Professional Documents
Culture Documents
Pompa Verticala Tapflo Aturia - Product - Overview - Web - Romania
Pompa Verticala Tapflo Aturia - Product - Overview - Web - Romania
Tapflo Romania
Tapflo Group is one of the leading manufacturers of industrial pumps in Europe. With more than 30 years of working
experience with different types of pumps, we can be your reliable partner regarding the choosing, installation and main-
tenance of the industrial equipment. Tapflo Rom srl is a subsidiary company, branch office opened in Romania,
who is in charged for selling and distribution of pumps and accessorize for Romanian clients. We offer high quality
products, operational reliability, low cost maintenance and 24h technical consulting. Our premises are located near the
city center, so you can visit us any time in case you need additional information and support which pump is the perfect
choice for your specific application and industry.
Tapflo quality
The Tapflo pump is usually an essential part in the process with hazardous fluids. We always strive to supply the safest
and most environmental friendly solution for these fluids. As a part of our safety thinking, we are
in the frontline following important standards, guidelines and directives. Many of our products
comply with the EC ATEX directive for equipment in explosion hazardous environments. All our
pumps are of course CE marked and followed by our comprehensive instruction manuals. Tapflo
is an ISO 9001:2001 certified company. The EHEDG certification of our aseptic diaphragm pump
was achieved in 2009
Aturia began to operate in the Centrifugal Pumps sector in 1927 and became a leader in the
Submersible Electric Pumps field by patenting the Submersible Motor in 1946. In 1960 it extended its
markets to countries in the Mediterranean, America and Asia. Over time Aturia acquired four top Italian
companies: Rotos (1990), Marelli (1990), Audoli & Bertola (2003) and Aris Chiappa (2009).
Rotos was set up in 1919 and manufactured electrical motors, monobloc pumps, multistage pumps
and vertical pumps. In 1962 it entered French group GUINARD and became a development centre for
multistage pumps. Based on this experience, it started to produce pumps for the process industry (ISO
2858 and API 610). In 2005 it started to produce magnetic drive pumps in its plant based in glio di Po.
Founded in 1891, it began to manufacture electrical motors and centrifugal pumps in 1898.
The company was acquired by Aturia together with Rotos in 1990. Thanks to this acquisition, Gruppo
Aturia extended its range of products considerably by including GIEM and ITEM’s pumps (monobloc
pumps, split case pumps and large-capacity pumps).
The company started producing vertical pumps in 1890 and over the years it strengthened its presence
on the market in terms of applications for the heavy industry (steel plants, cooling systems, power plants
and the marine sector). Gruppo Aturia acquired Audoli & Bertola in 2003, thus improving its presence
in the industrial sector. Its office in Turin is currently a centre of excellence for fire-fighting systems
(NFPA20, FM).
G. Chiappa Fonderie was established in Turin in 1921 as a steel plant and started to manufacture
bronze, aluminium and cast iron casts. In 1940 it began to produce vertical pumps.
For over forty years, in partnership with the world’s top gas turbine manufacturers, it has been developing
pumps specifically designed for lubrication services.
2
Index
About Tapflo and Gruppo Aturia..........................................................................................2
Surface applications......................................................................................................................8
• Monobloc centrifugal pumpsets DIN 24255 - EN 733..................................................................9
• Monobloc centrifugal pumpsets ”IN LINE”.......................................................................................9
• Horizontal centrifugal single stage pumps DIN 24255 - EN 733..............................................10
• Centrifugal multistage radial pumps.................................................................................................10
• Horizontal centrifugal split case pumps, double suction.................................................................11
• Vertical turbine pumps........................................................................................................................11
Process applications....................................................................................................................12
• Process pumps API 610.....................................................................................................................13
• Multistage vertical pumps in barrel..................................................................................................15
• Single stage centrifugal pumps for aggressive liquids ISO 2858, ISO 5199.............................16
• Vertical single stage pumps ISO 2858............................................................................................16
• Metallic magnetic drive sealless centrifugal and turbine pumps...................................................17
• ELV/PEN propeller pumps ............................................................................19
Fire fighting..................................................................................................................................20
• Horizontal split case type centrifugal fire pumps............................................................................22
• Vertical shaft, turbine type centrifugal fire pumps...........................................................................23
3
Certified Quality System/Quality Control
Gruppo Aturia’s commitment to improve Quality has
been acknowledged by the Lloyd’s Register Group with
the “Quality System” certification.
4
Where do you use Gruppo Aturia pumps?
Gruppo Aturia pumps are some of the most versatile pumps on the market today. They can be used in a
variety of installations in numerous applications.
Various liquids
Gruppo Aturia pumps are compatible with a very wide range of liquids:
Water Civil
systems plants
Naval
Industrial
Mining plants
Off-shore Heating
infrastructures Air-conditioning
Industry
Chemical and
petrochemical
plants
Off-shore Off-shore
infrastructures infrastructures
On-shore
infrastructures
Refineries Energy
Civil and
industrial plants
5
Submersible
SUBMERSIBLE PUMPS
The installation of submersible electric pumps,
for more than 60 years, has allowed Gruppo
Aturia to acquire countless applied experiences
in practically all fields in which these pumps are
required. Submersible pumps, simply born to lift
well water, have first replaced deep well vertical
pumps. Through the use of different materials such
as bronze, cast stainless steel and Duplex they
are now successfully used in heavy applications
where a high reliability is required, such as Mine,
Off-Shore, Industry, Navy. The installation of
submersible pumps in suitable vertical or horizontal
cylindrical tanks allows silent- operating pressure
lifting systems in a more reduced space compared
to the traditional solutions with surface pumps.
In order to offer customers hydraulic characteristics
with best efficiency, the wide range of capacities
and heads is covered by over five hundred types
of submersible pumpsets.
In the last years, adopting a new design, Aturia
has introduced a range of motors suitable for hot
waters.
6
Submersible
submersible submersible
pumpsets rewindable
motors
CAST IRON BRONZE,
pumpsets stAINLESS
STEEL / DUPLEX
pumpsets
7
Surface
SURFACE APPLICATIONS
Gruppo Aturia offers a wide range of surface pumps
answering to the needs of manifold and important
productive fields. Monobloc pumps are used in
building such as water distribution systems, heating, air
conditioning.
Single stage and split case pumps are used in pumping
stations, Fire-Fighting service and industry for clean
water when large flows and limited heads are required.
Multistage pumps are used in pumping stations, as well
as for artificial snowing, for reverse osmosis and for more
sophisticated duties such as boiler feed. Vertical pumps
are used in recirculation systems for industrial water, in
power plants,in steel mills, in drainage systems and in
fish farming installations.
8
Surface
Construction Construction
Casing Cast Iron Casing Cast Iron
Impeller Cast Iron/Bronze/St.Steel Impeller Cast Iron/Bronze/St.Steel
Shaft Chromium Steel Shaft Chromium Steel
Seal Mechanical Seal Mechanical
Electric Motor IP55 - Class F Electric Motor IP55 - Class F
9
Surface
horizontal centrifugal centrifugal multistage
single stage pumps radial pumps
din 24255 - en 733
Construction Construction
Casing Cast Iron Cast Iron/ Nodular Cast Iron/
Casing
Impeller Cast Iron/Bronze/St.Steel Carbon Steel/St.Steel/Duplex
Shaft Steel Diffuser/
Cast Iron/Bronze/St.Steel/ Duplex
Seal Mechanical Impeller
Shaft Steel/St.Steel
10
Surface
Construction Construction
Cast Iron/ Nodular Cast Iron/Car- Cast Iron/ Nodular Cast Iron/Car-
Casing Casing
bon Steel/St.Steel/Duplex bon Steel/St.Steel/Duplex
m3/h
11
Process
PROCESS APPLICATIONS
ROTOS, thanks to the long experience gained working in the
“Guinard Group”, operates in fields characterized by extre-
mely heavy duties, requiring high-tech pumps according to
international standards foreseen for such applications. Pumps
manufactured in compliance with API 610, ISO 2858 and
ISO 5199 standards find their natural application in the most
important chemical and petrochemical installation as well
as in oil refineries. Magnetic Drive pumps, manufactured in
compliance with API 685 and ISO 2858 standards where
the utmost reliability and safety is required when pumping
dangerous chemical (inflammable, toxic) products. “Barrel
pump” versions are studied for an efficient pumping of liqui-
fied gases and volatile liquids. Other special fields such as
geothermy, reverse osmosis, off-shore, cryogenic fluids and so
on, will find in the ROTOS range the suitable pump to satisfy
any particular application need.
12
Process
TYPE OF SEALS
To get the perfect tightness, can be used different types of seals.
• Single mechanical seal
• Double mechanical seal
• Cartridge seal
• Packing by request
EASY MAINTENANCE
QUICK INSPECTION
The use of a spacer type coupling allows dismantling
of the pump without disconnecting the casing from the
base or from the piping. Easy acces to the seal. For
packing seal,the gland is in two parts, an arrange-
ment wich permits replacement of the packing rings
without dismantling the pump. Corrosion of the rota-
ting assambly is eliminatedbecause the shaft, impeller
key and screws are all made from stainless steel.
STANDARDIZATION OF COMPONENTS
For the wole range of these pumps, the number of
bearing houses, shafts and dtuffing boxes has been
standardized.This offers two advantages:
1° Spares facilityThe spares being common to seve-
ral types of pumps, spares stock may be reduced to a
bare minimum.
2° Easy modificationShould the user wish to modify
the pump characteristics or the seal only the corre-
sponding parts need to be ordered.
13
Process
SECTIONAL DRAWINGS
SMKM Single stage FGB – Barrel
• End Suction • Stuffing box vibration level to API
• Top Discharge 610
• Beaing house cooling • Sleeve protected shaft in bearing
areas
• Keyed impellers
• Impeller & Casing wearing rings
• Below mounting suction nozzle for
special applications
14
Process
Cast Iron/Bronze/St.Steel/
Impeller
Duplex
Shaft Alloyed Steel
Seal Mechanical
Barrel Steel
Notes Construction
Others material follow API 610
Available with ATEX Certification Casing St.Steel
Impeller St.Steel
Shaft Steel
Seal Mechanical
Notes
Others material follow API 610
Size [DN] 6” - 18” 6” - 28” Vertical barrel construction for low NPSH services
Available with ATEX Certification
Poles 2 4
Capacity [m3/h] up to 200 up to 1000
Size [DN] 1 1/2” - 14”
Head [m] up to 350 up to 250
Poles 2 4
Nom.Pressure [bar] 25/40
Capacity [m3/h] 8 - 1500 4 - 1300
Power [kW] up to 200 up to 350
Head [m] 10 - 350 5 - 130
Temperature [0С] -50/+200
Nom.Pressure [bar] 50
Power [kW] up to 1500 up to 700
Impeller Diam. [mm] up to 520 up to 610
Temperature [0С] -100/+450
15
Process
single stage centrifugal pumps vertical single stage pumps
for aggressive liquids iso 2858
iso 2858, iso 5199
Construction
Casing St.Steel/Duplex
Impeller St.Steel/Duplex
Shaft St.Steel
Seal Mechanical
Construction
Casing St.Steel/Duplex
Impeller St.Steel/Duplex
Shaft St.Steel
Seal Mechanical
Notes
Special Construction: Other Alloys Size [DN] 32 - 100 32 - 300
Available with Magnetic Drive Poles 2 4
Available with ATEX Certification
Capacity [m3/h] 5 - 330 3 - 1300
Size [DN] 32 - 100 32 - 300 Head [m] up to 140 up to 100
Poles 2 4 Nom.Pressure [bar] 16/20
Capacity [m3/h] 5 - 330 3 - 1300 Power [kW] up to 200 up to 200
Head [m] up to 140 up to 100 Impeller Diam. [mm] up to 315 up to 570
Nom.Pressure [bar] 16/20 Temperature [0С] -50/+200
Power [kW] up to 200 up to 315
Impeller Diam. [mm] up to 315 up to 570
Temperature [0С] -50/+200
16
Process
In addition ROTOS produces custom engineered models for the most demanding applications:
SPECIAL EXECUTIONS
Seal-less Vertical Pumps, ensure leak-proof handling of cor- END SUCTION API 685 Seal-leas Pumps, are designed to
rosives. The heavy duty shaft is supported by ball bearings meet critical nozzle loading and working pressure require-
without bushings to wear; shaft deflection is theeby eliminated. ments of API 685 standards.
FEATURES FEATURES
• Non-cantilevered shaft • Over designed pump casings and baseplates
• Hermetically sealed column • Heavy duty containment housing for optimum safety
• Heavy duty column shaft with oversized ball bearings • External lubrication systems maintains highest pressure
• Modular impeller allows for modifying performances differential; allowing fordeadheading and flw or pres-
• Compact, high torque magnetic coupling with reduced sure monitoring
mass • Dual back-pull-out (access hydraulic end or power
frame)
Seal-less Vertical Pumps, ensure leak-proof handling of cor-
rosives. The heavy duty shaft is supported by ball bearings SEAL-LESS MULTISTAGE BARREL API Pumps are built for
without bushings to wear; shaft deflection is theeby eliminated. reliable, leak-proof operation in high discharge head app-
PCMV Pumps are fabricated from solid thermoplastic material lications.
to resist internal or external corrosion. The hermetically sealed
column is permanently isolated from corrosive liquid or fumes. FEATURES
• Between bearings support with no overhung loads
FEATURES • Staggered volutes minimize residual radial loads
• Non-cantilevered shaft • Dynamically balanced, back-to-back impellers for
• Hermetically sealed column minimal axial load
• Heavy duty column shaft with oversized ball bearings • TOP-TOP Suction - Discharge
• Exclusive solid machined thermoplastic casing and • Heavy duty barrel casing
impeller components • Working temperature up to 250 °C
• Oversized, high purity ceramic thrust bearings and shaft • Flow up to 200 m3/h
• Modular impeller allows for modifying performances • Head up to 500 m
17
Process
metallic magnetic drive plastic magnetic drive
sealless centrifugal and turbine sealless centrifugal and turbine
pumps pumps
Construction Construction
Casing St.Steel Casing PP и PVDF
Impeller St.Steel Impeller PP и PVDF
Shaft St.Steel Shaft Alumina or Silicon Carbide
Bearing Silicon Carbide Bearing PTFEC or Silicon Carbide
Thrust Bearing Silicon Carbide
Thrust Bearing PTFEC or Silicon Carbide
Magnetic Drive CoSm
Magnetic Drive FeBNe
Notes
Available with ATEX Certification
Special Construction: Incoloy825-Hastelloy (C)
Available with ATEX Certification
Discharge nozzles 32 - 100 Discharge nozzles 32 - 80
Poles 2 4 Poles 2 4
Capacity [m3/h] 8 - 200 3 - 100 Capacity [m3/h] 1 - 100 1 - 60
Head [m] up to 90 up to 25 Head [m] 4 - 45 1 - 11
Nom.Pressure [bar] 16/25 Nom.Pressure [bar] 10/16
Max. Pressure [bar] 25 Max. Pressure [bar] 10
Temperature [0С] -50/+200 Temperature [0С] -40/+100
Max.Temperature [0С] 300 Max.Temperature [0С] 100
18
Process
Water scooping machines able to lift big quantities of fluid at low heads. The performance curves show
the difference between these units and the centrifugal types of pumps, i.e. high brake horse power at low
capacities.
Taking into consideration what said above, it is important not to install gate valves, valves or other instruments
on the delivery pipe to avoid the decrease of capacity and the consequent increase of pump brake horse
power with motor overloading when the valves are partially or totally closed.
Field of application
The capacity to pump big quantities of liquid at low heads allows the application of these pumps in various
services. The most important are:
They find also large application in the feeding of canals and transfer of fluvial or sea water. Capacities range
from 200 up to 30.000 m3/h against heads from 1 up to 8 meters at one stage, and up to 16 m at two stages.
Pump unit
The pump is composed by:
• Bowl.
• Column pipe.
• Discharge head with discharge elbow above or under
floor level, according to the requirements.
Bowl
The bowl is composed by:
• Suction bell.
• Propeller or blades mounted on the proper hub.
• Diffuser.
The propeller blades can rotate around their axis.
During mounting the blades can be positioned find locked
according to the required conditions of service. Pump sizes When handling clear or slightly loaded liquids, the guide
over ”ELV 600” can be manufactured for blades adjustment bearings in the column pipe are lubricated by the pumped
during pump running. This operation can be made manually liquid; in case of other special liquids our technical department
(by means of proper hand wheel) or automatically (by electric will propose the proper solution.
actuator). This advantage is considerable on plants where the
capacity is subject to big variations. Propeller pumps can be driven by:
• Directly coupled electric motor.
Column pipe • Electric motor through reduction gear.
The column pipe is composed by: • Diesel engine through right angle gear box.
• Conveying pipe.
• Shaft.
• Shaft bearing retainer.
Discharage head
The discharge head is composed by:
• Support frame.
• Discharge elbow: under or above floor level.
• Motor stool.
• Flexible coupling.
• Axial thrust supporting unit, including grease or oil lub-
ricated roller bearings:
19
Firefighting
Audoli&Bertola is the only European Pumps Manufacturer to have obtained from ”Factory
Mutual” the approval for:
- Vertical Turbine Pumps: from 500 GPM to 4000 GPM, at 50 and 60 Hz.
- Split-Case Pumps: from 750 GPM to 2000 GPM, at 50 and 60 Hz.
20
Firefighting
21
Firefighting
2 poles
PDN 150-300L 750-1000 USGPM
PDN 150-300M 1000-1250 USGPM
PDN 150-300H 1250-1500 USGPM
PDN 200-300M 2000 USGPM
4 poles
PDN 200-250B 1250-2000 USGPM
22
Firefighting
Vertical shaft, turbine type centrifugal fire pumps have submerged impellers
contained in a series-bowl assembly at the bottom of a vertical shaft. The de-
sign is similar to pumps used extensively for industrial and municipal service.
These pumps are FM Approved for discharging water from lakes, streams,
open sumps, drilled wells and other equivalent subsurface sources. Each pump
consists of a discharge head, motor stand, column pipe, line shaft, bowl as-
sembly and suction strainer. For electric drive, FM Approved pumps must be
used with a vertical, electric motor. For internal-combustion-engine drive, FM
Approved pumps must be connected to the FM Approved engine through an
FM Approved right-angle gear drive.
4 poles
VAB 152 500 - 750 USGPM
VAB 180 750 -1250 USGPM
VAB 200 1000 -1500 USGPM
VAB 250 1500 - 2500 USGPM
VAB 251 1500 - 2500 USGPM
VAB 302 2500 - 4000 USGPM
23
www.tapflo.ro
Tapflo Rom SRL
Drumul Fermei 81, 077160
Popesti-Leordeni, Ilfov, Romania
Tel: +40 21 345.12.55
Fax: +40 21 345.11.66
E-mail: office@tapflo.ro
sales@tapflo.ro
Bucuresti