634
30009ET3GKD586/7-W22 A-105 $58,655 35012ST3QIERB449T-W2 A-65; A-100 $52,634
30012ET3G449T-W22 A-40; A-91 $38,437 35012XT3G586/7 A-118 $71,652
30012ET3G586/7-W22 A-40; A-91 $44,301 35018ET3G449TS-W22 A-41; A-92 $36,517
30012ET3GKD449T-W22 A-105 $38,437 35018ET3G449T-W22 A-41; A-92; A-106 $36,517
30012ET3GKD580Z-W22 A-106 $44,301 35018ET3GKD449T-W22 A-106 $36,517
30012ET3GKD586/7-W22 A-106 $44,301 35018ET3GKD580Z-W22 A-106 $41,230
30012ET3HKD580Z-W22 A-106 $44,301 35018ET3GRB449T-W22 A-41; A-92 $36,517
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-157
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
ACBS-11 A-384 $22 CFDB22-1119 A-144; A-337 $481
ACBS-11 MPW100 A-385 $27 CFDB22-373 A-144; A-337 $183
ACBS-11 MPW100 A-385 $27 CFDB27-298 A-144; A-337 $183
ACBS-20 A-385 $22 CFDB33-746 A-426 $319
ACBS-20 MPW100 A-385 $27 CFDB39-224 A-144; A-337 $183
ACBS-20 MPW100 A-385 $27 CFDB47-746 A-144; A-337 $319
AUXTBOXF1W22-D A-412 $270 CFW080017THN4A1Z A-138 $1,259
BC10B-CSW A-369 $5.00 CFW080027TGN4A1Z A-138 $894
BDK-BM140-W22 A-413 $422 CFW080030THN4A1Z A-142; A-335 $1,421
BDK-BM180-W22 A-413 $643 CFW080043TGN4A1Z A-142; A-335 $1,118
BDK-BM210-W22 A-414 $770 CFW080043THN4A1Z A-142; A-335 $1,485
BDK-BM250-W22 A-414 $934 CFW080065TGN4A1Z A-142; A-335 $1,331
BDK-BM280-W22 A-414 $1,610 CFW080070THN4A1Z A-142; A-335 $1,767
BDK-BM320-W22 A-414 $2,814 CFW080073BDN4A1Z A-142; A-335 $929
BLK-E140 A-417 $1,149 CFW080100BDN4A1Z A-142; A-335 $1,039
BLK-E180 A-417 $1,260 CFW080100TGN4A1Z A-142; A-335 $1,516
BLK-E210 A-418 $1,452 CFW080100THN4A1Z A-142; A-335 $2,077
BLK-E250-W22 A-418 $1,573 CFW080120THN4A1Z A-142; A-335 $2,388
BLK-E280 A-418 $1,658 CFW080130TGN4A1Z A-142; A-335 $1,856
BLK-E320 A-418 $1,821 CFW080160TDN4A1Z A-142; A-335 $1,228
BLK-E360-W22 A-418 $2,038 CFW080160TGN4A1Z A-142; A-335 $2,144
BLK-E400-W22 A-418 $2,159 CFW080220TDN4A1Z A-142; A-335 $1,769
BLK-E444/5-W22 A-418 $2,561 CFW080240TGN4A1Z A-142; A-335 $2,876
BLK-E445/7-447/9-W22 A-418 $2,561 CFW080280TDN4A1Z A-142; A-335 $2,266
BLK-E580-W22 A-418 $3,632 CFW080300TGN4A1Z A-142; A-335 $3,474
BLK-EL449/500-W22 A-418 $3,025 CFW300A01P6S1NB20 A-309 $361
BRAKE-E140-W22 A-414 $588 CFW300A01P6S2NB20 A-309 $323
BRAKE-E180-W22 A-414 $972 CFW300A01P6T2NB20 A-316 $343
BRAKE-E210-W22 A-414 $1,410 CFW300A02P6S1NB20 A-316 $394
BRAKE-E250-W22 A-414 $1,985 CFW300A02P6S2NB20 A-316 $348
BRAKE-E280-W22 A-414 $3,454 CFW300A02P6T2NB20 A-316 $376
BRAKE-E320-W22 A-414 $5,453 CFW300A04P2S1NB20 A-316 $420
BRKHDL-BM140-W22 A-414 $78 CFW300A04P2S2NB20 A-316 $371
BRKHDL-BM180-W22 A-414 $127 CFW300A04P2T2NB20 A-316 $399
BRKHDL-BM210-W22 A-415 $179 CFW300A06P0S1NB20 A-316 $507
BRKHDL-BM250-W22 A-415 $236 CFW300A06P0S2NB20 A-316 $461
BRKHDL-BM280-W22 A-415 $453 CFW300A06P0T2NB20 A-316 $484
BRKHDL-BM320-W22 A-415 $602 CFW300A07P3S2NB20 A-316 $543
CAB-RS-1 A-142; A-335 $23 CFW300A07P3T2NB20 A-316 $571
CAB-RS-10 A-142; A-335 $72 CFW300B10P0B2DB20 A-316 $648
CAB-RS-2 A-143; A-336 $31 CFW300B15P2T2DB20 A-316 $792
CAB-RS-3 A-143; A-336 $41 CFW300-CCAN A-316 $100
CAB-RS-5 A-143; A-336 $51 CFW300-CPDP A-316 $294
CAB-RS-7.5 A-143; A-336 $62 CFW300-CRS232 A-316 $82
CAN-01 A-329 $410 CFW300-CRS485 A-316 $82
CCK-01 A-329 $105 CFW300-CUSB A-316 $87
CFDB100-224 A-143; A-336 $183 CFW300-IOADR A-316 $207
CFDB10-746 A-143; A-336 $319 CFW300-IOAENC A-316 $143
CFDB120-298 A-426 $183 CFW300-IOAR A-316 $141
CFDB15-560 A-144; A-337 $319 CFW300-IODR A-316 $108
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-159
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
CFW700C45P0T2DB20 A-327 $2,900 DRCV-E280 A-411 $220
CFW700C45P0T4DB20 A-328 $5,000 DRCV-E280-W22 A-411 $220
CFW700C54P0T2DB20 A-327 $3,700 DRCV-E320 A-411 $344
CFW700C58P5T4DB20 A-328 $5,800 DRCV-E320-W22 A-411 $344
CFW700C70P0T2DB20 A-327 $4,880 DRCV-E360/400 A-411 $393
CFW700D0105T2DBN1 A-327 $8,100 DRCV-E360-W22 A-411 $393
CFW700D22P0T5NBN1 A-329 $3,921 DRCV-E400-W22 A-411 $479
CFW700D27P0T5NBN1 A-329 $4,450 DRCV-E440/500 A-411 $819
CFW700D32P0T5NBN1 A-329 $5,763 DRCV-E440-W22 A-411 $819
CFW700D44P0T5NBN1 A-329 $6,768 DRCV-E48/W56-S A-411 $45
CFW700D70P5T4DBN1 A-328 $6,888 DRCV-E56 A-411 $53
CFW700D86P0T2DBN1 A-327 $6,101 DRCV-E580 A-411 $1,145
CFW700D88P0T4DBN1 A-328 $8,100 DRCV-E580-W22 A-411 $1,145
CFW700E0107T5DB20C3 A-329 $16,240 DRCV-EL440-W22 A-411 $952
CFW700E0107T5NB20C3 A-329 $15,042 DRCV-O140-S A-411 $53
CFW700E0125T5DB20C3 A-329 $16,910 DRCV-O180-S A-411 $128
CFW700E0125T5NB20C3 A-329 $15,662 DRCV-O210-S A-411 $136
CFW700E0150T5DB20C3 A-329 $23,456 DRCV-O250-S A-411 $167
CFW700E0150T5NB20C3 A-329 $21,723 DRCV-O56-S A-411 $45
CFW700E0211T4NB20C3 A-328 $18,787 DRCV-ODP140 A-411 $105
CFW700E105T4DB20C3 A-328 $11,989 DRCV-ODP180 A-411 $120
CFW700E105T4NB20C3 A-328 $9,999 DRCV-ODP210 A-411 $131
CFW700E142T2DB20C3 A-327 $11,500 DRCV-ODP250 A-411 $152
CFW700E142T2NB20C3 A-327 $10,101 DRCV-ODP280 A-411 $220
CFW700E142T4DB20C3 A-328 $14,989 DRCV-ODP320 A-411 $366
CFW700E142T4NB20C3 A-328 $12,000 DRCV-ODP360/400 A-411 $410
CFW700E180T2DB20C3 A-327 $15,500 DRCV-ODP440 A-411 $613
CFW700E180T2NB20C3 A-327 $12,999 DRCV-OS48/56 A-411 $23
CFW700E180T4DB20C3 A-328 $20,989 E0.1812EP3WAX71F3-W2 A-234 $476
CFW700E180T4NB20C3 A-328 $15,400 E0.1818EP3WAX63F3-W2 A-234 $365
CFW700E211T2DB20C3 A-327 $21,222 E0.1836EP3WAX63F3-W2 A-243 $364
CFW700E211T2NB20C3 A-327 $18,555 E0.2512EP3WAX71F3-W2 A-243 $483
CFW700E211T4DB20C3 A-328 $25,989 E0.2518EP3WAX71F3-W2 A-243 $415
CFW700E53P0T5DB20C3 A-329 $9,118 E0.2536EP3WAX63F3-W2 A-243 $373
CFW700E53P0T5NB20C3 A-329 $8,446 E0.3712EP3WAX80F3-W2 A-243 $507
CFW700E63P0T5DB20C3 A-329 $11,580 E0.3718EP3WAX71F3-W2 A-243 $427
CFW700E63P0T5NB20C3 A-329 $10,728 E0.3736EP3WAX71F3-W2 A-243 $408
CFW700E80P0T5DB20C3 A-329 $12,091 E0.5512EP3WAX80F3-W2 A-243 $523
CFW700E80P0T5NB20C3 A-329 $11,200 E0.5518EP3WAX80F3-W2 A-243 $488
CSW30-SP3PBS A-143; A-336 $535 E0.5536EP3WAX71F3-W2 A-243 $415
CSW-SP3PBS A-143; A-336 $460 E0.7512EP3WAX90SF3-W A-243 $660
DEVICENET-05 A-386 $1,100 E0.7512ET3WAXL90SF3W A-243 $872
DRCV-E100 A-410 $89 E0.7512XP3WAX90LF3-W A-120 $1,199
DRCV-E140 A-410 $89 E0.7518EP3WAX80F3-W2 A-243 $507
DRCV-E180 A-411 $128 E0.7518ET3WAX80F3-W2 A-243 $670
DRCV-E180-S A-411 $128 E0.7518XP3WAX90SF3-W A-120 $1,283
DRCV-E210 A-411 $136 E0.7536EP3WAX80F3-W2 A-243 $499
DRCV-E210-S A-411 $136 E0.7536ET3WAX80F3-W2 A-243 $659
DRCV-E250 A-411 $167 E0.7536XP3WAX90SF3-W A-123; A-248 $1,267
DRCV-E250-S A-411 $167 E00112EP3WAX90LF3-W2 A-243 $700
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-161
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
E03018XP3YAX200LF3-W A-124; A-248 $8,717 E11012XP3YAX315SMF3W A-125; A-249 $48,658
E03036EP3YAX200LF3-W A-244 $7,515 E11018EP3YAX315SMF3W A-245 $27,068
E03036ET3YAX200LF3-W A-244 $9,931 E11018ET3YAX315SMF3W A-245 $35,670
E03036XP3YAX200LF3-W A-124; A-248 $8,824 E11018XP3YAX315SMF3W A-125; A-249 $37,846
E03712EP3YAX250SMF3W A-244 $13,422 E11036EP3YAX315SMF3W A-245 $26,144
E03712ET3YAX250SMF3W A-244 $17,736 E11036ET3YAX315SMF3W A-245 $34,547
E03712XP3YAX250SMF3W A-124; A-248 $15,176 E11036XP3YAX315SMF3W A-125; A-249 $42,763
E03718EP3YAX225SMF3W A-244 $10,284 E13212EP3YAX315SMF3W A-245 $52,853
E03718ET3YAX225SMF3W A-244 $13,553 E13212ET3YAX315SMF3W A-245 $76,749
E03718XP3YAX225SMF3W A-124; A-248 $11,099 E13212XP3YAX315SMF3W A-125; A-249 $82,346
E03736EP3YAX200LF3-W A-244 $7,987 E13218EP3YAX315SMF3W A-245 $31,689
E03736ET3YAX200LF3-W A-244 $10,554 E13218ET3YAX315SMF3W A-245 $42,877
E03736XP3YAX200LF3-W A-124; A-248 $10,812 E13218XP3YAX315SMF3W A-125; A-249 $45,939
E04512EP3YAX280SMF3W A-244 $20,481 E13236EP3YAX315SMF3W A-245 $29,862
E04512ET3YAX280SMF3W A-244 $27,064 E13236ET3YAX315SMF3W A-245 $39,500
E04512XP3YAX280SMF3W A-124; A-248 $21,544 E13236XP3YAX315SMF3W A-125; A-249 $54,064
E04518EP3YAX225SMF3W A-245 $11,696 E15012EP3YAX355MLF3W A-245 $62,660
E04518ET3YAX225SMF3W A-245 $15,411 E15012ET3YAX315LF3W2 A-245 $82,712
E04518XP3YAX225SMF3W A-124; A-248 $12,846 E15018EP3YAX315SMF3W A-245 $33,286
E04536EP3YAX225SMF3W A-245 $12,588 E15018ET3YAX315SMF3W A-245 $43,938
E04536ET3YAX225SMF3W A-245 $16,634 E15036EP3YAX315SMF3W A-245 $31,360
E04536XP3YAX225SMF3W A-124; A-248 $17,255 E15036ET3YAX315SMF3W A-245 $41,396
E05512EP3YAX280SMF3W A-245 $20,781 E16012EP3YAX315LF3-W A-245 $60,176
E05512ET3YAX280SMF3W A-245 $27,355 E16012EP3YAX355MLF3W A-245 $65,792
E05512XP3YAX280SMF3W A-124; A-248 $27,320 E16012ET3YAX315LF3-W A-246 $79,990
E05518EP3YAX250SMF3W A-245 $14,354 E16012ET3YAX355MLF3W A-246 $86,940
E05518ET3YAX250SMF3W A-245 $18,916 E16012XP3YAX355MLF3W A-125; A-249 $90,159
E05518XP3YAX250SMF3W A-124; A-248 $19,034 E16018EP3YAX315SMF3W A-246 $36,046
E05536EP3YAX250SMF3W A-245 $14,893 E16018ET3YAX315SMF3W A-246 $47,534
E05536ET3YAX250SMF3W A-245 $19,680 E16018XP3YAX315SMF3W A-125; A-249 $50,129
E05536XP3YAX250SMF3W A-124; A-249 $21,608 E16036EP3YAX315SMF3W A-246 $38,870
E07512EP3YAX315SMF3W A-245 $23,092 E16036ET3YAX315SMF3W A-246 $51,363
E07512ET3YAX315SMF3W A-245 $30,515 E16036XP3YAX315SMF3W A-125; A-249 $67,306
E07512XP3YAX315SMF3W A-124; A-249 $31,133 E20012EP3YAX315LF3-W A-246 $66,948
E07518EP3YAX280SMF3W A-245 $20,544 E20012EP3YAX355MLF3W A-246 $74,007
E07518ET3YAX280SMF3W A-245 $27,072 E20012ET3YAX355MLF3W A-246 $97,795
E07518XP3YAX280SMF3W A-124; A-249 $23,986 E20012XP3YAX355MLF3W A-125; A-249 $110,130
E07536EP3YAX280SMF3W A-245 $20,430 E20018EP3YAX355MLF3W A-246 $64,081
E07536ET3YAX280SMF3W A-245 $26,996 E20018ET3YAX315LF3-W A-246 $70,770
E07536XP3YAX280SMF3W A-125; A-249 $30,248 E20018ET3YAX355MLF3W A-246 $76,925
E09012EP3YAX315SMF3W A-245 $27,076 E20018XP3YAX355MLF3W A-125; A-249 $80,905
E09012ET3YAX315SMF3W A-245 $35,779 E20036EP3YAX355MLF3W A-246 $66,531
E09012XP3YAX315SMF3W A-125; A-249 $40,124 E20036XP3YAX355MLF3W A-125; A-249 $100,962
E09018EP3YAX280SMF3W A-245 $21,307 E25012EP3YAX355MLF3W A-246 $88,256
E09018ET3YAX280SMF3W A-245 $28,077 E25012ET3YAX355MLF3W A-246 $111,338
E09018XP3YAX280SMF3W A-125; A-249 $33,209 E25012XP3YAX355MLF3W A-125; A-249 $133,308
E09036EP3YAX280SMF3W A-245 $21,712 E25018EP3YAX315LF3-W A-246 $62,457
E09036ET3YAX280SMF3W A-245 $28,691 E25018EP3YAX355MLF3W A-246 $67,456
E09036XP3YAX280SMF3W A-125; A-249 $36,063 E25018ET3YAX315LF3-W A-246 $76,550
E11012EP3YAX315SMF3W A-245 $34,367 E25018ET3YAX355MLF3W A-246 $83,195
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-163
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
EDP11S024GN1210000 A-342 $9,613 EDP11S045GN3R01000 A-347 $13,132
EDP11S024GN1211000 A-344 $10,376 EDP11S045GN3R10000 A-346 $14,616
EDP11S024GN3R A-345 $9,652 EDP11S045GN3R11000 A-348 $15,233
EDP11S024GN3R01000 A-347 $10,415 EDP11S054DN12 A-341 $11,491
EDP11S024GN3R10000 A-346 $11,444 EDP11S054DN1201000 A-343 $12,254
EDP11S024GN3R11000 A-348 $12,207 EDP11S054DN1210000 A-342 $13,738
EDP11S028DN12 A-341 $8,408 EDP11S054DN1211000 A-344 $14,501
EDP11S028DN1201000 A-343 $9,171 EDP11S054DN3R A-345 $13,400
EDP11S028DN1210000 A-342 $10,200 EDP11S054DN3R01000 A-347 $14,163
EDP11S028DN1211000 A-344 $10,963 EDP11S054DN3R10000 A-346 $15,647
EDP11S028DN3R A-345 $10,202 EDP11S054DN3R11000 A-348 $16,410
EDP11S028DN3R01000 A-347 $10,965 EDP11S058GN12 A-341 $12,026
EDP11S028DN3R10000 A-346 $11,994 EDP11S058GN1201000 A-343 $12,789
EDP11S028DN3R11000 A-348 $12,757 EDP11S058GN1210000 A-342 $14,721
EDP11S031GN12 A-341 $8,580 EDP11S058GN1211000 A-344 $15,484
EDP11S031GN1201000 A-343 $9,343 EDP11S058GN3R A-345 $13,673
EDP11S031GN1210000 A-342 $10,483 EDP11S058GN3R01000 A-347 $14,436
EDP11S031GN1211000 A-344 $11,246 EDP11S058GN3R10000 A-346 $16,368
EDP11S031GN3R A-345 $10,411 EDP11S058GN3R11000 A-348 $16,683
EDP11S031GN3R01000 A-347 $11,174 EDP11S070DN12 A-341 $12,162
EDP11S031GN3R10000 A-346 $12,314 EDP11S070DN1201000 A-343 $12,925
EDP11S031GN3R11000 A-348 $13,077 EDP11S070DN1210000 A-342 $14,857
EDP11S033DN12 A-341 $9,108 EDP11S070DN1211000 A-344 $15,620
EDP11S033DN1201000 A-343 $9,871 EDP11S070DN3R A-345 $14,162
EDP11S033DN1210000 A-342 $11,011 EDP11S070DN3R01000 A-347 $14,925
EDP11S033DN1211000 A-344 $11,774 EDP11S070DN3R10000 A-346 $16,857
EDP11S033DN3R A-345 $10,902 EDP11S070DN3R11000 A-348 $17,620
EDP11S033DN3R01000 A-347 $11,665 EDP11S070GN12 A-341 $12,729
EDP11S033DN3R10000 A-346 $12,805 EDP11S070GN1201000 A-343 $13,492
EDP11S033DN3R11000 A-348 $13,568 EDP11S070GN1210000 A-342 $15,424
EDP11S038GN12 A-341 $9,293 EDP11S070GN1211000 A-344 $16,187
EDP11S038GN1201000 A-343 $10,056 EDP11S070GN3R A-345 $14,451
EDP11S038GN1210000 A-342 $11,395 EDP11S070GN3R01000 A-347 $15,214
EDP11S038GN1211000 A-344 $12,158 EDP11S070GN3R10000 A-346 $17,146
EDP11S038GN3R A-345 $11,125 EDP11S070GN3R11000 A-348 $17,909
EDP11S038GN3R01000 A-347 $11,888 EDP11S086DN12 A-341 $14,321
EDP11S038GN3R10000 A-346 $13,227 EDP11S086DN1201000 A-343 $15,084
EDP11S038GN3R11000 A-348 $13,873 EDP11S086DN1210000 A-342 $17,016
EDP11S045DN12 A-341 $10,214 EDP11S086DN1211000 A-344 $17,779
EDP11S045DN1201000 A-343 $10,977 EDP11S086DN3R A-345 $16,320
EDP11S045DN1210000 A-342 $12,316 EDP11S086DN3R01000 A-347 $17,083
EDP11S045DN1211000 A-344 $13,079 EDP11S086DN3R10000 A-346 $19,015
EDP11S045DN3R A-345 $12,122 EDP11S086DN3R11000 A-348 $19,778
EDP11S045DN3R01000 A-347 $12,885 EDP11S088GN12 A-341 $14,988
EDP11S045DN3R10000 A-346 $14,224 EDP11S088GN1201000 A-343 $15,751
EDP11S045DN3R11000 A-348 $14,987 EDP11S088GN1210000 A-342 $17,876
EDP11S045GN12 A-341 $10,422 EDP11S088GN1211000 A-344 $18,639
EDP11S045GN1201000 A-343 $11,185 EDP11S088GN3R A-345 $16,653
EDP11S045GN1210000 A-342 $12,669 EDP11S088GN3R01000 A-347 $17,416
EDP11S045GN1211000 A-344 $13,432 EDP11S088GN3R10000 A-346 $19,541
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-165
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
EDP11S515GN3R10000 A-346 $94,009 ESW-65V47E-R39 A-363 $375
EDP11S515GN3R11000 A-348 $94,867 ESW-80V18A-R41 A-363 $474
EDP11S601GN12 A-341 $71,875 ESW-80V18E-R41 A-363 $421
EDP11S601GN1201000 A-343 $72,733 ESW-80V24A-R41 A-363 $474
EDP11S601GN1210000 A-342 $99,447 ESW-80V24E-R41 A-363 $421
EDP11S601GN1211000 A-344 $100,305 ESW-80V47A-R41 A-363 $474
EDP11S601GN3R A-345 $77,828 ESW-80V47E-R41 A-363 $421
EDP11S601GN3R01000 A-347 $78,686 ESW-95V18A-R43 A-363 $929
EDP11S601GN3R10000 A-346 $105,400 ESW-95V18E-R43 A-363 $876
EDP11S601GN3R11000 A-348 $106,258 ESW-95V24A-R43 A-363 $929
EDP11S720GN12 A-341 $88,556 ESW-95V24E-R43 A-363 $876
EDP11S720GN1201000 A-343 $89,414 ESW-95V47A-R43 A-363 $929
EDP11S720GN1210000 A-342 $119,944 ESW-95V47E-R43 A-363 $876
EDP11S720GN1211000 A-344 $120,802 ESW-B12D15A-R30 A-363 $227
EDP11S720GN3R A-345 $94,509 ESW-B12D15E-R30 A-363 $174
EDP11S720GN3R01000 A-347 $95,367 ESW-B12D39A-R30 A-363 $227
EDP11S720GN3R10000 A-346 $125,897 ESW-B12D39E-R30 A-363 $174
EDP11S720GN3R11000 A-348 $126,755 ESW-B12V24A-R30 A-363 $227
ENCCBLMS-10 A-416 $232 ESW-B12V24E-R30 A-363 $174
ENCCBLMS-20 A-416 $413 ESW-B18D15A-R32 A-363 $241
ENCCBLMS-30 A-417 $454 ESW-B18D15E-R32 A-363 $188
ENCCBLMS-50 A-417 $672 ESW-B18D39A-R32 A-363 $241
ESW-105V18A-R44 A-356 $1,028 ESW-B18D39E-R32 A-363 $188
ESW-105V18A-R45 A-356 $1,028 ESW-B18V24A-R32 A-363 $241
ESW-105V18E-R44 A-363 $975 ESW-B18V24E-R32 A-363 $188
ESW-105V18E-R45 A-363 $975 ESW-B25D15A-R33 A-363 $276
ESW-105V24A-R44 A-363 $1,028 ESW-B25D15E-R33 A-363 $223
ESW-105V24A-R45 A-363 $1,028 ESW-B25D39A-R33 A-363 $276
ESW-105V24E-R44 A-363 $975 ESW-B25D39E-R33 A-363 $223
ESW-105V24E-R45 A-363 $975 ESW-B25V24A-R33 A-363 $276
ESW-105V47A-R44 A-363 $1,028 ESW-B25V24E-R33 A-363 $223
ESW-105V47A-R45 A-363 $1,028 ESW-B32D15A-R34 A-363 $298
ESW-105V47E-R44 A-363 $975 ESW-B32D15E-R34 A-363 $245
ESW-105V47E-R45 A-363 $975 ESW-B32D39A-R34 A-363 $298
ESW-40V18A-R35 A-363 $345 ESW-B32D39E-R34 A-363 $245
ESW-40V18E-R35 A-363 $292 ESW-B32V24A-R34 A-363 $298
ESW-40V24A-R35 A-363 $345 ESW-B32V24E-R34 A-363 $245
ESW-40V24E-R35 A-363 $292 ESW-B38D15A-R35 A-363 $345
ESW-40V47A-R35 A-363 $345 ESW-B38D15E-R35 A-363 $292
ESW-40V47E-R35 A-363 $292 ESW-B38D39A-R35 A-363 $345
ESW-50V18A-R38 A-363 $403 ESW-B38D39E-R35 A-363 $292
ESW-50V18E-R38 A-363 $350 ESW-B38V24A-R35 A-363 $345
ESW-50V24A-R38 A-363 $403 ESW-B38V24E-R35 A-363 $292
ESW-50V24E-R38 A-363 $350 ESW-B9D15A-R23 A-363 $210
ESW-50V47A-R38 A-363 $403 ESW-B9D15A-R24 A-363 $210
ESW-50V47E-R38 A-363 $350 ESW-B9D15A-R25 A-363 $210
ESW-65V18A-R39 A-363 $428 ESW-B9D15A-R26 A-363 $210
ESW-65V18E-R39 A-363 $375 ESW-B9D15A-R27 A-363 $210
ESW-65V24A-R39 A-363 $428 ESW-B9D15A-R28 A-363 $210
ESW-65V24E-R39 A-363 $375 ESW-B9D15A-R29 A-363 $210
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-167
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
ESWC-300V24N4-R50 A-373 $8,670 ESWE-9T02KX-D06 A-376 $1,140
ESWC-300V24N4-R51 A-373 $9,250 ESWE-9T02KX-D07 A-376 $1,140
ESWC-300V47N4-R50 A-373 $8,670 ESWE-9T02KX-D08 A-376 $1,140
ESWC-40T02N4-R34 A-374 $1,965 ESWE-9T02KX-D09 A-376 $1,140
ESWC-40T02N4-R35 A-374 $2,050 ESWE-9T02KX-D10 A-376 $1,140
ESWC-40T02N4-R37 A-374 $2,180 ESWE-9T04KX-D05 A-376 $1,140
ESWC-40T04N4-R34 A-374 $1,965 ESWE-9T04KX-D06 A-376 $1,140
ESWC-40T04N4-R35 A-374 $2,050 ESWE-9T04KX-D07 A-376 $1,140
ESWC-40T04N4-R37 A-374 $2,180 ESWE-9T04KX-D08 A-376 $1,140
ESWC-40T05N4-R34 A-374 $1,965 ESWE-9T04KX-D09 A-376 $1,140
ESWC-40T05N4-R35 A-374 $2,050 ESWE-9T04KX-D10 A-376 $1,140
ESWC-40T05N4-R37 A-374 $2,180 ESWE-9T05KX-D05 A-376 $1,140
ESWC-40V18N4-R34 A-373 $1,765 ESWE-9T05KX-D06 A-376 $1,140
ESWC-40V18N4-R35 A-373 $1,850 ESWE-9T05KX-D07 A-376 $1,140
ESWC-40V18N4-R37 A-373 $1,980 ESWE-9T05KX-D08 A-376 $1,140
ESWC-40V24N4-R34 A-373 $1,765 ESWE-9T05KX-D09 A-376 $1,140
ESWC-40V24N4-R35 A-373 $1,850 ESWE-9T05KX-D10 A-376 $1,140
ESWC-40V24N4-R37 A-373 $1,980 ESWE-9V18KX-D05 A-376 $855
ESWC-40V47N4-R34 A-373 $1,765 ESWE-9V18KX-D06 A-376 $855
ESWC-40V47N4-R35 A-373 $1,850 ESWE-9V18KX-D07 A-376 $855
ESWC-40V47N4-R37 A-373 $1,980 ESWE-9V18KX-D08 A-376 $855
ESWC-65T02N4-R39 A-374 $2,320 ESWE-9V18KX-D09 A-376 $855
ESWC-65T02N4-R41 A-374 $2,410 ESWE-9V18KX-D10 A-376 $865
ESWC-65T04N4-R39 A-374 $2,320 ESWE-9V24KX-D06 A-376 $855
ESWC-65T04N4-R41 A-374 $2,410 ESWE-9V24KX-D07 A-376 $855
ESWC-65T05N4-R39 A-374 $2,320 ESWE-9V24KX-D08 A-376 $855
ESWC-65T05N4-R41 A-374 $2,410 ESWE-9V24KX-D09 A-376 $855
ESWC-65V18N4-R39 A-373 $2,070 ESWE-9V24KX-D10 A-376 $865
ESWC-65V18N4-R41 A-373 $2,160 ESWE-9V47KX-D05 A-376 $855
ESWC-65V24N4-R39 A-373 $2,070 ESWE-9V47KX-D06 A-376 $855
ESWC-65V24N4-R41 A-373 $2,160 ESWE-9V47KX-D07 A-376 $855
ESWC-65V47N4-R39 A-373 $2,070 ESWE-9V47KX-D08 A-376 $855
ESWC-65V47N4-R41 A-373 $2,160 ESWE-9V47KX-D09 A-376 $855
ESWE-18T02KX-D11 A-374 $1,155 ESWE-9V47KX-D10 A-376 $865
ESWE-18T04KX-D11 A-374 $1,155 ESWF-105T02N4-D24 A-377 $2,635
ESWE-18T05KX-D11 A-376 $1,155 ESWF-105T04N4-D24 A-377 $2,635
ESWE-18V18KX-D11 A-376 $875 ESWF-105T05N4-D24 A-378 $2,635
ESWE-18V24KX-D11 A-376 $875 ESWF-105V18N4-D24 A-376 $2,435
ESWE-18V47KX-D11 A-376 $875 ESWF-105V24N4-D24 A-376 $2,435
ESWE-25T02KX-D12 A-376 $1,175 ESWF-105V47N4-D24 A-377 $2,435
ESWE-25T04KX-D12 A-376 $1,175 ESWF-18T02N4-D11 A-378 $1,400
ESWE-25T05KX-D12 A-376 $1,175 ESWF-18T04N4-D11 A-378 $1,400
ESWE-25V18KX-D12 A-376 $900 ESWF-18T05N4-D11 A-378 $1,400
ESWE-25V24KX-D12 A-376 $900 ESWF-18V18N4-D11 A-377 $1,300
ESWE-25V47KX-D12 A-376 $900 ESWF-18V24N4-D11 A-377 $1,300
ESWE-40T02KX-D14 A-376 $1,260 ESWF-18V47N4-D11 A-377 $1,300
ESWE-40T04KX-D14 A-376 $1,260 ESWF-25T02N4-D12 A-378 $1,490
ESWE-40T05KX-D14 A-376 $1,260 ESWF-25T04N4-D12 A-378 $1,490
ESWE-40V18KX-D14 A-376 $990 ESWF-25T05N4-D12 A-378 $1,490
ESWE-40V24KX-D14 A-376 $990 ESWF-25V18N4-D12 A-377 $1,390
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-169
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
ESWS-B38V24E-RM35 A-364 $274 ESWX-25V18A79-R32 A-386 $3,850
ESWS-B9D15A-RM23 A-364 $188 ESWX-25V18A79-R33 A-386 $3,850
ESWS-B9D15A-RM24 A-364 $188 ESWX-25V18E79-R23 A-386 $3,250
ESWS-B9D15A-RM25 A-364 $188 ESWX-25V18E79-R24 A-386 $3,250
ESWS-B9D15A-RM26 A-364 $188 ESWX-25V18E79-R25 A-386 $3,250
ESWS-B9D15A-RM27 A-364 $188 ESWX-25V18E79-R26 A-386 $3,250
ESWS-B9D15A-RM28 A-364 $188 ESWX-25V18E79-R27 A-386 $3,250
ESWS-B9D15A-RM29 A-364 $188 ESWX-25V18E79-R28 A-386 $3,250
ESWS-B9D15E-RM23 A-364 $135 ESWX-25V18E79-R29 A-386 $3,250
ESWS-B9D15E-RM24 A-364 $135 ESWX-25V18E79-R30 A-386 $3,250
ESWS-B9D15E-RM25 A-364 $135 ESWX-25V18E79-R32 A-386 $3,250
ESWS-B9D15E-RM26 A-364 $135 ESWX-25V18E79-R33 A-386 $3,250
ESWS-B9D15E-RM27 A-364 $135 ESWX-25V24A79-R23 A-386 $3,850
ESWS-B9D15E-RM28 A-364 $135 ESWX-25V24A79-R25 A-386 $3,850
ESWS-B9D15E-RM29 A-364 $135 ESWX-25V24A79-R26 A-386 $3,850
ESWS-B9V24A-RM23 A-364 $188 ESWX-25V24A79-R27 A-386 $3,850
ESWS-B9V24A-RM24 A-364 $188 ESWX-25V24A79-R28 A-386 $3,850
ESWS-B9V24A-RM25 A-364 $188 ESWX-25V24A79-R29 A-386 $3,850
ESWS-B9V24A-RM26 A-364 $188 ESWX-25V24A79-R32 A-386 $3,850
ESWS-B9V24A-RM27 A-364 $188 ESWX-25V24A79-R33 A-386 $3,850
ESWS-B9V24A-RM28 A-364 $188 ESWX-25V24E79-R23 A-386 $3,250
ESWS-B9V24A-RM29 A-364 $188 ESWX-25V24E79-R25 A-386 $3,250
ESWS-B9V24E-RM23 A-364 $135 ESWX-25V24E79-R26 A-386 $3,250
ESWS-B9V24E-RM24 A-364 $135 ESWX-25V24E79-R27 A-386 $3,250
ESWS-B9V24E-RM25 A-364 $135 ESWX-25V24E79-R28 A-386 $3,250
ESWS-B9V24E-RM26 A-364 $135 ESWX-25V24E79-R29 A-386 $3,250
ESWS-B9V24E-RM27 A-364 $135 ESWX-25V24E79-R32 A-386 $3,250
ESWS-B9V24E-RM28 A-364 $135 ESWX-25V24E79-R33 A-386 $3,250
ESWS-B9V24E-RM29 A-364 $135 ESWX-25V47A79-R23 A-386 $3,850
ESWX-105V18A79-R43 A-385 $4,600 ESWX-25V47A79-R24 A-386 $3,850
ESWX-105V18A79-R44 A-385 $4,600 ESWX-25V47A79-R25 A-386 $3,850
ESWX-105V18A79-R45 A-386 $4,600 ESWX-25V47A79-R26 A-386 $3,850
ESWX-105V18E79-R43 A-386 $3,870 ESWX-25V47A79-R27 A-386 $3,850
ESWX-105V18E79-R44 A-386 $3,870 ESWX-25V47A79-R28 A-386 $3,850
ESWX-105V18E79-R45 A-386 $3,870 ESWX-25V47A79-R30 A-386 $3,850
ESWX-105V24A79-R43 A-386 $4,600 ESWX-25V47A79-R32 A-386 $3,850
ESWX-105V24A79-R45 A-386 $4,600 ESWX-25V47A79-R33 A-386 $3,850
ESWX-105V24E79-R43 A-386 $3,870 ESWX-25V47E79-R23 A-386 $3,250
ESWX-105V24E79-R45 A-386 $3,870 ESWX-25V47E79-R24 A-386 $3,250
ESWX-105V47A79-R43 A-386 $4,600 ESWX-25V47E79-R25 A-386 $3,250
ESWX-105V47A79-R44 A-386 $4,600 ESWX-25V47E79-R26 A-386 $3,250
ESWX-105V47E79-R43 A-386 $3,870 ESWX-25V47E79-R27 A-386 $3,250
ESWX-105V47E79-R44 A-386 $3,870 ESWX-25V47E79-R28 A-386 $3,250
ESWX-25V18A79-R23 A-386 $3,850 ESWX-25V47E79-R30 A-386 $3,250
ESWX-25V18A79-R24 A-386 $3,850 ESWX-25V47E79-R32 A-386 $3,250
ESWX-25V18A79-R25 A-386 $3,850 ESWX-25V47E79-R33 A-386 $3,250
ESWX-25V18A79-R26 A-386 $3,850 ESWX-40V18A79-R34 A-386 $3,950
ESWX-25V18A79-R27 A-386 $3,850 ESWX-40V18A79-R35 A-386 $3,950
ESWX-25V18A79-R28 A-386 $3,850 ESWX-40V18E79-R34 A-386 $3,300
ESWX-25V18A79-R29 A-386 $3,850 ESWX-40V18E79-R35 A-386 $3,300
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-171
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
FCO-E180-S A-425 $46 FLC-EL440-322-W22 A-406 $1,200
FCO-E180-W22 A-425 $38 FLC-ERS140-UBC A-406 $85
FCO-E210-S A-426 $49 FLC-ERS180-UBC A-406 $145
FCO-E210-W22 A-425 $53 FLC-ERS210-UBC A-406; A-407 $150
FCO-E250-S A-426 $89 FLC-ERSW180-UBC A-406 $145
FCO-E250-W22 A-425 $121 FLC-IE140 A-406 $250
FCO-E280-W22 A-425 $149 FLC-IE180-W22 A-406 $285
FCO-E320-W22 A-425 $256 FLC-IE210 A-406 $300
FCO-E360-W22 A-425 $672 FLC-IE250-W22 A-406 $325
FCO-E400-W22 A-425 $672 FLC-IE280 A-406 $365
FCO-E440-W22 A-425 $1,032 FLC-IE320 A-406 $550
FCO-E48/W56-S A-426 $20 FLC-IM100DIN-AL-UBC A-407 $128
FCO-E500-W22 A-425 $1,032 FLC-IM112DIN-AL-UBC A-407 $145
FCO-E56/140-S A-426 $19 FLC-IM112DIN-UBC-W22 A-407 $145
FCO-E580-W22 A-425 $1,605 FLC-IM132DIN-AL-UBC A-407 $150
FCO-E63 A-425 $23 FLC-IM160DIN-W22 A-407 $195
FCO-E71 A-425 $23 FLC-IM160-W22 A-407 $195
FCO-E80 A-425 $23 FLC-IM180 A-407 $290
FCO-EL440-W22 A-425 $1,032 FLC-IM200 A-407 $440
FLC-0440-314-W40 A-407 $2,457 FLC-IM280-316 A-407 $830
FLC-0440-319-W40 A-407 $2,457 FLC-IM63DIN-AL A-407 $39
FLC-048/W56-S A-408 $67 FLC-IM71DIN-AL-BC A-407 $43
FLC-E140-S A-394 $85 FLC-IM71DIN-BC-W22 A-407 $43
FLC-E140-UBC A-394 $85 FLC-IM80DIN-AL-BC A-407 $45
FLC-E180-S A-406; A-407 $145 FLC-IM90DIN-AL-UBC A-407 $85
FLC-E180-UBC-W22 A-406 $145 FLC-O140-S A-408 $85
FLC-E210-S A-406 $150 FLC-O140-UBC A-408 $85
FLC-E210-UBC A-406 $150 FLC-O180-S A-408 $145
FLC-E250-S A-406 $195 FLC-O180-UBC A-408 $145
FLC-E250-W22 A-406 $195 FLC-O210-S A-408 $150
FLC-E280 A-406 $290 FLC-O210-UBC A-408 $150
FLC-E320 A-406 $440 FLC-O250 A-408 $195
FLC-E360-314-W22 A-292 $575 FLC-O250-S A-408 $195
FLC-E400-314 A-292 $620 FLC-O280 A-408 $290
FLC-E400-316 A-406 $620 FLC-O320 A-408 $440
FLC-E440-314 A-406; A-407 $830 FLC-O360-314 A-408 $575
FLC-E440-319 A-406 $830 FLC-O400-316 A-408 $620
FLC-E440-322 A-406 $830 FLC-O440-314 A-408 $830
FLC-E48/W56-S A-406 $80 FLC-O440-319 A-408 $830
FLC-E500-314-W22 A-406 $1,200 FLC-O48-203-FC149 A-408 $85
FLC-E500-319-W22 A-406 $1,200 FLC-O48-203-FC95 A-408 $85
FLC-E500-322-W22 A-406 $1,200 FLC-O56-203-FC149-S A-408 $85
FLC-E56-203-FC149 A-406 $85 FLC-O56-204-FC149 A-408 $85
FLC-E56-203-FC149-S A-407 $85 FLC-O56-204-S A-408 $85
FLC-E56-204-FC149 A-407 $85 FLC-RS250 A-406 $195
FLC-E56-204-S A-407 $85 FLC-RSW250 A-406 $195
FLC-E580-314 A-406 $1,465 FLC-X140 A-407 $120
FLC-E580-316 A-407 $1,650 FLC-X180 A-407 $201
FLC-E580-322 A-406 $1,650 FLC-X210 A-407 $214
FLC-E580-324 A-406 $1,650 FLC-X250 A-407 $291
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-173
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
GPH2015PC4001 A-356 $4,527 GPH2125PC4000 A-355 $9,013
GPH2015QC2000 A-353 $4,300 GPH2125PC4001 A-356 $9,508
GPH2015QC2001 A-354 $4,795 GPH2125QC2000 A-353 $11,880
GPH2015QC4000 A-353 $3,750 GPH2125QC2001 A-354 $12,375
GPH2015QC4001 A-354 $4,245 GPH2125QC4000 A-353 $7,500
GPH2020PC4000 A-355 $4,243 GPH2125QC4001 A-354 $7,995
GPH2020PC4001 A-356 $4,738 GPH2150PC2000 A-355 $15,706
GPH2020QC4000 A-353 $3,900 GPH2150PC2001 A-356 $16,201
GPH2020QC4001 A-354 $4,395 GPH2150PC4000 A-355 $10,350
GPH2025PC2000 A-355 $5,412 GPH2150PC4001 A-356 $10,845
GPH2025PC2001 A-356 $5,907 GPH2150QC2000 A-353 $12,700
GPH2025QC2000 A-353 $4,800 GPH2150QC2001 A-354 $13,195
GPH2025QC2001 A-354 $5,295 GPH2150QC4000 A-353 $8,450
GPH2030PC2000 A-355 $6,585 GPH2150QC4001 A-354 $8,945
GPH2030PC2001 A-356 $7,080 GPH2175PC2000 A-355 $21,075
GPH2030PC4000 A-355 $4,865 GPH2175PC2001 A-356 $21,570
GPH2030PC4001 A-356 $5,360 GPH2175QC2000 A-353 $14,500
GPH2030QC2000 A-353 $5,800 GPH2175QC2001 A-354 $14,995
GPH2030QC2001 A-354 $6,295 GPH2200PC4000 A-355 $12,965
GPH2030QC4000 A-353 $4,300 GPH2200PC4001 A-356 $13,460
GPH2030QC4001 A-354 $4,795 GPH2200QC4000 A-353 $10,700
GPH2050PC2000 A-355 $8,260 GPH2200QC4001 A-354 $11,195
GPH2050PC2001 A-356 $8,755 GPH2250PC4000 A-355 $14,847
GPH2050PC4000 A-355 $5,412 GPH2250PC4001 A-356 $15,342
GPH2050PC4001 A-356 $5,907 GPH2250QC4000 A-353 $11,880
GPH2050QC2000 A-353 $6,990 GPH2250QC4001 A-354 $12,375
GPH2050QC2001 A-354 $7,485 GPH2300PC4000 A-355 $15,706
GPH2050QC4000 A-353 $4,800 GPH2300PC4001 A-356 $16,201
GPH2050QC4001 A-354 $5,295 GPH2300QC4000 A-353 $12,700
GPH2060PC2000 A-355 $9,013 GPH2300QC4001 A-354 $13,195
GPH2060PC2001 A-356 $9,508 GPH2350PC4000 A-355 $21,075
GPH2060QC2000 A-353 $7,500 GPH2350PC4001 A-356 $21,570
GPH2060QC2001 A-354 $7,995 GPH2350QC4000 A-353 $14,500
GPH2075PC2000 A-355 $10,350 GPH2350QC4001 A-354 $14,995
GPH2075PC2001 A-356 $10,845 H311007110 A-129; A-131 $4,953
GPH2075PC4000 A-355 $6,585 H311007111 A-129; A-131 $4,210
GPH2075PC4001 A-356 $7,080 H311007112 A-130; A-132 $4,924
GPH2075QC2000 A-353 $8,450 H311007113 A-130; A-132 $4,155
GPH2075QC2001 A-354 $8,945 HMI-01 A-394 $320
GPH2075QC4000 A-353 $5,800 HMI-02 A-330 $320
GPH2075QC4001 A-354 $6,295 HMI-03 A-330 $320
GPH2100PC2000 A-355 $12,965 HMI-CFW08-RS A-143; A-322; A-330; A-336 $135
GPH2100PC2001 A-356 $13,460 HMID-01 A-330 $54
GPH2100PC4000 A-355 $8,260 IHM-CAB-RS-10M A-330 $102
GPH2100PC4001 A-356 $8,755 IHM-CAB-RS-1M A-330 $54
GPH2100QC2000 A-353 $10,700 IHM-CAB-RS-2M A-330 $60
GPH2100QC2001 A-354 $11,195 IHM-CAB-RS-3M A-330 $66
GPH2100QC4000 A-353 $6,990 IHM-CAB-RS-5M A-330 $75
GPH2100QC4001 A-354 $7,485 IHM-CAB-RS-7.5M A-330 $90
GPH2125PC2000 A-355 $14,847 IOE-04 A-394 $2,795
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-175
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
PCQ115H A-197 $411 PESW-B32D39EX-R68 A-368 $262
PCQ120 A-198 $411 PESW-B32V24AX-R68 A-368 $298
PCQ120H A-197 $500 PESW-B32V24EX-R68 A-368 $262
PCQ125 A-198 $500 PESW-B38D15AX-R69 A-368 $345
PCSA-01 A-330 $48 PESW-B38D15EX-R69 A-368 $321
PCSB-01 A-330 $51 PESW-B38D39AX-R69 A-368 $345
PCSC-01 A-330 $54 PESW-B38D39EXR69 A-368 $321
PCSD-01 A-330 $56 PESW-B38V24AX-R69 A-368 $345
PCSE-01 A-330 $76 PESW-B38V24EX-R69 A-368 $321
PESW-105V18EX-R44 A-368 $1,184 PESW-B9D15AX-R57 A-368 $210
PESW-105V18EX-R45 A-368 $1,184 PESW-B9D15AX-R58 A-368 $210
PESW-105V24EX-R44 A-369 $1,184 PESW-B9D15AX-R59 A-368 $210
PESW-105V24EX-R45 A-369 $1,184 PESW-B9D15AX-R60 A-368 $210
PESW-105V47EX-R44 A-369 $1,184 PESW-B9D15AX-R61 A-368 $210
PESW-105V47EX-R45 A-369 $1,184 PESW-B9D15AX-R62 A-368 $210
PESW-40V18EX-R35 A-369 $321 PESW-B9D15AX-R63 A-368 $210
PESW-40V24EX-R35 A-369 $321 PESW-B9D15EX-R57 A-368 $157
PESW-40V47EX-R35 A-369 $321 PESW-B9D15EX-R58 A-368 $157
PESW-50V18EX-R38 A-369 $564 PESW-B9D15EX-R59 A-368 $157
PESW-50V24EX-R38 A-369 $564 PESW-B9D15EX-R60 A-368 $157
PESW-50V47EX-R38 A-369 $564 PESW-B9D15EX-R61 A-368 $157
PESW-65V18EX-R39 A-369 $589 PESW-B9D15EX-R62 A-368 $157
PESW-65V24EX-R39 A-369 $589 PESW-B9D15EX-R63 A-368 $157
PESW-65V47EX-R39 A-369 $589 PESW-B9D39AX-R57 A-368 $210
PESW-80V18EX-R41 A-369 $635 PESW-B9D39AX-R58 A-368 $210
PESW-80V24EX-R41 A-369 $635 PESW-B9D39AX-R59 A-368 $210
PESW-80V47EX-R41 A-369 $635 PESW-B9D39AX-R60 A-368 $210
PESW-95V18EX-R43 A-369 $1,085 PESW-B9D39AX-R61 A-368 $210
PESW-95V24EX-R43 A-369 $1,085 PESW-B9D39AX-R62 A-368 $210
PESW-95V47EX-R43 A-369 $1,085 PESW-B9D39AX-R63 A-368 $210
PESW-B12D15AX-R64 A-365 $227 PESW-B9D39EX-R57 A-368 $157
PESW-B12D15EX-R64 A-365 $174 PESW-B9D39EX-R58 A-368 $157
PESW-B12D39AX-R64 A-368 $227 PESW-B9D39EX-R59 A-368 $157
PESW-B12D39EX-R64 A-368 $174 PESW-B9D39EX-R60 A-368 $157
PESW-B12V24AX-R64 A-368 $227 PESW-B9D39EX-R61 A-368 $157
PESW-B12V24EX-R64 A-368 $174 PESW-B9D39EX-R62 A-368 $157
PESW-B18D15AX-R66 A-368 $241 PESW-B9D39EX-R63 A-368 $157
PESW-B18D15EX-R66 A-368 $188 PESW-B9V24AX-R57 A-368 $210
PESW-B18D39AX-R66 A-368 $241 PESW-B9V24AX-R58 A-368 $210
PESW-B18D39EX-R66 A-368 $188 PESW-B9V24AX-R59 A-368 $210
PESW-B18V24AX-R66 A-368 $241 PESW-B9V24AX-R60 A-368 $210
PESW-B18V24EX-R66 A-368 $188 PESW-B9V24AX-R61 A-368 $210
PESW-B25D15AX-R67 A-368 $276 PESW-B9V24AX-R62 A-368 $210
PESW-B25D15EX-R67 A-368 $223 PESW-B9V24AX-R63 A-368 $210
PESW-B25D39AX-R67 A-368 $276 PESW-B9V24EX-R57 A-368 $157
PESW-B25D39EX-R67 A-368 $223 PESW-B9V24EX-R58 A-368 $157
PESW-B25V24AX-R67 A-368 $276 PESW-B9V24EX-R59 A-368 $157
PESW-B25V24EX-R67 A-368 $223 PESW-B9V24EX-R60 A-368 $157
PESW-B32D15AX-R68 A-368 $298 PESW-B9V24EX-R61 A-368 $157
PESW-B32D15EX-R68 A-368 $262 PESW-B9V24EX-R62 A-368 $157
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-177
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
SSW7000C240T411N2 A-286; A-393 $73,235 TQ1320D56SP A-303 $515
SSW7000C300T211N2 A-286; A-393 $69,396 TQ1320H56SP A-303 $538
SSW7000C300T411N2 A-286; A-393 $80,861 TQ1320L56SP A-303 $509
SSW7000C370T211N2 A-286; A-393 $70,960 TQ1320R56SP A-303 $509
SSW7000C370T411N2 A-286; A-393 $82,080 TQ1330D56SP A-303 $515
SSW7000C430T211N2 A-286; A-393 $73,789 TQ1330H56SP A-303 $538
SSW7000C430T411N2 A-286; A-393 $86,656 TQ1330L56SP A-304 $509
STUBSHAFT-A-TEFC A-417 $220 TQ1330R56SP A-304 $509
STUBSHAFT-B-TEFC A-417 $240 TQ1340D56SP A-304 $515
STUBSHAFT-C-TEFC A-417 $240 TQ1340H56SP A-304 $538
STUBSHAFT-D-TEFC A-417 $270 TQ1340L56SP A-304 $509
TBX-ADPT-360/400- W22 A-412 $660 TQ1340R56SP A-304 $509
TBX-ADPT-444/500- W22 A-413 $921 TQ1350D56SP A-304 $515
TBX-ADPT-444/5-W22 A-413 $777 TQ1350H56SP A-304 $538
TBX-ADPT-580-W22 A-413 $1,273 TQ1350L56SP A-305 $509
TBX-ADPT-L440-W22 A-413 $1,080 TQ1350R56SP A-305 $509
TBX-BM140-W22 A-415 $135 TQ135D56SP A-302 $515
TBX-BM180/210-W22 A-415 $177 TQ135H56SP A-302 $538
TBX-BM250/280-W22 A-415 $191 TQ135L56SP A-302 $509
TBX-BM320-W22 A-415 $238 TQ135R56SP A-302 $509
TBX-E140-S A-413 $62 TQ1360D56SP A-305 $470
TBX-E140-W22 A-411 $71 TQ1360H56SP A-305 $507
TBX-E180/210-W22 A-411 $99 TQ1360L56SP A-305 $457
TBX-E180-S A-413 $73 TQ1360R56SP A-305 $457
TBX-E210-S A-413 $108 TQ1510D140SP A-302 $569
TBX-E250/280-W22 A-412 $144 TQ1510H140SP A-302 $593
TBX-E250-S A-413 $154 TQ1510L140SP A-302 $558
TBX-E320-W22 A-412 $214 TQ1510R140SP A-302 $558
TBX-E360/400-3-W22 A-412 $324 TQ1515D56SP A-303 $569
TBX-E440-3-W22 A-412 $497 TQ1515H56SP A-303 $593
TBX-E447/505-3-W22 A-412 $768 TQ1515L56SP A-303 $558
TBX-E48/W56 A-413 $40 TQ1515R56SP A-303 $558
TBX-E56-S A-413 $40 TQ1520D56SP A-303 $569
TBX-EL447/9-586/7-W2 A-412 $1,686 TQ1520H56SP A-303 $593
TCL-CFW08 A-143; A-336 $13 TQ1520L56SP A-303 $558
TERMBLCK-W22-112/132 A-419 $52 TQ1520R56SP A-303 $558
TERMBLCK-W22-160/180 A-419 $86 TQ1530D56SP A-304 $569
TERMBLCK-W22-200 A-419 $151 TQ1530H56SP A-304 $593
TERMBLCK-W22-225/250 A-419 $280 TQ1530L56SP A-304 $558
TERMBLCK-W22-280 A-419 $533 TQ1530R56SP A-304 $558
TERMBLCK-W22-315S/M A-419 $533 TQ1540D56SP A-304 $569
TERMBLCK-W22-355M/L A-419 $1,032 TQ1540H56SP A-304 $593
TERMBLCK-W22-63-100 A-419 $35 TQ1540L56SP A-304 $558
TQ1310D56SP A-299 $515 TQ1540R56SP A-304 $558
TQ1310H56SP A-299 $538 TQ1550D56SP A-305 $569
TQ1310L56SP A-302 $509 TQ1550H56SP A-305 $593
TQ1310R56SP A-302 $509 TQ1550L56SP A-305 $558
TQ1315D56SP A-302 $515 TQ1550R56SP A-305 $558
TQ1315H56SP A-302 $538 TQ155D140SP A-302 $569
TQ1315L56SP A-303 $509 TQ155H140SP A-302 $593
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-179
Catalog Index
Part Number Page(s) Price Part Number Page(s) Price
TQ2610H140SP A-302 $990 TS1350DSP A-308 $470
TQ2610L140SP A-302 $876 TS1350HSP A-308 $507
TQ2610R140SP A-302 $876 TS1350LSP A-309 $457
TQ2615D56SP A-303 $904 TS1350RSP A-309 $457
TQ2615H56SP A-303 $990 TS135DSP A-306 $470
TQ2615L56SP A-303 $876 TS135HSP A-306 $507
TQ2615R56SP A-303 $876 TS135LSP A-306 $457
TQ2620D56SP A-303 $904 TS135RSP A-306 $457
TQ2620H56SP A-303 $990 TS1360DSP A-309 $470
TQ2620L56SP A-303 $876 TS1360HSP A-309 $507
TQ2620R56SP A-303 $876 TS1360LSP A-309 $457
TQ2630D56SP A-304 $904 TS1360RSP A-309 $457
TQ2630H56SP A-304 $990 TS1510DSP A-306 $559
TQ2630L56SP A-304 $876 TS1510HSP A-306 $573
TQ2630R56SP A-304 $876 TS1510LSP A-306 $533
TQ2640D56SP A-304 $904 TS1510RSP A-306 $533
TQ2640H56SP A-304 $990 TS1515DSP A-307 $559
TQ2640L56SP A-304 $876 TS1515HSP A-307 $573
TQ2640R56SP A-304 $876 TS1515LSP A-307 $533
TQ2650D56SP A-305 $904 TS1515RSP A-307 $533
TQ2650H56SP A-305 $990 TS1520DSP A-307 $559
TQ2650L56SP A-305 $876 TS1520HSP A-307 $573
TQ2650R56SP A-305 $876 TS1520LSP A-307 $533
TQ265D140SP A-302 $904 TS1520RSP A-307 $533
TQ265H140SP A-302 $990 TS1530DSP A-308 $559
TQ265L140SP A-302 $876 TS1530HSP A-308 $573
TQ265R140SP A-302 $876 TS1530LSP A-308 $533
TQ2660D56SP A-305 $918 TS1530RSP A-308 $533
TQ2660H56SP A-305 $983 TS1540DSP A-308 $559
TQ2660L56SP A-305 $868 TS1540HSP A-308 $573
TQ2660R56SP A-305 $868 TS1540LSP A-308 $533
TS1310DSP A-305 $470 TS1540RSP A-308 $533
TS1310HSP A-305 $507 TS1550DSP A-309 $559
TS1310LSP A-306 $457 TS1550HSP A-309 $573
TS1310RSP A-306 $457 TS1550LSP A-309 $533
TS1315DSP A-306 $470 TS1550RSP A-309 $533
TS1315HSP A-306 $507 TS155DSP A-306 $559
TS1315LSP A-307 $457 TS155HSP A-306 $573
TS1315RSP A-307 $457 TS155LSP A-306 $533
TS1320DSP A-307 $470 TS155RSP A-306 $533
TS1320HSP A-307 $507 TS1560DSP A-309 $559
TS1320LSP A-307 $457 TS1560HSP A-309 $573
TS1320RSP A-307 $457 TS1560LSP A-309 $533
TS1330DSP A-307 $470 TS1560RSP A-309 $533
TS1330HSP A-307 $507 TS1810DSP A-306 $580
TS1330LSP A-308 $457 TS1810HSP A-306 $619
TS1330RSP A-308 $457 TS1810LSP A-306 $551
TS1340DSP A-308 $470 TS1810RSP A-306 $551
TS1340HSP A-308 $507 TS1815DSP A-307 $580
TS1340LSP A-308 $457 TS1815HSP A-307 $619
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-181
Catalog Index
Part Number Page(s) Price
TS2630HSP A-308 $983
TS2630LSP A-308 $868
TS2630RSP A-308 $868
TS2640DSP A-308 $918
TS2640HSP A-308 $983
TS2640LSP A-308 $868
TS2640RSP A-308 $868
TS2650DSP A-309 $918
TS2650HSP A-309 $983
TS2650LSP A-309 $868
TS2650RSP A-309 $868
TS265DSP A-306 $918
TS265HSP A-306 $983
TS265LSP A-306 $868
TS265RSP A-306 $868
TS2660DSP A-309 $918
TS2660HSP A-309 $983
TS2660LSP A-309 $868
TS2660RSP A-309 $868
URMP D02 A-385 $56
URMP V18 A-385 $56
URMP V23 A-385 $56
URMP V30 A-385 $56
URMP V43 MPW100 A-385 $56
URMP V47 A-385 $56
WEG180-USEM A-418 $177
WEG250-280-REL A-418 $181
WEG250-280-USEM A-418 $181
WEG280-SIEM A-418 $181
WEG320-REL A-418 $202
WEG320-SIEM A-418 $202
WEG320-USEM A-418 $202
WEG360-400-REL A-418 $224
WEG360-400-SIEM A-418 $224
WEG360-400-USEM A-418 $224
WEG444/5-REL A-418 $228
WEG444/5-SIEM A-418 $228
WEG445/7-447/9-REL A-418 $263
WEG445/7-447/9-SIEM A-418 $263
WEG445/7-447/9-USEM A-418 $263
Catalog Index
Catalog Index
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) B-183
Notes:
Catalog Index
WEG’s goal is to provide quick and accurate quotes to our customers and to insure orders can be processed
accurately.
To assist customers in this process WEG has developed the form below to insure the minimum information required
is included on the request, and to guide you where options may also be desired.
The form highlights in red the minimum information required to define a motor. Today, this includes destination
(Country) to insure we comply with Energy Efficiency and certification regulations, and avoid rejection of the motor
at the border.
This interactive form is available on our website (www.weg.net) or by scanning the QR code below. While we
do not require use of this form, we encourage customers to be aware of the minimum information required and
include it with their requests.
4. RPM
Inquiry Form for AC Low Voltage Motors
6. Enclosure
Project: Specification:
MOTOR DESCRIPTION:
* Application * Motor Destination
Other:
* Efficiency
Other:
* Enclosure
8. Phase
* Terminal Box
Item * Qty * HP * kW * RPM * Frame * Voltage (V) * Freq. (Hz) * Mount * Type of Flange
Location (DE)
9. Hz 2
10. Voltage
4
* If the motor is for replacement, please include the S/N in the nameplate, nameplate pictures, drawings, all applicable documentation available.
ELECTRICAL FEATURES:
Inverter Operation No Yes Speed range: Torque: Insulated DE Endshield + NDE Brush
Division Other
LOAD INFORMATION:
Load Torque Axial Load Application point (x )
Load Inertia Radial Load § Distance from shaft shoulder to belt pull center.
ACCESSORIES:
Space heaters Vibration sensor
Bearing Protection Stainless Steel Fasteners Additional Terminal Box Internal Anti-Corrosion Epoxy Coating
Routine Test (Witnessed) Type Test (Witnessed) Noise Level Test (Un-witnessed)
DOCUMENTATION REQUIRED:
Data Sheet Drawing Performance Curves Other
2020
Modifications
Parts &
Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) A-397
In-House Modifications
48 / 56
NEMA FRAME / 140T / 210T 250T 280T 320T 360T 400T 440T L440/500 580T
180T
63 / 71 /
IEC FRAME 80 / 90 / 132S/M 160M/L 180M/L 200M/L 225S/M 250S/M 280S/M 315S/M 355M/L
100L/112
REPLATE ADD CUSTOMER PART NUMBER AND / OR OTHER CHANGES SUCH AS VOLTAGE, HZ, ETC.
MOD. NUMBER NAMEPLATE
Main Nameplate Change -
N-10 NET 25 25 25 25 25 25 25 25 25 25
Stainless Steel
Additional Nameplate -
N-20 NET 25 25 25 25 25 25 25 25 25 25
Stainless Steel
Additional Rating/Service -
N-25 NET 25 25 25 25 25 25 25 25 25 25
Adhesive Mylar only
ELECTRICAL
INSTALLATION OF SPACE HEATERS, THERMISTORS, THERMOSTATS & EXTENDING MOTOR LEADS
ADD-ON’S
48 / 56
NEMA FRAME / 140T / 210T 250T 280T 320T 360T 400T 440T L440/500 580T
180T
63 / 71 /
IEC FRAME 80 / 90 / 132S/M 160M/L 180M/L 200M/L 225S/M 250S/M 280S/M 315S/M 355M/L
100L/112
E-25 120V Space heater - XP motors LIST 1010.00 1012.00 1103.00 1104.00 1104.00 1107.00 1197.00 1202.00 1202.00 1206.00
E-26 240V Space heater - XP motors LIST 1010.00 1012.00 1103.00 1104.00 1104.00 1107.00 1197.00 1202.00 1202.00 1206.00
E-30 120V Space Heater LIST 204.09 206.55 297.34 299.45 299.45 302.26 393.04 398.64 398.64 403.92
240V Space Heater (Operating
E-40 LIST 204.09 206.55 297.34 299.45 299.45 302.26 393.04 398.64 398.64 403.92
on 240V)
240V Space Heater (Operating
E-50 LIST 217.32 221.23 312.01 315.36 315.36 319.83 410.61 419.55 419.55 427.93
on120V)
E-55 Bearing RTDS ( DE and NDE) LIST N/A N/A N/A N/A 1446.01 1446.01 1446.01 1446.01 1446.01 1446.01
Winding RTD’s 100 Ohm
E-60 Platinum (One Per phase - 3 LIST 792.77 792.77 792.77 792.77 792.77 883.55 883.55 883.55 883.55 974.33
lead PT100’s)
Thermistors (One per phase
E-70 LIST 301.54 301.54 301.54 301.54 301.54 392.32 392.32 392.32 392.32 483.10
@155ºC)
Thermostats (One per phase
E-80 LIST 167.25 167.25 287.99 287.99 287.99 378.77 378.77 378.77 378.77 445.04
@155ºC)
Provision for vibration detector
E-95 LIST N/A N/A 363.13 363.13 363.13 363.13 363.13 363.13 363.13 363.13
(drilled and tapped)
Installation of Stubshaft Only -
E-99 (Only valid for NEMA Premium® LIST N/A N/A N/A 345.00 345.00 345.00 475.00 475.00 475.00 475.00
280T & above) 5/8” stub shaft
Installation of Encoder - (Only
valid for NEMA Premium®
E-100 LIST N/A N/A N/A 1201.12 1201.12 1201.12 1291.90 1291.90 1291.90 1291.90
280T & above) Dynapar HSD38
Modifications
Installation of Encoder on
VECTOR DUTY MOTORS
E-105 (FRAMES 140- 250 - Dynapar LIST 949.02 949.02 949.02 N/A N/A N/A N/A N/A N/A N/A
HSD38 1024PPR with 5/8”
bore)
MODIFY BRAKE RECTIFIER TO
E-110 LIST 164.16 164.16 164.16 164.16 N/A N/A N/A N/A N/A N/A
ACCEPT 460V
COOLING ALUMINUM FAN MATERIAL CHANGE OUT AND INSTALLATION OF BLOWER KIT (FORCED VENTILATION)
Fan Material (ALUMINUM)
F-180 LIST 1250.55 1287.15 1287.15 1315.82 1422.28 1627.06 1717.84 1867.77 2147.10 3174.81
Note #4
Forced Ventilation: Blower
F-190 Cooling (w/o Encoder) LIST 1258.63 1371.79 1439.89 1485.12 1593.32 1797.63 1797.63 2186.87 2452.77 2478.41
(Not valid for 48 & 56 frames)
Forced Ventilation: Blower
F-195 Cooling (w/ Encoder) LIST 4337.60 4624.41 4782.99 4896.15 4950.84 5495.06 5955.95 6552.15 6817.40 7417.96
(Not valid for 48 & 56 frames)
F-200 Cast Iron Fan Cover List 159.50 144.80 Standard Standard Standard Standard Standard Standard Standard Standard
continued on next page
Modifications
Parts &
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) A-399
In-House Modifications
48 / 56
NEMA FRAME / 140T / 210T 250T 280T 320T 360T 400T 440T L440/500 580T
180T
63 / 71 /
IEC FRAME 80 / 90 / 132S/M 160M/L 180M/L 200M/L 225S/M 250S/M 280S/M 315S/M 355M/L
100L/112
BEARINGS BEARING CHANGE OUTS & SHAFT GROUNDING MODIFICATION
Ball to Roller Bearing
B-200 LIST N/A N/A 527.09 616.23 645.92 1024.27 1337.85 1812.35 1890.17 1890.17
Conversion Note #3 & #5
Roller to Ball conversion Note
B-210 LIST N/A N/A N/A N/A N/A N/A 1270.28 1636.34 1636.34 1636.34
#3 & #6
Convert to Insulated Bearing -
B-220 LIST 564.72 568.44 673.10 852.65 852.65 1347.85 1347.85 1721.28 1888.88 1888.88
NDE ONLY
Convert to 2RS (sealed
B-225 LIST 210.73 221.40 277.54 312.21 346.87 835.42 1077.96 N/A N/A N/A
bearings)
External AEGIS shaft Grounding
B-230* LIST 258.44 258.44 258.44 262.57 262.57 273.74 273.74 402.23 530.73 871.87
Ring - DE ONLY
Internal AEGIS Ring for W22 w/o
B-231* LIST N/A N/A 582.00 590.00 610.00 782.00 893.00 1143.00 N/A N/A
a Flange
Internal AEGIS Ring for W22
B-232* LIST 336.00 366.00 582.00 590.00 610.00 782.00 893.00 1143.00 N/A N/A
with any Flange
Internal AEGIS Ring for W22
B-233* LIST N/A N/A 582.00 590.00 610.00 782.00 893.00 1143.00 N/A N/A
JP/JM
Internal AEGIS Ring for W22-
B-234* LIST 355.00 366.00 582.00 590.00 610.00 782.00 893.00 1143.00 N/A N/A
IEEE 841 (All Mtg)
Internal AEGIS Ring for ODP
B-235* LIST N/A N/A N/A N/A N/A 782.00 893.00 1143.00 N/A N/A
w/o Flange
Internal AEGIS Ring for ODP
B-236* LIST N/A N/A 501.00 N/A N/A 782.00 893.00 1143.00 N/A N/A
with C-Flange
Internal AEGIS Ring for ODP
B-237* LIST N/A N/A 501.00 N/A N/A 782.00 893.00 1143.00 N/A N/A
JP/JM
Spring Loaded Grounding Brush
B-240* LIST 205.45 205.45 205.45 214.53 214.53 214.53 234.64 321.79 321.79 321.79
- DE Only
Installation of Helwig Grounding
B-250* Brush (Includes Brush and LIST N/A N/A N/A N/A N/A 316.56 316.56 341.12 341.12 341.12
Brush Holder - DE only)
High Frequency Terminal Box
B-255 Grounding Strap (For use with LIST 486.00 486.00 486.00 486.00 486.00 486.00 608.00 608.00 608.00 608.00
VFD driven motors)
Insulated ODE End Bell
B-260 conversion (TEFC 360 frames LIST N/A N/A N/A N/A N/A 883.87 1177.85 1474.36 1581.09 1834.53
and above - W22 only)
Low Temp Bearing Grease
change out (Aeroshell 22 Low
B-270 Temp Grease / LIST N/A N/A 370.34 474.47 509.78 946.26 1036.82 1777.46 1777.46 1830.08
-50°C to 50°C) - Requires
bearings change out
Modifications
ENVIRONMEN-
ENVIRONMENTAL CONDITIONS
TAL
EV-300 Stainless Steel Breather Drains LIST 328.21 328.21 418.99 418.99 418.99 509.78 509.78 509.78 600.56 600.56
Stainless Steel Hardware (Only
EV-310 external bolts - End bell , LIST 551.68 551.68 551.68 551.68 621.51 621.51 621.51 621.51 782.12 782.12
Terminal box cover & Fan cover)
Grounding Provisions on Frame
EV-320 LIST 251.40 251.40 251.40 251.40 382.68 382.68 382.68 Standard Standard Standard
(TEFC cast iron only)
Tropicalization/Anti-Fungal
EV-330 LIST 178.07 223.46 223.46 265.36 356.15 356.15 488.83 488.83 488.83 488.83
Protection
IP56 Modification (GEN PRP
EV-335 LIST 1031.01 1031.01 1031.01 1031.01 1031.01 1121.79 1121.79 1121.79 1121.79 1121.79
TEFC / IEC)
EV-340 IP56 Modification (IEEE 841) LIST 81.00 93.00 128.00 186.00 244.00 314.00 372.00 430.00 430.00 430.00
EV-342 IP65 Modification (IEEE 841) LIST 98.00 112.00 154.00 223.00 293.00 377.00 447.00 517.00 517.00 517.00
EV-345 IP56 Modification (XP) LIST 98.00 112.00 154.00 223.00 293.00 377.00 447.00 517.00 517.00 517.00
EV-350 Sealant on Joints LIST 198.32 198.32 198.32 198.32 305.87 305.87 305.87 413.41 413.41 413.41
External Epoxy Paint (per below
EV-360 LIST 620.11 620.11 620.11 801.68 801.68 801.68 1240.22 1240.22 1240.22 1240.22
color chart only)
Top Coat Paint Color Change
EV-380 LIST 396.65 396.65 396.65 520.95 520.95 520.95 645.25 645.25 645.25 645.25
(per below color chart only)
FIN-FAN Modification (IEEE 841
EV-390 LIST 572.00 608.00 723.00 812.00 812.00 1110.00 N/A N/A N/A N/A
motors only)
Addition of Rodent Screens
EV-400 LIST N/A N/A 740.00 971.00 971.00 971.00 971.00 971.00 971.00 971.00
(Cast iron ODP motors only)
Notes:
1. CONSIDER TENV VECTOR DUTY MOTOR (If rating is available) = *%
Modifications
2. NOT AVAILABLE AS MODIFICATION = N/A
3. CONTACT FOR QUOTE WITH LOAD DATA FOR EVALUATION Parts &
4. MACHINING REQUIRED
5. ROLLER BEARINGS SIZES NOT AVAILABLE FOR 210T FRAMES AND SMALLER
6. STOCK PRODUCT NOT AVAILABLE WITH ROLLER BEARINGS BELOW NEMA 400T
7. PRICING IS SUBJECT TO FUTURE UPDATES THAT MAY ALTER WHAT IS REFLECTED IN PRINTED MATERIALS.
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) A-401
Factory Built Modifications
BEARINGS
NEMA FRAME SERIES 48 56 - 140T 180T 210T 250T 280T 320T 360T 400T 440T L440/500 580
63 UP
IEC Frame Series - - 90 100/112 132 160 180 200 225 250 280 315 355
80
Ball to Roller (IV, VI, VIII P.)
n/a n/a n/a n/a n/a 566 645 772 863 974 n/a n/a n/a n/a
D.E.:
ZZ Bearings (Double shield-
ed): Added std std std std std std 96 321 632 n/a n/a n/a n/a n/a
when manufacturing
2 RS Bearing (D.E. and N.D.E.)
38 38 38 38 61 67 207 293 973 1364 n/a n/a n/a n/a
Added when manufacturing
Insulated (Hybrid) NDE
n/a n/a n/a 417 671 700 2163 2318 2755 n/a n/a n/a n/a n/a
Bearing
Insulated Bearing Housing
n/a n/a n/a n/a n/a n/a n/a n/a n/a 1064 1239 1539 1539 2265
NDE Endshield
COOLING
NEMA FRAME SERIES 48 56 - 140T 180T 210T 250T 280T 320T 360T 400T 440T L440/500 580
63 UP
IEC FRAME SERIES 90 100/112 132 160 180 200 225 250 280 315 355
80
Fan Material : - Aluminum
n/a n/a n/a 64 110 118 132 151 175 218 255 298 348 n/a
Added when manufacturing
Fan Material : - Cast Iron
n/a n/a 34 50 61 79 107 112 185 185 216 300 527
Added when manufacturing
Fan Material : - Bronze
n/a n/a n/a 238 532 865 1068 1,493 1,508 2,627 2,627 2,627 2,627 2,971
Added when manufacturing
Forced Ventilation (TEBC) : n/a n/a n/a 1,406 1,513 1,575 1,965 2,286 2,448 2,921 3,139 4,275 5,773 7,383
TEAO
54 54 54 54 81 94 97 176 176 370 370 380 439 520
Added when manufacturing
Drip Cover
21 21 55 55 58 82 98 141 166 191 191 234 234 330
Added when manufacturing
Textile Fan Cover
n/a n/a n/a 61 63 90 108 156 183 220 220 n/a n/a n/a
Added when manufacturing
DEGREE OF PROTECTION
NEMA FRAME SERIES 48 56 - 140T 180T 210T 250T 280T 320T 360T 400T 440T L440/500 580
63 UP
IEC FRAME SERIES - - 90 100/112 132 160 180 200 225 250 280 315 355
80
TEFC IP55 with Lip Seal 33 33 33 33 58 76 95 113 132 151 175 213 249 502
TEFC IP55 with Oil Seal n/a n/a 55 55 85 104 112 133 143 171 200 231 268 -
TEFC IP55 with Labyrinth seal
n/a n/a 196 196 220 220 299 315 354 463 511 511 579 1380
or Nilos Ring
TEFC IP56 w/ Oil Seals n/a n/a n/a 75 118 176 267 383 498 441 655 1724 2041 -
Modifications
n/a n/a n/a 230 277 401 501 643 861 825 1023 2143 2674 3815
(labyrinth)
TEFC IP65 w/ Oil Seals n/a n/a n/a 75 118 176 267 383 498 441 655 1724 2041 -
TEFC IP65 w/ Taconite
n/a n/a n/a 167 205 303 398 528 709 659 857 1954 2394 3366
(labyrinth) Seals
TEFC IP65 w/ W3seals
n/a n/a n/a 230 277 401 501 643 861 825 1023 2143 2674 3815
(labyrinth)
TEFC IP66 w/ W3seals
n/a n/a n/a 273 344 496 662 853 1112 1185 1515 3310 4009 5687
(labyrinth)
63 UP
IEC FRAME SERIES - - 90 100/112 132 160 180 200 225 250 280 315 355
80
Thermistors (1/phase) PTC: n/a n/a 142 142 142 142 142 142 142 142 142 142 142 142
Thermostats (1/phase) NC: n/a n/a 142 142 142 142 142 142 142 142 142 142 142 142
Bearing RTD’s PT100 (1/bearing) n/a n/a n/a n/a n/a n/a 1215 1215 1215 1215 1215 1215 1215 1215
Winding RTD’s PT100 (1/phase): n/a n/a 1052 1052 1052 1052 1052 1052 1052 1052 1052 1052 1052 1052
Space Heater n/a n/a 37 37 37 37 54 54 54 109 109 109 109 217
Class of Insulation : -”F” Add 5% to motor list price Add 3% to motor list price
Class of Insulation : -”H” Add 10% to motor price
Epoxy varnish impregnation
Add 5% to motor price
Enclosed motors only
Above 600 V (1000 Max.) Add 10% to motor price
FLANGES
L440/
NEMA FRAME SERIES 48 56 - 140T 180T 210T 250T 280T 320T 360T 400T 440T 580
500
63
IEC FRAMES SERIES - - UP 90 100/112 132 160 180 200 225 250 280 315 355
80
FLANGE TYPE Enclosure List Price
TEFC 28 28 28 28 38 51 68 99 121 442 491 606 716 1,623
ODP 28 28 - 34 38 51 68 85 100 394 446 560 - -
“C” Flange
Explosion
- - 61 61 70 76 103 147 182 665 736 1,384 1,384 -
Proof
TEFC - - 50 59 70 79 117 136 192 637 762 915 1,051 1,863
ODP - - - - - - 107 126 170 537 685 855 - -
“D” Flange
Explosion
- - - 89 89 103 130 189 246 736 1,067 1,311 1,577 2,364
Proof
Modifications
Parts &
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) A-403
Factory Built Modifications
Painting Plan Description
ADHERENCE
PRIMER INTERMEDIATE FINISH COAT GRADE
Painting Surface ASTM
Recommended Uses Preparation
Plan Film Film Film
Grade
Paint Thickness Paint Thickness Paint Thickness D-3359
(μm) (μm) (μm)
Non aggressive environments;
Synthetic Synthetic alkyd
201A Not recommended for direct exposure to Sa 2 ½ 20 – 55 - - 40 – 60 3B to 5B
alkyd enamel
solvents, alkalis and acid vapors
Aggressive sheltered industrial
Synthetic Epoxy
environments; Chemical, pulps and Epoxy
202E Sa 2 ½ alkyd 20 - 55 20 - 30 polyamide 100 – 140 3A to 5A
paper industries, resistant to acid Isocyanate
enamel
steams, alkalis and solvents vapors
Aggressive sheltered or non-sheltered
industrial environments; Chemical, 1 coats
Synthetic
mining, pulp and paper industries, Epoxy Aliphatic
202P Sa 2 ½ alkyd 20 - 55 20 - 30 60 - 100 3A to 5A
resistant to acid steams, alkalis and Isocyanate polyurethane
solvents vapors; Indicated to food enamel
processing motors – USA and Europe
Environments low aggressiveness; Not Synthetic Synthetic
Synthetic alkyd
203A recommended for direct exposure to Sa 2 ½ alkyd 20 – 55 powdered 30 a 45 30 – 45 3B to 5B
enamel
solvents, alkalis and acid vapors alkyd
Painting of equipment, structures in
general subject to moderate and high Polyamide
Polyamide
211E aggressive level such as: pulp and paper Sa 2 ½ Epoxy 90 - 130 - - 90 - 130 3A to 5A
Epoxy
plants, steel and iron and chemical
industries
Painting of equipment, structures in
general subject to moderate and high Polyamide Aliphatic
211P aggressive level such as: pulp and paper Sa 2 ½ Epoxy 90 - 130 - - polyurethane 65 – 90 3A to 5A
plants, steel and iron and chemical enamel
industries
Non sheltered marine environment; Zinc ethyl
Epoxy Polyamide
212E Resistant to acid, alkalis and solvent Sa 2 ½ silicate 70 - 90 90 – 130 90 – 130 3A to 5A
polyamide Epoxy
spills
Non sheltered marine environment; Zinc ethyl Aliphatic
Epoxy
212P Resistant to acid, alkalis and solvent Sa 2 ½ silicate 70 - 90 90 – 130 polyurethane 65 – 90 3A to 5A
polyamide
spills enamel
Special Shaft
NEMA FRAME SERIES 48 56 - 140T 180T 210T 250T 280T 320T 360T 400T 440T 500 580
IEC FRAMES SERIES - - 63 UP 80 90 100/112 132 160 180 200 225 250 280 315 355
Second Shaft End (standard
n/a n/a 60 72 87 101 104 189 189 392 396 407 752 879
dimension)
Threaded center hole in the
n/a n/a 33 33 41 51 85 136 155 std std std - -
shaft end
420 Stainless steel shaft end Add 10% to motor list price
Modifications
315 Stainless steel shaft end Add 15% to motor list price
Parts &
Special Shaft
Special Shaft Diameter (Type
n/a n/a 58 58 87 130 151 189 209 392 396 407 752 879
“A” mod)
Special Shaft Length (Type
n/a n/a 63 63 96 113 120 208 216 446 450 473 821 987
“B” mod)
Special Shaft Diameter &
n/a n/a 72 72 125 141 158 249 262 574 579 628 965 1117
Length (Type “C” mod)
Special Shaft Diameter,
Length & Tapered (Type “D” n/a n/a 79 79 130 156 174 271 288 646 654 716 1023 1254
mod)
Balance - Reduced n/a n/a n/a 33 79 91 100 125 134 156 167 188 507 616
Balance - Special n/a n/a n/a 58 87 133 159 180 217 250 283 317 846 1044
Terminal Box*
L440/
NEMA FRAME SERIES 48 56 - 140T 180T 210T 250T 280T 320T 360T 400T 440T 580
500
IEC FRAMES SERIES - - 63 UP 80 90 100/112 132 160 180 200 225 250 280 315 355
Cable Gland - Brass n/a n/a 33 33 50 50 182 182 182 567 567 567 567 714
Terminal Block (6 pin): n/a n/a 9 9 14 23 23 41 41 197 197 380 380 753
Testing:
L440/
NEMA FRAME SERIES 48 56 - 140T 180T 210T 250T 280T 320T 360T 400T 440T 380
500
IEC FRAMES SERIES - - 63 UP 80 90 100/112 132 160 180 200 225 250 280 315 355
Routine Test - Unwitnessed - - 381 381 381 513 513 513 513 622 622 718 877 877
Routine Test - Witnessed - - 1215 1215 1215 1427 1427 1427 1427 1683 1683 1903 2368 2368
Type Test - Unwitnessed - - 586 586 586 769 769 769 769 952 952 1208 1768 1768
Type Test - Witnessed - - 1419 1419 1419 1632 1632 1632 1632 1939 1939 2195 2318 2318
Vibration Test - - 183 183 183 205 205 205 205 285 285 403 559 559
Noise Level Test - - 213 213 213 242 242 242 242 322 322 462 638 638
Test Description:
Routine Test Vibration Test
– Winding resistance check (at cold) – Vibration measure on as many as 6 points, depending on the
– Locked Rotor test (torque, current and absorbed power) mechanical envelope of the motor allowing access to all the
– No-load test (current and absorbed power) reading points
– Hi-pot – Test performed with half key on the shaft
– Insulation resistance – Performed with motor on an elastic mounting base (rigid base
when requested)
– Accessories check for continuity (if applicable)
Modifications
Type Test Noise Test Parts &
– Winding resistance check (at cold) – Performed at no load on an acoustic chamber
– Measurements at 1m (~ 3.3ft) distance from the motor
– Locked Rotor test (torque, current and absorbed power)
– Readings:
– Load test, including temperature rise with constant output power at • Total sound pressure level of the motor at 4 points, in dB(A)
full load)
• Bearings sound pressure level in dB(A)
– Breakdown Torque test
• Frequency spectrum of the global noise for the point with the most
– No-load test (current and absorbed power) intense reading, at 50% and 100% of rated voltage
– Vibration test on motors 364/5T and above • Frequency spectrum of the bearings noise for the point with the
– Hi-pot most intense global reading, at 50% and 100% of rated voltage
– Insulation resistance
– Accessories check for continuity (if applicable)
Data subject to change without notice. Can’t find what you are looking for? Call 1-800-ASK-4WEG (275-4934) A-405
- Models in blue text are NEMA Premium Efficiency
- Models in green text are NEMA Super Premium Efficiency
Catalog Notes
Rating is suitable for 1.0SF @ 50Hz. Also suitable for
1 1.0 Service Factor 31
next lower HP @ 1.15SF 50Hz
2 Aluminum Frame with Removable Feet 32 Suitable for 1.15SF @ 50°C ambient
3 Automatic Reset Thermal Overload Protector 33 Suitable for 380V 60Hz when wired as YY (double WYE)
7 F2 Mount 37 Design A
11 Metal fan - Not suitable for division 2 41 Also rated 230/460V 50Hz 1.0 SF
18 Z-Frame; Bigger Shaft Diameter and Bearings 48 Motor suitable for safe area only
29 Standard Efficiency
Dump Valves
DVU Series
The DVU Series features pneumatically controlled
dump valves. The valves open and close automatically
by pneumatic control from FW Murphy level controller
and dump valve operator. Diaphragm actuated, the DVU
series dump valves operate at 30–70 psi (207–483 kPa)
[2.07–4.83 bar] and up to 2000 psi (13.8 MPa) [138 bar]
vessel pressure (depending on the model).
A key benefit of this design is a hex union that provides
the ability to replace the seat without removing the valve
from piping.
The DVU Series is compatible with FW Murphy level
controllers. They feature a soft seat valve and manual
valve operator.
Designed for gas compressor scrubbers, the DVU
Series can be used to dump any liquids compatible with
its materials of construction.
Dimensions
Specifications
DVU2115
DVU2105
DVU150
in.
(mm)
Seat: ANSI 303 SS
7.50 7.50 7.50 7.50 7.50 Plug/Seal: ANSI 303 SS / 95 durometer urethane
A
(191) (191) (191) (191) (191) Stainless Steel Models:
8.0 8.0 8.0 6.75 6.75
B
(203) (203) (203) (171) (171) Body/Union Nut: ANSI 316 SS
C
2.75 2.75 2.75 2.0 2.0 Stem: ANSI 316 SS
(70) (70) (70) (51) (51)
Stuffing Box: ANSI 316 SS
1.0 1.0 1.0 1.0 1.0
D
(25) (25) (25) (25) (25) Seat: ANSI 316 SS
E
2-11.5 2-11.5 2-11.5
1-11.5 NPT
1-11.5 Plug/Seal: ANSI 316 SS / 95 durometer urethane
NPT NPT NPT NPT
1-11.5 1-11.5 1-11.5 3/4˝-14 1/2˝-14
F
NPT NPT NPT NPT NPT
.81 .81 .81 0.73 0.73
G
(20.57) (20.57) (20.57) (19) (19)
In order to consistently bring you the highest quality, full-featured products, we reserve the right to change our specifications and designs at any time.
FW MURPHY product names and the FW MURPHY logo are proprietary trademarks. This document, including textual matter and illustrations, is copyright
protected with all rights reserved. (c) 2020 FW MURPHY. A copy of our typical warranty may be viewed or printed by going to www.fwmurphy.com/warranty.
Scrubber Level Systems (SLS)
Working
Part Trim Size Max.
Model and Description Notes
Number Model Inlet Outlet inches (mm) Press.
DVU2120 DVU2120 2 NPT 1 NPT 0.500 (12.7) 2000 psi
DVU2115 DVU2115 2 NPT 1 NPT 0.571 (14.5) 1500 psi
Use Model Number
Models
Pneumatic Model
LS200 Liquid Level Switches with 2 in. NPT mounting
are float activated to operate an electrical SPDT snap- Dimensions
switch (optional DPDT on some models) for alarm or
shutdown of an engine or electric motor. The LS200 LS200, L1100
connects directly into the vessel wall and can be used
with an FW Murphy weld collar or FW Murphy external
float chamber.
LS200NDVOR is a float-activated, pneumatic-vent
level device used to operate DVU Series dump valves
or similar devices. It provides a 2 in. NPT mounting
with a pneumatic output for interfacing with pneumatic
devices such as the FW Murphy pneumatic dump valve
or other pneumatic instrumentation.
LS200NDVO is the Dump Valve Operator (DVO)
without the pressure regulator for those applications
where the system provides a filter regulator for
instrument-quality air or gas as the control medium. LS200 L1100*
LS200N is the pneumatic level switch without the A 10.16 in (258 mm) 11 in. (279 mm)
DVO or filter regulator. Please note: pneumatic media B 3.44 in. (87 mm) 3.50 in. (189 mm)
devices require clean, dry, instrument-quality air or gas.
C 1.75 in. (44 mm) 1.56 in. (40 mm)
D 2.80 in. (71 mm) 3.4 in. (71 mm)
E 2 NPT 1-1/2 NPT
* The L1100 has been discontinued and remains in the table for
reference purposes only.
In order to consistently bring you the highest quality, full-featured products, we reserve the right to change our specifications and designs at any time.
FW MURPHY product names and the FW MURPHY logo are proprietary trademarks. This document, including textual matter and illustrations, is copyright
protected with all rights reserved. (c) 2021 FW MURPHY. A copy of our typical warranty may be viewed or printed by going to www.fwmurphy.com/warranty.
Application Data
Pipe Data
Nom. Size O.D. Schedule Wall Thickness Inside Diameter
(inches) (inches) Number (inches) (inches)
3 3.5 40ST 0.216 3.068
3 3.5 80XS 0.3 2.9
4 4.5 40ST 0.237 4.026
4 4.5 80XS 0.337 3.826
Minimum Clearance
Insertion Depth (inches) Vertical Clearance (inches)
Product Std. w/ 1” Extension Std. w/ 1” Extension
LS200 4.6 5.6 2.8 3.15
LS200N 5.43 6.4 3.3 3.9
L1200 4.65 5.7 3.9 4.55
L1200N 5.6 6.7 5.3 6.9
L1100 4.4 5.4 3.4 4.05
Models L1200, L1200N and L1100 are discontinued and remain in the table for reference purposes only.
LS200N, LS200NDVO and LS200NDVOR with Dump Valve Operator, Pressure Regulator and Gage
Filter/
CAUTION: Regulator
20BPG-75
LS200 Series parts are not Pressure Gage Nipple
interchangeable with Exhaust Supply 1/8 NPT
the L1200 Series. x 1/8 NPT
TOP VIEW
DVO
Manual
Valve
Operator Signal out 3.53 in. Regulator/Gage
(90 mm) 4.59 in. Assembly
(117 mm)
Accessories
Refer to LS200 installation and operation manual LS200 Minimum Allowable Specific Gravity
for additional information.
External Float Chamber Model Float Extension Pressure Specific
Operating Pressure: 2000 psi (13.8 MPa) [138 bar] Length (inches) (psi) Gravity
Operating Temperature: 400° F (204° C) 0 0.55
LS200 2000
Weld Collar 1 0.7
Operating Pressure: 2000 psi (13.8 MPa) [138 bar] 0 0.63
Operating Temperature: 400° F (204° C) LS200NDVO 2000
Float Shaft Extension 1 0.73
LS200 Series: 1 in.
Specifications
All Models LS200NDVO
Listed for cCSAus Class 1, Div 1, Grps C & D Locations Process Connection: 2” NPT
Canadian Registration Numbers (issued by ABSA): DVO Valve: 3-way N.C. w/manual operator, all connections 1/8”
LS200: 0F01476.2 NPT
L1200, L1200N and L1100 Series: 0F01476.0 LS200N
Body: Nickel-plated; optional 316 stainless steel Process Connection: 2” NPT
Float: 304 stainless steel Vent Valve: 2-way N.C. w/ 1/16 in. (2 mm) orifice and Viton seat;
Pressure Rating: 2000psig (13.8 MPa) [138 bar] Inlet: 1/8” NPT; Outlet: 3/8” NPT
LS200
O-ring: Viton Electrical
Process Connection: 2” NPT
Temperature Rating: -20° to 300°F (-29° to 149°C)
Electrical: SPDT std.
Wiring: 18 AWG x 36 in. (1.0 mm2 x 916 mm)
LS200NDVOR
Process Connection: 2” NPT
DVO Valve: 3-way N.C. w/manual operator, all connections 1/8”
NPT (minimum 30 psig required)
Filter/Pressure Regulator Set:
Regulator: 0 to 75 psig (0 to 517 kPa) [0 to 5.17 bar] range
Maximum Input Pressure: 300 psig (2.07 MPa) [20.7 bar]
How to Order
Options listed below. All configurations may not be available. Call your sales representative or FW Murphy for more
information.
Note: Refer to the Installation and Operation manual 00-02-0671 for replacement parts at fwmurphy.com.
Liquid Level Switches
Series LS200, LS200N and LS200NDVOR
Certification ..................................................................................................................1
LS200 ...........................................................................................................................1
LS200NDVOR ..............................................................................................................2
LS200NDVO ................................................................................................................3
LS200N ........................................................................................................................3
Pressure Vessel Installation: LS200 and LS200N ................................................................4
Specifications ...........................................................................................................................11
Certification
Listed for cCSAus Class I, Div 1, Grps C & D locations.
Canadian Registration Number 0F01476.2
Minimum Allowable Specific Gravity for LS200
Table 1
LS200 Minimum Allowable Specific Gravity
Model Float Extension length Pressure Specific Gravity
(inch) (psi)
0 0.55
LS200 1 2000 0.7
6 1
0 0.63
LS200NDVO 1 2000 0.73
6 1.02
Note: The 6-inch float extension length is for reference only and is not available for
the LS200 Series.
LS200
LS200 Liquid Level Switches with 2-inch NPT mounting are float activated to operate an
electrical SPDT snap-switch (optional DPDT on some models) for alarm or shutdown of an
engine or electric motor. The LS200 connects directly into the vessel wall and can be used
with an FW Murphy weld collar (P/N 15050375) or FW Murphy external float chamber.
Table 2
LS200
A 10.18 in. (259 mm)
LS200 E 2 NPT
Section 15 00-02-0671
2021-01-04 -1-
LS200NDVOR
LS200NDVOR is a float-activated, pneumatic-vent level device used to operate dump valves
or similar devices.
The LS200NDVOR provides a 2-inch NPT mounting with a pneumatic output for interfacing
with pneumatic devices such as our FW Murphy pneumatic dump valve or with other
pneumatic instrumentation.
Pneumatic media devices require clean, dry, instrument-quality air or gas. This unit is supplied
with a pressure regulator, filter and FW Murphy 20BPG pressure gage for improved system life
and trouble-free operation.
LS200NDVOR pneumatic level switch with dump valve operator, pressure regulator and
gage
Section 15 00-02-0671
2021-01-04 -2-
LS200NDVO
Shown below is the Pneumatic level switch with Dump Valve Operator (DVO) without the
pressure regulator (for those applications where the system provides a filter regulator for
instrument-quality air or gas as the control medium).
LS200N
Shown below is the Pneumatic level switch without the DVO and filter regulator.
Section 15 00-02-0671
2021-01-04 -3-
Pressure Vessel Installation: LS200 and LS200N
Direct Installation into the Wall of the Pressure Vessel
CAUTION: Determine that the float travel is not obstructed by the
coupling in the vessel wall, internal baffles, etc.
Refer to tables 1, 2, 3 and 4 for application data.
Table 4
Minimum Clearance
Product Name Insertion Depth (inches) Vertical Clearance (inches)
Std. w/ 1” Extension Std. w/ 1” Extension
LS 200 4.6 5.6 2.8 3.15
LS 200N 5.43 6.4 3.3 3.9
L 1200 * 4.65 5.7 3.9 4.55
L 1200N * 5.6 6.7 5.3 6.9
Section 15 00-02-0671
2021-01-04 -4-
Installation with a Weld Collar
The weld collar, P/N 15050375, must be welded into the wall of the
pressure vessel according to code standards and good welding
practices.
NOTE: Weld collar 15050375 can be used ONLY with
model LS200.
To complete installation and wiring, follow the instructions for mounting directly into
wall of the vessel and for wiring.
Section 15 00-02-0671
2021-01-04 -5-
Installation and Adjustment for Pneumatic Models
All pneumatic models operate on the vent
principle. The pneumatic signal source must
be clean, dry, instrument-quality air or
natural gas. The input pneumatic signal
must be regulated between 30 and 70 psi
(207-483 kPa) [2 -4.83 bar]. If produced gas is
used as the signal source, it should be taken
after gas passes through the final scrubber. A
suitable filter must be positioned before the
LS200NDVO to prevent liquids and/or
particulates from entering the dump valve
operator.
NOTE: Check filter periodically for wear and tear and elements that
hamper the flow of the pneumatic signal.
2. All pressure connections must be tight and maintained tight so as not to leak air/gas.
Each switch is set to vent on rising level at the factory and should
not need field adjustment. For testing the system, we have
provided the red Manual Valve Operator on the operator pilot valve.
3. You may adjust the valve seat if air/gas begins to leak. Take care when
adjusting as only slight movement is necessary to stop the leakage; excessive
force will bind the seating mechanism. See the instruction below for
adjustment.
Section 15 00-02-0671
2021-01-04 -6-
Replacing and Installing the DVO Assembly
NOTE: When replacing/installing the DVO assembly, tubing and fitting
modifications may be required. We suggest removing the
LS200NDVO/DVOR from the vessel. Relieve pressure from the vessel or
use block valves before removing the LS200NDVO/DVOR.
Tools Needed
2-1/2 inch hex wrench or pipe wrench with smooth jaws / 9/16-inch hex wrench /
Tubing cutters and benders
Instructions
Block off and bleed the instrument gas pressure supply to the LS200NDVO/DVOR.
Remove the tubing between the LS200NDVO/DVOR and the scrubber dump valve,
and remove the supply gas tubing (regulator [-R-] if used).
Remove the LS200NDVO/DVOR from the vessel (optional). LOCKOUT / TAGOUT
after pressure is removed from the system.
If the LS200NDVO/DVOR was removed from the vessel, mount it in a suitable vise on
a workbench (if possible).
Using the proper tools, disconnect the inlet, outlet and exhaust fittings from the existing
DVO. See Figure 1. You will reconnect these to the new DVO in a later step.
NOTE: The following steps must be done with the DVO in the upright position (on top of the
LS200NDVO).
Remove the LS200NDVO/DVOR cover. The use of a strap wrench or a pipe wrench
may help.
With a 9/16-inch hex wrench, loosen the hex head bolt on top of the DVO, and remove
the existing DVO from the body.
Ensure that the adjustable orifice is fully raised upward so that the actuator arm is not
bent when inserted into the body. See Figure 2.
Insert the new DVO into the body. The DVO manual valve operator must face away
from the vessel. See Figure 3.
Section 15 00-02-0671
2021-01-04 -7-
Figure 1 - DVO Figure 2 – Adjustable Orifice
With the DVO aligned over the hex on the LS200NDVO body, tighten the valve using
the 9/16-inch hex wrench. You may need to hold the DVO while tightening to keep it
from rotating.
The pneumatic input signal should be regulated between 30 and 70 psi for proper
setting of the adjustable orifice. With the float in the down position, adjust the
adjustable orifice down until it touches the seat. See Figure 4.
If the DVO is still leaking, make slight adjustments (1/32 turn). Excessive adjustments
will lock up mechanisms. After adjusting, make sure float moves freely up and down.
Replace the LS200NDVO/DVOR cover.
Using the appropriate tools reinstall the inlet, outlet and exhaust fittings to the new
DVO.
NOTE: Use thread sealant on threads only. Do not allow excess sealant to
enter valve.
Connect to the inlet, outlet and exhaust fittings according to installation drawings.
Section 15 00-02-0671
2021-01-04 -8-
Accessories
15050375: Weld Collar
Electrical
Section 15 00-02-0671
2021-01-04 - 10 -
Specifications
All Models
Listed for cCSAus Class I, Div 1, Grps C & D locations
Canadian Registration Number: 0F01476.2
Body: Nickel-plated steel; optional 316 stainless steel
Float: 304 stainless steel
Pressure rating: 2000 psig (13.8 MPa) [138 bar] (LS200 models only)
O-ring: Viton
Process connection: 2” NPT
Temperature rating: -20 to 300F (-29 to 149C)
LS200
Electrical: SPDT std. (see Electrical section for configuration/rating)
Wiring: 18 AWG x 36 in. (1.0 mm2 x 916 mm)
LS200NDVOR
DVO valve: 3-way N.C. w/manual operator, all connections 1/8” NPT (minimum 30 psig required)
Filter/pressure regulator set:
Regulator: 0 to 75 psig (0 to 517 kPa) [0 to 5.17 bar] range
Maximum input pressure: 300 psig (2.07 MPa) [20.7 bar]
LS200NDVO
DVO valve: 3-way N.C. w/manual operator; all connections 1/8” NPT
LS200 N
Vent valve: 2-way N.C. w/ 1/16in. (2mm) orifice and Viton seat; Inlet: 1/8” NPT; outlet 3/8” NPT
Approximate Shipping Weights and Dimensions
All models: 6 lb. 10 oz. (3 kg)
Dimensions: (w x h x d) 10.18 x 3.36 x .11 in. (259 x 85.34x 2.88 mm)
Replacement Parts
Order by part number designation.
LS200
15000479: Stainless steel float for LS200 (not interchangeable with L1200)
15000124: SPDT snap-switch assembly
15000478: 1-inch float shaft extension (not interchangeable with L1200)
LS200N
15000479: Stainless steel float for LS200N (not interchangeable with L1200)
15000501: Valve stem kit
Section 15 00-02-0671
2021-01-04 - 11 -
The FW Murphy Gas Compressor Scrubber Level System (SLS)
Section 15 00-02-0671
2021-01-04 - 12 -
2002PR
Section No. 5.3
Series
Features
• Multiple Orifice Sizes, 316 Stainless Steel Standard
• Easy Maintenance: The top entry design allows the trim to be
High Pressure
replaced with the body still in-line. Gas Regulator
Overpressure Protection D
As is true with most regulators, the WellMark “Mighty Gun” Series C
2002PR Regulator has an outlet pressure rating that is lower than
the inlet pressure rating. Overpressure protection is needed if there General Dimensions
Size A B C D E
is a chance that the outlet pressures could exceed the levels shown 1" 9 11 / 16 " 7 1/2" 4" 2 1 / 16 " 1"
in Table 2. 2" 9 11 / 16 " 8 5/8" 5" 2 1/2" 1 21 / 32 "
The Company • Oklahoma City, Oklahoma • Tel: (405) 672-6660 • Fax: (405) 672-6661 • wellmarkco.com
©2015 The WellMark Company • Litho USA • WM2002PR-03/15 • All registered trademarks are the property of their respective owners. 7
2002PR
Section No. 5.3
Series
The Company • Oklahoma City, Oklahoma • Tel: (405) 672-6660 • Fax: (405) 672-6661 • wellmarkco.com
8 ©2015 The WellMark Company • Litho USA • WM2002PR-03/15 • All registered trademarks are the property of their respective owners.
2002PR
Section No. 5.3
Series
The Company • Oklahoma City, Oklahoma • Tel: (405) 672-6660 • Fax: (405) 672-6661 • wellmarkco.com
©2015 The WellMark Company • Litho USA • WM2002PR-03/15 • All registered trademarks are the property of their respective owners. 9
2002PR
Section No. 5.3
Series
The Company • Oklahoma City, Oklahoma • Tel: (405) 672-6660 • Fax: (405) 672-6661 • wellmarkco.com
10 ©2015 The WellMark Company • Litho USA • WM2002PR-03/15 • All registered trademarks are the property of their respective owners.
2002PR
Section No. 5.3
Series
The Company • Oklahoma City, Oklahoma • Tel: (405) 672-6660 • Fax: (405) 672-6661 • wellmarkco.com
©2015 The WellMark Company • Litho USA • WM2002PR-03/15 • All registered trademarks are the property of their respective owners. 11
2002PR
Section No. 5.3
Series
The Company • Oklahoma City, Oklahoma • Tel: (405) 672-6660 • Fax: (405) 672-6661 • wellmarkco.com
12 ©2015 The WellMark Company • Litho USA • WM2002PR-03/15 • All registered trademarks are the property of their respective owners.
2002PR
Section No. 5.3
Series
The Company • Oklahoma City, Oklahoma • Tel: (405) 672-6660 • Fax: (405) 672-6661 • wellmarkco.com
©2015 The WellMark Company • Litho USA • WM2002PR-03/15 • All registered trademarks are the property of their respective owners. 13
2002PR
Section No. 5.3
Series
16 15 17 18 14 21 22 19 23 33 25 24 16 15 17 18 19 35 36 21 22 37 38 23 34 39 32 25 42 24
20 20
31
40
5 10 27 26 28 29 30 5
14 41 33 27 26 28 29 30
12 31
11 10
12
12
Standard 11 Self-Relieving
8 Regulator Regulator
12
7 8
4 9 13 2 1 6 4 9 13 2 1 6 7
The Company • Oklahoma City, Oklahoma • Tel: (405) 672-6660 • Fax: (405) 672-6661 • wellmarkco.com
14 ©2015 The WellMark Company • Litho USA • WM2002PR-03/15 • All registered trademarks are the property of their respective owners.
2002PR
Section No. 5.3
Series
The Company • Oklahoma City, Oklahoma • Tel: (405) 672-6660 • Fax: (405) 672-6661 • wellmarkco.com
©2015 The WellMark Company • Litho USA • WM2002PR-03/15 • All registered trademarks are the property of their respective owners. 15
YTA610/YTA710
Temperature Transmitter
- Total Insight -
Bulletin 01C50G00-01EN
YOKOGAWA supports the
Temperature Transmitter YTA610/YTA710 entire lifecycle of products.
Over many years Yokogawa has designed and built leading technology temperature
- From 'Sensing' to 'Sensemaking' -
transmitters and measurement devices. Building on this experience, Yokogawa has created a
new generation of temperature transmitters to provide accurate, reliable temperature
measurement. The YTA610/YTA710 temperature transmitters bring unique value to Through reliable sensing technology and
Expert Sensing
temperature measurement while meeting a range of user needs. data utilization, we will continue to provide
Solution Selection
new value throughout the customer's
lifecycle.
- Maintenance and - Engineering and The YTA110/310/320 series announced in
Service - Procurement - 1998 was globally adopted because of the
excellent value it provided for a wide range
of customer needs. Moving forward, the
YTA610/YTA710 series will give improved
value for an even more extensive range of
customer temperature measurement needs.
Rich Easy
The YTA610/YTA710 transmitters, like all
Information Installation
other Yokogawa field instruments, are
supported over the entire product lifecycle.
- Operation and - Configuration and
Observation - Commissioning -
YTA710
YTA50 YTA610
YTA70 YTA710
Head mount
Next generation Field mount
YTA610
2015
1 2
Sensing Selection
- Engineering and Procurement -
Worldwide Approvals
Multi Tier Lineup With the rapid globalization of markets, numerous international
standards and approvals are becoming necessary; therefore,
Yokogawa instruments have acquired various international
Yokogawa offers a two-tier lineup to fit the customer application needs. certifications including flameproof, functional safety (SIL: Safety
Integrity Level IEC61508), electromagnetic compatibility (EMC),
and communication protocols.
YTA710
Ultimate Transmitter
YTA710 is the premium solution offering unsurpassed
accuracy ( Pt100:±0.10°C/±0.18°F) and the ultimate
diagnostics for demanding applications.
YTA610
Essential Transmitter
YTA610 is the base solution offering accurate
Universal Inputs
temperature measurement (Pt100:±0.14°C/ ±0.25°F) and
essential diagnostics to keep the process running well.
In addition to measuring temperature with
various RTDs and thermocouples, the
YTA610/YTA710 can be used to convert DC
voltage and resistance into an analog 4 to 20
Engineered Robustness mA output. There is a wide range of devices
that can be used to supply a resistance or
voltage input.
Today’s temperature applications can be located in very harsh environments; Yokogawa’s temperature
transmitters are engineered to endure the tough conditions with a dual compartment housing design
made from either low copper aluminum or stainless steel. The dual compartment design isolates the
field wiring terminals from the electronics. Input
Output
Temperature sensor
Input
mV or Ω
Product Finder
3 4
Easy Installation
- Configuration and Commissioning -
Display
At a glance, the YTA610 /YTA710 indicator displays the current process measurement or status of the
transmitter in a large easy to read format. The sweeping bar graph provides a graphical representation of
the measurement, while the center line and bottom line of the display indicate the actual value and unit of
measure. When detecting a problem, the center line displays the alarm code while the bottom line shows a
short alarm code description.
Custom Thermocouple User Table
Temperature
display, without the need for a Hand Held Communicator (HHC) or additional configuration tools. 1 t1 V1
* Accessible parameters vary depending on the communication protocol ・ ・ ・
・ ・ ・
・ ・ ・
t1
n tn Vn
V1 Vn
EMF
5 6
Rich Information Sensor Diagnostics
- Operation and Observation -
Advanced diagnostics for the temperature sensor and its electrical cable is
implemented. The diagnosis information arrows to reduce the plant downtime
by providing predictive maintenance information and backup sensor
NAMUR NE107 preparation in advance.
All device alarms are classified into the four categories (“Failure”,
“Function Check”, “Out of Specification” and “Maintenance
Required”) defined by the NAMUR NE107 recommendations.
These alarms are displayed on the asset management system in Sensor Drift Diagnostics
the appropriate category, enabling the operator to recognize ー For YTA610/YTA710 -
the device status and take the necessary corrective action. The transmitter can be set up to monitor the measured difference
between the two sensors. A user-defined alarm will alert when
that difference reaches the programmed value.
Alarm on LCD
Sensor Value
Difference between
Sensor 1 and 2
Sensor Backup
Operating Time
The YTA610/YTA710 have the capability of having two
sensors supply input to the unit - one can serve as the
primary sensor and second as the secondary sensor.
The transmitter can be set up to automatically switch to
the secondary sensor if the primary sensor fails. When RTD Sensor Corrosion Diagnostics
this occurs, an alarm message is generated on the ー For YTA710 -
transmitter display and transmitted to the host system This diagnostic detects any corrosion at the terminals or along the
and asset manager. The failed sensor can be replaced connection wiring between the sensor and the transmitter
during the next maintenance period, avoiding monitoring sensor resistance. When the resistance reaches the
unscheduled plant shutdowns and any adverse impact user-defined value, the transmitter will alert that there is a wire
to plant control due to a faulty temperature sensor. break or bad electrical connection.
Alarm
Line resistance
Threshold
Operating time
Sensor value
the YTA610/ YTA710 that is used to
Collects data
analyze plant maintenance activities. Cyclic temperature change results in a gradual deterioration Lower limit
PRM centralizes asset management of the temperature sensor. Users can set threshold and
and provides intelligent plant-wide frequency limits to trigger an alarm status. This alarm can be 1 time 2 time 3 time Alarm
used by the user to estimate the remaining life of the sensor.
diagnostics.
Operating time
7 8
Expert Solution Device Lifecycle Management
- Maintenance and Service -
The newly developed Device Lifecycle Management service helps to
Service Log minimize the amount of manual work that must be performed and
improves the management of devices information. This service makes it
easy to register, view, and manage information on instruments that is
Alarms detected by the instrument are stored in internal memory useful for maintenance work, and helps customers to improve the
along with run time information. Troubleshooting can be efficiency of plant maintenance work and the quality of data management.
performed quickly by checking the log. Through solutions such as this Device Lifecycle Management service,
Yokogawa will provide its customers the support they need to ensure the
- Alarm log
optimal management of their plant assets.
- Max / Min temperature sensor value
- Max / Min ambient temperature value
- Operating time
View of the device information,
Instruction manual and
manufacturing record in the site.
Mobile application
Detachable Lightning
Protector (Option)
Upload
Data Transfer Using FieldMate parameters
9 10
Temperature
measuring
instrument
lineup
YTA710 YTA610 YTA510 YTMX580 YTA70 YTA70P DTSX
HART
Communication HART
FOUNDATION ISA100 ISA100 MODOBUS/
protocols Fieldbus FOUNDATION Wireless Wireless HART HART TCP
Fieldbus
BRAIN
Yes Yes No
Display With With Yes No No No (Separete installation
LPS function LPS function is possible)
Functional
safety SIL2 SIL2 No No No No No
(IEC61508)
Number of
inputs 1/2 1/2 2 8 1 1 2/4/16*
(Number of channels)
Flameproof Flameproof
Explosion Intrinsically safe Non-Incendive
proof Intrinsically safe Intrinsically safe Intrinsically safe Intrinsically safe Intrinsically safe
Non-Incendive Type n
Non-Incendive Non-Incendive
* The number of measurement points for each channel depends on the length of optical fiber sensor.
Trademarks
All brand or product names of Yokogawa Electric Corporation in this document are trademarks or registered trademarks of Yokogawa
Electric Corporation. All other company brand or product names in this bulletin are trademarks or registered trademarks of their
respective holders.
General YTA610
Specifi cations Temperature Transmitter
GS 01C50H01-01EN
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 01C50H01-01EN Apr. 21, 2020-00
<<Contents>> <<Index>> 3
Safety Requirement Standards ■ PHYSICAL SPECIFICATIONS
EN61010-1, C22.2 No.61010-1
• Installation category: I Enclosure
(Anticipated transient overvoltage 330 V) Material & coating
• Pollution degree: 2 • Low copper cast aluminum alloy
• Indoor/Outdoor use [for aluminum housing]
EN61010-2-030, C22.2 No.61010-2-030 Polyester powder coating
• Measurement category: O (Other) Mint-green paint (Munsell 5.6BG 3.3/2.9 or its
(Measurement Input voltage: 150mVdc max) equivalent)
EU RoHS Directive [for option code /P or /X2]
Applicable standard: EN 50581 Epoxy and polyurethane resin solvent coating
• ASTM CF-8M Stainless steel or its equivalent
■ NORMAL OPERATING CONDITION Degrees of protection
(Optional features or approval codes may affect limits.) IP66/IP67, TYPE 4X
Ambient Temperature Limits Name plate and tag
–40 to 85°C (–40 to 185°F) 316 SST
–30 to 80°C (–22 to 176°F) (with indicator model) Mounting
Ambient Humidity Limits Optional mounting brackets can be used either for
0 to 100% RH at 40°C (104°F) two-inch pipe or flat panel mounting.
Supply Voltage Requirements Terminal screws
M4 screws
HART type
10.5 to 42 V DC for general use and flameproof type Integral Indicator (with indicator model)
10.5 to 32 V DC for lightning protector (option code /A) 5-digit numerical display, 6-digit unit display and bar
10.5 to 30 V DC for intrinsically safe and non- graph.
incendive type Local Parameter Setting (with indicator model)
Minimum voltage limited at 16.6 V DC for digital Parameter configuration by the push button offers
communications HART easy and quick setup for parameters.
With 24 V DC supply, up to a 550Ω load can be used. Accessible parameters are different with each output
See graph below. signal cord.
Weight
Aluminum housing:
1.3 kg (2.9 lb) without integral indicator and mounting
600 Integral indicator: 0.2 kg (0.4 lb)
Bracket for horizontal pipe: 0.3 kg (0.7 lb)
E-10.5
R= Bracket for vertical pipe: 1.0 kg (2.2 lb)
External 0.0244 Digital
load Communication
Stainless housing:
resistance range 3.1 kg (6.8 lb) without integral indicator and mounting
HART Integral indicator: 0.3 kg (0.7 lb)
250 Connections
Refer to “MODEL AND SUFFIX CODE.”
R (Ω)
Fieldbus type
9 to 32V DC for general use, flameproof type, and
non-incendive type
9 to 30 V DC for intrinsically safe type
9 to 17.5 V DC for FISCO field device
Communication Requirements
Supply Voltage: 9 to 32 V DC
Current Draw:
Steady state: 15 mA (max)
Software download state: 24 mA (max)
Load Requirements (HART type)
0 to 1290Ω for operation
250 to 600Ω for digital communication
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 01C50H01-01EN July 21, 2020-00
<<Contents>> <<Index>> 4
Table 1. Sensor type, measurement range, and accuracy
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 01C50H01-01EN Jan. 15, 2018-00
<<Contents>> <<Index>> 5
Table 2. Temperature coefficient
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 01C50H01-01EN July 21, 2020-00
<<Contents>> <<Index>> 6
OPTIONAL SPECIFICATION
Item Description Code
Lightning protector *4 Allowable current: Max. 6000A(8×20µs), repeating 1000A(8×20µs), 100 times A
Painting*1*6 Color and coating change Color: Munsell code N1.5 Black
P1
Amplifier cover only*3 Coating: High anti-corrosion coating
Color: Munsell code 7.5BG4/1.5, Jade green
P2
Coating: High anti-corrosion coating
Color: Metallic silver
P7
Coating: High anti-corrosion coating
Color and coating change Color: Munsell code 7.5 R4/14, Red
PR
Amplifier and terminal Covers*3 Coating: High anti-corrosion coating
Coating change High anti-corrosion coating X2
Output signal low-side in Output signal Low-side: –5%, 3.2 mA DC or less.
C1
transmitter failure*2 Sensor burnout is also set to 'Low': –2.5%, 3.6 mA DC.
NAMUR NE43 compliant*2 Output signal limits: Failure alarm down-scale: output status at CPU failure and
3.8 mA to 20.5 mA hardware error is –5%, 3.2 mA or less. C2
Sensor burnout is also set to Low: –2.5%, 3.6 mA DC.
Failure alarm up-scale: output status at CPU failure and hardware
error is 110%, 21.6 mA or more. C3
In this case Sensor burnout is High: 110%, 21.6 mA DC.
Data configuration*2 Description into “Descriptor” parameter of HART protocol (max. 16 characters) CA
Wired tag plate SUS316 stainless steel tag plate wired onto transmitter N4
Sensor matching RTD sensor matching function CM1
Attached flameproof Electrical connection G1/2 female
2pc. V52
packing adapter*5*7 Applicable cable: O.D.8.0 to 12 mm
EAC approval and Russian EAC approval and Russian pattern approval marking
VR
pattern approval marking*8
EAC approval marking EAC approval marking without Russian pattern approval marking
without Russian pattern VE
approval marking*8
Manufacturing*9*10 Optional code to specify the manufacturing factory SG
Marine Certificate*11 DNV GL Type Approval
WCD
Certificate No.: TAA00002N5
EU RO Mutual Recognition Type Approval*12
WCE
Certificate No.: MRA000002G
Note: The indication of the nameplate shows an initial shipment state.
*1: Not applicable for Stainless housing.
*2: Not applicable for Fieldbus type.
*3: Except for Amplifier and terminal cover, color and coating are general specification.
*4: Lightning protector (surge absorber) can be remove from, or added to the equipment.
*5: Combination with other Explosion protected other than TIIS flameproof is not possible.
*6: The combination of X2 and P is not possible.
*7: Applicable for Electrical Connection code 4. (The thread of connection between YTA and CABLE GLAND is M20,
and the thread of connection between CABLE GLAND and CABLE is G1/2.)
*8: Combination with other Explosion protected other than EAC Explosion-proof type is not applicable.
*9: If SG is not attached, it is made in China. It includes English name plate and English IM.
*10: In principle when this code is specified, the product made in Singapore will be delivered.
*11: Applicable for only HART type.
*12: Not applicable for SG.
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 01C50H01-01EN Nov. 17, 2020-00
<<Contents>> <<Index>> 7
OPTIONAL SPECIFICATION (For Explosion Protected type)
Item Description Code
ATEX 4-20mA:
[Intrinsically safe ia approval]
Applicable Standard: EN 60079-0:2012+A11:2013, EN 60079-11:2012
Certificate No. FM16ATEX0019X
II 1 G Ex ia IIC T5…T4 Ga
II 2 (1) D Ex ia [ia Da] IIIC T135°C Db
Ambient Temperature: –40 to +70°C for T4, –40 to +50°C for T5, –30 to +70°C for IIIC
Enclosure: IP66/IP67
Electrical parameters:
Supply/Output circuit: Terminals: +, –
Ui=30V, Ii=200mA, Pi=1.0W, Ci=22nF, Li=0mH
Sensor circuit: Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A)
[Intrinsically safe ic]
Applicable Standard: EN 60079-0:2012+A11:2013, EN 60079-11:2012
Certificate: Not Applicable as per Annex VIII to ATEX 2014/34/EU
II 3 G Ex ic IIC T5...T4 Gc KU2
Ambient Temperature: –30 to +70°C for T4, –30 to +50°C for T5
Enclosure: IP66/IP67
Overvoltage category: I
Electrical parameters:
Supply/Output circuit: Terminals: +, –
Ui=30V, Ci=22nF, Li=0mH
Sensor circuit: Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A)
[Flameproof and Dust Ignition Proof Approval]
Applicable Standard: EN 60079-0:2012+A11:2013, EN 60079-1:2014, EN 60079-31:2014
Certificate: KEMA 07ATEX0130
II 2 G Ex db IIC T6/T5 Gb, II 2 D Ex tb IIIC T70°C/T90°C Db
Ambient Temperature for Gas Atmospheres: –40 to 75°C for T6, –40 to 80°C for T5
Ambient Temperature for Dust Atmospheres: –30 to 65°C for T70°C, –30 to 80°C for T90°C
Enclosure: IP66/IP67
Electrical Connection: 1/2 NPT female and M20 female*1
Fieldbus:
[Intrinsically safe ia approval]
Applicable Standard: EN 60079-0:2012+A11:2013, EN 60079-11:2012
Certificate No. FM16ATEX0019X
II 2 (1) D Ex ia [ia Da] IIIC T135°C Db
II 1 G Ex ia IIC T4 Ga
Ambient Temperature: –55 to +60°C for T4, -30 to +60 for IIIC
Enclosure: IP66/IP67
Electrical parameters:
Supply/Output circuit: Terminals: +, –
FISCO field device or
Ui=30V, Ii=300mA, Pi=1.2W, Ci=2.2nF, Li=0mH
Sensor circuit: Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A)
[Intrinsically safe ic] KU25
Applicable Standard: EN 60079-0:2012+A11:2013, EN 60079-11:2012
Certificate: Not Applicable as per Annex VIII to ATEX 2014/34/EU
II 3 G Ex ic IIC T4 Gc
Ambient Temperature: –30 to +70°C
Enclosure: IP66/IP67
Overvoltage category: I
Electrical parameters:
Supply/Output circuit: Terminals: +, –
FISCO field device or
Ui=32V, Ci=2.2nF, Li=0mH
Sensor circuit: Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A)
[Flameproof and Dust Ignition Proof Approval]
Same as KU2
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 01C50H01-01EN Apr. 21, 2020-00
<<Contents>> <<Index>> 8
Item Description Code
IECEx 4-20mA:
[Intrinsically safe ia, ic pproval]
Applicable Standard: IEC 60079-0: 2017, IEC 60079-11: 2011
Certificate No. IECEx FMG 16.0014X
Ex ia IIC T5…T4 Ga
Ex ic IIC T5...T4 Gc
Ex ia [ia Da] IIIC T135°C Db
Ambient Temperature:
–40 to +70°C for T4 (Ex ia), –40 to +50°C for T5 (Ex ia), –30 to +70°C for IIIC (Ex ia),
–30 to +70°C for T4 (Ex ic), –30 to +50°C for T5 (Ex ic)
Enclosure: IP66/IP67
Over voltage category: I
Electrical parameters (Ex ia)
Supply/Output circuit: Terminal: +, –
Ui=30V, Ii=200mA, Pi=1.0W, Ci=22nF, Li=0mH
Sensor circuit: Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH SU2
Electrical parameters (Ex ic)
Supply/Output circuit: Terminal: +, –
Ui=30V, Ci=22nF, Li=0mH
Sensor circuit: Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A)
[Flameproof and Dust Ignition Proof Approval]
Applicable standard: IEC 60079-0:2011 IEC 60079-1:2014-06, IEC 60079-31:2013
Certificate: IECEx KEM 07.0044
Ex db IIC T6/T5 Gb, Ex tb IIIC T70°C/T90°C Db
Ambient Temperature for Gas Atmospheres: –40 to 75°C (–40 to 167°F) for T6,
–40 to 80°C (–40 to 176°F) for T5
Ambient Temperature for Dust Atmospheres: –30 to 65°C (–22 to 149°F) for T70°C,
–30 to 80°C (–22 to 176°F) for T90°C
Enclosure: IP66/IP67
Electrical Connection: 1/2 NPT female and M20 female*1
Fieldbus:
[Intrinsically safe ia approval]
Applicable Standard: IEC 60079-0: 2017, IEC 60079-11: 2011
Certificate No. IECEx FMG 16.0014X
Ex ia IIC T4 Ga
Ex ic IIC T4 Gc
Ex ia [ia Da] IIIC T135°C Db
Ambient Temperature: –55 to +60°C for T4 (Ex ia)
Ambient Temperature: –30 to +60°C for IIIC (Ex ia)
–30 to +70°C (Ex ic)
Enclosure: IP66/IP67
Overvoltage category: I
Electrical parameters (Ex ia)
Supply/Output circuit: Terminals: +, – SU25
FISCO field device or
Ui=30V, Ii=300mA, Pi=1.2W, Ci=2.2nF, Li=0mH
Sensor circuit: Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Electrical parameters (Ex ic)
Supply/Output circuit: Terminals: +, –
FISCO field device or
Ui=32V, Ci=2.2nF, Li=0mH
Sensor circuit:Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A)
[Flameproof and Dust Ignition Proof Approval]
Same as SU2
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 01C50H01-01EN Apr. 21, 2020-00
<<Contents>> <<Index>> 9
Item Description Code
FM (US) 4-20mA:
[Intrinsically safe approval/non-incendive approval]
Applicable standard: FM Class 3600:2011, FM Class 3610:2015, FM Class 3611:2004,
FM Class 3810:2018, ANSI/ISA-60079-0:2013, ANSI/ISA-60079-11:2014
ANSI/IEC 60529:2004, ANSI/UL 61010-1:2012, ANSI/UL 61010-2-30:2012, NEMA 250:2003
Intrinsically safe for
Class I, II, III Division 1, Groups A, B, C, D, E, F, G, T5…T4
Class I Zone 0 AEx ia IIC T5…T4
Non-incendive for
Class I, II, Division 2, Groups A, B, C, D, F, G, T5…T4
Class III, Division 1 T5…T4
Class I Zone 2 Group IIC T5…T4
Ambient Temperature: –40 to 70°C for T4, –40 to 50°C for T5
Enclosure Type 4X, IP66/IP67
Electrical parameters:
Intrinsically safe for
Supply/Output circuit: Terminals: +, –
Ui=30V, Ii=200mA, Pi=1.0W, Ci=22nF, Li=0mH
FU1
Sensor circuit: Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Non-incendive for
Supply/Output circuit: Terminals: +, –
Ui=30V, Ci=22nF, Li=0mH
Sensor circuit:Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A)
[Explosionproof approval]
Applicable standard: FM Class 3600:2018, FM Class 3615:2018, FM Class 3810: 2005,
NEMA250: 2014
Class I, Division 1, Groups A, B, C and D.;
Class II/III, Division 1, Groups E, F and G.
"FACTORY SEALD, CONDUIT SEAL NOT REQUIRED."
Enclosure Ratings: TYPE 4X
Temperature Class: T6
Ambient Temperature: –40 to 60°C (–40 to 140°F)
Electrical Connection: 1/2NPT female*2
Fieldbus:
[Intrinsically safe approval/non-incendive approval]
Applicable standard: FM Class 3600:2011, FM Class 3610:2015, FM Class 3611:2004,
FM Class 3810:2018, ANSI/ISA-60079-0:2013, ANSI/ISA-60079-11:2014
ANSI/IEC 60529:2004, ANSI/UL 61010-1:2012, ANSI/UL 61010-2-30:2012, NEMA 250:2003
Intrinsically safe for
Class I, II, III Division 1, Groups A, B, C, D, E, F, G T4
Class I Zone 0 AEx ia IIC T4
Non-incendive for
Class I, II, Division 2, Groups A, B, C, D, F, G T4
Class III, Division 1 T4 Class I Zone 2 Group IIC T4
Ambient Temperature: –55 to 60°C
Enclosure Type 4X, IP66/IP67
Electrical parameters:
FU15
Intrinsically safe for
Supply/Output circuit: Terminals: +, –
FISCO field device or
Ui=30V, Ii=300mA, Pi=1.2W, Ci=2.2nF, Li=0mH
Sensor circuit: Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Non-incendive for
Supply/Output circuit: Terminals: +, –
Ui=32V, Ci=2.2nF, Li=0mH
Sensor circuit: Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A)
[Explosionproof approval]
Same as FU1
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 01C50H01-01EN Apr. 21, 2020-00
<<Contents>> <<Index>> 10
Item Description Code
CSA*3 4-20mA:
[Intrinsically safe approval/non-incendive approval]
FM (Canada)*4 Applicable standard: CAN/CSA-C22.2 No. 94.2-07, C22.2 No.213:1987,
CAN /CSA-C22.2 No. 60079-0:11, CAN/CSA-C22.2 No. 60079-11:14,
CAN/CSA-C22.2 No. 60529:05, CAN/CSA-C22.2 No. 61010-1-12,
CAN/CSA-C22.2 No. 61010-2-030-12
Intrinsically safe for
Class I, II, III, Division 1, Groups A, B, C, D, E, F, G, T5…T4
Ex ia IIC T5…T4 Ga
Non-incendive for
Class I, II, Division 2, Groups A, B, C, D, F, G T5…T4
Class III Division 1 T5…T4
Ambient Temperature: –40 to 70°C for T4, –40 to 50°C for T5
Enclosure Type: 4X, IP66/IP67
Electrical parameters:
Intrinsically safe for
Supply/Output circuit: Terminals: +, –
Ui=30V, Ii=200mA, Pi=1.0W, Ci=22nF, Li=0mH
Sensor circuit: Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH CU1
Non-incendive for
Supply/Output circuit: Terminals: +, –
Ui=30V, Ci=22nF, Li=0mH
Sensor circuit: Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A)
[Explosionproof approval]
Applicable standard: C22.2 No. 25-17, C22.2 No. 30-M1986, C22.2 No. 94.2-15,
C22.2 No. 142-M1987, C22.2 No. 157-92, C22.2 No. 213-17, C22.2 No.61010-1-12,
C22.2 No. 61010-2-030-12
Class I, Groups B, C and D,
Class II, Groups E, F and G,
Class III.
For Class I, Division2 Groups ABCD Locations “FACTORY SEALED, CONDUIT SEAL NOT
REQUIRED”
Enclosure TYPE 4X
Temperature Class: T6
Ambient Temperature: –40 to 60°C
Electrical Connection: 1/2 NPT female*2
Fieldbus:
[Intrinsically safe approval/non-incendive approval]
Applicable standard: CAN/CSA-C22.2 No. 94.2-07, C22.2 No.213:1987,
CAN /CSA-C22.2 No. 60079-0:11, CAN/CSA-C22.2 No. 60079-11:14,
CAN/CSA-C22.2 No. 60529:05, CAN/CSA-C22.2 No. 61010-1-12,
CAN/CSA-C22.2 No. 61010-2-030-12
Intrinsically safe for
Class I, II, III, Division 1, Groups A, B, C, D, E, F, G T4
Ex ia IIC T4 Ga
Non-incendive for
Class I, II, Division 2, Groups A, B, C, D, F, G T4
Class III Division 1 T4
Ambient Temperature : –55 to 60°C
Enclosure Type: 4X, IP66/IP67
Electrical parameters: CU15
Intrinsically safe for
Supply/Output circuit: Terminals: +, –
FISCO field device or
Ui=30V, Ii=300mA, Pi=1.2W, Ci=2.2nF, Li=0mH
Sensor circuit: Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Non-incendive for
Supply/Output circuit: Terminals: +, –
Ui=32V, Ci=2.2nF, Li=0mH
Sensor circuit: Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A)
[Explosionproof approval]
Same as CU1
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 01C50H01-01EN Apr. 21, 2020-00
<<Contents>> <<Index>> 11
Item Description Code
NEPSI*6 4-20mA and Fieldbus:
[Flameproof and Dust Ignition Proof Approval]
Applicable Standard: GB3836.1-2010, GB3836.2-2010, GB12476.1-2013, GB12476.5-2013
Certificate No. GYJ16.1396X
Ex d IIC T6/T5 Gb, Ex tD A21 IP66/IP67 T70°C/T90°C NF2
Ambient Temperature for Gas Atmospheres: –40 to 75°C for T6, –40 to 80°C for T5
Ambient Temperature for Dust Atmospheres: –30 to 65°C for T70°C, –30 to 80°C for T90°C
Enclosure: IP66/IP67
Electrical Connection: 1/2 NPT female and M20 female*1
4-20mA:
[Intrinsically safe approval ]
Applicable Standard: GB3836.1-2010, GB3836.4-2010, GB3836.20-2010, GB3836.19-2010,
GB12476.1-2013, GB12476.4-2010
Certificate No.: GYJ16.1423X
Ex ia IIC T4/T5 Ga
Ex ic IIC T4/T5 Gc
Ex iaD [iaD 20] 21 IP6X T135°C
Ambient Temperature:
–40 to 70°C for T4, –40 to 50°C for T5(Ex ia)
–30 to 70°C(Ex iaD)
–30 to 70°C for T4, –30 to 50°C for T5(Ex ic)
Enclosure: IP66/IP67 NS2
Overvoltage category: I
Electrical parameters (Ex ia):
Supply/Output circuit: Terminals: +, -
Ui = 30 V, Ii = 200 mA, Pi = 1.0 W, Ci = 22 nF, Li = 0 mH
Sensor circuit: Terminals: 1, 2, 3, 4, 5
Uo = 6 V, Io = 90 mA, Po = 135 mW, Co = 10 μF, Lo = 3.9 mH
Electrial parameters (Ex ic):
Supply/Output circuit: Terminals: +, -
Ui = 30 V, Ci = 22 nF, Li = 0 mH
Sensor circuit: Terminals: 1, 2, 3, 4, 5
Uo = 6 V, Io = 90 mA, Po = 135 mW, Co = 10 μF, Lo = 3.9 mH
Dielectric strength: 500 V a.c.r.m.s., 1 min (Without /A)
Fieldbus:
[Intrinsically safe approval]
Applicable Standard: GB3836.1-2010, GB3836.4-2010, GB3836.20-2010, GB3836.19-2010,
GB12476.1-2013, GB12476.4-2010
Certificate No.: GYJ16.1423X
Ex ia IIC T4 Ga
Ex ic IIC T4 Gc
Ex iaD [iaD 20] 21 IP6X T135°C
Ambient Temperature:
–55 to 60°C for T4(Ex ia)
–30 to 60°C(Ex iaD)
–30 to 70°C for T4(Ex ic)
Enclosure: IP66/IP67 NS25
Overvoltage category: I
Electrical parameters (Ex ia):
Supply/output circuit: Terminals: +, -
FISCO field device or Ui = 30 V, Ii = 300 mA, Pi = 1.2 W, Ci = 2.2 nF, Li = 0 mH
Sensor input circuit: Terminals: 1, 2, 3, 4, 5
Uo = 6 V, Io = 90 mA, Po = 135 mW, Co = 10 μF, Lo = 3.9 mH
Electrial parameters (Ex ic):
Supply/Output circuit: Terminals: +, -
FISCO field device or Ui = 32 V, Ci = 2.2 nF, Li = 0 mH,
Sensor circuit: Terminals: 1, 2, 3, 4, 5
Uo = 6 V, Io = 90 mA, Po = 135 mW, Co = 10 μF, Lo = 3.9 mH
Dielectric strength: 500 V a.c.r.m.s., 1 min (Without /A)
INMETRO [4-20mA & Fieldbus: Flameproof and dust ignition proof approval]
Applicable Standard: ABNT NBR IEC 60079-0:2013 Versão Corrigida 2: 2016,
ABNT NBR IEC60079-1:2016, ABNT NBR IEC 60079-31:2014
Certificate: DEKRA 16.0009
Ex db IIC T6/T5 Gb, Ex tb IIIC T70°C/ 90°C Db UF1
Ambient Temperature for Gas: –40 to +75°C for T6, –40 to +80°C for T5
Ambient Temperature for Dust: –30 to +65°C for T70°C, –30 to +80°C for T90°C
Enclosure: IP66/IP67
Electrical Connection: 1/2 NPT female and M20 female*1
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 01C50H01-01EN Nov. 17, 2020-00
<<Contents>> <<Index>> 12
Item Description Code
INMETRO 4-20mA:
[Intrinsically safe approval "ia" ]
Applicable Standard: ABNT NBR IEC 60079-0:2013 Versão Corrigida 2:2016,
ABNT NBR IEC 60079-11:2013 Versão Corrigida :2017
Certificate: ABNT 17.0001X
Ex ia IIC T5...T4 Ga
Ex ia [ia Da] IIIC T135°C Db
Ambient Temperature: –55 to +70°C for T4, –55 to +50°C for T5
–30 to +70°C for IIIC
Enclosure: IP66/IP67
Electrical parameters:
Supply/Output circuit:
Terminals: +, −
Ui=30V, Ii=200mA, Pi=1.0W, Ci=22nF, Li=0mH
Sensor circuit:
Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
US1
Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A)
[Intrinsically safe approval "ic" ]
Applicable Standard: ABNT NBR IEC 60079-0:2013 Versão Corrigida 2:2016,
ABNT NBR IEC 60079-11:2013 Versão Corrigida :2017
Certificate: ABNT 17.0001X
Ex ic IIC T5…T4 Dc
Ambient Temperature: –30 to +70°C for T4, –30 to +50°C for T5
Enclosure: IP66/IP67
Overvoltage category: I
Electrical parameters:
Supply/Output circuit:
Terminals: +, −
Ui=30V, Ci=22nF, Li=0mH
Sensor circuit:
Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A)
Fieldbus:
[Intrinsically safe approval "ia" ]
Applicable Standard: ABNT NBR IEC 60079-0:2013 Versão Corrigida 2:2016,
ABNT NBR IEC 60079-11:2013 Versão Corrigida :2017
Certificate: ABNT 17.0001X
Ex ia IIC T4 Ga
Ex ia [ia Da] IIIC T135°C Db
Ambient Temperature:
–55 to +60°C for T4
–30 to +60°C for IIIC
Enclosure: IP66/IP67
Electrical parameters:
Supply/Output circuit:
Terminals: +, −
FISCO field device or
Ui=30V, Ii=300mA, Pi=1.2W, Ci=2.2nF, Li=0mH
Sensor circuit:
Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH US15
Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A)
[Intrinsically safe approval "ic" ]
Applicable Standard: ABNT NBR IEC 60079-0:2013 Versão Corrigida 2:2016,
ABNT NBR IEC 60079-11:2013 Versão Corrigida :2017
Certificate: ABNT 17.0001X
Ex ic IIC T4 Gc
Ambient Temperature: –30 to +70°C
Enclosure: IP66/IP67
Overvoltage category: I
Electrical parameters:
Supply/Output circuit:
Terminals: +, −
FISCO field device or
Ui=32V, Ci=2.2nF, Li=0mH
Sensor circuit:
Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A)
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 01C50H01-01EN Nov. 17, 2020-00
<<Contents>> <<Index>> 13
Item Description Code
KOSHA*6 [4-20mA & Fieldbus: Flameproof and dust ignition proof approval]
(With /SG)
Applicable Standard: Notice of Ministry of Labor No. 2019-15, harmorized with
IEC 60079-0:2011, IEC 60079-1:2014, IEC 60079-31:2013
Certificate: 17-AV4BO-0457 (Flameproof)
17-AV4BO-0458 (Dust Ignition Proof)
(Without /SG)
Applicable Standard: Notice of Ministry of Labor No. 2020-33, harmorized with
PF2
IEC 60079-0:2011, IEC 60079-1:2014, IEC 60079-31:2013
Certificate: 20-AV4BO-0088 (Flameproof),
20-AV4BO-0095 (Dust Ignition Proof)
Ex d IIC T6/ T5, Ex tD A21 IP66/IP67 T70°C/ T90°C
Ambient Temperature for Gas Atmospheres: –40 to 75°C for T6, –40 to 80°C for T5
Ambient Temperature for Dust Atmospheres: –30 to 65°C for T70°C, –30 to 80°C for T90°C
Enclosure: IP66/IP67
Electrical Connection: 1/2 NPT female and M20 female*1
4-20mA:
[Intrinsically safe approval]
(With /SG)
Applicable Standard: Notice of Ministry of Labor No. 2019-15, harmorized with
IEC 60079-0: 2017, IEC 60079-11: 2011
Certificate: 17-AV4BO-0459X
(Without /SG)
Applicable Standard: Notice of Ministry of Labor No. 2020-33, harmorized with
IEC 60079-0: 2017, IEC 60079-11: 2011
Certificate: 20-AV4BO-0094X
PS2
Ex ia IIC T5…T4
Ambient Temperature: –55 to 70°C for T4, –55 to 50°C for T5
Enclosure: IP66/IP67
Supply/Output circuit:
Terminals: +, -
Ui=30V, Ii=200mA, Pi=1.0W, Ci=22nF, Li=0mH
Sensor circuit:
Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A)
Fieldbus:
[Intrinsically safe approval]
(With /SG)
Applicable Standard: Notice of Ministry of Labor No. 2019-15, harmorized with
IEC 60079-0: 2017, IEC 60079-11: 2011
Certificate: 17-AV4BO-0459X
(Without /SG)
Applicable Standard: Notice of Ministry of Labor No. 2020-33, harmorized with
IEC 60079-0: 2017, IEC 60079-11: 2011
Certificate: 20-AV4BO-0094X
PS25
Ex ia IIC T4
Ambient Temperature: –55 to +60°C
Enclosure: IP66/IP67
Supply/Output circuit:
Terminals: +, –
FISCO field device and
Ui=30V, Ii=300mA, Pi=1.2W, Ci=2.2nF, Li=0mH
Sensor circuit:
Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A)
EAC*6 [4-20mA & Fieldbus: Flameproof and dust ignition proof approval]
Applicable Standard: ГОСТ 31610.0-2014
ГОСТ IEC 60079-1-2013
ГОСТ IEC 60079-31-2013
Certificate: For Flameproof ЕАЭС RU C-JP.AA87.B.00549/20
For Dust ignition proof ЕАЭС RU C-JP.AA87.B.00342/20 GF1*5
1Ex db IIC T6…T5 Gb X, Ex tb IIIC T70 °C…T90°C Db
Ambient Temperature for Gas Atmospheres: –60 to 75°C for T6, –60 to 80°C for T5
Ambient Temperature for Dust Atmospheres: –30 to 65°C for T70°C, –30 to 80°C for T90°C
Enclosure: IP66/IP67
Electrical Connection: 1/2 NPT female and M20 female*1
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 01C50H01-01EN Feb. 12, 2021-00
<<Contents>> <<Index>> 14
Item Description Code
EAC*6 4-20mA:
[Intrinsically safe approval "ia"]
Applicable Standard: ГОСТ 31610.0-2014
ГОСТ 31610.11-2014
Certificate: ЕАЭС RU C-JP.AA87.B.00342/20
0Ex ia IIC T5…4 Ga X
Ex ia [ia Da] IIIC T135 °C Db X
Ambient Temperature: –55 to +70°C for T4, –55 to +50 °C for T5, –30 to +70°C for IIIC
Enclosure: IP66/IP67
Supply/Output circuit:
Terminals: +, –
Ui=30V, Ii=200mA, Pi=1.0W, Ci=22nF, Li=0mH
Sensor circuit:
Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A) GS1*5
[Intrinsically safe approval "ic"]
Applicable Standard: ГОСТ 31610.0-2014
ГОСТ 31610.11-2014
Certificate: ЕАЭС RU C-JP.AA87.B.00342/20
2Ex ic IIC T5...T4 Gc X
Ambient Temperature: –30 to +70 °C for T4, –30 to +50 °C for T5
Enclosure: IP66/IP67
Overvoltage category: I
Supply/Output circuit:
Terminals: +, –
Ui=30V, Ci=22nF, Li=0mH
Sensor circuit:
Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A)
Fieldbus:
[Intrinsically safe approval "ia"]
Applicable Standard: ГОСТ 31610.0-2014
ГОСТ 31610.11-2014
Certificate: ЕАЭС RU C-JP.AA87.B.00342/20
0Ex ia IIC T4 Ga X
Ex ia [ia Da] IIIC T135 °C Db X
Ambient Temperature: –55 to +60°C for T4
–30 to +60°C for IIIC
Enclosure: IP66/IP67
Supply/Output circuit:
Terminals: +, –
FISCO field device and
Ui=30V, Ii=300mA, Pi=1.2W, Ci=2.2nF, Li=0mH
Sensor circuit:
Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
GS15*5
Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A)
[Intrinsically safe approval "ic" ]
Applicable Standard: ГОСТ 31610.0-2014
ГОСТ 31610.11-2014
Certificate: ЕАЭС RU C-JP.AA87.B.00342/20
2Ex ic IIC T4 Gc X
Ambient Temperature: –30 to +70 °C
Enclosure: IP66/IP67
Overvoltage category: I
Supply/Output circuit:
Terminals: +, –
FISCO field device and
Ui=32V, Ci=2.2nF, Li=0mH
Sensor circuit:
Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A)
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 01C50H01-01EN July 21, 2020-00
<<Contents>> <<Index>> 15
Item Description Code
EAC*6 4-20mA:
[Intrinsically safe approval]
Same as GS1
GU1*5
Electrical Connection: 1/2 NPT female and M20 female*1
[Flameproof and dust ignition proof approval]
Same as GF1
Fieldbus:
[Intrinsically safe approval]
Same as GS15
GU15*5
Electrical Connection: 1/2 NPT female and M20 female*1
[Flameproof and dust ignition proof Approval]
Same as GF1
*1: Applicable for Electrical Connection Code 2 and 4.
*2: Applicable for Electrical Connection Code 2.
*3: For Explosionproof approval.
*4: For Intrinsically safe approval/non-incendive approval.
*5: GF1, /GS1, /GS15, /GU1 and /GU15 shall be combined with either /VE or /VR.
*6: Not applicable for Marine Certificate.
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 01C50H01-01EN July 21, 2020-00
<<Contents>> <<Index>> 16
DIMENSIONS
Unit: mm (Approx. inch)
2-inch horizontal pipe mounting
111(4.37) 65.4(2.57) 66.1(2.60)
Electrical Connection
Electrical Connection 47.1 18.5
(Input signal) Terminal Cover
(Output signal) (1.85) (0.73)
With Indicator
(Optional)
ø93(3.66)
102(4.02)
164(6.46)
(1.57)
(For Explosionproof type)
40
Tag Plate
Horizontal Pipe
(0.98)
25
Mounting Bracket
(Optional)
ø93(3.66)
Shrouding Bolt
(For Explosionproof type)
209.5(8.25)
191.5(7.54)
Ground Terminal
Tag Plate
Vertical Pipe
Mounting Bracket
(1.81)
(Optional)
46
2-inch pipe
64(2.52)
ø60.5(ø2.38) 101(3.98)
70(2.76)
98(3.86)
F02E.ai
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 01C50H01-01EN Jan. 15, 2018-00
<<Contents>> <<Index>> 17
Terminals
Terminal Configuration
Input Wiring
Thermocouple and RTD and resistance Thermocouple and RTD and resistance
DC voltage (2-wire) DC voltage (3-wire)
(A) (A) (A1)
1 1 1 (+) 1
(B) (A) (B1)
2 2 2 (–) 2
(B) (B)
3 3 3 (B2) 3
(B) (B2)
4 4 4 (B2) 4
(A2)
5 5 5 (A2) 5
RTD and resistance RTD and resistance Thermocouple + RTD and resistance
(3-wire) (4-wire) RTD and resistance (2-wire)
(3-wire)
(A1)
1 (B1)
2 (B1)
3 (–)
4
5 (+)
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 01C50H01-01EN Jan. 15, 2018-00
<<Contents>> <<Index>> 18
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 01C50H01-01EN Apr. 21, 2020-00
<<Contents>> <<Index>> 19
<Factory Setting>
Table 3-1. Sensor setting of 4-20 mA type (HART type) Table 5. Usable characters
Sensor1 setting SP ! " # $ % & ' ( ) * + , - . /
Order Specified Setting 0 1 2 3 4 5 6 7 8 9 : ; < = > ?
Sensor Sensor @ A B C D E F G H I J K L M N O
Pattern Range Unit Range Unit P Q R S T U V W X Y Z [ \ ] ^ _
type type
1 Specified Specified Specified ` a b c d e f g h i j k l m n o
2 PT100 3 wire 0-100 °C p q r s t u v w x y z { | } ~
Sensor2 setting
Order Specified Setting
Sensor Sensor
Pattern Range Unit Range Unit
type type
1 Specified Specified Specified
2 Non Connection ― ―
: Specified, Blank: Not specified, -: Initial setting
Table 3-2. Other setting of 4-20 mA type (HART type)
Sensor burnout *1 HIGH: 21.6 mA DC (110%)
Output in Transmitter HIGH: 21.6 mA DC (110%) or more
failure
Sensor backup ‘DISABLE’ or as specified
TAG No. “Blank” or as specified in order
*1: Except when Optional code C1 or C2 is specified.
Sensor2 setting
Order Specified Setting
XD OUT XD OUT
Sensor XD OUT Sensor XD OUT
Pattern SCALE L TYPE SCLE SCALE L TYPE SCALE
type SCALE SCALE type SCALE SCALE
UNIT UNIT UNIT UNIT
1 Specified Specified Specified Specified Specified Specified
2 Specified Specified Specified DIRECT 0-100 %
Non
3 ― ― ― ― ―
Connection
: Specified, Blank: Not specified, -: Initial setting
Table 4-2. Other setting of Fieldbus type
Node Address (in hexadecimal) ‘0xF3’ unless otherwise specified in order
Operation functional Class ‘BASIC’, or as specified in order
Sensor backup *1 ‘DISABLE’ or as specified in order
TAG No. (Tag plate) “Blank” or as specified in order
Software Tag (PD_TAG) ‘TT1001’ unless otherwise specified in order.
*1: Channel settings of AI function blocks depend on sensor backup setting.
・ Unavailable
AI1 = Sensor1
AI2 = If Sensor2 type is specified, then Sensor2 else Terminal temperature
・ Available
AI1 = Backup temperature
AI2 = Terminal temperature
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 01C50H01-01EN Apr. 21, 2020-00
<<Contents>> <<Index>> 20
<Information on EU WEEE Directive>
EU WEEE (Waste Electrical and Electronic Equipment)
Directive is only valid in the EU.
This instrument is intended to be sold and used only
as a part of equipment which is excluded from WEEE
Directive, such as large-scale stationary industrial
tools, a large-scale fixed installation and so on, and,
therefore, subjected to the exclusion from the scope
of the WEEE Directive. The instrument should be
disposed of in accordance with local and national
legislation/regulations.
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 01C50H01-01EN Apr. 21, 2020-00
Subject to change without notice.
User’s
Manual YTA610 and YTA710
Temperature Transmitters
(Hardware)
IM 01C50G01-01EN
IM 01C50G01-01EN
6th Edition
Toc-1
CONTENTS
1. Preface........................................................................................................ 1-1
■ Notes on the User’s Manual............................................................................. 1-2
■ Notes on Safety and Modifications................................................................... 1-2
■ For Safe Use of Product................................................................................... 1-2
■ Warranty............................................................................................................ 1-3
■ Trademarks....................................................................................................... 1-3
■ Control of Pollution Caused by the Product...................................................... 1-4
2. Notes on Handling..................................................................................... 2-1
2.1 Nameplate........................................................................................................... 2-1
2.2 Transport............................................................................................................. 2-1
2.3 Storage................................................................................................................ 2-1
2.4 Choosing the Installation Location.................................................................. 2-2
2.5 Use of a Transceiver.......................................................................................... 2-2
2.6 Insulation Resistance Test and Withstand Voltage Test............................... 2-2
2.6.1 Insulation resistance test procedure................................................... 2-2
2.6.2 Withstand voltage test procedure....................................................... 2-3
2.7 Installation of Explosion Protected Type Transmitters................................. 2-4
2.7.1 ATEX Certification............................................................................... 2-4
2.7.2 IECEx Certification.............................................................................. 2-9
2.7.3 FM Certification................................................................................. 2-13
2.7.4 CSA Certification............................................................................... 2-15
2.7.5 Control Drawing................................................................................ 2-17
2.8 EMC Conformity Standards............................................................................ 2-34
2.9 Safety Requirement Standards ..................................................................... 2-34
2.10 EU RoHS Directive .......................................................................................... 2-34
3. Part Names and Functions....................................................................... 3-1
3.1 Part Names......................................................................................................... 3-1
3.2 Hardware Error Burnout and Hardware Write Protect Switch (HART/BRAIN)
.............................................................................................................................. 3-1
3.3 Integral Indicator Display Function................................................................. 3-2
3.4 Local Parameter Setting.................................................................................... 3-3
3.4.1 Local Parameter Setting (LPS) Overview........................................... 3-3
3.4.2 Parameters Configuration................................................................... 3-6
IM 01C50G01-01EN
<1. Preface> 1-1
1. Preface
The YTA temperature transmitter is fully factory-
tested according to the specifications indicated on WARNING
the order.
In order for the YTA temperature transmitter to When using the transmitter in a Safety
be fully functional and to operate in an efficient Instrumented System (SIS) application, refer to
manner, the manual must be carefully read to Appendix 1 in either IM 01C50T01-02EN for the
become familiar with the functions, operation, and HART protocol.
handling of the YTA. The instructions and procedures in this section
This manual gives instructions on handling, must be strictly followed in order to maintain the
wiring, installation, maintenance, and general transmitter for this safety level.
specifications.
To ensure correct use, please read this manual and These manuals can be downloaded from the
following user’s manuals. website of Yokogawa or purchased from the
Yokogawa representatives.
Document No. Explanation Website address: http://www.yokogawa.com/fld/
IM 01C50G01-01EN Hardware (This manual)
*1: It is a manual when there is /NS2, /NS25 and /NF2 in the
IM 01C50G01-02EN*1 For NEPSI Certification (Option additional specifications.
code: /NS2, /NS25 and /NF2 *2: It is a manual when there is /UF1, /US1 and /US15 in the
IM 01C50G01-01P *2 For Transmissor de additional specifications. This IM 01C50G01-01P is only in
Temperaturas YTA610 e Portuguese.
YTA710 (Hardware) (Option *3: It is a manual when there is /PF2, /PS2 and /PS25 in the
code: /UF1, /US1 and /US15) additional specifications. This IM 01C50G01-01K is only in
Korean.
IM 01C50G01-01K *3 YTA610 and YTA710
Temperature Transmitters
(Hardware) (Option code: /PF2,
/PS2 and /PS25)
IM 01C50T01-02EN For HART protocol type
IM 01C50T02-02EN For FOUNDATION Fieldbus
communication type
IM 01C50T03-02EN For BRAIN protocol type
GS 01C50G01-01EN YTA710 Temperature
Transmitter
GS 01C50H01-01EN YTA610 Temperature
Transmitter
IM 01C50G01-01EN
<1. Preface> 1-2
■ Notes on the User’s Manual ■ For Safe Use of Product
• This manual should be delivered to the end user. Please give your attention to the followings.
• This manual and the identification tag attached
(a) Installation
on packing box are essential parts of the
product; keep them in a safe place for future • The instrument must be installed by an expert
reference. engineer or a skilled personnel. The procedures
• The information contained in this manual is described about INSTALLATION are not
subject to change without prior notice. permitted for operators.
• The information contained in this manual, in • In case of high process temperature, care
whole or part, shall not be transcribed or copied should be taken not to burn yourself because
without notice. the surface of the case reaches a high
• In no case does this manual guarantee temperature.
the merchant ability of the transmitter or its • All installation shall comply with local installation
adaptability to a specific client need. requirement and local electrical code.
• Should any doubt or error be found in this (b) Wiring
manual, submit inquiries to your local dealer.
• No special specifications are contained in this • The instrument must be installed by an expert
manual. When products whose suffix code engineer or a skilled personnel. The procedures
or optional codes contain code “Z” and an described about WIRING are not permitted for
exclusive document is attached, please read it operators.
along with this manual. • Please confirm that voltages between the
• Changes to specifications, structure, and power supply and the instrument before
components used may not lead to the revision connecting the power cables and that the
of this manual unless such changes affect the cables are not powered before connecting.
function and performance of the transmitter. (c) Maintenance
■ Notes on Safety and Modifications • Please do not carry out except being written
• This product is designed to be used by a person to a maintenance descriptions. When these
with specialized knowledge. procedures are needed, please contact nearest
• Before handling the YTA, it is absolutely YOKOGAWA office.
imperative that users of this equipment read • Care should be taken to prevent the build up of
and observe the safety instructions mentioned drift, dust or other material on the display glass
in each section of the manual in order to ensure and name plate. In case of its maintenance, soft
the protection and safety of operators, the YTA and dry cloth is used.
itself and the system containing the transmitter. (d) Modification
We are not liable for any accidents arising out of
handling that does not adhere to the guidelines Yokogawa will not be liable for malfunctions or
established in the safety instructions. damage resulting from any modification made
• No maintenance should be performed on to this instrument by the customer.
explosionproof type temperature transmitters (e) Product Disposal
while the equipment is energized. If
The instrument should be disposed of in
maintenance is required with the cover open,
accordance with local and national legislation/
always first use a gas detector to check that no
regulations.
explosive gases are present.
• If the user attempts to repair or modify an (f) Authorized Representative in EEA
explosionproof type transmitter and is unable In relation to the CE Marking, The authorized
to restore it to its original condition, damage to representative for this product in the EEA
the explosionproof features result, leading to (European Economic Area) is:
dangerous conditions. Contact your authorized Yokogawa Europe B.V.
Yokogawa Electric Corporation representative Euroweg 2, 3825 HD Amersfoort,The
for repairs or modifications of an explosionproof Netherlands
type transmitter.
IM 01C50G01-01EN
<1. Preface> 1-3
■ Warranty
(g) Morocco conformity mark
• The warranty period of the instrument is written
This conformity mark indicates that the product on the estimate sheet that is included with
complies with Moroccan safety and EMC your purchase. Any trouble arising during the
requirements. warranty period shall be repaired free of charge.
• Inquiries with regard to problems with the
Symbols used in this manual instrument shall be accepted by the sales outlet
The YTA temperature transmitter and this manual or our local dealer representative.
use the following safety related symbols and • Should the instrument be found to be defective,
signals. inform us of the model name and the serial
number of the instrument together with a
detailed description of nonconformance and
WARNING a progress report. Outline drawings or related
Contains precautions to protect against the data will also be helpful for repair.
chance of explosion or electric shock which, • Whether or not the defective instrument is
if not observed, could lead to death or serious repaired free of charge depends on the result of
injury. our inspection.
IM 01C50G01-01EN
<1. Preface> 1-4
■ Control of Pollution Caused by the Product
This is an explanation for the product based on “Control of Pollution caused by Electronic Information
Products” in the People’s Republic of China.
IM 01C50G01-01EN
<2. Notes on Handling> 2-1
2. Notes on Handling
The YTA temperature transmitter is fully 2.2 Transport
factorytested upon shipment. When the YTA is
delivered, check the appearance for damage, To prevent damage while in transit, leave the
and also check that the transmitter mounting transmitter in the original shipping container until it
parts shown in Figure 2.1 are included with your reaches the installation site.
shipment. If “No Mounting Bracket” is indicated, no
transmitter mounting bracket is included. 2.3 Storage
When an extended storage period is expected,
observe the following precautions:
Bracket
fastening bolt 1. If at all possible, store the transmitter in
U-bolt nut factoryshipped condition, that is, in the original
shipping container.
2. Choose a storage location that satisfies the
Spring Horizontal
Vertical pipe washer pipe mounting
following requirements.
mounting
bracket bracket • A location that is not exposed to rain or water.
Spring
• A location subject to a minimum of vibration or
Transmitter
washer
fastening bolt impact.
U-bolt • The following temperature and humidity range
Bracket is recommended. Ordinary temperature and
U-bolt nut
fastening nut humidity (25°C, 65%) are preferable.
F0201.ai Temperature:
Figure 2.1 Transmitter mounting parts No Integral indicator –40 to 85°C
With Integral indicator –30 to 80°C
Humidity: 0 to 100% RH (at 40°C)
2.1 Nameplate 3. The performance of the transmitter may
be impaired if stored in an area exposed to
The model name and specifications are written on
direct rain and water. To avoid damage to
the name plate attached to the case.
the transmitter, install it immediately after
removal from shipping container. Follow wiring
instructions in Chapter 5.
F0202.ai
IM 01C50G01-01EN
<2. Notes on Handling> 2-2
2.4 Choosing the Installation 2.6 Insulation Resistance Test
Location and Withstand Voltage Test
Although the temperature transmitter is designed to
operate in a vigorous environment, to maintain
CAUTION
stability and accuracy, the following is
recommended: (1) Overvoltage of the test voltage that is so
(1) Ambient Temperature small that it does not cause an dielectric
breakdown may in fact deteriorate insulation
It is preferable to not to expose the instrument to and lower the safety performance; to prevent
extreme temperatures or temperature fluctuations. this it is recommended that the amount of
If the instrument is exposed to radiation heat testing be kept to a minimum.
a thermal protection system and appropriate (2) The voltage for the insulation resistance
ventilation is recommended. test must be 500 V DC or lower, and the
(2) Environmental Requirements voltage for the withstand voltage test must
be 500 V AC or lower. Failure to heed these
Do not allow the instrument to be installed in a guidelines may cause faulty operation.
location that is exposed to corrosive atmospheric (3) For with a lighting protector (option code:/A),
conditions. When using the instrument in a please remove the lightning protector from
corrosive environment, ensure the location is well terminal at the test. In case of testing with
ventilated. the lightning protector, the voltage for the
The unit and its wiring should be protected from insulation resistance test must be 100V DC
exposure to rainwater. or lower, and the voltage for the withstand
(3) Impact and Vibration voltage test must be 100V AC or lower.
Failure to heed these guidelines may cause
It is recommended that the instrument be installed
faulty operation.
in a location that is subject to a minimum amount of
impact and vibration.
Follow the steps below to perform the test, the
wiring of the transmission line must be removed
2.5 Use of a Transceiver before initiating testing.
Although the temperature transmitter is designed Testing between the output terminal and
to resist influence from high frequency noise; input terminal
use of a transceiver in the vicinity of installation 1. Lay transition wiring between the + terminal,
may cause problems. Installing the transmitter in the – terminal, and the check terminal of the
an area free from high frequency noise (RFI) is terminal box.
recommended. 2. Lay wiring across terminals 1, 2, 3, 4, and 5 of
the terminal box.
3. Connect the insulation resistance meter (with
the power turned OFF) between the transition
wiring of Steps 1 and 2 above. The polarity of
the input terminals must be positive and that of
the output terminals must be negative.
4. Turn the power of the insulation resistance
meter ON and measure the insulation
resistance. The duration of the applied voltage
must be the period during which 100MΩ
or more is confirmed (or 20MΩ if the unit is
equipped with a lightning protector).
IM 01C50G01-01EN
<2. Notes on Handling> 2-3
5. Upon completion of the test, remove the 3. Upon completion of the test, remove the
insulation resistance meter, connect a 100KΩ insulation resistance meter, connect a 100KΩ
resistor between the transition wiring, and resistor between the transition wiring and the
allow the electricity to discharge. Do not grounding terminal, and allow the electricity to
touch the terminal with your bare hands while discharge. Do not touch the terminal with your
the electricity is discharging for more than 1 bare hands while the electricity is discharging
second. for more than 1 second.
Testing between the output terminal and
2.6.2 Withstand voltage test procedure
grounding terminal
1. Lay transition wiring between the + terminal, Testing between the output terminal and
the - terminal, and the check terminal of the the input terminal
terminal box, then connect an insulation 1. Lay transition wiring between the + terminal,
resistance meter (with the power turned OFF) the – terminal, and the check terminal of the
between the transition wiring and the grounding terminal box.
terminal. The polarity of the transition wiring 2. Lay transition wiring between terminals 1, 2, 3,
must be positive and that of the grounding 4 and 5 of the terminal box.
terminal must be negative. 3. Connect the withstand voltage tester (with
2. Turn the power of the insulation resistance the power turned OFF) between the transition
meter ON and measure the insulation wiring shown in Steps 1 and 2 above.
resistance. The duration of the applied voltage 4. After setting the current limit value of the
must be the period during which 100MΩ withstand voltage tester to 10mA, turn
or more is confirmed (or 20MΩ if the unit is the power ON, and carefully increase the
equipped with a lightning protector). impressed voltage from 0V to the specified
3. Upon completion of the test, remove the value.
insulation resistance meter, connect a 100KΩ 5. The voltage at the specified value must remain
resistor between the transition wiring and the for a duration of one minute.
grounding terminal, and allow the electricity to 6. Upon completion of the test, carefully reduce
discharge. Do not touch the terminal with your the voltage so that no voltage surge occurs.
bare hands while the electricity is discharging
for more than 1 second. Testing between the output terminal and
the grounding terminal
Testing between the input terminal and
1. Lay the transition wiring between the + terminal,
grounding terminal
the - terminal and the check terminal of the
1. Lay transition wiring between terminals 1, 2, terminal box, and connect the withstand voltage
3, 4 and 5 of the terminal box, and connect the tester (with the power turned OFF) between the
insulation resistor (with the power turned OFF) transition wiring and the grounding terminal.
between the transition wiring and the grounding Connect the grounding side of the withstand
terminal. The polarity of the transition wiring voltage tester to the grounding terminal.
must be positive and that of the grounding 2. After setting the current limit value of the
terminal must be negative. withstand voltage tester to 10mA, turn the
2. Turn the power of the insulation resistance power ON, and gradually increase the
meter ON and measure the insulation impressed voltage from 0V to the specified
resistance. The duration of the applied voltage value.
must be the period during which 100MΩ 3. The voltage at the specified value must remain
or more is confirmed (or 20MΩ if the unit is for a duration of one minute.
equipped with a lightning protector). 4. Upon completion of the test, carefully reduce
the voltage so that no voltage surge occurs.
IM 01C50G01-01EN
<2. Notes on Handling> 2-4
Testing between the input terminal and 2.7.1 ATEX Certification
the grounding terminal
1. Lay the transition wiring across terminals 1, 2, (1) Technical Data
3, 4, and 5 of the terminal box and connect the a) ATEX intrinsically safe approval
withstand voltage tester (with the power turned
Caution for ATEX intrinsically safe approval.
OFF) between the transition wiring and the
grounding terminal. Connect the grounding side Note 1. Certification information
of the withstand voltage tester to the grounding 4 - 20mA type
terminal. • YTA610 and YTA710 with /KU2 temperature
2. After setting the current limit value of the transmitter (4 - 20mA type) is applicable for use
withstand voltage tester to 10mA, turn the in hazardous locations.
power ON, and gradually increase the [Intrinsically safe ia]
impressed voltage from 0V to the specified • Applicable Standard:
value. EN 60079-0: 2012+A11:2013,
3. The voltage at the specified value must remain EN 60079-11: 2012
for a duration of one minute. • Certificate No. FM16ATEX0019X
4. Upon completion of the test, carefully reduce • Type of protection and marking code:
the voltage so that no voltage surge occurs. II 1 G Ex ia IIC T5…T4 Ga
II 2 (1) D Ex ia [ia Da] IIIC T135°C Db
2.7 Installation of Explosion • Ambient Temperature:
–40 to 70°C for T4, –40 to 50°C for T5,
Protected Type Transmitters –30 to 70°C for IIIC
In this section, further requirements and differences • Enclosure: IP66/IP67
and for explosionproof type instrument are • Electrical parameters:
described. For explosionproof type instrument, Supply/Output circuit: Terminals: +, -
the description in this chapter is prior to other Ui=30V, Ii=200mA, Pi=1.0W, Ci=22nF,
description in this users manual. Li=0mH
Sensor circuit: Terminals: 1,2,3,4,5
Uo=6V, Io=90mA, Po=135mW, Co=10μF,
CAUTION Lo=3.9mH
To preserve the safety of explosionproof • Dielectric strength: 500 V a.c.r.m.s.,1 min
equipment requires great care during mounting, (See specific conditions of use)
wiring, and piping. Safety requirements also [Intrinsically safe ic]
place restrictions on maintenance and repair • Applicable Standard:
activities. Please read the following sections very EN 60079-0: 2012+A11:2013,
carefully. EN 60079-11: 2012
• Certificate Not Applicable as per Annex VIII to
ATEX 2014/34/EU
• Type of protection and marking code:
II 3 G Ex ic IIC T5...T4 Gc
• Ambient Temperature:
–30 to 70°C for T4, –30 to 50°C for T5
• Enclosure: IP66/IP67
• Overvoltage category: I
• Electrical parameters:
Supply/Output circuit: Terminals: +, -
Ui=30V, Ci=22nF, Li=0mH
Sensor circuit: Terminals: 1,2,3,4,5
Uo=6V, Io=90mA, Po=135mW, Co=10μF,
Lo=3.9mH
• Dielectric strength: 500 V a.c.r.m.s.,1 min
(See specific conditions of use)
IM 01C50G01-01EN
<2. Notes on Handling> 2-5
Fieldbus type
• YTA610 and YTA710 with /KU25 temperature WARNING
transmitter (Fieldbus type) is applicable for use
in hazardous locations. Specification conditions of use
[Intrinsically safe ia] • Electrostatic charges on the non-metallic
• Applicable Standard: parts (excluding glass parts) or coated parts
EN 60079-0: 2012+A11:2013, of the Temperature Transmitter shall be
EN 60079-11: 2012 avoided.
• Certificate No. FM16ATEX0019X • When the enclosure of the Temperature
• Type of protection and marking code: Transmitter is made of aluminum alloy, if
II 1 G Ex ia IIC T4 Ga it is mounted in an area where the use of
II 2 (1) D Ex ia [ia Da] IIIC T135°C Db Category 1G equipment is required, it must
• Ambient Temperature: be installed such that, even in the event
–55 to 60°C for T4, –30 to 60°C for IIIC of rare incidents, an ignition source due to
• Enclosure: IP66/IP67 impact and/or friction sparks is excluded.
• Electrical parameters: • The dielectric strength of 500V r.m.s
Supply/Output circuit: Terminals: +, - between the intrinsically safe circuit and the
FISCO field device or enclosure of the Temperature Transmitter
Ui=30V, Ii=300mA, Pi=1.2W, Ci=2.2nF, is limited, only by the removable surge
Li=0mH absorber F9220AR.
Sensor circuit: Terminals: 1,2,3,4,5
Uo=6V, Io=90mA, Po=135mW, Co=10μF,
Lo=3.9mH WARNING
• Dielectric strength: 500 V a.c.r.m.s.,1 min
(See specific conditions of use) WARNING:
[Intrinsically safe ic ] ELECTROSTATIC CHARGE MAY CAUSE
• Applicable Standard: AN EXPLOSION HAZARD. AVOID ANY
EN 60079-0:2012+A11:2013, ACTIONS THAT CAUSE THE GENERATION
EN 60079-11:2012 OF ELECTROSTATIC CHARGE, SUCH AS
• Certificate Not Applicable as per Annex VIII to RUBBING WITH A DRY CLOTH ON COATING
ATEX 2014/34/EU FACE OF THE PRODUCT.
• Type of protection and marking code:
II 3 G Ex ic IIC T4 Gc
• Ambient Temperature: –30 to 70°C Note 2. Note for multiple types of protection
• Enclosure: IP66/IP67 (KU2 and KU25)
• Overvoltage category: I • For the installation of this transmitter, once a
• Electrical parameters: particular type of protection is selected, any
Supply/Output circuit: Terminals: +, - other type of protection cannot be used. The
FISCO field device or installation must be in accordance with the
Ui=32V, Ci=2.2nF, Li=0mH description about the type of protection in this
Sensor circuit: Terminals: 1,2,3,4,5 instruction manual. Cross out the unnecessary
Uo=6V, Io=90mA, Po=135mW, Co=10μF, type of protection on the name plate in the
Lo=3.9mH following ways.
• Dielectric strength: 500 V a.c.r.m.s.,1 min
(See specific conditions of use)
IM 01C50G01-01EN
<2. Notes on Handling> 2-6
Note 3. Conditions for safe use b) ATEX Flameproof Type and Dust Ignition
Proof Type
WARNING Caution for ATEX Flameproof Type and Dust
Ignition Proof Type
• A modification of the equipment would
no longer comply with the construction Note 1. Certificate information
described in the certificate documentation. • YTA710 with /KF2, YTA610 and YTA710 with
• When the ambient temp. ≥68°C, use /KU2 and /KU25 temperature transmitters are
heatersisting cables and cable glands ≥75°C applicable for use in hazardous locations.
(applicable only when Ex iaD or Ex ic is • No. KEMA 07ATEX0130
selected) • Applicable Standard:
• Potential electrostatic charging hazard (see 6) EN 60079-0:2012+A11:2013,
EN 60079-1:2014, EN 60079-31:2014
• Type of Protection and Marking Code:
1. Cable entry devices satisfying IP66/IP67 should
II 2 G Ex db IIC T6/T5 Gb,
be applied when installed in a hazardous area,
II 2 D Ex tb IIIC T70°C / T90°C Db
and redundant holes for cable entry should be
• Ambient Temperature for Gas Atmospheres:
closed by suitable blanking elements.
–40 to 75°C (T6), –40 to 80°C (T5)
2. The type of threads is indicated at the cable
• Ambient Temperature for Dust Atmospheres:
entry, using the following marking.
–30 to 65°C (T70°C), –30 to 80°C (T90°C)
Screw Size Marking • Degree of protection of enclosure: IP66/IP67
ISO M20×1.5 female M • Supply Voltage : 42 V dc max. (4 to 20 mA type)
ANSI 1/2 NPT female N F0203.ai : 32 V dc max. (Fieldbus type)
3. The equipment should be used in explosive • Output Signal : 4 to 20 mA
atmospheres together with an associated : 24 mA dc max. (Fieldbus type)
apparatus, following the instructions of this Note 2. Installation
equipment and the connected associated • Cable glands, adapters and/or blanking
apparatus. Connection at the wiring terminals elements with a suitable IP rating shall be of Ex
should be made correctly. d IIC/Ex tb IIIC certified by ATEX and shall be
4. The selected type of the Ex marking on the installed so as to maintain the specific degree of
name plate should be indicated. For this protection (IP Code) of the equipment.
purpose, the tick boxes can be used as follows. • All wiring shall comply with local installation
Ex ia IIC T4 Ga requirement.
Ex iaD [iaD 20] 21 IP6X T135°C • When the combination type is installed tick
Ex ic IIC T4 Gc the box of the selected type of protection on
5. It is forbidden to change the configuration of the label when the transmitter is installed in
the equipment except for the removable surge order to avoid confusion. Permanently mark
absorber, to ensure the explosion protection the protection type installed. Once the type is
performance of the equipment. marked, it cannot be changed.
6. If the equipment is mounted in an area where e. g. In case of selecting “db”, not “tb” or
explosive atmospheres may be present, it must other type of protections
be installed in such a way that the risk from Ex db IIC T6/T5 Gb
electrostatic discharges and propagating brush Ex tb IIIC T70°C/T90°C Db
discharges caused by rapid flow of dust are
avoided.
7. The equipment must be installed in accordance
with IIE029 A63, and with IEC60079-14 and/or
relevant local codes.
The type of threads is indicated near the cable
entry as follows.
8. Only personnel authorized by Yokogawa
Electric Corporation can repair the equipment.
IM 01C50G01-01EN
<2. Notes on Handling> 2-7
Note 3. Operation (2) Electrical Connection
• Keep “WARNING” on the equipment as follows.
The type of electrical connection is stamped near
WARNING: AFTER DE-ENERGIZING, DELAY
the electrical connection port according to the
10 MINUTES BEFORE OPENING.
following marking.
WHEN THE AMBIENT
TEMP.≥70°C, USE THE HEAT- Screw Size Marking
RESISTING CABLES & CABLE ISO M20×1.5 female M
GLANDS ≥90°C. ANSI 1/2 NPT female N
POTENTIAL ELECTROSTATIC
CHARGING HAZARD -SEE
USER’S MANUAL
• Take care not to generate mechanical spark
when access to the instrument and peripheral
devices in hazardous location. Location of the marking
F0204.ai
Note 4. Specific Condition of use
(3) Installation
WARNING
WARNING
• Electrostatic charge may cause an explosion
hazard. Avoid any actions that cause the All wiring shall comply with local installation
generation of electrostatic charge, such as requirement and local electrical code.
rubbing with a dry cloth on coating face of
the product.
• If the YTA is mounted in an area where the (4) Operation
use of Category 2D equipment is required,
it shall be installed in such a way that the WARNING
risk from electrostatic discharges and
propagating brush discharges caused by • OPEN CIRCUIT BEFORE REMOVING
rapid flow of dust is avoided. COVER. INSTALL IN ACCORDANCE WITH
• To satisfy IP66 or IP67, apply waterproof THIS USER’S MANUAL
glands to the electrical connection port. • Take care not to generate mechanical
• If the equipment is affected by external sparking when access to the instrument and
sources of heating or cooling from plant peripheral devices in hazardous locations.
facilities, make sure that the parts in contact
with the equipment or in the near vicinity of
the equipment do not exceed the ambient (5) Maintenance and Repair
temperature range of the equipment.
WARNING
Note 5. Maintenance and Repair The instrument modification or parts replacement
• The instrument modification or parts by other than authorized Representative of
replacement by other than authorized Yokogawa Electric Corporation is prohibited and
representative of Yokogawa Electric will void the certification.
Corporation is prohibited and will void ATEX
Flameproof Certification.
Note 6. Surge absorber
• The surge absorber can be removed from, or
added to the equipment.
IM 01C50G01-01EN
<2. Notes on Handling> 2-8
(6) Name Plate Intrinsically safe approval and Flameproof and Dust
ignition approval (Fieldbus type)
YTA710 /KF2 Flameproof and Dust ignition proof type
F0205.ai
MODEL: Specified model code.
SUFFIX: Specified suffix code.
Intrinsically safe approval and Flameproof and Dust STYLE: Style code.
ignition approval (4 - 20 mA type) SUPPLY: Supply voltage.
NO.: Serial number and year of production*1.
OUTPUT: Output signal.
FACTORY CAL: Specified calibration range.
TOKYO 180-8750 JAPAN:
The manufacturer name and the address*2.
No. FM16ATEX0019X T4: -40 ≤ Ta ≤ 70°C IP66/IP67
II 1 G Ex ia IIC T5…T4 Ga T5: -40 ≤ Ta ≤ 50°C *1: The product-producing country.
II 2(1) D Ex ia [ia Da] IIIC T135°C Db IIIC: -30 ≤ Ta ≤ 70°C WARNING
Supply/Output: Sensor: WHEN THE AMBIENT TEMP.≥68°C, *2: “180-8750” is a postal code which represents the
Ui=30V, Ii=200mA, Pi=1.0W Uo=6.0V, Io=90mA, Po=135mW
Ci=22nF, Li=0mH Co=10µF, Lo=3.9mH
USE HEAT-RESISTING CABLES
following address.
AND CABLE GLANDS≥75°C.
II 3 G Ex ic IIC T5…T4 Gc
Supply/Output: Sensor:
T4: -30 ≤ Ta ≤ 70°C
T5: -30 ≤ Ta ≤ 50°C
POTENTIAL ELECTROSTATIC 2-9-32 Nakacho, Musashino-shi, Tokyo Japan
CHARGING HAZARD
Ui=30V, Ci=22nF, Li=0mH Uo=6.0V, Io=90mA, Po=135mW
Co=10µF, Lo=3.9mH
-SEE USER′S MANUAL
*3: The identification number of Notified Body.
No. KEMA07ATEX0130
Ex db IIC T6/T5 Gb
TEMP. CLASS T6/T5 ENCLOSURE: IP66/IP67
Tamb(Gas) -40 to +75°C(T6), -40 to +80°C(T5)
*4: Production year/month.
II 2 GD Ex tb IIIC T70°C/T90°C Db (Dust) -30 to +65°C(T70°C), -30 to +80°C(T90°C)
WARNING AFTER DE-ENERGIZING, DELAY 10 MINUTES BEFORE OPENING. WHEN THE
AMBIENT TEMP.≥70°C, USE THE HEAT-RESISTING CABLES & CABLE GLANDS≥90°C.
POTENTIAL ELECTROSTATIC CHARGING HAZARD -SEE USER′S MANUAL
F0206.ai
IM 01C50G01-01EN
<2. Notes on Handling> 2-9
2.7.2 IECEx Certification Fieldbus type
• YTA610 and YTA710 with /SU25 temperature
(1) Technical Data transmitter (Fieldbus type) is applicable for use
a) IECEx intrinsically safe approval in hazardous locations.
• Applicable Standard:
Caution for IECEx intrinsically safe approval. IEC 60079-0: 2017, IEC 60079-11: 2011
Note 1. Certification information • Certificate No. IECEx FMG 16.0014X
4 - 20mA type • Type of protection and marking code:
• YTA610 and YTA710 with /SU2 temperature Ex ia IIC T4 Ga
transmitter (4 - 20mA type) is applicable for use Ex ic IIC T4 Gc
in hazardous locations. Ex ia [ia Da] IIIC T135°C Db
• Applicable Standard: • Ambient Temperature(Ex ia):
IEC 60079-0: 2017, IEC 60079-11: 2011 –55 to 60°C for T4, –30 to 60°C for IIIC
• Certificate No. IECEx FMG 16.0014X • Ambient Temperature(Ex ic): –30 to 70°C
• Type of protection and marking code: • Enclosure: IP66/IP67
Ex ia IIC T5…T4 Ga • Overvoltage category: I
Ex ic IIC T5…T4 Gc • Electrical parameters (Ex ia):
Ex ia [ia Da] IIIC T135°C Db Supply/Output circuit: Terminals: +, -
• Ambient Temperature: FISCO field device or
–40 to 70°C for T4, –40 to 50°C for T5, Ui=30V, Ii=300mA, Pi=1.2W, Ci=2.2nF,
–30 to 70°C for IIIC (Ex ia) Li=0mH
–30 to 70°C for T4, –30 to 50°C for T5 (Ex ic) Sensor circuit: Terminals: 1, 2, 3, 4, 5
• Enclosure: IP66/IP67 Uo=6V, Io=90mA, Po=135mW, Co=10μF,
• Overvoltage category: I Lo=3.9mH
• Electrial parameters (Ex ia): • Electrical parameters (Ex ic):
Supply/Output circuit: Terminals: +, - Supply/Output circuit: Terminals: +, -
Ui=30V, Ii=200mA, Pi=1.0W, Ci=22nF, FISCO field device or
Li=0mH Ui=32V, Ci=2.2nF, Li=0mH
Sensor circuit: Terminals: 1, 2, 3, 4, 5 Sensor circuit: Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Uo=6V, Io=90mA, Po=135mW, Co=10μF,
Lo=3.9mH Lo=3.9mH
• Electrial parameters (Ex ic): • Dielectric strength: 500 V a.c.r.m.s.,1 min
Supply/Output circuit: Terminals: +, - (See specific conditions of use)
Ui=30V, Ci=22nF, Li=0mH
Sensor circuit: Terminals: 1, 2, 3, 4, 5 WARNING
Uo=6V, Io=90mA, Po=135mW, Co=10μF,
Lo=3.9mH Specific conditions of use
• Dielectric strength: 500 V a.c.r.m.s.,1 min • Electrostatic charges on the non-metallic
(See specific conditions of use) parts (excluding glass parts) or coated parts
of the Temperature Transmitter shall be
avoided.
• When the enclosure of the Temperature
Transmitter is made of aluminum alloy, if it is
mounted in an area where the use of EPL Ga
equipment is required, it must be installed
such that, even in the event of rare incidents,
an ignition source due to impact and/or
friction sparks is excluded.
• The dielectric strength of 500 V r.m.s.
between the intrinsically safe circuit and the
enclosure of the Temperature Transmitter
is limited, only by the removable surge
absorber F9220AR.
IM 01C50G01-01EN
<2. Notes on Handling> 2-10
4. The selected type of the Ex marking on the
WARNING name plate should be indicated. For this
purpose, the tick boxes can be used as follows.
WARNING: Ex ia IIC T4 Ga
ELECTROSTATIC CHARGE MAY CAUSE Ex iaD [iaD 20] 21 IP6X T135°C
AN EXPLOSION HAZARD. AVOID ANY Ex ic IIC T4 Gc
ACTIONS THAT CAUSE THE GENERATION 5. It is forbidden to change the configuration of
OF ELECTROSTATIC CHARGE, SUCH AS the equipment except for the removable surge
RUBBING WITH A DRY CLOTH ON COATING absorber, to ensure the explosion protection
FACE OF THE PRODUCT. performance of the equipment.
6. If the equipment is mounted in an area where
explosive atmospheres may be present, it must
Note 2. Note for multiple types of protection
be installed in such a way that the risk from
(SU2 and SU25)
electrostatic discharges and propagating brush
• For the installation of this transmitter, once a
discharges caused by rapid flow of dust are
particular type of protection is selected, any
avoided.
other type of protection cannot be used. The
7. The equipment must be installed in accordance
installation must be in accordance with the
with IIE029 A63, and with IEC60079-14 and/or
description about the type of protection in this
relevant local codes.
instruction manual. Cross out the unnecessary
The type of threads is indicated near the cable
type of protection on the name plate in the
entry as follows.
same ways of ATEX.
8. Only personnel authorized by Yokogawa
Note 3. Conditions for safe use Electric Corporation can repair the equipment.
b) IECEx Flameproof Type and Dust Ignition
WARNING Proof Type
• A modification of the equipment would Caution for IECEx flameproof type and Dust Ignition
no longer comply with the construction Proof Type
described in the certificate documentation. Note 1. Certification information
• When the ambient temp. ≥68°C, use • YTA710 with /SF2, YTA610 and YTA710 with
heatersisting cables and cable glands ≥75°C /SU2 and /SU25 temperature transmitters are
(applicable only when Ex iaD or Ex ic is applicable for use in hazardous locations.
selected) • No. IECEx KEM 07.0044
• Potential electrostatic charging hazard (see 6) • Applicable Standard: IEC 60079-0:2011,
IEC 60079-1:2014-06, IEC 60079-31:2013
1. Cable entry devices satisfying IP66/IP67 should • Type of Protection and Marking Code:
be applied when installed in a hazardous area, Ex db IIC T6/T5 Gb,
and redundant holes for cable entry should be Ex tb IIIC T70°C / T90°C Db
closed by suitable blanking elements. • Ambient Temperature for Gas Atmospheres:
2. The type of threads is indicated at the cable –40 to 75°C (T6), –40 to 80°C (T5)
entry, using the following marking. • Ambient Temperature for Dust Atmospheres:
Screw Size Marking
–30 to 65°C (T70°C), –30 to 80°C (T90°C)
• Enclosure: IP66/IP67
ISO M20×1.5 female M
ANSI 1/2 NPT female N
• Supply Voltage : 42 V dc max. (4 to 20 mA type)
F0203.ai
: 32 V dc max. (Fieldbus type)
3. The equipment should be used in explosive • Output Signal : 4 to 20 mA
atmospheres together with an associated : 24 mA dc max. (Fieldbus type)
apparatus, following the instructions of this
equipment and the connected associated
apparatus. Connection at the wiring terminals
should be made correctly.
IM 01C50G01-01EN
<2. Notes on Handling> 2-11
Note 2. Installation Note 4. Specific conditions of use
• Cable glands, adapters and/or blanking
elements with a suitable IP rating shall be of Ex
WARNING
d IIC/Ex tb IIIC certified by IECEx and shall be
installed so as to maintain the specific degree of • Electrostatic charge may cause an explosion
protection (IP Code) of the equipment. hazard. Avoid any actions that cause the
• All wiring shall comply with local installation generation of electrostatic charge, such as
requirement. rubbing with a dry cloth on coating face of
• When the combination type is installed tick the product.
the box of the selected type of protection on • If the YTA is mounted in an area where the
the label when the transmitter is installed in use of EPL Db equipment is required, it shall
order to avoid confusion. Permanently mark be installed in such a way that the risk from
the protection type installed. Once the type is electrostatic discharges and propagating
marked, it cannot be changed. brush discharges caused by rapid flow of
e.g. In case of selecting “db”, not “tb” or other dust is avoided.
type of protections • To satisfy IP66 or IP67, apply waterproof
Ex db IIC T6/T5 Gb glands to the electrical connection port.
Ex tb IIIC T70°C/T90°C Db • If the equipment is affected by external
Note 3. Operation sources of heating or cooling from plant
• Keep strictly the “WARNING” on the label on facilities, make sure that the parts in contact
the transmitter. with the equipment or in the near vicinity of
WARNING: AFTER DE-ENERGIZING, DELAY the equipment do not exceed the ambient
10 MINUTES BEFORE OPENING. temperature range of the equipment.
WHEN THE AMBIENT
TEMP.≥70°C, USE THE HEAT-
Note 5. Maintenance and Repair
RESISTING CABLES & CABLE
• The instrument modification or parts
GLANDS ≥90°C.
replacement by other than authorized
POTENTIAL ELECTROSTATIC
representative of Yokogawa Electric
CHARGING HAZARD -SEE
Corporation is prohibited and will void IECEx
USER’S MANUAL
Flameproof Certification.
• Take care not to generate mechanical spark
when access to the instrument and peripheral Note 6. Surge absorber
devices in hazardous location. • The surge absorber can be removed from, or
added to the equipment.
(2) Electrical Connection
The type of electrical connection is stamped near
the electrical connection port according to the
following marking.
IM 01C50G01-01EN
<2. Notes on Handling> 2-12
(3) Name Plate Intrinsically safe approval and Flameproof and Dust
ignition approval (Fieldbus type)
YTA710 /SF2 Flameproof and Dust ignition proof type
IP66/IP67
Ex ia IIC T4 Ga
Ex ia [ia Da] IIIC T135°C Db WARNING
No.
WARNING FISCO field device Supply/Output: WHEN THE AMBIENT TEMP.≥68°C,
Ex tb IIIC T70°C/T90°C Db AFTER DE-ENERGIZING, DELAY Entity Parameters Ui=30V, Ii=300mA, Pi=1.2W, Ci=2.2nF, Li=0mH USE HEAT-RESISTING CABLES
10 MINUTES BEFORE OPENING. Sensor:
TEMP. CLASS T6/T5 AND CABLE GLANDS≥75°C.
WHEN THE AMBIENT TEMP.≥70°C, Uo=6.0V, Io=90mA, Po=135mW, Co=10µF, Lo=3.9mH
POTENTIAL ELECTROSTATIC
USE THE HEAT-RESISTING
CHARGING HAZARD
CABLES & CABLE GLANDS≥90°C. Supply/Output:
POTENTIAL ELECTROSTATIC Ex ic IIC T4 Gc
Ui=32V, Ci=2.2nF, Li=0mH
CHARGING HAZARD FISCO field device Sensor:
ENCLOSURE: IP66/IP67
-SEE USER’ S MANUAL Entity Parameters Uo=6.0V, Io=90mA, Po=135mW, Co=10µF, Lo=3.9mH
F0210.ai
IM 01C50G01-01EN
<2. Notes on Handling> 2-13
2.7.3 FM Certification Fieldbus type
• YTA610 and YTA710 with /FU15 temperature
(1) Technical Data transmitter (Fieldbus type) is applicable for use
a) FM (US) intrinsically safe approval/non- in hazardous locations.
incendive approval • Applicable standard:
FM Class 3600:2011, FM Class 3610:2015,
Caution for FM (US) intrinsically safe approval/non- FM Class 3611:2004, FM Class 3810:2018,
incendive approval. ANSI/ISA-60079-0:2013,
Note 1. Certification information ANSI/ISA-60079-11:2014,
4 - 20mA type ANSI/IEC 60529:2004, ANSI/UL 61010-1:2012,
• YTA610 and YTA710 with /FU1 temperature ANSI/UL 61010-2-30:2012, NEMA 250:2003
transmitter (4 - 20mA type) is applicable for use • Marking/Rating
in hazardous locations. Intrinsically safe for
• Applicable standard: Class I, II, III Division 1 Groups A, B, C, D, E, F,
FM Class 3600:2011, FM Class 3610:2015, G T4
FM Class 3611:2004, FM Class 3810:2018, Class I, Zone 0 AEx ia IIC T4
ANSI/ISA-60079-0:2013, Non-incendive for
ANSI/ISA-60079-11:2014, Class I, II, Division 2, Groups A, B, C, D, F, G T4
ANSI/IEC 60529:2004, ANSI/UL 61010-1:2012, Class III Division 1 T4
ANSI/UL 61010-2-30:2012, NEMA 250:2003 Class I Zone 2 Group IIC T4
• Marking/Rating • Ambient Temperature: –55 to 60°C
Intrinsically safe for Class I, II, III Division 1, • Enclosure Type 4X, IP66/IP67
Groups A, B, C, D, E, F, G, T5…T4 • Electrical parameters:
Class I, Zone 0 AEx ia IIC T5…T4 Intrinsically safe for
Non-incendive for Class I, II, Division 2, Groups Supply/Output circuit:
A, B, C, D, F, G, T5…T4 Terminals: +, -
Class III, Division 1 T5…T4 FISCO field device or
Class I, Zone 2 Group IIC T5…T4 Ui=30V, Ii=300mA, Pi=1.2W, Ci=2.2nF,
• Ambient Temperature: Li=0mH
–40 to 70°C for T4, –40 to 50°C for T5 Sensor circuit:
• Enclosure Type 4X, IP66/IP67 Terminals: 1, 2, 3, 4, 5
• Electrical parameters: Uo=6V, Io=90mA, Po=135mW, Co=10μF,
Intrinsically safe for Lo=3.9mH
Supply/Output circuit: Non-incendive for
Terminals: +, - Supply/Output circuit:
Ui=30V, Ii=200mA, Pi=1.0W, Ci=22nF, Terminals: +, -
Li=0mH Ui=32V, Ci=2.2nF, Li=0mH
Sensor circuit: Sensor circuit:
Terminals: 1, 2, 3, 4, 5 Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Uo=6V, Io=90mA, Po=135mW, Co=10μF,
Lo=3.9mH Lo=3.9mH
Non-incendive for • Dielectric strength: 500 V a.c.r.m.s.,1 min
Supply/Output circuit: (See specific conditions of use)
Terminals: +, -
Ui=30V, Ci=22nF, Li=0mH
Sensor circuit:
Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF,
Lo=3.9mH
• Dielectric strength: 500 V a.c.r.m.s.,1 min
(See specific conditions of use)
IM 01C50G01-01EN
<2. Notes on Handling> 2-14
b) FM Explosionproof Type
WARNING Caution for FM Explosionproof type
Specific conditions of use Note 1. Certification information
• Electrostatic charges on the non-metallic • YTA710 with /FF1, YTA610 and YTA710 with
parts (excluding glass parts) or coated parts /FU1 and /FU15 temperature transmitter are
of the Temperature Transmitter shall be applicable for use in hazardous locations.
avoided. • Applicable Standard: FM Class 3600:2018,
• When the enclosure of the Temperature FM Class 3615:2018, FM Class 3810: 2005,
Transmitter is made of aluminum alloy, if it is NEMA250: 2014
mounted in Zone 0, it must be installed such • Explosionproof for Class I, Division 1, Groups
that, even in the event of rare incidents, an A, B, C, and D.
ignition source due to impact and/or friction • Dust-ignitionproof for Class II/III, Division 1,
sparks is excluded. Groups E, F and G.
• The dielectric strength of 500 V r.m.s. • Enclosure rating: TYPE 4X.
between the intrinsically safe circuit and the • Temperature Class: T6
enclosure of the Temperature Transmitter • Ambient Temperature: –40 to 60°C
is limited, only by the removable surge • Supply Voltage: 42 V dc max. (4 to 20 mA type)
absorber F9220AR. : 32 V dc max. (Fieldbus type)
• Output Signal: 4 to 20 mA
: 24 mA dc max. (Fieldbus type)
Note 2. Note for multiple types of protection
(FU1 and FU15) Note 2. Installation
• For the installation of this transmitter, once a • All wiring shall comply with National Electrical
particular type of protection is selected, any Code ANSI/NEPA70 and Local Electrical
other type of protection cannot be used. The Codes.
installation must be in accordance with the • “FACTORY SEALED, CONDUIT SEAL NOT
description about the type of protection in this REQUIRED”.
instruction manual. Cross out the unnecessary Note 3. Operation
type of protection on the name plate in the • Keep strictly the “WARNING” on the nameplate
same ways of ATEX. attached on the transmitter.
Note 3. Installation WARNING: OPEN CIRCUIT BEFORE
Installation should be in accordance with REMOVING COVER. “FACTORY
Control Drawing IIE029-A61. SEALED, CONDUIT SEAL
NOT REQUIRED”. AFTER DE-
ENERGIZING, DELAY 2 MINUTES
BEFORE OPENING. INSTALL
IN ACCORDANCE WITH THE
INSTRUCTION MANUAL
IM 01C50G01-01EN.
• Take care not to generate mechanical spark
when access to the instrument and peripheral
devices in hazardous location.
Note 4. Maintenance and Repair
• The instrument modification or parts
replacement by other than authorized
representative of Yokogawa Electric
Corporation is prohibited and will void Factory
Mutual Explosionproof Approval.
Note 5. Surge absorber
• The surge absorber can be removed from, or
added to the equipment.
IM 01C50G01-01EN
<2. Notes on Handling> 2-15
2.7.4 CSA Certification Fieldbus type
• YTA610 and YTA710 with /CU15 temperature
(1) Technical Data transmitter (Fieldbus type) is applicable for use
a) FM (Canada) intrinsically safe approval/non- in hazardous locations.
incendive approval • Applicable standard:
CAN/CSA-C22.2 No. 94.2-07,
Caution for FM (Canada) intrinsically safe approval/ C22.2 No.213:1987,
non-incendive approval. CAN /CSA-C22.2 No. 60079-0:11,
Note 1. Certification information CAN/CSA-C22.2 No. 60079-11:14,
4 - 20mA type CAN/CSA-C22.2 No. 60529:05,
• YTA610 and YTA710 with /CU1 temperature CAN/CSA-C22.2 No. 61010-1:12,
transmitter (4 - 20mA type) is applicable for use CAN/CSA-C22.2 No. 61010-2-030:12
in hazardous locations. • Marking/Rating
• Applicable standard: Intrinsically safe for
CAN/CSA-C22.2 No. 94.2-07, Class I, II, III Division 1, Groups A, B, C, D, E,
C22.2 No.213:1987, F, G T4
CAN /CSA-C22.2 No. 60079-0:11, Ex ia IIC T4 Ga
CAN/CSA-C22.2 No. 60079-11:14, Non-incendive for
CAN/CSA-C22.2 No. 60529:05, Class I, II, Division 2, Groups A, B, C, D, F,
CAN/CSA-C22.2 No. 61010-1:12, G T4
CAN/CSA-C22.2 No. 61010-2-030:12 Class III, Division 1 T4
• Marking/Rating • Ambient Temperature: –55 to 60°C
Intrinsically safe for • Enclosure Type 4X, IP66/IP67
Class I, II, III Division 1, Groups A, B, C, D, E, • Electrical parameters:
F, G, T5…T4 Intrinsically safe for
Ex ia IIC T5…T4 Ga Supply/Output circuit:
Non-incendive for Terminals: +, -
Class I, II, Division 2, Groups A, B, C, D, F, G, FISCO field device or
T5…T4 Ui=30V, Ii=300mA, Pi=1.2W, Ci=2.2nF,
Class III, Division 1 T5…T4 Li=0mH
• Ambient Temperature: Sensor circuit:
–40 to 70°C for T4, –40 to 50°C for T5 Terminals: 1, 2, 3, 4, 5
• Enclosure Type 4X, IP66/IP67 Uo=6V, Io=90mA, Po=135mW, Co=10μF,
• Electrical parameters: Lo=3.9mH
Intrinsically safe for Non-incendive for
Supply/Output circuit: Supply/Output circuit:
Terminals: +,- Terminals: +/-
Ui=30V, Ii=200mA, Pi=1.0W, Ci=22nF, Ui=32V, Ci=2.2nF, Li=0mH
Li=0mH Sensor circuit:
Sensor circuit: Terminals: 1, 2, 3, 4, 5
Terminals: 1, 2, 3, 4, 5 Uo=6V, Io=90mA, Po=135mW, Co=10μF,
Uo=6V, Io=90mA, Po=135mW, Co=10μF, Lo=3.9mH
Lo=3.9mH • Dielectric strength: 500 V a.c.r.m.s.,1 min
Non-incendive for (See specific conditions of use)
Supply/Output circuit:
Terminals: +,-
Ui=30V, Ci=22nF, Li=0mH
Sensor circuit:
Terminals: 1, 2, 3, 4, 5
Uo=6V, Io=90mA, Po=135mW, Co=10μF,
Lo=3.9mH
• Dielectric strength: 500 V a.c.r.m.s.,1 min
(See specific conditions of use)
IM 01C50G01-01EN
<2. Notes on Handling> 2-16
• Class I, Groups B, C and D;
WARNING • Class II, Groups E, F and G;
• Class III.
Specific conditions of use • Enclosure: TYPE 4X
• Electrostatic charges on the non-metallic • Temperature Class: T6
parts (excluding glass parts) or coated parts • Ambient Temperature: –40 to 60°C
of the Temperature Transmitter shall be • Supply Voltage: 42 V dc max. (4 to 20 mA type)
avoided. : 32 V dc max. (Fieldbus type)
• When the enclosure of the Temperature • Output Signal: 4 to 20 mA
Transmitter is made of aluminum alloy, if it is : 24 mA dc max. (Fieldbus type)
mounted in Zone 0, it must be installed such
Note 2. Installation
that, even in the event of rare incidents, an
• All wiring shall comply with Canadian Electrical
ignition source due to impact and/or friction
Code Part I and Local Electrical Codes.
sparks is excluded.
• The dielectric strength of 500 V r.m.s. Note 3. Operation
between the intrinsically safe circuit and the • Keep strictly the “WARNING” on the label
enclosure of the Temperature Transmitter attached on the transmitter.
is limited, only by the removable surge WARNING: OPEN CIRCUIT BEFORE
absorber F9220AR. REMOVING COVER. AFTER DE-
ENERGIZING, DELAY 2 MINUTES
BEFORE OPENING. OUVRIR LE
Note 2. Note for multiple types of protection CIRCUIT AVANT D’ENLEVER LE
(CU1 and CU15) COUVERCLE. APRÈS POWER-
• For the installation of this transmitter, once a OFF, ATTENDRE 2 MINUTES
particular type of protection is selected, any
AVANT D’OUVRIR.
other type of protection cannot be used. The
• Take care not to generate mechanical spark
installation must be in accordance with the
when access to the instrument and peripheral
description about the type of protection in this
devices in hazardous location.
instruction manual. Cross out the unnecessary
type of protection on the name plate in the Note 4. Maintenance and Repair
same ways of ATEX. • The instrument modification or parts
replacement by other than authorized
Note 3. Installation
representative of Yokogawa Electric
Installation should be in accordance with
Corporation is prohibited and will void Canadian
Control Drawing IIE029-A62.
Standards Explosionproof Certification.
b) CSA Explosionproof Type
Note 5. Surge absorber
Caution for CSA Explosionproof type • When Lightning Protector is removed or
Note 1. Certification information installed
• YTA710 with /CF1, YTA610 and YTA710 with “OPEN CIRCUIT BEFORE REMOVEING
/CU1 and /CU15 temperature transmitters are COVER.”, or “AFTER DE-ENERGIZING,
applicable for use in hazardous locations. DELAY 2 MINUTES BEFER OPENING.”
• Certificate 1089576
• Applicable Standard:
C22.2 No. 25-17, C22.2 No. 30-M1986,
C22.2 No. 94.2-15, C22.2 No. 142-M1987,
C22.2 No. 157-92, C22.2 No. 213-17,
C22.2 No.61010-1-12,
C22.2 No. 61010-2-030-12
IM 01C50G01-01EN
<2. Notes on Handling> 2-17
2.7.5 Control Drawing
Temperature Transmitter
Associated Apparatus
Sensor Input Supply/Output
1 + + +
Intrinsically Safe Apparatus 2
or
Simple Apparatus
3 − − −
4
C
5
Linear source
Model YTAxxx – J or – D
Sensor Input: Supply/Output:
Uo = 6.0 V Ui = 30 V
Io = 90 mA Ii = 200 mA
Po = 135 mW Pi = 1.0 W
Co = 10 μF Ci = 22 nF
Lo = 3.9 mH Li = 0 mH
IM 01C50G01-01EN
<2. Notes on Handling> 2-18
Control Drawing for ATEX and IECEx Ex ia
IM 01C50G01-01EN
<2. Notes on Handling> 2-19
IM 01C50G01-01EN
<2. Notes on Handling> 2-20
Control Drawing ATEX Ex ic
IM 01C50G01-01EN
<2. Notes on Handling> 2-21
Control Drawing ATEX Ex ic
+ +
− −
Model YTAxxx – F or – G
Temperature Transmitter
Model YTAxxx – F or – G
---------------
Sensor Input:
FISCO field device
Uo = 6.0 V
---------------
Io = 90 mA
Supply/Output:
Po = 135 mW
Ui = 32 V
Co = 10 μF
Ci = 2.2 nF
Lo = 3.9 mH
Li = 0 mH
Notes:
– The surge absorber F9220AR can be removed from, or added to the equipment.
– The equipment must be installed so that pollution degree 2 in accordance with EN 60664-1 is
maintained inside the enclosure.
– Cable glands, adapters and/or blanking elements shall be of Ex “n”, Ex “e” or Ex “d” and shall
be installed so as to maintain the specified degree of protection (IP Code) according to the
environmental conditions. IP must be at least IP54.
IM 01C50G01-01EN
<2. Notes on Handling> 2-22
Control Drawing IECEx Ex ic
Temperature Transmitter
Associated Apparatus
Sensor Input Supply/Output
1 + + +
Intrinsically Safe Apparatus 2
or
Simple Apparatus
3 − − −
4
C
5
Linear source
Model YTAxxx – J or – D
Sensor Input: Supply/Output:
Uo = 6.0 V Ui = 30 V
Io = 90 mA Ci = 22 nF
Po = 135 mW Li = 0 mH
Co = 10 μF
Lo = 3.9 mH
IM 01C50G01-01EN
<2. Notes on Handling> 2-23
Control Drawing IECEx Ex ic
+ +
− −
Model YTAxxx – F or – G
Temperature Transmitter
Model YTAxxx – F or – G
Sensor Input: Supply/Output:
Uo = 6.0 V Ui = 32 V
Io = 90 mA Ci = 2.2 nF
Po = 135 mW Li = 0 mH
Co = 10 μF
Lo = 3.9 mH
WARNING –WHEN THE AMBIENT TEMP. ≥68°C, USE HEAT-RESISTING CABLES AND
CABLE GLANDS ≥75°C
Notes:
– The surge absorber F9220AR can be removed from, or added to the equipment.
– The equipment must be installed so that pollution degree 2 in accordance with IEC 60664-1 is
maintained inside the enclosure.
– Cable glands, adapters and/or blanking elements shall be of Ex “n”, Ex “e” or Ex “d” and shall be
installed so as to maintain the specified degree of protection (IP Code) according to the environmental
conditions. IP must be at least IP54.
IM 01C50G01-01EN
<2. Notes on Handling> 2-24
Control Drawing for FM (US) intrinsically safe approval (4 - 20 mA type)
Temperature Transmitter
Associated Apparatus
Sensor Input Supply/Output
IM 01C50G01-01EN
<2. Notes on Handling> 2-25
Control Drawing for FM (US) Division 2 installation (4 - 20 mA type)
Temperature Transmitter
Associated Apparatus
Sensor Input Supply/Output
Model YTAxxx – J or – D
Sensor Input: Supply/Output:
Uo = 6.0 V Ui = 30 V
Io = 90 mA Ci = 22 nF
Po = 135 mW Li = 0 mH
Co = 10 μF
Lo = 3.9 mH
IM 01C50G01-01EN
<2. Notes on Handling> 2-26
Control Drawing for FM (US) intrinsically safe approval (Fieldbus type)
+ +
− −
See Note 4
Linear source or
Model YTAxxx – F or – G Field Device Field Device FISCO power supply
Temperature Transmitter
Model YTAxxx – F or – G
Sensor Input: Supply/Output:
Uo = 6.0 V Ui = 30 V
Io = 90 mA Ii = 300 mA
Po = 135 mW Pi = 1.2 W
Co = 10 μF Ci = 2.2 nF
Lo = 3.9 mH Li = 0 mH
IM 01C50G01-01EN
<2. Notes on Handling> 2-27
Control Drawing for FM (US) Division 2 installation (Fieldbus type)
Model YTAxxx – F or – G
Temperature Transmitter
Model YTAxxx – F or – G
Sensor Input: Supply/Output:
Uo = 6.0 V Ui = 32 V
Io = 90 mA Ci = 2.2 nF
Po = 135 mW Li = 0 mH
Co = 10 μF
Lo = 3.9 mH
IM 01C50G01-01EN
<2. Notes on Handling> 2-28
Control Drowing for FM (US) intrinsically safe approval/non-incendive approval
(4 - 20 mA & Fieldbus type)
IM 01C50G01-01EN
<2. Notes on Handling> 2-29
Control Drawing for FM (Canada) intrinsically safe approval (4 - 20mA type)
Temperature Transmitter
Associated Apparatus
Sensor Input Supply/Output
Model YTAxxx – J or – D
Sensor Input: Supply/Output:
Uo = 6.0 V Ui = 30 V
Io = 90 mA Ii = 200 mA
Po = 135 mW Pi = 1.0 W
Co = 10 μF Ci = 22 nF
Lo = 3.9 mH Li = 0 mH
IM 01C50G01-01EN
<2. Notes on Handling> 2-30
Control Drawing for FM (Canada) Division 2 installation (4 - 20 mA type)
Temperature Transmitter
Associated Apparatus
Sensor Input Supply/Output
IM 01C50G01-01EN
<2. Notes on Handling> 2-31
Control Drawing for FM (Canada) intrinsically safe approval (Fieldbus type)
+ +
− −
See Note 3
Linear source or
Field Device Field Device FISCO power supply
Model YTAxxx – F or – G
Temperature Transmitter
Model YTAxxx – F or – G
Sensor Input: Supply/Output:
Uo = 6.0 V Ui = 30 V
Io = 90 mA Ii = 300 mA
Po = 135 mW Pi = 1.2 W
Co = 10 μF Ci = 2.2 nF
Lo = 3.9 mH Li = 0 mH
IM 01C50G01-01EN
<2. Notes on Handling> 2-32
Control Drawing for FM (Canada) Division 2 installation (Fieldbus type)
+ +
− −
See Note 6
Model YTAxxx – F or – G
Temperature Transmitter
Model YTAxxx – F or – G
Sensor Input: Supply/Output:
Uo = 6.0 V Ui = 32 V
Io = 90 mA Ci = 2.2 nF
Po = 135 mW Li = 0 mH
Co = 10 μF
Lo = 3.9 mH
IM 01C50G01-01EN
<2. Notes on Handling> 2-33
Control Drawings for FM (Canada) intrinsically safe approval/non-incendive approval
(4 - 20 mA & Fieldbus type)
IM 01C50G01-01EN
<2. Notes on Handling> 2-34
2.8 EMC Conformity Standards 2.10 EU RoHS Directive
EN61326-1 Class A, Table 2 Applicable standard: EN 50581
EN61326-2-3
Applicable production sites is shown below.
EN61326-2-5 (for Fieldbus)
The production sites of the RoHS compliant product
Immunity influence during the test:
are confirmed by the serial number shown in the
Output shift is specified within ±1% of full span.
frame of “NO.” in the name plate of the product.
Serial numbers (9 letters): NNYMnnnnn
CAUTION NN: Identification code of production site
This instrument is a Class A product, and it is Use “C2, U1, BH, Y3 or S5”
designed for use in the industrial environment. Y: Year of production
Please use this instrument in the industrial 2015: Use “R” 2016: Use “S” 2017: Use “T”
environment only. 2018: Use “U” 2019: Use “V”
M: Month of production
January to September: Use “1” to “9”
NOTE (January: 1, September: 9).
October: Use “A”. November: Use “B”.
YOKOGAWA recommends customer to apply December: Use “C”.
the Metal Conduit Wiring or to use the twisted nnnnn: 5-digit number assigned sequentially in
pair Shield Cable for signal wiring to conform the each production date by the production
requirement of EMC Regulation, when customer site.
installs the YTA Transmitter to the plant.
IM 01C50G01-01EN
<3. Part Names and Functions> 3-1
MAIN assembly
Terminal cover
Stud bolt
Stud bolt
Indicator assembly
Grounding
Nut terminal
Amplifer cover Tag plate
Lock screw
(for ATEX and IECEx
(HART/BRAIN)
flameproof type)
Lightning protector
F0301.ai
IM 01C50G01-01EN
<3. Part Names and Functions> 3-2
The temperature transmitter is equipped with a 3.3 Integral Indicator Display
hardware error burnout function used to set the
output direction upon hardware error, and a sensor
Function
burnout function that sets the direction of the output
(1) Integral Indicator Display When Powering
in the event of burnout of the temperature sensor.
On
When factory-shipped under standard specification
or suffix code /C3, the output of both hardware error
burnout and sensor burnout are set to HIGH, but
if suffix code /C1 or /C2 is specified, the hardware
error burnout is set to LOW (-5%) output, and
sensor burnout is set to LOW (-2.5%) output,
respectively. The setting of the direction of output All segments display
from burnout can be changed.
To change the direction of output arising from
burnout, set the swich on the MAIN assembly (see
Figure 3.1 and Table 3.1). To change the direction
of output arising out of sensor burnout, a dedicated
hand-held terminal is required to rewrite the
Model name
parameters within the transmitter.
For details, refer to the separate instruction manual,
IM 01C50T01-02EN “HART Protocol” or IM
01C50T03-02EN “BRAIN Protocol”.
NOTE
1. Turn off the power supply before changing Communication Protocol Communication Protocol
(HART or FF) (BRAIN)
the switches
2. To change the switches, it is necessary to
remove the integral indicator assembly.
Refer to “ 6.3.1 Replacement of Integral
Indicator” about the procedures.
Table 3.1 Burnout Direction and Hardware Write Device revision (HART or FF)
Protect Swich
Burnout direction
SW1 SW1
(BOUT) and
hardware write 1 O BOUT 1 O BOUT
protect (WP) N N
2 WP 2 WP
switch position
Hardware error
HIGH LOW
burnout direction
Hardware error 110% or more -5% or less Software revision
burnout output (21.6 mA DC) (3.2 mA DC)
Set to HIGH Process variable display
when standard Set to LOW when F0302.ai
Remark specification or suffix code /C1 or
suffix code /C3 is /C2 is provided
provided
Hardware write OFF ON
protect swich Write enabled Write disabled
IM 01C50G01-01EN
<3. Part Names and Functions> 3-3
(2) Process Variable Display
IMPORTANT
Process variables that can be displayed in YTA
are shown in the Table 3.2. A cycle of up to four • Do not turn off the power to the temperature
displays can be shown by assigning variables to the transmitter immediately after performing
parameters. Indicates values of process variables parameter setting. Powering off within 30
with the indication limits –99999 to 99999. seconds of performing this procedure will
return the parameter to its previous setting.
• LCD update will be slower at low ambient
temperature, and it is recommended to use
LPS function at temperatures above −10
degrees C.
F0303.ai
• To implement local parameter settings, it
is necessary to turn off the software Write
Table 3.2 Process Variable Display protect and the hardware write protect switch
Process variable HART BRAIN FF on the MAIN assembly.
Sensor1 ─
Sensor1 - Terminal ─
Terminal ─
3.4.1 Local Parameter Setting (LPS)
Sensor2 ─ Overview
Sensor2 - Terminal ─ Parameter configuration by the 3 push button
Sensor1 - Sensor2 ─ on the integral indicator offers easy and quick
Sensor2 - Sensor1 ─ setup for parameters of Tag number, Unit, PV
Sensor Average ─ Damping, Display out 1, and etc. There is no
Sensor Backup ─ effect on measurement signal (analog output or
PV ─ communication signal) when Local Parameter
SV ─
Setting is carried out.
TV ─
QV ─ Table 3.3 Action
% of RANG ─ Action Operation
mA of RANGE ─ Activate Push ▲ or ▼ button
AI1 ─ ─ Move Push ▲ or ▼ button
AI2 ─ ─ Edit Push SET button
AI3 ─ ─ Save After parameter setting → Push SET
AI4 ─ ─ button → “SAVE?” → Push SET button →
“SAVED”
If “FAILED” appear, retry or check the
specificasions.
3.4 Local Parameter Setting Cancel After parameter setting → Push SET
button → “SAVE?” → Push ▲ or ▼ button
→ “CANCL?” → Push SET button →
WARNING “CANCLD”
Abort Hold down the SET button for over 2
The local push button on the integral indicator seconds → “ABORT” and move to the
must not be used in a hazardous area. When it is process measurement display
necessary to use the push button, operate it in a Exit Push ▲ button (When the first parameter is
selected)
non- hazardous location. or
Push ▼ button (When the last parameter is
selected)
Time out no operation for 10 minutes
IM 01C50G01-01EN
<3. Part Names and Functions> 3-4
Table 3.4 Parameters List (HART)
Write Mode: RW=read/write, R=read only
Item Indicator Display Write Mode Setting Type Remarks
Tag number TAG RW Character up to 8 characters
Long tag number LNG.TAG RW Character up to 32 characters
PV unit PV.UNIT RW Selection K, °C, °F, °R, mV, ohm, mA, %,
NOUNIT
PV damping time PV.DAMP RW Numeric 0.00 to 100.00 seconds
constant
Sensor 1 type S1.TYPE RW Selection mv, ohm, Pt100, JPt100, Pt200,
Pt500, Pt1000, Cu10, Ni120, TYPE.B,
TYPE.E, TYPE.J, TYPE.K, TYPE.N,
TYPE.R, TYPE.S, TYPE.T, TYPE.L,
TYPE.U, TYPE.W3, TYPE.C, USR.
TBL, NO.CNCT, S.MATCH
Sensor 1 wire S1.WIRE RW Selection 2, 3, 4
Sensor 2 type S2.TYPE RW Selection same as sensor1 type
Sensor 2 wire S2.WIRE RW Selection same as sensor1 wire
PV lower range PV LRV RW Numeric
PV upper range PV URV RW Numeric
Sensor burnout BUN.DIR RW Selection HIGH, LOW, USER, OFF
direction
Sensor burnout value BUN mA RW Numeric 3.6 to 21.6 mA
(mA)
Sensor burnout value BUN % RW Numeric -2.5 to 110%
(%)
Display out 1 DISP.1 RW Selection SENS.1, S.1-TER., TERM, SENS.2,
S.2 - TER., S.1 - S.2, S2 - S.1, AVG,
BACKUP, PV, SV, TV, QV, OUT %,
OUT.mA
Write protect WRT.PRT RW Selection, ON, OFF, Up to 8 Characters
Character
Model MODEL R ─
HART revision HART R ─
Device revision DEV.REV R ─
Software revision SW.REV R ─
IM 01C50G01-01EN
<3. Part Names and Functions> 3-5
Table 3.6 Parameters List (BRAIN)
Write Mode: RW=read/write, R=read only
Item Indicator Display Write Mode Setting Type Remarks
Tag number TAG RW Character up to 16 characters
PV unit PV.UNIT RW Selection K, °C, °F, °R, mV, ohms, mA, %,
NOUNIT
PV damping time PV.DAMP RW Selection 0,1,2,...,100 seconds
constant
Sensor 1 type S1.TYPE RW Selection TYPE.B, TYPE.E, TYPE.J, TYPE.K,
TYPE.N, TYPE.R, TYPE.S, TYPE.T,
TYPE.C, TYPE.W3, TYPE.L, TYPE.U,
Pt100, Pt200, Pt500, Pt1000, JPt100,
Ni120, Cu10, S.MATCH, ohms, mV,
NO.CNCT
Sensor 1 wire S1.WIRE RW Selection 2, 3, 4
Sensor 2 type S2.TYPE RW Selection same as sensor1 type
Sensor 2 wire S2.WIRE RW Selection same as sensor1 wire
PV lower range PV LRV RW Numeric
PV upper range PV URV RW Numeric
Sensor burnout BUN.DIR RW Selection HIGH, LOW, USER, OFF
direction
Sensor burnout value BUN mA RW Numeric 3.6 to 21.6 mA
(mA)
Sensor burnout value BUN % RW Numeric -2.5 to 110%
(%)
Display out 1 DISP.1 RW Selection PV, SV, TV, QV
Write protect WRT.PRT RW Selection, ON, OFF, Up to 8 Characters
Character
Model MODEL R ─
Software revision SW.REV R ─
IM 01C50G01-01EN
<3. Part Names and Functions> 3-6
3.4.2 Parameters Configuration (6) Selection, Character Configuration
Select the Selection Character parameter to display
(1) Activating Local Parameter Setting
the current status.
Push the ▲ or ▼ button on the integral indicator Press the SET button to enter the character
to activate the local parameter setting mode. The configuration.
transmitter will exit automatically from the local See 3. Character Configuration.
parameter setting mode if no operation is carried
(7) Parameter Setting Lock
out for 10 minutes.
To disable parameter changes by the local
(2) Parameter Setting Review
parameter setting there are two different ways.
▼As you press the button, you will be shown in the • Communication parameter write protect = On
order of the Parameter list in each communication • Hardware write protection switch on MAIN
table. assembly = ON
Press ▲ to back to previous Parameter. Reviewing local parameter setting by push button
Press ▲ on the first Parameter or ▼ on the last on the integral indicator is available at any time
Parameter to back to the process value display even when the local parameter setting is locked.
screen.
(3) Character Configuration
Character parameter → Push SET button →
Change the first character by pushing ▲/▼ button
→ Push SET button to go to the second character
→ Change the second character by pushing ▲/▼
button → Set all other characters in the same way
→ Hold down the SET button → “SAVE?” → Push
SET button → “SAVED”
(4) Selection Configuration
Selection parameter → Push SET button → Use
▲/▼ button to select → Push SET button →
“SAVE?” → Push SET button → “SAVED”
(5) Numeric Configuration
Numeric parameter → Push SET button → Change
the first digit by pushing ▲/▼ button → Push SET
button to go to the second digit → Change the
second figure by pushing ▲/▼ button → Set all
other digits in the same way → Hold down the SET
button → “SAVE?” → Push SET button → “SAVED”
Available numbers
Number
Selection Remarks
of digits
1 0, 1, 2, 3, 4, 5, 6, Determine plus and minus
7, 8, 9, -9, -8, -7, in the first digit. Return
-6, -5, -4, -3, -2, cannot be selected. In
-1, -0 case of integer a minus
cannot be selected.
2 to 5 0, 1, 2, 3, 4, 5, 6, A dot uses a one digit.
7, 8, 9, Dot(.), r* Two dots cannot use.
In case of integer a dot
cannot be selected.
6 0, 1, 2, 3, 4, 5, 6,
7, 8, 9, r*
*: Press the SET button at the time of r display, one digit will
return.
IM 01C50G01-01EN
<4. Installation> 4-1
4. Installation
• For details of choosing the installation location,
IMPORTANT refer to the guidelines outlined in Section 2.4,
• When performing on-site pipe fitting work that “Choosing the installation location”.
involves welding, use care to prevent outflow • The mounting bracket shown in Figure 4.1 is
of the welding current into the transmitter. used for the transmitter and is installed on 50A
• Do not use the transmitter as a foothold for (2B) pipe.
installation. It can be installed either on a horizontal pipe
and a vertical pipe or on a wall.
• To install the mounting bracket on the
transmitter, torque the transmitter lock screw to
about 20 to 30N•m.
U-bolt nut
Horizontal pipe
mounting bracket
Spring washer
Transmitter
fastening bolt
U-bolt
Bracket
fastening bolt
U-bolt nut
Spring washer
Bracket
U-bolt fastening nut
F0401.ai
IM 01C50G01-01EN
<5. Wiring> 5-1
5. Wiring
5.1 Notes on Wiring 5.2 Loop Construction
The YTA temperature transmitter is a two-wire
IMPORTANT temperature transmitter that uses the output power
• Apply a waterproofing sealant to the threads supply wiring and signal wiring alternately.
of the connection port. (It is recommended The transmission loop requires DC power. Connect
that you use non-hardening sealant made of the transmitter with the distributor as shown in
silicon resin for waterproofing.) Figure 5.1.
• Lay wiring as far away as possible from
electrical noise sources such as large For the transmission loop, the load resistance of
transformers, motors and power supplies. the distributor or other instrument to be installed in
• Remove the wiring connection dust-caps the loop and the lead wire must be within the range
before wiring. shown in Figure 5.2.
• To prevent electrical noise, the signal cable For details of communication requirements, refer to
and the power cable must not be housed in the additional reference materials, IM 01C50T01-
the same conduit. 02EN “YTA610 and YTA710 Temperature
• The terminal box cover is locked by an Allen Transmitter (HART Protocol)” and IM 01C50T03-
head bolt (a shrouding bolt) on ATEX and 02EN “YTA710 Temperature Transmitter Functions
IECEx flameproof type transmitters. (BRAIN Protocol)” .
When the shrouding bolt is driven clockwise
<Hazardous location> <Nonhazardous location>
by an Allen wrench, it is going in and cover
Input signal
lock is released, and then the cove can (thermocouple,
Distributor
be opened by hands. See Subsection 6.3 RTD, mV, etc.)
(power supply unit) Receiver
“Disassembly and Assembly” for details. +
–
Output signal
F0501.ai
600
IM 01C50G01-01EN
<5. Wiring> 5-2
5.3 Cable Selection 5.4 Cable and Terminal
5.3.1 Input signal Cable Selection
Connections
A dedicated cable is used for connection between 5.4.1 Input Terminal Connections
the temperature sensor and the temperature
transmitter. NOTE
When a thermocouple is used as the temperature
sensor, a compensation wire must be used that it Turn off the power when installing the sensor.
appropriate for the type of thermocouple (refer to Please make sure that the sensor will not affect
compensating cables for JIS C 1610/IEC60584-3 the host system in case not turning off the power.
thermocouples). When a RTD is used as the
temperature sensor, 2-core/3-core/4-core cable
must be used (refer to JIS C 1604/IEC60751). The NOTE
terminal of the dedicated cable is a 4 mm screw. It is recommended that the terminals be
connected in the order of STEP 1 and STEP 2.
5.3.2 Output Signal Cable Selection
• With regard to the type of wire to be used
for wiring, use twisted wires or cables with CAUTION
performance equivalent of 600V vinyl insulated
cable (JIS C3307). When wiring, pay attention not to damage the
• For wiring in areas susceptible to electrical cable and cores. All the cores of the cable must
noise, use shielded wires. have the sufficient insulation around them.
• For wiring in high or low temperature areas, use
wires or cables suitable for such temperatures. STEP 1
• For use in an atmosphere where harmful gases (1)
or liquids, oil, or solvents are present, use wires
or cables made of materials resistant to those
substances.
• It is recommended that a self-sealing terminal
with insulation sleeve (4-mm screw) be used for
lead wire ends.
STEP 2
(2)
IM 01C50G01-01EN
<5. Wiring> 5-3
The temperature sensor is to be 5.4.2 Output Terminal Connection
connected as shown in Figures 5.5.
(1) Connection of output signal/power supply
cable
Connect the output signal cable (shared with the
power supply cable) to the – terminal and the +
terminal. For details, refer to Figure 5.1, “Loop
construction”.
4
5 (+)
IM 01C50G01-01EN
<5. Wiring> 5-4
5.5 Wiring Cautions 5.6 Grounding
Grounding is always required for the proper
(1) General-use Type and Intrinsically Safe
operation of transmitters. Follow the domestic
Type
electrical requirements as regulated in each
Use metal conduit wiring or a waterproof gland country. For a transmitter with a lightning protector,
(metal wiring conduit JIS F 8801) for cable wiring. grounding should satisfy ground resistance of 10Ω
• Apply nonhardening sealant to the threads of or less.
the wiring tap and a flexible fitting for secure Ground terminals are located on the inside and
waterproofing. Figure 5.8 shows an example outside of the terminal box. Either of these terminals
of wiring on the output side. This example also may be used.
applies to the wiring on the input side.
Flexible fitting
CAUTION
Wiring conduit
To use an external arrester, carry out the
interlocked grounding as shown below, and
perform grounding work (ground resistance: 10Ω
or less) in the arrester side.
Flameproof flexible
Figure 5.10 Grounding Terminal
Non-hazardous
metal conduit area
Flameproof
heavy-gauge
steel conduit
Apply a nonhardening
sealant to the threads
of these fittings for Tee
waterproofing
Drain plug
Seal fitting
After wiring, impregnate the fitting
with a compound to seal tubing.
F0509.ai
IM 01C50G01-01EN
<6. Maintenance> 6-1
6. Maintenance
6.1 General 6.2 Calibration
Each component of this instrument is configured in This instrument is fully factory-tested and is
units to make maintenance easier. guaranteed for the intended accuracy, eliminating
the need for calibration. When calibration needs to
This chapter contains disassembly and assembly
be varified, the following equipment and calibration
procedures associated with calibration, adjustment
procedure is recommended.
and part replacement required for maintenance of
the affected instrument.
6.2.1 Selection of Equipment for
Calibration
IMPORTANT
Table 6.1 lists the equipment required for
1. Maintenance of this instrument should be calibration. The calibration equipment traceable to a
performed in a service shop where the verifying agency standard should be used.
necessary tools are provided.
2. Handling the MAIN and Indicator assembly Table 6.1 Calibration Equipment List
Some of the parts contained in the MAIN Name Recommended Remark
and Indicator assembly are susceptible to Power SDBT, SDBS 4 to 20mA DC
static electricity damage. Before performing supply distributor (Output voltage:
26.5±1.5V DC, drop
maintenance, use a ground wrist band by internal 250Ω
or other antistatic measures, and avoid resistance included)
touching the electronic components and Load 2792 standard For 4 to 20mA DC
circuits with bare hands. resistance resistor
(250Ω ±0.005%)
Voltmeter For 4 to 20mA DC
signal
Universal For calibration of
calibrator DC voltage and
thermocouple
Variable 279301 6-dial For calibration of
resistor variable resistor RTD input
(accuracy: ±(0.01%
of rdg + 2mΩ))
IM 01C50G01-01EN
<6. Maintenance> 6-2
6.2.2 Calibration Procedure 4. RTD
Using a RTD as input, calibration of the
To conduct calibration required to evaluate the
temperature transmitter is carried out via a
uncertainty while using the instrument, follow the
4-core wire connection.
steps below:
As defined the reference resistor value
1. In accordance with the example wiring shown in table of the RTD, obtain resistance values
Figure 6.1, connect each equipment, and warm corresponding to 0, 25, 50, 75 or 100% of the
up for 3 minutes or more. Lay wiring on the span, and use the obtained resistance as the
input side according to the sensor to be used. input value, then deliver it to the temperature
transmitter by means of a variable resistor.
a. Wiring of power supply and output
Measure the resulting output signal with the
+ Output signal
voltmeter (digital multimeter) and check the
– Load output value relative to the input value.
resistance
5. In Steps 2 through 4, if the output signal
deviates from the given range of accuracy
when a given input signal is delivered, adjust
Voltmeter
the output using the handheld terminal. For
b. Example of wiring for thermocouple or DC voltage input
details of how to adjust the output, refer to the
(when 1 input type is used)
additional reference, “HART Protocol”
1 IM 01C50T01-02EN, or “BRAIN Protocol”
2 (+)
3 (–) IM 01C50T03-02EN and the instruction manual
4 for each terminal.
5 DC voltage generator
IM 01C50G01-01EN
<6. Maintenance> 6-3
6.3.1 Replacement of Integral Indicator
CAUTION
Removal of integral indicator
Precautions for ATEX and IECEx Flameproof
1. Remove the cover.
Type Transmitters
2. Remove two nuts while using your hand to
• For a withstand flameproof type transmitter, support the integral indicator.
as a rule, move the transmitter to a non- 3. Remove the indicator assembly from the
hazardous location, then proceed with MAIN assembly. At this time, straighten and
maintenance and restore the instrument to pull the indicator assembly forward so that the
the original condition. connector connecting the MAIN assembly and
• For a withstand ATEX and IECEx flameproof the indicator assembly is not damaged.
type transmitter, turn the lock bolt (hexagon
Mounting the Integral indicator
socket bolt) clockwise with a wrench for
hexagon head, unlock and remove the cover. Integral Indicator can be installed in the following
When installing the cover, it is the must to three directions.
turn the lock bolt counterclockwise and lock
the cover (locked to a torque of 0.7 Nm).
• For a withstand flameproof type transmitter,
in no case should the user be allowed to
modify the transmitter. Therefore, no user
is allowed to add a integral indicator, or use
the transmitter with the indicator removed.
Contact us for any modification.
Terminal cover
TEMP assembly
MAIN assembly
Indicator assembly
Amplifer cover
Lock screw
(for ATEX and IECEx
flameproof type)
Stud bolt
Nut
F0602.ai F0603.ai
IM 01C50G01-01EN
<6. Maintenance> 6-4
6.4 Troubleshooting 6.4.2 Example of Troubleshooting Flow
When the measured value is found abnormal, The following phenomena indicate that this
follow the troubleshooting flowchart below. If the instrument may be out of operation.
complex nature of the trouble means that the cause [Example]
• No output signal is delivered.
cannot be identified using the following flowchart, • Process variable changes but the output
refer the matter to our service personnel. signal remains unchanged.
• The assessed value of the process variable
and the output are not coincident.
6.4.1 Basic Troubleshooting Flow
When the process measurement is found to be
• If a integral indicator is attached, check the
abnormal, it is necessary to determine whether display of the error code.
the input temperature is out of range, the sensor • Connect a hand-held terminal and check
has failed or being damaged, or the unit has self-diagnosis.
In these troubleshooting steps, the self diagnostic NO Refer to the error code list and
function provides helpful solutions to the problem, check for recovery measures.
refer to the instructions in Section 6.5 for details.
: Part supported
by self-diagnosis Is the polarity NO
of the power supply
correct?
Measured value
is found faulty YES Check the polarity between the
power supply and terminal box
and correct it.
YES Error in process
variable?
Error in measurement Are the power
NO NO
Inspect the process system supply voltage and load
Faulty resistance correct?
area in measurement
system
YES Refer to Section 5.2 and set
the specified voltage and load
resistance.
YES
Receiver error
Is the sensor NO
Inspect receiver NO correctly connected?
IM 01C50G01-01EN
<6. Maintenance> 6-5
Table 6.3 Problems and Causes
Observed Related Parameter Related Parameter Related Parameter
Possible Cause
Problems (HART) (FF) (BRAIN)
Output fluctuates Span is too narrow. PV LRV ─ E10:PV LRV
greatly. PV URV E11:PV URV
Input adjustment by user reset Sensor1(2) Sensor1 Trim I16:S1 ADJ CLR
was not corrctly done. Trim Sensor2 Trim I26:S2 ADJ CLR
Output adjustment by user reset AO Trim ─ I33:OUT ADJ CLR
was not correctly done.
Transmitter The transmitter is in exec Loop Test SIM_ENABLE_MSG F10:OUTPUT MODE
outputs fixed manual (test output) enable Dev Var Sim I30:OUTPUT
current. mode.
Output adjustment by user reset AO Trim ─ I33:OUT ADJ CLR
was not correctly done.
Output is reversed. LRV is greater than URV. PV LRV ─ E10:PV LRV
(See note 1) PV URV E11:PV URV
Parameters cannot The transmitter is in write Write Protect WRITE_LOCK G40:WRT PROTECT
be changed. protect status. G41:WRT ENABLE
Sensor backup Configuration of Sensor1 Sns1(2) Probe Type SENSOR_TYPE_1(2) D10:SENSOR1 TYPE
function doesn’t and Sensor2 is not Sns1(2) Wire SENSOR_ D11:SENSOR1 WIRE
work correctly. correct. Status group2 Mask CONNECTION_1(2) D30:SENSOR2 TYPE
Status group3 Mask SENSOR_STATUS_ D31:SENSOR2 WIRE
MASK_3 K10:S1 FAIL MASK
SENSOR_STATUS_ K11:S2 FAIL MASK
MASK_4 K12:S1 SHRT MASK
K13:S2 SHRT MASK
K23:BKUP S1 MASK
K24:BKUP S2 MASK
Sensor backup mode is PV is BACKUP_VALUE B10:PV is
not enabled.
Output damping Damping time constant is AO Damping PV_FTIME E20:AO DAMP
doesn’t work. set to “0 second.”
Note 1: If the reversed output is desired and necessary setting was done by user, it is not considered as a problem.
IM 01C50G01-01EN
<6. Maintenance> 6-6
6.5 Integral Indicator and Error Display
For temperature transmitters equipped with an integral indicator, errors in the temperature sensor or the
transmitter cause an integral indicator to call up the applicable error code. Table 6.5 lists the error codes for
HART and BRAIN. Table 6.7 lists the error codes for Foundation fieldbus.
Table 6.5 List of Error Codes (HART and BRAIN)
Alarm Indicator
Cause Output operation during error
Number Message
AL.00 CPU.ERR MAIN CPU failed According to the transmitter failure
output (burnout)
Communacation disabled
AL.01 SENSOR Sensor non-volatile memory verifies alarm According to the transmitter failure
AL.02 TMP.MEM Non-volatile memory of the TEMP ASSY verify alarm output (burnout)
AL.03 AD.CONV Input circuit hardware failed Communication enabled
AL.04*3 CAL.ERR MAIN ASSY memory failed
AL.05 CAL.ERR TEMP ASSY memory failed
AL.06 TMP.ERR TEMP ASSY voltage failed
AL.07 COM.EEP Communication non-volatile memory verifies alarm
AL.08 TMP.MEM Non-volatile memory of the TEMP ASSY verifies Continue to operate and output
alarm
AL.09 COM.ERR Internal communication failed According to the transmitter failure
output (burnout)
Communication enabled
AL.10 S.1.FAIL Sensor 1 failed or disconnected from terminal block Refar table 6.6
AL.11 S.2.FAIL Sensor 2 failed or disconnected from terminal block Refar table 6.6
AL.12*1 S.1.SHRT Sensor 1 short-circuited Refar table 6.6
AL.13*1 S.2.SHRT Sensor 2 short-circuited Refar table 6.6
AL.14*1 S.1.CORR Sensor 1 corroded Continue to operate and output
AL.15*1 S.2.CORR Sensor 2 corroded Continue to operate and output
AL.20 S.1.SGNL Sensor 1 input is out of measurable range. Continue to operate and output
AL.21 S.2.SGNL Sensor 2 input is out of measurable range. Continue to operate and output
AL.22*4 TERMNL Terminal block temperature is abnormal. Or terminal Refar table 6.6
block temperature sensor failed
AL.23 S.1.FAIL During sensor backup operation, Sensor1 fails, it Operating to the backup side.
has output Sensor2 When the backup side also fails,
output is according to burnout setting.
AL.24 S.2.FAIL During sensor backup operation, Sensor2 fails Continue to operate and output
AL.25 DRIFT Sensor drift Continue to operate and output
AL.26*1 S.1.CYCL Temperature cycling times of Sensor1 exceeds the Continue to operate and output
threshold
AL.27*1 S.2.CYCL Temperature cycling times of Sensor2 exceeds the Continue to operate and output
threshold
AL.30 PV LO PV value is below the range limit setting Lower limit 3.68mA (-2%)
AL.31 PV HI PV value is above the range limit setting Upper limit 20.8mA (105%)
AL.40 S.1 LO Measured temperature of sensor 1 is too low Continue to operate and output
AL.41 S.1 HI Measured temperature of sensor 1 is too high Continue to operate and output
AL.42 S.2 LO Measured temperature of sensor 2 is too low Continue to operate and output
AL.43 S.2 HI Measured temperature of sensor 2 is too high Continue to operate and output
AL.44 AMBNT.L Ambient temperature is below-40 degree C Continue to operate and output
AL.45 AMBNT.H Ambient temperature is above 85 degree C Continue to operate and output
AL.50 LRV LO LRV setting is below the sensor operating Continue to operate and output
temperature range
IM 01C50G01-01EN
<6. Maintenance> 6-7
Alarm Indicator
Cause Output operation during error
Number Message
AL.51 LRV HI LRV setting is above the sensor operating Continue to operate and output
temperature range
AL.52 URV LO URV setting is below the sensor operating Continue to operate and output
temperature range
AL.53 URV HI URV setting is above the sensor operating Continue to operate and output
temperature range
AL.54 SPAN.LO It is set below recommended minimum span Continue to operate and output
AL.60 PV.CFG There is a setting error in the sensor that is mapped Hold the output of the previous error
to the PV When it occurs at startup, hold at
4mA
AL.61*2 S.1 CFG There is a false set to sensor1 Continue to operate and output
AL.62*2 S.2 CFG There is a false set to sensor2 Continue to operate and output
*1: Applicable only for YTA710.
*2: Applicable only for HART.
*3: In software revision HART R1.03.01 or earlier or BRAIN R1.01.01, AL04 may be generated even when abnormality or
disconnection of the terminal block temperature sensor occurs.
*4: In software revision HART R1.03.01 or earlier or BRAIN R1.01.01, even if abnormality or disconnection of the terminal block
temperature sensor occurs, AL22 may not be output and AL04 may be generated.
S.2-S.1 Sensor Burnout Sensor Burnout Sensor Burnout Sensor Burnout *1*4
AVG Sensor Burnout Sensor Burnout Sensor Burnout Sensor Burnout *1*4
BACKUP *2 *2 *2 *2 *1*4
IM 01C50G01-01EN
<6. Maintenance> 6-8
Table 6.7 List of Error Codes (FF)
Alarm Indicator
Cause
Number Message
AL.00 CPU.ERR MAIN CPU failed
AL.01 SENSOR Sensor non-volatile memory verifies alarm
AL.02 TMP.MEM Non-volatile memory of the TEMP ASSY verifies alarm
AL.03 AD.CONV Input circuit hardware failed
AL.04 CAL.ERR MAIN ASSY memory failed
AL.05 CAL.ERR TEMP ASSY memory failed
AL.06 TMP.ERR TEMP ASSY voltage failed
AL.07 COM.EEP Communication non-volatile memory verifies alarm
AL.08 TMP.MEM Non-volatile memory of the TEMP ASSY verifies alarm
AL.09 COM.ERR Internal communication failed
AL.10 S.1.FAIL Sensor 1 failed or disconnected from terminal block
AL.11 S.2.FAIL Sensor 2 failed or disconnected from terminal block
AL.12*1 S.1.SHRT Sensor 1 short-circuited
AL.13*1 S.2.SHRT Sensor 2 short-circuited
AL.14*1 S.1.CORR Sensor 1 corroded
AL.15*1 S.2.CORR Sensor 2 corroded
AL.20 S.1.SGNL Sensor 1 input is out of measurable range.
AL.21 S.2.SGNL Sensor 2 input is out of measurable range.
AL.22 TERMNL Terminal block temperature is abnormal. Such as abnormal or disconnection of the terminal
block temperature sensor
AL.23 S.1.FAIL During sensor backup operation, Sensor1 fails, it has output Sensor2
AL.24 S.2.FAIL During sensor backup operation, Sensor2 fails
AL.25 DRIFT Sensor drift
AL.26*1 S.1.CYCL Temperature cycling times of Sensor1 exceeds the threshold
AL.27*1 S.2.CYCL Temperature cycling times of Sensor2 exceeds the threshold
AL.40 S.1 LO Measured temperature of sensor 1 is to low
AL.41 S.1 HI Measured temperature of sensor 1 is to high
AL.42 S.2 LO Measured temperature of sensor 2 is to low
AL.43 S.2 HI Measured temperature of sensor 2 is to high
AL.44 AMBNT.L Ambient temperature is below-40 degree C
AL.45 AMBNT.H Ambient temperature is above 85 degree C
AL.61 S.1 CFG There is a false set to sensor1
AL.62 S.2 CFG There is a false set to sensor2
AL.100 NOT.RDY Any function block is not scheduled
AL.101 AI1 HH HI HI alarm occurs in AI1 block
AL.101 AI1 LL LO LO alarm occurs in AI1 block
AL.102 AI2 HH HI HI alarm occurs in AI2 block
AL.102 AI2 LL LO LO alarm occurs in AI2 block
AL.103 AI3 HH HI HI alarm occurs in AI3 block
AL.103 AI3 LL LO LO alarm occurs in AI3 block
AL.104 AI4 HH HI HI alarm occurs in AI4 block
AL.104 AI4 LL LO LO alarm occurs in AI4 block
AL.105 PID1.HH HI HI alarm occurs in PID1block
AL.105 PID1.LL LO LO alarm occurs in PID1 block
AL.106 PID2.HH HI HI alarm occurs in PID2 block
AL.106 PID2.LL LO LO alarm occurs in PID2 block
AL.110 RS O/S The actual mode of the RS block is O/S.
AL.111 STB O/S The actual mode of the STB block is O/S.
AL.112 LTB O/S The actual mode of the LTB block is O/S.
AL.113 MTB O/S The actual mode of the MTB block is O/S.
AL.114 AI1 O/S The actual mode of the AI1 block is O/S.
AL.115 AI2 O/S The actual mode of the AI2 block is O/S.
AL.116 AI3 O/S The actual mode of the AI3 block is O/S.
IM 01C50G01-01EN
<6. Maintenance> 6-9
Alarm Indicator
Cause
Number Message
AL.117 AI4 O/S The actual mode of the AI4 block is O/S.
AL.118 SCHEDL Execution of AI1 is not scheduled.
AL.119 SCHEDL Execution of AI2 is not scheduled.
AL.120 SCHEDL Execution of AI3 is not scheduled.
AL.121 SCHEDL Execution of AI4 is not scheduled.
AL.122 STB.MAN The actual mode of the STB block is Man.
AL.130 DI1 O/S The actual mode of the DI1 block is O/S.
AL.130 DI1.MAN The actual mode of the DI1 block is Man.
AL.130 SCHEDL Execution of DI1 is not scheduled.
AL.130 DI1.SIM Simulate of the DI1 block is active.
AL.131 DI2 O/S The actual mode of the DI2 block is O/S.
AL.131 DI2.MAN The actual mode of the DI2 block is Man.
AL.131 SCHEDL Execution of DI2 is not scheduled.
AL.131 DI2.SIM Simulate of the DI2 block is active.
AL.132 DI3 O/S The actual mode of the DI3 block is O/S.
AL.132 DI3.MAN The actual mode of the DI3 block is Man.
AL.132 SCHEDL Execution of DI3 is not scheduled.
AL.132 DI3.SIM Simulate of the DI3 block is active.
AL.133 DI4 O/S The actual mode of the DI4 block is O/S.
AL.133 DI4.MAN The actual mode of the DI4 block is Man.
AL.133 SCHEDL Execution of DI4 is not scheduled.
AL.133 DI4.SIM Simulate of the DI4 block is active.
AL.134 PID1.O/S The actual mode of the PID1 block is O/S.
AL.134 PID.MAN The actual mode of the PID1 block is Man.
AL.134 SCHEDL Execution of PID1 is not scheduled.
AL.134 PID.BYP The bypass action for PID1 is active.
AL.135 PID2.O/S The actual mode of the PID2 block is O/S.
AL.135 PID.MAN The actual mode of the PID2 block is Man.
AL.135 SCHEDL Execution of PID2 is not scheduled.
AL.135 PID.BYP The bypass action for PID2 is active.
AL.136 SC O/S The actual mode of the SC block is O/S.
AL.136 SC MAN The actual mode of the SC block is Man.
AL.136 SCHEDL Execution of SC is not scheduled.
AL.137 IS O/S The actual mode of the IS block is O/S.
AL.137 IS MAN The actual mode of the IS block is Man.
AL.137 SCHEDL Execution of IS is not scheduled.
AL.138 AR O/S The actual mode of the AR block is O/S.
AL.138 AR MAN The actual mode of the AR block is Man.
AL.138 SCHEDL Execution of AR is not scheduled.
AL.150 AI1.SIM Simulate of the AI1 block is active.
AL.151 AI2.SIM Simulate of the AI2 block is active.
AL.152 AI3.SIM Simulate of the AI3 block is active.
AL.153 AI4.SIM Simulate of the AI4 block is active.
AL.154 AI1.MAN The actual mode of the AI1 block is Man.
AL.155 AI2.MAN The actual mode of the AI2 block is Man.
AL.156 AI3.MAN The actual mode of the AI3 block is Man.
AL.157 AI4.MAN The actual mode of the AI4 block is Man.
*1: Applicable only for YTA710.
IM 01C50G01-01EN
<7. General Specifications> 7-1
7. General Specifications
Please refer to the following General Specifications list for the specifications, model, suffix and option codes,
and external dimensions of each product.
The General Specifications can be downloaded from the website of Yokogawa.
Website address: https://www.yokogawa.com/solutions/products-platforms/field-instruments/
IM 01C50G01-01EN
Rev-1
Revision Information
Title : YTA610 and YTA710 Temperature Transmitters (Hardware)
Manual No. : IM 01C50G01-01EN
IM 01C50G01-01EN
Rev-2
Edition Date Page Revised Item
4th Mar. 2018 2-5 Revise ATEX intrinsically safe approval
Add “Ex ic” of ATEX intrinsically safe approval 4-20mA type
2-8 Add “Ex ic” of IECEx intrinsically safe approval
Revise IECEx intrinsically safe approval
2-10 Revise FM (US) intrinsically safe approval/nonincendive
2-11 Revise FM (Canada) intrinsically safe approval/nonincendive approval
2-14 to 2-29 Revise Control Drawing
6-5 Add Table 6.4
7-1 to 7-4 Add BRAIN Type.
7-13 Add R1 Option and VE, VR Option.
7-14 Add Table 7.5
7-15 Revise ATEX
Add Ex ic
7-16 Revise IECEx
Add Ex ic
7-17 Revise FM (US)
7-18 Revise CSA, FM (Canada)
7-23 Add EAC (GF1, GS1, GS15)
5th June 2019 1-1 Add reference for functional safety
3-1 Add Nut to 3.PART
3-2 Delete (HART/BRAIN) Add FF
3-4, 3-5 Add Character and Selection.
3-6 Change Parameters Configuration
5-2 Add Note
6-5 Delete (HART/FF)
6-6,6-7 Correction of errors
7-1 to 7-13 Change Standard specification contents
6th Apr. 2020 2-4 to 2-7 Revise ATEX Certification
2-9 to 2-11 Revise IECEx Certification
2-12 to2-13 Revise FM Certification
2-14 to 2-15 Revise CSA Certification
2-17 to 2-19 Changed Control Drawing
2-27 Changed Control Drawing
2-32 Changed Control Drawing
2-33 Add EU RoHS Directive
7-1 Delete the description for general specifications and add the General
Specifications list.
IM 01C50G01-01EN