Professional Documents
Culture Documents
I N ST A L L AT I O N I N ST R U CT I O N S
Please read this manual and follow its instructions carefully. To emphasize special information, the
Important symbol 7 and the words 7 WARNING, CAUTION and NOTE have special meanings. Pay special
attention to the messages highlighted by these signal words.
7 WARNING
Indicates a potential hazard that could result in death or injury.
CAUTION
Indicates a potential hazard that could result in motor damage.
1. Check that the kit has all the parts as listed in the above table.
Installation 2. Check each part in the kit for scratches or any form of damage.
for 3. Park the vehicle in a level place on its center stand.
4. Remove the ignition key from the switch and stre it in a safe place.
Installation 5. Protect any items removed or to be installed from scratches by placing them ou a soft cloth first
before putting them on the ground.
6. Use care not to cause any damage to the body of the vehicle during installation of the acces-
sory.
7 WARNING
Installation Do not work by using side stand. Jack up the motorcycle with fork stand and swing arm stand, and
fix it for safety.
Make sure that the motorcycle is supported securely.
To avoid getting burned, do not touch the engine, radiator and exhaust system until they have cooled.
1. Remove the under cowling, rear under cowling and rear under cowling bracket. Rear under
cowling and rear under cowling bracket is not reused.
2. Remove the horn and unscrew the bolts used for radiator mounting in order to remove the
exhaust system.
CAUTION
Be careful not to bend the radiator fin and the oil cooler fin.
10. Fit center stand cushion (8) under the left side
muffler.
Maintenance
/Care
GENUINE SUZUKI ACCESSORIES