Professional Documents
Culture Documents
Inspection Task Report No. - 2
Inspection Task Report No. - 2
PNEUMATIC TEST
2 Inspection Activity Description
The pneumatic test is a pressure test you can use air or nitrogen. In our test we use nitrogen. In this
test the material was covered with tape, then gas pressure is raised as what mention in procedure.
Then, soap and water are applied on the tape. If there any gas leak, it will show air bubbles produced
from the soap.
3 RFI No
RFI No.: AIP-MIC-MECH-245
4 Controlling document
PDO approved ITP No. & Rev. No.: AIP-C3100000111-ITP-18 Rev.1
PDO approved Drawing No. & Rev. No.: RMT-28-103440-MP-SITE-JS0094-0011-00-01
5 Measuring devices used
Pressure Gauges.
Acceptance
6 Criteria
PDO approved Projects Specification No. & Rev. No.: SP1173 VER3.0/SP2051 VER.5
Reference Documents/Standards/Specifications: AIP/C3100000111/CONM/27 Rev.0
7 Inspection Report used
NA
8 Actual values following inspection
The Pressure was 17.6 bar and there is no leaks found.
9 Observations (if any)
10 Clarifications Required
1. Why we use nitrogen instead of air ?
11 Trainee Name: Adham Discipline: Date: 5/3/23 Signature:
12 Coach Name: Saif Ref. Ind. Date: 5/3/23 Signature: