Professional Documents
Culture Documents
ELECTRICAL AND
FIRE EQUIPMENTS
SUBMITTED TO:
AR. HARVINDER KAUR.
SUBMITTED BY:
HARNEET KAUR (07)
SIMRAN RODE (09)
AKSHIT MADHUWAL (13)
GURPREET KAUR (18)
ARNAV KAUSHISH (29)
GAUTAM VERMA (34)
ELECTRICAL
WIRES EQUIPMENTS
INTRODUCTION
a flexible strand of metal.
Wire is commonly formed by drawing the metal through a hole in a die or draw plate. Wire gauges come in
various standard sizes, as expressed in terms of a gauge number or cross-sectional area.
MARKET SURVEY
POLYCAB
Polycab wire provides Green Wires. With the rise in global warming, the
world needs wires that are eco-friendly,. energy efficient, recyclable, has
low smoke density, and emits fewer toxic gases in extreme fire situations.
• High current carrying capacity , flexibility and fire retardancy
• Energy saving
• Glossy ans smooth surface finish
• Low emission of toxic gases
• Computerized cable design
• Free from hazardous substances
SINGLE CORE CABLES
• FR-LF wire is ECO & environment friendly to the
environment & suitable for use where high flexibility of
prime importance.
• Also suitable for indoor and outdoor installations in
industries, household appliances, power supply for
refrigeration, air conditioners and building electrification.
PRODUCT FEATURE
• Flame Retardant
• Smooth And Glossy Surface With Enhanced lubrication
properties FLEXIBLE BUNCHED
COPPER CONDUCTOR
• High abrasion resistance
• ROHS complaint PVC BASE INSULLATION
suitable for residential wiring either through embedded PVC BASE INSULLATION
circuit or on surface of wall.
• Suitable for high rise buildings, malls and hospitals. PVC SKIN INSULATION
TRIVO
5O1O1-WH 50102-WH 50111-WH 50103-WH 50112-WH
• The are five main types of fans in use i.e. ceiling fans, table fans, pedestal
fans, wall fans, ceiling mounting fans.
CEILING FANS
DETECTORS
• Heat detectors and smoke detectors are different types of?
sensors that react to fire
• Heat detectors respond to the change in temperature
caused by a fire, while smoke detectors respond to the
presence of smoke or carbon monoxide
• Smoke detectors can activate earlier in the development
of a fire, but they can also give false alarms
• Heat detectors are more reliable, but they do not detect
smoke
• Some buildings use a combination of both detectors
• Smoke can be detected either optically (photoelectric) or
by physical process (ionization).
• . Heat detectors have two main classifications of operation,
"rate-of-rise" and "fixed temperature".
614p photoelectric smoke
SMOKE AND HEAT
detector DETECTORS
• The 614P is capable of detecting the visible Technical Specifications
smoke produced by materials which smoulder
Operating Voltage 10 to 33Vdc
or burn slowly, such as soft furnishings, plastic
foam, or ‘smoke’ produced by overheated but Quiescent Current 60µA typ. 100µA.
unburnt PVC.
Alarm State Current1 5mA to 85mA (55°C)
• These detectors are particularly suitable for Alarm Voltage 4V to 7.6V Ext.
general applications and locations where cable
overheating may occur in electrical services
Powered Load 50mA, 28Vdc max. Min. 5mA.for LED
areas. Sensitivity 0.18 dB/m (4% Obs/m) (AS visibility. Max. current
7240.7:2004) must be externally
• They are suitable for use in sleeping areas and
limited
must be used in common paths to exits, to Reset Time 2 sec max.
give early warning of smoke that may make Remote Indicator E500 Mk2
escape difficult.
Series Relative Humidity 10% to 95% (non
• The novel design of the asymmetrical cond.)
sampling chamber and signal processing Ambient Temperature -20°C to +70°C
techniques stop nuisance alarms caused by
very small insects. Dimensions (incl. base) 54 x 127 mm (H x dia)
Weight (incl. base) 188g
• Smoke entering the sampling chamber
scatters the infrared light pulses onto a
• 614CH COMBINED HEAT AND CARBON MONOXIDE DETECTOR
Tyco 614CH detectors are generally faster than
ion-chamber and photoelectric smoke
detectors in responding to fires that start by
smouldering.
Technical Specifications
• Operating Voltage 10 to 33Vdc [
• They are also more tolerant of positioning and
• Quiescent Current 70µA typ. 80µA max.
can be mounted in locations where there are
likely to be obstacles to free smoke plume • Alarm State Current2 5mA to 85mA (55°C)
movement. • Alarm Voltage 4V to 7.6V
• These detectors are particularly well suited for • Alarm Threshold 38ppm
sleeping areas, storage areas and applications • CO, A1R heat Ext. Powered Load 50mA, 28Vdc
where smoke detectors are prone to nuisance max.
alarms. • Reset Time 2 sec max.
• Incorporation of a Class A1R rate of rise heat • Remote Indicator E500 Mk
detector within the 614CH provides an • 2 Series Relative Humidity 15 to 90% (non cond.)
additional mode of detection, allowing the
detector to be used in a wide variety of • Ambient Temp3 0°C to +50°C
applications where combined risks mean that • Dimensions (incl. base) 54 x 127 mm (H x dia)
CO detection alone would be insufficient. • Weight (incl. base) 200g
• The integrated rate-of-rise heat detector -Min. 5mA for LED visibility. Max. current must be externally limited.
enhances the sensitivity of the carbon -Detector may be stored between -20°C and +55°C without
monoxide detector if a rapid change of exposure to condensation or icing.
temperature is detected by the detector’s
IONISATION SMOKE DETECTOR
• The 614I detectors are offered for old
SMOKE AND HEAT
specifications which still call for Technical SpecificationsDETECTORS
ionisation smoke detectors. Operating Voltage 12 to 33Vdc
• The 614CH and 614P detectors offer Quiescent Current 60µA typ. 67µA
max.
improved performance, significantly
fewer nuisance alarms and Alarm State Current4 5mA to
environmental compatibility for smoke 85mA
detection applications. Alarm Voltage 4V to 7.6V
Ext. Powered Load 50mA, 28Vdc
• The 614I nevertheless offers detection max.
of visible and invisible fire aerosols Ionisation Source <33kBq (Am241)
(products of combustion) and are Alarm Threshold y=0.8 (0.32 MIC X) Min. 5mA for LED
therefore capable of detecting the early Reset Time 2 sec max.
presence of hot smouldering and flaming visibility. Max. current
fires, such as wood, paper etc. Remote Indicator E500 Mk2 Series must be externally
Relative Humidity 10% to 95% (non limited
• They use a dual ionisation chamber in cond.)
which the air is ionised by a single Ambient Temperature -20°C to
radioactive source. +70°C
• The presence of smoke in the sampling
Dimensions (incl. base) 54 x 127 mm
(H x dia)
chamber causes a change in the balance Weight (incl. base) 200g
voltage, between the two chambers
CSIRO ActivFire Listed afp-1716
• . This is then compared against an alarm FPANZ Listed VF/343
SMOKE AND HEAT
614T HEAT DETECTOR
• Tyco 614T heat detectors use a fast Technical SpecificationsDETECTORS
response thermistor based design. Operating Voltage 11 to 32Vdc
Quiescent Current 85µA typ.
• The fixed temperature sensing 100µA max
thermistor readily tracks the local . Alarm State Current 5 5mA to
80mA
ambient temperature, thus quickly,
Alarm State Voltage 6 3.0V to
accurately and consistently 12.4V
identifying when a fixed temperature Remote Indicator E500 Mk2
is exceeded. Series Relative Humidity 10% to
5. Min. 5mA for LED
• Rate-of-rise detection is achieved by
95% (non cond.)
Ambient Temperature
visibility; max. current
comparing the response of two must be externally
Types A, B -10°C to +45°C
limited. 6. Min. voltage
thermistors, one of which has a Types C, D -10°C to +75°C
with remote indicator
slower thermal response. Storage Temperature -10°C to
shorted @ 5mA. Max
+75°C
• By combining accurate thermistors Dimensions (incl. base) 54 x 127
@ 80mA without
remote indicator
with proper physical placement, this mm (H x dia)
connected
patented rate-of-rise detection design Weight (incl. base) 174g
achieves a high level of performance
not normally available with
The5B5BUNIVERSAL
Universal Base BASE
is suitable for indoor SMOKE AND HEAT
applications of the Tyco 614 series of DETECTORS
detectors.It provides excellent space for cable
access and terminations. Its larger skirt makes
it suitable as a replacement for the earlier
M614 base to cover any paint rims or covering
a larger hole in the ceiling.
• Features
MODEL KFAHQ-2.5
CAPACITY 2.5lbs
HEIGHT,WEIGHT 39CM, 3.1KG
SIZES 2.5, 10, 20 lbs
OPERATING TEMP. -40 TO +49 DEGREE
CELCIUS
PRESSURE 195 PSI
DISCHARGE TIME 8-10 SEC
RANGE 4-5 M
PRICE RANGE 6000-20000
IDEAL USE Homes, Offices,
Building Warehouses,
Farms, Wood Working
Areas etc.
ABC Fire Extinguishers
(Powder Based)
MODEL KFAHQ-2.5
CAPACITY 1kg
HEIGHT,WEIGHT 325mm,1kg
SIZES 2,6,4,9 kg
OPERATING TEMP. -30 °C to +60 °C
PRESSURE 195 PSI
DISCHARGE TIME 9 Sec.
RANGE 2M
PRICE RANGE 1000- 9000
IDEAL USE Hotels, Schools< offices
CO2 Fire Extinguishers
MODEL KFCRQ-2
CAPACITY 2kg
HEIGHT,WEIGHT 580 mm,7 or 8 kg
SIZES 9.5 or 10.5 kg
OPERATING TEMP. -30 °C to +60 °C
PRESSURE 60 / 105 / 205 bar
DISCHARGE TIME 9 Sec.
RANGE 2M
PRICE RANGE 2000-10000
IDEAL USE Hotels, Schools< offices
FIRE EQUIPMENTS
WATER SPRINKLERS
• The prices of various types of sprinklers and various companies is as follows:
Mild steel ceiling mounted Fire sprinkler head Forged brass sprinkler
upright type fire sprinkler, 68 Startech fire systems S.H. hardware and tools
degree
MRP= 250/piece MRP= 250/piece
Fire oxine safety industries
MRP= 75/piece