Professional Documents
Culture Documents
3D Phone Stand Specification - Mar 30 PDF
3D Phone Stand Specification - Mar 30 PDF
Brief: I will make a phone stand to prop my phone in its case up on a desk.
Specification:
1. Function: The phone stand is functional.
i.) The stand can securely hold one phone in place on a desk.
2. Customer: The phone stand fits the customer’s needs.
i.) The phone fits the customer’s Pixel in a case which has dimensions of
150 mm x 75 mm x 15 mm.
3. Stability: The phone stand is stable.
i.) The phone stand does not tip over when the phone is placed in it.
4. Durability: The phone stand is strong enough to last.
i.) The stand can hold the phone’s weight without breaking.
ii.) The stand can fall from desk height without breaking (without the use
of excessive speed or force).
5. Safety: The phone stand is safe to use.
i.) It does not have any edges sharp enough to cause harm to the customer.
ii.) All the edges have a minimum filet of 0.5 mm.
6. Material: The phone stand is printed using the available material.
i.) The phone stand is 3D printed using PLA.
ii.) The phone stand is printed using medium quality (0.2 mm) filament
thickness.
7. Resources: The phone stand uses a reasonable amount of resources.
i.) When printed with a wall and top/bottom thickness of 0.8 mm and a
20% infill density, the phone stand requires 12.21 meters of filament.
8. Angle: The phone stand allows the phone to be properly angled.
i) The screen of the phone is held at an angle of between 95 and 175 degrees
from the desk.
9. Weight: The phone stand is light enough to use.
Phone Stand Specification - Emily McCormack