Learning Objectives within this challenge assignment are as follows:
• 1.1b Work with structural floors
• 1.1c Work with structural walls and wall types • 2.3 Create family content Video resources that may help with this challenge assignment are:
• 006 - Working with structural walls Part 1.mp4
• 008 - Working with structural floors Part 1.mp4 • 022 - Creating family content.mp4 In this challenge assignment, you use the wall or slab edge command to create a parapet around the western 3rd floor slab. The parapet could be modeled using a variety of differing methods. The parapet needs to have the following profile and dimensions and must be joined and monolithic with the floor.
Before selecting a modeling process, you must consider the following
requirements:
• If the floor’s boundary sketch is changed will your parapet update?
• Can the parapet profile be easily edited, perhaps the height or thickness? • Can the parapet host rebar? • If the model is to be used for structural analysis, does your parapet have an analytical model? Challenge Assignment 1
Open Challenge Exercise 01.rvt
The parapet should be added to the third-floor slab as shown in the image below