Professional Documents
Culture Documents
" - Wifi Controlled Smart Car Using Nodemcu and Blynk App": A Project Report On
" - Wifi Controlled Smart Car Using Nodemcu and Blynk App": A Project Report On
ON
OF
[2022 - 2023]
NBN College of Engineering, Pune
CERTIFICATE
This is to certify that the project report entitled
Submitted by
Place: Pune
Date :
Acknowledgement
With due respect and gratitude I take the opportunity to thank those who have helped me
directly and indirectly. I convey my sincere thanks to Dr.Prof. M.M. Jadhav, HoD, E &
TC Dept. and Prof. S.P. Deshmukh for their help in selecting the project topic and
support.
I thank to my project guide Prof. S.P. Deshmukh for her guidance, timely help and
valuable suggestions without which this project would not have been possible. Her
direction has always been encouraging as well as inspiring for me. Attempts have been
made to minimize the errors in the report.
I would also like to express my appreciation and thanks to all my friends who knowingly
or unknowingly have assisted and encourage me throughout my hard work.
A WiFi controlled smart car is an exciting project that can be accomplished using Nodemcu and
the Blynk app. Nodemcu is a popular open-source development board based on the ESP8266 Wi-
Fi module that allows for easy integration of WiFi capabilities into electronic projects. The Blynk
app is a user-friendly platform for creating mobile applications to control Internet of Things (IoT)
devices.
By combining these two technologies, you can create a car that can be controlled using a
smartphone or tablet. The car can be programmed to move forward, backward, turn left, and
turn right. Additionally, you can add other features such as headlights, horn, and even a camera
To create this project, you will need to connect the Nodemcu to the motor driver, which controls
the movement of the car. You will also need to program the Nodemcu to communicate with the
Blynk app, allowing for remote control of the car. The Blynk app can be used to design a custom
Process of wifi controlled
car
When this WIFI-controlled car is powered on, the Nodemcu board connects to the Blynk cloud via a
WiFi connection.
Then, when we press the Commands (Forward, Backward, Left, Right) buttons on the interface
created in the Blynk app, those values will be sent to the Nodemcu board via the Blynk cloud.
Then, the gear motors rotate according to those values. The L298N motor driver board is used for
this.
Also, the speed of these motors can be controlled by the slider created in the Blynk app.
Components
required
Nodemcu ESP8266
L298N motor driver
Gear motor
Robot wheel
Battery holder
Li-ion battery
Foamboard piece
SOFTWARE
REQUIRED
Arduino IDE
Blynk Android App
Nodemcu
ESp8266
NodeMCU is an open-source Lua based firmware
and development board specially targeted for IoT based
Applications.
Features :
Voltage: 3 -7vdc.
No Load RPM: 90 +/- 10.
No Load Current: 190mA (max.250mA).
Minimum Torque: 800 gm.cm.
Robot
wheels
Robot Tire (Wheel) fit with dc geared motor
shaft.
• Wireless control is the most important basic needs for all the people.
Wireless network controlled robots use wi-fi modules.