Professional Documents
Culture Documents
Sheet
Sheet
AC Power
1.1 A two-element series circuit has average power 940W and
power factor 0.707 leading. Determine the circuit elements if the
applied voltage is v = 99 cos (6000 t + 30°) V.
Resonance Circuits
2.1. A series RLC Circuit has a resistance of 16 Ω, an inductance of
10 H and a capacitance of 1 F. find the resonance frequency,
quality factor.
2.5. In an RLC series circuit, the applied source voltage is e(t) = 2 sin
(10,000t), the value of R is 10 Ω and the value of C is 0.1 µF.
Find: a) The value of L that make the circuit resonate at the
source frequency.
b) The RMS Voltages across L and C .
c) The quality factor of the circuit.
Sheet (2)
3.3. In the coupled circuit shown in Fig (1), find V2 for which I1 = 0.
What voltage appears at the 8 Ω inductive reactance under this
condition?
Fig (1)
3.4. For the coupled circuit shown in Fig (2), find the components of
the current I2 resulting from each source V1 and V2.
Fig (2)
3.5. In the coupled circuit of Fig (3), find the input admittance
Y1 = I1/V1 and determine the current i1(t) for v1 =√ 2 cos (t).
Fig (3)
Three-phase Circuits
4.1. A Y-connected balanced three-phase generator with an
impedance of 0.4 + j 0.3 Ω per phase is connected to a Y-
connected balanced load with an impedance of 24 + j 19 Ω per
phase. The line joining the generator and the load has an
impedance of 0.6 + j 0.7 Ω per phase. Assuming the generator
source voltages as Van = 120 L30° V, find:
a) The line voltages b) The line currents.
Fig (1)
5.2. The Z-parameters of the circuit given in Fig (2) are : Z11 = 5;
Z12 = 2; Z21 = 1; and Z22 = 2.Find its Y-parameters.
Fig (2)
5.4. Find the T- and Z-parameters of the network in Fig (4). The
impedances of capacitors are given.
Fig (4)