Professional Documents
Culture Documents
Quincy
Parts & Accessories
SM
Tr u e B l u e R e l i a b i l i t y
Table of Contents
This book is divided into ten convenient categories and an alphabetical Index.
If you know the item you wish to order, please refer to the Index on pages 102-103 for a complete
listing of all parts and accessories offered in this catalogue.
The Table of Contents provides a brief overview of many of the items found in each section.
To ensure quality and compatibility, always order genuine Quincy parts and accessories.
For your convenience, fax number and E-mail address are located on the bottom of each facing page.
SCFM @
Part Number Description Weight
20" Water
140287-1 2" NPT Inlet and Discharge Connections 100 15
140287-4 4" NPT Inlet and Discharge Connections 400 70
142657-030 3" NPT Inlet and Discharge Connections
142657-040 4" NPT Inlet and Discharge Connections
142657-050 5" NPT Inlet and Discharge Connections
142657-060 6" NPT Inlet and Discharge Connections
2 parts@quincycompressor.com
Automatic Control Line Filter
• Line filter with auto drain • Metal bowls
Part Number In-Out Max Service Kit
Port NPT Pressure Part Number
129731 1/4" 250 129731-050
129732 1/4" 250 129732-050
FILTERS
143316 1/4" 250 143316-050
#8780
Part Number Inlet-Outlet NPT
Pipe Size Inches
Standard Pressure
Range (psig)
Repair Kit
Number
#23543
• Elements are polyester cloth reinforced with steel wire screen on both sides.
• Ends are mechanically held in place.
#110377F150
Hooded Filter/Silencer
- Reciprocating Compressors
4 parts@quincycompressor.com
Element for Filters
- Reciprocating Compressors
Part
Used On Filters
Number
FILTERS
110377E050 110377S050
111146E100 111146F100
#110377E100
#110377P100
6 parts@quincycompressor.com
Fluid Filters - Reciprocating Compressors
• Designed exclusively for Quincy Compressors
• Dual flow ports for improved lubricant filtration
• Filters clean lubricants to extend compressor life
• Use on all Quincy Pressure-Lubricated Reciprocating Compressors
FILTERS
• 10 Micron nominal filtration
• Quincy vacuum inlet filters are designed for full flow placement in applications that range from
atmospheric pressure to 29.9" HgV (.5 torr).
• Standard elements have a 10 micron rating and 99% filtration efficiency.
• Failure to install an inlet filter in a Quincy rotary screw vacuum pump voids the warranty.
8 parts@quincycompressor.com
Replacement Inlet Filter Elements
- Reciprocating and Vacuum Products
FILTERS
Polyester Vacuum Element Paper Element Features
Features
• Elements made with heavy-duty industrial
• Reinforced with steel wire on I.D. & O.D. strength paper
• Filtration rated 97-98% efficient • Elements bonded with thermostat resin to elimi-
• Washable nate element separation
• Dust load capacity increases 40-50% with • Filtration rated 99% efficient
prefilter • Dust load capacity increases 40-50% with pre-
filter
• Quincy vacuum inlet filters designed for full flow for placement in applications ranging from
atmospheric pressure to 29.9" HgV (.5 torr).
• Standard elements have a 10 micron rating and 99% filtration efficiency.
• Failure to install an inlet filter in a Quincy rotary screw vacuum pump voids the warranty.
10 parts@quincycompressor.com
Inlet Liquid Separators - Vacuum Pumps
• Centrifugal separators remove 99% of entrained liquid over 100 microns from an incoming
vacuum gas stream.
• Flange matches 125 lb. American standard flanges.
• Size range from 2" to 12".
FILTERS
• Consult Quincy Parts and Accessories for proper sizing and placement.
#141665
#110871-120
Temperature Gauges
Part
Enclosure Range
Number
21314 1/2" NPT 60ºF to 260ºF 10 ft. Capillary
128664 1/2" NPT & 60ºF to 260ºF 10 ft. Capillary
128664-1 3/4" NPT 60ºF to 260ºF 10 ft. Capillary #128664
12 parts@quincycompressor.com
Vacuum Gauges
• Mechanical gauges for measuring vacuum system pressure.
• Choice of 4 1/2" diameter scale or 2 1/2" scale
Part Number Description
GAUGES/INDICATORS
#140288 #141666
#110514-300 #140718
DDifferential
ifferential
PPressure
ressure M odel
Model MMounting
ounting
PPart
art NNumber
umber
SSetting
etting SStyle
tyle HHoles
oles
(P(psig)
SIG)
23779 10 DHM 2
GAUGES/INDICATORS
23779-1 15 DHM 3
23779-010 10 DHE 2
23779-40 40 DHM 3
Maintenance Indicators*
• In ordering maintenance indicators, you must know if it is for oil filter or separator.
Separator Change
Oil Filter Change Indicator
Indicator
22450-15 (Switch) 22450-15 (Switch)
23779-1 Type-1 23779 Type 1
23779-015 Type 2 23779-010 Type 2 #23779-015
23779-30 Type 1 124972-015 (Gauge)
124972-030 Gauge 129596-001 (Tab Switch)
129596-002 (Tab Switch)
• Type 1 - Mechanical
• Type 2 - Electrical
* Specify for oil filter or separator
#124972-015
14 parts@quincycompressor.com
Drain Valves
- Reciprocating and Rotary Compressors
Drain Cock
Part Number Pipe Size
#2713
VALVES
#7639
7639 33/8"
/8" N PT
NPT 11/4"
/4" N PT
NPT 330
0P SIG
psig 20 0P
200 SIG
psig 77818
818
16 parts@quincycompressor.com
Rotary Check Valves
- Swing Check Type
VALVES
#125039
125039 check valve is same as 123454 except that 125039 has a 1/4" NPT hole in the check
valve cap for line pressure controls or a pressure gauge.
124735 Spring
124833 Spring
124834 O-ring
124835 O-ring
124836 U Packing
VALVES
#122501-2 #122501-4
18 parts@quincycompressor.com
Dual Control Check Valve Assemblies
- Reciprocating Compressors
• For use with Part Numbers 110422-*** and 110423-*** pilot valve assemblies
(Check Valve is part of #110422 and #110423, as per page 25)
Body-Check Valve
6194 1
(Not available; order 6194X2)
VALVES
#6194X2
Part
Quantity Description
Number
Body-Check Valve-
6194 1
(Not available; order 6194X3)
C
VALVES
C C
B
B
C B
B A
A
#110965-110
#111491 A
A
#110921-225 #8405
20 parts@quincycompressor.com
Check Valve Bushings
- Vacuum Pumps
• High conductance spring-loaded check valve bushings seal against oil or air back migration
• O-ring seal, carbon or stainless steel construction
• Check valve bushings are used for QSVB (all) and QSVI 20.
• For horizontal mounting only
#141661
Dimensions in Inches
Part Number Description Size Size Hex Orifice
A C D (NPT) E (NPT)
(Male) (Female) Size B Dia.
141661-001 Carbon Steel 3/4 1/2 1.3 1.12 0.25 3/4-14 1/2-14 0.46
141662-001 Stainless Steel 3/4 1/2 1.3 1.12 0.25 3/4-14 1/2-14 0.46
141661-002 Carbon Steel 1 3/4 1.8 1.38 0.5 1-11 1/2 3/4-14 0.59
141662-002 Stainless Steel 1 3/4 1.8 1.38 0.5 1-11 1/2 3/4-14 0.59
VALVES
141661-003 Carbon Steel 1 1/4 1 1.8 1.75 0.5 1 1/4-11 1/2 1-11 1/2 0.89
141662-003 Stainless Steel 1 1/4 1 1.8 1.75 0.5 1 1/4-11 1/2 1-11 1/2 0.89
141661-004 Carbon Steel 1 1/2 1 1/4 2.17 2 0.62 1 1/2-11 1/2 1 1/4-11 1/2 1.14
141662-004 Stainless Steel 1 1/2 1 1/4 2.17 2 0.62 1 1/2-11 1/2 1 1/4-11 1/2 1.14
141661-005 Carbon Steel 2 1 1/2 2.17 2.5 0.62 2-11 1/2 1 1/2-11 1/2 1.39
141662-005 Stainless Steel 2 1 1/2 2.17 2.5 0.62 2-11 1/2 1 1/2-11 1/2 1.39
141661-006 Carbon Steel 2 1/2 2 2.5 3 0.62 2 1/2-8 2-11 1/2 1.56
141662-006 Stainless Steel 2 1/2 2 2.5 3 0.62 2 1/2-8 2-11 1/2 1.56
141661-007 Carbon Steel 3 2 1/2 3.1 3.5 1 3-8 2 1/2-8 2.03
*1/8 lb. crack-
ing pressure
141662-007 Stainless Steel 3 2 1/2 3.1 3.5 1 3-8 2 1/2-8 2.03
*1/8 lb. crack-
ing pressure
#140292
VALVES
140292-7 Carbon Steel 4" 3.96 3.66 0.38 1.05 6.18 2.56
140292-8 Stainless Steel 4" 3.96 3.66 0.38 1.05 6.18 2.56
140292-3 Carbon Steel 5" 4.98 4.58 0.5 1.25 7.31 3.28
140292-4 Stainless Steel 5" 4.98 4.58 0.5 1.25 7.31 3.28
22 parts@quincycompressor.com
Pilot Valves
- Reciprocating Compressors
• For all Quincy QR, QT, QTS, QRD, and QDD models.
• Load and unload pressure settings are easily adjustable and repeatability is superior.
• Design provides a cleaner appearance and increased reliability.
• Full assortment of repair parts and kits available.
VALVES
page 27.
110832-150 135 to 150
110832-165 150 to 165
110832-175 165 to 175
110832-250 225 to 250
110832-060 50 to 60
#110832-150
110832-125 110 to 125
110832-050 42 to 50
S tandard
Standard Special
Part Number
Part N umber Special Notes
Notes
Setting
S etting -- Ppsig
SIG
111422-997* 30-70
111422-998* 71-150
111422-999* 151-400
111422-000* 401-500
Unload Ranges
111422-080 70-80 are adjustable.
111422-100 90-100 See Range Chart
on page 27.
111422-110 100-110
111422-140 130-140
111422-150 135-150
111423-997* 30-70
111423-998* 71-1520
Unload Ranges
111423-999* 151-400 are adjustable.
See Range Chart
111423-000* 401-500
on page 27.
111423-080 70-80
111423-100 90-100
111423-110 100-110
111423-140 130-140
111423-150 135-150
111423-165 150-165
111423-175 165-175
#111423-100
24 parts@quincycompressor.com
Pilot Valves - Repair Kit, Replacement Springs,
and Differential Setting Ranges
- Reciprocating Compressors
30 2 4 3 1 O-ring
40 5 8 4 1 O-ring
5 1 Ball
110832-052 50 5 8
6 1 Disc
60 5 8
7 1 O-ring
70 5 10
8 1 Pin
80 5 10
90 5 12
* Use for repairing pilot
100 5 13
#110832
110 5 15 #111422
110832-053 #111423
VALVES
120 5 15
130 5 18
140 5 18
150 5 20
110832-055 500 40 75
Standard
Part Number Special Notes
Setting - psig
QT Products - Use on QTS
112999-125* 110-125
Unload Ranges are
112999-110* 95-110
Adjustable
112961-125+ 110-125
QT Products - Use on QT15 & QT25
113320-095 75-95
113320-115 100-115
113320-140 125-140 Note: Repair Kit
113320-165 150-165 #113320K includes
113321-090 80-90 Spring
113321-100 90-100
113321-110 100-110
113321-125 110-125 Unload Ranges are
113321-140 130-140 adjustable #112999-110
113321-150 135-150
113321-165 150-165
113321-175 165-175
QT & QRD Products - Dual
For use with
VALVES
Control Operation
110998-045 35-45 QRD
110998-070 50-70 QRD
110998-085 75-85 QT
110998-095 75-95 QRD,QT,QTS Dup
110998-115 100-115 QRD, QT #113320-115
110998-140 125-140 QT
110998-165 150-165 QT
For QRD & QT Products - Continuous Run
113708-050 35-45
113708-075 50-70
113708-100 75-85
113708-125 75-95
113708-175 150-175
114551 40-250 QTG-11K #110998-140
114867 40-250 QTG11H
* Dual Control
+ Continuous Run
26 parts@quincycompressor.com
Pressure - Relief Valves
• Brass body for pressures less than 300 psig • ASME certified
• Steel body for pressures above 300 psig • National Board certified
• Available in a wide variety of pressure settings
VALVES
2961-125 1/4" Drilled Port 125 77 Brass Body / Metal Seat
2961-150 1/4" Drilled Port 150 90 Brass Body / Metal Seat
2961-160 1/4" Drilled Port 160 85 Brass Body / Metal Seat
2961-165 1/4" Drilled Port 165 98 Brass Body / Metal Seat #3767-200
2961-185 1/4" Drilled Port 185 109 Brass Body / Metal Seat
2961-200 1/4" Drilled Port 200 118 Brass Body / Metal Seat
2961-215 1/4" Drilled Port 215 128 Brass Body / Metal Seat
2961-225 1/4" Drilled Port 225 132 Brass Body / Metal Seat
2961-250 1/4" Drilled Port 250 145 Brass Body / Metal Seat
2961-275 1/4" Drilled Port 275 159 Brass Body / Metal Seat
#2961-90
141478-200 1/2" Drilled Port 200 469 Brass Body / Soft Seat
3769-90 1/2" Drilled Port 90 142 Brass Body / Metal Seat
3769-120 1/2" Drilled Port 120 183 Brass Body / Metal Seat
3769-200 1/2" Drilled Port 200 292 Brass Body / Metal Seat
3769-225 1/2" Drilled Port 225 326 Brass Body / Metal Seat
121232-2 1/2" Drilled Port 175 414 Brass Body / Metal Seat
3371-150 3/4" Drilled Port 150 183 Brass Body / Brass Seat
#3769-120
28 parts@quincycompressor.com
Pressure - Relief Valves
VALVES
141966-23 1/2" 3/4" 175 391 Brass Body / Brass Seat
3/4" #112526-300
141966-22 1/2" 200 455 Brass Body / Brass Seat
141966-46 1/2" 3/4" 225 498 Brass Body / Brass Seat
141966-47 1/2" 3/4" 240 542 Brass Body / Brass Seat
23268-50 1" 1 1/4" 225 1392 Brass Body / Brass Seat #23268-2
9158-40 3/4" Top Port 40 203 Brass Body / Brass Seat
9158-60 3/4" Top Port 60 279 Brass Body / Brass Seat
9158-75 3/4" Top Port 75 336 Brass Body / Brass Seat
9158-100 3/4" Top Port 100 431 Brass Body / Brass Seat
9158-125 3/4" Top Port 125 526 Brass Body / Brass Seat
9158-140 3/4" Top Port 140 583 Brass Body / Brass Seat
3371-150 3/4" Top Port 150 183 Brass Body / Brass Seat
9159-60 1" Top Port 60 437 Brass Body / Brass Seat
9159-75 1" Top Port 75 526 Brass Body / Brass Seat
30 parts@quincycompressor.com
Pressure - Relief Valves
VALVES
23268-41 2" 2" 40 1698 Brass Body / Brass Seat
23268-24 2" 2 1/2" 25 959 Brass Body / Brass Seat
23268-40 2" 2 1/2" 60 1834 Brass Body / Brass Seat
141966-5 2" 2 1/2" 150 4084 Brass Body / Brass Seat
23268-13 2" 2 1/2" 175 4584 Brass Body / Brass Seat
23268-51 2" 2 1/2" 235 6084 Brass Body / Brass Seat
23268-42 2 1/2" 2 1/2" 40 2573 Brass Body / Brass Seat
23268-43 2 1/2" 3" 15 956 Lift Lever Release
23268-45 2 1/2" 3" 15 956 Pressure Tight Cap
23268-49 2 1/2" 3" 40 3728 Brass Body / Brass Seat
#9158-6
#110425
VALVES
#111136
32 parts@quincycompressor.com
Vacuum Ball Valves: Flanged
• Ball valves seal vacuum systems ranging from atmospheric pressure to 29.9" HgV (.01 torr).
• Full flow ball valves featuring carbon steel body and stainless steel trim.
• 10 position lever operation or worm gear operation
VALVES
#141668
Dimensions in Inches
Part Number Description
Size Bore L H D A C
141668-G06 Worm Gear Operation 6" 5.91 15.5 13.27 12.2 2.58 6.5
141668-G08 Worm Gear Operation 8" 7.87 18 16.3 14.17 3.48 8.27
141668-G10 Worm Gear Operation 10" 9.84 21 18.78 19.69 3.68 14.29
#140286
VALVES
Dimensions in Inches
Part Number Description Size
A B C D E F
NPT
140286-1 Hand Lever Operation 1/4 2.81 1.47 1.81 4 1.19 0.31
140286-4 Hand Lever Operation 3/4 3.06 1.63 1.81 4 1.28 0.5
140286-6 Hand Lever Operation 1 1/4 3.84 0.03 2.75 5. 5 1.91 0.81
34 parts@quincycompressor.com
Vacuum Butterfly Valves: Lug Body
• Valves seal vacuum systems ranging from atmospheric pressure to 29.9" HgV (.01 torr).
• Full flow butterfly valves featuring ductile iron body with Viton seals.
• 10 position lever operation
VALVES
#141672
Dimensions in Inches
Part Number Size
A C D E F G H J K L N M P R S
141672-003 3" 1.86 4.69 8 5.38 4 3.25 0.41 6 5/8-11 4 1 9.5 0.44 0.63 0.38
141672-004 4" 2.11 5.44 9.31 6.88 4 3.25 0.41 7.5 5/8-11 8 1 9.5 0.44 0.63 0.38
141672-005 5" 2.24 6.38 10.75 7.75 4 3.25 0.41 8.5 3/4-10 8 1.25 11 0.44 0.84 0.5
141672-006 6" 2.24 6.88 11.88 8.75 4 3.25 0.41 9.5 3/4-10 8 1.25 11 0.44 0.84 0. 5
141672-008 8" 2.54 8.06 14.19 11 6 5 0.53 11.75 3/4-10 8 1.38 15 0.56 0.84 0.5
141672-010 10" 2.74 9.97 17.41 13.38 6 5 0.53 14.25 7/8-9 12 1.38 15 0.56 0.96 0.63
#141671
Dimensions in Inches
Part Number Size
A C D E F G H N M P R S
141671-003 3" 1.86 4.69 8 5.38 4 3.25 0.41 1 9.5 0.44 0.63 0.38
141671-004 4" 2.11 5.44 9.31 6.88 4 3.25 0.41 1 9.5 0.44 0.63 0.38
141671-005 5" 2.24 6.38 10.75 7.75 4 3.25 0.41 1.25 11 0.44 0.84 0.5
141671-006 6" 2.24 6.88 11.88 8.75 4 3.25 0.41 1.25 11 0.44 0.8 4 0.5
141671-008 8" 2.54 8.06 14.19 11 6 5 0.53 1.38 15 0.56 0.84 0.5
141671-010 10" 2.74 9.97 17.14 13.38 6 5 0.53 1.38 15 0.56 0.96 0.63
36 parts@quincycompressor.com
Water Temperature Regulating Valves
- Rotary and Reciprocating QR-100™ Compressors
• Regulates water flow to maintain desired temperature.
• Used in water-cooled compressors and water-cooled aftercoolers.
Part Temperature
Description Pipe Size
Number Range ºF
23219-1 6 ft. capilliary with 1/2" NPT 1" NPT 115-180º
23475 8 ft. capillary with 3/4" NPT 1 1/4" NPT 115-180º
23219-2 6 ft. capillary with 1/2" NPT 1 1/4" NPT 115-180º
7651 6 ft. capillary 1/2" NPT 115-180º
VALVES
#23219-1 #23219-2
21961 .015
21962 .005
21962-002 .002
21962-003 .003
122354 .010
P ressure
Pressure
Part
Part
Description
Number RRange
ange Description
Number
PSIG))
((psig
• Not all hydraulic unloader assemblies are for use with all compressor systems
• Hydraulic unloader assembly ordered should be within the operating psig limits of the system
* For use with diester or phosphate ester synthetic lubricants
VALVES
* The new style is easily distinguished by the two alpha characters stamped in the body next to
the vent hole.
* DO NOT use these kits in any unloader that does not qualify by these parameters.
38 parts@quincycompressor.com
Moisture Trap Repair Kits
- Rotary Compressors
Moisture Trap
Repair Kit Fits Moisture
Gasket Only Sizes
Part Number Trap
7791 8231 110382 1/2" - 3/4"
7792 8230 110382 1" - 3"
7899-051 8230 7899-150 1 1/2"
124827-052 124827-051 124827 3/4" - 3"
#124827-125
Thermostatic Valve 125732 Fluid Power Repair Kit Number Kit Fits Valve Number
Repair Kit Number Kit Fits Valve Number 125732A050 125732-140 (140ºF) #20344
125732A055 125732-180 (180ºF)
125732-050 125732-140 (140ºF)
125732-057 125732-160 (160ºF) Thermostatic Valve 128785 AMOT
125732-055 125732-180 (180ºF)
Repair Kit Number Kit Fits Valve Number
Thermostatic Valve 128785 Fluid Power 21338 20203A (140ºF)
21338 20204A (140ºF)
Repair Kit Number Kit Fits Valve Number
21338-1A 20203A075 (75ºF)
124973-050 20203 (140ºF) 125875A050 12875A001 (140ºF)
124973-050 20204 (140ºF) 125875-052 12875A002 (160ºF)
125875-050 20203-075 (140ºF)
21338-1 12875-001 (75ºF)
Thermostatic Valve 124973 Fluid Power Thermostatic Valve 125657 Fluid Power
Repair Kit Number Kit Fits Valve Number Repair Kit Number Kit Fits Valve Number
124973-050 124973-001 (140ºF) 125657-050 125657 (140ºF)
124973-050 124973-002 (140ºF) 125657-050 125657-001 (140ºF) #125657-004
124973-050 124973-003 (140ºF) 125657-050 125657-002 (140ºF)
124973-050 124973-004 (140ºF) 125657-055 125657-003 (180ºF)
124973-056 124973-005 (180ºF) 125657-055 125657-004 (180ºF)
124973-056 124973-006 (180ºF) 125657-055 125657-005 (180ºF)
124973-056 124973-007 (180ºF) 125657-055 125657-006 (180ºF)
124973-056 124973-008 (180ºF) 125657-060 125657-007 (200ºF)
124973-062 124973-009 (200ºF) 125657-060 125657-008 (200ºF)
124973-050 124973-010 (140ºF) 125657-060 125657-009 (200ºF)
124973-056 124973-011 (180ºF) 125657-061 125657-010 (90ºF)
124973-069 124973-012 (210ºF) 125657-063 125657-011 (150 F)
124973-069 124973-013 (220ºF) 125657-055 125657-012 (180 F)
KITS
40 parts@quincycompressor.com
Maintenance Kits for QR-25®, QT®, and QTS®
-Reciprocating Compressors
• Kits contain all parts necessary to service either QTS, QT, or QR basic pumps manufactured within the referenced
record of change.
• QR overhaul kits include side seal rings standard rings available upon request.
• Pin kits on X2-X3-X8-206-210-214 include con-rod assemblies. (These models do not have pin bushings or inserts).
Overhaul Kit: Complete head kit, ring set, oil seals, and connecting rod insert bearings, if used.
Piston Pin Kit-press fit or float fit: Piston pins and bushings, where applicable.
#K325A #K325C
42 parts@quincycompressor.com
Maintenance Kits for QR-25®
Kit Part
Description Record of Change
Number
K230VA 3V-8V Head Kit RC3V-8V
K230VB Overhaul Kit - SS Rings
K230VC Piston Pin - Press Fit RC031-100
K230VD Piston Pin Float Fit
K230VE Overhaul Kit Teflon Rings RC3V-8V
K240A Head Kit All Models
K240B Overhaul Kit - SS Rings
K240C Piston Pin Press Fit RC010-102
K240D Piston Pin Float Fit
K240E Head Kit All Models
K240VA 3V-6V Head Kit RC3V-6V
K240VB Overhaul Kit - SS Rings
K240VC Piston Pin - Press Fit RC3V-6V
K240VD Piston Pin Float Fit
K240VE Overhaul Kit Teflon Rings RC3V-6V
K255A Head Kit All Models
K255B Overhaul Kit - SS Rings RC007-014
K255C Piston Pin - Press Fit
K255D Piston Pin Float Fit
K270A Head Kit All Models
K270B Overhaul Kit - SS Rings
RC100-101
K270C Piston Pin - Press Fit
K270D Piston Pin - Float Fit
K270VA Head Kit All Models
K270VB Overhaul Kit - SS Rings
RC1V-7V
K270VC Piston Pin - Press Fit
K270VD Piston Pin - Float Fit
K310A Head Kits All Models
K310B Overhaul Kit SS Rings
K310C Piston Pin - Press Fit RC025-104
K310D Piston Pin - Float Fit
K325A Head Kit All Models
K325C Overhaul Kit - SS Rings
K325D Piston Pin - Press Fit RC015-104
K325E Piston Pin - Float Fit
KITS
RC007-008
3) KW5120F Piston Pin - Float Fit RC009-012
44 parts@quincycompressor.com
Maintenance Kits for QT® and QTS®
Kit Part
Description Record of Change
Number
KQTSA Overhaul Kit RC -2-3-4
KQTSB Head Kit
KQTSC Overhaul Kit
RC -100
KQTSD Head Kit
KQT5A Head Kit w/o Head Unloaders
KQT5B Overhaul Kit w/o Head Unloaders
KQT5C Head Kit with Head Unloaders
RC-104
KQT5D Overhaul Kit with Head Unloaders
KQT5E Head Kit - Gas Driven Motor
KQT5F Overhaul Kit - Gas Driven Motor
KQT7.5A Overhaul Kit
KQT7.5B Head Kit RC-106
KQT7.5C Overhaul Kit w/o Head Unloaders
KQT7.5D Head Kit w/o Head Unloaders
KQT7.5E Overhaul Kit with Head Unloaders RC-107
KQT7.5F Head Kit with Head Unloaders
KQT15A Overhaul Kit w/o Head Unloaders
KQT15B Head Kit w/o Head unloaders
KQT15C Overhaul Kit with Head Unloaders RC-100 -101
KQT15D Head kit w/ Head Unloaders
KQT25A Head Kit
KQT25B Overhaul Kit RC103
KITS
#111165
#112735 #112982K001
KITS
#112981K001 #112985K001
#111558 #6599X
46 parts@quincycompressor.com
Belt Guard Dimensional Information
- Reciprocating Compressors
• Totally enclosed • All assemblies include mounting brackets
• Built to OSHA standards • Fits portable, stationary, and climate control models
(Quincy Compressors not certified by OSHA) • Available for tank mount and base mount
Tank Base
* Clamshell
RECEIVERS & GUARDS
48 parts@quincycompressor.com
Spring Isolator
- Rotary and Reciprocating Compressors
• Color coded springs for easy load identification • Single and double spring designs
• For use with all tank mounted or base plate mounted compressors
Pad Isolators
- Rotary and Reciprocating Compressors
7802-1 SET 4 4" x 4" x 1" 800 lbs. 60 & 80 gallon receiver
• All pads are cork filled with ribbed rubber on either side
#7802
Reference Tank 4
Reference Tank 1 Reference Tank 2
Simplex Tanks
Top Plate Tank
Tank Capacity Working
Part Compressor Model Reference
Part Number Gallons Pressure
Number Figure
112697N150 QTS-3 8 Vertical 150 5
112904-150 QTS-3 8 Vertical 150 5
112649C150 QTS-3 20 Horizontal 150 1
113264-165 Welded 210 QTS-3 30 Horizontal 165 1
113265-165 Welded 210 QTS-3 30 Vertical 165 2
112676-150 Welded QTS-3 30 Vertical 150 2
113266-200 Welded 210 310 240V 325 60 Horizontal 200 3
QTS-3 QT-5 QT-7.5
113891-200 Welded 210 310 240V 325 60 Horizontal 200 3
QTS-3 QT-5 QT-7.5
113267-200 Welded 310 325 QT-5 QT-7.5 60 Vertical 200 5
112673-150 Welded QTS-3 60 Vertical 150 5
114948-200 Welded QRDS-2,3 60 Vertical 200 5
114965-200 Welded QTS-5 60 Vertical 200 5
113268-200 Welded 310 325 QT-5 QT-7.5 80 Horizontal 200 3
QT-10
113269-200 113276 340 350 370 270 QT-15 80 Horizontal 200 3
113277 QRDS-5,7.5 80 Horizontal 200 3
113270-200 Welded 310 325 QT-5 QT-7.5 80 Vertical 200 5
114949-200 Welded QRDS-2,3 80 Vertical 200 5
113271-200 113281 310 325 QT-5 QT-7.5 120 Horizontal 200 3
QT-10
113280 340 350 370 120 Horizontal 200 3
113279 QT-25 5120 120 Horizontal 200 3
113278-001 390 120 Horizontal 200 3
113272-200 Welded QT-15 120 Horizontal 200 4
RECEIVERS & GUARDS
* For 254 and 256 frame motors **Reference #6, Top Plate
50 parts@quincycompressor.com
Receivers for QR®, QT®, and QTS® Units
- Reciprocating Compressors
• ASME coded receivers • With and without welded top plate
• National Board approved • Top plates sold separately as noted below
Reference Tank 3
Reference Tank 5
Duplex Tanks
Gas Tanks
Top Plate Tank
Tank Compressor Model Capacity Working
Part Reference
Part Number Gallons Pressure
Number Figure
112671C150 QTS 20 150 6
113727-200 Welded QT-5 QT-7.5 325 30 Horizontal 200 6
113716-200 114392 QT-5 325 60 Horizontal 200 6
113717 QT-15 350 60 Horizontal 200 6
#140293
52 parts@quincycompressor.com
Vacuum Receivers - Horizontal
• ASME coded receivers for use in vacuum liquid separation. Rated for full vacuum.
• Leak tight to below 29.88" HgV (1 torr).
• Tank includes ports for gauges, ports for liquid sensors, and clean out entry way.
• Internal baffle ensures changes in flow direction.
#140294
features:
• Outstanding wear protection reduces friction and extends bearing and rotor life.
• Greater oxidative stability than mineral oil-based products
• Multiservice capability-QuinSyn® remains pumpable at low temperatures while maintaining
sufficient viscosity at higher temperatures.
• Excellent demulsifibility in high humidity applications
• Compatible with mineral oil systems
• Non-toxic - Not hazardous by OSHA standards
5 Gallons
Part Number Size of Container Special Features • Lubricants other than Quin-
QuinSyn® Syn® may not be compatible
Our most popular and versatile lubricant/fluid with components used in rotary
127462-005 5 Gallons
Pale blue in color screw compressors.
127462-055 55 Gallon Drum Rated at 6000 to 8000 hour under normal use
• If necessary to convert unit
QuinSyn-F® (Food Grade) to a synthetic other than
110756-005 5 Gallons Off White in Color QuinSyn®, contact authorized
For Special Food Applications
110756-055 55 Gallon Drum Quincy Compressor distributor.
QuinSyn-IV® • It is not recommended to mix
For Light-Duty Applications compressor fluids due to
141140-005 5 Gallons
Economical where lubricant/fluid must be incompatibility issues
141140-055 55 Gallon Drum changed often
QuinSyn-XP®
For High-Pressure Applications
142784-005 5 Gallons
For 10-year Warranties
142784-055 55 Gallon Drum Formulated for the Toughest Environment
QuinSyn-PG® Part Number Size of Container
For applications where condensate disposal is
143808-005 5 Gallons
a concern
QuinSyn Flush®
143808-055 55 Gallon Drum
128542-005 5 Gallons
QuinSyn-Plus® ™ 128542-055 55 Gallon Drum
For applications where long life and demulsibil-
144046-005 5 Gallons
ity of the oil is important
144046-055 55 Gallon Drum
54 parts@quincycompressor.com
Quin-Cip® Lubricant/Fluids For Reciprocating Compressors
Quincy lubricants are specially formulated for Quincy Reciprocating Compressors.
We offer a wide range of lubricants/fluids for varying conditions with the following standard features:
LUBRICANTS/FLUIDS
• Excellent demulsibility in high humidity applications
• Non-toxic - Not considered hazardous by OSHA standards
• Non-detergent lubricant
• Provides protection against heat for a longer compressor life
Part Number SAE Description Pour Flash Viscosity Ambient
Point cSt at 40º
Grade Point Temperature
COC C
112541Q032 ISO-32 (1Qt)
112541G032 ISO-32 (1 Gal.) 31.2ºC 0 to 32ºF
10 -15ºF 400ºF
112541P032 ISO-32 (5 Gal.)
112541D032 ISO-32 (55 Drum)
112542Q068 ISO-68 (1 Qt) 1 Quart
112542G068 20 ISO-68 (1 Gal.)
0ºF 460ºF 69.2ºC 32 to 80ºF
112542P068 ISO-68 (5 Gal.)
112542D068 ISO-68 (55 Drum)
112543Q100 ISO-100 (1 Qt)
112543G100 ISO-100 (1 Gal.) 80ºF and
112543P100 30 ISO-100 (5 Gal.) 0ºF 480ºF 101.4ºC
Above
112543D100 ISO-100 (55 Drum)
56 parts@quincycompressor.com
Demand-A-Matic® Control Panels
- Rotary Screw Compressors
• Sequence controller responds to system demand by automatically starting or stopping unit.
• Either manual rotation or automatic timed rotation of lead machine.
• NEMA 1, NEMA 4, or NEMA 12 enclosures.
• Important: The control panels of the compressor units must be wired for "Auto Demand."
ELECTRICAL
NEMA Number of Units NEMA Number of Units
Part Number Part Number
Enclosure Controlled Enclosure Controlled
Manual Rotation Automatic Rotation
141114M1*2 1 2 141114T1*2 1 2
141114M1*3 1 3 141114T1*3 1 3
141114M1*4 1 4 141114T1*4 1 4
141114M1*5 1 5 141114T1*5 1 5
141114M4*2 4 2 141114T4*2 4 2
141114M4*3 4 3 141114T4*3 4 3
141114M4*4 4 4 141114T4*4 4 4
141114M4*5 4 5 141114T4*5 4 5
141114M2*2 12 2 141114T2*2 12 2
141114M2*3 12 3 141114T2*3 12 3
141114M2*4 12 4 141114T2*4 12 4
141114M2*5 12 5 141114T2*5 12 5
*Insert "S" if full load pressure of machines is less than or equal to 125 psig.
*Insert "H" if full load pressure of machines is greater than or equal to 125 psig.
Number of Number of
NEMA NEMA
Part Number Units Part Number Units
Enclosure Enclosure
Controlled Controlled
141114M1V2 1 2 141114T1V2 1 2
141114M1V3 1 3 141114T1V3 1 3
141114M1V4 1 4 141114T1V4 1 4
141114M4V2 4 2 141114T4V2 4 2
141114M4V3 4 3 141114T4V3 4 3
141114MV4 4 4 141114T4V4 4 4
141114M2V2 12 2 141114T2V2 12 2
141114M2V3 12 3 141114T2V3 12 3
141114M2V4 12 4 141114T2V4 12 4
58 parts@quincycompressor.com
Demand-A-Matic® Control Panels
- Reciprocating Compressors
• Sequence controller responds to system demand by automatically starting or stopping unit.
• Either manual rotation or automatic timed rotation of lead machine.
• NEMA 1, NEMA 4, or NEMA 12 enclosures.
• Important: The control panels of the compressor units must be wired for "Auto/Demand."
ELECTRICAL
Number of Number of
Part NEMA Part NEMA
Units Units
Number Enclosure Number Enclosure
Controlled Controlled
123186-01 1 2 123186-01L 1 2
123186-02 1 3 123186-02L 1 3
123186-03 1 4 123186-03L 1 4
123186-04 4 2 123186-04L 4 2
123186-05 4 3 123186-05L 4 3
123186-06 4 4 123186-06L 4 4
123186-07 12 2 123186-07L 12 2
123186-08 12 3 123186-08L 12 3
123186-09 12 4 123186-09L 12 4
* Enclosures are rated for NEMA 1. NEMA 4 enclosures are available upon request.
60 parts@quincycompressor.com
Electric Motors - General Ordering Information
- Rotary and Reciprocating Compressors
• When placing an order, the following information is required:
voltage phase horsepower
type (ODP-TEFC) service factor frame size
• A written copy of the above specifications, signed by the customer, must accompany all telephone and fax
orders.
• No exchanges on motors after a voltage has been applied
• Other motors available upon request.
• If you cannot find the motor you require, contact Quincy Parts and Accessories.
ELECTRICAL
Electric Motors for QSI Rotary Screw Compressors
Frame Service
Part Number HP Voltage Type Phase RPM Special Notes
Size Factor
129712Q007 50 230/460 ODP 3 326TSC 1.15 1800 Std Efficiency
129712Q042 50 230/460 ODP 3 326TSC 1.15 1800 Prem Efficiency
129712Q010 50 230/460 TEFC 3 326TSC 1.15 1800 Std Efficiency
129712Q047 50 230/460 TEFC 3 326TSC 1.15 1800 Prem Efficiency
129712R007 60 230/460 ODP 3 364TSC 1.15 1800 Std Efficiency
129712R042 60 230/460 ODP 3 364TSC 1.15 1800 Prem Efficiency
129712R010 60 230/460 TEFC 3 364TSC 1.15 1800 Std Efficiency
129712R047 60 230/460 TEFC 3 364TSC 1.15 1800 Prem Efficiency
129712S007 75 230/460 ODP 3 365TSC 1.15 1800 Std Efficiency
129712S042 75 230/460 ODP 3 365TSC 1.15 1800 Prem Efficiency
129712S010 75 230/460 TEFC 3 365TSC 1.15 1800 Std Efficiency
129712S047 75 230/460 TEFC 3 365TSC 1.15 1800 Prem Efficiency
129712T007 100 230/460 ODP 3 404TSC 1.15 1800 Std Efficiency
129712T042 100 230/460 ODP 3 404TSC 1.15 1800 Prem Efficiency
129712T010 100 230/460 TEFC 3 405TSC 1.15 1800 Std Efficiency
129712T047 100 230/460 TEFC 3 405TSC 1.15 1800 Prem Efficiency
129712U017 125 460 ODP 3 405TSC 1.15 1800 Std Efficiency
129712U051 125 460 ODP 3 405TSC 1.15 1800 Prem Efficiency
129712U023 125 460 TEFC 3 444TSC 1.15 1800 Std Efficiency
129712U055 125 460 TEFC 3 444TSC 1.15 1800 Prem Efficiency
129712V017 150 460 ODP 3 444TSC 1.15 1800 Std Efficiency
129712V052 150 460 ODP 3 444TSC 1.15 1800 Prem Efficiency
129712V023 150 460 TEFC 3 445TSC 1.15 1800 Std Efficiency
129712V056 150 460 TEFC 3 445TSC 1.15 1800 Prem Efficiency
Frame Service
Part Number HP Voltage Type Phase RPM Special Notes
Size Factor
129712W017 200 460 ODP 3 445TSC 1.15 1800 Std Efficiency
129712W050 200 460 ODP 3 445TSC 1.15 1800 Prem Efficiency
129712W023 200 460 TEFC 3 445TSC 1.15 1800 Std Efficiency
129712W052 200 460 TEFC 3 445TSC 1.15 1800 Prem Efficiency
129466X008 250 460 ODP 3 445T 1.15 1800 Std Efficiency
129466X043 250 460 ODP 3 445T 1.15 1800 Prem Efficiency
129466X010 250 460 TEFC 3 445T 1.15 1800 Std Efficiency
129446X047 250 460 TEFC 3 445T 1.15 1800 Prem Efficiency
ELECTRICAL
Electric Motors
- Rotary Screw Compressors Cooling Fan Motors
- Read general ordering information (page 61) prior to ordering
Frame Service
Part Number HP Voltage Type Phase RPM Special Notes
Size Factor
4010 2 230/460 ODP 3 145T 1.15 1800 Std Efficiency
127466G043 2 230/460 ODP 3 145T 1.15 1800 Prem Efficiency
123885 2 230/460 TEFC 3 145T 1.15 1800 Std Efficiency
127466G048 2 230/460 TEFC 3 145T 1.15 1800 Prem Efficiency
4011 3 230460 ODP 3 182T 1.15 1800 Std Efficiency
127466H034 3 230/460 ODP 3 182T 1.15 1800 Prem Efficiency
123886 3 230/460 TEFC 3 182T 1.15 1800 Std Efficiency
127466H039 3 230/460 TEFC 3 182T 1.15 1800 Prem Efficiency
4012 5 230/460 ODP 3 184T 1.15 1800 Std Efficiency
127466I062 5 230/460 ODP 3 184T 1.15 1800 Prem Efficiency
123887 5 230/460 TEFC 3 184T 1.15 1800 Std Efficiency
127466I068 5 230/460 TEFC 3 184T 1.15 1800 Prem Efficiency
126839-K33 10 460 ODP 3 256T 1.15 1200 Std Efficiency
127466K083 10 460 ODP 3 256T 1.15 1200 Prem Efficiency
126840-K33 10 460 TEFC 3 256T 1.15 1200 Std Efficiency
127466K087 10 460 TEFC 3 256T 1.15 1200 Prem Efficiency
62 parts@quincycompressor.com
Electric Motors
- Reciprocating Compressors
• Read general ordering information (page 61) prior to ordering.
Frame Service
Part Number HP Voltage Type Phase RPM Special Notes
Size Factor
127466B003 1/3 115/230 TEFC 1 56 1.25 1750
4005-200 1/3 200 ODP 3 56 1.35 1750
123881-200 1/3 200 TEFC 3 48 1.35 1750
4005 1/3 230/160 ODP 3 56 1.35 1750
3998 1/2 115/230 ODP 1 56 1.25 1750
127466C006 1/2 115/230 TEFC 1 56 1.25 1750
4006-200 1/2 200 ODP 3 56 1.25 1750
123882-200 1/2 200 TEFC 3 56 1.25 1750
ELECTRICAL
4006 1/2 230/460 ODP 3 56 1.25 1750
123882 1/2 230/460 TEFC 3 56 1.25 1750
3999 3/4 115/230 ODP 1 56 1.25 1750
127466D001 3/4 115/230 TEFC 1 56 1.25 1750
4007-200 3/4 200 ODP 3 56 1.25 1750
123883-200 3/4 200 TEFC 3 56 1.25 1750
4007 3/4 230/460 ODP 3 56 1.25 1750
123883 3/4 230/460 TEFC 3 56 1.25 1750
4000 1 115/230 ODP 1 143T 1.15 1750
124515-042 1 115/230 TEFC 1 143T 1.15 1750
8095 1 200 ODP 3 143T 1.15 1750
124515-005 1 200 TEFC 3 143T 1.15 1750
124517-003 1 230/460 ODP 3 143T 1.15 1750
124515-006 1 230/460 TEFC 3 143T 1.15 1750 Don't use on 208 V
4001 1.5 115/230 ODP 1 145T 1.15 1750
127466H003 3 115/230 TEFC 1 184T 1.15 1750
8096 1.5 200 ODP 3 145T 1.15 1750
123884-200 1.5 200 TEFC 3 145T 1.15 1750
124517-042 1.5 230/460 ODP 3 145T 1.15 1750 Don't use on 208 V
123884 1.5 230/460 TEFC 3 145T 1.15 1750
4002 2 115/230 ODP 1 182T 1.15 1750
127466H007 3 230/460 TEFC 3 182T 1.15 1750
8097 2 200 ODP 3 145T 1.15 1750
123885-200 2 200 TEFC 3 145T 1.15 1750
124517-002 2 230/460 ODP 3 145T 1.15 1750
123885 2 230/460 TEFC 3 145T 1.15 1750
4003 3 115/230 ODP 1 184T 1.15 1750
127466H003 3 115/230 TEFC 1 184T 1.15 1750
8098 3 200 ODP 3 182T 1.15 1750
123887-200 3 200 TEFC 3 182T 1.15 1750
124517-006 3 230/460 ODP 3 182T 1.15 1750
123886 3 230/460 TEFC 3 182T 1.15 1750
127466I005 5 230 ODP 1 184T 1.15 1750
127466I006 5 230 TEFC 1 215T 1 1750
64 parts@quincycompressor.com
Duplex Automatic Alternating Panel (Controller)
Single Point Power Connection
• Prewired or packaged in a standard Nema 1 or Nema 4 enclosure
• Panels require only single point power supply connection, motor lead connection, and pressure
switch connection.
• For use with 2 compressors where one
compressor is the primary source of
air and a secondary compressor oper-
ates only during periods of high air
demand.
Features
- Automatic alternation
- 120 volt, control power transformer
- UL listed
ELECTRICAL
- IEC starter
NC03020014
5 NC05011514 NC05020014 NC05020034 NC05023034 NC05046034 NC05057534
7 1/2 NA NA NC07520034 NC07523034 NC07546034 NC07557534
10 NA NA NC10020034 NC10023034 NC10046034 NC10057534
15 NA NA NC15020034 NC15023034 NC15046034 NC15057534
20 NA NA NC20020034 NC20023034 NC20046034 NC20057534
25 NA NA NC25020034 NC25023034 NC25046034 NC25057534
Special Notes: 114902xxx is a starter panel that is a NEMA 1 panel with hour meter
included in the panel.
114903xxx is a starter panel that is a NEMA 4 panel with hour meter
included in the panel.
66 parts@quincycompressor.com
Duplex Automatic Alternating Panel (Controller)
Dual Point Power Connection
• Prewired or packaged in a standard Nema 1. Inquire for availability on Nema 4.
• Panels require dual point power supply connection, motor lead connection, and pressure switch
connection.
• For use with 2 compressors where one compressor is the primary source of air and a secondary
compressor operates only during periods of high air demand.
Features
- UL & cUL listed -Lead Select/Auto Selector switch gives
- IEC Rated Magnetic Starters user choice of compressor #1 or #2
- 120 volt, control power transformer lead or automatic alternation
ELECTRICAL
NEMA 1-Duplex Controller
- Reciprocating Compressors
Standard Panels
Part Number Based on hp and Supply Voltage Line or Motor Voltage
Control
Motor
Circuit 1-Phase, 60 Hz A.C. 3-Phase, 60 Hz, A.C.
hp Type
110-120 220-240 200 230 460 575
1/3 120V 90521B122 90521E321 90521B221 90521B321 90521B421 90521B521
1/2 120V 90521C122 90521F321 90521C221 90521C321 90521C421 90521C521
3/4 120V 90521D122 90521G321 90521D221 90521D321 90521D421 90521D521
1 120V 90521E122 90521E311 90521E221 90521E321 90521E421 90521E521
1 1/2 120V 90521F122 90521F311 90521F221 90521F321 90521F321 90521F521
2 120V 90521G122 90521G311 90521G221 90521G321 90521G421 90521G521
3 120V NA 90521H311 90521H221 90521H321 90521H421 90521H521
5 120V NA 90521I311 90521I221 90521I321 90521I421 90521I521
7 1/2 120V NA 90521J311 90521J221 90521J321 90521J421 90521J521
10 120V NA NA 90521K221 90521K321 90521K421 90521K521
15 120V NA NA 90521L221 90521L321 90521L421 90521L521
20 120V NA NA NA 90521M321 90521M421 90521M521
25 120V NA NA NA NA 90521N421 90521N521
30 120V NA NA NA NA 90521O421 90521O521
- Reciprocating Compressors
Deluxe
68 parts@quincycompressor.com
Duplex Panel - Optional Features
- Reciprocating Compressors
-Dual Point Power Connection
FACTORY INSTALLED
••AT TIME OF SALE••
Part Number Description Std Panel Deluxe Panel
111056-005 OP-GR, Switches X X
Hand-Off-Auto
111056-006 Gr, Hour Meter X X
ELECTRICAL
#21555-01 #128940 #129568-001
120 volts 1 5820 Tube, 1-1643 Connector, 1-3016 Nipple, 1 6698 Tee,
5897X
120/240 volts 1-7074 Flare Nut and 1-4516 Bushing
Footnote:
The Low Oil Pressure Shut-down Switch can be used on any compressor powered by 480V AC or 575V AC
through a magnetic starter provided:
First: That the Magnetic Starter with which it is to be used, is equipped with a 120V Ccontrol Circuit
Second: That a Control Circuit Transformer be supplied of sufficient capacity to furnish 13VA @ 120V or 26VA
@ 480V for the time delay, in additon to the requirements of the starter holding coil and other power
consuming components of the Control Circuit.
70 parts@quincycompressor.com
Enclosed Starters
- Reciprocating Compressors
• Enclosed starters standard NEMA 1 and NEMA 4
• Enclosed starters include line voltage coils.
• If 24 or 120 volt coil is required, call Quincy Parts and Accessories
Type of
Part Number Phase Voltage HP Coil Voltage
Enclosure
113100ABAE 3 200 1/3 Enclosed 200
113100ACAE 3 200 1/2 Enclosed 200
113100ADAE 3 200 3/4 Enclosed 200
113100AEAE 3 200 1 Enclosed 200
113100AFAE 3 200 1 1/2 Enclosed 200
ELECTRICAL
113100BGAE 3 200 2 Enclosed 200
113100ABAE 3 200 3 Enclosed 200
113100CHAE 3 200 5 Enclosed 200
113100EIAE 3 200 7 1/2 Enclosed 200
113100FJAE 3 200 10 Enclosed 200
113100HKAE 3 200 15 Enclosed 200
113100JLAE 3 200 20 Enclosed 200
113100KMAE 3 200 25 Enclosed 200
113100MOAE 3 200 30 Enclosed 200
113100ABBB 3 230 1/3 Enclosed 230
113100ACBB 3 230 1/2 Enclosed 230
113100AEBB 3 230 1 Enclosed 230
113100AFBB 3 230 1 1/2 Enclosed 230
113100BGBB 3 230 2 Enclosed 230
113100CHBB 3 230 3 Enclosed 230
113100DIBB 3 230 5 Enclosed 230
113100EJBB 3 230 7 1/2 Enclosed 230
113100FKBB 3 230 10 Enclosed 230
113100HLBB 3 230 15 Enclosed 230
113100JMBB 3 230 20 Enclosed 230
113100KNBB 3 230 25 Enclosed 230
113100LOBB 3 230 30 Enclosed 230
72 parts@quincycompressor.com
Open Starters
•With line voltage coil
Contactor
Contactor TType off
ype o Overload
O verload Coil
C oil
Phase
Phase Voltage
Voltage HP
H P Enclosure Number Voltage
Number
Number enclosure N umber Voltage
ELECTRICAL
113102-008 1 200 1/3 Open 113103-010 200
•When ordering open contacters or starters, specify motor full load amps
to properly size overload relay.
CContactor
ontactor TType
ype of
of OOverload
verload C oil
Coil
Phase
Phase V oltage
Voltage HP
HP
NNumber
umber eEnclosure
nclosure NNumber
umber VVoltage
oltage
•When ordering open contacters or starters, specify motor full load amps to
properly size overload relay.
74 parts@quincycompressor.com
Open Starters
• With 120 Volt Coil
#113102-043
ELECTRICAL
CContactor
ontactor TType
ype of
of OOverload
verload C oil
Coil
Phase
Phase Voltage
Voltage HP
HP
NNumber
umber eEnclosure
nclosure NNumber
umber VVoltage
oltage
•When ordering open contacters or starters, specify motor full load amps
to properly size overload relay.
•When ordering open contacters or starters, specify motor full load amps
to properly size overload relay.
76 parts@quincycompressor.com
Open Starters
•With 460 Volt Coil
Contactor
Contactor TType
ype of
of OOverload
verload CCoil
oil
Phase
Phase Voltage
Voltage HP
HP
NNumber
umber eEnclosure
nclosure NNumber
umber VVoltage
oltage
ELECTRICAL
113102-017 3 460 7 1/2 Open 113103-013 460
•When ordering open contacters or starters, specify motor full load amps
to properly size overload relay.
113103-003 0.63 1
113103-004 1 1.4
113103-011 6 8.5
113103-012 7.5 11
113103-013 10 14
113103-014 13 19
113103-015 18 24
113103-016 24 32
113103-017 18 25
113103-018 22 32
113103-019 29 42 G-K
K
113103-020 36 52 (65 mm)
113103-021 45 63
113103-022 60 80
113103-023 65 90
L-N
113103-024 80 110 (90 mm)
P
P-S
113103-025 100 135 (180 mm)
78 parts@quincycompressor.com
Open Contactors
Maximum 1 Phase
Amp Coil Maximum 3 Phase Horsepower
Part Number Size Horsepower
Rating Voltage
200V 230V 380/415V 460V 575V 115V 200V 230V
113102-007 110-120
113102-008 208
113102-009 220-240
B 10 2 2 - 5 7.5 1/2 3/4 1
113102-010 380-415
113102-011 440-480
113102-012 550-600
113102-013 110-120
113102-014 208
ELECTRICAL
113102-015 220-240
C 12 3 3 5 7.5 10 - 1.5 2
113102-016 380-415
113102-017 440-480
113102-018 550-600
113102-019 110-120
113102-020 208
113102-021 220-240
D 18 - 5 10 10 15 1 2 3
113102-022 380-415
113102-023 440-480
113102-024 550-600
113102-025 110-120
113102-026 208
113102-027 220-240
E 25 5 7.5 15 15 20 2 3 3
113102-028 380-415
113102-029 440-480
113102-030 550-600
113102-031 110-120
113102-032 208
113102-033 220-240
F 32 7.5 10 - 20 25 2 - 5
113102-034 380-415
113102-035 440-480
113102-036 550-600
113102-037 110-120
113102-038 208
113102-039 220-240
G 37 7.5 10 20 25 30 3 5 5
113102-040 380-415
113102-041 440-480
113102-042 550-600
113102-043 110-120
113102-044 208
113102-045 220-240
H 44 10 15 25 30 40
113102-046 380-415
113102-047 440-480
113102-048 550-600
113102-049 110-120
113102-050 208
ELECTRICAL
113102-051 220-240
J 60 15 20 30 40 40
113102-052 380-415
113102-053 440-480
113102-054 550-600
113102-055 110-120
113102-056 20 8
113102-057 220-240
K 69 20 25 40 50 50
113102-058 380-415
113102-059 440-480
113102-060 550-600
113102-061 110-120
113102-062 208
113102-063 220-240
L 85 25 30 50 60 75
113102-064 380-415
113102-065 440-480
113102-066 550-600
80 parts@quincycompressor.com
Open Contactors
Amp Coil Maximum 3 Phase Horsepower
Part Number Size
Rating Voltage 200V 230V 380/415V 460V 575V
113102-067 110-120
113102-068 208
113102-069 220-240
M 105 30 40 60 75 100
113102-070 380-415
113102-071 440-480
113102-072 550-600
113102-073 110-120
113102-074 208
ELECTRICAL
113102-075 220-240
N 140 40 50 75 100 125
113102-076 380-415
113102-077 440-480
113102-078 550-600
113102-079 110-120
113102-080 208
113102-081 220-240
P 170 50 60 100 125 12 5
113102-082 380-415
113102-083 440-480
113102-084 550-600
113102-085 110-120
113102-086 20 8
113102-087 220-240
R 200 60 75 12 5 15 0 150
113102-088 380-415
113102-089 440-480
113102-090 550-600
113102-091 110-120
113102-092 20 8
113102-093 220-240
S 300 75 100 15 0 200 200
113102-094 380-415
113102-095 440-480
113102-096 550-600
141590-01 9 2 - 3 3 5 5
141590-02 12 3 3 5 5 - 10
141590-03 16 - 5 7.5 10 10 -
141590-04 22 5 - 10 - 15 20
141590-05 32 10 10 15 20 20 25
141590-06 38 - - 20 - 25 30
141590-07 45 - 15 25 30 30 40
ELECTRICAL
141590-08 63 20 20 30 40 40 50
141590-09 75 - 25 - 50 50 60
141590-10 85 25 30 50 60 60 75
141590-11 110 30 40 60 75 75 -
141590-12 140 40 50 75 100 100 125
141590-13 170 50 - 100 - 125 150
141590-14 205 60 75 125 125 150 200
141590-15 250 75 100 150 150 200 250
141590-16 300 100 - 200 200 250 300
141590-17 400 125 150 250 250 300 400
Auxiliary Contacts
Newer Rotary Compressors
Works with Part Number 141590 Motor Starter
Maximum 3-Phase
Part Starter hp Motor Voltage
Number Size
208 230 460
140593-01 B 2 2 5
140593-02 C 3 3 7 1/2
140593-03 D 5 5 10
140593-04 E 5 7 1/2 15
140593-05 F 7 1/2 10 20
140593-06 G 7 1/2 10 25
140593-07 H 10 15 30
140593-08 J 15 20 40
140593-09 K 20 25 50 #140593-09
82 parts@quincycompressor.com
Overload Relays
- Rotary Screw Compressors
ELECTRICAL
141591-005 1.00 1.60 141591-034 0.40 0.63
141591-006 1.25 2.00 141591-035 0.63 1.00
141591-007 1.60 2.50 141591-036 0.80 1.25
141591-008 2.00 3.20 141591-037 1.00 1.60
141591-009 2.50 4.00 141591-038 1.25 2.00
141591-010 3.20 5.00 141591-039 1.60 2.50
141591-011 4.00 6.30 141591-040 2.00 3.20
141591-012 5.00 8.00 141591-041 2.50 4.00
141591-013 6.30 10.00 141591-042 3.20 5.00
141591-014 8.00 12.50 141591-043 4.00 6.30
141591-015 10.0 14.50 141591-044 5.00 8.00
141591-016 0.25 0.40 141591-045 6.30 10.00
141591-017 0.40 0.63 141591-046 8.00 12.50
141591-018 0.63 1.00 141591-047 10.00 16.00
141591-019 0.80 1.25 141591-048 12.50 20.00
141591-020 1.00 1.60 141591-049 16.00 25.00
141591-021 1.25 2.00 141591-050 20.00 32.00
141591-022 1.60 2.50 141591-051 25.00 36.00
141591-023 2.00 3.20 141591-052 32.00 40.00
141591-024 2.50 4.00 141591-053 36.00 45.00
141591-025 3.20 5.00 141591-054 11.00 17.00
141591-026 4.00 6.30 141591-055 12.50 20.00
141591-027 5.00 8.00 141591-056 16.00 25.00
141591-028 6.30 10.00 141591-057 20.00 32.00
141591-029 8.00 12.50 141591-058 25.00 40.00
84 parts@quincycompressor.com
Differential Pressure Switches
- Rotary Vacuum Pumps
• Measures the difference in pressure across an inlet filter, valve, piping, restriction, or
other vacuum component.
• Switch provides relay with adjustable range up to 3" HgV differential.
ELECTRICAL
Part Number Description
#160129-002
Reference Reference
#110512-001 #110512-004
Adjustable
Adjustable Adjustable
Adjustable Approximate
Approximate
Cut-out
Cut-out Cut-Out
Cut-out Differential
Differential
Part
PartNumber
Number Pressure
Pressure Pressure Non- Notes or
Notes or Special
Special FFeatures
eatures
Setting Pressure Non-Adjust-
Setting Range Adjustable
(psig)
(PSIG) Range (psig)
(PSIG) able(P(psig)
SIG)
110512-006 90 40-100 20
110512-008 80 40-100 20
110512-014 75 40-100 20
Form X (Pressure Release Valve)
110512-015 50 40-100 20
86 parts@quincycompressor.com
Automatic Pressure Switches - Adjustable Differential
- Rotary and Reciprocating Compressors
• NEMA Enclosure - Type One
• 1/4" NPT External
• Two Pole
ELECTRICAL
Standard Switch Standard Switch
with Release
Electrical Ratings
115 2 hp 3 hp 1 hp
230 3 hp 5 hp 1 hp
~
460/575 5 hp 5 hp N
A
Adjustable Adjustable
djustable A Approximate
djustable Approximate A pproximate
Approximate
Part CCut-out
ut-Out CCut-out
ut-Out Adjustable
A djustable A djustable
Adjustable
Part Notes oor
Notes rS pecial
Special
Number PPressure
ressure PPressure
ressure Differential
Differential Differential
D ifferential
N umber Fe a tur
Features e s
SSetting
etting RRange
ange Setting
S etting RRange
ange
(psig)
(PSIG) (psig)
(PSIG) ((psig)
PSIG) (psig)
(P SIG)
Electrical Ratings
Voltage 1-Phase AC 3-Phase AC DC
115 2 hp 3 hp 1 hp
230 3 hp 5 hp 1 hp
460-575 5 hp 5 hp Ñ
Vacuum Switches
88 parts@quincycompressor.com
"V" Belts for Rotary Compressors
128085-350 50.0" 3
BELTS/PULLEYS
128085-353 53.0" 3
128085-356 56.0" 3
128085-360 60.0" 3
128085-363 63.0" 3
"5VX" Sections Belts
128085-365 65.0" 3
Quantity
128085-367 67.0" 3 Set Outside
of Belts in
Part Number Length
Set
128085-442 42.5" 4
128770-356 56.0" 3
128085-445 45.0" 4
128770-363 63.0" 3
128085-447 47.5" 4
128770-367 67.0" 3
128085-450 50.0" 4
90 parts@quincycompressor.com
"V" Belts for Reciprocating Compressors
BELTS/PULLEYS
110258B092 95" 93.8" 110357B065 68 " 66.8"
*When P.D. is not known and O.D. of pulley can be measured, use this simple calculation. Example:
- If the pulley measures 11" O.D. and uses "A" section belt(s), subtract from 11" - .250. The P.D.
of that pulley equals 10.750.
- If the pulley uses "B" section belt(s), use .350 in place of .250 to get P.D. of the pulley.
92 parts@quincycompressor.com
Motor Pulleys and Bushings
- Reciprocating Compressors
• Assembled and factory standard units
• Additional sizes of motor pulleys and bushings are available.
Contact Quincy Parts and Accessories for different sizes
Three Groove for A or B Belts
BELTS/PULLEYS
8719 9.00 9.40
use 8461 Bushing
#111469-178
*When P.D. is not known and O.D. of pulley can be measured, use this simple calculation. Example:
- If the pulley measures 11" O.D. and uses "A" section belt(s), subtract from 11" - .250. The P.D.
of that pulley equals 10.750.
- If the pulley uses "B" section belt(s), use .350 in place of .250 to get P.D. of the pulley.
94 parts@quincycompressor.com
Replacement Heat Exchanger
- Rotary Compressors
•Aftercoolers for Rotary Screw QSI and QST
Saltwater aftercoolers
Stainless steel aftercoolers
Water-cooled aftercoolers
Air-cooled aftercoolers
QSI
124061-004 300 150 3 2 30 7/8 8 5/8
1000-1250
QSI 15,
COOLERS
124061-007 300 150 1 3/4 17 1/8 3 1/4 20 QSI
25, 30
-Not a stock item with Quincy allow for appropriate delivery time
-Not a stock item with Quincy allow for appropriate delivery time
#22709
Maximum
Pipe Size NPT Dimensions
Pressure
Part (Inches) (Inches) Used On
(psig)
(PSIG)
Number Models
Overall Shell
Oil Water Shell Tube
Length Diameter
*Early Models
*QSI 1000
22709-6 3 2 30 7/8 8 5/8 300 150
1250
COOLERS
Later Models
1 1/2
22709-17 1 17 19/32 5 1/4 300 150 QSI 245
1 1/4
96 parts@quincycompressor.com
Air-Cooled Aftercoolers - QSI and QST
- Rotary Compressors
COOLERS
*Use on 126500-1
#120034
#128785 #129134
98 parts@quincycompressor.com
Saltwater Fluid Coolers for QSI and QST
- Rotary Compressors
Pipe Size NPT Maximum
Dimensions (Inches)
Part (Inches) Pressure P(psig)
SIG Used On
Number Overall Shell Models
Oil Water Shell Tube
Length Diameter
20 SAE
124060-010 1 41 29/32 5 1/ 4 300 150 QSI 500
1 1/4 NPT
16 SAE
124060-011 1 29 29/32 5 1/4 30 0 150 QSI 370
1 1/4 NPT
24 SAE
141230-1 1 42 9/32 6 1/ 4 300 150 QSI 750
1 1/2 NPT
QSI
127266-7 3 2 77 5/8 8 5/8 300 150
1500 COOLERS
16 SAE
127266-15 1 29 29/32 5 1/4 300 150 QSI 370
1 1/4 NPT
20 SAE
127266-8 1 41 29/32 5 1/4 300 150 QSI 500
1 1/4 NPT
#22708
Early Models
22708-2 1 1/2 " 1" 40 13/16" 5 1/4" 300 150 *QSI 235
22708-3 2" 1 1/2" 41 1/8" 6 1/4" 300 150 *QSI 350
22708-4 2" 1 1/2" 53 1/8" 6 1/4" 300 150 *QSI 490
22708-5 3" 2" 54 7/8" 8 5/8" 300 150 *QSI 740
22708-6 3" 2" 54 7/8" 8 5/8" 300 150 *QSI 1000
22708-7 3" 2" 66 7/8" 8 5/8" 300 150 *QSI 1250
22708-8 3" 2" 78 7/8" 8 5/8" 300 150 *QSI 1500
Later Models
100 parts@quincycompressor.com
Air Cooled Oil Coolers for QSI and QST
- Rotary Compressors
#125715
COOLERS
126501 1 1/4" 1 1/4" 43 3/4" 39" 275 QSI 350
120031 2" 2" 43 7/8" 42 3/4" 150 QSI 490
120033 2" 2" 50 3/4" 53 1/2" 150 QSI 740
127320 2" 2" 45" 54 1/4" 275 QSI 740
121400 2" 2" 61" 61 3/8" 150 QSI 1000-1250-1500
126735 2" 2" 52 3/4" 31 3/4" 200 QSI 1000
126561 2 1/2" 2 1/2" 63" 63" 275 QSI 1250-1500
Connection Weight
Part Number Used on Models
Size (lbs.)
11579-001 1" 8 Models up to 20 SCFM
111579-002 1" 11 Models up to 35 SCFM
111579-003 1" 19 Models up to 75 SCFM
111579-004 1.25" 25 Models up to 100 SCFM
#111579-001
Copper Headers
Materials of Construction Copper Tubes
Aluminum Fins
Connection Weight
Part Number Used on Models
Size (lbs.)
COOLERS
102 parts@quincycompressor.com
Speciality Tools
- Reciprocating Compressors
QR-25® Service Tools
• High-quality tools make servicing QR-25 Air Compressors and Vacuum Pumps easier.
• The Valve Removal and the Hold down Screw Removal tools are designed for use with any standard
1/2" drive flex handle, "T" bar, or ratchet wrench (not included in the set.)
Part Tool Removes
Description Used on Models
Number Part Number
Diaphragm Body Removal Tool is rugged and will withstand the most severe usage.
Diaphragm Body
4-0-11 1559B 1559C 106, 108, 212, 216, 308, 310
Removal Tool
Striking Wrench
420HX 6548 206, 208, 210, 214, 306
(Used with 6843N)
Holddown Screw Removal Tool will withstand heavy hammer blows on the striking wrench to remove
the most stubborn screws without injury to slots or threads.
The striking wrench portion of the tool can also be used to remove valve cover caps.
Holddown Screw
Removal Tool 6662N 1878, 1879 320, 325, 330, 340, 390
(Used with 440HX)
Holddown Screw
#6664N
Removal Tool 6843N 6548 206, 208, 210, 214, 306
(Used with 420HX)
Head Bolt Removal Tool is sturdy and designed to install and remove Allen head bolts.
Valve Removal Tool is extra deep to accomodate suction and discharge valves.
Kit #112029-104
Part Number Description
104 parts@quincycompressor.com
Shaft Seal Installation Tool Kits for Lip Type Seals
- Rotary Compressors
• High-quality tools make servicing Quincy Air Compressors and Vacuum Pumps easier.
Kit #140454
Tool Kit Number Model Used On: Tool Kit Number Model Used On:
140414 QSI-500-700 with lip type seal 129414 QMB and QMT-all models
1 142063 Wear Ring Puller Assembly 1 142073 Wear Ring Puller Assembly
C Coolers I Indicators
Fluid, Air-Cooled: QSI, QST ........................ 101 Maintenance Indicators ................................. 14
Fluid, Saltwater: QSI, QST ............................ 99 Pressure Differential Indicators ..................... 14
Fluid, Stainless Steel: QSI, QST ................... 99 Isolators
Fluid, Water-Cooled: QSI, QST................... 100 Pad Isolators ................................................. 49
Crankcase Heater Spring Isolators ............................................. 49
Crankcase Heater ......................................... 55
K Kits
D Demisters Drain Valve Repair Kits ............................15-16
Exhaust Demisters .......................................... 2 Engine Throttle Control Kits .......................... 46
Drains Exhaust Filter Element Kits ............................. 2
Electronic Drains ........................................... 16 High Air/Temperature Kits ............................. 60
Manual Drains ............................................... 15 Hydraulic Unloader Repair Kit ....................... 38
Repair Kits................................................15-16 Inlet Valve Repair Kits ................................... 38
Lubricant Analysis Kit ................................... 54
F Filters Maintenance Kits: QR-25 .........................41-44
Air Pressure Regulators .................................. 3 Maintenance Kits: QT and QTS .................... 45
Automatic Control Line Filters ......................... 3 Min. Pressure Check Valves ......................... 19
Control Line Strainers ..................................... 3 Moisture Trap Repair Kits.............................. 39
Elements for Filters ......................................... 5 Pressure Regulator Repair Kit ........................ 3
Exhaust Demisters .......................................... 2 Pilot Valve Repair Kit..................................... 25
Exhaust Filter Element Kits ............................. 2 Piston Pin Removal Kit................................ 104
Hooded Filter/Silencers ................................... 4 Shaft Seal Installation Kit ............................ 105
Inlet Filter Elements: Recip, Vac. .................... 9 Sheave/Crank Shaft Removal Kit................ 104
Inlet Filters, Vacuum: Paper ............................ 8 Thermostat Valve Repair Kits........................ 40
Inlet Filters, Vacuum: Polyester....................... 9
Inlet Liquid Separators .................................. 11 L Lamps, Lenses, Bulbs
Intake Filters.................................................... 6 Bulb Replacements: Rotary .......................... 69
Intake Silencer ................................................ 6 Lamp Replacements: Rotary......................... 69
Manual Drain Line Filters ................................ 3 Lens Replacements: Rotary .......................... 69
Prefilter Foam Options .................................... 5 Lubricants
Oil Filter: QR-25 .............................................. 7 Lubricant Analysis Kit .................................... 54
Oil Filter: QR-100 ............................................ 7 Lubricants/Fluids: Reciprocating .................. 55
QTS Filters ......................................................6 Lubricants/Fluids: Rotary.............................. 54
Standard Filters: Recip.................................... 4 Recip. Lubrication/Capacities ........................ 56
Rotary Lubrication/Capacities ....................... 56
106 parts@quincycompressor.com
Index
M Meters S Switches
Hour Meters................................................... 12 Differential Pressure, Delta P: Vacuum ......... 85
Motors High Air Temp. Shut Down ............................ 60
Electric Motors: Recip. Products ..............63-64 High Air Temp. Shut Down Replacement ..... 60
Electric Motors: Rotary Products..............61-62 High Air Temp. Kits ........................................ 60
Motor Pulleys and Bushings.....................92-94 High Pressure: Adjust. Differential............87-88
High Pressure: Non-Adjust. Differential......... 86
P Panels High Pressure: Special.................................. 85
Automatic Alternating Panel, Single Point ...65-66
Automatic Alternating Panel, Dual Point......67-68 T Temperature
Demand-A-Matic Panels: Rotary.................. 57 High Air/WaterTemperature Kit...................... 60
Demand-A-Matic Panels: Rotary, Vacuum .... 58 Throttle
Demand-A-Matic Panels: QR-100, QDD....... 59 Engine Control Throttle Kit ............................ 46
Duplex Panel Optional Features ................... 69 Tools
Lamp Assemblies Replacements: Rotary ..... 69 Piston Pin Removal Tool ............................. 104
Lens Replacements: Rotary .......................... 69 QR-25 Service Tools ................................... 103
Light Replacements: Rotary .......................... 69 QRD Service Tools ...................................... 104
Prefilters Shaft Seal Installation Tool .......................... 105
Foam Prefilters ................................................ 5 Sheave/Crank Shaft Removal Kit................ 104
Pulleys
Pulleys for Electric Motors........................92-94 V Valves
Check Valve Bushings: Vacuum.................... 21
R Rails Check Valve Inserts: Vacuum........................ 22
Slide Rails for Electric Motors ....................... 64 Check Valves: Recip. .................................... 20
Receivers Check Valves: Rotary .................................... 18
Receivers for QR, QT, and QTS...............50-51 Check Valve Assemblies: Dual Control ......... 19
Vacuum Receivers-Horizontal ....................... 53 Drain Valves: Electronic ................................ 16
Vacuum Receivers-Vertical ........................... 52 Drain Valves: Manual .................................... 15
Regulators Drain Valves: Repair Kits..........................15-16
Air Pressure .................................................... 3 Minimum Pressure Check Valves.................. 18
Pilot Valves: Differential Ranges ................... 25
S Separators Pilot Valves: Recip......................................... 23
Inlet Liquid Separators .................................. 11 Pilot Valves: Repair Kit .................................. 25
Service Tools Pilot Valves: Replacement Springs ............... 25
See Tools Pilot Valves: QR Models................................ 23
Shims Pilot Valves: QT, QTS, QR, QRD .................. 26
Coupling Alignment Shims ........................... .37 Pressure Relief Valves .............................27-31
Silencers Vacuum Ball Valves: Quarter Turn ................ 32
Intake Silencer: Recip. .................................... 6 Vacuum Ball Valves: Flanged........................ 33
Slide Rails Vacuum Ball Valves: NPT.............................. 34
Electric Motors Slide Rails ............................ 64 Vacuum Butterfly Valves: Lug Body .............. 35
Starters Vacuum Butterfly Valves: Wafer Body ........... 36
Adjustable IEC Overload Relays ................... 78 Water Temperature Regulating Valves .......... 37
Enclosed Starters .....................................70-72
Open Starters ...........................................73-77
Contactors, Open .....................................79-81
Contactors, Replacement: Newer Rotary...... 82
Strainers
Control Line Strainers: Recip. ......................... 3