Professional Documents
Culture Documents
E•1
E Residential enclosures Surface and flush mounting
Europe Line
Insulated enclosures
§ IP30
Features
– Masking frame, base and protective cover made from high
resistance material
– Metal door, powder coated, opens through 180°
– Cable entry from top, below, from side and from rear side
– Cable entry plate (top, bottom) removable for easy cable
mounting from front side
– Clamp relief possibility
– Sealing possible
– Label for circuit indification
Technical data
Standards DIN 43871 and
DIN VDE 0603 Part 1
Rated voltage up to 400V/50Hz
Rated current up to 63A
Degree of protection IP30
Protection class II (total isolation)
Type Dimensions [mm] Flush mounting depth [mm] Dimensions for shell [mm]
HxW HxW
E•2
Residential enclosures Surface and flush mounting E
Europe Line
Insulated enclosures
Designation Packing Ref. no.
§ IP30 unit
Accessories
E•3
E Residential enclosures Surface and flush mounting
Accessories
E•4
Residential enclosures Surface mounting E
FIX-O-RAIL JUNIOR
Insulated enclosures
§ IP40/30
Applications
For new buildings, replacing old units and adding extensions.
Features
– High degree of protection: IP40 (4 modules)
IP30 (8 modules)
– In accordance with EN 60439-3
– Total insulation §
– Available in two versions: 4 and 8 modules
– Colour: RAL 7035
– Surface mounting
– With CEBEC approval mark
Grommets
PG16 25 610130
PG21 25 610132
PG29 25 610133
E•5
E Residential enclosures Surface mounting
FIX-O-RAIL COVERS
IP30
Features
– Made from high resistance material
– Degree of protection: IP30
– Colour: RAL 7035
– Surface mounting
– With DIN-rail
E•6
Residential enclosures Surface mounting E
FIX-O-RAIL DESIGN
Insulated enclosures
IP40
Applications
Fix-o-Rail Design is a modern enclosure, with an attractive
styling, for new buildings, replacing old units or adding extensions.
Features
– Made from high impact resistance material
– Low side walls, allow easy access to apparatus
– Degree of protection: IP40
– Colours: base RAL 7036
cover RAL 7035
– 10, 14 and 18 modules
– Standard: in accordance with EN 60439-3
– Comprehensive cable entry facilities at top, bottom,
sides and rear
– Surface mounting
E•7
E Residential enclosures Surface mounting
FIX-O-RAIL CLASSIC
Insulated enclosures
IP30/IP40
Applications
Fix-o-Rail Classic and the accessories are a homogeneous system
for power distribution purposes in the house building, new homes,
adding extensions and replacing old units.
Features
– Degree of protection: IP30/IP40 with door
– Total insulation § (with backplate and door)
– Transparent or white door
– Adjustable DIN-rail
– Colour: RAL 9010
– 13, 26, 39 and 52 modules
– In accordance with EN 60439-3
– Surface mounting
– With KEMA approval
Classic A
The Fix-o-Rail Classic A packaging includes:
– A mounting frame
– A protective cover
– A backplate
– A support with earth and neutral terminals
– A modular blank plate
– Four insulating caps
– Labels for circuit identification
– Installation guidelines
Classic B
The Fix-o-Rail Classic B packaging includes:
– A mounting frame
– A protective cover
– Labels for circuit identification
– Installation guidelines
E•8
Residential enclosures Surface mounting E
FIX-O-RAIL CLASSIC
Insulated enclosures
Packing Ref. no.
IP30/IP40 unit
Connection terminals
Phase terminal 6 x 10 mm2 + 2 x 16 mm2 4 610185
Earth terminal 6 x 10 mm2 + 2 x 16 mm2 4 610186
Neutral terminal 6 x 10 mm2 + 2 x 16 mm2 4 610187
Coupling 2 618528
E•9
E Residential enclosures Surface mounting
FIX-O-RAIL 150
Insulated enclosures
§ IP40
Applications
Fix-o-Rail 150 is the best choice for power distribution purposes in:
– the house building industry. For applications in new homes, for
replacing old units or adding extensions.
– hotels, restaurants, offices, wherever a touch of elegance is
required of what was previously a purely functional part of the
building installation.
The Fix-o-Rail 150 enclosure is designed to meet these needs.
Features
– Total insulation §
– High degree of protection IP40
– High impact resistance material.
– In accordance with EN 60439-3
– Centre distance of 150 mm between DIN-rails and 30 mm
clearance behind the mounting frame, which allow plenty of
room for access when wiring both around and behind
the DIN-rails.
– Each DIN-rail can accomodate as much as 18 modular units of
18 mm width.
– Fix-o-Rail 150 has an undeep base for accessibility and easier
wiring.
– The removable mounting frame allows the contractor to save
both time and money.
– The multi-service enclosure Fix-o-Rail 150, designed for surface
mounting, is suitable for all DIN-rail modular equipment.
– Colour: grey RAL 7035
Components
1 Undeep base 6 Entry plate
2 Earth bar 7 Insulating cap
3 Removable mounting frame 8 Fastener
4 Protective cover 9 Hinge
5 Transparent door 10 Quarter-turn screw
E • 10
Residential enclosures Surface mounting E
FIX-O-RAIL 150
Insulated enclosures
Packing Ref. no.
§ IP40 unit
E • 11
E Residential enclosures Surface mounting
FIX-O-RAIL STANDARD
Insulated enclosures
§ IP41
Applications
The Fix-o-Rail Standard enclosures are used for power distribution
throughout the building industry.
The Fix-o-Rail Standard is a universal type suitable for surface and
flush mounting, made from high impact resistance material.
Features
– In accordance with EN 60439-3
– With CEBEC approval mark
– Degree of protection IP41
– Colour: grey RAL 7035
– Base has double wall construction to avoid any distorsion
during installation
– Removable mounting frame
– The centre distance between two rails is 125 mm
– For all DIN-rail equipment up to 92.5 mm height
– Each rail can accomodate up to 14 modules of 18 mm width
– Total insulation §
E • 12
Residential enclosures Surface mounting E
FIX-O-RAIL 55
Insulated enclosures
§ IP55 - IK07
Applications
The Fix-o-Rail 55 enclosures are designed for power distribution in
environments requiring a high degree of protection.
Features
– Total insulation §
– Can be coupled
– Transparent door
– Adjustable DIN-rail depth for equipment up to 92.5 mm
– Padlocking possible
– Door coupling at the left or right side
– In accordance with EN 60439-3
– With the CEBEC approval mark
E • 13
E Residential enclosures Surface mounting
FIX-O-RAIL SENIOR
Insulated enclosures
§ IP41 - IK08
Applications
As an elegant insulated loadcentre in:
– restaurants and hotels
– workshops
– hospitals
– shop centers
– offices
Features
– The Fix-o-Rail Senior enclosures have a double wall.
Construction: steel outer wall plus inner insulated extruded wall
to maintain the double insulation
– DIN-rail distance: 137.5 mm
– Cover plate with quarter-turn screws
– Removable mounting frame
Enclosures With plain grey or transparent door Grey door Transparent door
Fix-o-Rail Senior - 48 modules - 650 x 300 x 210 1 610239 610328
Fix-o-Rail Senior - 60 modules - 800 x 300 x 210 1 610248 610330
Fix-o-Rail Senior - 96 modules - 650 x 550 x 210 1 610240 610329
Fix-o-Rail Senior - 120 modules - 800 x 550 x 210 1 610249 610331
Fix-o-Rail Senior - 144 modules - 950 x 550 x 210 1 610257 610332
Earth/neutral bars
For enclosure 300 mm width 1 828152
For enclosure 550 mm width 1 828153
Cable-entry plates
Plain plate 1 815094
Predrilled plate 17 x PG13.5 1 815093
Predrilled plate 1 x PG21 + 2 x PG13.5 + 2 x PG29 + 4 x PG13.5 1 815092
E • 14
Residential enclosures Flush mounting E
FIX-O-RAIL ABACO
Insulated enclosures
§ IP40
Applications
Fix-o-Rail Abaco enclosures find their place in the power
distribution into the house building industry: new homes,
apartments, offices, hotels.
Due to the design of the masking frame and the door, the Abaco
flush mounting enclosure offers significant aesthetic appeal,
particularly in applications where appearance is important.
Features
– Flush mounting – Total insulation §
– Degree of protection IP40 – CE-marking
– High impact resistance material – Removable mounting frame
– Transparent door made from polycarbonate
– 20 mm clearance behind the mounting frame
– Colours: Grey: RAL 7035 (4, 7, 10, 12, 26 and 39 modules)
White: RAL 9010 (4, 7, 10 and 14 modules)
Metallised black: (4, 7, 10 and 14 modules)
E • 15
E Residential enclosures Flush mounting
FIX-O-RAIL 150-F1
Insulated enclosures
§ IP40
Applications
Fix-o-Rail 150-F1 is the best choice for power distribution purpose in:
– the house building industry. For applications in new homes, for
replacing old units or adding extensions
– hotel, restaurants, offices, wherever a touch of elegance is
required of what was previously a purely functional part of the
building installation.
Due to the design of the masking frame and door, the
Fix-o-Rail 150-F1 flush mounting enclosure offers significant
aesthetic appeal, particularly in applications where appearance is
important.
Features
– Total insulation §
– High degree of protection IP40
– High impact resistance material
– In accordance with EN 60439-3
– CEBEC approved
– CE-label
– Centre distance of 150 mm between DIN-rails and 20 mm
clearance behind the mounting frame
– Each DIN-rail can accomodate as much as 14 modular units of
18 mm width
– The removable mounting frame allows the contractor to save
1 2 4 5 both time and money
– With transparent door
– One enclosure can be installed in either:
• brickwork
• hollow walls
Components
1. Base
2. Support with terminals
3. Removable mounting frame
4. Protective cover
5. Masking frame and door
6. Removable entries
7. Positioning lugs
8. Label and label holders
9. Receptacle for storing the single line diagram
7 6 3 9 8
E • 16
Residential enclosures E
FIX-O-RAIL 150-F1
Insulated enclosures
Packing Ref. no.
§ IP40 unit
E • 17
E Residential enclosures Flush mounting
FIX-O-RAIL 150-F4
Insulated enclosures
§ IP40 - IK07
Applications
The Fix-o-Rail 150-F4 is an electrical distribution board for the
following applications:
– homes: new buildings, rennovations and extensions
– commercial buildings: offices, shops, etc.
Due to the discreet design and colour of the masking frame and
door, the Fix-o-Rail 150-F4 flush mounting enclosure offers
signifiant aesthetic appeal, particularly in applications where
appearance is important.
Features
– Base, protective cover and removable cable entries are made in
high resistant material
– Incandescent wire test:
• base and entries 850°C
• protective cover 650°C
• terminal supports 960°C
– Each DIN-rail can accomodate as much as 14 modular units of
18 mm width
Either with plain or transparent door
– One enclosure can be installed in either:
• brickwork
• half-inset mounting
• hollow walls
– The door and the masking frame are in sheet steel coated with a
white epoxy powder (colour RAL 9010)
– In accordance with EN 60439-3
– CEBEC and VDE 0603 Teil 1 approved.
➀ Base – Degree of protection: IP40-5
➁ Support with terminals – Total insulation §
➂ Removable mounting – CE-label
frame – Earth and neutral bar:
➃ Protective cover 14 modules: 14 x 16 mm2
➄ Masking frame and 28 modules: 17 x 16 mm2
door 42 modules: 2 (14 x 16 mm2)
➅ Removable entries 56 modules: 2 (14 x 16 mm2)
➆ Positioning lugs
➇ Labels and label
holders
➈ Receptacle for storing
the single line diagram
➉ Door catch
Packing Ref. no. Ref. no.
unit
Enclosures White plain door - With earth and neutral bar Transparent door Plain door
Fix-o-Rail 150-F4 - 14 modules - 1 row - 350 x 375 x 108 1 610368 610372
Fix-o-Rail 150-F4 - 28 modules - 2 row - 525 x 375 x 108 1 610369 610373
Fix-o-Rail 150-F4 - 42 modules - 3 row - 675 x 375 x 108 1 610370 610374
Fix-o-Rail 150-F4 - 56 modules - 4 row - 825 x 375 x 108 1 610371 610375
E • 18
Residential enclosures
Notes E
E • 19
E Residential enclosures Surface mounting
Features
– For surface mounting
– Suitable for DIN-rail mounting devices up to 70 mm as MCB’s,
RCCB’s, relays, switches, timers, contactors, etc.
– Manufactured from panel flat quality mild steel, cold reduced
CR4 from 1.0 mm
– Pre-treated prior to powder coating, fully immersed in iron
phosphate solution
– Electrostatic powder coating on a continuous line base colour
RAL 7035
– Slotted fixing holes on the base permit all leveling adjustment
– Earth and neutral fitted to the base, each terminal being able to
accept a 16 mm2 stranded round conductor
– With DIN-rails
FIX-O-RAIL 150 M
Metal enclosures
Features
– For maximum flexibility in use
1 row 18 modules
2 row 36 modules
3 row 54 modules
4 row 72 modules
– For surface mounting
– Earth and neutral terminals standard
– Distance between two DIN-rails: 150 mm
– Generous wiring room
– For DIN-rail equipment up to 70 mm high
– With plain grey or transparent door
– Colour: grey RAL 7035
E • 20
Residential enclosures Surface mounting E
Features
– For surface mounting
– Suitable for DIN-rail mounting devices up to 70 mm as MCB’s,
RCCB’s, relays, switches, timers, contactors, etc.
– Manufactured from panel flat quality mild steel, cold reduced
CR4 from 1.0 mm
– Pre-treated prior to powder coating, fully immersed in iron
phosphate solution
– Electrostatic powder coating on a continuous line base colour
RAL 7035
– Slotted fixing holes on the base permit all leveling adjustment
– Earth and neutral fitted to the base, each terminal being able to
accept a 16 mm2 stranded round conductor
– With DIN-rails
E • 21
E Residential enclosures
Distribution boards Surface mounting
MODULAR 200
Type B, 3P+N MCB distribution board
Features
– In accordance with BS 5486 Part 12 and BS EN 60439.3
– Modular design concept enables flexible selection of incomers,
extension boxes etc.
– Manufactured in quality mild steel, cold reduced CR4
– Pre-treated prior to electrostatic powder coating in RAL 7036 -
dark-grey
– Structured paint finish gives pleasing appearance with lasting
durability
– 200A continuously rated copper busbar
– 16 kA short-circuit capacity
– Fully shrouded phase busbars for increased safety
– One piece (no welds or rivets) phase busbars to eliminate the
risk of hot spots
– Accepts 6 kA, 10 kA and 15 kA MCB’s
– Pan assembly can be quickly removed to ease installation
– Ample space behind pan assembly aids wiring installation
– Comprehensive range of incomers up to 200A all with positive
contact indication
– Modular extension boxes can be added to install modular control
devices etc.
– 25 mm2 terminal cable capacity on earth and neutral bars
– Split earth and neutral bars reduces wiring installation time
– Clean earth facility available on request
– Shrouded neutral terminal bars for increased safety
– Quick neutral disconnect facility as standard to aid speedy
testing
– Reversible doors (left or right mounting) to suit installation
requirements
– Doors can be removed to reduce installation time
– Unique hinges allow doors to be opened to 110° within board
frame size, permitting boards to be fitted directly adjacent
– Doors an be fitted with looks for increased security
– Large capacity document holder on door for circuit
schedules/schematics
– Doors on all units with bonding conductors.
E • 22
Distribution boards
Residential enclosures Surface mounting E
MODULAR 200
Type B, 3P+N MCB distribution board
Packing Ref. no.
unit
Incomer kits Suitable for internal fitting in all type B MCB distribution boards
100A isolator, 3P switch disconnector 1 619111
E • 23
E Residential
Junction boxes
enclosures
FLEX-O-BOX
Junction boxes 2.5 mm2 - 6 mm2
§ IP65
Features
– Suitable for surface mounting
– 6 mm2 - 500V
– IP65 protection degree
– Standards and approvals:
CEBEC: NBN C68-685-2-0
NBN C68-685-1
VDE: 0606 Teil 1
IMQ: CEI 23-49
KEMA: IEC 670
– Colour: RAL 7035
– Material: resists the 750°C incandescent wire test
– Halogen-free
Flexible entries
– 7 x PG16 in the side wall
– 2 x 20 mm max. diameter entries in the back of the base
– Suitable for 20 mm max. diameter cable
– Suitable for 5/8” and 3/4” tubes
– Suitable for cable seals (8 mm min. thread length)
Junction box
Flex-o-Box - IP65 - 2.5 mm2 - colour RAL 7035 - 10/100 600656
Flex-o-Box - IP65 - 6 mm2 - colour RAL 7035 - 110 x 110 10/100 600651
SERIES 44
Junction boxes
2.5 mm2 - 4 mm2
Packing Ref. no.
unit
Capacity: 4 mm2
Junction box IP44 - 4 mm2 - 4 cable glands - 65 x 35 - colour: grey RAL 7035 1 619346
Junction box IP44 - 4 mm2 - 4 cable glands - 80 x 40 - colour: grey RAL 7035 1 619347
Capacity: 4 mm2
Junction box IP44 - 6 cable glands - 80 x 80 x 40 - colour: grey RAL 7035 1 619348
E • 24
Residential
Junction boxes
enclosures E
SERIES 55
Multipurpose junction boxes
§ IP66/IP67
Applications
– As an empty box
– As a junction box (10/16/25 mm2)
– Can be coupled
Other features
– Standard: IEC 529
– Approval: CEBEC
– Material: thermoplastic high impact polyphenylene oxyde
– Surface mounting
– High degree of protection IP66 - IK07
Mounting plates
For box 16 mm2 1 600520
For box 25 mm2 1 600536
E • 25
E Notes
Residential enclosures
E • 26